From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/ata/pata_cypress.c | 173 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 drivers/ata/pata_cypress.c (limited to 'drivers/ata/pata_cypress.c') diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c new file mode 100644 index 000000000..ae347b5c2 --- /dev/null +++ b/drivers/ata/pata_cypress.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pata_cypress.c - Cypress PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox + * + * Based heavily on + * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cypress" +#define DRV_VERSION "0.1.5" + +/* here are the offset definitions for the registers */ + +enum { + CY82_IDE_CMDREG = 0x04, + CY82_IDE_ADDRSETUP = 0x48, + CY82_IDE_MASTER_IOR = 0x4C, + CY82_IDE_MASTER_IOW = 0x4D, + CY82_IDE_SLAVE_IOR = 0x4E, + CY82_IDE_SLAVE_IOW = 0x4F, + CY82_IDE_MASTER_8BIT = 0x50, + CY82_IDE_SLAVE_8BIT = 0x51, + + CY82_INDEX_PORT = 0x22, + CY82_DATA_PORT = 0x23, + + CY82_INDEX_CTRLREG1 = 0x01, + CY82_INDEX_CHANNEL0 = 0x30, + CY82_INDEX_CHANNEL1 = 0x31, + CY82_INDEX_TIMEOUT = 0x32 +}; + +static bool enable_dma = true; +module_param(enable_dma, bool, 0); +MODULE_PARM_DESC(enable_dma, "Enable bus master DMA operations"); + +/** + * cy82c693_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + short time_16, time_8; + u32 addr; + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) { + ata_dev_err(adev, DRV_NAME ": mome computation failed.\n"); + return; + } + + time_16 = clamp_val(t.recover - 1, 0, 15) | + (clamp_val(t.active - 1, 0, 15) << 4); + time_8 = clamp_val(t.act8b - 1, 0, 15) | + (clamp_val(t.rec8b - 1, 0, 15) << 4); + + if (adev->devno == 0) { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0x0F; /* Mask bits */ + addr |= clamp_val(t.setup - 1, 0, 15); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8); + } else { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0xF0; /* Mask bits */ + addr |= (clamp_val(t.setup - 1, 0, 15) << 4); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8); + } +} + +/** + * cy82c693_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int reg = CY82_INDEX_CHANNEL0 + ap->port_no; + + /* Be afraid, be very afraid. Magic registers in low I/O space */ + outb(reg, 0x22); + outb(adev->dma_mode - XFER_MW_DMA_0, 0x23); + + /* 0x50 gives the best behaviour on the Alpha's using this chip */ + outb(CY82_INDEX_TIMEOUT, 0x22); + outb(0x50, 0x23); +} + +static const struct scsi_host_template cy82c693_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations cy82c693_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_40wire, + .set_piomode = cy82c693_set_piomode, + .set_dmamode = cy82c693_set_dmamode, +}; + +static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &cy82c693_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + if (enable_dma) + info.mwdma_mask = ATA_MWDMA2; + + /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. + For the moment we don't handle the secondary. FIXME */ + + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0); +} + +static const struct pci_device_id cy82c693[] = { + { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), }, + + { }, +}; + +static struct pci_driver cy82c693_pci_driver = { + .name = DRV_NAME, + .id_table = cy82c693, + .probe = cy82c693_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(cy82c693_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cy82c693); +MODULE_VERSION(DRV_VERSION); -- cgit v1.2.3