From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/sparc/kernel/sbus.c | 679 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 679 insertions(+) create mode 100644 arch/sparc/kernel/sbus.c (limited to 'arch/sparc/kernel/sbus.c') diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c new file mode 100644 index 0000000000..0bababf6f2 --- /dev/null +++ b/arch/sparc/kernel/sbus.c @@ -0,0 +1,679 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * sbus.c: UltraSparc SBUS controller support. + * + * Copyright (C) 1999 David S. Miller (davem@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "iommu_common.h" + +#define MAP_BASE ((u32)0xc0000000) + +/* Offsets from iommu_regs */ +#define SYSIO_IOMMUREG_BASE 0x2400UL +#define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */ +#define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */ +#define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */ +#define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */ +#define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */ +#define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */ +#define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */ +#define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */ + +#define IOMMU_DRAM_VALID (1UL << 30UL) + +/* Offsets from strbuf_regs */ +#define SYSIO_STRBUFREG_BASE 0x2800UL +#define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */ +#define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */ +#define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */ +#define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */ +#define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */ +#define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */ +#define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */ + +#define STRBUF_TAG_VALID 0x02UL + +/* Enable 64-bit DVMA mode for the given device. */ +void sbus_set_sbus64(struct device *dev, int bursts) +{ + struct iommu *iommu = dev->archdata.iommu; + struct platform_device *op = to_platform_device(dev); + const struct linux_prom_registers *regs; + unsigned long cfg_reg; + int slot; + u64 val; + + regs = of_get_property(op->dev.of_node, "reg", NULL); + if (!regs) { + printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %pOF\n", + op->dev.of_node); + return; + } + slot = regs->which_io; + + cfg_reg = iommu->write_complete_reg; + switch (slot) { + case 0: + cfg_reg += 0x20UL; + break; + case 1: + cfg_reg += 0x28UL; + break; + case 2: + cfg_reg += 0x30UL; + break; + case 3: + cfg_reg += 0x38UL; + break; + case 13: + cfg_reg += 0x40UL; + break; + case 14: + cfg_reg += 0x48UL; + break; + case 15: + cfg_reg += 0x50UL; + break; + + default: + return; + } + + val = upa_readq(cfg_reg); + if (val & (1UL << 14UL)) { + /* Extended transfer mode already enabled. */ + return; + } + + val |= (1UL << 14UL); + + if (bursts & DMA_BURST8) + val |= (1UL << 1UL); + if (bursts & DMA_BURST16) + val |= (1UL << 2UL); + if (bursts & DMA_BURST32) + val |= (1UL << 3UL); + if (bursts & DMA_BURST64) + val |= (1UL << 4UL); + upa_writeq(val, cfg_reg); +} +EXPORT_SYMBOL(sbus_set_sbus64); + +/* INO number to IMAP register offset for SYSIO external IRQ's. + * This should conform to both Sunfire/Wildfire server and Fusion + * desktop designs. + */ +#define SYSIO_IMAP_SLOT0 0x2c00UL +#define SYSIO_IMAP_SLOT1 0x2c08UL +#define SYSIO_IMAP_SLOT2 0x2c10UL +#define SYSIO_IMAP_SLOT3 0x2c18UL +#define SYSIO_IMAP_SCSI 0x3000UL +#define SYSIO_IMAP_ETH 0x3008UL +#define SYSIO_IMAP_BPP 0x3010UL +#define SYSIO_IMAP_AUDIO 0x3018UL +#define SYSIO_IMAP_PFAIL 0x3020UL +#define SYSIO_IMAP_KMS 0x3028UL +#define SYSIO_IMAP_FLPY 0x3030UL +#define SYSIO_IMAP_SHW 0x3038UL +#define SYSIO_IMAP_KBD 0x3040UL +#define SYSIO_IMAP_MS 0x3048UL +#define SYSIO_IMAP_SER 0x3050UL +#define SYSIO_IMAP_TIM0 0x3060UL +#define SYSIO_IMAP_TIM1 0x3068UL +#define SYSIO_IMAP_UE 0x3070UL +#define SYSIO_IMAP_CE 0x3078UL +#define SYSIO_IMAP_SBERR 0x3080UL +#define SYSIO_IMAP_PMGMT 0x3088UL +#define SYSIO_IMAP_GFX 0x3090UL +#define SYSIO_IMAP_EUPA 0x3098UL + +#define bogon ((unsigned long) -1) +static unsigned long sysio_irq_offsets[] = { + /* SBUS Slot 0 --> 3, level 1 --> 7 */ + SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, + SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, + SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, + SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, + SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, + SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, + SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, + SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, + + /* Onboard devices (not relevant/used on SunFire). */ + SYSIO_IMAP_SCSI, + SYSIO_IMAP_ETH, + SYSIO_IMAP_BPP, + bogon, + SYSIO_IMAP_AUDIO, + SYSIO_IMAP_PFAIL, + bogon, + bogon, + SYSIO_IMAP_KMS, + SYSIO_IMAP_FLPY, + SYSIO_IMAP_SHW, + SYSIO_IMAP_KBD, + SYSIO_IMAP_MS, + SYSIO_IMAP_SER, + bogon, + bogon, + SYSIO_IMAP_TIM0, + SYSIO_IMAP_TIM1, + bogon, + bogon, + SYSIO_IMAP_UE, + SYSIO_IMAP_CE, + SYSIO_IMAP_SBERR, + SYSIO_IMAP_PMGMT, +}; + +#undef bogon + +#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) + +/* Convert Interrupt Mapping register pointer to associated + * Interrupt Clear register pointer, SYSIO specific version. + */ +#define SYSIO_ICLR_UNUSED0 0x3400UL +#define SYSIO_ICLR_SLOT0 0x3408UL +#define SYSIO_ICLR_SLOT1 0x3448UL +#define SYSIO_ICLR_SLOT2 0x3488UL +#define SYSIO_ICLR_SLOT3 0x34c8UL +static unsigned long sysio_imap_to_iclr(unsigned long imap) +{ + unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; + return imap + diff; +} + +static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino) +{ + struct iommu *iommu = op->dev.archdata.iommu; + unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; + unsigned long imap, iclr; + int sbus_level = 0; + + imap = sysio_irq_offsets[ino]; + if (imap == ((unsigned long)-1)) { + prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n", + ino); + prom_halt(); + } + imap += reg_base; + + /* SYSIO inconsistency. For external SLOTS, we have to select + * the right ICLR register based upon the lower SBUS irq level + * bits. + */ + if (ino >= 0x20) { + iclr = sysio_imap_to_iclr(imap); + } else { + int sbus_slot = (ino & 0x18)>>3; + + sbus_level = ino & 0x7; + + switch(sbus_slot) { + case 0: + iclr = reg_base + SYSIO_ICLR_SLOT0; + break; + case 1: + iclr = reg_base + SYSIO_ICLR_SLOT1; + break; + case 2: + iclr = reg_base + SYSIO_ICLR_SLOT2; + break; + default: + case 3: + iclr = reg_base + SYSIO_ICLR_SLOT3; + break; + } + + iclr += ((unsigned long)sbus_level - 1UL) * 8UL; + } + return build_irq(sbus_level, iclr, imap); +} + +/* Error interrupt handling. */ +#define SYSIO_UE_AFSR 0x0030UL +#define SYSIO_UE_AFAR 0x0038UL +#define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ +#define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ +#define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ +#define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */ +#define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ +#define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ +#define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */ +#define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */ +#define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ +#define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ +#define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ +static irqreturn_t sysio_ue_handler(int irq, void *dev_id) +{ + struct platform_device *op = dev_id; + struct iommu *iommu = op->dev.archdata.iommu; + unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; + unsigned long afsr_reg, afar_reg; + unsigned long afsr, afar, error_bits; + int reported, portid; + + afsr_reg = reg_base + SYSIO_UE_AFSR; + afar_reg = reg_base + SYSIO_UE_AFAR; + + /* Latch error status. */ + afsr = upa_readq(afsr_reg); + afar = upa_readq(afar_reg); + + /* Clear primary/secondary error status bits. */ + error_bits = afsr & + (SYSIO_UEAFSR_PPIO | SYSIO_UEAFSR_PDRD | SYSIO_UEAFSR_PDWR | + SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR); + upa_writeq(error_bits, afsr_reg); + + portid = of_getintprop_default(op->dev.of_node, "portid", -1); + + /* Log the error. */ + printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n", + portid, + (((error_bits & SYSIO_UEAFSR_PPIO) ? + "PIO" : + ((error_bits & SYSIO_UEAFSR_PDRD) ? + "DVMA Read" : + ((error_bits & SYSIO_UEAFSR_PDWR) ? + "DVMA Write" : "???"))))); + printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n", + portid, + (afsr & SYSIO_UEAFSR_DOFF) >> 45UL, + (afsr & SYSIO_UEAFSR_SIZE) >> 42UL, + (afsr & SYSIO_UEAFSR_MID) >> 37UL); + printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); + printk("SYSIO[%x]: Secondary UE errors [", portid); + reported = 0; + if (afsr & SYSIO_UEAFSR_SPIO) { + reported++; + printk("(PIO)"); + } + if (afsr & SYSIO_UEAFSR_SDRD) { + reported++; + printk("(DVMA Read)"); + } + if (afsr & SYSIO_UEAFSR_SDWR) { + reported++; + printk("(DVMA Write)"); + } + if (!reported) + printk("(none)"); + printk("]\n"); + + return IRQ_HANDLED; +} + +#define SYSIO_CE_AFSR 0x0040UL +#define SYSIO_CE_AFAR 0x0048UL +#define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ +#define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ +#define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ +#define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */ +#define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ +#define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ +#define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */ +#define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */ +#define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */ +#define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ +#define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ +#define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ +static irqreturn_t sysio_ce_handler(int irq, void *dev_id) +{ + struct platform_device *op = dev_id; + struct iommu *iommu = op->dev.archdata.iommu; + unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; + unsigned long afsr_reg, afar_reg; + unsigned long afsr, afar, error_bits; + int reported, portid; + + afsr_reg = reg_base + SYSIO_CE_AFSR; + afar_reg = reg_base + SYSIO_CE_AFAR; + + /* Latch error status. */ + afsr = upa_readq(afsr_reg); + afar = upa_readq(afar_reg); + + /* Clear primary/secondary error status bits. */ + error_bits = afsr & + (SYSIO_CEAFSR_PPIO | SYSIO_CEAFSR_PDRD | SYSIO_CEAFSR_PDWR | + SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR); + upa_writeq(error_bits, afsr_reg); + + portid = of_getintprop_default(op->dev.of_node, "portid", -1); + + printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n", + portid, + (((error_bits & SYSIO_CEAFSR_PPIO) ? + "PIO" : + ((error_bits & SYSIO_CEAFSR_PDRD) ? + "DVMA Read" : + ((error_bits & SYSIO_CEAFSR_PDWR) ? + "DVMA Write" : "???"))))); + + /* XXX Use syndrome and afar to print out module string just like + * XXX UDB CE trap handler does... -DaveM + */ + printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n", + portid, + (afsr & SYSIO_CEAFSR_DOFF) >> 45UL, + (afsr & SYSIO_CEAFSR_ESYND) >> 48UL, + (afsr & SYSIO_CEAFSR_SIZE) >> 42UL, + (afsr & SYSIO_CEAFSR_MID) >> 37UL); + printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); + + printk("SYSIO[%x]: Secondary CE errors [", portid); + reported = 0; + if (afsr & SYSIO_CEAFSR_SPIO) { + reported++; + printk("(PIO)"); + } + if (afsr & SYSIO_CEAFSR_SDRD) { + reported++; + printk("(DVMA Read)"); + } + if (afsr & SYSIO_CEAFSR_SDWR) { + reported++; + printk("(DVMA Write)"); + } + if (!reported) + printk("(none)"); + printk("]\n"); + + return IRQ_HANDLED; +} + +#define SYSIO_SBUS_AFSR 0x2010UL +#define SYSIO_SBUS_AFAR 0x2018UL +#define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */ +#define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */ +#define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */ +#define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */ +#define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */ +#define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */ +#define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */ +#define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */ +#define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */ +#define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */ +#define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */ +#define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */ +static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id) +{ + struct platform_device *op = dev_id; + struct iommu *iommu = op->dev.archdata.iommu; + unsigned long afsr_reg, afar_reg, reg_base; + unsigned long afsr, afar, error_bits; + int reported, portid; + + reg_base = iommu->write_complete_reg - 0x2000UL; + afsr_reg = reg_base + SYSIO_SBUS_AFSR; + afar_reg = reg_base + SYSIO_SBUS_AFAR; + + afsr = upa_readq(afsr_reg); + afar = upa_readq(afar_reg); + + /* Clear primary/secondary error status bits. */ + error_bits = afsr & + (SYSIO_SBAFSR_PLE | SYSIO_SBAFSR_PTO | SYSIO_SBAFSR_PBERR | + SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR); + upa_writeq(error_bits, afsr_reg); + + portid = of_getintprop_default(op->dev.of_node, "portid", -1); + + /* Log the error. */ + printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n", + portid, + (((error_bits & SYSIO_SBAFSR_PLE) ? + "Late PIO Error" : + ((error_bits & SYSIO_SBAFSR_PTO) ? + "Time Out" : + ((error_bits & SYSIO_SBAFSR_PBERR) ? + "Error Ack" : "???")))), + (afsr & SYSIO_SBAFSR_RD) ? 1 : 0); + printk("SYSIO[%x]: size[%lx] MID[%lx]\n", + portid, + (afsr & SYSIO_SBAFSR_SIZE) >> 42UL, + (afsr & SYSIO_SBAFSR_MID) >> 37UL); + printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); + printk("SYSIO[%x]: Secondary SBUS errors [", portid); + reported = 0; + if (afsr & SYSIO_SBAFSR_SLE) { + reported++; + printk("(Late PIO Error)"); + } + if (afsr & SYSIO_SBAFSR_STO) { + reported++; + printk("(Time Out)"); + } + if (afsr & SYSIO_SBAFSR_SBERR) { + reported++; + printk("(Error Ack)"); + } + if (!reported) + printk("(none)"); + printk("]\n"); + + /* XXX check iommu/strbuf for further error status XXX */ + + return IRQ_HANDLED; +} + +#define ECC_CONTROL 0x0020UL +#define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */ +#define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */ +#define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */ + +#define SYSIO_UE_INO 0x34 +#define SYSIO_CE_INO 0x35 +#define SYSIO_SBUSERR_INO 0x36 + +static void __init sysio_register_error_handlers(struct platform_device *op) +{ + struct iommu *iommu = op->dev.archdata.iommu; + unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; + unsigned int irq; + u64 control; + int portid; + + portid = of_getintprop_default(op->dev.of_node, "portid", -1); + + irq = sbus_build_irq(op, SYSIO_UE_INO); + if (request_irq(irq, sysio_ue_handler, 0, + "SYSIO_UE", op) < 0) { + prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n", + portid); + prom_halt(); + } + + irq = sbus_build_irq(op, SYSIO_CE_INO); + if (request_irq(irq, sysio_ce_handler, 0, + "SYSIO_CE", op) < 0) { + prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n", + portid); + prom_halt(); + } + + irq = sbus_build_irq(op, SYSIO_SBUSERR_INO); + if (request_irq(irq, sysio_sbus_error_handler, 0, + "SYSIO_SBERR", op) < 0) { + prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n", + portid); + prom_halt(); + } + + /* Now turn the error interrupts on and also enable ECC checking. */ + upa_writeq((SYSIO_ECNTRL_ECCEN | + SYSIO_ECNTRL_UEEN | + SYSIO_ECNTRL_CEEN), + reg_base + ECC_CONTROL); + + control = upa_readq(iommu->write_complete_reg); + control |= 0x100UL; /* SBUS Error Interrupt Enable */ + upa_writeq(control, iommu->write_complete_reg); +} + +/* Boot time initialization. */ +static void __init sbus_iommu_init(struct platform_device *op) +{ + const struct linux_prom64_registers *pr; + struct device_node *dp = op->dev.of_node; + struct iommu *iommu; + struct strbuf *strbuf; + unsigned long regs, reg_base; + int i, portid; + u64 control; + + pr = of_get_property(dp, "reg", NULL); + if (!pr) { + prom_printf("sbus_iommu_init: Cannot map SYSIO " + "control registers.\n"); + prom_halt(); + } + regs = pr->phys_addr; + + iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC); + strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC); + if (!iommu || !strbuf) + goto fatal_memory_error; + + op->dev.archdata.iommu = iommu; + op->dev.archdata.stc = strbuf; + op->dev.archdata.numa_node = NUMA_NO_NODE; + + reg_base = regs + SYSIO_IOMMUREG_BASE; + iommu->iommu_control = reg_base + IOMMU_CONTROL; + iommu->iommu_tsbbase = reg_base + IOMMU_TSBBASE; + iommu->iommu_flush = reg_base + IOMMU_FLUSH; + iommu->iommu_tags = iommu->iommu_control + + (IOMMU_TAGDIAG - IOMMU_CONTROL); + + reg_base = regs + SYSIO_STRBUFREG_BASE; + strbuf->strbuf_control = reg_base + STRBUF_CONTROL; + strbuf->strbuf_pflush = reg_base + STRBUF_PFLUSH; + strbuf->strbuf_fsync = reg_base + STRBUF_FSYNC; + + strbuf->strbuf_enabled = 1; + + strbuf->strbuf_flushflag = (volatile unsigned long *) + ((((unsigned long)&strbuf->__flushflag_buf[0]) + + 63UL) + & ~63UL); + strbuf->strbuf_flushflag_pa = (unsigned long) + __pa(strbuf->strbuf_flushflag); + + /* The SYSIO SBUS control register is used for dummy reads + * in order to ensure write completion. + */ + iommu->write_complete_reg = regs + 0x2000UL; + + portid = of_getintprop_default(op->dev.of_node, "portid", -1); + printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n", + portid, regs); + + /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */ + if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1)) + goto fatal_memory_error; + + control = upa_readq(iommu->iommu_control); + control = ((7UL << 16UL) | + (0UL << 2UL) | + (1UL << 1UL) | + (1UL << 0UL)); + upa_writeq(control, iommu->iommu_control); + + /* Clean out any cruft in the IOMMU using + * diagnostic accesses. + */ + for (i = 0; i < 16; i++) { + unsigned long dram, tag; + + dram = iommu->iommu_control + (IOMMU_DRAMDIAG - IOMMU_CONTROL); + tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL); + + dram += (unsigned long)i * 8UL; + tag += (unsigned long)i * 8UL; + upa_writeq(0, dram); + upa_writeq(0, tag); + } + upa_readq(iommu->write_complete_reg); + + /* Give the TSB to SYSIO. */ + upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase); + + /* Setup streaming buffer, DE=1 SB_EN=1 */ + control = (1UL << 1UL) | (1UL << 0UL); + upa_writeq(control, strbuf->strbuf_control); + + /* Clear out the tags using diagnostics. */ + for (i = 0; i < 16; i++) { + unsigned long ptag, ltag; + + ptag = strbuf->strbuf_control + + (STRBUF_PTAGDIAG - STRBUF_CONTROL); + ltag = strbuf->strbuf_control + + (STRBUF_LTAGDIAG - STRBUF_CONTROL); + ptag += (unsigned long)i * 8UL; + ltag += (unsigned long)i * 8UL; + + upa_writeq(0UL, ptag); + upa_writeq(0UL, ltag); + } + + /* Enable DVMA arbitration for all devices/slots. */ + control = upa_readq(iommu->write_complete_reg); + control |= 0x3fUL; + upa_writeq(control, iommu->write_complete_reg); + + /* Now some Xfire specific grot... */ + if (this_is_starfire) + starfire_hookup(portid); + + sysio_register_error_handlers(op); + return; + +fatal_memory_error: + kfree(iommu); + kfree(strbuf); + prom_printf("sbus_iommu_init: Fatal memory allocation error.\n"); +} + +static int __init sbus_init(void) +{ + struct device_node *dp; + + for_each_node_by_name(dp, "sbus") { + struct platform_device *op = of_find_device_by_node(dp); + + sbus_iommu_init(op); + of_propagate_archdata(op); + } + + return 0; +} + +subsys_initcall(sbus_init); -- cgit v1.2.3