From 94ac2ab3fff96814d7460a27a0e9d004abbd4128 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 19 Jun 2024 23:00:37 +0200 Subject: Merging upstream version 6.9.2. Signed-off-by: Daniel Baumann --- block/blk-settings.c | 323 ++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 258 insertions(+), 65 deletions(-) (limited to 'block/blk-settings.c') diff --git a/block/blk-settings.c b/block/blk-settings.c index 5adadce08..9d6033e01 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -25,53 +25,22 @@ void blk_queue_rq_timeout(struct request_queue *q, unsigned int timeout) } EXPORT_SYMBOL_GPL(blk_queue_rq_timeout); -/** - * blk_set_default_limits - reset limits to default values - * @lim: the queue_limits structure to reset - * - * Description: - * Returns a queue_limit struct to its default state. - */ -void blk_set_default_limits(struct queue_limits *lim) -{ - lim->max_segments = BLK_MAX_SEGMENTS; - lim->max_discard_segments = 1; - lim->max_integrity_segments = 0; - lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; - lim->virt_boundary_mask = 0; - lim->max_segment_size = BLK_MAX_SEGMENT_SIZE; - lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS; - lim->max_user_sectors = lim->max_dev_sectors = 0; - lim->chunk_sectors = 0; - lim->max_write_zeroes_sectors = 0; - lim->max_zone_append_sectors = 0; - lim->max_discard_sectors = 0; - lim->max_hw_discard_sectors = 0; - lim->max_secure_erase_sectors = 0; - lim->discard_granularity = 512; - lim->discard_alignment = 0; - lim->discard_misaligned = 0; - lim->logical_block_size = lim->physical_block_size = lim->io_min = 512; - lim->bounce = BLK_BOUNCE_NONE; - lim->alignment_offset = 0; - lim->io_opt = 0; - lim->misaligned = 0; - lim->zoned = false; - lim->zone_write_granularity = 0; - lim->dma_alignment = 511; -} - /** * blk_set_stacking_limits - set default limits for stacking devices * @lim: the queue_limits structure to reset * - * Description: - * Returns a queue_limit struct to its default state. Should be used - * by stacking drivers like DM that have no internal limits. + * Prepare queue limits for applying limits from underlying devices using + * blk_stack_limits(). */ void blk_set_stacking_limits(struct queue_limits *lim) { - blk_set_default_limits(lim); + memset(lim, 0, sizeof(*lim)); + lim->logical_block_size = SECTOR_SIZE; + lim->physical_block_size = SECTOR_SIZE; + lim->io_min = SECTOR_SIZE; + lim->discard_granularity = SECTOR_SIZE; + lim->dma_alignment = SECTOR_SIZE - 1; + lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; /* Inherit limits from component devices */ lim->max_segments = USHRT_MAX; @@ -82,9 +51,237 @@ void blk_set_stacking_limits(struct queue_limits *lim) lim->max_dev_sectors = UINT_MAX; lim->max_write_zeroes_sectors = UINT_MAX; lim->max_zone_append_sectors = UINT_MAX; + lim->max_user_discard_sectors = UINT_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); +static void blk_apply_bdi_limits(struct backing_dev_info *bdi, + struct queue_limits *lim) +{ + /* + * For read-ahead of large files to be effective, we need to read ahead + * at least twice the optimal I/O size. + */ + bdi->ra_pages = max(lim->io_opt * 2 / PAGE_SIZE, VM_READAHEAD_PAGES); + bdi->io_pages = lim->max_sectors >> PAGE_SECTORS_SHIFT; +} + +static int blk_validate_zoned_limits(struct queue_limits *lim) +{ + if (!lim->zoned) { + if (WARN_ON_ONCE(lim->max_open_zones) || + WARN_ON_ONCE(lim->max_active_zones) || + WARN_ON_ONCE(lim->zone_write_granularity) || + WARN_ON_ONCE(lim->max_zone_append_sectors)) + return -EINVAL; + return 0; + } + + if (WARN_ON_ONCE(!IS_ENABLED(CONFIG_BLK_DEV_ZONED))) + return -EINVAL; + + if (lim->zone_write_granularity < lim->logical_block_size) + lim->zone_write_granularity = lim->logical_block_size; + + if (lim->max_zone_append_sectors) { + /* + * The Zone Append size is limited by the maximum I/O size + * and the zone size given that it can't span zones. + */ + lim->max_zone_append_sectors = + min3(lim->max_hw_sectors, + lim->max_zone_append_sectors, + lim->chunk_sectors); + } + + return 0; +} + +/* + * Check that the limits in lim are valid, initialize defaults for unset + * values, and cap values based on others where needed. + */ +static int blk_validate_limits(struct queue_limits *lim) +{ + unsigned int max_hw_sectors; + + /* + * Unless otherwise specified, default to 512 byte logical blocks and a + * physical block size equal to the logical block size. + */ + if (!lim->logical_block_size) + lim->logical_block_size = SECTOR_SIZE; + if (lim->physical_block_size < lim->logical_block_size) + lim->physical_block_size = lim->logical_block_size; + + /* + * The minimum I/O size defaults to the physical block size unless + * explicitly overridden. + */ + if (lim->io_min < lim->physical_block_size) + lim->io_min = lim->physical_block_size; + + /* + * max_hw_sectors has a somewhat weird default for historical reason, + * but driver really should set their own instead of relying on this + * value. + * + * The block layer relies on the fact that every driver can + * handle at lest a page worth of data per I/O, and needs the value + * aligned to the logical block size. + */ + if (!lim->max_hw_sectors) + lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS; + if (WARN_ON_ONCE(lim->max_hw_sectors < PAGE_SECTORS)) + return -EINVAL; + lim->max_hw_sectors = round_down(lim->max_hw_sectors, + lim->logical_block_size >> SECTOR_SHIFT); + + /* + * The actual max_sectors value is a complex beast and also takes the + * max_dev_sectors value (set by SCSI ULPs) and a user configurable + * value into account. The ->max_sectors value is always calculated + * from these, so directly setting it won't have any effect. + */ + max_hw_sectors = min_not_zero(lim->max_hw_sectors, + lim->max_dev_sectors); + if (lim->max_user_sectors) { + if (lim->max_user_sectors < PAGE_SIZE / SECTOR_SIZE) + return -EINVAL; + lim->max_sectors = min(max_hw_sectors, lim->max_user_sectors); + } else { + lim->max_sectors = min(max_hw_sectors, BLK_DEF_MAX_SECTORS_CAP); + } + lim->max_sectors = round_down(lim->max_sectors, + lim->logical_block_size >> SECTOR_SHIFT); + + /* + * Random default for the maximum number of segments. Driver should not + * rely on this and set their own. + */ + if (!lim->max_segments) + lim->max_segments = BLK_MAX_SEGMENTS; + + lim->max_discard_sectors = + min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors); + + if (!lim->max_discard_segments) + lim->max_discard_segments = 1; + + if (lim->discard_granularity < lim->physical_block_size) + lim->discard_granularity = lim->physical_block_size; + + /* + * By default there is no limit on the segment boundary alignment, + * but if there is one it can't be smaller than the page size as + * that would break all the normal I/O patterns. + */ + if (!lim->seg_boundary_mask) + lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; + if (WARN_ON_ONCE(lim->seg_boundary_mask < PAGE_SIZE - 1)) + return -EINVAL; + + /* + * Stacking device may have both virtual boundary and max segment + * size limit, so allow this setting now, and long-term the two + * might need to move out of stacking limits since we have immutable + * bvec and lower layer bio splitting is supposed to handle the two + * correctly. + */ + if (lim->virt_boundary_mask) { + if (!lim->max_segment_size) + lim->max_segment_size = UINT_MAX; + } else { + /* + * The maximum segment size has an odd historic 64k default that + * drivers probably should override. Just like the I/O size we + * require drivers to at least handle a full page per segment. + */ + if (!lim->max_segment_size) + lim->max_segment_size = BLK_MAX_SEGMENT_SIZE; + if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE)) + return -EINVAL; + } + + /* + * We require drivers to at least do logical block aligned I/O, but + * historically could not check for that due to the separate calls + * to set the limits. Once the transition is finished the check + * below should be narrowed down to check the logical block size. + */ + if (!lim->dma_alignment) + lim->dma_alignment = SECTOR_SIZE - 1; + if (WARN_ON_ONCE(lim->dma_alignment > PAGE_SIZE)) + return -EINVAL; + + if (lim->alignment_offset) { + lim->alignment_offset &= (lim->physical_block_size - 1); + lim->misaligned = 0; + } + + return blk_validate_zoned_limits(lim); +} + +/* + * Set the default limits for a newly allocated queue. @lim contains the + * initial limits set by the driver, which could be no limit in which case + * all fields are cleared to zero. + */ +int blk_set_default_limits(struct queue_limits *lim) +{ + /* + * Most defaults are set by capping the bounds in blk_validate_limits, + * but max_user_discard_sectors is special and needs an explicit + * initialization to the max value here. + */ + lim->max_user_discard_sectors = UINT_MAX; + return blk_validate_limits(lim); +} + +/** + * queue_limits_commit_update - commit an atomic update of queue limits + * @q: queue to update + * @lim: limits to apply + * + * Apply the limits in @lim that were obtained from queue_limits_start_update() + * and updated by the caller to @q. + * + * Returns 0 if successful, else a negative error code. + */ +int queue_limits_commit_update(struct request_queue *q, + struct queue_limits *lim) + __releases(q->limits_lock) +{ + int error = blk_validate_limits(lim); + + if (!error) { + q->limits = *lim; + if (q->disk) + blk_apply_bdi_limits(q->disk->bdi, lim); + } + mutex_unlock(&q->limits_lock); + return error; +} +EXPORT_SYMBOL_GPL(queue_limits_commit_update); + +/** + * queue_limits_set - apply queue limits to queue + * @q: queue to update + * @lim: limits to apply + * + * Apply the limits in @lim that were freshly initialized to @q. + * To update existing limits use queue_limits_start_update() and + * queue_limits_commit_update() instead. + * + * Returns 0 if successful, else a negative error code. + */ +int queue_limits_set(struct request_queue *q, struct queue_limits *lim) +{ + mutex_lock(&q->limits_lock); + return queue_limits_commit_update(q, lim); +} +EXPORT_SYMBOL_GPL(queue_limits_set); + /** * blk_queue_bounce_limit - set bounce buffer limit for queue * @q: the request queue for the device @@ -177,8 +374,11 @@ EXPORT_SYMBOL(blk_queue_chunk_sectors); void blk_queue_max_discard_sectors(struct request_queue *q, unsigned int max_discard_sectors) { - q->limits.max_hw_discard_sectors = max_discard_sectors; - q->limits.max_discard_sectors = max_discard_sectors; + struct queue_limits *lim = &q->limits; + + lim->max_hw_discard_sectors = max_discard_sectors; + lim->max_discard_sectors = + min(max_discard_sectors, lim->max_user_discard_sectors); } EXPORT_SYMBOL(blk_queue_max_discard_sectors); @@ -393,15 +593,7 @@ EXPORT_SYMBOL(blk_queue_alignment_offset); void disk_update_readahead(struct gendisk *disk) { - struct request_queue *q = disk->queue; - - /* - * For read-ahead of large files to be effective, we need to read ahead - * at least twice the optimal I/O size. - */ - disk->bdi->ra_pages = - max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES); - disk->bdi->io_pages = queue_max_sectors(q) >> (PAGE_SHIFT - 9); + blk_apply_bdi_limits(disk->bdi, &disk->queue->limits); } EXPORT_SYMBOL_GPL(disk_update_readahead); @@ -698,28 +890,29 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, EXPORT_SYMBOL(blk_stack_limits); /** - * disk_stack_limits - adjust queue limits for stacked drivers - * @disk: MD/DM gendisk (top) + * queue_limits_stack_bdev - adjust queue_limits for stacked devices + * @t: the stacking driver limits (top device) * @bdev: the underlying block device (bottom) * @offset: offset to beginning of data within component device + * @pfx: prefix to use for warnings logged * * Description: - * Merges the limits for a top level gendisk and a bottom level - * block_device. + * This function is used by stacking drivers like MD and DM to ensure + * that all component devices have compatible block sizes and + * alignments. The stacking driver must provide a queue_limits + * struct (top) and then iteratively call the stacking function for + * all component (bottom) devices. The stacking function will + * attempt to combine the values and ensure proper alignment. */ -void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, - sector_t offset) +void queue_limits_stack_bdev(struct queue_limits *t, struct block_device *bdev, + sector_t offset, const char *pfx) { - struct request_queue *t = disk->queue; - - if (blk_stack_limits(&t->limits, &bdev_get_queue(bdev)->limits, - get_start_sect(bdev) + (offset >> 9)) < 0) + if (blk_stack_limits(t, &bdev_get_queue(bdev)->limits, + get_start_sect(bdev) + offset)) pr_notice("%s: Warning: Device %pg is misaligned\n", - disk->disk_name, bdev); - - disk_update_readahead(disk); + pfx, bdev); } -EXPORT_SYMBOL(disk_stack_limits); +EXPORT_SYMBOL_GPL(queue_limits_stack_bdev); /** * blk_queue_update_dma_pad - update pad mask -- cgit v1.2.3