From 01a69402cf9d38ff180345d55c2ee51c7e89fbc7 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:50:03 +0200 Subject: Adding upstream version 6.8.9. Signed-off-by: Daniel Baumann --- arch/arm64/boot/dts/renesas/draak.dtsi | 32 ++-- arch/arm64/boot/dts/renesas/ebisu.dtsi | 6 + arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 15 ++ arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 110 +++++++++++ arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 2 +- arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 1 + arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi | 1 + arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi | 214 +++++++++++++++++++++- arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 65 +++++++ 9 files changed, 424 insertions(+), 22 deletions(-) (limited to 'arch/arm64/boot/dts/renesas') diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index ef3bb835d5..6f133f54de 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -356,12 +356,9 @@ * CVBS and HDMI inputs through SW[49-53] * switches. * - * CVBS is the default selection, link it to - * VIN4 here. + * HDMI is the default selection, leave CVBS + * not connected here. */ - adv7180_out: endpoint { - remote-endpoint = <&vin4_in>; - }; }; }; @@ -374,6 +371,12 @@ interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -423,13 +426,11 @@ * CVBS and HDMI inputs through SW[49-53] * switches. * - * CVBS is the default selection, leave HDMI - * not connected here. + * HDMI is the default selection, link it to + * VIN4 here. */ adv7612_out: endpoint { - pclk-sample = <0>; - hsync-active = <0>; - vsync-active = <0>; + remote-endpoint = <&vin4_in>; }; }; }; @@ -580,8 +581,8 @@ function = "usb0"; }; - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; + vin4_pins: vin4 { + groups = "vin4_data24", "vin4_sync", "vin4_clk"; function = "vin4"; }; }; @@ -729,7 +730,7 @@ }; &vin4 { - pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-0 = <&vin4_pins>; pinctrl-names = "default"; status = "okay"; @@ -737,7 +738,10 @@ ports { port { vin4_in: endpoint { - remote-endpoint = <&adv7180_out>; + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + remote-endpoint = <&adv7612_out>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index f1a5778ef1..cba2fde9dd 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -403,6 +403,12 @@ interrupt-parent = <&gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 405404c084..0608dce92e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -29,6 +29,15 @@ stdout-path = "serial0:115200n8"; }; + d1p8: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3p3: regulator-fixed { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -166,6 +175,12 @@ interrupt-parent = <&gpio1>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1p8>; + dvdd-supply = <&d1p8>; + pvdd-supply = <&d1p8>; + dvdd-3v-supply = <&d3p3>; + bgvdd-supply = <&d1p8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 6c7b29b69d..6315ffa6c1 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -96,6 +96,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + interrupt-parent = <&irqc>; gpio-ranges = <&pinctrl 0 0 152>; clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>; power-domains = <&cpg>; @@ -104,6 +105,77 @@ <&cpg R9A08G045_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@11050000 { + compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x11050000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0"; + clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>, + <&cpg CPG_MOD R9A08G045_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_IA55_RESETN>; + }; + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; @@ -149,6 +221,44 @@ status = "disabled"; }; + eth0: ethernet@11c30000 { + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>, + <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A08G045_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c40000 { + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; + reg = <0 0x11c40000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>, + <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A08G045_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@12400000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 33f2ecf424..50ed66d42a 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -163,7 +163,7 @@ }; avb: ethernet@a3300000 { - compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; + compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; interrupts = , /* ch0: Rx0 BE */ , /* ch1: Rx1 NC */ diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 547859c388..4409c47239 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -312,6 +312,7 @@ m25p,fast-read; spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 56ff924539..5e4209d6fb 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -241,6 +241,7 @@ m25p,fast-read; spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index a199de8f8b..d33ab4c887 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -9,18 +9,36 @@ #include /* - * Signals of SW_CONFIG switches: - * @SW_SD0_DEV_SEL: - * 0 - SD0 is connected to eMMC - * 1 - SD0 is connected to uSD0 card + * On-board switches' states: + * @SW_OFF: switch's state is OFF + * @SW_ON: switch's state is ON */ -#define SW_SD0_DEV_SEL 1 +#define SW_OFF 0 +#define SW_ON 1 + +/* + * SW_CONFIG[x] switches' states: + * @SW_CONFIG2: + * SW_OFF - SD0 is connected to eMMC + * SW_ON - SD0 is connected to uSD0 card + * @SW_CONFIG3: + * SW_OFF - SD2 is connected to SoC + * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC + */ +#define SW_CONFIG2 SW_ON +#define SW_CONFIG3 SW_ON / { compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045"; aliases { mmc0 = &sdhi0; +#if SW_CONFIG3 == SW_OFF + mmc2 = &sdhi2; +#else + eth0 = ð0; + eth1 = ð1; +#endif }; chosen { @@ -43,7 +61,7 @@ enable-active-high; }; -#if SW_SD0_DEV_SEL +#if SW_CONFIG2 == SW_ON vccq_sdhi0: regulator1 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -63,13 +81,76 @@ regulator-always-on; }; #endif + + vcc_sdhi2: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +#if SW_CONFIG3 == SW_ON +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + reg = <7>; + interrupt-parent = <&pinctrl>; + interrupts = ; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; }; +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + reg = <7>; + interrupt-parent = <&pinctrl>; + interrupts = ; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; +#endif + &extal_clk { clock-frequency = <24000000>; }; -#if SW_SD0_DEV_SEL +#if SW_CONFIG2 == SW_ON /* SD0 slot */ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; @@ -100,7 +181,104 @@ }; #endif +#if SW_CONFIG3 == SW_OFF +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sdhi2>; + bus-width = <4>; + max-frequency = <50000000>; + status = "okay"; +}; +#endif + &pinctrl { +#if SW_CONFIG3 == SW_ON + eth0-phy-irq-hog { + gpio-hog; + gpios = ; + input; + line-name = "eth0-phy-irq"; + }; +#endif + + eth0_pins: eth0 { + txc { + pinmux = ; /* ET0_TXC */ + power-source = <1800>; + output-enable; + input-enable; + drive-strength-microamp = <5200>; + }; + + tx_ctl { + pinmux = ; /* ET0_TX_CTL */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + mux { + pinmux = , /* ET0_TXD0 */ + , /* ET0_TXD1 */ + , /* ET0_TXD2 */ + , /* ET0_TXD3 */ + , /* ET0_RXC */ + , /* ET0_RX_CTL */ + , /* ET0_RXD0 */ + , /* ET0_RXD1 */ + , /* ET0_RXD2 */ + , /* ET0_RXD3 */ + , /* ET0_MDC */ + , /* ET0_MDIO */ + ; /* ET0_LINKSTA */ + power-source = <1800>; + }; + }; + +#if SW_CONFIG3 == SW_ON + eth1-phy-irq-hog { + gpio-hog; + gpios = ; + input; + line-name = "eth1-phy-irq"; + }; +#endif + + eth1_pins: eth1 { + txc { + pinmux = ; /* ET1_TXC */ + power-source = <1800>; + output-enable; + input-enable; + drive-strength-microamp = <5200>; + }; + + tx_ctl { + pinmux = ; /* ET1_TX_CTL */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + mux { + pinmux = , /* ET1_TXD0 */ + , /* ET1_TXD1 */ + , /* ET1_TXD2 */ + , /* ET1_TXD3 */ + , /* ET1_RXC */ + , /* ET1_RX_CTL */ + , /* ET1_RXD0 */ + , /* ET1_RXD1 */ + , /* ET1_RXD2 */ + , /* ET1_RXD3 */ + , /* ET1_MDC */ + , /* ET1_MDIO */ + ; /* ET1_LINKSTA */ + power-source = <1800>; + }; + }; + sdhi0_pins: sd0 { data { pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; @@ -139,4 +317,26 @@ "SD0_CLK", "SD0_CMD", "SD0_RST#"; power-source = <1800>; }; + + sdhi2_pins: sd2 { + data { + pins = "P11_2", "P11_3", "P12_0", "P12_1"; + input-enable; + }; + + ctrl { + pins = "P11_1"; + input-enable; + }; + + mux { + pinmux = , /* SD2_CLK */ + , /* SD2_CMD */ + , /* SD2_DATA0 */ + , /* SD2_DATA1 */ + , /* SD2_DATA2 */ + , /* SD2_DATA3 */ + ; /* SD2_CD# */ + }; + }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi index e7073a09ed..2145201372 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -11,6 +11,26 @@ / { aliases { serial0 = &scif0; + mmc1 = &sdhi1; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; }; }; @@ -19,6 +39,38 @@ pinmux = , /* RXD */ ; /* TXD */ }; + + sdhi1_pins: sd1 { + data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + cd { + pinmux = ; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1-uhs { + data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + cd { + pinmux = ; /* SD1_CD */ + }; + }; }; &scif0 { @@ -26,3 +78,16 @@ pinctrl-0 = <&scif0_pins>; status = "okay"; }; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <125000000>; + status = "okay"; +}; -- cgit v1.2.3