From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/ata/libata-acpi.c | 1028 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1028 insertions(+) create mode 100644 drivers/ata/libata-acpi.c (limited to 'drivers/ata/libata-acpi.c') diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c new file mode 100644 index 0000000000..d36e71f475 --- /dev/null +++ b/drivers/ata/libata-acpi.c @@ -0,0 +1,1028 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * libata-acpi.c + * Provides ACPI support for PATA/SATA. + * + * Copyright (C) 2006 Intel Corp. + * Copyright (C) 2006 Randy Dunlap + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "libata.h" + +unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT; +module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644); +MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)"); + +#define NO_PORT_MULT 0xffff +#define SATA_ADR(root, pmp) (((root) << 16) | (pmp)) + +#define REGS_PER_GTF 7 +struct ata_acpi_gtf { + u8 tf[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ +} __packed; + +static void ata_acpi_clear_gtf(struct ata_device *dev) +{ + kfree(dev->gtf_cache); + dev->gtf_cache = NULL; +} + +struct ata_acpi_hotplug_context { + struct acpi_hotplug_context hp; + union { + struct ata_port *ap; + struct ata_device *dev; + } data; +}; + +#define ata_hotplug_data(context) (container_of((context), struct ata_acpi_hotplug_context, hp)->data) + +/** + * ata_dev_acpi_handle - provide the acpi_handle for an ata_device + * @dev: the acpi_handle returned will correspond to this device + * + * Returns the acpi_handle for the ACPI namespace object corresponding to + * the ata_device passed into the function, or NULL if no such object exists + * or ACPI is disabled for this device due to consecutive errors. + */ +acpi_handle ata_dev_acpi_handle(struct ata_device *dev) +{ + return dev->flags & ATA_DFLAG_ACPI_DISABLED ? + NULL : ACPI_HANDLE(&dev->tdev); +} + +/* @ap and @dev are the same as ata_acpi_handle_hotplug() */ +static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) +{ + if (dev) + dev->flags |= ATA_DFLAG_DETACH; + else { + struct ata_link *tlink; + struct ata_device *tdev; + + ata_for_each_link(tlink, ap, EDGE) + ata_for_each_dev(tdev, tlink, ALL) + tdev->flags |= ATA_DFLAG_DETACH; + } + + ata_port_schedule_eh(ap); +} + +/** + * ata_acpi_handle_hotplug - ACPI event handler backend + * @ap: ATA port ACPI event occurred + * @dev: ATA device ACPI event occurred (can be NULL) + * @event: ACPI event which occurred + * + * All ACPI bay / device realted events end up in this function. If + * the event is port-wide @dev is NULL. If the event is specific to a + * device, @dev points to it. + * + * Hotplug (as opposed to unplug) notification is always handled as + * port-wide while unplug only kills the target device on device-wide + * event. + * + * LOCKING: + * ACPI notify handler context. May sleep. + */ +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, + u32 event) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + int wait = 0; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + /* + * When dock driver calls into the routine, it will always use + * ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and + * ACPI_NOTIFY_EJECT_REQUEST for remove + */ + switch (event) { + case ACPI_NOTIFY_BUS_CHECK: + case ACPI_NOTIFY_DEVICE_CHECK: + ata_ehi_push_desc(ehi, "ACPI event"); + + ata_ehi_hotplugged(ehi); + ata_port_freeze(ap); + break; + case ACPI_NOTIFY_EJECT_REQUEST: + ata_ehi_push_desc(ehi, "ACPI event"); + + ata_acpi_detach_device(ap, dev); + wait = 1; + break; + } + + spin_unlock_irqrestore(ap->lock, flags); + + if (wait) + ata_port_wait_eh(ap); +} + +static int ata_acpi_dev_notify_dock(struct acpi_device *adev, u32 event) +{ + struct ata_device *dev = ata_hotplug_data(adev->hp).dev; + ata_acpi_handle_hotplug(dev->link->ap, dev, event); + return 0; +} + +static int ata_acpi_ap_notify_dock(struct acpi_device *adev, u32 event) +{ + ata_acpi_handle_hotplug(ata_hotplug_data(adev->hp).ap, NULL, event); + return 0; +} + +static void ata_acpi_uevent(struct ata_port *ap, struct ata_device *dev, + u32 event) +{ + struct kobject *kobj = NULL; + char event_string[20]; + char *envp[] = { event_string, NULL }; + + if (dev) { + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; + } else + kobj = &ap->dev->kobj; + + if (kobj) { + snprintf(event_string, 20, "BAY_EVENT=%d", event); + kobject_uevent_env(kobj, KOBJ_CHANGE, envp); + } +} + +static void ata_acpi_ap_uevent(struct acpi_device *adev, u32 event) +{ + ata_acpi_uevent(ata_hotplug_data(adev->hp).ap, NULL, event); +} + +static void ata_acpi_dev_uevent(struct acpi_device *adev, u32 event) +{ + struct ata_device *dev = ata_hotplug_data(adev->hp).dev; + ata_acpi_uevent(dev->link->ap, dev, event); +} + +/* bind acpi handle to pata port */ +void ata_acpi_bind_port(struct ata_port *ap) +{ + struct acpi_device *host_companion = ACPI_COMPANION(ap->host->dev); + struct acpi_device *adev; + struct ata_acpi_hotplug_context *context; + + if (libata_noacpi || ap->flags & ATA_FLAG_ACPI_SATA || !host_companion) + return; + + acpi_preset_companion(&ap->tdev, host_companion, ap->port_no); + + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; + + adev = ACPI_COMPANION(&ap->tdev); + if (!adev || adev->hp) + return; + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return; + + context->data.ap = ap; + acpi_initialize_hp_context(adev, &context->hp, ata_acpi_ap_notify_dock, + ata_acpi_ap_uevent); +} + +void ata_acpi_bind_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct acpi_device *port_companion = ACPI_COMPANION(&ap->tdev); + struct acpi_device *host_companion = ACPI_COMPANION(ap->host->dev); + struct acpi_device *parent, *adev; + struct ata_acpi_hotplug_context *context; + u64 adr; + + /* + * For both sata/pata devices, host companion device is required. + * For pata device, port companion device is also required. + */ + if (libata_noacpi || !host_companion || + (!(ap->flags & ATA_FLAG_ACPI_SATA) && !port_companion)) + return; + + if (ap->flags & ATA_FLAG_ACPI_SATA) { + if (!sata_pmp_attached(ap)) + adr = SATA_ADR(ap->port_no, NO_PORT_MULT); + else + adr = SATA_ADR(ap->port_no, dev->link->pmp); + parent = host_companion; + } else { + adr = dev->devno; + parent = port_companion; + } + + acpi_preset_companion(&dev->tdev, parent, adr); + adev = ACPI_COMPANION(&dev->tdev); + if (!adev || adev->hp) + return; + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return; + + context->data.dev = dev; + acpi_initialize_hp_context(adev, &context->hp, ata_acpi_dev_notify_dock, + ata_acpi_dev_uevent); +} + +/** + * ata_acpi_dissociate - dissociate ATA host from ACPI objects + * @host: target ATA host + * + * This function is called during driver detach after the whole host + * is shut down. + * + * LOCKING: + * EH context. + */ +void ata_acpi_dissociate(struct ata_host *host) +{ + int i; + + /* Restore initial _GTM values so that driver which attaches + * afterward can use them too. + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + + if (ACPI_HANDLE(&ap->tdev) && gtm) + ata_acpi_stm(ap, gtm); + } +} + +/** + * ata_acpi_gtm - execute _GTM + * @ap: target ATA port + * @gtm: out parameter for _GTM result + * + * Evaluate _GTM and store the result in @gtm. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure. + */ +int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm) +{ + struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER }; + union acpi_object *out_obj; + acpi_status status; + int rc = 0; + acpi_handle handle = ACPI_HANDLE(&ap->tdev); + + if (!handle) + return -EINVAL; + + status = acpi_evaluate_object(handle, "_GTM", NULL, &output); + + rc = -ENOENT; + if (status == AE_NOT_FOUND) + goto out_free; + + rc = -EINVAL; + if (ACPI_FAILURE(status)) { + ata_port_err(ap, "ACPI get timing mode failed (AE 0x%x)\n", + status); + goto out_free; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ata_port_warn(ap, "_GTM returned unexpected object type 0x%x\n", + out_obj->type); + + goto out_free; + } + + if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) { + ata_port_err(ap, "_GTM returned invalid length %d\n", + out_obj->buffer.length); + goto out_free; + } + + memcpy(gtm, out_obj->buffer.pointer, sizeof(struct ata_acpi_gtm)); + rc = 0; + out_free: + kfree(output.pointer); + return rc; +} + +EXPORT_SYMBOL_GPL(ata_acpi_gtm); + +/** + * ata_acpi_stm - execute _STM + * @ap: target ATA port + * @stm: timing parameter to _STM + * + * Evaluate _STM with timing parameter @stm. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure. + */ +int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm) +{ + acpi_status status; + struct ata_acpi_gtm stm_buf = *stm; + struct acpi_object_list input; + union acpi_object in_params[3]; + + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(struct ata_acpi_gtm); + in_params[0].buffer.pointer = (u8 *)&stm_buf; + /* Buffers for id may need byteswapping ? */ + in_params[1].type = ACPI_TYPE_BUFFER; + in_params[1].buffer.length = 512; + in_params[1].buffer.pointer = (u8 *)ap->link.device[0].id; + in_params[2].type = ACPI_TYPE_BUFFER; + in_params[2].buffer.length = 512; + in_params[2].buffer.pointer = (u8 *)ap->link.device[1].id; + + input.count = 3; + input.pointer = in_params; + + status = acpi_evaluate_object(ACPI_HANDLE(&ap->tdev), "_STM", + &input, NULL); + + if (status == AE_NOT_FOUND) + return -ENOENT; + if (ACPI_FAILURE(status)) { + ata_port_err(ap, "ACPI set timing mode failed (status=0x%x)\n", + status); + return -EINVAL; + } + return 0; +} + +EXPORT_SYMBOL_GPL(ata_acpi_stm); + +/** + * ata_dev_get_GTF - get the drive bootup default taskfile settings + * @dev: target ATA device + * @gtf: output parameter for buffer containing _GTF taskfile arrays + * + * This applies to both PATA and SATA drives. + * + * The _GTF method has no input parameters. + * It returns a variable number of register set values (registers + * hex 1F1..1F7, taskfiles). + * The is not known in advance, so have ACPI-CA + * allocate the buffer as needed and return it, then free it later. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL + * if _GTF is invalid. + */ +static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) +{ + acpi_status status; + struct acpi_buffer output; + union acpi_object *out_obj; + int rc = 0; + + /* if _GTF is cached, use the cached value */ + if (dev->gtf_cache) { + out_obj = dev->gtf_cache; + goto done; + } + + /* set up output buffer */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTF has no input parameters */ + status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_GTF", NULL, + &output); + out_obj = dev->gtf_cache = output.pointer; + + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) { + ata_dev_warn(dev, "_GTF evaluation failed (AE 0x%x)\n", + status); + rc = -EINVAL; + } + goto out_free; + } + + if (!output.length || !output.pointer) { + ata_dev_dbg(dev, "Run _GTF: length or ptr is NULL (0x%llx, 0x%p)\n", + (unsigned long long)output.length, + output.pointer); + rc = -EINVAL; + goto out_free; + } + + if (out_obj->type != ACPI_TYPE_BUFFER) { + ata_dev_warn(dev, "_GTF unexpected object type 0x%x\n", + out_obj->type); + rc = -EINVAL; + goto out_free; + } + + if (out_obj->buffer.length % REGS_PER_GTF) { + ata_dev_warn(dev, "unexpected _GTF length (%d)\n", + out_obj->buffer.length); + rc = -EINVAL; + goto out_free; + } + + done: + rc = out_obj->buffer.length / REGS_PER_GTF; + if (gtf) { + *gtf = (void *)out_obj->buffer.pointer; + ata_dev_dbg(dev, "returning gtf=%p, gtf_count=%d\n", + *gtf, rc); + } + return rc; + + out_free: + ata_acpi_clear_gtf(dev); + return rc; +} + +/** + * ata_acpi_gtm_xfermask - determine xfermode from GTM parameter + * @dev: target device + * @gtm: GTM parameter to use + * + * Determine xfermask for @dev from @gtm. + * + * LOCKING: + * None. + * + * RETURNS: + * Determined xfermask. + */ +unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm) +{ + unsigned int xfer_mask = 0; + unsigned int type; + int unit; + u8 mode; + + /* we always use the 0 slot for crap hardware */ + unit = dev->devno; + if (!(gtm->flags & 0x10)) + unit = 0; + + /* PIO */ + mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio); + xfer_mask |= ata_xfer_mode2mask(mode); + + /* See if we have MWDMA or UDMA data. We don't bother with + * MWDMA if UDMA is available as this means the BIOS set UDMA + * and our error changedown if it works is UDMA to PIO anyway. + */ + if (!(gtm->flags & (1 << (2 * unit)))) + type = ATA_SHIFT_MWDMA; + else + type = ATA_SHIFT_UDMA; + + mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma); + xfer_mask |= ata_xfer_mode2mask(mode); + + return xfer_mask; +} +EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); + +/** + * ata_acpi_cbl_80wire - Check for 80 wire cable + * @ap: Port to check + * @gtm: GTM data to use + * + * Return 1 if the @gtm indicates the BIOS selected an 80wire mode. + */ +int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, &ap->link, ENABLED) { + unsigned int xfer_mask, udma_mask; + + xfer_mask = ata_acpi_gtm_xfermask(dev, gtm); + ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask); + + if (udma_mask & ~ATA_UDMA_MASK_40C) + return 1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); + +static void ata_acpi_gtf_to_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + struct ata_taskfile *tf) +{ + ata_tf_init(dev, tf); + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + tf->error = gtf->tf[0]; /* 0x1f1 */ + tf->nsect = gtf->tf[1]; /* 0x1f2 */ + tf->lbal = gtf->tf[2]; /* 0x1f3 */ + tf->lbam = gtf->tf[3]; /* 0x1f4 */ + tf->lbah = gtf->tf[4]; /* 0x1f5 */ + tf->device = gtf->tf[5]; /* 0x1f6 */ + tf->status = gtf->tf[6]; /* 0x1f7 */ +} + +static int ata_acpi_filter_tf(struct ata_device *dev, + const struct ata_taskfile *tf, + const struct ata_taskfile *ptf) +{ + if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) { + /* libata doesn't use ACPI to configure transfer mode. + * It will only confuse device configuration. Skip. + */ + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER) + return 1; + } + + if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) { + /* BIOS writers, sorry but we don't wanna lock + * features unless the user explicitly said so. + */ + + /* DEVICE CONFIGURATION FREEZE LOCK */ + if (tf->command == ATA_CMD_CONF_OVERLAY && + tf->feature == ATA_DCO_FREEZE_LOCK) + return 1; + + /* SECURITY FREEZE LOCK */ + if (tf->command == ATA_CMD_SEC_FREEZE_LOCK) + return 1; + + /* SET MAX LOCK and SET MAX FREEZE LOCK */ + if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) && + tf->command == ATA_CMD_SET_MAX && + (tf->feature == ATA_SET_MAX_LOCK || + tf->feature == ATA_SET_MAX_FREEZE_LOCK)) + return 1; + } + + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_SATA_ENABLE) { + /* inhibit enabling DIPM */ + if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM && + tf->nsect == SATA_DIPM) + return 1; + + /* inhibit FPDMA non-zero offset */ + if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET && + (tf->nsect == SATA_FPDMA_OFFSET || + tf->nsect == SATA_FPDMA_IN_ORDER)) + return 1; + + /* inhibit FPDMA auto activation */ + if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA && + tf->nsect == SATA_FPDMA_AA) + return 1; + } + + return 0; +} + +/** + * ata_acpi_run_tf - send taskfile registers to host controller + * @dev: target ATA device + * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) + * @prev_gtf: previous command + * + * Outputs ATA taskfile to standard ATA host controller. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 1 if command is executed successfully. 0 if ignored, rejected or + * filtered out, -errno on other errors. + */ +static int ata_acpi_run_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + const struct ata_acpi_gtf *prev_gtf) +{ + struct ata_taskfile *pptf = NULL; + struct ata_taskfile tf, ptf, rtf; + unsigned int err_mask; + const char *descr; + int rc; + + if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0) + && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0) + && (gtf->tf[6] == 0)) + return 0; + + ata_acpi_gtf_to_tf(dev, gtf, &tf); + if (prev_gtf) { + ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf); + pptf = &ptf; + } + + descr = ata_get_cmd_name(tf.command); + + if (!ata_acpi_filter_tf(dev, &tf, pptf)) { + rtf = tf; + err_mask = ata_exec_internal(dev, &rtf, NULL, + DMA_NONE, NULL, 0, 0); + + switch (err_mask) { + case 0: + ata_dev_dbg(dev, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x" + "(%s) succeeded\n", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, descr); + rc = 1; + break; + + case AC_ERR_DEV: + ata_dev_info(dev, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x" + "(%s) rejected by device (Stat=0x%02x Err=0x%02x)", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, descr, + rtf.status, rtf.error); + rc = 0; + break; + + default: + ata_dev_err(dev, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x" + "(%s) failed (Emask=0x%x Stat=0x%02x Err=0x%02x)", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, descr, + err_mask, rtf.status, rtf.error); + rc = -EIO; + break; + } + } else { + ata_dev_info(dev, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x" + "(%s) filtered out\n", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, descr); + rc = 0; + } + return rc; +} + +/** + * ata_acpi_exec_tfs - get then write drive taskfile settings + * @dev: target ATA device + * @nr_executed: out parameter for the number of executed commands + * + * Evaluate _GTF and execute returned taskfiles. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Number of executed taskfiles on success, 0 if _GTF doesn't exist. + * -errno on other errors. + */ +static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) +{ + struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL; + int gtf_count, i, rc; + + /* get taskfiles */ + rc = ata_dev_get_GTF(dev, >f); + if (rc < 0) + return rc; + gtf_count = rc; + + /* execute them */ + for (i = 0; i < gtf_count; i++, gtf++) { + rc = ata_acpi_run_tf(dev, gtf, pgtf); + if (rc < 0) + break; + if (rc) { + (*nr_executed)++; + pgtf = gtf; + } + } + + ata_acpi_clear_gtf(dev); + + if (rc < 0) + return rc; + return 0; +} + +/** + * ata_acpi_push_id - send Identify data to drive + * @dev: target ATA device + * + * _SDD ACPI object: for SATA mode only + * Must be after Identify (Packet) Device -- uses its data + * ATM this function never returns a failure. It is an optional + * method and if it fails for whatever reason, we should still + * just keep going. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure. + */ +static int ata_acpi_push_id(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[1]; + + ata_dev_dbg(dev, "%s: ix = %d, port#: %d\n", + __func__, dev->devno, ap->port_no); + + /* Give the drive Identify data to the drive via the _SDD method */ + /* _SDD: set up input parameters */ + input.count = 1; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS; + in_params[0].buffer.pointer = (u8 *)dev->id; + /* Output buffer: _SDD has no output */ + + /* It's OK for _SDD to be missing too. */ + swap_buf_le16(dev->id, ATA_ID_WORDS); + status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_SDD", &input, + NULL); + swap_buf_le16(dev->id, ATA_ID_WORDS); + + if (status == AE_NOT_FOUND) + return -ENOENT; + + if (ACPI_FAILURE(status)) { + ata_dev_warn(dev, "ACPI _SDD failed (AE 0x%x)\n", status); + return -EIO; + } + + return 0; +} + +/** + * ata_acpi_on_resume - ATA ACPI hook called on resume + * @ap: target ATA port + * + * This function is called when @ap is resumed - right after port + * itself is resumed but before any EH action is taken. + * + * LOCKING: + * EH context. + */ +void ata_acpi_on_resume(struct ata_port *ap) +{ + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + struct ata_device *dev; + + if (ACPI_HANDLE(&ap->tdev) && gtm) { + /* _GTM valid */ + + /* restore timing parameters */ + ata_acpi_stm(ap, gtm); + + /* _GTF should immediately follow _STM so that it can + * use values set by _STM. Cache _GTF result and + * schedule _GTF. + */ + ata_for_each_dev(dev, &ap->link, ALL) { + ata_acpi_clear_gtf(dev); + if (ata_dev_enabled(dev) && + ata_dev_acpi_handle(dev) && + ata_dev_get_GTF(dev, NULL) >= 0) + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } else { + /* SATA _GTF needs to be evaulated after _SDD and + * there's no reason to evaluate IDE _GTF early + * without _STM. Clear cache and schedule _GTF. + */ + ata_for_each_dev(dev, &ap->link, ALL) { + ata_acpi_clear_gtf(dev); + if (ata_dev_enabled(dev)) + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } +} + +static int ata_acpi_choose_suspend_state(struct ata_device *dev, bool runtime) +{ + int d_max_in = ACPI_STATE_D3_COLD; + if (!runtime) + goto out; + + /* + * For ATAPI, runtime D3 cold is only allowed + * for ZPODD in zero power ready state + */ + if (dev->class == ATA_DEV_ATAPI && + !(zpodd_dev_enabled(dev) && zpodd_zpready(dev))) + d_max_in = ACPI_STATE_D3_HOT; + +out: + return acpi_pm_device_sleep_state(&dev->tdev, NULL, d_max_in); +} + +static void sata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + bool runtime = PMSG_IS_AUTO(state); + struct ata_device *dev; + acpi_handle handle; + int acpi_state; + + ata_for_each_dev(dev, &ap->link, ENABLED) { + handle = ata_dev_acpi_handle(dev); + if (!handle) + continue; + + if (!(state.event & PM_EVENT_RESUME)) { + acpi_state = ata_acpi_choose_suspend_state(dev, runtime); + if (acpi_state == ACPI_STATE_D0) + continue; + if (runtime && zpodd_dev_enabled(dev) && + acpi_state == ACPI_STATE_D3_COLD) + zpodd_enable_run_wake(dev); + acpi_bus_set_power(handle, acpi_state); + } else { + if (runtime && zpodd_dev_enabled(dev)) + zpodd_disable_run_wake(dev); + acpi_bus_set_power(handle, ACPI_STATE_D0); + } + } +} + +/* ACPI spec requires _PS0 when IDE power on and _PS3 when power off */ +static void pata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + struct ata_device *dev; + acpi_handle port_handle; + + port_handle = ACPI_HANDLE(&ap->tdev); + if (!port_handle) + return; + + /* channel first and then drives for power on and vica versa + for power off */ + if (state.event & PM_EVENT_RESUME) + acpi_bus_set_power(port_handle, ACPI_STATE_D0); + + ata_for_each_dev(dev, &ap->link, ENABLED) { + acpi_handle dev_handle = ata_dev_acpi_handle(dev); + if (!dev_handle) + continue; + + acpi_bus_set_power(dev_handle, state.event & PM_EVENT_RESUME ? + ACPI_STATE_D0 : ACPI_STATE_D3_COLD); + } + + if (!(state.event & PM_EVENT_RESUME)) + acpi_bus_set_power(port_handle, ACPI_STATE_D3_COLD); +} + +/** + * ata_acpi_set_state - set the port power state + * @ap: target ATA port + * @state: state, on/off + * + * This function sets a proper ACPI D state for the device on + * system and runtime PM operations. + */ +void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + if (ap->flags & ATA_FLAG_ACPI_SATA) + sata_acpi_set_state(ap, state); + else + pata_acpi_set_state(ap, state); +} + +/** + * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration + * @dev: target ATA device + * + * This function is called when @dev is about to be configured. + * IDENTIFY data might have been modified after this hook is run. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Positive number if IDENTIFY data needs to be refreshed, 0 if not, + * -errno on failure. + */ +int ata_acpi_on_devcfg(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + struct ata_eh_context *ehc = &ap->link.eh_context; + int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA; + int nr_executed = 0; + int rc; + + if (!ata_dev_acpi_handle(dev)) + return 0; + + /* do we need to do _GTF? */ + if (!(dev->flags & ATA_DFLAG_ACPI_PENDING) && + !(acpi_sata && (ehc->i.flags & ATA_EHI_DID_HARDRESET))) + return 0; + + /* do _SDD if SATA */ + if (acpi_sata) { + rc = ata_acpi_push_id(dev); + if (rc && rc != -ENOENT) + goto acpi_err; + } + + /* do _GTF */ + rc = ata_acpi_exec_tfs(dev, &nr_executed); + if (rc) + goto acpi_err; + + dev->flags &= ~ATA_DFLAG_ACPI_PENDING; + + /* refresh IDENTIFY page if any _GTF command has been executed */ + if (nr_executed) { + rc = ata_dev_reread_id(dev, 0); + if (rc < 0) { + ata_dev_err(dev, + "failed to IDENTIFY after ACPI commands\n"); + return rc; + } + } + + return 0; + + acpi_err: + /* ignore evaluation failure if we can continue safely */ + if (rc == -EINVAL && !nr_executed && !ata_port_is_frozen(ap)) + return 0; + + /* fail and let EH retry once more for unknown IO errors */ + if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) { + dev->flags |= ATA_DFLAG_ACPI_FAILED; + return rc; + } + + dev->flags |= ATA_DFLAG_ACPI_DISABLED; + ata_dev_warn(dev, "ACPI: failed the second time, disabled\n"); + + /* We can safely continue if no _GTF command has been executed + * and port is not frozen. + */ + if (!nr_executed && !ata_port_is_frozen(ap)) + return 0; + + return rc; +} + +/** + * ata_acpi_on_disable - ATA ACPI hook called when a device is disabled + * @dev: target ATA device + * + * This function is called when @dev is about to be disabled. + * + * LOCKING: + * EH context. + */ +void ata_acpi_on_disable(struct ata_device *dev) +{ + ata_acpi_clear_gtf(dev); +} -- cgit v1.2.3