From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Thu, 11 Apr 2024 10:27:49 +0200
Subject: Adding upstream version 6.6.15.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/hexagon/kernel/setup.c | 137 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 arch/hexagon/kernel/setup.c

(limited to 'arch/hexagon/kernel/setup.c')

diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c
new file mode 100644
index 000000000..621674e86
--- /dev/null
+++ b/arch/hexagon/kernel/setup.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Arch related setup for Hexagon
+ *
+ * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/memblock.h>
+#include <linux/mmzone.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/of_fdt.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/hexagon_vm.h>
+#include <asm/vm_mmu.h>
+#include <asm/time.h>
+
+char cmd_line[COMMAND_LINE_SIZE];
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+
+int on_simulator;
+
+void calibrate_delay(void)
+{
+	loops_per_jiffy = thread_freq_mhz * 1000000 / HZ;
+}
+
+/*
+ * setup_arch -  high level architectural setup routine
+ * @cmdline_p: pointer to pointer to command-line arguments
+ */
+
+void __init setup_arch(char **cmdline_p)
+{
+	char *p = &external_cmdline_buffer;
+
+	/*
+	 * These will eventually be pulled in via either some hypervisor
+	 * or devicetree description.  Hardwiring for now.
+	 */
+	pcycle_freq_mhz = 600;
+	thread_freq_mhz = 100;
+	sleep_clk_freq = 32000;
+
+	/*
+	 * Set up event bindings to handle exceptions and interrupts.
+	 */
+	__vmsetvec(_K_VM_event_vector);
+
+	printk(KERN_INFO "PHYS_OFFSET=0x%08lx\n", PHYS_OFFSET);
+
+	/*
+	 * Simulator has a few differences from the hardware.
+	 * For now, check uninitialized-but-mapped memory
+	 * prior to invoking setup_arch_memory().
+	 */
+	if (*(int *)((unsigned long)_end + 8) == 0x1f1f1f1f)
+		on_simulator = 1;
+	else
+		on_simulator = 0;
+
+	if (p[0] != '\0')
+		strscpy(boot_command_line, p, COMMAND_LINE_SIZE);
+	else
+		strscpy(boot_command_line, default_command_line,
+			COMMAND_LINE_SIZE);
+
+	/*
+	 * boot_command_line and the value set up by setup_arch
+	 * are both picked up by the init code. If no reason to
+	 * make them different, pass the same pointer back.
+	 */
+	strscpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	parse_early_param();
+
+	setup_arch_memory();
+
+#ifdef CONFIG_SMP
+	smp_start_cpus();
+#endif
+}
+
+/*
+ * Functions for dumping CPU info via /proc
+ * Probably should move to kernel/proc.c or something.
+ */
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < nr_cpu_ids ? (void *)((unsigned long) *pos + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+/*
+ * Eventually this will dump information about
+ * CPU properties like ISA level, TLB size, etc.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	int cpu = (unsigned long) v - 1;
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(cpu))
+		return 0;
+#endif
+
+	seq_printf(m, "processor\t: %d\n", cpu);
+	seq_printf(m, "model name\t: Hexagon Virtual Machine\n");
+	seq_printf(m, "BogoMips\t: %lu.%02lu\n",
+		(loops_per_jiffy * HZ) / 500000,
+		((loops_per_jiffy * HZ) / 5000) % 100);
+	seq_printf(m, "\n");
+	return 0;
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start  = &c_start,
+	.next   = &c_next,
+	.stop   = &c_stop,
+	.show   = &show_cpuinfo,
+};
-- 
cgit v1.2.3