From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/crypto/bcm/cipher.c | 4771 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4771 insertions(+) create mode 100644 drivers/crypto/bcm/cipher.c (limited to 'drivers/crypto/bcm/cipher.c') diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c new file mode 100644 index 0000000000..689be70d69 --- /dev/null +++ b/drivers/crypto/bcm/cipher.c @@ -0,0 +1,4771 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 Broadcom + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "util.h" +#include "cipher.h" +#include "spu.h" +#include "spum.h" +#include "spu2.h" + +/* ================= Device Structure ================== */ + +struct bcm_device_private iproc_priv; + +/* ==================== Parameters ===================== */ + +int flow_debug_logging; +module_param(flow_debug_logging, int, 0644); +MODULE_PARM_DESC(flow_debug_logging, "Enable Flow Debug Logging"); + +int packet_debug_logging; +module_param(packet_debug_logging, int, 0644); +MODULE_PARM_DESC(packet_debug_logging, "Enable Packet Debug Logging"); + +int debug_logging_sleep; +module_param(debug_logging_sleep, int, 0644); +MODULE_PARM_DESC(debug_logging_sleep, "Packet Debug Logging Sleep"); + +/* + * The value of these module parameters is used to set the priority for each + * algo type when this driver registers algos with the kernel crypto API. + * To use a priority other than the default, set the priority in the insmod or + * modprobe. Changing the module priority after init time has no effect. + * + * The default priorities are chosen to be lower (less preferred) than ARMv8 CE + * algos, but more preferred than generic software algos. + */ +static int cipher_pri = 150; +module_param(cipher_pri, int, 0644); +MODULE_PARM_DESC(cipher_pri, "Priority for cipher algos"); + +static int hash_pri = 100; +module_param(hash_pri, int, 0644); +MODULE_PARM_DESC(hash_pri, "Priority for hash algos"); + +static int aead_pri = 150; +module_param(aead_pri, int, 0644); +MODULE_PARM_DESC(aead_pri, "Priority for AEAD algos"); + +/* A type 3 BCM header, expected to precede the SPU header for SPU-M. + * Bits 3 and 4 in the first byte encode the channel number (the dma ringset). + * 0x60 - ring 0 + * 0x68 - ring 1 + * 0x70 - ring 2 + * 0x78 - ring 3 + */ +static char BCMHEADER[] = { 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28 }; +/* + * Some SPU hw does not use BCM header on SPU messages. So BCM_HDR_LEN + * is set dynamically after reading SPU type from device tree. + */ +#define BCM_HDR_LEN iproc_priv.bcm_hdr_len + +/* min and max time to sleep before retrying when mbox queue is full. usec */ +#define MBOX_SLEEP_MIN 800 +#define MBOX_SLEEP_MAX 1000 + +/** + * select_channel() - Select a SPU channel to handle a crypto request. Selects + * channel in round robin order. + * + * Return: channel index + */ +static u8 select_channel(void) +{ + u8 chan_idx = atomic_inc_return(&iproc_priv.next_chan); + + return chan_idx % iproc_priv.spu.num_chan; +} + +/** + * spu_skcipher_rx_sg_create() - Build up the scatterlist of buffers used to + * receive a SPU response message for an skcipher request. Includes buffers to + * catch SPU message headers and the response data. + * @mssg: mailbox message containing the receive sg + * @rctx: crypto request context + * @rx_frag_num: number of scatterlist elements required to hold the + * SPU response message + * @chunksize: Number of bytes of response data expected + * @stat_pad_len: Number of bytes required to pad the STAT field to + * a 4-byte boundary + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Returns: + * 0 if successful + * < 0 if an error + */ +static int +spu_skcipher_rx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 rx_frag_num, + unsigned int chunksize, u32 stat_pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of response data expected */ + + mssg->spu.dst = kcalloc(rx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.dst) + return -ENOMEM; + + sg = mssg->spu.dst; + sg_init_table(sg, rx_frag_num); + /* Space for SPU message header */ + sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len); + + /* If XTS tweak in payload, add buffer to receive encrypted tweak */ + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + sg_set_buf(sg++, rctx->msg_buf.c.supdt_tweak, + SPU_XTS_TWEAK_SIZE); + + /* Copy in each dst sg entry from request, up to chunksize */ + datalen = spu_msg_sg_add(&sg, &rctx->dst_sg, &rctx->dst_skip, + rctx->dst_nents, chunksize); + if (datalen < chunksize) { + pr_err("%s(): failed to copy dst sg to mbox msg. chunksize %u, datalen %u", + __func__, chunksize, datalen); + return -EFAULT; + } + + if (stat_pad_len) + sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); + + memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN); + sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len()); + + return 0; +} + +/** + * spu_skcipher_tx_sg_create() - Build up the scatterlist of buffers used to + * send a SPU request message for an skcipher request. Includes SPU message + * headers and the request data. + * @mssg: mailbox message containing the transmit sg + * @rctx: crypto request context + * @tx_frag_num: number of scatterlist elements required to construct the + * SPU request message + * @chunksize: Number of bytes of request data + * @pad_len: Number of pad bytes + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Returns: + * 0 if successful + * < 0 if an error + */ +static int +spu_skcipher_tx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 tx_frag_num, unsigned int chunksize, u32 pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of response data expected */ + u32 stat_len; + + mssg->spu.src = kcalloc(tx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (unlikely(!mssg->spu.src)) + return -ENOMEM; + + sg = mssg->spu.src; + sg_init_table(sg, tx_frag_num); + + sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr, + BCM_HDR_LEN + ctx->spu_req_hdr_len); + + /* if XTS tweak in payload, copy from IV (where crypto API puts it) */ + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + sg_set_buf(sg++, rctx->msg_buf.iv_ctr, SPU_XTS_TWEAK_SIZE); + + /* Copy in each src sg entry from request, up to chunksize */ + datalen = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip, + rctx->src_nents, chunksize); + if (unlikely(datalen < chunksize)) { + pr_err("%s(): failed to copy src sg to mbox msg", + __func__); + return -EFAULT; + } + + if (pad_len) + sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len); + + stat_len = spu->spu_tx_status_len(); + if (stat_len) { + memset(rctx->msg_buf.tx_stat, 0, stat_len); + sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len); + } + return 0; +} + +static int mailbox_send_message(struct brcm_message *mssg, u32 flags, + u8 chan_idx) +{ + int err; + int retry_cnt = 0; + struct device *dev = &(iproc_priv.pdev->dev); + + err = mbox_send_message(iproc_priv.mbox[chan_idx], mssg); + if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) { + while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) { + /* + * Mailbox queue is full. Since MAY_SLEEP is set, assume + * not in atomic context and we can wait and try again. + */ + retry_cnt++; + usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX); + err = mbox_send_message(iproc_priv.mbox[chan_idx], + mssg); + atomic_inc(&iproc_priv.mb_no_spc); + } + } + if (err < 0) { + atomic_inc(&iproc_priv.mb_send_fail); + return err; + } + + /* Check error returned by mailbox controller */ + err = mssg->error; + if (unlikely(err < 0)) { + dev_err(dev, "message error %d", err); + /* Signal txdone for mailbox channel */ + } + + /* Signal txdone for mailbox channel */ + mbox_client_txdone(iproc_priv.mbox[chan_idx], err); + return err; +} + +/** + * handle_skcipher_req() - Submit as much of a block cipher request as fits in + * a single SPU request message, starting at the current position in the request + * data. + * @rctx: Crypto request context + * + * This may be called on the crypto API thread, or, when a request is so large + * it must be broken into multiple SPU messages, on the thread used to invoke + * the response callback. When requests are broken into multiple SPU + * messages, we assume subsequent messages depend on previous results, and + * thus always wait for previous results before submitting the next message. + * Because requests are submitted in lock step like this, there is no need + * to synchronize access to request data structures. + * + * Return: -EINPROGRESS: request has been accepted and result will be returned + * asynchronously + * Any other value indicates an error + */ +static int handle_skcipher_req(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct skcipher_request *req = + container_of(areq, struct skcipher_request, base); + struct iproc_ctx_s *ctx = rctx->ctx; + struct spu_cipher_parms cipher_parms; + int err; + unsigned int chunksize; /* Num bytes of request to submit */ + int remaining; /* Bytes of request still to process */ + int chunk_start; /* Beginning of data for current SPU msg */ + + /* IV or ctr value to use in this SPU msg */ + u8 local_iv_ctr[MAX_IV_SIZE]; + u32 stat_pad_len; /* num bytes to align status field */ + u32 pad_len; /* total length of all padding */ + struct brcm_message *mssg; /* mailbox message */ + + /* number of entries in src and dst sg in mailbox message. */ + u8 rx_frag_num = 2; /* response header and STATUS */ + u8 tx_frag_num = 1; /* request header */ + + flow_log("%s\n", __func__); + + cipher_parms.alg = ctx->cipher.alg; + cipher_parms.mode = ctx->cipher.mode; + cipher_parms.type = ctx->cipher_type; + cipher_parms.key_len = ctx->enckeylen; + cipher_parms.key_buf = ctx->enckey; + cipher_parms.iv_buf = local_iv_ctr; + cipher_parms.iv_len = rctx->iv_ctr_len; + + mssg = &rctx->mb_mssg; + chunk_start = rctx->src_sent; + remaining = rctx->total_todo - chunk_start; + + /* determine the chunk we are breaking off and update the indexes */ + if ((ctx->max_payload != SPU_MAX_PAYLOAD_INF) && + (remaining > ctx->max_payload)) + chunksize = ctx->max_payload; + else + chunksize = remaining; + + rctx->src_sent += chunksize; + rctx->total_sent = rctx->src_sent; + + /* Count number of sg entries to be included in this request */ + rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, chunksize); + rctx->dst_nents = spu_sg_count(rctx->dst_sg, rctx->dst_skip, chunksize); + + if ((ctx->cipher.mode == CIPHER_MODE_CBC) && + rctx->is_encrypt && chunk_start) + /* + * Encrypting non-first first chunk. Copy last block of + * previous result to IV for this chunk. + */ + sg_copy_part_to_buf(req->dst, rctx->msg_buf.iv_ctr, + rctx->iv_ctr_len, + chunk_start - rctx->iv_ctr_len); + + if (rctx->iv_ctr_len) { + /* get our local copy of the iv */ + __builtin_memcpy(local_iv_ctr, rctx->msg_buf.iv_ctr, + rctx->iv_ctr_len); + + /* generate the next IV if possible */ + if ((ctx->cipher.mode == CIPHER_MODE_CBC) && + !rctx->is_encrypt) { + /* + * CBC Decrypt: next IV is the last ciphertext block in + * this chunk + */ + sg_copy_part_to_buf(req->src, rctx->msg_buf.iv_ctr, + rctx->iv_ctr_len, + rctx->src_sent - rctx->iv_ctr_len); + } else if (ctx->cipher.mode == CIPHER_MODE_CTR) { + /* + * The SPU hardware increments the counter once for + * each AES block of 16 bytes. So update the counter + * for the next chunk, if there is one. Note that for + * this chunk, the counter has already been copied to + * local_iv_ctr. We can assume a block size of 16, + * because we only support CTR mode for AES, not for + * any other cipher alg. + */ + add_to_ctr(rctx->msg_buf.iv_ctr, chunksize >> 4); + } + } + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + flow_log("max_payload infinite\n"); + else + flow_log("max_payload %u\n", ctx->max_payload); + + flow_log("sent:%u start:%u remains:%u size:%u\n", + rctx->src_sent, chunk_start, remaining, chunksize); + + /* Copy SPU header template created at setkey time */ + memcpy(rctx->msg_buf.bcm_spu_req_hdr, ctx->bcm_spu_req_hdr, + sizeof(rctx->msg_buf.bcm_spu_req_hdr)); + + spu->spu_cipher_req_finish(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + ctx->spu_req_hdr_len, !(rctx->is_encrypt), + &cipher_parms, chunksize); + + atomic64_add(chunksize, &iproc_priv.bytes_out); + + stat_pad_len = spu->spu_wordalign_padlen(chunksize); + if (stat_pad_len) + rx_frag_num++; + pad_len = stat_pad_len; + if (pad_len) { + tx_frag_num++; + spu->spu_request_pad(rctx->msg_buf.spu_req_pad, 0, + 0, ctx->auth.alg, ctx->auth.mode, + rctx->total_sent, stat_pad_len); + } + + spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + ctx->spu_req_hdr_len); + packet_log("payload:\n"); + dump_sg(rctx->src_sg, rctx->src_skip, chunksize); + packet_dump(" pad: ", rctx->msg_buf.spu_req_pad, pad_len); + + /* + * Build mailbox message containing SPU request msg and rx buffers + * to catch response message + */ + memset(mssg, 0, sizeof(*mssg)); + mssg->type = BRCM_MESSAGE_SPU; + mssg->ctx = rctx; /* Will be returned in response */ + + /* Create rx scatterlist to catch result */ + rx_frag_num += rctx->dst_nents; + + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + rx_frag_num++; /* extra sg to insert tweak */ + + err = spu_skcipher_rx_sg_create(mssg, rctx, rx_frag_num, chunksize, + stat_pad_len); + if (err) + return err; + + /* Create tx scatterlist containing SPU request message */ + tx_frag_num += rctx->src_nents; + if (spu->spu_tx_status_len()) + tx_frag_num++; + + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + tx_frag_num++; /* extra sg to insert tweak */ + + err = spu_skcipher_tx_sg_create(mssg, rctx, tx_frag_num, chunksize, + pad_len); + if (err) + return err; + + err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx); + if (unlikely(err < 0)) + return err; + + return -EINPROGRESS; +} + +/** + * handle_skcipher_resp() - Process a block cipher SPU response. Updates the + * total received count for the request and updates global stats. + * @rctx: Crypto request context + */ +static void handle_skcipher_resp(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct skcipher_request *req = skcipher_request_cast(areq); + struct iproc_ctx_s *ctx = rctx->ctx; + u32 payload_len; + + /* See how much data was returned */ + payload_len = spu->spu_payload_length(rctx->msg_buf.spu_resp_hdr); + + /* + * In XTS mode, the first SPU_XTS_TWEAK_SIZE bytes may be the + * encrypted tweak ("i") value; we don't count those. + */ + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload() && + (payload_len >= SPU_XTS_TWEAK_SIZE)) + payload_len -= SPU_XTS_TWEAK_SIZE; + + atomic64_add(payload_len, &iproc_priv.bytes_in); + + flow_log("%s() offset: %u, bd_len: %u BD:\n", + __func__, rctx->total_received, payload_len); + + dump_sg(req->dst, rctx->total_received, payload_len); + + rctx->total_received += payload_len; + if (rctx->total_received == rctx->total_todo) { + atomic_inc(&iproc_priv.op_counts[SPU_OP_CIPHER]); + atomic_inc( + &iproc_priv.cipher_cnt[ctx->cipher.alg][ctx->cipher.mode]); + } +} + +/** + * spu_ahash_rx_sg_create() - Build up the scatterlist of buffers used to + * receive a SPU response message for an ahash request. + * @mssg: mailbox message containing the receive sg + * @rctx: crypto request context + * @rx_frag_num: number of scatterlist elements required to hold the + * SPU response message + * @digestsize: length of hash digest, in bytes + * @stat_pad_len: Number of bytes required to pad the STAT field to + * a 4-byte boundary + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Return: + * 0 if successful + * < 0 if an error + */ +static int +spu_ahash_rx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 rx_frag_num, unsigned int digestsize, + u32 stat_pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + + mssg->spu.dst = kcalloc(rx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.dst) + return -ENOMEM; + + sg = mssg->spu.dst; + sg_init_table(sg, rx_frag_num); + /* Space for SPU message header */ + sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len); + + /* Space for digest */ + sg_set_buf(sg++, rctx->msg_buf.digest, digestsize); + + if (stat_pad_len) + sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); + + memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN); + sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len()); + return 0; +} + +/** + * spu_ahash_tx_sg_create() - Build up the scatterlist of buffers used to send + * a SPU request message for an ahash request. Includes SPU message headers and + * the request data. + * @mssg: mailbox message containing the transmit sg + * @rctx: crypto request context + * @tx_frag_num: number of scatterlist elements required to construct the + * SPU request message + * @spu_hdr_len: length in bytes of SPU message header + * @hash_carry_len: Number of bytes of data carried over from previous req + * @new_data_len: Number of bytes of new request data + * @pad_len: Number of pad bytes + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Return: + * 0 if successful + * < 0 if an error + */ +static int +spu_ahash_tx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 tx_frag_num, + u32 spu_hdr_len, + unsigned int hash_carry_len, + unsigned int new_data_len, u32 pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + u32 datalen; /* Number of bytes of response data expected */ + u32 stat_len; + + mssg->spu.src = kcalloc(tx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.src) + return -ENOMEM; + + sg = mssg->spu.src; + sg_init_table(sg, tx_frag_num); + + sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr, + BCM_HDR_LEN + spu_hdr_len); + + if (hash_carry_len) + sg_set_buf(sg++, rctx->hash_carry, hash_carry_len); + + if (new_data_len) { + /* Copy in each src sg entry from request, up to chunksize */ + datalen = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip, + rctx->src_nents, new_data_len); + if (datalen < new_data_len) { + pr_err("%s(): failed to copy src sg to mbox msg", + __func__); + return -EFAULT; + } + } + + if (pad_len) + sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len); + + stat_len = spu->spu_tx_status_len(); + if (stat_len) { + memset(rctx->msg_buf.tx_stat, 0, stat_len); + sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len); + } + + return 0; +} + +/** + * handle_ahash_req() - Process an asynchronous hash request from the crypto + * API. + * @rctx: Crypto request context + * + * Builds a SPU request message embedded in a mailbox message and submits the + * mailbox message on a selected mailbox channel. The SPU request message is + * constructed as a scatterlist, including entries from the crypto API's + * src scatterlist to avoid copying the data to be hashed. This function is + * called either on the thread from the crypto API, or, in the case that the + * crypto API request is too large to fit in a single SPU request message, + * on the thread that invokes the receive callback with a response message. + * Because some operations require the response from one chunk before the next + * chunk can be submitted, we always wait for the response for the previous + * chunk before submitting the next chunk. Because requests are submitted in + * lock step like this, there is no need to synchronize access to request data + * structures. + * + * Return: + * -EINPROGRESS: request has been submitted to SPU and response will be + * returned asynchronously + * -EAGAIN: non-final request included a small amount of data, which for + * efficiency we did not submit to the SPU, but instead stored + * to be submitted to the SPU with the next part of the request + * other: an error code + */ +static int handle_ahash_req(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct ahash_request *req = ahash_request_cast(areq); + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req); + struct crypto_tfm *tfm = crypto_ahash_tfm(ahash); + unsigned int blocksize = crypto_tfm_alg_blocksize(tfm); + struct iproc_ctx_s *ctx = rctx->ctx; + + /* number of bytes still to be hashed in this req */ + unsigned int nbytes_to_hash = 0; + int err; + unsigned int chunksize = 0; /* length of hash carry + new data */ + /* + * length of new data, not from hash carry, to be submitted in + * this hw request + */ + unsigned int new_data_len; + + unsigned int __maybe_unused chunk_start = 0; + u32 db_size; /* Length of data field, incl gcm and hash padding */ + int pad_len = 0; /* total pad len, including gcm, hash, stat padding */ + u32 data_pad_len = 0; /* length of GCM/CCM padding */ + u32 stat_pad_len = 0; /* length of padding to align STATUS word */ + struct brcm_message *mssg; /* mailbox message */ + struct spu_request_opts req_opts; + struct spu_cipher_parms cipher_parms; + struct spu_hash_parms hash_parms; + struct spu_aead_parms aead_parms; + unsigned int local_nbuf; + u32 spu_hdr_len; + unsigned int digestsize; + u16 rem = 0; + + /* + * number of entries in src and dst sg. Always includes SPU msg header. + * rx always includes a buffer to catch digest and STATUS. + */ + u8 rx_frag_num = 3; + u8 tx_frag_num = 1; + + flow_log("total_todo %u, total_sent %u\n", + rctx->total_todo, rctx->total_sent); + + memset(&req_opts, 0, sizeof(req_opts)); + memset(&cipher_parms, 0, sizeof(cipher_parms)); + memset(&hash_parms, 0, sizeof(hash_parms)); + memset(&aead_parms, 0, sizeof(aead_parms)); + + req_opts.bd_suppress = true; + hash_parms.alg = ctx->auth.alg; + hash_parms.mode = ctx->auth.mode; + hash_parms.type = HASH_TYPE_NONE; + hash_parms.key_buf = (u8 *)ctx->authkey; + hash_parms.key_len = ctx->authkeylen; + + /* + * For hash algorithms below assignment looks bit odd but + * it's needed for AES-XCBC and AES-CMAC hash algorithms + * to differentiate between 128, 192, 256 bit key values. + * Based on the key values, hash algorithm is selected. + * For example for 128 bit key, hash algorithm is AES-128. + */ + cipher_parms.type = ctx->cipher_type; + + mssg = &rctx->mb_mssg; + chunk_start = rctx->src_sent; + + /* + * Compute the amount remaining to hash. This may include data + * carried over from previous requests. + */ + nbytes_to_hash = rctx->total_todo - rctx->total_sent; + chunksize = nbytes_to_hash; + if ((ctx->max_payload != SPU_MAX_PAYLOAD_INF) && + (chunksize > ctx->max_payload)) + chunksize = ctx->max_payload; + + /* + * If this is not a final request and the request data is not a multiple + * of a full block, then simply park the extra data and prefix it to the + * data for the next request. + */ + if (!rctx->is_final) { + u8 *dest = rctx->hash_carry + rctx->hash_carry_len; + u16 new_len; /* len of data to add to hash carry */ + + rem = chunksize % blocksize; /* remainder */ + if (rem) { + /* chunksize not a multiple of blocksize */ + chunksize -= rem; + if (chunksize == 0) { + /* Don't have a full block to submit to hw */ + new_len = rem - rctx->hash_carry_len; + sg_copy_part_to_buf(req->src, dest, new_len, + rctx->src_sent); + rctx->hash_carry_len = rem; + flow_log("Exiting with hash carry len: %u\n", + rctx->hash_carry_len); + packet_dump(" buf: ", + rctx->hash_carry, + rctx->hash_carry_len); + return -EAGAIN; + } + } + } + + /* if we have hash carry, then prefix it to the data in this request */ + local_nbuf = rctx->hash_carry_len; + rctx->hash_carry_len = 0; + if (local_nbuf) + tx_frag_num++; + new_data_len = chunksize - local_nbuf; + + /* Count number of sg entries to be used in this request */ + rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, + new_data_len); + + /* AES hashing keeps key size in type field, so need to copy it here */ + if (hash_parms.alg == HASH_ALG_AES) + hash_parms.type = (enum hash_type)cipher_parms.type; + else + hash_parms.type = spu->spu_hash_type(rctx->total_sent); + + digestsize = spu->spu_digest_size(ctx->digestsize, ctx->auth.alg, + hash_parms.type); + hash_parms.digestsize = digestsize; + + /* update the indexes */ + rctx->total_sent += chunksize; + /* if you sent a prebuf then that wasn't from this req->src */ + rctx->src_sent += new_data_len; + + if ((rctx->total_sent == rctx->total_todo) && rctx->is_final) + hash_parms.pad_len = spu->spu_hash_pad_len(hash_parms.alg, + hash_parms.mode, + chunksize, + blocksize); + + /* + * If a non-first chunk, then include the digest returned from the + * previous chunk so that hw can add to it (except for AES types). + */ + if ((hash_parms.type == HASH_TYPE_UPDT) && + (hash_parms.alg != HASH_ALG_AES)) { + hash_parms.key_buf = rctx->incr_hash; + hash_parms.key_len = digestsize; + } + + atomic64_add(chunksize, &iproc_priv.bytes_out); + + flow_log("%s() final: %u nbuf: %u ", + __func__, rctx->is_final, local_nbuf); + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + flow_log("max_payload infinite\n"); + else + flow_log("max_payload %u\n", ctx->max_payload); + + flow_log("chunk_start: %u chunk_size: %u\n", chunk_start, chunksize); + + /* Prepend SPU header with type 3 BCM header */ + memcpy(rctx->msg_buf.bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN); + + hash_parms.prebuf_len = local_nbuf; + spu_hdr_len = spu->spu_create_request(rctx->msg_buf.bcm_spu_req_hdr + + BCM_HDR_LEN, + &req_opts, &cipher_parms, + &hash_parms, &aead_parms, + new_data_len); + + if (spu_hdr_len == 0) { + pr_err("Failed to create SPU request header\n"); + return -EFAULT; + } + + /* + * Determine total length of padding required. Put all padding in one + * buffer. + */ + data_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, chunksize); + db_size = spu_real_db_size(0, 0, local_nbuf, new_data_len, + 0, 0, hash_parms.pad_len); + if (spu->spu_tx_status_len()) + stat_pad_len = spu->spu_wordalign_padlen(db_size); + if (stat_pad_len) + rx_frag_num++; + pad_len = hash_parms.pad_len + data_pad_len + stat_pad_len; + if (pad_len) { + tx_frag_num++; + spu->spu_request_pad(rctx->msg_buf.spu_req_pad, data_pad_len, + hash_parms.pad_len, ctx->auth.alg, + ctx->auth.mode, rctx->total_sent, + stat_pad_len); + } + + spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + spu_hdr_len); + packet_dump(" prebuf: ", rctx->hash_carry, local_nbuf); + flow_log("Data:\n"); + dump_sg(rctx->src_sg, rctx->src_skip, new_data_len); + packet_dump(" pad: ", rctx->msg_buf.spu_req_pad, pad_len); + + /* + * Build mailbox message containing SPU request msg and rx buffers + * to catch response message + */ + memset(mssg, 0, sizeof(*mssg)); + mssg->type = BRCM_MESSAGE_SPU; + mssg->ctx = rctx; /* Will be returned in response */ + + /* Create rx scatterlist to catch result */ + err = spu_ahash_rx_sg_create(mssg, rctx, rx_frag_num, digestsize, + stat_pad_len); + if (err) + return err; + + /* Create tx scatterlist containing SPU request message */ + tx_frag_num += rctx->src_nents; + if (spu->spu_tx_status_len()) + tx_frag_num++; + err = spu_ahash_tx_sg_create(mssg, rctx, tx_frag_num, spu_hdr_len, + local_nbuf, new_data_len, pad_len); + if (err) + return err; + + err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx); + if (unlikely(err < 0)) + return err; + + return -EINPROGRESS; +} + +/** + * spu_hmac_outer_hash() - Request synchonous software compute of the outer hash + * for an HMAC request. + * @req: The HMAC request from the crypto API + * @ctx: The session context + * + * Return: 0 if synchronous hash operation successful + * -EINVAL if the hash algo is unrecognized + * any other value indicates an error + */ +static int spu_hmac_outer_hash(struct ahash_request *req, + struct iproc_ctx_s *ctx) +{ + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash)); + int rc; + + switch (ctx->auth.alg) { + case HASH_ALG_MD5: + rc = do_shash("md5", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA1: + rc = do_shash("sha1", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA224: + rc = do_shash("sha224", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA256: + rc = do_shash("sha256", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA384: + rc = do_shash("sha384", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA512: + rc = do_shash("sha512", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + default: + pr_err("%s() Error : unknown hmac type\n", __func__); + rc = -EINVAL; + } + return rc; +} + +/** + * ahash_req_done() - Process a hash result from the SPU hardware. + * @rctx: Crypto request context + * + * Return: 0 if successful + * < 0 if an error + */ +static int ahash_req_done(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct ahash_request *req = ahash_request_cast(areq); + struct iproc_ctx_s *ctx = rctx->ctx; + int err; + + memcpy(req->result, rctx->msg_buf.digest, ctx->digestsize); + + if (spu->spu_type == SPU_TYPE_SPUM) { + /* byte swap the output from the UPDT function to network byte + * order + */ + if (ctx->auth.alg == HASH_ALG_MD5) { + __swab32s((u32 *)req->result); + __swab32s(((u32 *)req->result) + 1); + __swab32s(((u32 *)req->result) + 2); + __swab32s(((u32 *)req->result) + 3); + __swab32s(((u32 *)req->result) + 4); + } + } + + flow_dump(" digest ", req->result, ctx->digestsize); + + /* if this an HMAC then do the outer hash */ + if (rctx->is_sw_hmac) { + err = spu_hmac_outer_hash(req, ctx); + if (err < 0) + return err; + flow_dump(" hmac: ", req->result, ctx->digestsize); + } + + if (rctx->is_sw_hmac || ctx->auth.mode == HASH_MODE_HMAC) { + atomic_inc(&iproc_priv.op_counts[SPU_OP_HMAC]); + atomic_inc(&iproc_priv.hmac_cnt[ctx->auth.alg]); + } else { + atomic_inc(&iproc_priv.op_counts[SPU_OP_HASH]); + atomic_inc(&iproc_priv.hash_cnt[ctx->auth.alg]); + } + + return 0; +} + +/** + * handle_ahash_resp() - Process a SPU response message for a hash request. + * Checks if the entire crypto API request has been processed, and if so, + * invokes post processing on the result. + * @rctx: Crypto request context + */ +static void handle_ahash_resp(struct iproc_reqctx_s *rctx) +{ + struct iproc_ctx_s *ctx = rctx->ctx; + struct crypto_async_request *areq = rctx->parent; + struct ahash_request *req = ahash_request_cast(areq); + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash)); + /* + * Save hash to use as input to next op if incremental. Might be copying + * too much, but that's easier than figuring out actual digest size here + */ + memcpy(rctx->incr_hash, rctx->msg_buf.digest, MAX_DIGEST_SIZE); + + flow_log("%s() blocksize:%u digestsize:%u\n", + __func__, blocksize, ctx->digestsize); + + atomic64_add(ctx->digestsize, &iproc_priv.bytes_in); + + if (rctx->is_final && (rctx->total_sent == rctx->total_todo)) + ahash_req_done(rctx); +} + +/** + * spu_aead_rx_sg_create() - Build up the scatterlist of buffers used to receive + * a SPU response message for an AEAD request. Includes buffers to catch SPU + * message headers and the response data. + * @mssg: mailbox message containing the receive sg + * @req: Crypto API request + * @rctx: crypto request context + * @rx_frag_num: number of scatterlist elements required to hold the + * SPU response message + * @assoc_len: Length of associated data included in the crypto request + * @ret_iv_len: Length of IV returned in response + * @resp_len: Number of bytes of response data expected to be written to + * dst buffer from crypto API + * @digestsize: Length of hash digest, in bytes + * @stat_pad_len: Number of bytes required to pad the STAT field to + * a 4-byte boundary + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Returns: + * 0 if successful + * < 0 if an error + */ +static int spu_aead_rx_sg_create(struct brcm_message *mssg, + struct aead_request *req, + struct iproc_reqctx_s *rctx, + u8 rx_frag_num, + unsigned int assoc_len, + u32 ret_iv_len, unsigned int resp_len, + unsigned int digestsize, u32 stat_pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of response data expected */ + u32 assoc_buf_len; + u8 data_padlen = 0; + + if (ctx->is_rfc4543) { + /* RFC4543: only pad after data, not after AAD */ + data_padlen = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + assoc_len + resp_len); + assoc_buf_len = assoc_len; + } else { + data_padlen = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + resp_len); + assoc_buf_len = spu->spu_assoc_resp_len(ctx->cipher.mode, + assoc_len, ret_iv_len, + rctx->is_encrypt); + } + + if (ctx->cipher.mode == CIPHER_MODE_CCM) + /* ICV (after data) must be in the next 32-bit word for CCM */ + data_padlen += spu->spu_wordalign_padlen(assoc_buf_len + + resp_len + + data_padlen); + + if (data_padlen) + /* have to catch gcm pad in separate buffer */ + rx_frag_num++; + + mssg->spu.dst = kcalloc(rx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.dst) + return -ENOMEM; + + sg = mssg->spu.dst; + sg_init_table(sg, rx_frag_num); + + /* Space for SPU message header */ + sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len); + + if (assoc_buf_len) { + /* + * Don't write directly to req->dst, because SPU may pad the + * assoc data in the response + */ + memset(rctx->msg_buf.a.resp_aad, 0, assoc_buf_len); + sg_set_buf(sg++, rctx->msg_buf.a.resp_aad, assoc_buf_len); + } + + if (resp_len) { + /* + * Copy in each dst sg entry from request, up to chunksize. + * dst sg catches just the data. digest caught in separate buf. + */ + datalen = spu_msg_sg_add(&sg, &rctx->dst_sg, &rctx->dst_skip, + rctx->dst_nents, resp_len); + if (datalen < (resp_len)) { + pr_err("%s(): failed to copy dst sg to mbox msg. expected len %u, datalen %u", + __func__, resp_len, datalen); + return -EFAULT; + } + } + + /* If GCM/CCM data is padded, catch padding in separate buffer */ + if (data_padlen) { + memset(rctx->msg_buf.a.gcmpad, 0, data_padlen); + sg_set_buf(sg++, rctx->msg_buf.a.gcmpad, data_padlen); + } + + /* Always catch ICV in separate buffer */ + sg_set_buf(sg++, rctx->msg_buf.digest, digestsize); + + flow_log("stat_pad_len %u\n", stat_pad_len); + if (stat_pad_len) { + memset(rctx->msg_buf.rx_stat_pad, 0, stat_pad_len); + sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); + } + + memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN); + sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len()); + + return 0; +} + +/** + * spu_aead_tx_sg_create() - Build up the scatterlist of buffers used to send a + * SPU request message for an AEAD request. Includes SPU message headers and the + * request data. + * @mssg: mailbox message containing the transmit sg + * @rctx: crypto request context + * @tx_frag_num: number of scatterlist elements required to construct the + * SPU request message + * @spu_hdr_len: length of SPU message header in bytes + * @assoc: crypto API associated data scatterlist + * @assoc_len: length of associated data + * @assoc_nents: number of scatterlist entries containing assoc data + * @aead_iv_len: length of AEAD IV, if included + * @chunksize: Number of bytes of request data + * @aad_pad_len: Number of bytes of padding at end of AAD. For GCM/CCM. + * @pad_len: Number of pad bytes + * @incl_icv: If true, write separate ICV buffer after data and + * any padding + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Return: + * 0 if successful + * < 0 if an error + */ +static int spu_aead_tx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 tx_frag_num, + u32 spu_hdr_len, + struct scatterlist *assoc, + unsigned int assoc_len, + int assoc_nents, + unsigned int aead_iv_len, + unsigned int chunksize, + u32 aad_pad_len, u32 pad_len, bool incl_icv) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct scatterlist *assoc_sg = assoc; + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of data to write */ + u32 written; /* Number of bytes of data written */ + u32 assoc_offset = 0; + u32 stat_len; + + mssg->spu.src = kcalloc(tx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.src) + return -ENOMEM; + + sg = mssg->spu.src; + sg_init_table(sg, tx_frag_num); + + sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr, + BCM_HDR_LEN + spu_hdr_len); + + if (assoc_len) { + /* Copy in each associated data sg entry from request */ + written = spu_msg_sg_add(&sg, &assoc_sg, &assoc_offset, + assoc_nents, assoc_len); + if (written < assoc_len) { + pr_err("%s(): failed to copy assoc sg to mbox msg", + __func__); + return -EFAULT; + } + } + + if (aead_iv_len) + sg_set_buf(sg++, rctx->msg_buf.iv_ctr, aead_iv_len); + + if (aad_pad_len) { + memset(rctx->msg_buf.a.req_aad_pad, 0, aad_pad_len); + sg_set_buf(sg++, rctx->msg_buf.a.req_aad_pad, aad_pad_len); + } + + datalen = chunksize; + if ((chunksize > ctx->digestsize) && incl_icv) + datalen -= ctx->digestsize; + if (datalen) { + /* For aead, a single msg should consume the entire src sg */ + written = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip, + rctx->src_nents, datalen); + if (written < datalen) { + pr_err("%s(): failed to copy src sg to mbox msg", + __func__); + return -EFAULT; + } + } + + if (pad_len) { + memset(rctx->msg_buf.spu_req_pad, 0, pad_len); + sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len); + } + + if (incl_icv) + sg_set_buf(sg++, rctx->msg_buf.digest, ctx->digestsize); + + stat_len = spu->spu_tx_status_len(); + if (stat_len) { + memset(rctx->msg_buf.tx_stat, 0, stat_len); + sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len); + } + return 0; +} + +/** + * handle_aead_req() - Submit a SPU request message for the next chunk of the + * current AEAD request. + * @rctx: Crypto request context + * + * Unlike other operation types, we assume the length of the request fits in + * a single SPU request message. aead_enqueue() makes sure this is true. + * Comments for other op types regarding threads applies here as well. + * + * Unlike incremental hash ops, where the spu returns the entire hash for + * truncated algs like sha-224, the SPU returns just the truncated hash in + * response to aead requests. So digestsize is always ctx->digestsize here. + * + * Return: -EINPROGRESS: crypto request has been accepted and result will be + * returned asynchronously + * Any other value indicates an error + */ +static int handle_aead_req(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct aead_request *req = container_of(areq, + struct aead_request, base); + struct iproc_ctx_s *ctx = rctx->ctx; + int err; + unsigned int chunksize; + unsigned int resp_len; + u32 spu_hdr_len; + u32 db_size; + u32 stat_pad_len; + u32 pad_len; + struct brcm_message *mssg; /* mailbox message */ + struct spu_request_opts req_opts; + struct spu_cipher_parms cipher_parms; + struct spu_hash_parms hash_parms; + struct spu_aead_parms aead_parms; + int assoc_nents = 0; + bool incl_icv = false; + unsigned int digestsize = ctx->digestsize; + + /* number of entries in src and dst sg. Always includes SPU msg header. + */ + u8 rx_frag_num = 2; /* and STATUS */ + u8 tx_frag_num = 1; + + /* doing the whole thing at once */ + chunksize = rctx->total_todo; + + flow_log("%s: chunksize %u\n", __func__, chunksize); + + memset(&req_opts, 0, sizeof(req_opts)); + memset(&hash_parms, 0, sizeof(hash_parms)); + memset(&aead_parms, 0, sizeof(aead_parms)); + + req_opts.is_inbound = !(rctx->is_encrypt); + req_opts.auth_first = ctx->auth_first; + req_opts.is_aead = true; + req_opts.is_esp = ctx->is_esp; + + cipher_parms.alg = ctx->cipher.alg; + cipher_parms.mode = ctx->cipher.mode; + cipher_parms.type = ctx->cipher_type; + cipher_parms.key_buf = ctx->enckey; + cipher_parms.key_len = ctx->enckeylen; + cipher_parms.iv_buf = rctx->msg_buf.iv_ctr; + cipher_parms.iv_len = rctx->iv_ctr_len; + + hash_parms.alg = ctx->auth.alg; + hash_parms.mode = ctx->auth.mode; + hash_parms.type = HASH_TYPE_NONE; + hash_parms.key_buf = (u8 *)ctx->authkey; + hash_parms.key_len = ctx->authkeylen; + hash_parms.digestsize = digestsize; + + if ((ctx->auth.alg == HASH_ALG_SHA224) && + (ctx->authkeylen < SHA224_DIGEST_SIZE)) + hash_parms.key_len = SHA224_DIGEST_SIZE; + + aead_parms.assoc_size = req->assoclen; + if (ctx->is_esp && !ctx->is_rfc4543) { + /* + * 8-byte IV is included assoc data in request. SPU2 + * expects AAD to include just SPI and seqno. So + * subtract off the IV len. + */ + aead_parms.assoc_size -= GCM_RFC4106_IV_SIZE; + + if (rctx->is_encrypt) { + aead_parms.return_iv = true; + aead_parms.ret_iv_len = GCM_RFC4106_IV_SIZE; + aead_parms.ret_iv_off = GCM_ESP_SALT_SIZE; + } + } else { + aead_parms.ret_iv_len = 0; + } + + /* + * Count number of sg entries from the crypto API request that are to + * be included in this mailbox message. For dst sg, don't count space + * for digest. Digest gets caught in a separate buffer and copied back + * to dst sg when processing response. + */ + rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, chunksize); + rctx->dst_nents = spu_sg_count(rctx->dst_sg, rctx->dst_skip, chunksize); + if (aead_parms.assoc_size) + assoc_nents = spu_sg_count(rctx->assoc, 0, + aead_parms.assoc_size); + + mssg = &rctx->mb_mssg; + + rctx->total_sent = chunksize; + rctx->src_sent = chunksize; + if (spu->spu_assoc_resp_len(ctx->cipher.mode, + aead_parms.assoc_size, + aead_parms.ret_iv_len, + rctx->is_encrypt)) + rx_frag_num++; + + aead_parms.iv_len = spu->spu_aead_ivlen(ctx->cipher.mode, + rctx->iv_ctr_len); + + if (ctx->auth.alg == HASH_ALG_AES) + hash_parms.type = (enum hash_type)ctx->cipher_type; + + /* General case AAD padding (CCM and RFC4543 special cases below) */ + aead_parms.aad_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + aead_parms.assoc_size); + + /* General case data padding (CCM decrypt special case below) */ + aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + chunksize); + + if (ctx->cipher.mode == CIPHER_MODE_CCM) { + /* + * for CCM, AAD len + 2 (rather than AAD len) needs to be + * 128-bit aligned + */ + aead_parms.aad_pad_len = spu->spu_gcm_ccm_pad_len( + ctx->cipher.mode, + aead_parms.assoc_size + 2); + + /* + * And when decrypting CCM, need to pad without including + * size of ICV which is tacked on to end of chunk + */ + if (!rctx->is_encrypt) + aead_parms.data_pad_len = + spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + chunksize - digestsize); + + /* CCM also requires software to rewrite portions of IV: */ + spu->spu_ccm_update_iv(digestsize, &cipher_parms, req->assoclen, + chunksize, rctx->is_encrypt, + ctx->is_esp); + } + + if (ctx->is_rfc4543) { + /* + * RFC4543: data is included in AAD, so don't pad after AAD + * and pad data based on both AAD + data size + */ + aead_parms.aad_pad_len = 0; + if (!rctx->is_encrypt) + aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len( + ctx->cipher.mode, + aead_parms.assoc_size + chunksize - + digestsize); + else + aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len( + ctx->cipher.mode, + aead_parms.assoc_size + chunksize); + + req_opts.is_rfc4543 = true; + } + + if (spu_req_incl_icv(ctx->cipher.mode, rctx->is_encrypt)) { + incl_icv = true; + tx_frag_num++; + /* Copy ICV from end of src scatterlist to digest buf */ + sg_copy_part_to_buf(req->src, rctx->msg_buf.digest, digestsize, + req->assoclen + rctx->total_sent - + digestsize); + } + + atomic64_add(chunksize, &iproc_priv.bytes_out); + + flow_log("%s()-sent chunksize:%u\n", __func__, chunksize); + + /* Prepend SPU header with type 3 BCM header */ + memcpy(rctx->msg_buf.bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN); + + spu_hdr_len = spu->spu_create_request(rctx->msg_buf.bcm_spu_req_hdr + + BCM_HDR_LEN, &req_opts, + &cipher_parms, &hash_parms, + &aead_parms, chunksize); + + /* Determine total length of padding. Put all padding in one buffer. */ + db_size = spu_real_db_size(aead_parms.assoc_size, aead_parms.iv_len, 0, + chunksize, aead_parms.aad_pad_len, + aead_parms.data_pad_len, 0); + + stat_pad_len = spu->spu_wordalign_padlen(db_size); + + if (stat_pad_len) + rx_frag_num++; + pad_len = aead_parms.data_pad_len + stat_pad_len; + if (pad_len) { + tx_frag_num++; + spu->spu_request_pad(rctx->msg_buf.spu_req_pad, + aead_parms.data_pad_len, 0, + ctx->auth.alg, ctx->auth.mode, + rctx->total_sent, stat_pad_len); + } + + spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + spu_hdr_len); + dump_sg(rctx->assoc, 0, aead_parms.assoc_size); + packet_dump(" aead iv: ", rctx->msg_buf.iv_ctr, aead_parms.iv_len); + packet_log("BD:\n"); + dump_sg(rctx->src_sg, rctx->src_skip, chunksize); + packet_dump(" pad: ", rctx->msg_buf.spu_req_pad, pad_len); + + /* + * Build mailbox message containing SPU request msg and rx buffers + * to catch response message + */ + memset(mssg, 0, sizeof(*mssg)); + mssg->type = BRCM_MESSAGE_SPU; + mssg->ctx = rctx; /* Will be returned in response */ + + /* Create rx scatterlist to catch result */ + rx_frag_num += rctx->dst_nents; + resp_len = chunksize; + + /* + * Always catch ICV in separate buffer. Have to for GCM/CCM because of + * padding. Have to for SHA-224 and other truncated SHAs because SPU + * sends entire digest back. + */ + rx_frag_num++; + + if (((ctx->cipher.mode == CIPHER_MODE_GCM) || + (ctx->cipher.mode == CIPHER_MODE_CCM)) && !rctx->is_encrypt) { + /* + * Input is ciphertxt plus ICV, but ICV not incl + * in output. + */ + resp_len -= ctx->digestsize; + if (resp_len == 0) + /* no rx frags to catch output data */ + rx_frag_num -= rctx->dst_nents; + } + + err = spu_aead_rx_sg_create(mssg, req, rctx, rx_frag_num, + aead_parms.assoc_size, + aead_parms.ret_iv_len, resp_len, digestsize, + stat_pad_len); + if (err) + return err; + + /* Create tx scatterlist containing SPU request message */ + tx_frag_num += rctx->src_nents; + tx_frag_num += assoc_nents; + if (aead_parms.aad_pad_len) + tx_frag_num++; + if (aead_parms.iv_len) + tx_frag_num++; + if (spu->spu_tx_status_len()) + tx_frag_num++; + err = spu_aead_tx_sg_create(mssg, rctx, tx_frag_num, spu_hdr_len, + rctx->assoc, aead_parms.assoc_size, + assoc_nents, aead_parms.iv_len, chunksize, + aead_parms.aad_pad_len, pad_len, incl_icv); + if (err) + return err; + + err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx); + if (unlikely(err < 0)) + return err; + + return -EINPROGRESS; +} + +/** + * handle_aead_resp() - Process a SPU response message for an AEAD request. + * @rctx: Crypto request context + */ +static void handle_aead_resp(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct aead_request *req = container_of(areq, + struct aead_request, base); + struct iproc_ctx_s *ctx = rctx->ctx; + u32 payload_len; + unsigned int icv_offset; + u32 result_len; + + /* See how much data was returned */ + payload_len = spu->spu_payload_length(rctx->msg_buf.spu_resp_hdr); + flow_log("payload_len %u\n", payload_len); + + /* only count payload */ + atomic64_add(payload_len, &iproc_priv.bytes_in); + + if (req->assoclen) + packet_dump(" assoc_data ", rctx->msg_buf.a.resp_aad, + req->assoclen); + + /* + * Copy the ICV back to the destination + * buffer. In decrypt case, SPU gives us back the digest, but crypto + * API doesn't expect ICV in dst buffer. + */ + result_len = req->cryptlen; + if (rctx->is_encrypt) { + icv_offset = req->assoclen + rctx->total_sent; + packet_dump(" ICV: ", rctx->msg_buf.digest, ctx->digestsize); + flow_log("copying ICV to dst sg at offset %u\n", icv_offset); + sg_copy_part_from_buf(req->dst, rctx->msg_buf.digest, + ctx->digestsize, icv_offset); + result_len += ctx->digestsize; + } + + packet_log("response data: "); + dump_sg(req->dst, req->assoclen, result_len); + + atomic_inc(&iproc_priv.op_counts[SPU_OP_AEAD]); + if (ctx->cipher.alg == CIPHER_ALG_AES) { + if (ctx->cipher.mode == CIPHER_MODE_CCM) + atomic_inc(&iproc_priv.aead_cnt[AES_CCM]); + else if (ctx->cipher.mode == CIPHER_MODE_GCM) + atomic_inc(&iproc_priv.aead_cnt[AES_GCM]); + else + atomic_inc(&iproc_priv.aead_cnt[AUTHENC]); + } else { + atomic_inc(&iproc_priv.aead_cnt[AUTHENC]); + } +} + +/** + * spu_chunk_cleanup() - Do cleanup after processing one chunk of a request + * @rctx: request context + * + * Mailbox scatterlists are allocated for each chunk. So free them after + * processing each chunk. + */ +static void spu_chunk_cleanup(struct iproc_reqctx_s *rctx) +{ + /* mailbox message used to tx request */ + struct brcm_message *mssg = &rctx->mb_mssg; + + kfree(mssg->spu.src); + kfree(mssg->spu.dst); + memset(mssg, 0, sizeof(struct brcm_message)); +} + +/** + * finish_req() - Used to invoke the complete callback from the requester when + * a request has been handled asynchronously. + * @rctx: Request context + * @err: Indicates whether the request was successful or not + * + * Ensures that cleanup has been done for request + */ +static void finish_req(struct iproc_reqctx_s *rctx, int err) +{ + struct crypto_async_request *areq = rctx->parent; + + flow_log("%s() err:%d\n\n", __func__, err); + + /* No harm done if already called */ + spu_chunk_cleanup(rctx); + + if (areq) + crypto_request_complete(areq, err); +} + +/** + * spu_rx_callback() - Callback from mailbox framework with a SPU response. + * @cl: mailbox client structure for SPU driver + * @msg: mailbox message containing SPU response + */ +static void spu_rx_callback(struct mbox_client *cl, void *msg) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct brcm_message *mssg = msg; + struct iproc_reqctx_s *rctx; + int err; + + rctx = mssg->ctx; + if (unlikely(!rctx)) { + /* This is fatal */ + pr_err("%s(): no request context", __func__); + err = -EFAULT; + goto cb_finish; + } + + /* process the SPU status */ + err = spu->spu_status_process(rctx->msg_buf.rx_stat); + if (err != 0) { + if (err == SPU_INVALID_ICV) + atomic_inc(&iproc_priv.bad_icv); + err = -EBADMSG; + goto cb_finish; + } + + /* Process the SPU response message */ + switch (rctx->ctx->alg->type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + handle_skcipher_resp(rctx); + break; + case CRYPTO_ALG_TYPE_AHASH: + handle_ahash_resp(rctx); + break; + case CRYPTO_ALG_TYPE_AEAD: + handle_aead_resp(rctx); + break; + default: + err = -EINVAL; + goto cb_finish; + } + + /* + * If this response does not complete the request, then send the next + * request chunk. + */ + if (rctx->total_sent < rctx->total_todo) { + /* Deallocate anything specific to previous chunk */ + spu_chunk_cleanup(rctx); + + switch (rctx->ctx->alg->type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + err = handle_skcipher_req(rctx); + break; + case CRYPTO_ALG_TYPE_AHASH: + err = handle_ahash_req(rctx); + if (err == -EAGAIN) + /* + * we saved data in hash carry, but tell crypto + * API we successfully completed request. + */ + err = 0; + break; + case CRYPTO_ALG_TYPE_AEAD: + err = handle_aead_req(rctx); + break; + default: + err = -EINVAL; + } + + if (err == -EINPROGRESS) + /* Successfully submitted request for next chunk */ + return; + } + +cb_finish: + finish_req(rctx, err); +} + +/* ==================== Kernel Cryptographic API ==================== */ + +/** + * skcipher_enqueue() - Handle skcipher encrypt or decrypt request. + * @req: Crypto API request + * @encrypt: true if encrypting; false if decrypting + * + * Return: -EINPROGRESS if request accepted and result will be returned + * asynchronously + * < 0 if an error + */ +static int skcipher_enqueue(struct skcipher_request *req, bool encrypt) +{ + struct iproc_reqctx_s *rctx = skcipher_request_ctx(req); + struct iproc_ctx_s *ctx = + crypto_skcipher_ctx(crypto_skcipher_reqtfm(req)); + int err; + + flow_log("%s() enc:%u\n", __func__, encrypt); + + rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + rctx->parent = &req->base; + rctx->is_encrypt = encrypt; + rctx->bd_suppress = false; + rctx->total_todo = req->cryptlen; + rctx->src_sent = 0; + rctx->total_sent = 0; + rctx->total_received = 0; + rctx->ctx = ctx; + + /* Initialize current position in src and dst scatterlists */ + rctx->src_sg = req->src; + rctx->src_nents = 0; + rctx->src_skip = 0; + rctx->dst_sg = req->dst; + rctx->dst_nents = 0; + rctx->dst_skip = 0; + + if (ctx->cipher.mode == CIPHER_MODE_CBC || + ctx->cipher.mode == CIPHER_MODE_CTR || + ctx->cipher.mode == CIPHER_MODE_OFB || + ctx->cipher.mode == CIPHER_MODE_XTS || + ctx->cipher.mode == CIPHER_MODE_GCM || + ctx->cipher.mode == CIPHER_MODE_CCM) { + rctx->iv_ctr_len = + crypto_skcipher_ivsize(crypto_skcipher_reqtfm(req)); + memcpy(rctx->msg_buf.iv_ctr, req->iv, rctx->iv_ctr_len); + } else { + rctx->iv_ctr_len = 0; + } + + /* Choose a SPU to process this request */ + rctx->chan_idx = select_channel(); + err = handle_skcipher_req(rctx); + if (err != -EINPROGRESS) + /* synchronous result */ + spu_chunk_cleanup(rctx); + + return err; +} + +static int des_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + int err; + + err = verify_skcipher_des_key(cipher, key); + if (err) + return err; + + ctx->cipher_type = CIPHER_TYPE_DES; + return 0; +} + +static int threedes_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + int err; + + err = verify_skcipher_des3_key(cipher, key); + if (err) + return err; + + ctx->cipher_type = CIPHER_TYPE_3DES; + return 0; +} + +static int aes_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + + if (ctx->cipher.mode == CIPHER_MODE_XTS) + /* XTS includes two keys of equal length */ + keylen = keylen / 2; + + switch (keylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + return -EINVAL; + } + WARN_ON((ctx->max_payload != SPU_MAX_PAYLOAD_INF) && + ((ctx->max_payload % AES_BLOCK_SIZE) != 0)); + return 0; +} + +static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + struct spu_cipher_parms cipher_parms; + u32 alloc_len = 0; + int err; + + flow_log("skcipher_setkey() keylen: %d\n", keylen); + flow_dump(" key: ", key, keylen); + + switch (ctx->cipher.alg) { + case CIPHER_ALG_DES: + err = des_setkey(cipher, key, keylen); + break; + case CIPHER_ALG_3DES: + err = threedes_setkey(cipher, key, keylen); + break; + case CIPHER_ALG_AES: + err = aes_setkey(cipher, key, keylen); + break; + default: + pr_err("%s() Error: unknown cipher alg\n", __func__); + err = -EINVAL; + } + if (err) + return err; + + memcpy(ctx->enckey, key, keylen); + ctx->enckeylen = keylen; + + /* SPU needs XTS keys in the reverse order the crypto API presents */ + if ((ctx->cipher.alg == CIPHER_ALG_AES) && + (ctx->cipher.mode == CIPHER_MODE_XTS)) { + unsigned int xts_keylen = keylen / 2; + + memcpy(ctx->enckey, key + xts_keylen, xts_keylen); + memcpy(ctx->enckey + xts_keylen, key, xts_keylen); + } + + if (spu->spu_type == SPU_TYPE_SPUM) + alloc_len = BCM_HDR_LEN + SPU_HEADER_ALLOC_LEN; + else if (spu->spu_type == SPU_TYPE_SPU2) + alloc_len = BCM_HDR_LEN + SPU2_HEADER_ALLOC_LEN; + memset(ctx->bcm_spu_req_hdr, 0, alloc_len); + cipher_parms.iv_buf = NULL; + cipher_parms.iv_len = crypto_skcipher_ivsize(cipher); + flow_log("%s: iv_len %u\n", __func__, cipher_parms.iv_len); + + cipher_parms.alg = ctx->cipher.alg; + cipher_parms.mode = ctx->cipher.mode; + cipher_parms.type = ctx->cipher_type; + cipher_parms.key_buf = ctx->enckey; + cipher_parms.key_len = ctx->enckeylen; + + /* Prepend SPU request message with BCM header */ + memcpy(ctx->bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN); + ctx->spu_req_hdr_len = + spu->spu_cipher_req_init(ctx->bcm_spu_req_hdr + BCM_HDR_LEN, + &cipher_parms); + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, + ctx->enckeylen, + false); + + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_CIPHER]); + + return 0; +} + +static int skcipher_encrypt(struct skcipher_request *req) +{ + flow_log("skcipher_encrypt() nbytes:%u\n", req->cryptlen); + + return skcipher_enqueue(req, true); +} + +static int skcipher_decrypt(struct skcipher_request *req) +{ + flow_log("skcipher_decrypt() nbytes:%u\n", req->cryptlen); + return skcipher_enqueue(req, false); +} + +static int ahash_enqueue(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + int err; + const char *alg_name; + + flow_log("ahash_enqueue() nbytes:%u\n", req->nbytes); + + rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + rctx->parent = &req->base; + rctx->ctx = ctx; + rctx->bd_suppress = true; + memset(&rctx->mb_mssg, 0, sizeof(struct brcm_message)); + + /* Initialize position in src scatterlist */ + rctx->src_sg = req->src; + rctx->src_skip = 0; + rctx->src_nents = 0; + rctx->dst_sg = NULL; + rctx->dst_skip = 0; + rctx->dst_nents = 0; + + /* SPU2 hardware does not compute hash of zero length data */ + if ((rctx->is_final == 1) && (rctx->total_todo == 0) && + (iproc_priv.spu.spu_type == SPU_TYPE_SPU2)) { + alg_name = crypto_ahash_alg_name(tfm); + flow_log("Doing %sfinal %s zero-len hash request in software\n", + rctx->is_final ? "" : "non-", alg_name); + err = do_shash((unsigned char *)alg_name, req->result, + NULL, 0, NULL, 0, ctx->authkey, + ctx->authkeylen); + if (err < 0) + flow_log("Hash request failed with error %d\n", err); + return err; + } + /* Choose a SPU to process this request */ + rctx->chan_idx = select_channel(); + + err = handle_ahash_req(rctx); + if (err != -EINPROGRESS) + /* synchronous result */ + spu_chunk_cleanup(rctx); + + if (err == -EAGAIN) + /* + * we saved data in hash carry, but tell crypto API + * we successfully completed request. + */ + err = 0; + + return err; +} + +static int __ahash_init(struct ahash_request *req) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + + flow_log("%s()\n", __func__); + + /* Initialize the context */ + rctx->hash_carry_len = 0; + rctx->is_final = 0; + + rctx->total_todo = 0; + rctx->src_sent = 0; + rctx->total_sent = 0; + rctx->total_received = 0; + + ctx->digestsize = crypto_ahash_digestsize(tfm); + /* If we add a hash whose digest is larger, catch it here. */ + WARN_ON(ctx->digestsize > MAX_DIGEST_SIZE); + + rctx->is_sw_hmac = false; + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, 0, + true); + + return 0; +} + +/** + * spu_no_incr_hash() - Determine whether incremental hashing is supported. + * @ctx: Crypto session context + * + * SPU-2 does not support incremental hashing (we'll have to revisit and + * condition based on chip revision or device tree entry if future versions do + * support incremental hash) + * + * SPU-M also doesn't support incremental hashing of AES-XCBC + * + * Return: true if incremental hashing is not supported + * false otherwise + */ +static bool spu_no_incr_hash(struct iproc_ctx_s *ctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + + if (spu->spu_type == SPU_TYPE_SPU2) + return true; + + if ((ctx->auth.alg == HASH_ALG_AES) && + (ctx->auth.mode == HASH_MODE_XCBC)) + return true; + + /* Otherwise, incremental hashing is supported */ + return false; +} + +static int ahash_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + const char *alg_name; + struct crypto_shash *hash; + int ret; + gfp_t gfp; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + alg_name = crypto_ahash_alg_name(tfm); + hash = crypto_alloc_shash(alg_name, 0, 0); + if (IS_ERR(hash)) { + ret = PTR_ERR(hash); + goto err; + } + + gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + ctx->shash = kmalloc(sizeof(*ctx->shash) + + crypto_shash_descsize(hash), gfp); + if (!ctx->shash) { + ret = -ENOMEM; + goto err_hash; + } + ctx->shash->tfm = hash; + + /* Set the key using data we already have from setkey */ + if (ctx->authkeylen > 0) { + ret = crypto_shash_setkey(hash, ctx->authkey, + ctx->authkeylen); + if (ret) + goto err_shash; + } + + /* Initialize hash w/ this key and other params */ + ret = crypto_shash_init(ctx->shash); + if (ret) + goto err_shash; + } else { + /* Otherwise call the internal function which uses SPU hw */ + ret = __ahash_init(req); + } + + return ret; + +err_shash: + kfree(ctx->shash); +err_hash: + crypto_free_shash(hash); +err: + return ret; +} + +static int __ahash_update(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + + flow_log("ahash_update() nbytes:%u\n", req->nbytes); + + if (!req->nbytes) + return 0; + rctx->total_todo += req->nbytes; + rctx->src_sent = 0; + + return ahash_enqueue(req); +} + +static int ahash_update(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + u8 *tmpbuf; + int ret; + int nents; + gfp_t gfp; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + if (req->src) + nents = sg_nents(req->src); + else + return -EINVAL; + + /* Copy data from req scatterlist to tmp buffer */ + gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + tmpbuf = kmalloc(req->nbytes, gfp); + if (!tmpbuf) + return -ENOMEM; + + if (sg_copy_to_buffer(req->src, nents, tmpbuf, req->nbytes) != + req->nbytes) { + kfree(tmpbuf); + return -EINVAL; + } + + /* Call synchronous update */ + ret = crypto_shash_update(ctx->shash, tmpbuf, req->nbytes); + kfree(tmpbuf); + } else { + /* Otherwise call the internal function which uses SPU hw */ + ret = __ahash_update(req); + } + + return ret; +} + +static int __ahash_final(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + + flow_log("ahash_final() nbytes:%u\n", req->nbytes); + + rctx->is_final = 1; + + return ahash_enqueue(req); +} + +static int ahash_final(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + int ret; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + ret = crypto_shash_final(ctx->shash, req->result); + + /* Done with hash, can deallocate it now */ + crypto_free_shash(ctx->shash->tfm); + kfree(ctx->shash); + + } else { + /* Otherwise call the internal function which uses SPU hw */ + ret = __ahash_final(req); + } + + return ret; +} + +static int __ahash_finup(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + + flow_log("ahash_finup() nbytes:%u\n", req->nbytes); + + rctx->total_todo += req->nbytes; + rctx->src_sent = 0; + rctx->is_final = 1; + + return ahash_enqueue(req); +} + +static int ahash_finup(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + u8 *tmpbuf; + int ret; + int nents; + gfp_t gfp; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + if (req->src) { + nents = sg_nents(req->src); + } else { + ret = -EINVAL; + goto ahash_finup_exit; + } + + /* Copy data from req scatterlist to tmp buffer */ + gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + tmpbuf = kmalloc(req->nbytes, gfp); + if (!tmpbuf) { + ret = -ENOMEM; + goto ahash_finup_exit; + } + + if (sg_copy_to_buffer(req->src, nents, tmpbuf, req->nbytes) != + req->nbytes) { + ret = -EINVAL; + goto ahash_finup_free; + } + + /* Call synchronous update */ + ret = crypto_shash_finup(ctx->shash, tmpbuf, req->nbytes, + req->result); + } else { + /* Otherwise call the internal function which uses SPU hw */ + return __ahash_finup(req); + } +ahash_finup_free: + kfree(tmpbuf); + +ahash_finup_exit: + /* Done with hash, can deallocate it now */ + crypto_free_shash(ctx->shash->tfm); + kfree(ctx->shash); + return ret; +} + +static int ahash_digest(struct ahash_request *req) +{ + int err; + + flow_log("ahash_digest() nbytes:%u\n", req->nbytes); + + /* whole thing at once */ + err = __ahash_init(req); + if (!err) + err = __ahash_finup(req); + + return err; +} + +static int ahash_setkey(struct crypto_ahash *ahash, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_ahash_ctx(ahash); + + flow_log("%s() ahash:%p key:%p keylen:%u\n", + __func__, ahash, key, keylen); + flow_dump(" key: ", key, keylen); + + if (ctx->auth.alg == HASH_ALG_AES) { + switch (keylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + pr_err("%s() Error: Invalid key length\n", __func__); + return -EINVAL; + } + } else { + pr_err("%s() Error: unknown hash alg\n", __func__); + return -EINVAL; + } + memcpy(ctx->authkey, key, keylen); + ctx->authkeylen = keylen; + + return 0; +} + +static int ahash_export(struct ahash_request *req, void *out) +{ + const struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct spu_hash_export_s *spu_exp = (struct spu_hash_export_s *)out; + + spu_exp->total_todo = rctx->total_todo; + spu_exp->total_sent = rctx->total_sent; + spu_exp->is_sw_hmac = rctx->is_sw_hmac; + memcpy(spu_exp->hash_carry, rctx->hash_carry, sizeof(rctx->hash_carry)); + spu_exp->hash_carry_len = rctx->hash_carry_len; + memcpy(spu_exp->incr_hash, rctx->incr_hash, sizeof(rctx->incr_hash)); + + return 0; +} + +static int ahash_import(struct ahash_request *req, const void *in) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct spu_hash_export_s *spu_exp = (struct spu_hash_export_s *)in; + + rctx->total_todo = spu_exp->total_todo; + rctx->total_sent = spu_exp->total_sent; + rctx->is_sw_hmac = spu_exp->is_sw_hmac; + memcpy(rctx->hash_carry, spu_exp->hash_carry, sizeof(rctx->hash_carry)); + rctx->hash_carry_len = spu_exp->hash_carry_len; + memcpy(rctx->incr_hash, spu_exp->incr_hash, sizeof(rctx->incr_hash)); + + return 0; +} + +static int ahash_hmac_setkey(struct crypto_ahash *ahash, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_ahash_ctx(ahash); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash)); + unsigned int digestsize = crypto_ahash_digestsize(ahash); + unsigned int index; + int rc; + + flow_log("%s() ahash:%p key:%p keylen:%u blksz:%u digestsz:%u\n", + __func__, ahash, key, keylen, blocksize, digestsize); + flow_dump(" key: ", key, keylen); + + if (keylen > blocksize) { + switch (ctx->auth.alg) { + case HASH_ALG_MD5: + rc = do_shash("md5", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA1: + rc = do_shash("sha1", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA224: + rc = do_shash("sha224", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA256: + rc = do_shash("sha256", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA384: + rc = do_shash("sha384", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA512: + rc = do_shash("sha512", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA3_224: + rc = do_shash("sha3-224", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + case HASH_ALG_SHA3_256: + rc = do_shash("sha3-256", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + case HASH_ALG_SHA3_384: + rc = do_shash("sha3-384", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + case HASH_ALG_SHA3_512: + rc = do_shash("sha3-512", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + default: + pr_err("%s() Error: unknown hash alg\n", __func__); + return -EINVAL; + } + if (rc < 0) { + pr_err("%s() Error %d computing shash for %s\n", + __func__, rc, hash_alg_name[ctx->auth.alg]); + return rc; + } + ctx->authkeylen = digestsize; + + flow_log(" keylen > digestsize... hashed\n"); + flow_dump(" newkey: ", ctx->authkey, ctx->authkeylen); + } else { + memcpy(ctx->authkey, key, keylen); + ctx->authkeylen = keylen; + } + + /* + * Full HMAC operation in SPUM is not verified, + * So keeping the generation of IPAD, OPAD and + * outer hashing in software. + */ + if (iproc_priv.spu.spu_type == SPU_TYPE_SPUM) { + memcpy(ctx->ipad, ctx->authkey, ctx->authkeylen); + memset(ctx->ipad + ctx->authkeylen, 0, + blocksize - ctx->authkeylen); + ctx->authkeylen = 0; + unsafe_memcpy(ctx->opad, ctx->ipad, blocksize, + "fortified memcpy causes -Wrestrict warning"); + + for (index = 0; index < blocksize; index++) { + ctx->ipad[index] ^= HMAC_IPAD_VALUE; + ctx->opad[index] ^= HMAC_OPAD_VALUE; + } + + flow_dump(" ipad: ", ctx->ipad, blocksize); + flow_dump(" opad: ", ctx->opad, blocksize); + } + ctx->digestsize = digestsize; + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_HMAC]); + + return 0; +} + +static int ahash_hmac_init(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm)); + + flow_log("ahash_hmac_init()\n"); + + /* init the context as a hash */ + ahash_init(req); + + if (!spu_no_incr_hash(ctx)) { + /* SPU-M can do incr hashing but needs sw for outer HMAC */ + rctx->is_sw_hmac = true; + ctx->auth.mode = HASH_MODE_HASH; + /* start with a prepended ipad */ + memcpy(rctx->hash_carry, ctx->ipad, blocksize); + rctx->hash_carry_len = blocksize; + rctx->total_todo += blocksize; + } + + return 0; +} + +static int ahash_hmac_update(struct ahash_request *req) +{ + flow_log("ahash_hmac_update() nbytes:%u\n", req->nbytes); + + if (!req->nbytes) + return 0; + + return ahash_update(req); +} + +static int ahash_hmac_final(struct ahash_request *req) +{ + flow_log("ahash_hmac_final() nbytes:%u\n", req->nbytes); + + return ahash_final(req); +} + +static int ahash_hmac_finup(struct ahash_request *req) +{ + flow_log("ahash_hmac_finupl() nbytes:%u\n", req->nbytes); + + return ahash_finup(req); +} + +static int ahash_hmac_digest(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm)); + + flow_log("ahash_hmac_digest() nbytes:%u\n", req->nbytes); + + /* Perform initialization and then call finup */ + __ahash_init(req); + + if (iproc_priv.spu.spu_type == SPU_TYPE_SPU2) { + /* + * SPU2 supports full HMAC implementation in the + * hardware, need not to generate IPAD, OPAD and + * outer hash in software. + * Only for hash key len > hash block size, SPU2 + * expects to perform hashing on the key, shorten + * it to digest size and feed it as hash key. + */ + rctx->is_sw_hmac = false; + ctx->auth.mode = HASH_MODE_HMAC; + } else { + rctx->is_sw_hmac = true; + ctx->auth.mode = HASH_MODE_HASH; + /* start with a prepended ipad */ + memcpy(rctx->hash_carry, ctx->ipad, blocksize); + rctx->hash_carry_len = blocksize; + rctx->total_todo += blocksize; + } + + return __ahash_finup(req); +} + +/* aead helpers */ + +static int aead_need_fallback(struct aead_request *req) +{ + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_aead_ctx(aead); + u32 payload_len; + + /* + * SPU hardware cannot handle the AES-GCM/CCM case where plaintext + * and AAD are both 0 bytes long. So use fallback in this case. + */ + if (((ctx->cipher.mode == CIPHER_MODE_GCM) || + (ctx->cipher.mode == CIPHER_MODE_CCM)) && + (req->assoclen == 0)) { + if ((rctx->is_encrypt && (req->cryptlen == 0)) || + (!rctx->is_encrypt && (req->cryptlen == ctx->digestsize))) { + flow_log("AES GCM/CCM needs fallback for 0 len req\n"); + return 1; + } + } + + /* SPU-M hardware only supports CCM digest size of 8, 12, or 16 bytes */ + if ((ctx->cipher.mode == CIPHER_MODE_CCM) && + (spu->spu_type == SPU_TYPE_SPUM) && + (ctx->digestsize != 8) && (ctx->digestsize != 12) && + (ctx->digestsize != 16)) { + flow_log("%s() AES CCM needs fallback for digest size %d\n", + __func__, ctx->digestsize); + return 1; + } + + /* + * SPU-M on NSP has an issue where AES-CCM hash is not correct + * when AAD size is 0 + */ + if ((ctx->cipher.mode == CIPHER_MODE_CCM) && + (spu->spu_subtype == SPU_SUBTYPE_SPUM_NSP) && + (req->assoclen == 0)) { + flow_log("%s() AES_CCM needs fallback for 0 len AAD on NSP\n", + __func__); + return 1; + } + + /* + * RFC4106 and RFC4543 cannot handle the case where AAD is other than + * 16 or 20 bytes long. So use fallback in this case. + */ + if (ctx->cipher.mode == CIPHER_MODE_GCM && + ctx->cipher.alg == CIPHER_ALG_AES && + rctx->iv_ctr_len == GCM_RFC4106_IV_SIZE && + req->assoclen != 16 && req->assoclen != 20) { + flow_log("RFC4106/RFC4543 needs fallback for assoclen" + " other than 16 or 20 bytes\n"); + return 1; + } + + payload_len = req->cryptlen; + if (spu->spu_type == SPU_TYPE_SPUM) + payload_len += req->assoclen; + + flow_log("%s() payload len: %u\n", __func__, payload_len); + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + return 0; + else + return payload_len > ctx->max_payload; +} + +static int aead_do_fallback(struct aead_request *req, bool is_encrypt) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + struct aead_request *subreq; + + flow_log("%s() enc:%u\n", __func__, is_encrypt); + + if (!ctx->fallback_cipher) + return -EINVAL; + + subreq = &rctx->req; + aead_request_set_tfm(subreq, ctx->fallback_cipher); + aead_request_set_callback(subreq, aead_request_flags(req), + req->base.complete, req->base.data); + aead_request_set_crypt(subreq, req->src, req->dst, req->cryptlen, + req->iv); + aead_request_set_ad(subreq, req->assoclen); + + return is_encrypt ? crypto_aead_encrypt(req) : + crypto_aead_decrypt(req); +} + +static int aead_enqueue(struct aead_request *req, bool is_encrypt) +{ + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_aead_ctx(aead); + int err; + + flow_log("%s() enc:%u\n", __func__, is_encrypt); + + if (req->assoclen > MAX_ASSOC_SIZE) { + pr_err + ("%s() Error: associated data too long. (%u > %u bytes)\n", + __func__, req->assoclen, MAX_ASSOC_SIZE); + return -EINVAL; + } + + rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + rctx->parent = &req->base; + rctx->is_encrypt = is_encrypt; + rctx->bd_suppress = false; + rctx->total_todo = req->cryptlen; + rctx->src_sent = 0; + rctx->total_sent = 0; + rctx->total_received = 0; + rctx->is_sw_hmac = false; + rctx->ctx = ctx; + memset(&rctx->mb_mssg, 0, sizeof(struct brcm_message)); + + /* assoc data is at start of src sg */ + rctx->assoc = req->src; + + /* + * Init current position in src scatterlist to be after assoc data. + * src_skip set to buffer offset where data begins. (Assoc data could + * end in the middle of a buffer.) + */ + if (spu_sg_at_offset(req->src, req->assoclen, &rctx->src_sg, + &rctx->src_skip) < 0) { + pr_err("%s() Error: Unable to find start of src data\n", + __func__); + return -EINVAL; + } + + rctx->src_nents = 0; + rctx->dst_nents = 0; + if (req->dst == req->src) { + rctx->dst_sg = rctx->src_sg; + rctx->dst_skip = rctx->src_skip; + } else { + /* + * Expect req->dst to have room for assoc data followed by + * output data and ICV, if encrypt. So initialize dst_sg + * to point beyond assoc len offset. + */ + if (spu_sg_at_offset(req->dst, req->assoclen, &rctx->dst_sg, + &rctx->dst_skip) < 0) { + pr_err("%s() Error: Unable to find start of dst data\n", + __func__); + return -EINVAL; + } + } + + if (ctx->cipher.mode == CIPHER_MODE_CBC || + ctx->cipher.mode == CIPHER_MODE_CTR || + ctx->cipher.mode == CIPHER_MODE_OFB || + ctx->cipher.mode == CIPHER_MODE_XTS || + ctx->cipher.mode == CIPHER_MODE_GCM) { + rctx->iv_ctr_len = + ctx->salt_len + + crypto_aead_ivsize(crypto_aead_reqtfm(req)); + } else if (ctx->cipher.mode == CIPHER_MODE_CCM) { + rctx->iv_ctr_len = CCM_AES_IV_SIZE; + } else { + rctx->iv_ctr_len = 0; + } + + rctx->hash_carry_len = 0; + + flow_log(" src sg: %p\n", req->src); + flow_log(" rctx->src_sg: %p, src_skip %u\n", + rctx->src_sg, rctx->src_skip); + flow_log(" assoc: %p, assoclen %u\n", rctx->assoc, req->assoclen); + flow_log(" dst sg: %p\n", req->dst); + flow_log(" rctx->dst_sg: %p, dst_skip %u\n", + rctx->dst_sg, rctx->dst_skip); + flow_log(" iv_ctr_len:%u\n", rctx->iv_ctr_len); + flow_dump(" iv: ", req->iv, rctx->iv_ctr_len); + flow_log(" authkeylen:%u\n", ctx->authkeylen); + flow_log(" is_esp: %s\n", ctx->is_esp ? "yes" : "no"); + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + flow_log(" max_payload infinite"); + else + flow_log(" max_payload: %u\n", ctx->max_payload); + + if (unlikely(aead_need_fallback(req))) + return aead_do_fallback(req, is_encrypt); + + /* + * Do memory allocations for request after fallback check, because if we + * do fallback, we won't call finish_req() to dealloc. + */ + if (rctx->iv_ctr_len) { + if (ctx->salt_len) + memcpy(rctx->msg_buf.iv_ctr + ctx->salt_offset, + ctx->salt, ctx->salt_len); + memcpy(rctx->msg_buf.iv_ctr + ctx->salt_offset + ctx->salt_len, + req->iv, + rctx->iv_ctr_len - ctx->salt_len - ctx->salt_offset); + } + + rctx->chan_idx = select_channel(); + err = handle_aead_req(rctx); + if (err != -EINPROGRESS) + /* synchronous result */ + spu_chunk_cleanup(rctx); + + return err; +} + +static int aead_authenc_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + struct crypto_tfm *tfm = crypto_aead_tfm(cipher); + struct crypto_authenc_keys keys; + int ret; + + flow_log("%s() aead:%p key:%p keylen:%u\n", __func__, cipher, key, + keylen); + flow_dump(" key: ", key, keylen); + + ret = crypto_authenc_extractkeys(&keys, key, keylen); + if (ret) + goto badkey; + + if (keys.enckeylen > MAX_KEY_SIZE || + keys.authkeylen > MAX_KEY_SIZE) + goto badkey; + + ctx->enckeylen = keys.enckeylen; + ctx->authkeylen = keys.authkeylen; + + memcpy(ctx->enckey, keys.enckey, keys.enckeylen); + /* May end up padding auth key. So make sure it's zeroed. */ + memset(ctx->authkey, 0, sizeof(ctx->authkey)); + memcpy(ctx->authkey, keys.authkey, keys.authkeylen); + + switch (ctx->alg->cipher_info.alg) { + case CIPHER_ALG_DES: + if (verify_aead_des_key(cipher, keys.enckey, keys.enckeylen)) + return -EINVAL; + + ctx->cipher_type = CIPHER_TYPE_DES; + break; + case CIPHER_ALG_3DES: + if (verify_aead_des3_key(cipher, keys.enckey, keys.enckeylen)) + return -EINVAL; + + ctx->cipher_type = CIPHER_TYPE_3DES; + break; + case CIPHER_ALG_AES: + switch (ctx->enckeylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + goto badkey; + } + break; + default: + pr_err("%s() Error: Unknown cipher alg\n", __func__); + return -EINVAL; + } + + flow_log(" enckeylen:%u authkeylen:%u\n", ctx->enckeylen, + ctx->authkeylen); + flow_dump(" enc: ", ctx->enckey, ctx->enckeylen); + flow_dump(" auth: ", ctx->authkey, ctx->authkeylen); + + /* setkey the fallback just in case we needto use it */ + if (ctx->fallback_cipher) { + flow_log(" running fallback setkey()\n"); + + ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + ctx->fallback_cipher->base.crt_flags |= + tfm->crt_flags & CRYPTO_TFM_REQ_MASK; + ret = crypto_aead_setkey(ctx->fallback_cipher, key, keylen); + if (ret) + flow_log(" fallback setkey() returned:%d\n", ret); + } + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, + ctx->enckeylen, + false); + + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_AEAD]); + + return ret; + +badkey: + ctx->enckeylen = 0; + ctx->authkeylen = 0; + ctx->digestsize = 0; + + return -EINVAL; +} + +static int aead_gcm_ccm_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + struct crypto_tfm *tfm = crypto_aead_tfm(cipher); + + int ret = 0; + + flow_log("%s() keylen:%u\n", __func__, keylen); + flow_dump(" key: ", key, keylen); + + if (!ctx->is_esp) + ctx->digestsize = keylen; + + ctx->enckeylen = keylen; + ctx->authkeylen = 0; + + switch (ctx->enckeylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + goto badkey; + } + + memcpy(ctx->enckey, key, ctx->enckeylen); + + flow_log(" enckeylen:%u authkeylen:%u\n", ctx->enckeylen, + ctx->authkeylen); + flow_dump(" enc: ", ctx->enckey, ctx->enckeylen); + flow_dump(" auth: ", ctx->authkey, ctx->authkeylen); + + /* setkey the fallback just in case we need to use it */ + if (ctx->fallback_cipher) { + flow_log(" running fallback setkey()\n"); + + ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + ctx->fallback_cipher->base.crt_flags |= + tfm->crt_flags & CRYPTO_TFM_REQ_MASK; + ret = crypto_aead_setkey(ctx->fallback_cipher, key, + keylen + ctx->salt_len); + if (ret) + flow_log(" fallback setkey() returned:%d\n", ret); + } + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, + ctx->enckeylen, + false); + + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_AEAD]); + + flow_log(" enckeylen:%u authkeylen:%u\n", ctx->enckeylen, + ctx->authkeylen); + + return ret; + +badkey: + ctx->enckeylen = 0; + ctx->authkeylen = 0; + ctx->digestsize = 0; + + return -EINVAL; +} + +/** + * aead_gcm_esp_setkey() - setkey() operation for ESP variant of GCM AES. + * @cipher: AEAD structure + * @key: Key followed by 4 bytes of salt + * @keylen: Length of key plus salt, in bytes + * + * Extracts salt from key and stores it to be prepended to IV on each request. + * Digest is always 16 bytes + * + * Return: Value from generic gcm setkey. + */ +static int aead_gcm_esp_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + + flow_log("%s\n", __func__); + + if (keylen < GCM_ESP_SALT_SIZE) + return -EINVAL; + + ctx->salt_len = GCM_ESP_SALT_SIZE; + ctx->salt_offset = GCM_ESP_SALT_OFFSET; + memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE); + keylen -= GCM_ESP_SALT_SIZE; + ctx->digestsize = GCM_ESP_DIGESTSIZE; + ctx->is_esp = true; + flow_dump("salt: ", ctx->salt, GCM_ESP_SALT_SIZE); + + return aead_gcm_ccm_setkey(cipher, key, keylen); +} + +/** + * rfc4543_gcm_esp_setkey() - setkey operation for RFC4543 variant of GCM/GMAC. + * @cipher: AEAD structure + * @key: Key followed by 4 bytes of salt + * @keylen: Length of key plus salt, in bytes + * + * Extracts salt from key and stores it to be prepended to IV on each request. + * Digest is always 16 bytes + * + * Return: Value from generic gcm setkey. + */ +static int rfc4543_gcm_esp_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + + flow_log("%s\n", __func__); + + if (keylen < GCM_ESP_SALT_SIZE) + return -EINVAL; + + ctx->salt_len = GCM_ESP_SALT_SIZE; + ctx->salt_offset = GCM_ESP_SALT_OFFSET; + memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE); + keylen -= GCM_ESP_SALT_SIZE; + ctx->digestsize = GCM_ESP_DIGESTSIZE; + ctx->is_esp = true; + ctx->is_rfc4543 = true; + flow_dump("salt: ", ctx->salt, GCM_ESP_SALT_SIZE); + + return aead_gcm_ccm_setkey(cipher, key, keylen); +} + +/** + * aead_ccm_esp_setkey() - setkey() operation for ESP variant of CCM AES. + * @cipher: AEAD structure + * @key: Key followed by 4 bytes of salt + * @keylen: Length of key plus salt, in bytes + * + * Extracts salt from key and stores it to be prepended to IV on each request. + * Digest is always 16 bytes + * + * Return: Value from generic ccm setkey. + */ +static int aead_ccm_esp_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + + flow_log("%s\n", __func__); + + if (keylen < CCM_ESP_SALT_SIZE) + return -EINVAL; + + ctx->salt_len = CCM_ESP_SALT_SIZE; + ctx->salt_offset = CCM_ESP_SALT_OFFSET; + memcpy(ctx->salt, key + keylen - CCM_ESP_SALT_SIZE, CCM_ESP_SALT_SIZE); + keylen -= CCM_ESP_SALT_SIZE; + ctx->is_esp = true; + flow_dump("salt: ", ctx->salt, CCM_ESP_SALT_SIZE); + + return aead_gcm_ccm_setkey(cipher, key, keylen); +} + +static int aead_setauthsize(struct crypto_aead *cipher, unsigned int authsize) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + int ret = 0; + + flow_log("%s() authkeylen:%u authsize:%u\n", + __func__, ctx->authkeylen, authsize); + + ctx->digestsize = authsize; + + /* setkey the fallback just in case we needto use it */ + if (ctx->fallback_cipher) { + flow_log(" running fallback setauth()\n"); + + ret = crypto_aead_setauthsize(ctx->fallback_cipher, authsize); + if (ret) + flow_log(" fallback setauth() returned:%d\n", ret); + } + + return ret; +} + +static int aead_encrypt(struct aead_request *req) +{ + flow_log("%s() cryptlen:%u %08x\n", __func__, req->cryptlen, + req->cryptlen); + dump_sg(req->src, 0, req->cryptlen + req->assoclen); + flow_log(" assoc_len:%u\n", req->assoclen); + + return aead_enqueue(req, true); +} + +static int aead_decrypt(struct aead_request *req) +{ + flow_log("%s() cryptlen:%u\n", __func__, req->cryptlen); + dump_sg(req->src, 0, req->cryptlen + req->assoclen); + flow_log(" assoc_len:%u\n", req->assoclen); + + return aead_enqueue(req, false); +} + +/* ==================== Supported Cipher Algorithms ==================== */ + +static struct iproc_alg_s driver_algs[] = { + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "gcm(aes)", + .cra_driver_name = "gcm-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_gcm_ccm_setkey, + .ivsize = GCM_AES_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_GCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_GCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "ccm(aes)", + .cra_driver_name = "ccm-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_gcm_ccm_setkey, + .ivsize = CCM_AES_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_CCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "rfc4106(gcm(aes))", + .cra_driver_name = "gcm-aes-esp-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_gcm_esp_setkey, + .ivsize = GCM_RFC4106_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_GCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_GCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "rfc4309(ccm(aes))", + .cra_driver_name = "ccm-aes-esp-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_ccm_esp_setkey, + .ivsize = CCM_AES_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_CCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "rfc4543(gcm(aes))", + .cra_driver_name = "gmac-aes-esp-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = rfc4543_gcm_esp_setkey, + .ivsize = GCM_RFC4106_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_GCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_GCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(md5),cbc(aes))", + .cra_driver_name = "authenc-hmac-md5-cbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = MD5_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha1),cbc(aes))", + .cra_driver_name = "authenc-hmac-sha1-cbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = SHA1_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha256),cbc(aes))", + .cra_driver_name = "authenc-hmac-sha256-cbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = SHA256_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(md5),cbc(des))", + .cra_driver_name = "authenc-hmac-md5-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = MD5_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha1),cbc(des))", + .cra_driver_name = "authenc-hmac-sha1-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA1_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha224),cbc(des))", + .cra_driver_name = "authenc-hmac-sha224-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA224_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha256),cbc(des))", + .cra_driver_name = "authenc-hmac-sha256-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA256_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha384),cbc(des))", + .cra_driver_name = "authenc-hmac-sha384-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA384_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha512),cbc(des))", + .cra_driver_name = "authenc-hmac-sha512-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA512_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(md5),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-md5-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = MD5_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha1),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha1-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA1_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha224),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha224-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA224_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha256),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha256-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA256_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha384),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha384-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA384_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha512),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha512-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA512_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + +/* SKCIPHER algorithms. */ + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ofb(des)", + .base.cra_driver_name = "ofb-des-iproc", + .base.cra_blocksize = DES_BLOCK_SIZE, + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = DES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_OFB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "cbc(des)", + .base.cra_driver_name = "cbc-des-iproc", + .base.cra_blocksize = DES_BLOCK_SIZE, + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = DES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ecb(des)", + .base.cra_driver_name = "ecb-des-iproc", + .base.cra_blocksize = DES_BLOCK_SIZE, + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = 0, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_ECB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ofb(des3_ede)", + .base.cra_driver_name = "ofb-des3-iproc", + .base.cra_blocksize = DES3_EDE_BLOCK_SIZE, + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = DES3_EDE_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_OFB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "cbc(des3_ede)", + .base.cra_driver_name = "cbc-des3-iproc", + .base.cra_blocksize = DES3_EDE_BLOCK_SIZE, + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = DES3_EDE_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ecb(des3_ede)", + .base.cra_driver_name = "ecb-des3-iproc", + .base.cra_blocksize = DES3_EDE_BLOCK_SIZE, + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = 0, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_ECB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ofb(aes)", + .base.cra_driver_name = "ofb-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_OFB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "cbc(aes)", + .base.cra_driver_name = "cbc-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ecb(aes)", + .base.cra_driver_name = "ecb-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = 0, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_ECB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ctr(aes)", + .base.cra_driver_name = "ctr-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CTR, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, +{ + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "xts(aes)", + .base.cra_driver_name = "xts-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_XTS, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + +/* AHASH algorithms. */ + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = MD5_DIGEST_SIZE, + .halg.base = { + .cra_name = "md5", + .cra_driver_name = "md5-iproc", + .cra_blocksize = MD5_BLOCK_WORDS * 4, + .cra_flags = CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = MD5_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(md5)", + .cra_driver_name = "hmac-md5-iproc", + .cra_blocksize = MD5_BLOCK_WORDS * 4, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA1_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-iproc", + .cra_blocksize = SHA1_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HASH, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA1_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha1)", + .cra_driver_name = "hmac-sha1-iproc", + .cra_blocksize = SHA1_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA224_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-iproc", + .cra_blocksize = SHA224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HASH, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA224_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha224)", + .cra_driver_name = "hmac-sha224-iproc", + .cra_blocksize = SHA224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HMAC, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA256_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-iproc", + .cra_blocksize = SHA256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HASH, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA256_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha256)", + .cra_driver_name = "hmac-sha256-iproc", + .cra_blocksize = SHA256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA384_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha384", + .cra_driver_name = "sha384-iproc", + .cra_blocksize = SHA384_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA384_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha384)", + .cra_driver_name = "hmac-sha384-iproc", + .cra_blocksize = SHA384_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA512_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha512", + .cra_driver_name = "sha512-iproc", + .cra_blocksize = SHA512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA512_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha512)", + .cra_driver_name = "hmac-sha512-iproc", + .cra_blocksize = SHA512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_224_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-224", + .cra_driver_name = "sha3-224-iproc", + .cra_blocksize = SHA3_224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_224, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_224_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-224)", + .cra_driver_name = "hmac-sha3-224-iproc", + .cra_blocksize = SHA3_224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_224, + .mode = HASH_MODE_HMAC + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_256_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-256", + .cra_driver_name = "sha3-256-iproc", + .cra_blocksize = SHA3_256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_256, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_256_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-256)", + .cra_driver_name = "hmac-sha3-256-iproc", + .cra_blocksize = SHA3_256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_256, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_384_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-384", + .cra_driver_name = "sha3-384-iproc", + .cra_blocksize = SHA3_224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_384, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_384_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-384)", + .cra_driver_name = "hmac-sha3-384-iproc", + .cra_blocksize = SHA3_384_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_384, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_512_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-512", + .cra_driver_name = "sha3-512-iproc", + .cra_blocksize = SHA3_512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_512, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_512_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-512)", + .cra_driver_name = "hmac-sha3-512-iproc", + .cra_blocksize = SHA3_512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_512, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = AES_BLOCK_SIZE, + .halg.base = { + .cra_name = "xcbc(aes)", + .cra_driver_name = "xcbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_XCBC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = AES_BLOCK_SIZE, + .halg.base = { + .cra_name = "cmac(aes)", + .cra_driver_name = "cmac-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_CMAC, + }, + }, +}; + +static int generic_cra_init(struct crypto_tfm *tfm, + struct iproc_alg_s *cipher_alg) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + unsigned int blocksize = crypto_tfm_alg_blocksize(tfm); + + flow_log("%s()\n", __func__); + + ctx->alg = cipher_alg; + ctx->cipher = cipher_alg->cipher_info; + ctx->auth = cipher_alg->auth_info; + ctx->auth_first = cipher_alg->auth_first; + ctx->max_payload = spu->spu_ctx_max_payload(ctx->cipher.alg, + ctx->cipher.mode, + blocksize); + ctx->fallback_cipher = NULL; + + ctx->enckeylen = 0; + ctx->authkeylen = 0; + + atomic_inc(&iproc_priv.stream_count); + atomic_inc(&iproc_priv.session_count); + + return 0; +} + +static int skcipher_init_tfm(struct crypto_skcipher *skcipher) +{ + struct crypto_tfm *tfm = crypto_skcipher_tfm(skcipher); + struct skcipher_alg *alg = crypto_skcipher_alg(skcipher); + struct iproc_alg_s *cipher_alg; + + flow_log("%s()\n", __func__); + + crypto_skcipher_set_reqsize(skcipher, sizeof(struct iproc_reqctx_s)); + + cipher_alg = container_of(alg, struct iproc_alg_s, alg.skcipher); + return generic_cra_init(tfm, cipher_alg); +} + +static int ahash_cra_init(struct crypto_tfm *tfm) +{ + int err; + struct crypto_alg *alg = tfm->__crt_alg; + struct iproc_alg_s *cipher_alg; + + cipher_alg = container_of(__crypto_ahash_alg(alg), struct iproc_alg_s, + alg.hash); + + err = generic_cra_init(tfm, cipher_alg); + flow_log("%s()\n", __func__); + + /* + * export state size has to be < 512 bytes. So don't include msg bufs + * in state size. + */ + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), + sizeof(struct iproc_reqctx_s)); + + return err; +} + +static int aead_cra_init(struct crypto_aead *aead) +{ + unsigned int reqsize = sizeof(struct iproc_reqctx_s); + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + struct crypto_alg *alg = tfm->__crt_alg; + struct aead_alg *aalg = container_of(alg, struct aead_alg, base); + struct iproc_alg_s *cipher_alg = container_of(aalg, struct iproc_alg_s, + alg.aead); + + int err = generic_cra_init(tfm, cipher_alg); + + flow_log("%s()\n", __func__); + + ctx->is_esp = false; + ctx->salt_len = 0; + ctx->salt_offset = 0; + + /* random first IV */ + get_random_bytes(ctx->iv, MAX_IV_SIZE); + flow_dump(" iv: ", ctx->iv, MAX_IV_SIZE); + + if (err) + goto out; + + if (!(alg->cra_flags & CRYPTO_ALG_NEED_FALLBACK)) + goto reqsize; + + flow_log("%s() creating fallback cipher\n", __func__); + + ctx->fallback_cipher = crypto_alloc_aead(alg->cra_name, 0, + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_NEED_FALLBACK); + if (IS_ERR(ctx->fallback_cipher)) { + pr_err("%s() Error: failed to allocate fallback for %s\n", + __func__, alg->cra_name); + return PTR_ERR(ctx->fallback_cipher); + } + + reqsize += crypto_aead_reqsize(ctx->fallback_cipher); + +reqsize: + crypto_aead_set_reqsize(aead, reqsize); + +out: + return err; +} + +static void generic_cra_exit(struct crypto_tfm *tfm) +{ + atomic_dec(&iproc_priv.session_count); +} + +static void skcipher_exit_tfm(struct crypto_skcipher *tfm) +{ + generic_cra_exit(crypto_skcipher_tfm(tfm)); +} + +static void aead_cra_exit(struct crypto_aead *aead) +{ + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + + generic_cra_exit(tfm); + + if (ctx->fallback_cipher) { + crypto_free_aead(ctx->fallback_cipher); + ctx->fallback_cipher = NULL; + } +} + +/** + * spu_functions_register() - Specify hardware-specific SPU functions based on + * SPU type read from device tree. + * @dev: device structure + * @spu_type: SPU hardware generation + * @spu_subtype: SPU hardware version + */ +static void spu_functions_register(struct device *dev, + enum spu_spu_type spu_type, + enum spu_spu_subtype spu_subtype) +{ + struct spu_hw *spu = &iproc_priv.spu; + + if (spu_type == SPU_TYPE_SPUM) { + dev_dbg(dev, "Registering SPUM functions"); + spu->spu_dump_msg_hdr = spum_dump_msg_hdr; + spu->spu_payload_length = spum_payload_length; + spu->spu_response_hdr_len = spum_response_hdr_len; + spu->spu_hash_pad_len = spum_hash_pad_len; + spu->spu_gcm_ccm_pad_len = spum_gcm_ccm_pad_len; + spu->spu_assoc_resp_len = spum_assoc_resp_len; + spu->spu_aead_ivlen = spum_aead_ivlen; + spu->spu_hash_type = spum_hash_type; + spu->spu_digest_size = spum_digest_size; + spu->spu_create_request = spum_create_request; + spu->spu_cipher_req_init = spum_cipher_req_init; + spu->spu_cipher_req_finish = spum_cipher_req_finish; + spu->spu_request_pad = spum_request_pad; + spu->spu_tx_status_len = spum_tx_status_len; + spu->spu_rx_status_len = spum_rx_status_len; + spu->spu_status_process = spum_status_process; + spu->spu_xts_tweak_in_payload = spum_xts_tweak_in_payload; + spu->spu_ccm_update_iv = spum_ccm_update_iv; + spu->spu_wordalign_padlen = spum_wordalign_padlen; + if (spu_subtype == SPU_SUBTYPE_SPUM_NS2) + spu->spu_ctx_max_payload = spum_ns2_ctx_max_payload; + else + spu->spu_ctx_max_payload = spum_nsp_ctx_max_payload; + } else { + dev_dbg(dev, "Registering SPU2 functions"); + spu->spu_dump_msg_hdr = spu2_dump_msg_hdr; + spu->spu_ctx_max_payload = spu2_ctx_max_payload; + spu->spu_payload_length = spu2_payload_length; + spu->spu_response_hdr_len = spu2_response_hdr_len; + spu->spu_hash_pad_len = spu2_hash_pad_len; + spu->spu_gcm_ccm_pad_len = spu2_gcm_ccm_pad_len; + spu->spu_assoc_resp_len = spu2_assoc_resp_len; + spu->spu_aead_ivlen = spu2_aead_ivlen; + spu->spu_hash_type = spu2_hash_type; + spu->spu_digest_size = spu2_digest_size; + spu->spu_create_request = spu2_create_request; + spu->spu_cipher_req_init = spu2_cipher_req_init; + spu->spu_cipher_req_finish = spu2_cipher_req_finish; + spu->spu_request_pad = spu2_request_pad; + spu->spu_tx_status_len = spu2_tx_status_len; + spu->spu_rx_status_len = spu2_rx_status_len; + spu->spu_status_process = spu2_status_process; + spu->spu_xts_tweak_in_payload = spu2_xts_tweak_in_payload; + spu->spu_ccm_update_iv = spu2_ccm_update_iv; + spu->spu_wordalign_padlen = spu2_wordalign_padlen; + } +} + +/** + * spu_mb_init() - Initialize mailbox client. Request ownership of a mailbox + * channel for the SPU being probed. + * @dev: SPU driver device structure + * + * Return: 0 if successful + * < 0 otherwise + */ +static int spu_mb_init(struct device *dev) +{ + struct mbox_client *mcl = &iproc_priv.mcl; + int err, i; + + iproc_priv.mbox = devm_kcalloc(dev, iproc_priv.spu.num_chan, + sizeof(struct mbox_chan *), GFP_KERNEL); + if (!iproc_priv.mbox) + return -ENOMEM; + + mcl->dev = dev; + mcl->tx_block = false; + mcl->tx_tout = 0; + mcl->knows_txdone = true; + mcl->rx_callback = spu_rx_callback; + mcl->tx_done = NULL; + + for (i = 0; i < iproc_priv.spu.num_chan; i++) { + iproc_priv.mbox[i] = mbox_request_channel(mcl, i); + if (IS_ERR(iproc_priv.mbox[i])) { + err = PTR_ERR(iproc_priv.mbox[i]); + dev_err(dev, + "Mbox channel %d request failed with err %d", + i, err); + iproc_priv.mbox[i] = NULL; + goto free_channels; + } + } + + return 0; +free_channels: + for (i = 0; i < iproc_priv.spu.num_chan; i++) { + if (iproc_priv.mbox[i]) + mbox_free_channel(iproc_priv.mbox[i]); + } + + return err; +} + +static void spu_mb_release(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < iproc_priv.spu.num_chan; i++) + mbox_free_channel(iproc_priv.mbox[i]); +} + +static void spu_counters_init(void) +{ + int i; + int j; + + atomic_set(&iproc_priv.session_count, 0); + atomic_set(&iproc_priv.stream_count, 0); + atomic_set(&iproc_priv.next_chan, (int)iproc_priv.spu.num_chan); + atomic64_set(&iproc_priv.bytes_in, 0); + atomic64_set(&iproc_priv.bytes_out, 0); + for (i = 0; i < SPU_OP_NUM; i++) { + atomic_set(&iproc_priv.op_counts[i], 0); + atomic_set(&iproc_priv.setkey_cnt[i], 0); + } + for (i = 0; i < CIPHER_ALG_LAST; i++) + for (j = 0; j < CIPHER_MODE_LAST; j++) + atomic_set(&iproc_priv.cipher_cnt[i][j], 0); + + for (i = 0; i < HASH_ALG_LAST; i++) { + atomic_set(&iproc_priv.hash_cnt[i], 0); + atomic_set(&iproc_priv.hmac_cnt[i], 0); + } + for (i = 0; i < AEAD_TYPE_LAST; i++) + atomic_set(&iproc_priv.aead_cnt[i], 0); + + atomic_set(&iproc_priv.mb_no_spc, 0); + atomic_set(&iproc_priv.mb_send_fail, 0); + atomic_set(&iproc_priv.bad_icv, 0); +} + +static int spu_register_skcipher(struct iproc_alg_s *driver_alg) +{ + struct skcipher_alg *crypto = &driver_alg->alg.skcipher; + int err; + + crypto->base.cra_module = THIS_MODULE; + crypto->base.cra_priority = cipher_pri; + crypto->base.cra_alignmask = 0; + crypto->base.cra_ctxsize = sizeof(struct iproc_ctx_s); + crypto->base.cra_flags = CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY | + CRYPTO_ALG_KERN_DRIVER_ONLY; + + crypto->init = skcipher_init_tfm; + crypto->exit = skcipher_exit_tfm; + crypto->setkey = skcipher_setkey; + crypto->encrypt = skcipher_encrypt; + crypto->decrypt = skcipher_decrypt; + + err = crypto_register_skcipher(crypto); + /* Mark alg as having been registered, if successful */ + if (err == 0) + driver_alg->registered = true; + pr_debug(" registered skcipher %s\n", crypto->base.cra_driver_name); + return err; +} + +static int spu_register_ahash(struct iproc_alg_s *driver_alg) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct ahash_alg *hash = &driver_alg->alg.hash; + int err; + + /* AES-XCBC is the only AES hash type currently supported on SPU-M */ + if ((driver_alg->auth_info.alg == HASH_ALG_AES) && + (driver_alg->auth_info.mode != HASH_MODE_XCBC) && + (spu->spu_type == SPU_TYPE_SPUM)) + return 0; + + /* SHA3 algorithm variants are not registered for SPU-M or SPU2. */ + if ((driver_alg->auth_info.alg >= HASH_ALG_SHA3_224) && + (spu->spu_subtype != SPU_SUBTYPE_SPU2_V2)) + return 0; + + hash->halg.base.cra_module = THIS_MODULE; + hash->halg.base.cra_priority = hash_pri; + hash->halg.base.cra_alignmask = 0; + hash->halg.base.cra_ctxsize = sizeof(struct iproc_ctx_s); + hash->halg.base.cra_init = ahash_cra_init; + hash->halg.base.cra_exit = generic_cra_exit; + hash->halg.base.cra_flags = CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY; + hash->halg.statesize = sizeof(struct spu_hash_export_s); + + if (driver_alg->auth_info.mode != HASH_MODE_HMAC) { + hash->init = ahash_init; + hash->update = ahash_update; + hash->final = ahash_final; + hash->finup = ahash_finup; + hash->digest = ahash_digest; + if ((driver_alg->auth_info.alg == HASH_ALG_AES) && + ((driver_alg->auth_info.mode == HASH_MODE_XCBC) || + (driver_alg->auth_info.mode == HASH_MODE_CMAC))) { + hash->setkey = ahash_setkey; + } + } else { + hash->setkey = ahash_hmac_setkey; + hash->init = ahash_hmac_init; + hash->update = ahash_hmac_update; + hash->final = ahash_hmac_final; + hash->finup = ahash_hmac_finup; + hash->digest = ahash_hmac_digest; + } + hash->export = ahash_export; + hash->import = ahash_import; + + err = crypto_register_ahash(hash); + /* Mark alg as having been registered, if successful */ + if (err == 0) + driver_alg->registered = true; + pr_debug(" registered ahash %s\n", + hash->halg.base.cra_driver_name); + return err; +} + +static int spu_register_aead(struct iproc_alg_s *driver_alg) +{ + struct aead_alg *aead = &driver_alg->alg.aead; + int err; + + aead->base.cra_module = THIS_MODULE; + aead->base.cra_priority = aead_pri; + aead->base.cra_alignmask = 0; + aead->base.cra_ctxsize = sizeof(struct iproc_ctx_s); + + aead->base.cra_flags |= CRYPTO_ALG_ASYNC | CRYPTO_ALG_ALLOCATES_MEMORY; + /* setkey set in alg initialization */ + aead->setauthsize = aead_setauthsize; + aead->encrypt = aead_encrypt; + aead->decrypt = aead_decrypt; + aead->init = aead_cra_init; + aead->exit = aead_cra_exit; + + err = crypto_register_aead(aead); + /* Mark alg as having been registered, if successful */ + if (err == 0) + driver_alg->registered = true; + pr_debug(" registered aead %s\n", aead->base.cra_driver_name); + return err; +} + +/* register crypto algorithms the device supports */ +static int spu_algs_register(struct device *dev) +{ + int i, j; + int err; + + for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { + switch (driver_algs[i].type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + err = spu_register_skcipher(&driver_algs[i]); + break; + case CRYPTO_ALG_TYPE_AHASH: + err = spu_register_ahash(&driver_algs[i]); + break; + case CRYPTO_ALG_TYPE_AEAD: + err = spu_register_aead(&driver_algs[i]); + break; + default: + dev_err(dev, + "iproc-crypto: unknown alg type: %d", + driver_algs[i].type); + err = -EINVAL; + } + + if (err) { + dev_err(dev, "alg registration failed with error %d\n", + err); + goto err_algs; + } + } + + return 0; + +err_algs: + for (j = 0; j < i; j++) { + /* Skip any algorithm not registered */ + if (!driver_algs[j].registered) + continue; + switch (driver_algs[j].type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + crypto_unregister_skcipher(&driver_algs[j].alg.skcipher); + driver_algs[j].registered = false; + break; + case CRYPTO_ALG_TYPE_AHASH: + crypto_unregister_ahash(&driver_algs[j].alg.hash); + driver_algs[j].registered = false; + break; + case CRYPTO_ALG_TYPE_AEAD: + crypto_unregister_aead(&driver_algs[j].alg.aead); + driver_algs[j].registered = false; + break; + } + } + return err; +} + +/* ==================== Kernel Platform API ==================== */ + +static struct spu_type_subtype spum_ns2_types = { + SPU_TYPE_SPUM, SPU_SUBTYPE_SPUM_NS2 +}; + +static struct spu_type_subtype spum_nsp_types = { + SPU_TYPE_SPUM, SPU_SUBTYPE_SPUM_NSP +}; + +static struct spu_type_subtype spu2_types = { + SPU_TYPE_SPU2, SPU_SUBTYPE_SPU2_V1 +}; + +static struct spu_type_subtype spu2_v2_types = { + SPU_TYPE_SPU2, SPU_SUBTYPE_SPU2_V2 +}; + +static const struct of_device_id bcm_spu_dt_ids[] = { + { + .compatible = "brcm,spum-crypto", + .data = &spum_ns2_types, + }, + { + .compatible = "brcm,spum-nsp-crypto", + .data = &spum_nsp_types, + }, + { + .compatible = "brcm,spu2-crypto", + .data = &spu2_types, + }, + { + .compatible = "brcm,spu2-v2-crypto", + .data = &spu2_v2_types, + }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, bcm_spu_dt_ids); + +static int spu_dt_read(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spu_hw *spu = &iproc_priv.spu; + struct resource *spu_ctrl_regs; + const struct spu_type_subtype *matched_spu_type; + struct device_node *dn = pdev->dev.of_node; + int err, i; + + /* Count number of mailbox channels */ + spu->num_chan = of_count_phandle_with_args(dn, "mboxes", "#mbox-cells"); + + matched_spu_type = of_device_get_match_data(dev); + if (!matched_spu_type) { + dev_err(dev, "Failed to match device\n"); + return -ENODEV; + } + + spu->spu_type = matched_spu_type->type; + spu->spu_subtype = matched_spu_type->subtype; + + for (i = 0; (i < MAX_SPUS) && ((spu_ctrl_regs = + platform_get_resource(pdev, IORESOURCE_MEM, i)) != NULL); i++) { + + spu->reg_vbase[i] = devm_ioremap_resource(dev, spu_ctrl_regs); + if (IS_ERR(spu->reg_vbase[i])) { + err = PTR_ERR(spu->reg_vbase[i]); + dev_err(dev, "Failed to map registers: %d\n", + err); + spu->reg_vbase[i] = NULL; + return err; + } + } + spu->num_spu = i; + dev_dbg(dev, "Device has %d SPUs", spu->num_spu); + + return 0; +} + +static int bcm_spu_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spu_hw *spu = &iproc_priv.spu; + int err; + + iproc_priv.pdev = pdev; + platform_set_drvdata(iproc_priv.pdev, + &iproc_priv); + + err = spu_dt_read(pdev); + if (err < 0) + goto failure; + + err = spu_mb_init(dev); + if (err < 0) + goto failure; + + if (spu->spu_type == SPU_TYPE_SPUM) + iproc_priv.bcm_hdr_len = 8; + else if (spu->spu_type == SPU_TYPE_SPU2) + iproc_priv.bcm_hdr_len = 0; + + spu_functions_register(dev, spu->spu_type, spu->spu_subtype); + + spu_counters_init(); + + spu_setup_debugfs(); + + err = spu_algs_register(dev); + if (err < 0) + goto fail_reg; + + return 0; + +fail_reg: + spu_free_debugfs(); +failure: + spu_mb_release(pdev); + dev_err(dev, "%s failed with error %d.\n", __func__, err); + + return err; +} + +static int bcm_spu_remove(struct platform_device *pdev) +{ + int i; + struct device *dev = &pdev->dev; + char *cdn; + + for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { + /* + * Not all algorithms were registered, depending on whether + * hardware is SPU or SPU2. So here we make sure to skip + * those algorithms that were not previously registered. + */ + if (!driver_algs[i].registered) + continue; + + switch (driver_algs[i].type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + crypto_unregister_skcipher(&driver_algs[i].alg.skcipher); + dev_dbg(dev, " unregistered cipher %s\n", + driver_algs[i].alg.skcipher.base.cra_driver_name); + driver_algs[i].registered = false; + break; + case CRYPTO_ALG_TYPE_AHASH: + crypto_unregister_ahash(&driver_algs[i].alg.hash); + cdn = driver_algs[i].alg.hash.halg.base.cra_driver_name; + dev_dbg(dev, " unregistered hash %s\n", cdn); + driver_algs[i].registered = false; + break; + case CRYPTO_ALG_TYPE_AEAD: + crypto_unregister_aead(&driver_algs[i].alg.aead); + dev_dbg(dev, " unregistered aead %s\n", + driver_algs[i].alg.aead.base.cra_driver_name); + driver_algs[i].registered = false; + break; + } + } + spu_free_debugfs(); + spu_mb_release(pdev); + return 0; +} + +/* ===== Kernel Module API ===== */ + +static struct platform_driver bcm_spu_pdriver = { + .driver = { + .name = "brcm-spu-crypto", + .of_match_table = of_match_ptr(bcm_spu_dt_ids), + }, + .probe = bcm_spu_probe, + .remove = bcm_spu_remove, +}; +module_platform_driver(bcm_spu_pdriver); + +MODULE_AUTHOR("Rob Rice "); +MODULE_DESCRIPTION("Broadcom symmetric crypto offload driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3