From dc50eab76b709d68175a358d6e23a5a3890764d3 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:39:57 +0200 Subject: Merging upstream version 6.7.7. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/qcom/Makefile | 12 + arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso | 8 + arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 27 +- arch/arm64/boot/dts/qcom/apq8039-t2.dts | 8 + arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 +- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 8 + arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 23 + arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 ++ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 32 +- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 67 +-- arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts | 12 + .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 12 + arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 12 + arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts | 12 + arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 12 + .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 21 +- .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 12 + .../dts/qcom/msm8916-samsung-a2015-common.dtsi | 12 + .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 4 + .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 4 + .../dts/qcom/msm8916-samsung-e2015-common.dtsi | 4 + .../boot/dts/qcom/msm8916-samsung-gt5-common.dtsi | 12 + arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts | 86 +++ arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts | 64 ++ .../boot/dts/qcom/msm8916-samsung-j5-common.dtsi | 51 ++ arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts | 5 + arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts | 15 + .../boot/dts/qcom/msm8916-samsung-serranove.dts | 12 + arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi | 33 +- .../boot/dts/qcom/msm8916-wingtech-wt88047.dts | 12 + arch/arm64/boot/dts/qcom/msm8916.dtsi | 39 +- .../boot/dts/qcom/msm8939-longcheer-l9100.dts | 334 +++++++++++ arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts | 4 + .../dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts | 8 + arch/arm64/boot/dts/qcom/msm8939.dtsi | 37 +- arch/arm64/boot/dts/qcom/msm8976.dtsi | 7 +- arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 1 + .../boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +- .../boot/dts/qcom/msm8996-oneplus-common.dtsi | 2 +- .../arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 4 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 +- arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 2 +- arch/arm64/boot/dts/qcom/msm8998-mtp.dts | 2 +- .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts | 2 +- arch/arm64/boot/dts/qcom/msm8998.dtsi | 65 +- arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 + arch/arm64/boot/dts/qcom/pm7250b.dtsi | 14 +- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 40 ++ arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 + arch/arm64/boot/dts/qcom/pm8350c.dtsi | 6 + arch/arm64/boot/dts/qcom/pm8916.dtsi | 3 - arch/arm64/boot/dts/qcom/pmr735d.dtsi | 104 ---- arch/arm64/boot/dts/qcom/pmr735d_a.dtsi | 59 ++ arch/arm64/boot/dts/qcom/pmr735d_b.dtsi | 59 ++ arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 667 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 51 ++ arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 125 +++- arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 2 + arch/arm64/boot/dts/qcom/sa8775p.dtsi | 8 + .../arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 2 +- .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 3 + .../boot/dts/qcom/sc7180-trogdor-kingoftown.dts | 13 +- .../sc7180-trogdor-lazor-limozeen-nots-r10.dts | 29 + .../qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts | 1 + .../qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts | 7 +- .../dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts | 45 ++ .../dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 2 + .../dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts | 11 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts | 23 + .../boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 27 + .../boot/dts/qcom/sc7180-trogdor-lazor-r10.dts | 19 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 5 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 5 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 5 +- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 1 + .../dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts | 1 + .../dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts | 1 + .../dts/qcom/sc7180-trogdor-pazquel-parade.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi | 13 +- .../arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 2 + .../dts/qcom/sc7180-trogdor-quackingstick.dtsi | 2 + arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi | 38 ++ .../boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi | 38 ++ ...sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts | 17 +- .../qcom/sc7180-trogdor-wormdingler-rev1-boe.dts | 1 + ...sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts | 15 +- .../qcom/sc7180-trogdor-wormdingler-rev1-inx.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 27 - arch/arm64/boot/dts/qcom/sc7180.dtsi | 187 ++++-- arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 4 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 201 ++++--- .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 3 +- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 3 +- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 29 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 68 ++- arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 88 ++- .../arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 2 +- .../dts/qcom/sdm845-sony-xperia-tama-akari.dts | 170 ++++++ .../dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts | 168 ++++++ .../dts/qcom/sdm845-sony-xperia-tama-apollo.dts | 170 ++++++ .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 91 +++ .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 135 ++--- .../arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 2 +- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 2 +- arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts | 2 +- .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 59 ++ .../boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 4 +- arch/arm64/boot/dts/qcom/sm6125.dtsi | 255 +++++++- arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi | 423 +++++++++++++ arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 + arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 35 +- arch/arm64/boot/dts/qcom/sm8150.dtsi | 114 ++-- .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 5 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 578 ++++++++++++++---- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 81 +++ arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 1 + arch/arm64/boot/dts/qcom/sm8350.dtsi | 11 +- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 24 +- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 1 + .../boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 98 ++- arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 7 +- arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 50 +- arch/arm64/boot/dts/qcom/sm8550.dtsi | 56 +- 137 files changed, 4974 insertions(+), 904 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso create mode 100644 arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts delete mode 100644 arch/arm64/boot/dts/qcom/pmr735d.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmr735d_a.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmr735d_b.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi (limited to 'arch/arm64/boot/dts/qcom') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2cca20563a..d6cb840b70 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb + +apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb @@ -41,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb @@ -81,6 +86,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb @@ -112,11 +118,16 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r10.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r10.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb @@ -196,6 +207,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso new file mode 100644 index 0000000000..a82c26b7ea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +/plugin/; + +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index dabe9f42a6..9ffad7d1f2 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -233,6 +233,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &lpass { status = "okay"; }; @@ -241,6 +245,10 @@ status = "okay"; }; +&mba_mem { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -256,10 +264,13 @@ firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; }; +&mpss_mem { + status = "okay"; + reg = <0x0 0x86800000 0x0 0x2b00000>; +}; + &pm8916_codec { status = "okay"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; @@ -367,6 +378,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; firmware-name = "qcom/apq8016/wcnss.mbn"; @@ -380,6 +399,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts index 027d1da7e8..4f82bb6686 100644 --- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -131,6 +131,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &lpass { status = "okay"; }; @@ -391,3 +395,7 @@ &wcnss_iris { compatible = "qcom,wcn3680"; }; + +&wcnss_mem { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 3067a4091a..e8148b3d6c 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -1089,7 +1089,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; }; &ufshc { @@ -1098,6 +1097,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 9f13d2dcdf..38ffdc3cbd 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -57,6 +57,7 @@ firmware { scm { compatible = "qcom,scm-ipq5018", "qcom,scm"; + qcom,sdi-enabled; }; }; @@ -181,6 +182,13 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5018", "qcom,kpss-wdt"; + reg = <0x0b017000 0x40>; + interrupts = ; + clocks = <&sleep_clk>; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts index f96b0c8c90..c224ffc65b 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts @@ -12,6 +12,15 @@ / { model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; + + regulator_fixed_5p0: regulator-s0500 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_5p0"; + }; }; &blsp1_spi0 { @@ -79,3 +88,17 @@ bias-pull-up; }; }; + +&usb { + status = "okay"; +}; + +&usb_dwc { + dr_mode = "host"; +}; + +&usbphy0 { + vdd-supply = <®ulator_fixed_5p0>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index e40c55adff..d3fef2f80a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -145,6 +145,19 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + usbphy0: phy@7b000 { + compatible = "qcom,ipq5332-usb-hsphy"; + reg = <0x0007b000 0x12c>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x721>; @@ -290,6 +303,48 @@ status = "disabled"; }; + usb: usb@8af8800 { + compatible = "qcom,ipq5332-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = ; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SNOC_USB_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB_BCR>; + + qcom,select-utmi-as-pipe-clk; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = ; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index fc907afe51..0b1330b521 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -278,33 +278,25 @@ pcie_phy: phy@84000 { compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ + reg = <0x0 0x00084000 0x0 0x1000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; - - pcie_phy0: phy@84200 { - reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ - <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ - <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ - <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_pcie0_pipe_clk_src"; - #clock-cells = <0>; - }; }; mdio: mdio@90000 { @@ -756,7 +748,7 @@ #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy0>; + phys = <&pcie_phy>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 92fd924bbd..2f275c84e5 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -211,59 +211,48 @@ pcie_qmp0: phy@84000 { compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; - reg = <0x00084000 0x1bc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00084000 0x1000>; clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "pcie20_phy0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + resets = <&gcc GCC_PCIE0_PHY_BCR>, - <&gcc GCC_PCIE0PHY_PHY_BCR>; + <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; - - pcie_phy0: phy@84200 { - reg = <0x84200 0x16c>, - <0x84400 0x200>, - <0x84800 0x1f0>, - <0x84c00 0xf4>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie20_phy0_pipe_clk"; - }; }; pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x0008e000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0008e000 0x1000>; clocks = <&gcc GCC_PCIE1_AUX_CLK>, - <&gcc GCC_PCIE1_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "pcie20_phy1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + resets = <&gcc GCC_PCIE1_PHY_BCR>, - <&gcc GCC_PCIE1PHY_PHY_BCR>; + <&gcc GCC_PCIE1PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; - - pcie_phy1: phy@8e200 { - reg = <0x8e200 0x130>, - <0x8e400 0x200>, - <0x8e800 0x1f8>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_PCIE1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie20_phy1_pipe_clk"; - }; }; mdio: mdio@90000 { @@ -807,7 +796,7 @@ #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy1>; + phys = <&pcie_qmp1>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ @@ -869,7 +858,7 @@ #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy0>; + phys = <&pcie_qmp0>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 84723c9b73..57a74eea10 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -155,6 +155,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -163,6 +171,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 47da738661..aa4c1ab1e6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -192,6 +192,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -200,6 +208,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 92f6954817..a8be6ff668 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -160,6 +160,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -168,6 +176,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index 4aeeee24ce..b748d140b5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -150,6 +150,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -158,6 +166,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 484e488a5e..bf7fc89dd1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -328,6 +328,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -336,6 +344,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_irq_default: accel-irq-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 4efc534b1d..aad4a2e5e6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -23,9 +23,14 @@ stdout-path = "serial0"; }; + /* + * For some reason, the signed wcnss firmware is not relocatable. + * It must be loaded at 0x8b600000. All other firmware is relocatable, + * so place wcnss at the fixed address and then all other firmware + * regions will be automatically allocated at a fitting place. + */ reserved-memory { - /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */ - /delete-node/ wcnss@89300000; + /delete-node/ wcnss; wcnss_mem: wcnss@8b600000 { reg = <0x0 0x8b600000 0x0 0x600000>; @@ -260,6 +265,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -268,6 +281,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio116"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index d73294af1a..41cadb906b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -146,6 +146,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -154,6 +162,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 019bf73178..0b29132b74 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -284,6 +288,14 @@ extcon = <&muic>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index e5a569698c..f5a8083695 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -120,6 +120,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 388482a1e3..391befa22b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -71,6 +71,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 6f65fd4b3e..0824ab041d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -83,6 +83,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 54d648972d..c19cf20d74 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -158,6 +158,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -166,6 +174,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 48111c6a2c..75c4854ecd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -19,6 +19,19 @@ pinctrl-names = "default"; }; + reg_lcd_vmipi: regulator-lcd-vmipi { + compatible = "regulator-fixed"; + regulator-name = "lcd_vmipi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&lcd_en_default>; + pinctrl-names = "default"; + }; + reg_motor_vdd: regulator-motor-vdd { compatible = "regulator-fixed"; regulator-name = "motor_vdd"; @@ -55,6 +68,19 @@ enable-active-high; }; + reg_vlcd_5p4v: regulator-vlcd-5p4v { + compatible = "regulator-fixed"; + regulator-name = "vlcd_5p4v"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&buckbooster_en_default>; + pinctrl-names = "default"; + }; + vibrator { compatible = "pwm-vibrator"; @@ -81,10 +107,49 @@ pinctrl-0 = <&tsp_int_rst_default>; pinctrl-names = "default"; + + linux,keycodes = ; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + pinctrl-names = "default", "sleep"; + + panel@0 { + compatible = "samsung,ltl101at01", "samsung,s6d7aa0"; + reg = <0>; + + power-supply = <®_vlcd_5p4v>; + vmipi-supply = <®_lcd_vmipi>; + reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; }; }; +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + &tlmm { + buckbooster_en_default: buckbooster-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + motor_en_default: motor-en-default-state { pins = "gpio76"; function = "gpio"; @@ -97,6 +162,27 @@ function = "gcc_gp2_clk_a"; }; + lcd_en_default: lcd-en-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdss_default: mdss-default-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_sleep: mdss-sleep-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + tsp_en_default: tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 98ceaad7fc..11359bcc27 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -9,6 +9,19 @@ compatible = "samsung,gt58", "qcom,msm8916"; chassis-type = "tablet"; + reg_5p4v: regulator-5p4v { + compatible = "regulator-fixed"; + regulator-name = "vlcd_5p4v"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&buckbooster_en_default>; + pinctrl-names = "default"; + }; + reg_vdd_tsp: regulator-vdd-tsp { compatible = "regulator-fixed"; regulator-name = "vdd_tsp"; @@ -51,7 +64,58 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + pinctrl-names = "default", "sleep"; + + panel@0 { + compatible = "samsung,lsl080al03", "samsung,s6d7aa0"; + reg = <0>; + + power-supply = <®_5p4v>; + vmipi-supply = <&pm8916_l5>; + reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + &tlmm { + buckbooster_en_default: buckbooster-en-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdss_default: mdss-default-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_sleep: mdss-sleep-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index cb0e4a7faf..fe59be3505 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -84,6 +84,31 @@ pinctrl-0 = <&muic_int_default>; }; }; + + i2c_sensors: i2c-sensors { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 31 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 32 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&sensors_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + accelerometer: accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + st,drdy-int-pin = <1>; + }; + }; }; &blsp_i2c5 { @@ -138,6 +163,14 @@ extcon = <&muic>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -146,7 +179,18 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -187,6 +231,13 @@ bias-disable; }; + sensors_i2c_default: sensors-i2c-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tsp_int_default: tsp-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 3e1ff5b4d2..58c2f5a70e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -10,6 +10,11 @@ chassis-type = "handset"; }; +&accelerometer { + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; +}; + &blsp_i2c5 { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts index b2fe109723..8b404a9cd6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts @@ -23,6 +23,17 @@ }; }; +&accelerometer { + interrupts-extended = <&tlmm 49 IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&pm8916_l6>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; +}; + &muic { interrupts = <121 IRQ_TYPE_EDGE_FALLING>; }; @@ -40,6 +51,10 @@ }; }; +&accel_int_default { + pins = "gpio49"; +}; + &muic_int_default { pins = "gpio121"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index eaf8773789..68da2a2d30 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -359,6 +359,14 @@ extcon = <&muic>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -367,6 +375,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { fg_alert_default: fg-alert-default-state { pins = "gpio121"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 004a129a2e..c77ed04bb6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -17,18 +17,6 @@ stdout-path = "serial0"; }; - reserved-memory { - mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x5500000>; - no-map; - }; - - gps_mem: gps@8bd00000 { - reg = <0x0 0x8bd00000 0x0 0x200000>; - no-map; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -92,10 +80,19 @@ clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; }; +&mba_mem { + status = "okay"; +}; + &mpss { status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; + status = "okay"; +}; + &pm8916_usbin { status = "okay"; }; @@ -115,6 +112,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -123,6 +128,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { /* pins are board-specific */ button_default: button-default-state { diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 43078b890d..241c3a73c8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -190,6 +190,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -198,6 +206,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 961ceb83a9..057c1a0b7a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -74,23 +74,43 @@ }; mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x2b00000>; + /* + * The memory region for the mpss firmware is generally + * relocatable and could be allocated dynamically. + * However, many firmware versions tend to fail when + * loaded to some special addresses, so it is hard to + * define reliable alloc-ranges. + * + * alignment = <0x0 0x400000>; + * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + */ + reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ no-map; + status = "disabled"; }; - wcnss_mem: wcnss@89300000 { - reg = <0x0 0x89300000 0x0 0x600000>; + wcnss_mem: wcnss { + size = <0x0 0x600000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - venus_mem: venus@89900000 { - reg = <0x0 0x89900000 0x0 0x600000>; + venus_mem: venus { + size = <0x0 0x500000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - mba_mem: mba@8ea00000 { + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; - reg = <0 0x8ea00000 0 0x100000>; + status = "disabled"; }; }; @@ -1750,7 +1770,7 @@ }; }; - gpu@1c00000 { + gpu: gpu@1c00000 { compatible = "qcom,adreno-306.0", "qcom,adreno"; reg = <0x01c00000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; @@ -1773,6 +1793,7 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&gpu_opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + status = "disabled"; gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1797,7 +1818,7 @@ clock-names = "core", "iface", "bus"; iommus = <&apps_iommu 5>; memory-region = <&venus_mem>; - status = "okay"; + status = "disabled"; video-decoder { compatible = "venus-decoder"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts new file mode 100644 index 0000000000..6802714fda --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" + +#include +#include +#include +#include +#include + +/ { + model = "BQ Aquaris M5 (Longcheer L9100)"; + compatible = "longcheer,l9100", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-0 = <&button_backlight_default>; + pinctrl-names = "default"; + }; + }; + + reg_ts_vdd: regulator-vdd-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vdd-ts"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&ts_vdd_default>; + pinctrl-names = "default"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&lcd_bl_en_default>; + pinctrl-names = "default"; + }; + + flash-led-controller { + compatible = "ocs,ocp8110"; + flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default &usb_id_switch_default>; + pinctrl-names = "default"; + }; + +}; + +&blsp_i2c3 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak09911"; + reg = <0x0d>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&mag_reset_default>; + pinctrl-names = "default"; + }; + + light-sensor@23 { + compatible = "liteon,ltr559"; + reg = <0x23>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&light_int_default>; + pinctrl-names = "default"; + }; + + imu@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + vdda-supply = <&pm8916_l6>; + vdd-supply = <®_ts_vdd>; + + pinctrl-0 = <&ts_int_reset_default>; + pinctrl-names = "default"; + + /* Keys listed from right to left */ + linux,keycodes = ; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_mpps { + pwm_out: mpp4-state { + pins = "mpp4"; + function = "digital"; + power-source = ; + output-low; + qcom,dtest = <1>; + }; +}; + +&pm8916_pwm { + pinctrl-0 = <&pwm_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pm8916_resin { + linux,code = ; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&tlmm { + button_backlight_default: button-backlight-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio8", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + lcd_bl_en_default: lcd-bl-en-default-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + light_int_default: light-int-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_reset_default: ts-int-reset-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_vdd_default: ts-vdd-default-state { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + usb_id_switch_default: usb-id-switch-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index ba652909d1..fccd8fec8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -352,6 +352,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts index 89b6aebba4..eeb4d578c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -39,6 +39,10 @@ }; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -87,3 +91,7 @@ &wcnss_iris { compatible = "qcom,wcn3660"; }; + +&wcnss_mem { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 3fd64cafe9..f9b6122e65 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -346,23 +346,43 @@ }; mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x5500000>; + /* + * The memory region for the mpss firmware is generally + * relocatable and could be allocated dynamically. + * However, many firmware versions tend to fail when + * loaded to some special addresses, so it is hard to + * define reliable alloc-ranges. + * + * alignment = <0x0 0x400000>; + * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + */ + reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ no-map; + status = "disabled"; }; - wcnss_mem: wcnss@8bd00000 { - reg = <0x0 0x8bd00000 0x0 0x600000>; + wcnss_mem: wcnss { + size = <0x0 0x600000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - venus_mem: venus@8c300000 { - reg = <0x0 0x8c300000 0x0 0x800000>; + venus_mem: venus { + size = <0x0 0x500000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - mba_mem: mba@8cb00000 { - reg = <0x0 0x8cb00000 0x0 0x100000>; + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; }; @@ -1395,7 +1415,7 @@ }; }; - gpu@1c00000 { + gpu: gpu@1c00000 { compatible = "qcom,adreno-405.0", "qcom,adreno"; reg = <0x01c00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -1418,6 +1438,7 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + status = "disabled"; opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 4c5be22b47..d2bb1ada36 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -338,7 +338,12 @@ }; lpass_mem: lpass@8c200000 { - reg = <0x0 0x8c200000 0x0 0x1800000>; + reg = <0x0 0x8c200000 0x0 0x1000000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8d200000 { + reg = <0x0 0x8d200000 0x0 0x800000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 5fe5de9cee..133f9c2540 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -15,6 +15,7 @@ /delete-node/ &audio_mem; /delete-node/ &mpss_mem; /delete-node/ &peripheral_region; +/delete-node/ &res_hyp_mem; /delete-node/ &rmtfs_mem; / { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 2861bcdf87..cbc84459a5 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -23,6 +23,7 @@ /delete-node/ &mba_mem; /delete-node/ &mpss_mem; /delete-node/ &peripheral_region; +/delete-node/ &res_hyp_mem; /delete-node/ &rmtfs_mem; /delete-node/ &smem_mem; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index c326257152..8295bf1b21 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -281,7 +281,7 @@ no-map; }; - reserved@6c00000 { + res_hyp_mem: reserved@6c00000 { reg = <0 0x06c00000 0 0x400000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index ec5457508f..38035e0db8 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -772,7 +772,6 @@ &ufsphy { vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; status = "okay"; }; @@ -781,6 +780,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 06f8ff6241..5ab583be9e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -115,7 +115,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; /delete-node/ mba@91500000; @@ -417,6 +417,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; @@ -428,7 +429,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c8e0986425..fa8ec92ce4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -443,6 +444,19 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm_out_funnel_in2: endpoint { + remote-endpoint = + <&funnel_in2_in_modem_etm>; + }; + }; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -538,7 +552,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; mpss_mem: mpss@88800000 { @@ -2643,6 +2657,14 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + in-ports { + port { + funnel_in2_in_modem_etm: endpoint { + remote-endpoint = + <&modem_etm_out_funnel_in2>; + }; + }; + }; out-ports { port { diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index b6a214bea7..f1ceaedd95 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -671,6 +671,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -680,7 +681,6 @@ status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index 4319f4da89..7c77612fb9 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -412,6 +412,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -421,7 +422,6 @@ status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 68e634f821..e6a69d942a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -534,6 +534,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -544,7 +545,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 437b30cc8b..0cac06f25a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -667,6 +667,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -676,7 +677,6 @@ &ufsphy { vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index f180047cac..ebc5ba1b36 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include @@ -56,7 +57,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; spss_mem: memory@8ab00000 { @@ -945,7 +946,7 @@ #address-cells = <3>; #size-cells = <2>; num-lanes = <1>; - phys = <&pciephy>; + phys = <&pcie_phy>; phy-names = "pciephy"; status = "disabled"; @@ -975,32 +976,28 @@ pcie_phy: phy@1c06000 { compatible = "qcom,msm8998-qmp-pcie-phy"; - reg = <0x01c06000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x01c06000 0x1000>; status = "disabled"; - ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_PCIE_CLKREF_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy", "common"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - - pciephy: phy@1c06800 { - reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk_src"; - #clock-cells = <0>; - }; }; ufshc: ufshc@1da4000 { @@ -2034,9 +2031,11 @@ cpu = <&CPU4>; - port { - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; }; }; }; @@ -2051,9 +2050,11 @@ cpu = <&CPU5>; - port { - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; }; }; }; @@ -2068,9 +2069,11 @@ cpu = <&CPU6>; - port { - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; }; }; }; @@ -2085,9 +2088,11 @@ cpu = <&CPU7>; - port { - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 7d4d1f2767..ddbaf7280b 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -53,6 +53,14 @@ bias-pull-up; linux,code = ; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 { @@ -88,6 +96,14 @@ status = "disabled"; }; + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index e8540c36bd..df0afe82f2 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -39,16 +39,16 @@ }; &spmi_bus { - pmic@2 { + pmic@PM7250B_SID { compatible = "qcom,pm7250b", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; + reg = ; #address-cells = <1>; #size-cells = <0>; pm7250b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; - interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts = ; io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; io-channel-names = "thermal"; #thermal-sensor-cells = <0>; @@ -60,7 +60,7 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = ; channel@0 { reg = ; @@ -141,7 +141,7 @@ pm7250b_adc_tm: adc-tm@3500 { compatible = "qcom,spmi-adc-tm5"; reg = <0x3500>; - interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = ; #thermal-sensor-cells = <1>; #address-cells = <1>; #size-cells = <0>; @@ -159,9 +159,9 @@ }; }; - pmic@3 { + pmic@PM7250B_SID1 { compatible = "qcom,pm7250b", "qcom,spmi-pmic"; - reg = <0x3 SPMI_USID>; + reg = ; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 2b9123df58..1aee3270ce 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -59,6 +59,46 @@ reg = <0x1100>; }; + pm8150b_typec: typec@1500 { + compatible = "qcom,pm8150b-typec"; + status = "disabled"; + reg = <0x1500>, + <0x1700>; + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + vdd-vbus-supply = <&pm8150b_vbus>; + }; + pm8150b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index b1686e5777..ac08a09c64 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -132,5 +132,15 @@ status = "disabled"; }; + pm8150l_wled: leds@d800 { + compatible = "qcom,pm8150l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index f28e71487d..aa74e21fe0 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -30,6 +30,12 @@ #interrupt-cells = <2>; }; + pm8350c_flash: led-controller@ee00 { + compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + pm8350c_pwm: pwm { compatible = "qcom,pm8350c-pwm"; #pwm-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 223442f909..f4de867877 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -142,9 +142,6 @@ pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi deleted file mode 100644 index 41fb664a10..0000000000 --- a/arch/arm64/boot/dts/qcom/pmr735d.dtsi +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2022, Linaro Limited - */ - -#include -#include - -/ { - thermal-zones { - pmr735d-k-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - - thermal-sensors = <&pmr735d_k_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pmr735d-l-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - - thermal-sensors = <&pmr735d_l_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - }; -}; - - -&spmi_bus { - pmr735d_k: pmic@a { - compatible = "qcom,pmr735d", "qcom,spmi-pmic"; - reg = <0xa SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmr735d_k_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmr735d_k_gpios: gpio@8800 { - compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmr735d_k_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmr735d_l: pmic@b { - compatible = "qcom,pmr735d", "qcom,spmi-pmic"; - reg = <0xb SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmr735d_l_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmr735d_l_gpios: gpio@8800 { - compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmr735d_l_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi new file mode 100644 index 0000000000..37daaefe34 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pmr735d-k-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_k_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pmr735d_k: pmic@a { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_k_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_k_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_k_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi new file mode 100644 index 0000000000..3b470f6ac4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include + +/ { + thermal-zones { + pmr735d-l-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_l_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pmr735d_l: pmic@b { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_l_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_l_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_l_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts new file mode 100644 index 0000000000..2de0b8c26c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include +#include +#include +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/delete-node/ &rmtfs_mem; + +/ { + model = "Fairphone 5"; + compatible = "fairphone,fp5", "qcom,qcm6490"; + chassis-type = "handset"; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xe1000000 0x0 (2700 * 1224 * 4)>; + width = <1224>; + height = <2700>; + stride = <(1224 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_down_default>, <&hall_sensor_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + /* Powered by the always-on vreg_l8c */ + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 155 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + cont_splash_mem: cont-splash@e1000000 { + reg = <0x0 0xe1000000 0x0 0x2300000>; + no-map; + }; + + adsp_mem: adsp@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: wpss@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + rmtfs_mem: memory@f8500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8500000 0x0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = , ; + }; + }; + + ois_avdd0_1p8: regulator-ois-avdd0-1p8 { + compatible = "regulator-fixed"; + regulator-name = "OIS_AVDD0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; + + ois_dvdd_1p1: regulator-ois-dvdd-1p1 { + compatible = "regulator-fixed"; + regulator-name = "OIS_DVDD_1P1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_s8b>; + }; + + afvdd_2p8: regulator-afvdd-2p8 { + compatible = "regulator-fixed"; + regulator-name = "AFVDD_2P8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = ; + }; + + vreg_l1b: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = ; + }; + + vreg_l2b: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l3b: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = ; + }; + + vreg_l6b: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + }; + + vreg_l7b: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8b: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = ; + }; + + vreg_l9b: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l11b: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l12b: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l13b: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l14b: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l15b: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = ; + }; + + vreg_l16b: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + }; + + vreg_l17b: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = ; + }; + + vreg_l18b: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l19b: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + regulator-initial-mode = ; + }; + + vreg_s9c: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = ; + }; + + vreg_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l2c: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = ; + }; + + vreg_l3c: ldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_l4c: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l5c: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l6c: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l7c: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8c: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + /* Hall sensor VDD */ + regulator-always-on; + }; + + vreg_l9c: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l10c: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + }; + + vreg_l11c: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l12c: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&dispcc { + /* Disable for now so simple-framebuffer continues working */ + status = "disabled"; +}; + +&gcc { + protected-clocks = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* PM8008 PMIC @ 8 and 9 */ + /* Pixelworks @ 26 */ + /* FSA4480 USB audio switch @ 42 */ + /* AW86927FCR haptics @ 5a */ +}; + +&i2c2 { + status = "okay"; + + /* AW88261FCR amplifier @ 34 */ + /* AW88261FCR amplifier @ 35 */ +}; + +&i2c4 { + status = "okay"; + + /* PTN36502 USB redriver @ 1a */ +}; + +&i2c9 { + status = "okay"; + + /* ST21NFC NFC @ 28 */ + /* VL53L3 ToF @ 29 */ +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt"; + status = "okay"; +}; + +&pm7325_gpios { + volume_down_default: volume-down-default-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350c_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdc2_clk { + drive-strength = <16>; + bias-disable; +}; + +&sdc2_cmd { + drive-strength = <10>; + bias-pull-up; +}; + +&sdc2_data { + drive-strength = <10>; + bias-pull-up; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; + + status = "okay"; +}; + +&spi13 { + status = "okay"; + + /* Goodix touchscreen @ 0 */ +}; + +&tlmm { + /* + * 32-33: SMB1394 (SPMI) + * 56-59: fingerprint reader (SPI) + */ + gpio-reserved-ranges = <32 2>, <56 4>; + + bluetooth_enable_default: bluetooth-enable-default-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + hall_sensor_default: hall-sensor-default-state { + pins = "gpio155"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + + pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_l19b>; + vddaon-supply = <&vreg_s7b>; + vddbtcxmx-supply = <&vreg_s7b>; + vddrfacmn-supply = <&vreg_s7b>; + vddrfa0p8-supply = <&vreg_s7b>; + vddrfa1p7-supply = <&vreg_s1b>; + vddrfa1p2-supply = <&vreg_s8b>; + vddrfa2p2-supply = <&vreg_s1c>; + vddasd-supply = <&vreg_l11c>; + + max-speed = <3200000>; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l2b>; + + qcom,hs-crossover-voltage-microvolt = <28000>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + qcom,hs-rise-fall-time-bp = <5430>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <2430>; + + qcom,pre-emphasis-amplitude-bp = <20000>; + qcom,pre-emphasis-duration-bp = <20000>; + + qcom,squelch-detector-bp = <(-2090)>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l1b>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 37abb83ea4..fd38a6278f 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include #include "qcm2290.dtsi" #include "pm2250.dtsi" @@ -39,6 +40,38 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-user0 { + label = "green:user0"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { compatible = "regulator-fixed"; regulator-name = "VREG_HDMI_OUT_1P2"; @@ -134,6 +167,16 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcm2290/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm2290/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm2250-regulators"; @@ -383,6 +426,14 @@ status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm2250_l7>; + vdd-1.8-xo-supply = <&pm2250_l13>; + vdd-1.3-rfa-supply = <&pm2250_l10>; + vdd-3.3-ch0-supply = <&pm2250_l22>; + status = "okay"; +}; + &xo_board { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index e95a004c33..4501c00d12 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -609,12 +610,61 @@ /* LS-I2C1 */ &i2c15 { status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_s4a_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_usb_con_ss: endpoint { + remote-endpoint = <&pm8150b_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_phy_con_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@2 { + reg = <2>; + + redriver_usb_con_sbu: endpoint { + remote-endpoint = <&pm8150b_typec_sbu_out>; + }; + }; + }; + }; }; &mdss { status = "okay"; }; +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + &mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l9a_1p2>; @@ -1273,7 +1323,12 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_role_switch_out { + remote-endpoint = <&pm8150b_role_switch_in>; }; &usb_1_hsphy { @@ -1289,6 +1344,11 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; + orientation-switch; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&redriver_phy_con_ss>; }; &usb_2 { @@ -1339,3 +1399,66 @@ drive-strength = <6>; bias-disable; }; + +&pm8150b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + status = "okay"; +}; + +&pm8150b_typec { + status = "okay"; + + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = ; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_role_switch_out>; + }; + }; + + port@1 { + reg = <1>; + pm8150b_typec_mux_in: endpoint { + remote-endpoint = <&redriver_usb_con_ss>; + }; + }; + + port@2 { + reg = <2>; + + pm8150b_typec_sbu_out: endpoint { + remote-endpoint = <&redriver_usb_con_sbu>; + }; + }; + }; + }; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 81a7eeb9cf..9760bb4b46 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -285,6 +285,7 @@ compatible = "ethernet-phy-id0141.0dd4"; reg = <0x8>; device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; reset-assert-us = <11000>; reset-deassert-us = <70000>; @@ -294,6 +295,7 @@ compatible = "ethernet-phy-id0141.0dd4"; reg = <0xa>; device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; reset-assert-us = <11000>; reset-deassert-us = <70000>; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index d4ca92b98c..1274dcda22 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -1525,6 +1525,7 @@ <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; status = "disabled"; }; @@ -1546,6 +1547,13 @@ status = "disabled"; }; + ice: crypto@1d88000 { + compatible = "qcom,sa8775p-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + usb_0_hsphy: phy@88e4000 { compatible = "qcom,sa8775p-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a532cc4aac..7765c8f649 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -10,7 +10,6 @@ /* Deleted nodes from sc7180-trogdor.dtsi */ -/delete-node/ &alc5682; /delete-node/ &pp3300_codec; / { @@ -104,6 +103,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_ts>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index b27dcd2ec8..2ba3bbf3b9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -7,6 +7,8 @@ /* This file must be included after sc7180-trogdor.dtsi */ +#include "sc7180-trogdor-rt5682i-sku.dtsi" + / { /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -116,6 +118,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_touch>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index 36326ef972..d6db7d83ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -11,19 +11,13 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" / { model = "Google Kingoftown"; compatible = "google,kingoftown", "qcom,sc7180"; }; -&alc5682 { - compatible = "realtek,rt5682s"; - /delete-property/ VBAT-supply; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; -}; - &ap_tp_i2c { status = "okay"; }; @@ -84,11 +78,6 @@ ap_ts_pen_1v8: &i2c4 { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; -}; - &wifi { qcom,ath10k-calibration-variant = "GO_KINGOFTOWN"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts new file mode 100644 index 0000000000..eba15535e1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev10+)"; + compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180"; +}; + +/delete-node/ &ap_ts; + +&panel { + compatible = "edp-panel"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index 7f01573b55..e7da0d6e8e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts index 913b5fc3ba..a609a26515 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -11,13 +11,14 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { - model = "Google Lazor Limozeen without Touchscreen (rev9+)"; - compatible = "google,lazor-sku6", "qcom,sc7180"; + model = "Google Lazor Limozeen without Touchscreen (rev9)"; + compatible = "google,lazor-rev9-sku6", "google,lazor-rev9-sku18", "qcom,sc7180"; }; -/delete-node/&ap_ts; +/delete-node/ &ap_ts; &panel { compatible = "edp-panel"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts new file mode 100644 index 0000000000..5cc7c0d8e7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor Limozeen (rev10+)"; + compatible = "google,lazor-sku4", "google,lazor-sku15", "qcom,sc7180"; +}; + +/delete-node/ &ap_ts; + +&ap_ts_pen_1v8 { + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + pinctrl-names = "default"; + + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&tlmm>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts index d42dcd4211..8a24812b9a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -11,6 +11,8 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" + / { model = "Google Lazor Limozeen (rev4 - rev8)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts index 15d77dc5f9..dd377209de 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -11,23 +11,24 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { - model = "Google Lazor Limozeen (rev9+)"; - compatible = "google,lazor-sku4", "qcom,sc7180"; + model = "Google Lazor Limozeen (rev9)"; + compatible = "google,lazor-rev9-sku4", "google,lazor-rev9-sku15", "qcom,sc7180"; }; -/delete-node/&ap_ts; +/delete-node/ &ap_ts; &ap_ts_pen_1v8 { ap_ts: touchscreen@10 { compatible = "elan,ekth3500"; reg = <0x10>; - pinctrl-names = "default"; pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + pinctrl-names = "default"; - interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&tlmm>; vcc33-supply = <&pp3300_ts>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index 80c7108bc5..b60060a384 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Lazor (rev1 - 2)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts new file mode 100644 index 0000000000..45d34718a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor (rev10+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts new file mode 100644 index 0000000000..79028d0dd1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor (rev10+) with LTE"; + compatible = "google,lazor-sku0", "google,lazor-sku10", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts new file mode 100644 index 0000000000..045827341e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor (rev10+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts index 6ff81c1f7c..3459b81c56 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index e58e36e359..ff8f47da10 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Lazor (rev3 - 8) with LTE"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts index 76c83f88cb..dd8f6d9565 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts index 960f7b7ce0..faf5279729 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -10,11 +10,12 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { - model = "Google Lazor (rev9+) with KB Backlight"; - compatible = "google,lazor-sku2", "qcom,sc7180"; + model = "Google Lazor (rev9) with KB Backlight"; + compatible = "google,lazor-rev9-sku2", "qcom,sc7180"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts index 38027f13b9..d737fd0637 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -11,10 +11,11 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { - model = "Google Lazor (rev9+) with LTE"; - compatible = "google,lazor-sku0", "qcom,sc7180"; + model = "Google Lazor (rev9) with LTE"; + compatible = "google,lazor-rev9-sku0", "google,lazor-rev9-sku10", "qcom,sc7180"; }; &ap_sar_sensor_i2c { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts index 56dd222650..8daad32ff5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts @@ -10,9 +10,10 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { - model = "Google Lazor (rev9+)"; - compatible = "google,lazor", "qcom,sc7180"; + model = "Google Lazor (rev9)"; + compatible = "google,lazor-rev9", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 13339b723a..e9f213d277 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -43,6 +43,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts index 767cb7450c..1c3d9f1381 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-pazquel.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (Parade,LTE)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts index 9145b74e90..bf170471b0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-pazquel.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (TI,LTE)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts index 9a0e6632a7..60ae129b83 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (Parade)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts index 47c5970d8c..31678a98ce 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (TI)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index 273e2249f0..89034b6702 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -7,13 +7,7 @@ /* This file must be included after sc7180-trogdor.dtsi */ #include "sc7180-trogdor-pazquel.dtsi" - -&alc5682 { - compatible = "realtek,rt5682s"; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; - /delete-property/ VBAT-supply; -}; +#include "sc7180-trogdor-rt5682s-sku.dtsi" ap_ts_pen_1v8: &i2c4 { clock-frequency = <400000>; @@ -64,11 +58,6 @@ ap_ts_pen_1v8: &i2c4 { >; }; -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; -}; - &wifi { qcom,ath10k-calibration-variant = "GO_PAZQUEL360"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index fd944842dd..0be62331f9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -8,6 +8,7 @@ #include "sc7180-trogdor.dtsi" /* Must come after sc7180-trogdor.dtsi to modify cros_ec */ #include +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { @@ -102,6 +103,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 62ab6427dd..5f06842c68 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" /* This board only has 1 USB Type-C port. */ /delete-node/ &usb_c1; @@ -69,6 +70,7 @@ interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 671b3691f1..c9667751a9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" /* Must come after sc7180-trogdor.dtsi to modify cros_ec */ #include +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi new file mode 100644 index 0000000000..26f2f5de48 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for SKUs with rt5682i + * + * Copyright 2023 Google LLC. + */ + +&hp_i2c { + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + VBAT-supply = <&pp3300_audio>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&sound { + model = "sc7180-rt5682-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi new file mode 100644 index 0000000000..ea036a73f8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for SKUs with rt5682s + * + * Copyright 2023 Google LLC. + */ + +&hp_i2c { + alc5682: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; + realtek,jd-src = <1>; + }; +}; + +&sound { + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts index 6225ab8329..116f79c25a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -10,21 +10,20 @@ /dts-v1/; -#include "sc7180-trogdor-wormdingler-rev1-boe.dts" +#include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" / { model = "Google Wormdingler rev1+ (BOE, rt5682s)"; compatible = "google,wormdingler-sku1025", "qcom,sc7180"; }; -&alc5682 { - compatible = "realtek,rt5682s"; - /delete-property/ VBAT-supply; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; +&mdss_dsi0_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-drive-ldo-level = <450>; }; -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; +&panel { + compatible = "boe,tv110c9m-ll3"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts index 6eeead70d3..72627760e2 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Wormdingler rev1+ BOE panel board"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts index b40b068dad..0bf355e08f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -10,21 +10,14 @@ /dts-v1/; -#include "sc7180-trogdor-wormdingler-rev1-inx.dts" +#include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" / { model = "Google Wormdingler rev1+ (INX, rt5682s)"; compatible = "google,wormdingler-sku1", "qcom,sc7180"; }; -&alc5682 { - compatible = "realtek,rt5682s"; - /delete-property/ VBAT-supply; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; -}; - -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; +&panel { + compatible = "innolux,hj110iz-01a"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts index dd34a2297e..4b165b826a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Wormdingler rev1+ INX panel board"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 2f6a340ddd..305ad12724 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -123,6 +123,7 @@ interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + panel = <&panel>; post-power-on-delay-ms = <70>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 5a33e16a8b..46aaeba286 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -372,7 +372,6 @@ sound: sound { compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682-max98357a-1mic"; audio-routing = "Headphone Jack", "HPOL", @@ -747,32 +746,6 @@ ap_tp_i2c: &i2c7 { hp_i2c: &i2c9 { status = "okay"; clock-frequency = <400000>; - - alc5682: codec@1a { - compatible = "realtek,rt5682i"; - reg = <0x1a>; - pinctrl-names = "default"; - pinctrl-0 = <&hp_irq>; - - #sound-dai-cells = <1>; - - interrupt-parent = <&tlmm>; - /* - * This will get ignored because the interrupt type - * is set in rt5682.c. - */ - interrupts = <28 IRQ_TYPE_EDGE_BOTH>; - - AVDD-supply = <&pp1800_alc5682>; - DBVDD-supply = <&pp1800_alc5682>; - LDO1-IN-supply = <&pp1800_alc5682>; - MICVDD-supply = <&pp3300_codec>; - VBAT-supply = <&pp3300_audio>; - - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; - realtek,jd-src = <1>; - }; }; &lpasscc { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f7c528ecb2..5b7ffe2081 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -11,15 +11,19 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include #include #include +#include +#include #include / { @@ -687,7 +691,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; }; @@ -2042,6 +2046,11 @@ pins = "gpio57"; function = "lpass_ext"; }; + + ter_mi2s_active: ter-mi2s-active-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66"; + function = "mi2s_2"; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -2795,49 +2804,28 @@ nvmem-cells = <&qusb2p_hstx_trim>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sc7180-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x3c>, - <0 0x088ea000 0 0x18c>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "cfg_ahb"; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x18>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; pmu@90b6300 { @@ -3001,7 +2989,7 @@ iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; }; @@ -3307,8 +3295,9 @@ "ctrl_link_iface", "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -3365,8 +3354,8 @@ <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "dsi0_phy_pll_out_byteclk", @@ -3776,6 +3765,126 @@ status = "disabled"; }; + remoteproc_adsp: remoteproc@62400000 { + compatible = "qcom,sc7180-adsp-pas"; + reg = <0 0x62400000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7180_LCX>, + <&rpmhpd SC7180_LMX>; + power-domain-names = "lcx", "lmx"; + + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + compatible = "qcom,q6core"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1001 0x0>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0>; + qcom,nsessions = <5>; + }; + }; + }; + }; + lpasscc: clock-controller@62d00000 { compatible = "qcom,sc7180-lpasscorecc"; reg = <0 0x62d00000 0 0x50000>, diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index afae7f46b0..c2cba9d717 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -38,6 +38,10 @@ }; }; +&bluetooth { + vddio-supply = <&vreg_l18b_1p8>; +}; + ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 8e330d2e2e..84de20c88a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -13,11 +13,13 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -156,7 +158,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; }; @@ -170,9 +172,8 @@ reg = <0x0 0x0>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; next-level-cache = <&L2_0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -198,9 +199,8 @@ reg = <0x0 0x100>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -221,9 +221,8 @@ reg = <0x0 0x200>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -244,9 +243,8 @@ reg = <0x0 0x300>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -267,9 +265,8 @@ reg = <0x0 0x400>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -290,9 +287,8 @@ reg = <0x0 0x500>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -313,9 +309,8 @@ reg = <0x0 0x600>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -336,9 +331,8 @@ reg = <0x0 0x700>; clocks = <&cpufreq_hw 2>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu7_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -431,9 +425,11 @@ min-residency-us = <5555>; local-timer-stop; }; + }; + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "cluster-power-down"; arm,psci-suspend-param = <0x40003444>; entry-latency-us = <3263>; @@ -799,6 +795,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; qspi_opp_table: opp-table-qspi { @@ -856,9 +905,9 @@ reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <&pcie1_lane>, + <0>, <&pcie1_phy>, <0>, <0>, <0>, - <&usb_1_ssphy>; + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", @@ -2109,7 +2158,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_lane>, + <&pcie1_phy>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -2143,7 +2192,7 @@ power-domains = <&gcc GCC_PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; pinctrl-names = "default"; @@ -2159,15 +2208,22 @@ pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2176,21 +2232,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e200 { - reg = <0 0x01c0e200 0 0x170>, - <0 0x01c0e400 0 0x200>, - <0 0x01c0ea00 0 0x1f0>, - <0 0x01c0e600 0 0x170>, - <0 0x01c0e800 0 0x200>, - <0 0x01c0ee00 0 0xf4>; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; ipa: ipa@1e40000 { @@ -2504,7 +2545,6 @@ compatible = "qcom,sc7280-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, <0 0x03550000 0x0 0x10000>; - qcom,adsp-bypass-mode; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; @@ -3343,49 +3383,26 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sc7280-qmp-usb3-dp-phy", - "qcom,sm8250-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sc7280-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #phy-cells = <0>; - #clock-cells = <1>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; usb_2: usb@8cf8800 { @@ -3694,7 +3711,7 @@ iommus = <&apps_smmu 0xe0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; }; @@ -3799,8 +3816,8 @@ <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; clock-names = "bi_tcxo", @@ -4136,8 +4153,9 @@ "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -5285,6 +5303,7 @@ , , ; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index abc66613cc..3ea07d094b 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include #include #include #include @@ -130,7 +131,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; wlan_mem: wlan-region@8bc00000 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index ae008c3b0a..a40ef23a2a 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include #include #include #include @@ -135,7 +136,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; wlan_mem: wlan-region@8bc00000 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index f9e929bfa5..b389d49d3e 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2084,7 +2084,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x2500>; interrupts = ; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2123,10 +2123,8 @@ ufs_mem_phy: phy-wrapper@1d87000 { compatible = "qcom,sc8180x-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; clock-names = "ref", @@ -2134,16 +2132,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; ipa_virt: interconnect@1e00000 { @@ -2572,14 +2564,14 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; clock-names = "cfg_noc", "core", "iface", - "mock_utmi", "sleep", + "mock_utmi", "xo"; resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -2623,14 +2615,14 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; clock-names = "cfg_noc", "core", "iface", - "mock_utmi", "sleep", + "mock_utmi", "xo"; resets = <&gcc GCC_USB30_SEC_BCR>; power-domains = <&gcc USB30_SEC_GDSC>; @@ -3273,7 +3265,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@15000000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index ec6003212c..775700f78e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -453,7 +454,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; smem_region: smem-mem@86000000 { @@ -1028,6 +1029,65 @@ }; }; + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,sdm660-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x40>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GPLL0_OUT_MSSCC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "gpll0_mss", + "snoc_axi", + "mnoc_axi", + "qdss", + "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmpd SDM660_VDDCX>, + <&rpmpd SDM660_VDDMX>; + power-domain-names = "cx", "mx"; + + memory-region = <&mba_region>, <&mpss_region>; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + adreno_gpu: gpu@5000000 { compatible = "qcom,adreno-508.0", "qcom,adreno"; @@ -1416,10 +1476,10 @@ clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>, <&gcc GCC_USB20_MASTER_CLK>, - <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_SLEEP_CLK>; + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; clock-names = "cfg_noc", "core", - "mock_utmi", "sleep"; + "sleep", "mock_utmi"; assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_MASTER_CLK>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index f942c5afea..99dafc6716 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -111,7 +111,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; /* rmtfs upper guard */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 1516113391..76bfa78661 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -114,7 +114,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; + firmware-name = "qcom/sdm845/adsp.mbn"; }; &apps_rsc { @@ -415,7 +415,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; + firmware-name = "qcom/sdm845/cdsp.mbn"; }; &gcc { @@ -533,6 +533,38 @@ firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; }; +&pcie0 { + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + &pm8998_adc { channel@4c { reg = ; @@ -609,6 +641,11 @@ }; }; +&pm8998_resin { + linux,code = ; + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; @@ -625,6 +662,52 @@ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; }; +&tlmm { + pcie0_default_state: pcie0-default-state { + clkreq-pins { + pins = "gpio36"; + function = "pci_e0"; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + &uart9 { status = "okay"; }; @@ -718,6 +801,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 122c7128de..b523b5fff7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -90,7 +90,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { no-map; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts index d97b7f1e71..6e65909ab5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -15,3 +15,173 @@ &panel { compatible = "sony,td4353-jdi-tama"; }; + +&pmi8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "", + "NC", + "NC", + "", + "WLC_EN_N", + "NC", + "NC", /* GPIO_10 */ + "RSVD(WLC_EN_N)", + "CAM_IO_EN", + "", + "NC"; +}; + +&tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DISP_RESET_N", + "NC", + "CHAT_CAM_PWR_EN", + "CAM2_RSTN", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "CAM_SOF", + "TOF_INT", + "TOF_RESET_N", + "NC", + "NC", + "NC", + "MAIN_CAM_PWR_EN", + "DVDT_ENABLE", + "DVDT_WRT_DET_AND", + "DVDT_WRT_DET_OR", /* GPIO_30 */ + "WLC_INT_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "CC_DIR", + "NC", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_TRXD", + "USB_AUDIO_EN1", + "SW_SERVICE", /* GPIO_50 */ + "US_EURO_SEL", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "USB_PD_EN", + "NFC_DWLD_EN", + "NFC_IRQ", + "CODEC_RST_N", + "CODEC_SPI_MISO", + "CODEC_SPI_MOSI", + "CODEC_SPI_CLK", + "CODEC_SPI_CS_N", + "NC", + "CODEC_SLIMBUS_CLK", /* GPIO_70 */ + "CODEC_SLIMBUS_DATA0", + "CODEC_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "HW_ID_0", + "HW_ID_1", + "TX_GTR_THRES_IN", + "NC", + "NC", + "CAM1_RSTN", /* GPIO_80 */ + "", + "", + "", + "", + "TS_I2C_SDA", + "TS_I2C_SCL", + "NC", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "RFFE6_CLK", + "RFFE6_DATA", + "TS_RESET_N", + "", /* GPIO_100 */ + "GRFC4", + "DEBUG_GPIO0", + "DEBUG_GPIO1", + "RF_LCD_ID_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NC", + "NC", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT", + "RF_ID_EXTENTION", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "TRAY_DET", + "GRFC3", + "NC", + "UIM2_DETECT_EN", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "GRFC2", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "GRFC1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 5d2052a0ff..82e59e4533 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -44,11 +44,179 @@ /delete-property/ touch-reset-gpios; }; +&pmi8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "", + "NC", + "NC", + "", + "WLC_EN_N", + "NC", + "NC", /* GPIO_10 */ + "NC", + "CAM_IO_EN", + "", + "NC"; +}; + &pmi8998_wled { status = "disabled"; }; &tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DISP_RESET_N", + "SAMD_RSTEN_N", + "CHAT_CAM_PWR_EN", + "CAM2_RSTN", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "MASTER_RST_N", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "CAM_SOF", + "TOF_INT", + "TOF_RESET_N", + "NC", + "NC", + "NC", + "MAIN_CAM_PWR_EN", + "DVDT_ENABLE", + "DVDT_WRT_DET_AND", + "DVDT_WRT_DET_OR", /* GPIO_30 */ + "WLC_INT_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "CC_DIR", + "NC", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "DISP_ERR_FG", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_TRXD", + "USB_AUDIO_EN1", + "SW_SERVICE", /* GPIO_50 */ + "US_EURO_SEL", + "SAMD_BOOTL_PIN", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "SDM_SWD_CLK", + "SDM_SWD_DAT", + "SAMD_RST", /* GPIO_60 */ + "USB_PD_EN", + "NFC_DWLD_EN", + "NFC_IRQ", + "CODEC_RST_N", + "CODEC_SPI_MISO", + "CODEC_SPI_MOSI", + "CODEC_SPI_CLK", + "CODEC_SPI_CS_N", + "NC", + "CODEC_SLIMBUS_CLK", /* GPIO_70 */ + "CODEC_SLIMBUS_DATA0", + "CODEC_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "HW_ID_0", + "HW_ID_1", + "TX_GTR_THRES_IN", + "MODE_SEL2", + "NC", + "CAM1_RSTN", /* GPIO_80 */ + "", + "", + "", + "", + "TS_I2C_SDA", + "TS_I2C_SCL", + "NC", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "RFFE6_CLK", + "RFFE6_DATA", + "TS_RESET_N", + "", /* GPIO_100 */ + "GRFC4", + "DEBUG_GPIO0", + "DEBUG_GPIO1", + "RF_LCD_ID_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NC", + "NC", + "NC", + "NFC_ESE_PWR_REQ", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT", + "RF_ID_EXTENTION", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "TRAY_DET", + "GRFC3", + "NC", + "UIM2_DETECT_EN", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "GRFC2", + "TS_VDDIO_EN", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "GRFC1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; + ts_vddio_en: ts-vddio-en-state { pins = "gpio133"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts index cd056f7807..dc15ab1a27 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -17,3 +17,173 @@ height-mm = <112>; width-mm = <56>; }; + +&pmi8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "", + "VIB_LDO_EN", + "NC", + "", + "NC", + "NC", + "NC", /* GPIO_10 */ + "NC", + "CAM_IO_EN", + "", + "NC"; +}; + +&tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DISP_RESET_N", + "NC", + "CHAT_CAM_PWR_EN", + "CAM2_RSTN", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "CAM_SOF", + "TOF_INT", + "TOF_RESET_N", + "NC", + "NC", + "NC", + "MAIN_CAM_PWR_EN", + "DVDT_ENABLE", + "DVDT_WRT_DET_AND", + "DVDT_WRT_DET_OR", /* GPIO_30 */ + "NC", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "CC_DIR", + "NC", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_TRXD", + "USB_AUDIO_EN1", + "SW_SERVICE", /* GPIO_50 */ + "US_EURO_SEL", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "USB_PD_EN", + "NFC_DWLD_EN", + "NFC_IRQ", + "CODEC_RST_N", + "CODEC_SPI_MISO", + "CODEC_SPI_MOSI", + "CODEC_SPI_CLK", + "CODEC_SPI_CS_N", + "NC", + "CODEC_SLIMBUS_CLK", /* GPIO_70 */ + "CODEC_SLIMBUS_DATA0", + "CODEC_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "HW_ID_0", + "HW_ID_1", + "TX_GTR_THRES_IN", + "NC", + "NC", + "CAM1_RSTN", /* GPIO_80 */ + "", + "", + "", + "", + "TS_I2C_SDA", + "TS_I2C_SCL", + "NC", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "RFFE6_CLK", + "RFFE6_DATA", + "TS_RESET_N", + "", /* GPIO_100 */ + "GRFC4", + "DEBUG_GPIO0", + "DEBUG_GPIO1", + "RF_LCD_ID_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NC", + "NC", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT", + "RF_ID_EXTENTION", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "TRAY_DET", + "GRFC3", + "NC", + "UIM2_DETECT_EN", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "GRFC2", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "GRFC1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 7ee61b2045..b02a1dc5fe 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -67,6 +67,36 @@ }; }; + cam_vana_front_vreg: cam-vana-front-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_front_vreg"; + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vana_rear_vreg: cam-vana-rear-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_rear_vreg"; + gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vio_vreg: cam-vio-reagulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + gpio = <&pmi8998_gpios 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam_io_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -524,7 +554,41 @@ status = "okay"; }; +&pm8005_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "", + ""; +}; + &pm8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "FOCUS_N", + "", + "NC", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "NC", + "FLASH_THERM", + "NC", /* GPIO_10 */ + "LCD_ID", + "RF_ID", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "", /* GPIO_20 */ + "NFC_CLK_REQ", + "", + "", + "", + "", + ""; + focus_n: focus-n-state { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; @@ -558,6 +622,17 @@ }; }; +&pmi8998_gpios { + cam_io_en: cam-io-en-state { + pins = "gpio12"; + function = "normal"; + qcom,drive-strength = <3>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + &pmi8998_wled { default-brightness = <800>; qcom,switching-freq = <800>; @@ -626,6 +701,14 @@ bias-pull-down; }; + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + sde_te_active_sleep: sde-te-active-sleep-state { pins = "gpio10"; function = "mdp_vsync"; @@ -633,6 +716,14 @@ bias-pull-down; }; + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + ts_default: ts-default-state { reset-pins { pins = "gpio99"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 9d6faeb656..93b1582e80 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -111,7 +111,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 6db12abaa8..e386b504e9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -108,7 +108,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 63f6515692..9e594d21ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -813,7 +814,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; qseecom_mem: qseecom@8ab00000 { @@ -1197,8 +1198,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <&pcie0_lane>, - <&pcie1_lane>; + <&pcie0_phy>, + <&pcie1_phy>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", @@ -2370,7 +2371,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; status = "disabled"; @@ -2378,15 +2379,22 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sdm845-qmp-pcie-phy"; - reg = <0 0x01c06000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -2395,19 +2403,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x128>, - <0 0x01c06400 0 0x1fc>, - <0 0x01c06800 0 0x218>, - <0 0x01c06600 0 0x70>; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -2480,7 +2475,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; status = "disabled"; @@ -2488,15 +2483,22 @@ pcie1_phy: phy@1c0a000 { compatible = "qcom,sdm845-qhp-pcie-phy"; - reg = <0 0x01c0a000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0a000 0 0x2000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2505,18 +2507,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c06200 { - reg = <0 0x01c0a800 0 0x800>, - <0 0x01c0a800 0 0x800>, - <0 0x01c0b800 0 0x400>; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; mem_noc: interconnect@1380000 { @@ -3555,11 +3545,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; + port { etf_in: endpoint { remote-endpoint = <&merge_funnel_out>; @@ -3984,49 +3971,28 @@ nvmem-cells = <&qusb2s_hstx_trim>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sdm845-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "cfg_ahb"; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; usb_2_qmpphy: phy@88eb000 { @@ -4106,7 +4072,7 @@ iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -4574,8 +4540,9 @@ "ctrl_link_iface", "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -4913,8 +4880,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "gcc_disp_gpll0_div_clk_src", diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index 75951fd439..2c7a12983d 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -225,13 +225,13 @@ vcc-max-microamp = <600000>; vccq2-supply = <&vreg_l11a>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&vreg_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; - vddp-ref-clk-supply = <&vreg_l18a>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 9b70a87906..98eb072fa9 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -219,13 +219,13 @@ vcc-max-microamp = <600000>; vccq2-supply = <&pm6125_l11a>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&pm6125_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&pm6125_l4a>; vdda-pll-supply = <&pm6125_l12a>; - vddp-ref-clk-supply = <&pm6125_l18a>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index c2d15fc6c9..54da053a80 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -344,13 +344,13 @@ vcc-max-microamp = <600000>; vccq2-supply = <&pm6125_l11>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&pm6125_l18>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&pm6125_l4>; vdda-pll-supply = <&pm6125_l12>; - vddp-ref-clk-supply = <&pm6125_l18>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index fb4cba0043..08046f866f 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -179,6 +179,43 @@ /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm6125_l18>; + status = "okay"; + + panel@0 { + compatible = "samsung,sofef01-m-ams597ut01"; + reg = <0>; + + reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>; + + vddio-supply = <&pm6125_l12>; + + pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + &pm6125_adc { pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; @@ -474,6 +511,28 @@ drive-strength = <2>; bias-disable; }; + + mdss_te_active_sleep: mdss-te-active-sleep-state { + pins = "gpio89"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_dsi_active: mdss-dsi-active-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss-dsi-sleep-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index 272bc85f17..a49d3ebb19 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -400,15 +400,13 @@ vccq2-supply = <&vreg_l11a>; vcc-max-microamp = <600000>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&vreg_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l10a>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14200>; - vddp-ref-clk-supply = <&vreg_l18a>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 07081088ba..1dd3a4056e 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2021, Martin Botka */ +#include #include #include #include @@ -22,7 +23,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; - clock-output-names = "xo_board"; }; sleep_clk: sleep-clk { @@ -198,6 +198,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -683,6 +685,24 @@ status = "disabled"; }; + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; @@ -699,7 +719,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x160 0x0>; @@ -726,7 +746,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x180 0x0>; @@ -1192,22 +1212,221 @@ reg = <0x04690000 0x10000>; }; - spmi_bus: spmi@1c40000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; + mdss: display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = ; interrupt-controller; - #interrupt-cells = <4>; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_nom>; + power-domains = <&rpmpd SM6125_VDDMX>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,sm6125-dispcc"; + reg = <0x05f00000 0x20000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <0>, + <0>, + <0>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "cfg_ahb_clk", + "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; }; apps_smmu: iommu@c600000 { diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi new file mode 100644 index 0000000000..e55cd83c19 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "sm7125.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &rmtfs_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = ; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8400000>; + no-map; + }; + + venus_mem: memory@8ee00000 { + reg = <0x0 0x8ee00000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@8f300000 { + reg = <0x0 0x8f300000 0x0 0x1e00000>; + no-map; + }; + + adsp_mem: memory@91100000 { + reg = <0x0 0x91100000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: memory@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + + ipa_fw_mem: memory@93b00000 { + reg = <0x0 0x93b00000 0x0 0x10000>; + no-map; + }; + + gpu_mem: memory@93b15000 { + reg = <0x0 0x93b15000 0x0 0x2000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + no-map; + }; + + pstore_mem: ramoops@9d800000 { + compatible = "ramoops"; + reg = <0x0 0x9d800000 0x0 0x400000>; + record-size = <0x80000>; + pmsg-size = <0x200000>; + console-size = <0x100000>; + }; + + rmtfs_mem: memory@fa601000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xfa601000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = ; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = ; + }; + + vreg_l4a_0p88: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = ; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = ; + }; + + vreg_l9a_0p664: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p1: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = ; + }; + + vreg_l18a_3p0: ldo18 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_1p23: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l6c_3p0: ldo6 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6150_resin { + linux,code = ; + status = "okay"; +}; + +&pm6150_rtc { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_3p0>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <34 4>, <59 4>; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p88>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; + vdda-pll-supply = <&vreg_l11a_1p8>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p88>; + vdda-pll-supply = <&vreg_l3c_1p23>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file mode 100644 index 0000000000..e010d19575 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-xiaomi-common.dtsi" + +/ { + model = "Xiaomi Redmi Note 9 Pro (Global)"; + compatible = "xiaomi,joyeuse", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x50022 1>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi new file mode 100644 index 0000000000..12dd72859a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include "sc7180.dtsi" + +/* SM7125 uses Kryo 465 instead of Kryo 468 */ +&CPU0 { compatible = "qcom,kryo465"; }; +&CPU1 { compatible = "qcom,kryo465"; }; +&CPU2 { compatible = "qcom,kryo465"; }; +&CPU3 { compatible = "qcom,kryo465"; }; +&CPU4 { compatible = "qcom,kryo465"; }; +&CPU5 { compatible = "qcom,kryo465"; }; +&CPU6 { compatible = "qcom,kryo465"; }; +&CPU7 { compatible = "qcom,kryo465"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 18171c5d8a..ade6198055 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -5,9 +5,14 @@ /dts-v1/; +/* PM7250B is configured to use SID2/3 */ +#define PM7250B_SID 2 +#define PM7250B_SID1 3 + /* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */ #define PMK8350_SID 6 +#include #include #include #include @@ -75,7 +80,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; }; @@ -386,36 +391,10 @@ }; &i2c10 { - clock-frequency = <400000>; - status = "okay"; - /* PM8008 PMIC @ 8 and 9 */ /* PX8618 @ 26 */ /* SMB1395 PMIC @ 34 */ - - haptics@5a { - compatible = "awinic,aw8695"; - reg = <0x5a>; - interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; - - awinic,f0-preset = <2350>; - awinic,f0-coefficient = <260>; - awinic,f0-calibration-percent = <7>; - awinic,drive-level = <125>; - - awinic,f0-detection-play-time = <5>; - awinic,f0-detection-wait-time = <3>; - awinic,f0-detection-repeat = <2>; - awinic,f0-detection-trace = <15>; - - awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; - awinic,tset = /bits/ 8 <0x12>; - awinic,r-spare = /bits/ 8 <0x68>; - - awinic,bemf-upper-threshold = <4104>; - awinic,bemf-lower-threshold = <1016>; - }; + /* awinic,aw8695 @ 5a */ }; &ipa { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index f7e35e2200..3221478663 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -5,7 +5,9 @@ */ #include +#include #include +#include #include #include #include @@ -720,7 +722,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; camera_mem: memory@8b700000 { @@ -1873,7 +1875,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; @@ -1887,18 +1889,22 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", - "refgen"; + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -1907,18 +1913,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x170>, /* tx */ - <0 0x01c06400 0 0x200>, /* rx */ - <0 0x01c06800 0 0x1f0>, /* pcs */ - <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -1975,7 +1969,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; @@ -1989,18 +1983,22 @@ pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", - "refgen"; + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2009,20 +2007,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e200 { - reg = <0 0x01c0e200 0 0x170>, /* tx0 */ - <0 0x01c0e400 0 0x200>, /* rx0 */ - <0 0x01c0ea00 0 0x1f0>, /* pcs */ - <0 0x01c0e600 0 0x170>, /* tx1 */ - <0 0x01c0e800 0 0x200>, /* rx1 */ - <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; ufs_mem_hc: ufshc@1d84000 { @@ -2973,11 +2957,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; + port { replicator1_in: endpoint { remote-endpoint = <&replicator_out1>; }; @@ -3442,38 +3423,27 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sm8150-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8150-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; usb_2_qmpphy: phy@88eb000 { @@ -3614,7 +3584,7 @@ iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -3949,8 +3919,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index ecdc20bc10..e07d0311ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -18,7 +18,12 @@ qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ qcom,board-id = <0x10008 0>; + aliases { + serial0 = &uart12; + }; + chosen { + stdout-path = "serial0:115200n8"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 1a98481d0c..d59a99ca87 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -371,6 +372,12 @@ }; }; + qup_virt: interconnect-qup-virt { + compatible = "qcom,sm8250-qup-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -1023,6 +1030,13 @@ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1039,6 +1053,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1055,6 +1075,13 @@ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1071,6 +1098,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1087,6 +1120,13 @@ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1103,6 +1143,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1119,6 +1165,13 @@ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1135,6 +1188,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1150,6 +1209,10 @@ interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1164,6 +1227,13 @@ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1180,6 +1250,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1195,6 +1271,10 @@ interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1209,6 +1289,13 @@ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, <&gpi_dma2 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1225,6 +1312,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1277,6 +1370,13 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1293,6 +1393,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1309,6 +1415,13 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1325,6 +1438,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1341,6 +1460,13 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1357,6 +1483,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1372,6 +1504,10 @@ interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1386,6 +1522,13 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1402,6 +1545,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1418,6 +1567,13 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1434,6 +1590,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1450,6 +1612,13 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1466,6 +1635,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1482,6 +1657,13 @@ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1498,6 +1680,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1513,6 +1701,10 @@ interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1527,6 +1719,13 @@ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1543,6 +1742,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1592,6 +1797,13 @@ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1608,6 +1820,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1624,6 +1842,13 @@ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1640,6 +1865,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1656,6 +1887,13 @@ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1672,6 +1910,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1688,6 +1932,13 @@ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1704,6 +1955,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1720,6 +1977,13 @@ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1736,6 +2000,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1751,6 +2021,10 @@ interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1765,6 +2039,13 @@ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1781,6 +2062,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1898,7 +2185,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; @@ -1913,15 +2200,23 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_WIFI_CLKREF_EN>, - <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -1930,20 +2225,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x170>, /* tx */ - <0 0x01c06400 0 0x200>, /* rx */ - <0 0x01c06800 0 0x1f0>, /* pcs */ - <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -2005,7 +2286,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; @@ -2020,15 +2301,23 @@ pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2037,22 +2326,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e200 { - reg = <0 0x01c0e200 0 0x170>, /* tx0 */ - <0 0x01c0e400 0 0x200>, /* rx0 */ - <0 0x01c0ea00 0 0x1f0>, /* pcs */ - <0 0x01c0e600 0 0x170>, /* tx1 */ - <0 0x01c0e800 0 0x200>, /* rx1 */ - <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; pcie2: pci@1c10000 { @@ -2114,7 +2387,7 @@ power-domains = <&gcc PCIE_2_GDSC>; - phys = <&pcie2_lane>; + phys = <&pcie2_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; @@ -2129,15 +2402,23 @@ pcie2_phy: phy@1c16000 { compatible = "qcom,sm8250-qmp-modem-pcie-phy"; - reg = <0 0x01c16000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c16000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_MDM_CLKREF_EN>, - <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_2_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "phy"; @@ -2146,22 +2427,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie2_lane: phy@1c16200 { - reg = <0 0x01c16200 0 0x170>, /* tx0 */ - <0 0x01c16400 0 0x200>, /* rx0 */ - <0 0x01c16a00 0 0x1f0>, /* pcs */ - <0 0x01c16600 0 0x170>, /* tx1 */ - <0 0x01c16800 0 0x200>, /* rx1 */ - <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "pcie_2_pipe_clk"; - }; }; ufs_mem_hc: ufshc@1d84000 { @@ -2830,11 +3095,8 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { tpda_out_funnel_qatb: endpoint { remote-endpoint = <&funnel_qatb_in_tpda>; }; @@ -2877,11 +3139,7 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_qatb_in_tpda: endpoint { remote-endpoint = <&tpda_out_funnel_qatb>; }; @@ -3090,11 +3348,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { etf_in_funnel_swao_out: endpoint { remote-endpoint = <&funnel_swao_out_etf>; }; @@ -3178,8 +3433,6 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; port { tpdm_mm_out_tpda9: endpoint { remote-endpoint = <&tpda_9_in_tpdm_mm>; @@ -3445,11 +3698,7 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_apss_merg_in_funnel_apss: endpoint { remote-endpoint = <&funnel_apss_out_funnel_apss_merg>; }; @@ -3580,47 +3829,45 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8250-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #phy-cells = <0>; - #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_1_qmpphy_out: endpoint {}; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint {}; + }; }; }; @@ -3892,8 +4139,12 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_role_switch_out: endpoint {}; + }; }; }; @@ -4383,6 +4634,14 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -4410,6 +4669,85 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8250-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; @@ -4586,8 +4924,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 4013d25a7d..b43d264ed4 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -7,7 +7,12 @@ #include #include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" #include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8350 HDK"; @@ -294,6 +299,81 @@ regulator-initial-mode = ; }; }; + + regulators-2 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1280000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <976000>; + }; + + vreg_s3e_2p20: smps3 { + regulator-name = "vreg_s3e_2p20"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2352000>; + }; + + vreg_l1e_0p9: ldo1 { + regulator-name = "vreg_l1e_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + }; + + vreg_l2e_1p2: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1872000>; + }; + + vreg_l5e_0p8: ldo5 { + regulator-name = "vreg_l5e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6e_0p8: ldo6 { + regulator-name = "vreg_l6e_0p8"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; }; &cdsp { @@ -760,6 +840,7 @@ vcc-max-microamp = <800000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <900000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index c5a6c87456..8bee57f3b2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -325,6 +325,7 @@ vcc-max-microamp = <800000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <900000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a7cf506f24..a72f3c4700 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -503,7 +504,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; hyp_reserved_mem: memory@d0000000 { @@ -2020,7 +2021,7 @@ compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2062,7 +2063,7 @@ compatible = "qcom,sm8350-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3206,7 +3207,7 @@ compatible = "qcom,sm8350-adsp-pas"; reg = <0 0x17300000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3511,7 +3512,7 @@ compatible = "qcom,sm8350-cdsp-pas"; reg = <0 0x98900000 0 0x1400000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index bd5e8181f2..20153d08ed 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -915,14 +915,23 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", - "VA DMIC0", "MIC BIAS1", - "VA DMIC1", "MIC BIAS1", - "VA DMIC2", "MIC BIAS3", - "TX DMIC0", "MIC BIAS1", - "TX DMIC1", "MIC BIAS2", - "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX DMIC0", "MIC BIAS3", + "TX DMIC1", "MIC BIAS3", + "TX DMIC2", "MIC BIAS1", + "TX DMIC3", "MIC BIAS1", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -1073,6 +1082,7 @@ vcc-max-microamp = <1100000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 3747932770..c7d05945aa 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -443,6 +443,7 @@ vcc-max-microamp = <1100000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 001fb2723f..8b29fcf483 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -80,7 +80,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; ramoops@ffc00000 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 79cc8fbcd8..f82480570d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -540,7 +541,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; xbl_sc_mem2: memory@a6e00000 { @@ -750,8 +751,8 @@ #power-domain-cells = <1>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, - <&pcie0_lane>, - <&pcie1_lane>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, @@ -1738,11 +1739,6 @@ }; }; - rng: rng@10c3000 { - compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee"; - reg = <0 0x010c3000 0 0x1000>; - }; - pcie0: pci@1c00000 { compatible = "qcom,pcie-sm8450-pcie0"; reg = <0 0x01c00000 0 0x3000>, @@ -1780,7 +1776,7 @@ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, - <&pcie0_lane>, + <&pcie0_phy>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, @@ -1811,7 +1807,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; @@ -1825,15 +1821,23 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x200>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x2000>; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_EN>, - <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -1842,19 +1846,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06e00 0 0x200>, /* tx */ - <0 0x01c07000 0 0x200>, /* rx */ - <0 0x01c06200 0 0x200>, /* pcs */ - <0 0x01c06600 0 0x200>; /* pcs_pcie */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -1894,7 +1885,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_lane>, + <&pcie1_phy>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -1923,7 +1914,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; @@ -1935,17 +1926,25 @@ status = "disabled"; }; - pcie1_phy: phy@1c0f000 { + pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; - reg = <0 0x01c0f000 0 0x200>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x2000>; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_EN>, - <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -1954,21 +1953,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e000 { - reg = <0 0x01c0e000 0 0x200>, /* tx */ - <0 0x01c0e200 0 0x300>, /* rx */ - <0 0x01c0f200 0 0x200>, /* pcs */ - <0 0x01c0e800 0 0x200>, /* tx */ - <0 0x01c0ea00 0 0x300>, /* rx */ - <0 0x01c0f400 0 0xc00>; /* pcs_pcie */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; config_noc: interconnect@1500000 { @@ -2176,7 +2160,7 @@ #sound-dai-cells = <1>; }; - swr4: soundwire-controller@31f0000 { + swr4: soundwire@31f0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x031f0000 0 0x2000>; interrupts = ; @@ -2224,7 +2208,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03210000 0 0x2000>; interrupts = ; @@ -2291,7 +2275,7 @@ #sound-dai-cells = <1>; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03250000 0 0x2000>; interrupts = ; @@ -2318,7 +2302,7 @@ status = "disabled"; }; - swr2: soundwire-controller@33b0000 { + swr2: soundwire@33b0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x033b0000 0 0x2000>; interrupts = , diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index f29cce5186..9a70875028 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -13,7 +13,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 MTP"; @@ -58,6 +59,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -797,8 +799,7 @@ vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 2c09ce8aea..eef811def3 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -14,7 +14,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 QRD"; @@ -23,6 +24,7 @@ aliases { serial0 = &uart7; + serial1 = &uart14; }; wcd938x: audio-codec { @@ -75,6 +77,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -765,6 +768,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; @@ -842,6 +849,21 @@ &tlmm { gpio-reserved-ranges = <32 8>; + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; @@ -883,14 +905,36 @@ status = "okay"; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s4e_0p95>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa0p8-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p9-supply = <&vreg_s6g_1p86>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3a228d4f0c..e15564ed54 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -5,11 +5,13 @@ #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -580,7 +582,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = ; }; mpss_dsm_mem: mpss-dsm-region@d4d00000 { @@ -1064,6 +1066,20 @@ status = "disabled"; }; + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c15: i2c@89c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0089c000 0 0x4000>; @@ -2044,7 +2060,7 @@ #sound-dai-cells = <1>; }; - swr3: soundwire-controller@6ab0000 { + swr3: soundwire@6ab0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ab0000 0 0x10000>; interrupts = ; @@ -2090,7 +2106,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@6ad0000 { + swr1: soundwire@6ad0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ad0000 0 0x10000>; interrupts = ; @@ -2155,7 +2171,7 @@ #sound-dai-cells = <1>; }; - swr0: soundwire-controller@6b10000 { + swr0: soundwire@6b10000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06b10000 0 0x10000>; interrupts = ; @@ -2182,7 +2198,7 @@ status = "disabled"; }; - swr2: soundwire-controller@6d30000 { + swr2: soundwire@6d30000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06d30000 0 0x10000>; interrupts = , @@ -2430,6 +2446,20 @@ #power-domain-cells = <1>; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8550-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3508,6 +3538,22 @@ bias-disable; }; + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio78", "gpio79"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio76", "gpio77"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_sleep: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; -- cgit v1.2.3