From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/bus/omap_l3_noc.c | 374 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+) create mode 100644 drivers/bus/omap_l3_noc.c (limited to 'drivers/bus/omap_l3_noc.c') diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c new file mode 100644 index 0000000000..eb1ba6319f --- /dev/null +++ b/drivers/bus/omap_l3_noc.c @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * OMAP L3 Interconnect error handling driver + * + * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/ + * Santosh Shilimkar + * Sricharan + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap_l3_noc.h" + +/** + * l3_handle_target() - Handle Target specific parse and reporting + * @l3: pointer to l3 struct + * @base: base address of clkdm + * @flag_mux: flagmux corresponding to the event + * @err_src: error source index of the slave (target) + * + * This does the second part of the error interrupt handling: + * 3) Parse in the slave information + * 4) Print the logged information. + * 5) Add dump stack to provide kernel trace. + * 6) Clear the source if known. + * + * This handles two types of errors: + * 1) Custom errors in L3 : + * Target like DMM/FW/EMIF generates SRESP=ERR error + * 2) Standard L3 error: + * - Unsupported CMD. + * L3 tries to access target while it is idle + * - OCP disconnect. + * - Address hole error: + * If DSS/ISS/FDIF/USBHOSTFS access a target where they + * do not have connectivity, the error is logged in + * their default target which is DMM2. + * + * On High Secure devices, firewall errors are possible and those + * can be trapped as well. But the trapping is implemented as part + * secure software and hence need not be implemented here. + */ +static int l3_handle_target(struct omap_l3 *l3, void __iomem *base, + struct l3_flagmux_data *flag_mux, int err_src) +{ + int k; + u32 std_err_main, clear, masterid; + u8 op_code, m_req_info; + void __iomem *l3_targ_base; + void __iomem *l3_targ_stderr, *l3_targ_slvofslsb, *l3_targ_mstaddr; + void __iomem *l3_targ_hdr, *l3_targ_info; + struct l3_target_data *l3_targ_inst; + struct l3_masters_data *master; + char *target_name, *master_name = "UN IDENTIFIED"; + char *err_description; + char err_string[30] = { 0 }; + char info_string[60] = { 0 }; + + /* We DONOT expect err_src to go out of bounds */ + BUG_ON(err_src > MAX_CLKDM_TARGETS); + + if (err_src < flag_mux->num_targ_data) { + l3_targ_inst = &flag_mux->l3_targ[err_src]; + target_name = l3_targ_inst->name; + l3_targ_base = base + l3_targ_inst->offset; + } else { + target_name = L3_TARGET_NOT_SUPPORTED; + } + + if (target_name == L3_TARGET_NOT_SUPPORTED) + return -ENODEV; + + /* Read the stderrlog_main_source from clk domain */ + l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN; + l3_targ_slvofslsb = l3_targ_base + L3_TARG_STDERRLOG_SLVOFSLSB; + + std_err_main = readl_relaxed(l3_targ_stderr); + + switch (std_err_main & CUSTOM_ERROR) { + case STANDARD_ERROR: + err_description = "Standard"; + snprintf(err_string, sizeof(err_string), + ": At Address: 0x%08X ", + readl_relaxed(l3_targ_slvofslsb)); + + l3_targ_mstaddr = l3_targ_base + L3_TARG_STDERRLOG_MSTADDR; + l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_HDR; + l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_INFO; + break; + + case CUSTOM_ERROR: + err_description = "Custom"; + + l3_targ_mstaddr = l3_targ_base + + L3_TARG_STDERRLOG_CINFO_MSTADDR; + l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_CINFO_OPCODE; + l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_CINFO_INFO; + break; + + default: + /* Nothing to be handled here as of now */ + return 0; + } + + /* STDERRLOG_MSTADDR Stores the NTTP master address. */ + masterid = (readl_relaxed(l3_targ_mstaddr) & + l3->mst_addr_mask) >> __ffs(l3->mst_addr_mask); + + for (k = 0, master = l3->l3_masters; k < l3->num_masters; + k++, master++) { + if (masterid == master->id) { + master_name = master->name; + break; + } + } + + op_code = readl_relaxed(l3_targ_hdr) & 0x7; + + m_req_info = readl_relaxed(l3_targ_info) & 0xF; + snprintf(info_string, sizeof(info_string), + ": %s in %s mode during %s access", + (m_req_info & BIT(0)) ? "Opcode Fetch" : "Data Access", + (m_req_info & BIT(1)) ? "Supervisor" : "User", + (m_req_info & BIT(3)) ? "Debug" : "Functional"); + + WARN(true, + "%s:L3 %s Error: MASTER %s TARGET %s (%s)%s%s\n", + dev_name(l3->dev), + err_description, + master_name, target_name, + l3_transaction_type[op_code], + err_string, info_string); + + /* clear the std error log*/ + clear = std_err_main | CLEAR_STDERR_LOG; + writel_relaxed(clear, l3_targ_stderr); + + return 0; +} + +/** + * l3_interrupt_handler() - interrupt handler for l3 events + * @irq: irq number + * @_l3: pointer to l3 structure + * + * Interrupt Handler for L3 error detection. + * 1) Identify the L3 clockdomain partition to which the error belongs to. + * 2) Identify the slave where the error information is logged + * ... handle the slave event.. + * 7) if the slave is unknown, mask out the slave. + */ +static irqreturn_t l3_interrupt_handler(int irq, void *_l3) +{ + struct omap_l3 *l3 = _l3; + int inttype, i, ret; + int err_src = 0; + u32 err_reg, mask_val; + void __iomem *base, *mask_reg; + struct l3_flagmux_data *flag_mux; + + /* Get the Type of interrupt */ + inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; + + for (i = 0; i < l3->num_modules; i++) { + /* + * Read the regerr register of the clock domain + * to determine the source + */ + base = l3->l3_base[i]; + flag_mux = l3->l3_flagmux[i]; + err_reg = readl_relaxed(base + flag_mux->offset + + L3_FLAGMUX_REGERR0 + (inttype << 3)); + + err_reg &= ~(inttype ? flag_mux->mask_app_bits : + flag_mux->mask_dbg_bits); + + /* Get the corresponding error and analyse */ + if (err_reg) { + /* Identify the source from control status register */ + err_src = __ffs(err_reg); + + ret = l3_handle_target(l3, base, flag_mux, err_src); + + /* + * Certain plaforms may have "undocumented" status + * pending on boot. So dont generate a severe warning + * here. Just mask it off to prevent the error from + * reoccuring and locking up the system. + */ + if (ret) { + dev_err(l3->dev, + "L3 %s error: target %d mod:%d %s\n", + inttype ? "debug" : "application", + err_src, i, "(unclearable)"); + + mask_reg = base + flag_mux->offset + + L3_FLAGMUX_MASK0 + (inttype << 3); + mask_val = readl_relaxed(mask_reg); + mask_val &= ~(1 << err_src); + writel_relaxed(mask_val, mask_reg); + + /* Mark these bits as to be ignored */ + if (inttype) + flag_mux->mask_app_bits |= 1 << err_src; + else + flag_mux->mask_dbg_bits |= 1 << err_src; + } + + /* Error found so break the for loop */ + return IRQ_HANDLED; + } + } + + dev_err(l3->dev, "L3 %s IRQ not handled!!\n", + inttype ? "debug" : "application"); + + return IRQ_NONE; +} + +static const struct of_device_id l3_noc_match[] = { + {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data}, + {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data}, + {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data}, + {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data}, + {}, +}; +MODULE_DEVICE_TABLE(of, l3_noc_match); + +static int omap_l3_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + static struct omap_l3 *l3; + int ret, i, res_idx; + + of_id = of_match_device(l3_noc_match, &pdev->dev); + if (!of_id) { + dev_err(&pdev->dev, "OF data missing\n"); + return -EINVAL; + } + + l3 = devm_kzalloc(&pdev->dev, sizeof(*l3), GFP_KERNEL); + if (!l3) + return -ENOMEM; + + memcpy(l3, of_id->data, sizeof(*l3)); + l3->dev = &pdev->dev; + platform_set_drvdata(pdev, l3); + + /* Get mem resources */ + for (i = 0, res_idx = 0; i < l3->num_modules; i++) { + struct resource *res; + + if (l3->l3_base[i] == L3_BASE_IS_SUBMODULE) { + /* First entry cannot be submodule */ + BUG_ON(i == 0); + l3->l3_base[i] = l3->l3_base[i - 1]; + continue; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, res_idx); + l3->l3_base[i] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(l3->l3_base[i])) { + dev_err(l3->dev, "ioremap %d failed\n", i); + return PTR_ERR(l3->l3_base[i]); + } + res_idx++; + } + + /* + * Setup interrupt Handlers + */ + l3->debug_irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler, + IRQF_NO_THREAD, "l3-dbg-irq", l3); + if (ret) { + dev_err(l3->dev, "request_irq failed for %d\n", + l3->debug_irq); + return ret; + } + + l3->app_irq = platform_get_irq(pdev, 1); + ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler, + IRQF_NO_THREAD, "l3-app-irq", l3); + if (ret) + dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP + +/** + * l3_resume_noirq() - resume function for l3_noc + * @dev: pointer to l3_noc device structure + * + * We only have the resume handler only since we + * have already maintained the delta register + * configuration as part of configuring the system + */ +static int l3_resume_noirq(struct device *dev) +{ + struct omap_l3 *l3 = dev_get_drvdata(dev); + int i; + struct l3_flagmux_data *flag_mux; + void __iomem *base, *mask_regx = NULL; + u32 mask_val; + + for (i = 0; i < l3->num_modules; i++) { + base = l3->l3_base[i]; + flag_mux = l3->l3_flagmux[i]; + if (!flag_mux->mask_app_bits && !flag_mux->mask_dbg_bits) + continue; + + mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 + + (L3_APPLICATION_ERROR << 3); + mask_val = readl_relaxed(mask_regx); + mask_val &= ~(flag_mux->mask_app_bits); + + writel_relaxed(mask_val, mask_regx); + mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 + + (L3_DEBUG_ERROR << 3); + mask_val = readl_relaxed(mask_regx); + mask_val &= ~(flag_mux->mask_dbg_bits); + + writel_relaxed(mask_val, mask_regx); + } + + /* Dummy read to force OCP barrier */ + if (mask_regx) + (void)readl(mask_regx); + + return 0; +} + +static const struct dev_pm_ops l3_dev_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq) +}; + +#define L3_DEV_PM_OPS (&l3_dev_pm_ops) +#else +#define L3_DEV_PM_OPS NULL +#endif + +static struct platform_driver omap_l3_driver = { + .probe = omap_l3_probe, + .driver = { + .name = "omap_l3_noc", + .pm = L3_DEV_PM_OPS, + .of_match_table = of_match_ptr(l3_noc_match), + }, +}; + +static int __init omap_l3_init(void) +{ + return platform_driver_register(&omap_l3_driver); +} +postcore_initcall_sync(omap_l3_init); + +static void __exit omap_l3_exit(void) +{ + platform_driver_unregister(&omap_l3_driver); +} +module_exit(omap_l3_exit); + +MODULE_AUTHOR("Santosh Shilimkar"); +MODULE_AUTHOR("Sricharan R"); +MODULE_DESCRIPTION("OMAP L3 Interconnect error handling driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3