From 50ba0232fd5312410f1b65247e774244f89a628e Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sat, 18 May 2024 20:50:36 +0200
Subject: Merging upstream version 6.8.9.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 .../boot/dts/qcom/msm8916-longcheer-l8150.dts      | 74 +++++++++++++++++++---
 1 file changed, 65 insertions(+), 9 deletions(-)

(limited to 'arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts')

diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index aad4a2e5e6..3a3e794c02 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -25,17 +27,45 @@
 
 	/*
 	 * For some reason, the signed wcnss firmware is not relocatable.
-	 * It must be loaded at 0x8b600000. All other firmware is relocatable,
-	 * so place wcnss at the fixed address and then all other firmware
-	 * regions will be automatically allocated at a fitting place.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
 	 */
 	reserved-memory {
+		/delete-node/ mpss@86800000;
 		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
 	};
 
 	gpio-keys {
@@ -226,6 +256,29 @@
 	status = "okay";
 };
 
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -238,10 +291,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -255,14 +304,21 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &venus {
-- 
cgit v1.2.3