From 27d3313807296c3943a96ceef8c2b7279cb56962 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:39:59 +0200 Subject: Adding debian version 6.7.7-1. Signed-off-by: Daniel Baumann --- .../0006-serial-8250-Use-port-lock-wrappers.patch | 465 --------------------- 1 file changed, 465 deletions(-) delete mode 100644 debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch (limited to 'debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch') diff --git a/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch b/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch deleted file mode 100644 index d6ee818bf9..0000000000 --- a/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch +++ /dev/null @@ -1,465 +0,0 @@ -From: Thomas Gleixner -Date: Thu, 14 Sep 2023 20:43:23 +0206 -Subject: [PATCH 006/134] serial: 8250: Use port lock wrappers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz - -When a serial port is used for kernel console output, then all -modifications to the UART registers which are done from other contexts, -e.g. getty, termios, are interference points for the kernel console. - -So far this has been ignored and the printk output is based on the -principle of hope. The rework of the console infrastructure which aims to -support threaded and atomic consoles, requires to mark sections which -modify the UART registers as unsafe. This allows the atomic write function -to make informed decisions and eventually to restore operational state. It -also allows to prevent the regular UART code from modifying UART registers -while printk output is in progress. - -All modifications of UART registers are guarded by the UART port lock, -which provides an obvious synchronization point with the console -infrastructure. - -To avoid adding this functionality to all UART drivers, wrap the -spin_[un]lock*() invocations for uart_port::lock into helper functions -which just contain the spin_[un]lock*() invocations for now. In a -subsequent step these helpers will gain the console synchronization -mechanisms. - -Converted with coccinelle. No functional change. - -Signed-off-by: Thomas Gleixner -Reviewed-by: Ilpo Järvinen -Signed-off-by: John Ogness -Link: https://lore.kernel.org/r/20230914183831.587273-7-john.ogness@linutronix.de -Signed-off-by: Greg Kroah-Hartman -Signed-off-by: Sebastian Andrzej Siewior ---- - drivers/tty/serial/8250/8250_core.c | 12 ++-- - drivers/tty/serial/8250/8250_port.c | 100 ++++++++++++++++++------------------ - 2 files changed, 56 insertions(+), 56 deletions(-) - ---- a/drivers/tty/serial/8250/8250_core.c -+++ b/drivers/tty/serial/8250/8250_core.c -@@ -259,7 +259,7 @@ static void serial8250_backup_timeout(st - unsigned int iir, ier = 0, lsr; - unsigned long flags; - -- spin_lock_irqsave(&up->port.lock, flags); -+ uart_port_lock_irqsave(&up->port, &flags); - - /* - * Must disable interrupts or else we risk racing with the interrupt -@@ -292,7 +292,7 @@ static void serial8250_backup_timeout(st - if (up->port.irq) - serial_out(up, UART_IER, ier); - -- spin_unlock_irqrestore(&up->port.lock, flags); -+ uart_port_unlock_irqrestore(&up->port, flags); - - /* Standard timer interval plus 0.2s to keep the port running */ - mod_timer(&up->timer, -@@ -992,11 +992,11 @@ static void serial_8250_overrun_backoff_ - struct uart_port *port = &up->port; - unsigned long flags; - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - up->ier |= UART_IER_RLSI | UART_IER_RDI; - up->port.read_status_mask |= UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - } - - /** -@@ -1194,9 +1194,9 @@ void serial8250_unregister_port(int line - if (uart->em485) { - unsigned long flags; - -- spin_lock_irqsave(&uart->port.lock, flags); -+ uart_port_lock_irqsave(&uart->port, &flags); - serial8250_em485_destroy(uart); -- spin_unlock_irqrestore(&uart->port.lock, flags); -+ uart_port_unlock_irqrestore(&uart->port, flags); - } - - uart_remove_one_port(&serial8250_reg, &uart->port); ---- a/drivers/tty/serial/8250/8250_port.c -+++ b/drivers/tty/serial/8250/8250_port.c -@@ -689,7 +689,7 @@ static void serial8250_set_sleep(struct - - if (p->capabilities & UART_CAP_SLEEP) { - /* Synchronize UART_IER access against the console. */ -- spin_lock_irq(&p->port.lock); -+ uart_port_lock_irq(&p->port); - if (p->capabilities & UART_CAP_EFR) { - lcr = serial_in(p, UART_LCR); - efr = serial_in(p, UART_EFR); -@@ -703,7 +703,7 @@ static void serial8250_set_sleep(struct - serial_out(p, UART_EFR, efr); - serial_out(p, UART_LCR, lcr); - } -- spin_unlock_irq(&p->port.lock); -+ uart_port_unlock_irq(&p->port); - } - - serial8250_rpm_put(p); -@@ -746,9 +746,9 @@ static void enable_rsa(struct uart_8250_ - { - if (up->port.type == PORT_RSA) { - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { -- spin_lock_irq(&up->port.lock); -+ uart_port_lock_irq(&up->port); - __enable_rsa(up); -- spin_unlock_irq(&up->port.lock); -+ uart_port_unlock_irq(&up->port); - } - if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) - serial_out(up, UART_RSA_FRR, 0); -@@ -768,7 +768,7 @@ static void disable_rsa(struct uart_8250 - - if (up->port.type == PORT_RSA && - up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { -- spin_lock_irq(&up->port.lock); -+ uart_port_lock_irq(&up->port); - - mode = serial_in(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); -@@ -781,7 +781,7 @@ static void disable_rsa(struct uart_8250 - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; -- spin_unlock_irq(&up->port.lock); -+ uart_port_unlock_irq(&up->port); - } - } - #endif /* CONFIG_SERIAL_8250_RSA */ -@@ -1172,7 +1172,7 @@ static void autoconfig(struct uart_8250_ - * - * Synchronize UART_IER access against the console. - */ -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - up->capabilities = 0; - up->bugs = 0; -@@ -1211,7 +1211,7 @@ static void autoconfig(struct uart_8250_ - /* - * We failed; there's nothing here - */ -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", - scratch2, scratch3); - goto out; -@@ -1235,7 +1235,7 @@ static void autoconfig(struct uart_8250_ - status1 = serial_in(up, UART_MSR) & UART_MSR_STATUS_BITS; - serial8250_out_MCR(up, save_mcr); - if (status1 != (UART_MSR_DCD | UART_MSR_CTS)) { -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - DEBUG_AUTOCONF("LOOP test failed (%02x) ", - status1); - goto out; -@@ -1304,7 +1304,7 @@ static void autoconfig(struct uart_8250_ - serial8250_clear_IER(up); - - out_unlock: -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - /* - * Check if the device is a Fintek F81216A -@@ -1344,9 +1344,9 @@ static void autoconfig_irq(struct uart_8 - probe_irq_off(probe_irq_on()); - save_mcr = serial8250_in_MCR(up); - /* Synchronize UART_IER access against the console. */ -- spin_lock_irq(&port->lock); -+ uart_port_lock_irq(port); - save_ier = serial_in(up, UART_IER); -- spin_unlock_irq(&port->lock); -+ uart_port_unlock_irq(port); - serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2); - - irqs = probe_irq_on(); -@@ -1359,9 +1359,9 @@ static void autoconfig_irq(struct uart_8 - UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); - } - /* Synchronize UART_IER access against the console. */ -- spin_lock_irq(&port->lock); -+ uart_port_lock_irq(port); - serial_out(up, UART_IER, UART_IER_ALL_INTR); -- spin_unlock_irq(&port->lock); -+ uart_port_unlock_irq(port); - serial_in(up, UART_LSR); - serial_in(up, UART_RX); - serial_in(up, UART_IIR); -@@ -1372,9 +1372,9 @@ static void autoconfig_irq(struct uart_8 - - serial8250_out_MCR(up, save_mcr); - /* Synchronize UART_IER access against the console. */ -- spin_lock_irq(&port->lock); -+ uart_port_lock_irq(port); - serial_out(up, UART_IER, save_ier); -- spin_unlock_irq(&port->lock); -+ uart_port_unlock_irq(port); - - if (port->flags & UPF_FOURPORT) - outb_p(save_ICP, ICP); -@@ -1442,13 +1442,13 @@ static enum hrtimer_restart serial8250_e - unsigned long flags; - - serial8250_rpm_get(p); -- spin_lock_irqsave(&p->port.lock, flags); -+ uart_port_lock_irqsave(&p->port, &flags); - if (em485->active_timer == &em485->stop_tx_timer) { - p->rs485_stop_tx(p); - em485->active_timer = NULL; - em485->tx_stopped = true; - } -- spin_unlock_irqrestore(&p->port.lock, flags); -+ uart_port_unlock_irqrestore(&p->port, flags); - serial8250_rpm_put(p); - - return HRTIMER_NORESTART; -@@ -1630,12 +1630,12 @@ static enum hrtimer_restart serial8250_e - struct uart_8250_port *p = em485->port; - unsigned long flags; - -- spin_lock_irqsave(&p->port.lock, flags); -+ uart_port_lock_irqsave(&p->port, &flags); - if (em485->active_timer == &em485->start_tx_timer) { - __start_tx(&p->port); - em485->active_timer = NULL; - } -- spin_unlock_irqrestore(&p->port.lock, flags); -+ uart_port_unlock_irqrestore(&p->port, flags); - - return HRTIMER_NORESTART; - } -@@ -1918,7 +1918,7 @@ int serial8250_handle_irq(struct uart_po - if (iir & UART_IIR_NO_INT) - return 0; - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - status = serial_lsr_in(up); - -@@ -1988,9 +1988,9 @@ static int serial8250_tx_threshold_handl - if ((iir & UART_IIR_ID) == UART_IIR_THRI) { - struct uart_8250_port *up = up_to_u8250p(port); - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - serial8250_tx_chars(up); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - } - - iir = serial_port_in(port, UART_IIR); -@@ -2005,10 +2005,10 @@ static unsigned int serial8250_tx_empty( - - serial8250_rpm_get(up); - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - if (!serial8250_tx_dma_running(up) && uart_lsr_tx_empty(serial_lsr_in(up))) - result = TIOCSER_TEMT; -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - serial8250_rpm_put(up); - -@@ -2070,13 +2070,13 @@ static void serial8250_break_ctl(struct - unsigned long flags; - - serial8250_rpm_get(up); -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_port_out(port, UART_LCR, up->lcr); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - serial8250_rpm_put(up); - } - -@@ -2211,7 +2211,7 @@ int serial8250_do_startup(struct uart_po - * - * Synchronize UART_IER access against the console. - */ -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - up->acr = 0; - serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); - serial_port_out(port, UART_EFR, UART_EFR_ECB); -@@ -2221,7 +2221,7 @@ int serial8250_do_startup(struct uart_po - serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); - serial_port_out(port, UART_EFR, UART_EFR_ECB); - serial_port_out(port, UART_LCR, 0); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - } - - if (port->type == PORT_DA830) { -@@ -2230,10 +2230,10 @@ int serial8250_do_startup(struct uart_po - * - * Synchronize UART_IER access against the console. - */ -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - serial_port_out(port, UART_IER, 0); - serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - mdelay(10); - - /* Enable Tx, Rx and free run mode */ -@@ -2347,7 +2347,7 @@ int serial8250_do_startup(struct uart_po - * - * Synchronize UART_IER access against the console. - */ -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - wait_for_xmitr(up, UART_LSR_THRE); - serial_port_out_sync(port, UART_IER, UART_IER_THRI); -@@ -2359,7 +2359,7 @@ int serial8250_do_startup(struct uart_po - iir = serial_port_in(port, UART_IIR); - serial_port_out(port, UART_IER, 0); - -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - if (port->irqflags & IRQF_SHARED) - enable_irq(port->irq); -@@ -2382,7 +2382,7 @@ int serial8250_do_startup(struct uart_po - */ - serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - if (up->port.flags & UPF_FOURPORT) { - if (!up->port.irq) - up->port.mctrl |= TIOCM_OUT1; -@@ -2428,7 +2428,7 @@ int serial8250_do_startup(struct uart_po - } - - dont_test_tx_en: -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - /* - * Clear the interrupt registers again for luck, and clear the -@@ -2499,17 +2499,17 @@ void serial8250_do_shutdown(struct uart_ - * - * Synchronize UART_IER access against the console. - */ -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - up->ier = 0; - serial_port_out(port, UART_IER, 0); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - synchronize_irq(port->irq); - - if (up->dma) - serial8250_release_dma(up); - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - if (port->flags & UPF_FOURPORT) { - /* reset interrupts on the AST Fourport board */ - inb((port->iobase & 0xfe0) | 0x1f); -@@ -2518,7 +2518,7 @@ void serial8250_do_shutdown(struct uart_ - port->mctrl &= ~TIOCM_OUT2; - - serial8250_set_mctrl(port, port->mctrl); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - /* - * Disable break condition and FIFOs -@@ -2754,14 +2754,14 @@ void serial8250_update_uartclk(struct ua - quot = serial8250_get_divisor(port, baud, &frac); - - serial8250_rpm_get(up); -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - uart_update_timeout(port, termios->c_cflag, baud); - - serial8250_set_divisor(port, baud, quot, frac); - serial_port_out(port, UART_LCR, up->lcr); - -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - serial8250_rpm_put(up); - - out_unlock: -@@ -2798,7 +2798,7 @@ serial8250_do_set_termios(struct uart_po - * Synchronize UART_IER access against the console. - */ - serial8250_rpm_get(up); -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - up->lcr = cval; /* Save computed LCR */ - -@@ -2901,7 +2901,7 @@ serial8250_do_set_termios(struct uart_po - serial_port_out(port, UART_FCR, up->fcr); /* set fcr */ - } - serial8250_set_mctrl(port, port->mctrl); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - serial8250_rpm_put(up); - - /* Don't rewrite B0 */ -@@ -2924,15 +2924,15 @@ void serial8250_do_set_ldisc(struct uart - { - if (termios->c_line == N_PPS) { - port->flags |= UPF_HARDPPS_CD; -- spin_lock_irq(&port->lock); -+ uart_port_lock_irq(port); - serial8250_enable_ms(port); -- spin_unlock_irq(&port->lock); -+ uart_port_unlock_irq(port); - } else { - port->flags &= ~UPF_HARDPPS_CD; - if (!UART_ENABLE_MS(port, termios->c_cflag)) { -- spin_lock_irq(&port->lock); -+ uart_port_lock_irq(port); - serial8250_disable_ms(port); -- spin_unlock_irq(&port->lock); -+ uart_port_unlock_irq(port); - } - } - } -@@ -3406,9 +3406,9 @@ void serial8250_console_write(struct uar - touch_nmi_watchdog(); - - if (oops_in_progress) -- locked = spin_trylock_irqsave(&port->lock, flags); -+ locked = uart_port_trylock_irqsave(port, &flags); - else -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - /* - * First save the IER then disable the interrupts -@@ -3478,7 +3478,7 @@ void serial8250_console_write(struct uar - serial8250_modem_status(up); - - if (locked) -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - } - - static unsigned int probe_baud(struct uart_port *port) -- cgit v1.2.3