From 3565071f226432336a54d0193d729fa4508a3394 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:28:00 +0200 Subject: Adding debian version 6.6.15-2. Signed-off-by: Daniel Baumann --- .../0006-serial-8250-Use-port-lock-wrappers.patch | 465 +++++++++++++++++++++ 1 file changed, 465 insertions(+) create mode 100644 debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch (limited to 'debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch') diff --git a/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch b/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch new file mode 100644 index 0000000000..d6ee818bf9 --- /dev/null +++ b/debian/patches-rt/0006-serial-8250-Use-port-lock-wrappers.patch @@ -0,0 +1,465 @@ +From: Thomas Gleixner +Date: Thu, 14 Sep 2023 20:43:23 +0206 +Subject: [PATCH 006/134] serial: 8250: Use port lock wrappers +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz + +When a serial port is used for kernel console output, then all +modifications to the UART registers which are done from other contexts, +e.g. getty, termios, are interference points for the kernel console. + +So far this has been ignored and the printk output is based on the +principle of hope. The rework of the console infrastructure which aims to +support threaded and atomic consoles, requires to mark sections which +modify the UART registers as unsafe. This allows the atomic write function +to make informed decisions and eventually to restore operational state. It +also allows to prevent the regular UART code from modifying UART registers +while printk output is in progress. + +All modifications of UART registers are guarded by the UART port lock, +which provides an obvious synchronization point with the console +infrastructure. + +To avoid adding this functionality to all UART drivers, wrap the +spin_[un]lock*() invocations for uart_port::lock into helper functions +which just contain the spin_[un]lock*() invocations for now. In a +subsequent step these helpers will gain the console synchronization +mechanisms. + +Converted with coccinelle. No functional change. + +Signed-off-by: Thomas Gleixner +Reviewed-by: Ilpo Järvinen +Signed-off-by: John Ogness +Link: https://lore.kernel.org/r/20230914183831.587273-7-john.ogness@linutronix.de +Signed-off-by: Greg Kroah-Hartman +Signed-off-by: Sebastian Andrzej Siewior +--- + drivers/tty/serial/8250/8250_core.c | 12 ++-- + drivers/tty/serial/8250/8250_port.c | 100 ++++++++++++++++++------------------ + 2 files changed, 56 insertions(+), 56 deletions(-) + +--- a/drivers/tty/serial/8250/8250_core.c ++++ b/drivers/tty/serial/8250/8250_core.c +@@ -259,7 +259,7 @@ static void serial8250_backup_timeout(st + unsigned int iir, ier = 0, lsr; + unsigned long flags; + +- spin_lock_irqsave(&up->port.lock, flags); ++ uart_port_lock_irqsave(&up->port, &flags); + + /* + * Must disable interrupts or else we risk racing with the interrupt +@@ -292,7 +292,7 @@ static void serial8250_backup_timeout(st + if (up->port.irq) + serial_out(up, UART_IER, ier); + +- spin_unlock_irqrestore(&up->port.lock, flags); ++ uart_port_unlock_irqrestore(&up->port, flags); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, +@@ -992,11 +992,11 @@ static void serial_8250_overrun_backoff_ + struct uart_port *port = &up->port; + unsigned long flags; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + up->port.read_status_mask |= UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + /** +@@ -1194,9 +1194,9 @@ void serial8250_unregister_port(int line + if (uart->em485) { + unsigned long flags; + +- spin_lock_irqsave(&uart->port.lock, flags); ++ uart_port_lock_irqsave(&uart->port, &flags); + serial8250_em485_destroy(uart); +- spin_unlock_irqrestore(&uart->port.lock, flags); ++ uart_port_unlock_irqrestore(&uart->port, flags); + } + + uart_remove_one_port(&serial8250_reg, &uart->port); +--- a/drivers/tty/serial/8250/8250_port.c ++++ b/drivers/tty/serial/8250/8250_port.c +@@ -689,7 +689,7 @@ static void serial8250_set_sleep(struct + + if (p->capabilities & UART_CAP_SLEEP) { + /* Synchronize UART_IER access against the console. */ +- spin_lock_irq(&p->port.lock); ++ uart_port_lock_irq(&p->port); + if (p->capabilities & UART_CAP_EFR) { + lcr = serial_in(p, UART_LCR); + efr = serial_in(p, UART_EFR); +@@ -703,7 +703,7 @@ static void serial8250_set_sleep(struct + serial_out(p, UART_EFR, efr); + serial_out(p, UART_LCR, lcr); + } +- spin_unlock_irq(&p->port.lock); ++ uart_port_unlock_irq(&p->port); + } + + serial8250_rpm_put(p); +@@ -746,9 +746,9 @@ static void enable_rsa(struct uart_8250_ + { + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { +- spin_lock_irq(&up->port.lock); ++ uart_port_lock_irq(&up->port); + __enable_rsa(up); +- spin_unlock_irq(&up->port.lock); ++ uart_port_unlock_irq(&up->port); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_out(up, UART_RSA_FRR, 0); +@@ -768,7 +768,7 @@ static void disable_rsa(struct uart_8250 + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { +- spin_lock_irq(&up->port.lock); ++ uart_port_lock_irq(&up->port); + + mode = serial_in(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); +@@ -781,7 +781,7 @@ static void disable_rsa(struct uart_8250 + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; +- spin_unlock_irq(&up->port.lock); ++ uart_port_unlock_irq(&up->port); + } + } + #endif /* CONFIG_SERIAL_8250_RSA */ +@@ -1172,7 +1172,7 @@ static void autoconfig(struct uart_8250_ + * + * Synchronize UART_IER access against the console. + */ +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + up->capabilities = 0; + up->bugs = 0; +@@ -1211,7 +1211,7 @@ static void autoconfig(struct uart_8250_ + /* + * We failed; there's nothing here + */ +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; +@@ -1235,7 +1235,7 @@ static void autoconfig(struct uart_8250_ + status1 = serial_in(up, UART_MSR) & UART_MSR_STATUS_BITS; + serial8250_out_MCR(up, save_mcr); + if (status1 != (UART_MSR_DCD | UART_MSR_CTS)) { +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; +@@ -1304,7 +1304,7 @@ static void autoconfig(struct uart_8250_ + serial8250_clear_IER(up); + + out_unlock: +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + /* + * Check if the device is a Fintek F81216A +@@ -1344,9 +1344,9 @@ static void autoconfig_irq(struct uart_8 + probe_irq_off(probe_irq_on()); + save_mcr = serial8250_in_MCR(up); + /* Synchronize UART_IER access against the console. */ +- spin_lock_irq(&port->lock); ++ uart_port_lock_irq(port); + save_ier = serial_in(up, UART_IER); +- spin_unlock_irq(&port->lock); ++ uart_port_unlock_irq(port); + serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); +@@ -1359,9 +1359,9 @@ static void autoconfig_irq(struct uart_8 + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + /* Synchronize UART_IER access against the console. */ +- spin_lock_irq(&port->lock); ++ uart_port_lock_irq(port); + serial_out(up, UART_IER, UART_IER_ALL_INTR); +- spin_unlock_irq(&port->lock); ++ uart_port_unlock_irq(port); + serial_in(up, UART_LSR); + serial_in(up, UART_RX); + serial_in(up, UART_IIR); +@@ -1372,9 +1372,9 @@ static void autoconfig_irq(struct uart_8 + + serial8250_out_MCR(up, save_mcr); + /* Synchronize UART_IER access against the console. */ +- spin_lock_irq(&port->lock); ++ uart_port_lock_irq(port); + serial_out(up, UART_IER, save_ier); +- spin_unlock_irq(&port->lock); ++ uart_port_unlock_irq(port); + + if (port->flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); +@@ -1442,13 +1442,13 @@ static enum hrtimer_restart serial8250_e + unsigned long flags; + + serial8250_rpm_get(p); +- spin_lock_irqsave(&p->port.lock, flags); ++ uart_port_lock_irqsave(&p->port, &flags); + if (em485->active_timer == &em485->stop_tx_timer) { + p->rs485_stop_tx(p); + em485->active_timer = NULL; + em485->tx_stopped = true; + } +- spin_unlock_irqrestore(&p->port.lock, flags); ++ uart_port_unlock_irqrestore(&p->port, flags); + serial8250_rpm_put(p); + + return HRTIMER_NORESTART; +@@ -1630,12 +1630,12 @@ static enum hrtimer_restart serial8250_e + struct uart_8250_port *p = em485->port; + unsigned long flags; + +- spin_lock_irqsave(&p->port.lock, flags); ++ uart_port_lock_irqsave(&p->port, &flags); + if (em485->active_timer == &em485->start_tx_timer) { + __start_tx(&p->port); + em485->active_timer = NULL; + } +- spin_unlock_irqrestore(&p->port.lock, flags); ++ uart_port_unlock_irqrestore(&p->port, flags); + + return HRTIMER_NORESTART; + } +@@ -1918,7 +1918,7 @@ int serial8250_handle_irq(struct uart_po + if (iir & UART_IIR_NO_INT) + return 0; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + status = serial_lsr_in(up); + +@@ -1988,9 +1988,9 @@ static int serial8250_tx_threshold_handl + if ((iir & UART_IIR_ID) == UART_IIR_THRI) { + struct uart_8250_port *up = up_to_u8250p(port); + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + serial8250_tx_chars(up); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + iir = serial_port_in(port, UART_IIR); +@@ -2005,10 +2005,10 @@ static unsigned int serial8250_tx_empty( + + serial8250_rpm_get(up); + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + if (!serial8250_tx_dma_running(up) && uart_lsr_tx_empty(serial_lsr_in(up))) + result = TIOCSER_TEMT; +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + serial8250_rpm_put(up); + +@@ -2070,13 +2070,13 @@ static void serial8250_break_ctl(struct + unsigned long flags; + + serial8250_rpm_get(up); +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_port_out(port, UART_LCR, up->lcr); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + serial8250_rpm_put(up); + } + +@@ -2211,7 +2211,7 @@ int serial8250_do_startup(struct uart_po + * + * Synchronize UART_IER access against the console. + */ +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + up->acr = 0; + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); +@@ -2221,7 +2221,7 @@ int serial8250_do_startup(struct uart_po + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_LCR, 0); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + if (port->type == PORT_DA830) { +@@ -2230,10 +2230,10 @@ int serial8250_do_startup(struct uart_po + * + * Synchronize UART_IER access against the console. + */ +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + mdelay(10); + + /* Enable Tx, Rx and free run mode */ +@@ -2347,7 +2347,7 @@ int serial8250_do_startup(struct uart_po + * + * Synchronize UART_IER access against the console. + */ +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); +@@ -2359,7 +2359,7 @@ int serial8250_do_startup(struct uart_po + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + if (port->irqflags & IRQF_SHARED) + enable_irq(port->irq); +@@ -2382,7 +2382,7 @@ int serial8250_do_startup(struct uart_po + */ + serial_port_out(port, UART_LCR, UART_LCR_WLEN8); + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + if (up->port.flags & UPF_FOURPORT) { + if (!up->port.irq) + up->port.mctrl |= TIOCM_OUT1; +@@ -2428,7 +2428,7 @@ int serial8250_do_startup(struct uart_po + } + + dont_test_tx_en: +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + /* + * Clear the interrupt registers again for luck, and clear the +@@ -2499,17 +2499,17 @@ void serial8250_do_shutdown(struct uart_ + * + * Synchronize UART_IER access against the console. + */ +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + up->ier = 0; + serial_port_out(port, UART_IER, 0); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + synchronize_irq(port->irq); + + if (up->dma) + serial8250_release_dma(up); + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + if (port->flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((port->iobase & 0xfe0) | 0x1f); +@@ -2518,7 +2518,7 @@ void serial8250_do_shutdown(struct uart_ + port->mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(port, port->mctrl); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + /* + * Disable break condition and FIFOs +@@ -2754,14 +2754,14 @@ void serial8250_update_uartclk(struct ua + quot = serial8250_get_divisor(port, baud, &frac); + + serial8250_rpm_get(up); +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + serial8250_rpm_put(up); + + out_unlock: +@@ -2798,7 +2798,7 @@ serial8250_do_set_termios(struct uart_po + * Synchronize UART_IER access against the console. + */ + serial8250_rpm_get(up); +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + up->lcr = cval; /* Save computed LCR */ + +@@ -2901,7 +2901,7 @@ serial8250_do_set_termios(struct uart_po + serial_port_out(port, UART_FCR, up->fcr); /* set fcr */ + } + serial8250_set_mctrl(port, port->mctrl); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + serial8250_rpm_put(up); + + /* Don't rewrite B0 */ +@@ -2924,15 +2924,15 @@ void serial8250_do_set_ldisc(struct uart + { + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; +- spin_lock_irq(&port->lock); ++ uart_port_lock_irq(port); + serial8250_enable_ms(port); +- spin_unlock_irq(&port->lock); ++ uart_port_unlock_irq(port); + } else { + port->flags &= ~UPF_HARDPPS_CD; + if (!UART_ENABLE_MS(port, termios->c_cflag)) { +- spin_lock_irq(&port->lock); ++ uart_port_lock_irq(port); + serial8250_disable_ms(port); +- spin_unlock_irq(&port->lock); ++ uart_port_unlock_irq(port); + } + } + } +@@ -3406,9 +3406,9 @@ void serial8250_console_write(struct uar + touch_nmi_watchdog(); + + if (oops_in_progress) +- locked = spin_trylock_irqsave(&port->lock, flags); ++ locked = uart_port_trylock_irqsave(port, &flags); + else +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + /* + * First save the IER then disable the interrupts +@@ -3478,7 +3478,7 @@ void serial8250_console_write(struct uar + serial8250_modem_status(up); + + if (locked) +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static unsigned int probe_baud(struct uart_port *port) -- cgit v1.2.3