From 9f0fc191371843c4fc000a226b0a26b6c059aacd Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sat, 18 May 2024 19:40:19 +0200
Subject: Merging upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 56 ++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)

(limited to 'arch/arm64/boot/dts/qcom/sm8550.dtsi')

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 3a228d4f0c..e15564ed54 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -5,11 +5,13 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,sm8550-camcc.h>
 #include <dt-bindings/clock/qcom,sm8550-gcc.h>
 #include <dt-bindings/clock/qcom,sm8550-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
 #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
@@ -580,7 +582,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
@@ -1064,6 +1066,20 @@
 				status = "disabled";
 			};
 
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c15: i2c@89c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0089c000 0 0x4000>;
@@ -2044,7 +2060,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2090,7 +2106,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2155,7 +2171,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2182,7 +2198,7 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
@@ -2430,6 +2446,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8550-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SM8550_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8550-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3508,6 +3538,22 @@
 				bias-disable;
 			};
 
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio78", "gpio79";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			sdc2_sleep: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";
-- 
cgit v1.2.3