From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 1032 +++++++++++++++++++++++++++++ 1 file changed, 1032 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-crd.dts') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts new file mode 100644 index 0000000000..ffc4406422 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -0,0 +1,1032 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Qualcomm SC8280XP CRD"; + compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; + + aliases { + i2c4 = &i2c4; + i2c21 = &i2c21; + serial0 = &uart17; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_0_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&usb_0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_1_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_reg_en>; + + regulator-boot-on; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_BL"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VPH_PWR_WLAN"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "SDX_VPH_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wwan_sw_en>; + + regulator-boot-on; + }; + + reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + usb0-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb0_sbu_default>; + + mode-switch; + orientation-switch; + + port { + usb0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb1_sbu_default>; + + mode-switch; + orientation-switch; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = ; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-boot-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-boot-on; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; +}; + +&dispcc0 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; + }; +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp0 { + status = "okay"; +}; + +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; +}; + +&mdss0_dp1 { + status = "okay"; +}; + +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + +&mdss0_dp3 { + compatible = "qcom,sc8280xp-edp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + backlight = <&backlight>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss0_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss0_dp3_phy { + compatible = "qcom,sc8280xp-edp-phy"; + + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_default>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + +&i2c21 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c21_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; + }; +}; + +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie3a { + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&sdc2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3d>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + orientation-switch; + + status = "okay"; +}; + +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + +&usb_0_role_switch { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + +&usb_1_role_switch { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio2"; + function = "normal"; + }; +}; + +&pmc8280_2_gpios { + wwan_sw_en: wwan-sw-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + edp_reg_en: edp-reg-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + drive-strength = <16>; + bias-disable; + }; + + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + disable-pins { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n-pins { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset-pins { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio131"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + tpad_default: tpad-default-state { + int-n-pins { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio175"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + + usb0_sbu_default: usb0-sbu-state { + oe-n-pins { + pins = "gpio101"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio164"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + mode-pins { + pins = "gpio167"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; + + usb1_sbu_default: usb1-sbu-state { + oe-n-pins { + pins = "gpio48"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio47"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + mode-pins { + pins = "gpio50"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; +}; -- cgit v1.2.3