From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Thu, 11 Apr 2024 10:27:49 +0200
Subject: Adding upstream version 6.6.15.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/x86/kernel/irqinit.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 arch/x86/kernel/irqinit.c

(limited to 'arch/x86/kernel/irqinit.c')

diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
new file mode 100644
index 0000000000..c683666876
--- /dev/null
+++ b/arch/x86/kernel/irqinit.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+#include <linux/random.h>
+#include <linux/kprobes.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/pgtable.h>
+
+#include <linux/atomic.h>
+#include <asm/timer.h>
+#include <asm/hw_irq.h>
+#include <asm/desc.h>
+#include <asm/io_apic.h>
+#include <asm/acpi.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/traps.h>
+#include <asm/prom.h>
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+	[0 ... NR_VECTORS - 1] = VECTOR_UNUSED,
+};
+
+void __init init_ISA_irqs(void)
+{
+	struct irq_chip *chip = legacy_pic->chip;
+	int i;
+
+	/*
+	 * Try to set up the through-local-APIC virtual wire mode earlier.
+	 *
+	 * On some 32-bit UP machines, whose APIC has been disabled by BIOS
+	 * and then got re-enabled by "lapic", it hangs at boot time without this.
+	 */
+	init_bsp_APIC();
+
+	legacy_pic->init(0);
+
+	for (i = 0; i < nr_legacy_irqs(); i++) {
+		irq_set_chip_and_handler(i, chip, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+}
+
+void __init init_IRQ(void)
+{
+	int i;
+
+	/*
+	 * On cpu 0, Assign ISA_IRQ_VECTOR(irq) to IRQ 0..15.
+	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
+	 * then this configuration will likely be static after the boot. If
+	 * these IRQs are handled by more modern controllers like IO-APIC,
+	 * then this vector space can be freed and re-used dynamically as the
+	 * irq's migrate etc.
+	 */
+	for (i = 0; i < nr_legacy_irqs(); i++)
+		per_cpu(vector_irq, 0)[ISA_IRQ_VECTOR(i)] = irq_to_desc(i);
+
+	BUG_ON(irq_init_percpu_irqstack(smp_processor_id()));
+
+	x86_init.irqs.intr_init();
+}
+
+void __init native_init_IRQ(void)
+{
+	/* Execute any quirks before the call gates are initialised: */
+	x86_init.irqs.pre_vector_init();
+
+	idt_setup_apic_and_irq_gates();
+	lapic_assign_system_vectors();
+
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) {
+		/* IRQ2 is cascade interrupt to second interrupt controller */
+		if (request_irq(2, no_action, IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("%s: request_irq() failed\n", "cascade");
+	}
+}
-- 
cgit v1.2.3