From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/char/ipmi/Kconfig | 190 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 drivers/char/ipmi/Kconfig (limited to 'drivers/char/ipmi/Kconfig') diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig new file mode 100644 index 0000000000..f4adc6feb3 --- /dev/null +++ b/drivers/char/ipmi/Kconfig @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# IPMI device configuration +# + +menuconfig IPMI_HANDLER + tristate 'IPMI top-level message handler' + depends on HAS_IOMEM + select IPMI_DMI_DECODE if DMI + help + This enables the central IPMI message handler, required for IPMI + to work. + + IPMI is a standard for managing sensors (temperature, + voltage, etc.) in a system. + + See for more details on the driver. + + If unsure, say N. + +config IPMI_DMI_DECODE + select IPMI_PLAT_DATA + bool + +config IPMI_PLAT_DATA + bool + +if IPMI_HANDLER + +config IPMI_PANIC_EVENT + bool 'Generate a panic event to all BMCs on a panic' + help + When a panic occurs, this will cause the IPMI message handler to, + by default, generate an IPMI event describing the panic to each + interface registered with the message handler. This is always + available, the module parameter for ipmi_msghandler named + panic_op can be set to "event" to chose this value, this config + simply causes the default value to be set to "event". + +config IPMI_PANIC_STRING + bool 'Generate OEM events containing the panic string' + depends on IPMI_PANIC_EVENT + help + When a panic occurs, this will cause the IPMI message handler to, + by default, generate IPMI OEM type f0 events holding the IPMB + address of the panic generator (byte 4 of the event), a sequence + number for the string (byte 5 of the event) and part of the + string (the rest of the event). Bytes 1, 2, and 3 are the normal + usage for an OEM event. You can fetch these events and use the + sequence numbers to piece the string together. This config + parameter sets the default value to generate these events, + the module parameter for ipmi_msghandler named panic_op can + be set to "string" to chose this value, this config simply + causes the default value to be set to "string". + +config IPMI_DEVICE_INTERFACE + tristate 'Device interface for IPMI' + help + This provides an IOCTL interface to the IPMI message handler so + userland processes may use IPMI. It supports poll() and select(). + +config IPMI_SI + tristate 'IPMI System Interface handler' + select IPMI_PLAT_DATA + help + Provides a driver for System Interfaces (KCS, SMIC, BT). + Currently, only KCS and SMIC are supported. If + you are using IPMI, you should probably say "y" here. + +config IPMI_SSIF + tristate 'IPMI SMBus handler (SSIF)' + depends on I2C + help + Provides a driver for a SMBus interface to a BMC, meaning that you + have a driver that must be accessed over an I2C bus instead of a + standard interface. This module requires I2C support. + +config IPMI_IPMB + tristate 'IPMI IPMB interface' + depends on I2C && I2C_SLAVE + help + Provides a driver for a system running right on the IPMB bus. + It supports normal system interface messages to a BMC on the IPMB + bus, and it also supports direct messaging on the bus using + IPMB direct messages. This module requires I2C support. + +config IPMI_POWERNV + depends on PPC_POWERNV + tristate 'POWERNV (OPAL firmware) IPMI interface' + help + Provides a driver for OPAL firmware-based IPMI interfaces. + +config IPMI_WATCHDOG + tristate 'IPMI Watchdog Timer' + help + This enables the IPMI watchdog timer. + +config IPMI_POWEROFF + tristate 'IPMI Poweroff' + help + This enables a function to power off the system with IPMI if + the IPMI management controller is capable of this. + +endif # IPMI_HANDLER + +config IPMI_KCS_BMC + tristate + +config ASPEED_KCS_IPMI_BMC + depends on ARCH_ASPEED || COMPILE_TEST + select IPMI_KCS_BMC + select REGMAP_MMIO + tristate "Aspeed KCS IPMI BMC driver" + help + Provides a driver for the KCS (Keyboard Controller Style) IPMI + interface found on Aspeed SOCs (AST2400 and AST2500). + + The driver implements the BMC side of the KCS contorller, it + provides the access of KCS IO space for BMC side. + +config NPCM7XX_KCS_IPMI_BMC + depends on ARCH_NPCM || COMPILE_TEST + select IPMI_KCS_BMC + select REGMAP_MMIO + tristate "NPCM KCS IPMI BMC driver" + help + Provides a driver for the KCS (Keyboard Controller Style) IPMI + interface found on Nuvoton NPCM SOCs. + + The driver implements the BMC side of the KCS contorller, it + provides the access of KCS IO space for BMC side. + + This support is also available as a module. If so, the module + will be called kcs_bmc_npcm7xx. + +config IPMI_KCS_BMC_CDEV_IPMI + depends on IPMI_KCS_BMC + tristate "IPMI character device interface for BMC KCS devices" + help + Provides a BMC-side character device implementing IPMI + semantics for KCS IPMI devices. + + Say YES if you wish to expose KCS devices on the BMC for IPMI + purposes. + + This support is also available as a module. The module will be + called kcs_bmc_cdev_ipmi. + +config IPMI_KCS_BMC_SERIO + depends on IPMI_KCS_BMC && SERIO + tristate "SerIO adaptor for BMC KCS devices" + help + Adapts the BMC KCS device for the SerIO subsystem. This allows users + to take advantage of userspace interfaces provided by SerIO where + appropriate. + + Say YES if you wish to expose KCS devices on the BMC via SerIO + interfaces. + + This support is also available as a module. The module will be + called kcs_bmc_serio. + +config ASPEED_BT_IPMI_BMC + depends on ARCH_ASPEED || COMPILE_TEST + depends on MFD_SYSCON + select REGMAP_MMIO + tristate "BT IPMI bmc driver" + help + Provides a driver for the BT (Block Transfer) IPMI interface + found on Aspeed SOCs (AST2400 and AST2500). The driver + implements the BMC side of the BT interface. + +config SSIF_IPMI_BMC + tristate "SSIF IPMI BMC driver" + depends on I2C && I2C_SLAVE + help + This enables the IPMI SMBus system interface (SSIF) at the + management (BMC) side. + + The driver implements the BMC side of the SMBus system + interface (SSIF). + +config IPMB_DEVICE_INTERFACE + tristate 'IPMB Interface handler' + depends on I2C + depends on I2C_SLAVE + help + Provides a driver for a device (Satellite MC) to + receive requests and send responses back to the BMC via + the IPMB interface. This module requires I2C support. -- cgit v1.2.3