From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts | 238 +++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts (limited to 'arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts') diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts new file mode 100644 index 0000000000..2b7230594e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev2)"; + compatible = "google,cheza-rev2", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; -- cgit v1.2.3