From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Thu, 11 Apr 2024 10:27:49 +0200
Subject: Adding upstream version 6.6.15.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/powerpc/boot/dts/lite5200b.dts | 157 ++++++++++++++++++++++++++++++++++++
 1 file changed, 157 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/lite5200b.dts

(limited to 'arch/powerpc/boot/dts/lite5200b.dts')

diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
new file mode 100644
index 0000000000..7e2d91c7cb
--- /dev/null
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Lite5200B board Device Tree Source
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/ {
+	model = "fsl,lite5200b";
+	compatible = "fsl,lite5200b";
+
+	leds {
+		compatible = "gpio-leds";
+		tmr2 {
+			gpios = <&gpt2 0 1>;
+		};
+		tmr3 {
+			gpios = <&gpt3 0 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led1 { gpios = <&gpio_wkup 2 1>; };
+		led2 { gpios = <&gpio_simple 3 1>; };
+		led3 { gpios = <&gpio_wkup 3 1>; };
+		led4 { gpios = <&gpio_simple 2 1>; };
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x10000000>;	// 256MB
+	};
+
+	soc5200@f0000000 {
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <0>;
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//};
+
+		// PSC3 in CODEC mode example
+		//i2s@2400 {		// PSC3
+		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
+		//	cell-index = <2>;
+		//};
+
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xfe000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <1>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "rootfs";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "u-boot";
+				reg = <0x01f00000 0x00060000>;
+			};
+			partition@1f60000 {
+				label = "u-boot-env";
+				reg = <0x01f60000 0x00020000>;
+			};
+			partition@1f80000 {
+				label = "dtb";
+				reg = <0x01f80000 0x00080000>;
+			};
+		};
+	};
+
+};
-- 
cgit v1.2.3