From 27d3313807296c3943a96ceef8c2b7279cb56962 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:39:59 +0200 Subject: Adding debian version 6.7.7-1. Signed-off-by: Daniel Baumann --- ...69-serial-sunzilog-Use-port-lock-wrappers.patch | 211 --------------------- 1 file changed, 211 deletions(-) delete mode 100644 debian/patches-rt/0069-serial-sunzilog-Use-port-lock-wrappers.patch (limited to 'debian/patches-rt/0069-serial-sunzilog-Use-port-lock-wrappers.patch') diff --git a/debian/patches-rt/0069-serial-sunzilog-Use-port-lock-wrappers.patch b/debian/patches-rt/0069-serial-sunzilog-Use-port-lock-wrappers.patch deleted file mode 100644 index dca4327a46..0000000000 --- a/debian/patches-rt/0069-serial-sunzilog-Use-port-lock-wrappers.patch +++ /dev/null @@ -1,211 +0,0 @@ -From: Thomas Gleixner -Date: Thu, 14 Sep 2023 20:44:26 +0206 -Subject: [PATCH 069/134] serial: sunzilog: Use port lock wrappers -Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz - -When a serial port is used for kernel console output, then all -modifications to the UART registers which are done from other contexts, -e.g. getty, termios, are interference points for the kernel console. - -So far this has been ignored and the printk output is based on the -principle of hope. The rework of the console infrastructure which aims to -support threaded and atomic consoles, requires to mark sections which -modify the UART registers as unsafe. This allows the atomic write function -to make informed decisions and eventually to restore operational state. It -also allows to prevent the regular UART code from modifying UART registers -while printk output is in progress. - -All modifications of UART registers are guarded by the UART port lock, -which provides an obvious synchronization point with the console -infrastructure. - -To avoid adding this functionality to all UART drivers, wrap the -spin_[un]lock*() invocations for uart_port::lock into helper functions -which just contain the spin_[un]lock*() invocations for now. In a -subsequent step these helpers will gain the console synchronization -mechanisms. - -Converted with coccinelle. No functional change. - -Signed-off-by: Thomas Gleixner -Signed-off-by: John Ogness -Link: https://lore.kernel.org/r/20230914183831.587273-70-john.ogness@linutronix.de -Signed-off-by: Greg Kroah-Hartman -Signed-off-by: Sebastian Andrzej Siewior ---- - drivers/tty/serial/sunzilog.c | 42 +++++++++++++++++++++--------------------- - 1 file changed, 21 insertions(+), 21 deletions(-) - ---- a/drivers/tty/serial/sunzilog.c -+++ b/drivers/tty/serial/sunzilog.c -@@ -531,7 +531,7 @@ static irqreturn_t sunzilog_interrupt(in - struct tty_port *port; - unsigned char r3; - -- spin_lock(&up->port.lock); -+ uart_port_lock(&up->port); - r3 = read_zsreg(channel, R3); - - /* Channel A */ -@@ -548,7 +548,7 @@ static irqreturn_t sunzilog_interrupt(in - if (r3 & CHATxIP) - sunzilog_transmit_chars(up, channel); - } -- spin_unlock(&up->port.lock); -+ uart_port_unlock(&up->port); - - if (port) - tty_flip_buffer_push(port); -@@ -557,7 +557,7 @@ static irqreturn_t sunzilog_interrupt(in - up = up->next; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - -- spin_lock(&up->port.lock); -+ uart_port_lock(&up->port); - port = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - writeb(RES_H_IUS, &channel->control); -@@ -571,7 +571,7 @@ static irqreturn_t sunzilog_interrupt(in - if (r3 & CHBTxIP) - sunzilog_transmit_chars(up, channel); - } -- spin_unlock(&up->port.lock); -+ uart_port_unlock(&up->port); - - if (port) - tty_flip_buffer_push(port); -@@ -604,11 +604,11 @@ static unsigned int sunzilog_tx_empty(st - unsigned char status; - unsigned int ret; - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - status = sunzilog_read_channel_status(port); - -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - - if (status & Tx_BUF_EMP) - ret = TIOCSER_TEMT; -@@ -764,7 +764,7 @@ static void sunzilog_break_ctl(struct ua - else - clear_bits |= SND_BRK; - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != up->curregs[R5]) { -@@ -774,7 +774,7 @@ static void sunzilog_break_ctl(struct ua - write_zsreg(channel, R5, up->curregs[R5]); - } - -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - } - - static void __sunzilog_startup(struct uart_sunzilog_port *up) -@@ -800,9 +800,9 @@ static int sunzilog_startup(struct uart_ - if (ZS_IS_CONS(up)) - return 0; - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - __sunzilog_startup(up); -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - return 0; - } - -@@ -840,7 +840,7 @@ static void sunzilog_shutdown(struct uar - if (ZS_IS_CONS(up)) - return; - -- spin_lock_irqsave(&port->lock, flags); -+ uart_port_lock_irqsave(port, &flags); - - channel = ZILOG_CHANNEL_FROM_PORT(port); - -@@ -853,7 +853,7 @@ static void sunzilog_shutdown(struct uar - up->curregs[R5] &= ~SND_BRK; - sunzilog_maybe_update_regs(up, channel); - -- spin_unlock_irqrestore(&port->lock, flags); -+ uart_port_unlock_irqrestore(port, flags); - } - - /* Shared by TTY driver and serial console setup. The port lock is held -@@ -945,7 +945,7 @@ sunzilog_set_termios(struct uart_port *p - - baud = uart_get_baud_rate(port, termios, old, 1200, 76800); - -- spin_lock_irqsave(&up->port.lock, flags); -+ uart_port_lock_irqsave(&up->port, &flags); - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - -@@ -962,7 +962,7 @@ sunzilog_set_termios(struct uart_port *p - - uart_update_timeout(port, termios->c_cflag, baud); - -- spin_unlock_irqrestore(&up->port.lock, flags); -+ uart_port_unlock_irqrestore(&up->port, flags); - } - - static const char *sunzilog_type(struct uart_port *port) -@@ -1201,15 +1201,15 @@ sunzilog_console_write(struct console *c - int locked = 1; - - if (up->port.sysrq || oops_in_progress) -- locked = spin_trylock_irqsave(&up->port.lock, flags); -+ locked = uart_port_trylock_irqsave(&up->port, &flags); - else -- spin_lock_irqsave(&up->port.lock, flags); -+ uart_port_lock_irqsave(&up->port, &flags); - - uart_console_write(&up->port, s, count, sunzilog_putchar); - udelay(2); - - if (locked) -- spin_unlock_irqrestore(&up->port.lock, flags); -+ uart_port_unlock_irqrestore(&up->port, flags); - } - - static int __init sunzilog_console_setup(struct console *con, char *options) -@@ -1244,7 +1244,7 @@ static int __init sunzilog_console_setup - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - -- spin_lock_irqsave(&up->port.lock, flags); -+ uart_port_lock_irqsave(&up->port, &flags); - - up->curregs[R15] |= BRKIE; - sunzilog_convert_to_zs(up, con->cflag, 0, brg); -@@ -1252,7 +1252,7 @@ static int __init sunzilog_console_setup - sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - __sunzilog_startup(up); - -- spin_unlock_irqrestore(&up->port.lock, flags); -+ uart_port_unlock_irqrestore(&up->port, flags); - - return 0; - } -@@ -1333,7 +1333,7 @@ static void sunzilog_init_hw(struct uart - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - -- spin_lock_irqsave(&up->port.lock, flags); -+ uart_port_lock_irqsave(&up->port, &flags); - if (ZS_IS_CHANNEL_A(up)) { - write_zsreg(channel, R9, FHWRES); - ZSDELAY_LONG(); -@@ -1383,7 +1383,7 @@ static void sunzilog_init_hw(struct uart - write_zsreg(channel, R9, up->curregs[R9]); - } - -- spin_unlock_irqrestore(&up->port.lock, flags); -+ uart_port_unlock_irqrestore(&up->port, flags); - - #ifdef CONFIG_SERIO - if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | -- cgit v1.2.3