From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 860 +++++++++++++++++++++++ 1 file changed, 860 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts (limited to 'arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts') diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts new file mode 100644 index 0000000000..3342cb0480 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -0,0 +1,860 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include +#include + +#include "sc7180.dtsi" + +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &ipa_fw_mem; + +/ { + model = "Acer Aspire 1"; + compatible = "acer,aspire1", "qcom,sc7180"; + chassis-type = "laptop"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + zap_mem: zap-shader@80840000 { + reg = <0x0 0x80840000 0 0x2000>; + no-map; + }; + + venus_mem: venus@85b00000 { + reg = <0x0 0x85b00000 0 0x500000>; + no-map; + }; + + mpss_mem: mpss@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + adsp_mem: adsp@8e400000 { + reg = <0x0 0x8e400000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: wlan@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&_sd_mode_default>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86_bridge 1000000>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&soc_bkoff_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p2: bridge-1p2-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p2_en_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p8: bridge-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_l8c_1p8>; + + gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p8_en_default>; + pinctrl-names = "default"; + }; + + reg_codec_3p3: codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "codec_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_audio_en_default>; + pinctrl-names = "default"; + }; + + reg_lcm_3p3: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcm_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_lcm_en_default>; + pinctrl-names = "default"; + }; + + reg_tp_3p3: touchpad-regulator { + compatible = "regulator-fixed"; + regulator-name = "tp_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tp_en_default>; + pinctrl-names = "default"; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* embedded-controller@76 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* + * NOTE: DSDT defines two possible touchpads, other one is + * + * reg = <0x15>; + * hid-descr-addr = <0x1>; + */ + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + vdd-supply = <®_tp_3p3>; + + interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_touchpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_keyboard_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-0 = <&codec_irq_default>; + pinctrl-names = "default"; + + AVDD-supply = <&vreg_l15a_1p8>; + MICVDD-supply = <®_codec_3p3>; + VBAT-supply = <®_codec_3p3>; + DBVDD-supply = <&vreg_l15a_1p8>; + LDO1-IN-supply = <&vreg_l15a_1p8>; + + /* + * NOTE: The board has a path from this codec to the + * DMIC microphones in the lid, however some of the option + * resistors are absent and the microphones are connected + * to the SoC instead. + * + * If the resistors were to be changed by the user to + * connect the codec, the following could be used: + * + * realtek,dmic1-data-pin = <1>; + * realtek,dmic1-clk-pin = <1>; + */ + + realtek,jd-src = <1>; + }; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + sn65dsi86_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&bridge_en_default>, + <&edp_bridge_irq_default>, + <&bridge_suspend_default>; + pinctrl-names = "default"; + + vpll-supply = <®_brij_1p8>; + vccio-supply = <®_brij_1p8>; + vcca-supply = <®_brij_1p2>; + vcc-supply = <®_brij_1p2>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <®_lcm_3p3>; + backlight = <&backlight>; + hpd-absent-delay-ms = <200>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&zap_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l4a_0p8>; + status = "okay"; +}; + +&pm6150_adc { + channel@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + label = "thermistor"; + }; + + channel@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + label = "charger_thermistor"; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6150_pon { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&uart3 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + peer-hub = <&usb_hub_3_x>; + }; + + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = ; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&qup_i2c2_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c4_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c9_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c10_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&tlmm { + /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>; + + amp_sd_mode_default: amp-sd-mode-deault-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_en_default: bridge-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_suspend_default: bridge-suspend-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + codec_irq_default: codec-irq-deault-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_bridge_irq_default: edp-bridge-irq-default-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hid_keyboard_default: hid-keyboard-default-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hid_touchpad_default: hid-touchpad-default-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + function = "gpio"; + bias-pull-down; + }; + + rts-pins { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + function = "gpio"; + bias-pull-down; + }; + + tx-pins { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + function = "gpio"; + bias-pull-up; + }; + + rx-pins { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + }; + }; + + reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state { + pins = "gpio19"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_lcm_en_default: reg-lcm-en-deault-state { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_audio_en_default: reg-audio-en-deault-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tp_en_default: reg-tp-en-deault-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + soc_bkoff_default: soc-bkoff-deault-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <16>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; -- cgit v1.2.3