From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm/mm/proc-fa526.S | 213 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 213 insertions(+) create mode 100644 arch/arm/mm/proc-fa526.S (limited to 'arch/arm/mm/proc-fa526.S') diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S new file mode 100644 index 0000000000..2c73e0d47d --- /dev/null +++ b/arch/arm/mm/proc-fa526.S @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 + * + * Written by : Luke Lee + * Copyright (C) 2005 Faraday Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas + * + * These are the low level assembler for performing cache and TLB + * functions on the fa526. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "proc-macros.S" + +#define CACHE_DLINESIZE 16 + + .text +/* + * cpu_fa526_proc_init() + */ +ENTRY(cpu_fa526_proc_init) + ret lr + +/* + * cpu_fa526_proc_fin() + */ +ENTRY(cpu_fa526_proc_fin) + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x000e @ ............wca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + nop + nop + ret lr + +/* + * cpu_fa526_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 4 + .pushsection .idmap.text, "ax" +ENTRY(cpu_fa526_reset) +/* TODO: Use CP8 if possible... */ + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches + mcr p15, 0, ip, c7, c10, 4 @ drain WB +#ifdef CONFIG_MMU + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs +#endif + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x1100 @ ...i...s........ + bic ip, ip, #0x0800 @ BTB off + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + nop + nop + ret r0 +ENDPROC(cpu_fa526_reset) + .popsection + +/* + * cpu_fa526_do_idle() + */ + .align 4 +ENTRY(cpu_fa526_do_idle) + ret lr + + +ENTRY(cpu_fa526_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + ret lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_fa526_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 4 +ENTRY(cpu_fa526_switch_mm) +#ifdef CONFIG_MMU + mov ip, #0 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache +#else + mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache +#endif + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed + mcr p15, 0, ip, c7, c10, 4 @ data write barrier + mcr p15, 0, ip, c7, c5, 4 @ prefetch flush + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB +#endif + ret lr + +/* + * cpu_fa526_set_pte_ext(ptep, pte, ext) + * + * Set a PTE and flush it out + */ + .align 4 +ENTRY(cpu_fa526_set_pte_ext) +#ifdef CONFIG_MMU + armv3_set_pte_ext + mov r0, r0 + mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain WB +#endif + ret lr + + .type __fa526_setup, #function +__fa526_setup: + /* On return of this routine, r0 must carry correct flags for CFG register */ + mov r0, #0 + mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 +#ifdef CONFIG_MMU + mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 +#endif + mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM + + mov r0, #1 + mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c5, 4 @ prefetch flush + + mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client + mcr p15, 0, r0, c3, c0 @ load domain access register + + mrc p15, 0, r0, c1, c0 @ get control register v4 + ldr r5, fa526_cr1_clear + bic r0, r0, r5 + ldr r5, fa526_cr1_set + orr r0, r0, r5 + ret lr + .size __fa526_setup, . - __fa526_setup + + /* + * .RVI ZFRS BLDP WCAM + * ..11 1001 .111 1101 + * + */ + .type fa526_cr1_clear, #object + .type fa526_cr1_set, #object +fa526_cr1_clear: + .word 0x3f3f +fa526_cr1_set: + .word 0x397D + + __INITDATA + + @ define struct processor (see and proc-macros.S) + define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort + + .section ".rodata" + + string cpu_arch_name, "armv4" + string cpu_elf_name, "v4" + string cpu_fa526_name, "FA526" + + .align + + .section ".proc.info.init", "a" + + .type __fa526_proc_info,#object +__fa526_proc_info: + .long 0x66015261 + .long 0xff01fff1 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + initfn __fa526_setup, __fa526_proc_info + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF + .long cpu_fa526_name + .long fa526_processor_functions + .long fa_tlb_fns + .long fa_user_fns + .long fa_cache_fns + .size __fa526_proc_info, . - __fa526_proc_info -- cgit v1.2.3