From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/bluetooth/hci_ldisc.c | 926 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 926 insertions(+) create mode 100644 drivers/bluetooth/hci_ldisc.c (limited to 'drivers/bluetooth/hci_ldisc.c') diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c new file mode 100644 index 000000000..a26367e9f --- /dev/null +++ b/drivers/bluetooth/hci_ldisc.c @@ -0,0 +1,926 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "btintel.h" +#include "btbcm.h" +#include "hci_uart.h" + +#define VERSION "2.3" + +static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; + +int hci_uart_register_proto(const struct hci_uart_proto *p) +{ + if (p->id >= HCI_UART_MAX_PROTO) + return -EINVAL; + + if (hup[p->id]) + return -EEXIST; + + hup[p->id] = p; + + BT_INFO("HCI UART protocol %s registered", p->name); + + return 0; +} + +int hci_uart_unregister_proto(const struct hci_uart_proto *p) +{ + if (p->id >= HCI_UART_MAX_PROTO) + return -EINVAL; + + if (!hup[p->id]) + return -EINVAL; + + hup[p->id] = NULL; + + return 0; +} + +static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id) +{ + if (id >= HCI_UART_MAX_PROTO) + return NULL; + + return hup[id]; +} + +static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) +{ + struct hci_dev *hdev = hu->hdev; + + /* Update HCI stat counters */ + switch (pkt_type) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } +} + +static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu) +{ + struct sk_buff *skb = hu->tx_skb; + + if (!skb) { + percpu_down_read(&hu->proto_lock); + + if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) + skb = hu->proto->dequeue(hu); + + percpu_up_read(&hu->proto_lock); + } else { + hu->tx_skb = NULL; + } + + return skb; +} + +int hci_uart_tx_wakeup(struct hci_uart *hu) +{ + /* This may be called in an IRQ context, so we can't sleep. Therefore + * we try to acquire the lock only, and if that fails we assume the + * tty is being closed because that is the only time the write lock is + * acquired. If, however, at some point in the future the write lock + * is also acquired in other situations, then this must be revisited. + */ + if (!percpu_down_read_trylock(&hu->proto_lock)) + return 0; + + if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) + goto no_schedule; + + set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); + if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) + goto no_schedule; + + BT_DBG(""); + + schedule_work(&hu->write_work); + +no_schedule: + percpu_up_read(&hu->proto_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(hci_uart_tx_wakeup); + +static void hci_uart_write_work(struct work_struct *work) +{ + struct hci_uart *hu = container_of(work, struct hci_uart, write_work); + struct tty_struct *tty = hu->tty; + struct hci_dev *hdev = hu->hdev; + struct sk_buff *skb; + + /* REVISIT: should we cope with bad skbs or ->write() returning + * and error value ? + */ + +restart: + clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); + + while ((skb = hci_uart_dequeue(hu))) { + int len; + + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + len = tty->ops->write(tty, skb->data, skb->len); + hdev->stat.byte_tx += len; + + skb_pull(skb, len); + if (skb->len) { + hu->tx_skb = skb; + break; + } + + hci_uart_tx_complete(hu, hci_skb_pkt_type(skb)); + kfree_skb(skb); + } + + clear_bit(HCI_UART_SENDING, &hu->tx_state); + if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state)) + goto restart; + + wake_up_bit(&hu->tx_state, HCI_UART_SENDING); +} + +void hci_uart_init_work(struct work_struct *work) +{ + struct hci_uart *hu = container_of(work, struct hci_uart, init_ready); + int err; + struct hci_dev *hdev; + + if (!test_and_clear_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags)) + return; + + err = hci_register_dev(hu->hdev); + if (err < 0) { + BT_ERR("Can't register HCI device"); + clear_bit(HCI_UART_PROTO_READY, &hu->flags); + hu->proto->close(hu); + hdev = hu->hdev; + hu->hdev = NULL; + hci_free_dev(hdev); + return; + } + + set_bit(HCI_UART_REGISTERED, &hu->flags); +} + +int hci_uart_init_ready(struct hci_uart *hu) +{ + if (!test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags)) + return -EALREADY; + + schedule_work(&hu->init_ready); + + return 0; +} + +int hci_uart_wait_until_sent(struct hci_uart *hu) +{ + return wait_on_bit_timeout(&hu->tx_state, HCI_UART_SENDING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(2000)); +} + +/* ------- Interface to HCI layer ------ */ +/* Reset device */ +static int hci_uart_flush(struct hci_dev *hdev) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + struct tty_struct *tty = hu->tty; + + BT_DBG("hdev %p tty %p", hdev, tty); + + if (hu->tx_skb) { + kfree_skb(hu->tx_skb); hu->tx_skb = NULL; + } + + /* Flush any pending characters in the driver and discipline. */ + tty_ldisc_flush(tty); + tty_driver_flush_buffer(tty); + + percpu_down_read(&hu->proto_lock); + + if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) + hu->proto->flush(hu); + + percpu_up_read(&hu->proto_lock); + + return 0; +} + +/* Initialize device */ +static int hci_uart_open(struct hci_dev *hdev) +{ + BT_DBG("%s %p", hdev->name, hdev); + + /* Undo clearing this from hci_uart_close() */ + hdev->flush = hci_uart_flush; + + return 0; +} + +/* Close device */ +static int hci_uart_close(struct hci_dev *hdev) +{ + BT_DBG("hdev %p", hdev); + + hci_uart_flush(hdev); + hdev->flush = NULL; + return 0; +} + +/* Send frames from HCI layer */ +static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + + BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb), + skb->len); + + percpu_down_read(&hu->proto_lock); + + if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) { + percpu_up_read(&hu->proto_lock); + return -EUNATCH; + } + + hu->proto->enqueue(hu, skb); + percpu_up_read(&hu->proto_lock); + + hci_uart_tx_wakeup(hu); + + return 0; +} + +/* Check the underlying device or tty has flow control support */ +bool hci_uart_has_flow_control(struct hci_uart *hu) +{ + /* serdev nodes check if the needed operations are present */ + if (hu->serdev) + return true; + + if (hu->tty->driver->ops->tiocmget && hu->tty->driver->ops->tiocmset) + return true; + + return false; +} + +/* Flow control or un-flow control the device */ +void hci_uart_set_flow_control(struct hci_uart *hu, bool enable) +{ + struct tty_struct *tty = hu->tty; + struct ktermios ktermios; + int status; + unsigned int set = 0; + unsigned int clear = 0; + + if (hu->serdev) { + serdev_device_set_flow_control(hu->serdev, !enable); + serdev_device_set_rts(hu->serdev, !enable); + return; + } + + if (enable) { + /* Disable hardware flow control */ + ktermios = tty->termios; + ktermios.c_cflag &= ~CRTSCTS; + tty_set_termios(tty, &ktermios); + BT_DBG("Disabling hardware flow control: %s", + (tty->termios.c_cflag & CRTSCTS) ? "failed" : "success"); + + /* Clear RTS to prevent the device from sending */ + /* Most UARTs need OUT2 to enable interrupts */ + status = tty->driver->ops->tiocmget(tty); + BT_DBG("Current tiocm 0x%x", status); + + set &= ~(TIOCM_OUT2 | TIOCM_RTS); + clear = ~set; + set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + status = tty->driver->ops->tiocmset(tty, set, clear); + BT_DBG("Clearing RTS: %s", status ? "failed" : "success"); + } else { + /* Set RTS to allow the device to send again */ + status = tty->driver->ops->tiocmget(tty); + BT_DBG("Current tiocm 0x%x", status); + + set |= (TIOCM_OUT2 | TIOCM_RTS); + clear = ~set; + set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | + TIOCM_OUT2 | TIOCM_LOOP; + status = tty->driver->ops->tiocmset(tty, set, clear); + BT_DBG("Setting RTS: %s", status ? "failed" : "success"); + + /* Re-enable hardware flow control */ + ktermios = tty->termios; + ktermios.c_cflag |= CRTSCTS; + tty_set_termios(tty, &ktermios); + BT_DBG("Enabling hardware flow control: %s", + !(tty->termios.c_cflag & CRTSCTS) ? "failed" : "success"); + } +} + +void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed, + unsigned int oper_speed) +{ + hu->init_speed = init_speed; + hu->oper_speed = oper_speed; +} + +void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed) +{ + struct tty_struct *tty = hu->tty; + struct ktermios ktermios; + + ktermios = tty->termios; + ktermios.c_cflag &= ~CBAUD; + tty_termios_encode_baud_rate(&ktermios, speed, speed); + + /* tty_set_termios() return not checked as it is always 0 */ + tty_set_termios(tty, &ktermios); + + BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name, + tty->termios.c_ispeed, tty->termios.c_ospeed); +} + +static int hci_uart_setup(struct hci_dev *hdev) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + struct hci_rp_read_local_version *ver; + struct sk_buff *skb; + unsigned int speed; + int err; + + /* Init speed if any */ + if (hu->init_speed) + speed = hu->init_speed; + else if (hu->proto->init_speed) + speed = hu->proto->init_speed; + else + speed = 0; + + if (speed) + hci_uart_set_baudrate(hu, speed); + + /* Operational speed if any */ + if (hu->oper_speed) + speed = hu->oper_speed; + else if (hu->proto->oper_speed) + speed = hu->proto->oper_speed; + else + speed = 0; + + if (hu->proto->set_baudrate && speed) { + err = hu->proto->set_baudrate(hu, speed); + if (!err) + hci_uart_set_baudrate(hu, speed); + } + + if (hu->proto->setup) + return hu->proto->setup(hu); + + if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags)) + return 0; + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Reading local version information failed (%ld)", + hdev->name, PTR_ERR(skb)); + return 0; + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: Event length mismatch for version information", + hdev->name); + goto done; + } + + ver = (struct hci_rp_read_local_version *)skb->data; + + switch (le16_to_cpu(ver->manufacturer)) { +#ifdef CONFIG_BT_HCIUART_INTEL + case 2: + hdev->set_bdaddr = btintel_set_bdaddr; + btintel_check_bdaddr(hdev); + break; +#endif +#ifdef CONFIG_BT_HCIUART_BCM + case 15: + hdev->set_bdaddr = btbcm_set_bdaddr; + btbcm_check_bdaddr(hdev); + break; +#endif + default: + break; + } + +done: + kfree_skb(skb); + return 0; +} + +/* ------ LDISC part ------ */ +/* hci_uart_tty_open + * + * Called when line discipline changed to HCI_UART. + * + * Arguments: + * tty pointer to tty info structure + * Return Value: + * 0 if success, otherwise error code + */ +static int hci_uart_tty_open(struct tty_struct *tty) +{ + struct hci_uart *hu; + + BT_DBG("tty %p", tty); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + /* Error if the tty has no write op instead of leaving an exploitable + * hole + */ + if (tty->ops->write == NULL) + return -EOPNOTSUPP; + + hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL); + if (!hu) { + BT_ERR("Can't allocate control structure"); + return -ENFILE; + } + if (percpu_init_rwsem(&hu->proto_lock)) { + BT_ERR("Can't allocate semaphore structure"); + kfree(hu); + return -ENOMEM; + } + + tty->disc_data = hu; + hu->tty = tty; + tty->receive_room = 65536; + + /* disable alignment support by default */ + hu->alignment = 1; + hu->padding = 0; + + INIT_WORK(&hu->init_ready, hci_uart_init_work); + INIT_WORK(&hu->write_work, hci_uart_write_work); + + /* Flush any pending characters in the driver */ + tty_driver_flush_buffer(tty); + + return 0; +} + +/* hci_uart_tty_close() + * + * Called when the line discipline is changed to something + * else, the tty is closed, or the tty detects a hangup. + */ +static void hci_uart_tty_close(struct tty_struct *tty) +{ + struct hci_uart *hu = tty->disc_data; + struct hci_dev *hdev; + + BT_DBG("tty %p", tty); + + /* Detach from the tty */ + tty->disc_data = NULL; + + if (!hu) + return; + + hdev = hu->hdev; + if (hdev) + hci_uart_close(hdev); + + if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) { + percpu_down_write(&hu->proto_lock); + clear_bit(HCI_UART_PROTO_READY, &hu->flags); + percpu_up_write(&hu->proto_lock); + + cancel_work_sync(&hu->init_ready); + cancel_work_sync(&hu->write_work); + + if (hdev) { + if (test_bit(HCI_UART_REGISTERED, &hu->flags)) + hci_unregister_dev(hdev); + hci_free_dev(hdev); + } + hu->proto->close(hu); + } + clear_bit(HCI_UART_PROTO_SET, &hu->flags); + + percpu_free_rwsem(&hu->proto_lock); + + kfree(hu); +} + +/* hci_uart_tty_wakeup() + * + * Callback for transmit wakeup. Called when low level + * device driver can accept more send data. + * + * Arguments: tty pointer to associated tty instance data + * Return Value: None + */ +static void hci_uart_tty_wakeup(struct tty_struct *tty) +{ + struct hci_uart *hu = tty->disc_data; + + BT_DBG(""); + + if (!hu) + return; + + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + + if (tty != hu->tty) + return; + + if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) + hci_uart_tx_wakeup(hu); +} + +/* hci_uart_tty_receive() + * + * Called by tty low level driver when receive data is + * available. + * + * Arguments: tty pointer to tty isntance data + * data pointer to received data + * flags pointer to flags for data + * count count of received data in bytes + * + * Return Value: None + */ +static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, + const u8 *flags, size_t count) +{ + struct hci_uart *hu = tty->disc_data; + + if (!hu || tty != hu->tty) + return; + + percpu_down_read(&hu->proto_lock); + + if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) { + percpu_up_read(&hu->proto_lock); + return; + } + + /* It does not need a lock here as it is already protected by a mutex in + * tty caller + */ + hu->proto->recv(hu, data, count); + percpu_up_read(&hu->proto_lock); + + if (hu->hdev) + hu->hdev->stat.byte_rx += count; + + tty_unthrottle(tty); +} + +static int hci_uart_register_dev(struct hci_uart *hu) +{ + struct hci_dev *hdev; + int err; + + BT_DBG(""); + + /* Initialize and register HCI device */ + hdev = hci_alloc_dev(); + if (!hdev) { + BT_ERR("Can't allocate HCI device"); + return -ENOMEM; + } + + hu->hdev = hdev; + + hdev->bus = HCI_UART; + hci_set_drvdata(hdev, hu); + + /* Only when vendor specific setup callback is provided, consider + * the manufacturer information valid. This avoids filling in the + * value for Ericsson when nothing is specified. + */ + if (hu->proto->setup) + hdev->manufacturer = hu->proto->manufacturer; + + hdev->open = hci_uart_open; + hdev->close = hci_uart_close; + hdev->flush = hci_uart_flush; + hdev->send = hci_uart_send_frame; + hdev->setup = hci_uart_setup; + SET_HCIDEV_DEV(hdev, hu->tty->dev); + + if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags)) + set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); + + if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags)) + set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks); + + if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags)) + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags)) + hdev->dev_type = HCI_AMP; + else + hdev->dev_type = HCI_PRIMARY; + + /* Only call open() for the protocol after hdev is fully initialized as + * open() (or a timer/workqueue it starts) may attempt to reference it. + */ + err = hu->proto->open(hu); + if (err) { + hu->hdev = NULL; + hci_free_dev(hdev); + return err; + } + + if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags)) + return 0; + + if (hci_register_dev(hdev) < 0) { + BT_ERR("Can't register HCI device"); + hu->proto->close(hu); + hu->hdev = NULL; + hci_free_dev(hdev); + return -ENODEV; + } + + set_bit(HCI_UART_REGISTERED, &hu->flags); + + return 0; +} + +static int hci_uart_set_proto(struct hci_uart *hu, int id) +{ + const struct hci_uart_proto *p; + int err; + + p = hci_uart_get_proto(id); + if (!p) + return -EPROTONOSUPPORT; + + hu->proto = p; + + err = hci_uart_register_dev(hu); + if (err) { + return err; + } + + set_bit(HCI_UART_PROTO_READY, &hu->flags); + return 0; +} + +static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags) +{ + unsigned long valid_flags = BIT(HCI_UART_RAW_DEVICE) | + BIT(HCI_UART_RESET_ON_INIT) | + BIT(HCI_UART_CREATE_AMP) | + BIT(HCI_UART_INIT_PENDING) | + BIT(HCI_UART_EXT_CONFIG) | + BIT(HCI_UART_VND_DETECT); + + if (flags & ~valid_flags) + return -EINVAL; + + hu->hdev_flags = flags; + + return 0; +} + +/* hci_uart_tty_ioctl() + * + * Process IOCTL system call for the tty device. + * + * Arguments: + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg argument for IOCTL call (cmd dependent) + * + * Return Value: Command dependent + */ +static int hci_uart_tty_ioctl(struct tty_struct *tty, unsigned int cmd, + unsigned long arg) +{ + struct hci_uart *hu = tty->disc_data; + int err = 0; + + BT_DBG(""); + + /* Verify the status of the device */ + if (!hu) + return -EBADF; + + switch (cmd) { + case HCIUARTSETPROTO: + if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) { + err = hci_uart_set_proto(hu, arg); + if (err) + clear_bit(HCI_UART_PROTO_SET, &hu->flags); + } else + err = -EBUSY; + break; + + case HCIUARTGETPROTO: + if (test_bit(HCI_UART_PROTO_SET, &hu->flags) && + test_bit(HCI_UART_PROTO_READY, &hu->flags)) + err = hu->proto->id; + else + err = -EUNATCH; + break; + + case HCIUARTGETDEVICE: + if (test_bit(HCI_UART_REGISTERED, &hu->flags)) + err = hu->hdev->id; + else + err = -EUNATCH; + break; + + case HCIUARTSETFLAGS: + if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) + err = -EBUSY; + else + err = hci_uart_set_flags(hu, arg); + break; + + case HCIUARTGETFLAGS: + err = hu->hdev_flags; + break; + + default: + err = n_tty_ioctl_helper(tty, cmd, arg); + break; + } + + return err; +} + +/* + * We don't provide read/write/poll interface for user space. + */ +static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, + u8 *buf, size_t nr, void **cookie, + unsigned long offset) +{ + return 0; +} + +static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, + const u8 *data, size_t count) +{ + return 0; +} + +static struct tty_ldisc_ops hci_uart_ldisc = { + .owner = THIS_MODULE, + .num = N_HCI, + .name = "n_hci", + .open = hci_uart_tty_open, + .close = hci_uart_tty_close, + .read = hci_uart_tty_read, + .write = hci_uart_tty_write, + .ioctl = hci_uart_tty_ioctl, + .compat_ioctl = hci_uart_tty_ioctl, + .receive_buf = hci_uart_tty_receive, + .write_wakeup = hci_uart_tty_wakeup, +}; + +static int __init hci_uart_init(void) +{ + int err; + + BT_INFO("HCI UART driver ver %s", VERSION); + + /* Register the tty discipline */ + err = tty_register_ldisc(&hci_uart_ldisc); + if (err) { + BT_ERR("HCI line discipline registration failed. (%d)", err); + return err; + } + +#ifdef CONFIG_BT_HCIUART_H4 + h4_init(); +#endif +#ifdef CONFIG_BT_HCIUART_BCSP + bcsp_init(); +#endif +#ifdef CONFIG_BT_HCIUART_LL + ll_init(); +#endif +#ifdef CONFIG_BT_HCIUART_ATH3K + ath_init(); +#endif +#ifdef CONFIG_BT_HCIUART_3WIRE + h5_init(); +#endif +#ifdef CONFIG_BT_HCIUART_INTEL + intel_init(); +#endif +#ifdef CONFIG_BT_HCIUART_BCM + bcm_init(); +#endif +#ifdef CONFIG_BT_HCIUART_QCA + qca_init(); +#endif +#ifdef CONFIG_BT_HCIUART_AG6XX + ag6xx_init(); +#endif +#ifdef CONFIG_BT_HCIUART_MRVL + mrvl_init(); +#endif + + return 0; +} + +static void __exit hci_uart_exit(void) +{ +#ifdef CONFIG_BT_HCIUART_H4 + h4_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_BCSP + bcsp_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_LL + ll_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_ATH3K + ath_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_3WIRE + h5_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_INTEL + intel_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_BCM + bcm_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_QCA + qca_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_AG6XX + ag6xx_deinit(); +#endif +#ifdef CONFIG_BT_HCIUART_MRVL + mrvl_deinit(); +#endif + + tty_unregister_ldisc(&hci_uart_ldisc); +} + +module_init(hci_uart_init); +module_exit(hci_uart_exit); + +MODULE_AUTHOR("Marcel Holtmann "); +MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_LDISC(N_HCI); -- cgit v1.2.3