From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 706 +++++++++++++++++++++ 1 file changed, 706 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi (limited to 'arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi') diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi new file mode 100644 index 0000000000..7ee61b2045 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -0,0 +1,706 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include +#include +#include "sdm845.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */ + qcom,board-id = <8 0>; + + aliases { + serial0 = &uart6; + serial1 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + /* SONY was cool and didn't diverge from MTP this time, yay! */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_0p9>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>; + vdd-l3-l11-supply = <&vreg_s7a_0p9>; + vdd-l4-l5-supply = <&vreg_s7a_0p9>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l9-supply = <&vreg_s5a_1p9>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p3>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p3: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_0p9: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p9: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p7: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p7: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-system-load = <62000>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_2p7: ldo19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = ; + + /* + * The driver *really* doesn't want this regualtor to exist, + * saying that it could not get the current voltage (-ENOTRECOVERABLE) + * even though it surely is used on these devices (as a voltage + * source for camera autofocus) + */ + status = "disabled"; + }; + + vreg_l20a_2p7: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p7: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p8: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p0: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p1: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p0: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_2p8: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-system-load = <100000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + src_vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn"; + status = "okay"; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vreg_l14a_1p8>; + /* + * This is a blatant abuse of OF, but the panel driver *needs* + * to probe first, as the power/gpio switching needs to be precisely + * timed in order for both the display and touch panel to function properly. + */ + incell-supply = <&panel>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + pinctrl-0 = <&ts_default>; + pinctrl-1 = <&ts_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1355 @ 8, c */ + /* NXP PN547 NFC @ 28 */ + /* Renesas IDTP9221 Qi charger @ 61 */ +}; + +&i2c14 { + status = "okay"; + clock-frequency = <400000>; + + /* SONY ToF sensor @ 52 */ + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&ibb { + qcom,discharge-resistor-kohms = <300>; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <0>; + regulator-max-microamp = <800000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + +&pm8998_gpios { + focus_n: focus-n-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + vol_down_n: vol-down-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + snapshot_n: snapshot-n-state { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pmi8998_wled { + default-brightness = <800>; + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,enabled-strings = <0 1 2 3>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p7>; + vqmmc-supply = <&vreg_l13a_1p8>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdc2_default_state>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-mmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_sleep: sde-dsi-sleep-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active_sleep: sde-te-active-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_default: ts-default-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ts_sleep: ts-sleep-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&uart6 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; + + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; +}; + +&venus { + firmware-name = "qcom/sdm845/Sony/tama/venus.mbn"; + status = "okay"; +}; -- cgit v1.2.3