From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 5222 ++++++++++++++++++++++++++++++++ 1 file changed, 5222 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp.dtsi (limited to 'arch/arm64/boot/dts/qcom/sc8280xp.dtsi') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi new file mode 100644 index 0000000000..b808151317 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -0,0 +1,5222 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-x1c"; + reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-x1c"; + reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-x1c"; + reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x1c"; + reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8280xp", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sc8280xp-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sc8280xp-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sc8280xp-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sc8280xp-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sc8280xp-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sc8280xp-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sc8280xp-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8280xp-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sc8280xp-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sc8280xp-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sc8280xp-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sc8280xp-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 32)>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <(384000 * 32)>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <(480000 * 32)>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + opp-peak-kBps = <(576000 * 32)>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <(672000 * 32)>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <(768000 * 32)>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <(864000 * 32)>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(960000 * 32)>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <(1075200 * 32)>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1171200 * 32)>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <(1267200 * 32)>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-peak-kBps = <(1363200 * 32)>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(1536000 * 32)>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <(1612800 * 32)>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <(768000 * 32)>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <(864000 * 32)>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <(960000 * 32)>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <(1171200 * 32)>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <(1267200 * 32)>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(1363200 * 32)>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1459200 * 32)>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1612800 * 32)>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + reserved-region@80000000 { + reg = <0 0x80000000 0 0x860000>; + no-map; + }; + + cmd_db: cmd-db-region@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + reserved-region@80880000 { + reg = <0 0x80880000 0 0x80000>; + no-map; + }; + + smem_mem: smem-region@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved-region@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + reserved-region@83b00000 { + reg = <0 0x83b00000 0 0x1700000>; + no-map; + }; + + reserved-region@85b00000 { + reg = <0 0x85b00000 0 0xc00000>; + no-map; + }; + + pil_adsp_mem: adsp-region@86c00000 { + reg = <0 0x86c00000 0 0x2000000>; + no-map; + }; + + pil_nsp0_mem: cdsp0-region@8a100000 { + reg = <0 0x8a100000 0 0x1e00000>; + no-map; + }; + + pil_nsp1_mem: cdsp1-region@8c600000 { + reg = <0 0x8c600000 0 0x1e00000>; + no-map; + }; + + reserved-region@aeb00000 { + reg = <0 0xaeb00000 0 0x16600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_nsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_nsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + ethernet0: ethernet@20000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC0_AXI_CLK>, + <&gcc GCC_EMAC0_SLV_AHB_CLK>, + <&gcc GCC_EMAC0_PTP_CLK>, + <&gcc GCC_EMAC0_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x4c0 0xf>; + power-domains = <&gcc EMAC_0_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&pcie2a_phy>, + <&pcie2b_phy>, + <&pcie3a_phy>, + <&pcie3b_phy>, + <&pcie4_phy>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qup2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xa3 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + uart17: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = ; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c21: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x563 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = ; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x83 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = ; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; + }; + + pcie4: pcie@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x30000000 0x0 0xf1d>, + <0x0 0x30000f20 0x0 0xa8>, + <0x0 0x30001000 0x0 0x1000>, + <0x0 0x30100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>, + <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <6>; + num-lanes = <1>; + + interrupts = , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>, + <&gcc GCC_CNOC_PCIE4_QX_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf", + "cnoc_qx"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_4_GDSC>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie4_phy: phy@1c06000 { + compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x01c06000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_CLKREF_CLK>, + <&gcc GCC_PCIE4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>, + <&gcc GCC_PCIE_4_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_4_GDSC>; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3b: pcie@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x32000000 0x0 0xf1d>, + <0x0 0x32000f20 0x0 0xa8>, + <0x0 0x32001000 0x0 0x1000>, + <0x0 0x32100000 0x0 0x100000>, + <0x0 0x01c0b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>, + <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3B_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3B_GDSC>; + + phys = <&pcie3b_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3b_phy: phy@1c0e000 { + compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, + <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3B_PIPE_CLK>, + <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_3B_GDSC>; + + resets = <&gcc GCC_PCIE_3B_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_3b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3a: pcie@1c10000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x34000000 0x0 0xf1d>, + <0x0 0x34000f20 0x0 0xa8>, + <0x0 0x34001000 0x0 0x1000>, + <0x0 0x34100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>, + <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <4>; + num-lanes = <4>; + + interrupts = , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, + <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3A_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3A_GDSC>; + + phys = <&pcie3a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3a_phy: phy@1c14000 { + compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; + reg = <0x0 0x01c14000 0x0 0x2000>, + <0x0 0x01c16000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, + <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, + <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3A_PIPE_CLK>, + <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_3A_GDSC>; + + resets = <&gcc GCC_PCIE_3A_PHY_BCR>; + reset-names = "phy"; + + qcom,4ln-config-sel = <&tcsr 0xa044 1>; + + #clock-cells = <0>; + clock-output-names = "pcie_3a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie2b: pcie@1c18000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c18000 0x0 0x3000>, + <0x0 0x38000000 0x0 0xf1d>, + <0x0 0x38000f20 0x0 0xa8>, + <0x0 0x38001000 0x0 0x1000>, + <0x0 0x38100000 0x0 0x100000>, + <0x0 0x01c1b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>, + <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <3>; + num-lanes = <2>; + + interrupts = , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, + <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_2B_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2B_GDSC>; + + phys = <&pcie2b_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2b_phy: phy@1c1e000 { + compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c1e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, + <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, + <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_2B_PIPE_CLK>, + <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_2B_GDSC>; + + resets = <&gcc GCC_PCIE_2B_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_2b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie2a: pcie@1c20000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c20000 0x0 0x3000>, + <0x0 0x3c000000 0x0 0xf1d>, + <0x0 0x3c000f20 0x0 0xa8>, + <0x0 0x3c001000 0x0 0x1000>, + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <2>; + num-lanes = <4>; + + interrupts = , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_2A_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2A_GDSC>; + + phys = <&pcie2a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2a_phy: phy@1c24000 { + compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; + reg = <0x0 0x01c24000 0x0 0x2000>, + <0x0 0x01c26000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, + <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_2A_PIPE_CLK>, + <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_2A_GDSC>; + + resets = <&gcc GCC_PCIE_2A_PHY_BCR>; + reset-names = "phy"; + + qcom,4ln-config-sel = <&tcsr 0xa044 0>; + + #clock-cells = <0>; + clock-output-names = "pcie_2a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1000>; + + clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_card_hc: ufs@1da4000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01da4000 0 0x3000>; + interrupts = ; + phys = <&ufs_card_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_CARD_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_CARD_GDSC>; + + iommus = <&apps_smmu 0x4a0 0x0>; + dma-coherent; + + clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, + <&gcc GCC_UFS_CARD_AHB_CLK>, + <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_card_phy: phy@1da7000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01da7000 0 0x1000>; + + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + power-domains = <&gcc UFS_CARD_GDSC>; + + resets = <&ufs_card_hc 0>; + reset-names = "ufsphy"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fc0000 { + compatible = "qcom,sc8280xp-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-690.0", "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = ; + iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>; + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + opp-level = ; + opp-peak-kBps = <451000>; + }; + + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + opp-level = ; + opp-peak-kBps = <1555000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = ; + opp-peak-kBps = <1555000>; + }; + + opp-547000000 { + opp-hz = /bits/ 64 <547000000>; + opp-level = ; + opp-peak-kBps = <1555000>; + }; + + opp-606000000 { + opp-hz = /bits/ 64 <606000000>; + opp-level = ; + opp-peak-kBps = <2736000>; + }; + + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-level = ; + opp-peak-kBps = <2736000>; + }; + + opp-655000000 { + opp-hz = /bits/ 64 <655000000>; + opp-level = ; + opp-peak-kBps = <2736000>; + }; + + opp-690000000 { + opp-hz = /bits/ 64 <690000000>; + opp-level = ; + opp-peak-kBps = <2736000>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x03de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&gpu_smmu 5 0xc00>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc8280xp-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + + power-domains = <&rpmhpd SC8280XP_GFX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpu_smmu: iommu@3da0000 { + compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + usb_0_hsphy: phy@88e5000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e5000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy0: phy@88e7000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x400>; + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy1: phy@88e8000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e8000 0 0x400>; + clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy2: phy@88e9000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e9000 0 0x400>; + clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy3: phy@88ea000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088ea000 0 0x400>; + clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_qmpphy0: phy@88ef000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088ef000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&gcc GCC_USB3_MP0_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_MP_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb2_phy0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_qmpphy1: phy@88f1000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088f1000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&gcc GCC_USB3_MP1_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_MP_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb2_phy1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sc8280xp-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_LCX>, + <&rpmhpd SC8280XP_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = ; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = ; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + rxmacro: rxmacro@3200000 { + compatible = "qcom,sc8280xp-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + clock-output-names = "mclk"; + #clock-cells = <0>; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_default>; + + status = "disabled"; + }; + + swr1: soundwire-controller@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + interrupts = ; + clocks = <&rxmacro>; + clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + txmacro: txmacro@3220000 { + compatible = "qcom,sc8280xp-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_default>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + clock-output-names = "mclk"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + wsamacro: codec@3240000 { + compatible = "qcom,sc8280xp-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_default>; + + status = "disabled"; + }; + + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.6.0"; + interrupts = ; + clocks = <&wsamacro>; + clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; + label = "WSA"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x032a9000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + swr2: soundwire-controller@3330000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03330000 0 0x2000>; + interrupts = , + ; + interrupt-names = "core", "wakeup"; + + clocks = <&txmacro>; + clock-names = "iface"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + label = "TX"; + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x01>; + + status = "disabled"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sc8280xp-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec", "npl"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; + reg = <0 0x33c0000 0x0 0x20000>, + <0 0x3550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + status = "disabled"; + + tx_swr_default: tx-swr-default-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_default: rx-swr-default-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_sleep: dmic02-sleep-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + wsa_swr_default: wsa-swr-default-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_default: wsa2-swr-default-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0 0x033e0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sdc2: mmc@8804000 { + compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4e0 0x0>; + power-domains = <&rpmhpd SC8280XP_CX>; + operating-points-v2 = <&sdc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + }; + + usb_0_qmpphy: phy@88eb000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088eb000 0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB4_EUD_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB4_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_0_qmpphy_dp_in: endpoint {}; + }; + }; + }; + + usb_1_hsphy: phy@8902000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x08902000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@8903000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x08903000 0 0x4000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB4_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint {}; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint {}; + }; + }; + }; + + mdss1_dp0_phy: phy@8909a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x08909a00 0 0x19c>, + <0 0x08909200 0 0xec>, + <0 0x08909600 0 0xec>, + <0 0x08909000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp1_phy: phy@890ca00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0890ca00 0 0x19c>, + <0 0x0890c200 0 0xec>, + <0 0x0890c600 0 0xec>, + <0 0x0890c000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + pmu@9091000 { + compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x09091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <762000>; + }; + opp-1 { + opp-peak-kBps = <1720000>; + }; + opp-2 { + opp-peak-kBps = <2086000>; + }; + opp-3 { + opp-peak-kBps = <2597000>; + }; + opp-4 { + opp-peak-kBps = <2929000>; + }; + opp-5 { + opp-peak-kBps = <3879000>; + }; + opp-6 { + opp-peak-kBps = <5161000>; + }; + opp-7 { + opp-peak-kBps = <5931000>; + }; + opp-8 { + opp-peak-kBps = <6515000>; + }; + opp-9 { + opp-peak-kBps = <7980000>; + }; + opp-10 { + opp-peak-kBps = <8136000>; + }; + opp-11 { + opp-peak-kBps = <10437000>; + }; + opp-12 { + opp-peak-kBps = <12191000>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2288000>; + }; + opp-1 { + opp-peak-kBps = <4577000>; + }; + opp-2 { + opp-peak-kBps = <7110000>; + }; + opp-3 { + opp-peak-kBps = <9155000>; + }; + opp-4 { + opp-peak-kBps = <12298000>; + }; + opp-5 { + opp-peak-kBps = <14236000>; + }; + opp-6 { + opp-peak-kBps = <15258001>; + }; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8280xp-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>, + <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc4_base", "llcc5_base", + "llcc6_base", "llcc7_base", "llcc_broadcast_base"; + interrupts = ; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x820 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_0_role_switch: endpoint { + }; + }; + }; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 136 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x860 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_role_switch: endpoint { + }; + }; + }; + }; + + mdss0: display-subsystem@ae00000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interrupts = ; + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <&apps_smmu 0x1000 0x402>; + power-domains = <&dispcc0 MDSS_GDSC>; + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss0_mdp: display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss0>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss0_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_intf0_out: endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss0_intf4_out: endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss0_intf5_out: endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss0_intf6_out: endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + + mdss0_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss0_dp0: displayport-controller@ae90000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss0>; + interrupts = <12>; + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss0_dp0_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dp0_in: endpoint { + remote-endpoint = <&mdss0_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dp0_out: endpoint { + }; + }; + }; + + mdss0_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp1: displayport-controller@ae98000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae99000 0 0x400>, + <0 0xae99400 0 0x400>; + interrupt-parent = <&mdss0>; + interrupts = <13>; + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss0_dp1_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dp1_in: endpoint { + remote-endpoint = <&mdss0_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dp1_out: endpoint { + }; + }; + }; + + mdss0_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp2: displayport-controller@ae9a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>, + <0 0xae9b400 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <14>; + phys = <&mdss0_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; + operating-points-v2 = <&mdss0_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp2_in: endpoint { + remote-endpoint = <&mdss0_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp3: displayport-controller@aea0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>, + <0 0xaea1400 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <15>; + phys = <&mdss0_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; + operating-points-v2 = <&mdss0_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp3_in: endpoint { + remote-endpoint = <&mdss0_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + mdss0_dp2_phy: phy@aec2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss0_dp3_phy: phy@aec5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc0: clock-controller@af00000 { + compatible = "qcom,sc8280xp-dispcc0"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss0_dp2_phy 0>, + <&mdss0_dp2_phy 1>, + <&mdss0_dp3_phy 0>, + <&mdss0_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 3>, + <69 86 1>, + <70 520 54>, + <124 609 28>, + <159 638 1>, + <160 720 8>, + <168 801 1>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 1>, + <216 646 5>, + <221 390 5>, + <226 700 3>, + <229 240 3>, + <232 269 1>, + <233 377 1>, + <234 372 1>, + <235 138 1>, + <236 857 1>, + <237 860 1>, + <238 137 1>, + <239 668 1>, + <240 366 1>, + <241 949 1>, + <242 815 5>, + <247 769 1>, + <248 768 1>, + <249 663 1>, + <250 799 2>, + <252 798 1>, + <253 765 1>, + <254 763 1>, + <255 454 1>, + <258 139 1>, + <259 786 2>, + <261 370 2>, + <263 158 2>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc8280xp-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 230>; + wakeup-parent = <&pdc>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c26000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8280xp-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8280xp-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + }; + + epss_l3: interconnect@18590000 { + compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3"; + reg = <0 0x18590000 0 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + remoteproc_nsp0: remoteproc@1b300000 { + compatible = "qcom,sc8280xp-nsp0-pas"; + reg = <0 0x1b300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp0_mem>; + + qcom,smem-states = <&smp2p_nsp0_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp0"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x3181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x3182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x3184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x3185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x3186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x3187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x3188 0x0420>; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x318c 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x318d 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x318e 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x318f 0x0420>; + }; + }; + }; + }; + + remoteproc_nsp1: remoteproc@21300000 { + compatible = "qcom,sc8280xp-nsp1-pas"; + reg = <0 0x21300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp1_mem>; + + qcom,smem-states = <&smp2p_nsp1_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp1"; + qcom,remote-pid = <12>; + }; + }; + + mdss1: display-subsystem@22000000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x22000000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + interrupts = ; + + iommus = <&apps_smmu 0x1800 0x402>; + power-domains = <&dispcc1 MDSS_GDSC>; + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss1_mdp: display-controller@22001000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x22001000 0 0x8f000>, + <0 0x220b0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>, + <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss1>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss1_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_intf0_out: endpoint { + remote-endpoint = <&mdss1_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss1_intf4_out: endpoint { + remote-endpoint = <&mdss1_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss1_intf5_out: endpoint { + remote-endpoint = <&mdss1_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss1_intf6_out: endpoint { + remote-endpoint = <&mdss1_dp2_in>; + }; + }; + }; + + mdss1_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss1_dp0: displayport-controller@22090000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22090000 0 0x200>, + <0 0x22090200 0 0x200>, + <0 0x22090400 0 0x600>, + <0 0x22091000 0 0x400>, + <0 0x22091400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <12>; + phys = <&mdss1_dp0_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>; + operating-points-v2 = <&mdss1_dp0_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp0_in: endpoint { + remote-endpoint = <&mdss1_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp1: displayport-controller@22098000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22098000 0 0x200>, + <0 0x22098200 0 0x200>, + <0 0x22098400 0 0x600>, + <0 0x22099000 0 0x400>, + <0 0x22099400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <13>; + phys = <&mdss1_dp1_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>; + operating-points-v2 = <&mdss1_dp1_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp1_in: endpoint { + remote-endpoint = <&mdss1_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp2: displayport-controller@2209a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x2209a000 0 0x200>, + <0 0x2209a200 0 0x200>, + <0 0x2209a400 0 0x600>, + <0 0x2209b000 0 0x400>, + <0 0x2209b400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <14>; + phys = <&mdss1_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>; + operating-points-v2 = <&mdss1_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp2_in: endpoint { + remote-endpoint = <&mdss1_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp3: displayport-controller@220a0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x220a0000 0 0x200>, + <0 0x220a0200 0 0x200>, + <0 0x220a0400 0 0x600>, + <0 0x220a1000 0 0x400>, + <0 0x220a1400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <15>; + phys = <&mdss1_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>; + operating-points-v2 = <&mdss1_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp3_in: endpoint { + remote-endpoint = <&mdss1_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + mdss1_dp2_phy: phy@220c2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c2a00 0 0x19c>, + <0 0x220c2200 0 0xec>, + <0 0x220c2600 0 0xec>, + <0 0x220c2000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp3_phy: phy@220c5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c5a00 0 0x19c>, + <0 0x220c5200 0 0xec>, + <0 0x220c5600 0 0xec>, + <0 0x220c5000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc1: clock-controller@22100000 { + compatible = "qcom,sc8280xp-dispcc1"; + reg = <0 0x22100000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <0>, + <&mdss1_dp0_phy 0>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp1_phy 0>, + <&mdss1_dp1_phy 1>, + <&mdss1_dp2_phy 0>, + <&mdss1_dp2_phy 1>, + <&mdss1_dp3_phy 0>, + <&mdss1_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + + ethernet1: ethernet@23000000 { + compatible = "qcom,sc8280xp-ethqos"; + reg = <0x0 0x23000000 0x0 0x10000>, + <0x0 0x23016000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + + clocks = <&gcc GCC_EMAC1_AXI_CLK>, + <&gcc GCC_EMAC1_SLV_AHB_CLK>, + <&gcc GCC_EMAC1_PTP_CLK>, + <&gcc GCC_EMAC1_RGMII_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "rgmii"; + + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + + iommus = <&apps_smmu 0x40 0xf>; + power-domains = <&gcc EMAC_1_GDSC>; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + }; + + sound: sound { + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; -- cgit v1.2.3