From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Thu, 11 Apr 2024 10:27:49 +0200
Subject: Adding upstream version 6.6.15.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/arm64/boot/dts/qcom/pm660.dtsi | 205 ++++++++++++++++++++++++++++++++++++
 1 file changed, 205 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi

(limited to 'arch/arm64/boot/dts/qcom/pm660.dtsi')

diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 0000000000..98dc04962f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm660-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm660_temp>;
+
+			trips {
+				pm660_alert0: pm660-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm660_crit: pm660-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
+		};
+
+		pm660_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm660_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm660_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "xo_therm";
+			};
+
+			channel@4d {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "msm_therm";
+			};
+
+			channel@4e {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "emmc_therm";
+			};
+
+			channel@4f {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pa_therm0";
+			};
+
+			channel@50 {
+				reg = <ADC5_AMUX_THM4_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pa_therm1";
+			};
+
+			channel@51 {
+				reg = <ADC5_AMUX_THM5_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "quiet_therm";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 3>;
+				label = "vcoin";
+			};
+		};
+
+		pm660_gpios: gpio@c000 {
+			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660_gpios 0 0 13>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660_spmi_regulators: regulators {
+			compatible = "qcom,pm660-regulators";
+		};
+	};
+};
-- 
cgit v1.2.3