From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../boot/dts/rockchip/rk3566-soquartz-cm4.dts | 192 +++++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts (limited to 'arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts') diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts new file mode 100644 index 0000000000..cddf6cd2fe --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-soquartz.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; + compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; + + /* labeled +12v in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* labeled +5v in schematic */ + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc_sd_pwr: vcc-sd-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd_pwr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +/* phy for pcie */ +&combphy2 { + phy-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "okay"; + + /* + * the rtc interrupt is tied to PMIC_PWRON, + * it will force reset the board if triggered. + */ + pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + }; +}; + +/* + * i2c2 is exposed on CM1 / Module1A - to PI40 + * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A - to PI40 + * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B - to PI40 + * pin 45 - GPIO24 - i2c4_scl_m1 + * pin 47 - GPIO23 - i2c4_sda_m1 + */ +&i2c4 { + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A - to PI40 + * pin 24 - GPIO26 - i2s1_sdi1_m1 + * pin 25 - GPIO21 - i2s1_sdo0_m1 + * pin 26 - GPIO19 - i2s1_lrck_tx_m1 + * pin 27 - GPIO20 - i2s1_sdi0_m1 + * pin 29 - GPIO16 - i2s1_sdi3_m1 + * pin 30 - GPIO6 - i2s1_sdi2_m1 + * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - GPIO25 - i2s1_sdo2_m1 + * pin 49 - GPIO18 - i2s1_sclk_tx_m1 + * pin 50 - GPIO17 - i2s1_mclk_m1 + * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + status = "disabled"; +}; + +&led_diy { + status = "okay"; +}; + +&led_work { + status = "okay"; +}; + +&pcie2x1 { + vpcie3v3-supply = <&vcc_3v3>; + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A - to J2 + * pin 94 - AIN1 - saradc_vin3 + * pin 96 - AIN0 - saradc_vin2 + */ +&saradc { + status = "disabled"; +}; + +&sdmmc0 { + vmmc-supply = <&vcc_sd_pwr>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A - to PI40 + * pin 37 - GPIO7 - spi3_cs1_m0 + * pin 38 - GPIO11 - spi3_clk_m0 + * pin 39 - GPIO8 - spi3_cs0_m0 + * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - GPIO10 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +/* + * uart2 is exposed on CM1 / Module1A - to PI40 + * pin 51 - GPIO15 - uart2_rx_m0 + * pin 55 - GPIO14 - uart2_tx_m0 + */ +&uart2 { + status = "okay"; +}; + +/* + * uart7 is exposed on CM1 / Module1A - to PI40 + * pin 46 - GPIO22 - uart7_tx_m2 + * pin 47 - GPIO23 - uart7_rx_m2 + */ +&uart7 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc_5v>; + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&vbus { + vin-supply = <&vcc_5v>; +}; -- cgit v1.2.3