From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 754 +++++++++++++++++++++ 1 file changed, 754 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi (limited to 'arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi') diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi new file mode 100644 index 0000000000..06f8ff6241 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -0,0 +1,754 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include + +/ { + divclk1_cdc: divclk1 { + compatible = "gpio-gate-clock"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk1_default>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + key-dome { + label = "Home"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + irled { + compatible = "pwm-ir-tx"; + pwms = <&pm8994_lpg 1 1000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&irled_default>; + }; + + reserved-memory { + memory@88800000 { + reg = <0x0 0x88800000 0x0 0x1400000>; + no-map; + }; + + /* This platform has all PIL regions offset by 0x1400000 */ + /delete-node/ mpss@88800000; + mpss_mem: mpss@89c00000 { + reg = <0x0 0x89c00000 0x0 0x6200000>; + no-map; + }; + + /delete-node/ adsp@8ea00000; + adsp_mem: adsp@8fe00000 { + reg = <0x0 0x8fe00000 0x0 0x1b00000>; + no-map; + }; + + /delete-node/ slpi@90500000; + slpi_mem: slpi@91900000 { + reg = <0x0 0x91900000 0x0 0xa00000>; + no-map; + }; + + /delete-node/ gpu@90f00000; + gpu_mem: gpu@92300000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x92300000 0x0 0x2000>; + no-map; + }; + + /delete-node/ venus@91000000; + venus_mem: venus@92400000 { + reg = <0x0 0x92400000 0x0 0x500000>; + no-map; + }; + + ramoops@92900000 { + compatible = "ramoops"; + reg = <0x0 0x92900000 0x0 0x100000>; + no-map; + + record-size = <0x8000>; + console-size = <0x80000>; + ftrace-size = <0x20000>; + pmsg-size = <0x40000>; + }; + + /delete-node/ rmtfs; + rmtfs@f6c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /delete-node/ mba@91500000; + mba_mem: mba@f6f00000 { + reg = <0x0 0xf6f00000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v2_tp: vdd-3v2-tp { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v2_tp"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr>; + + gpio = <&tlmm 73 0>; + enable-active-high; + }; + + vdd_3v3: rome-vreg { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr_bbyp>; + + gpio = <&pm8994_gpios 9 0>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&rome_enable_default>; + + /* Required by QCA6174a - vddpe-3v3 */ + regulator-always-on; + }; + + /* WL_EN pin defined as a fixed regulator */ + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <400000>; + + nfc: nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp2_i2c3 { + status = "okay"; + + typec: typec@47 { + compatible = "ti,tusb320l"; + reg = <0x47>; + interrupt-parent = <&tlmm>; + interrupts = <63 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + /* MSM_TS */ +}; + +&blsp1_uart2 { + status = "okay"; + label = "QCA_UART"; + + bluetooth: bluetooth { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; +}; + +&mdss_dsi0_out { + status = "okay"; + + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + + vcca-supply = <&vreg_l28a_0p925>; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + status = "okay"; + + pll-supply = <&vreg_l12a_1p8>; +}; + +&pcie0 { + status = "okay"; + + /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_resin { + status = "okay"; + + linux,code = ; +}; + +&pm8994_lpg { + status = "okay"; + + qcom,power-source = <1>; +}; + +&pmi8994_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + +&slpi_pil { + status = "okay"; + + px-supply = <&vreg_lvs2a_1p8>; +}; + +&usb3 { + status = "okay"; + extcon = <&typec>; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + extcon = <&typec>; + + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; +}; + +&hsusb_phy1 { + status = "okay"; + extcon = <&typec>; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&venus { + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + /* Required by QCA6174a - vdd-core */ + regulator-always-on; + }; + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + + /* Required by QCA6174a - vddio */ + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p8: l6 { + regulator-name = "vreg_l6a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l19a_3p3: l19 { + regulator-name = "vreg_l19a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* Required by QCA6174a - vddio-xtal */ + regulator-always-on; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + vreg_apc_0p8: s11 { + qcom,saw-leader; + regulator-name = "vreg_apc_0p8"; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd_gfx"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1015000>; + regulator-enable-ramp-delay = <500>; + }; +}; + +&pm8994_gpios { + irled_default: irled-default-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + + wlan_en_default: wlan-en-state { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + + rome_enable_default: rome-enable-state { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + divclk1_default: divclk1-state { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + power-source = ; + qcom,drive-strength = ; + }; + + divclk4_pin_a: divclk4-state { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&tlmm { + mdss_dsi_default: mdss-dsi-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss-dsi-sleep-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_default: mdss-te-default-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_sleep: mdss-te-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_default: nfc-default-state { + pins = "gpio12", "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; +}; -- cgit v1.2.3