From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/edac/amd64_edac.h | 529 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 529 insertions(+) create mode 100644 drivers/edac/amd64_edac.h (limited to 'drivers/edac/amd64_edac.h') diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h new file mode 100644 index 000000000..5a4e4a596 --- /dev/null +++ b/drivers/edac/amd64_edac.h @@ -0,0 +1,529 @@ +/* + * AMD64 class Memory Controller kernel module + * + * Copyright (c) 2009 SoftwareBitMaker. + * Copyright (c) 2009-15 Advanced Micro Devices, Inc. + * + * This file may be distributed under the terms of the + * GNU General Public License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "edac_module.h" +#include "mce_amd.h" + +#define amd64_info(fmt, arg...) \ + edac_printk(KERN_INFO, "amd64", fmt, ##arg) + +#define amd64_warn(fmt, arg...) \ + edac_printk(KERN_WARNING, "amd64", "Warning: " fmt, ##arg) + +#define amd64_err(fmt, arg...) \ + edac_printk(KERN_ERR, "amd64", "Error: " fmt, ##arg) + +#define amd64_mc_warn(mci, fmt, arg...) \ + edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg) + +#define amd64_mc_err(mci, fmt, arg...) \ + edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg) + +/* + * Throughout the comments in this code, the following terms are used: + * + * SysAddr, DramAddr, and InputAddr + * + * These terms come directly from the amd64 documentation + * (AMD publication #26094). They are defined as follows: + * + * SysAddr: + * This is a physical address generated by a CPU core or a device + * doing DMA. If generated by a CPU core, a SysAddr is the result of + * a virtual to physical address translation by the CPU core's address + * translation mechanism (MMU). + * + * DramAddr: + * A DramAddr is derived from a SysAddr by subtracting an offset that + * depends on which node the SysAddr maps to and whether the SysAddr + * is within a range affected by memory hoisting. The DRAM Base + * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers + * determine which node a SysAddr maps to. + * + * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr + * is within the range of addresses specified by this register, then + * a value x from the DHAR is subtracted from the SysAddr to produce a + * DramAddr. Here, x represents the base address for the node that + * the SysAddr maps to plus an offset due to memory hoisting. See + * section 3.4.8 and the comments in amd64_get_dram_hole_info() and + * sys_addr_to_dram_addr() below for more information. + * + * If the SysAddr is not affected by the DHAR then a value y is + * subtracted from the SysAddr to produce a DramAddr. Here, y is the + * base address for the node that the SysAddr maps to. See section + * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more + * information. + * + * InputAddr: + * A DramAddr is translated to an InputAddr before being passed to the + * memory controller for the node that the DramAddr is associated + * with. The memory controller then maps the InputAddr to a csrow. + * If node interleaving is not in use, then the InputAddr has the same + * value as the DramAddr. Otherwise, the InputAddr is produced by + * discarding the bits used for node interleaving from the DramAddr. + * See section 3.4.4 for more information. + * + * The memory controller for a given node uses its DRAM CS Base and + * DRAM CS Mask registers to map an InputAddr to a csrow. See + * sections 3.5.4 and 3.5.5 for more information. + */ + +#define EDAC_MOD_STR "amd64_edac" + +/* Extended Model from CPUID, for CPU Revision numbers */ +#define K8_REV_D 1 +#define K8_REV_E 2 +#define K8_REV_F 4 + +/* Hardware limit on ChipSelect rows per MC and processors per system */ +#define NUM_CHIPSELECTS 8 +#define DRAM_RANGES 8 +#define NUM_CONTROLLERS 12 + +#define ON true +#define OFF false + +/* + * PCI-defined configuration space registers + */ +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c +#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571 +#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572 +#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531 +#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582 + +/* + * Function 1 - Address Map + */ +#define DRAM_BASE_LO 0x40 +#define DRAM_LIMIT_LO 0x44 + +/* + * F15 M30h D18F1x2[1C:00] + */ +#define DRAM_CONT_BASE 0x200 +#define DRAM_CONT_LIMIT 0x204 + +/* + * F15 M30h D18F1x2[4C:40] + */ +#define DRAM_CONT_HIGH_OFF 0x240 + +#define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3)) +#define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7)) +#define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7)) + +#define DHAR 0xf0 +#define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1)) +#define dhar_base(pvt) ((pvt)->dhar & 0xff000000) +#define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16) + + /* NOTE: Extra mask bit vs K8 */ +#define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16) + +#define DCT_CFG_SEL 0x10C + +#define DRAM_LOCAL_NODE_BASE 0x120 +#define DRAM_LOCAL_NODE_LIM 0x124 + +#define DRAM_BASE_HI 0x140 +#define DRAM_LIMIT_HI 0x144 + + +/* + * Function 2 - DRAM controller + */ +#define DCSB0 0x40 +#define DCSB1 0x140 +#define DCSB_CS_ENABLE BIT(0) + +#define DCSM0 0x60 +#define DCSM1 0x160 + +#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE) +#define csrow_sec_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases_sec[(i)] & DCSB_CS_ENABLE) + +#define DRAM_CONTROL 0x78 + +#define DBAM0 0x80 +#define DBAM1 0x180 + +/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */ +#define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF) + +#define DBAM_MAX_VALUE 11 + +#define DCLR0 0x90 +#define DCLR1 0x190 +#define REVE_WIDTH_128 BIT(16) +#define WIDTH_128 BIT(11) + +#define DCHR0 0x94 +#define DCHR1 0x194 +#define DDR3_MODE BIT(8) + +#define DCT_SEL_LO 0x110 +#define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0)) +#define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2)) + +#define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4))) + +#define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5)) +#define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10)) + +#define SWAP_INTLV_REG 0x10c + +#define DCT_SEL_HI 0x114 + +#define F15H_M60H_SCRCTRL 0x1C8 + +/* + * Function 3 - Misc Control + */ +#define NBCTL 0x40 + +#define NBCFG 0x44 +#define NBCFG_CHIPKILL BIT(23) +#define NBCFG_ECC_ENABLE BIT(22) + +/* F3x48: NBSL */ +#define F10_NBSL_EXT_ERR_ECC 0x8 +#define NBSL_PP_OBS 0x2 + +#define SCRCTRL 0x58 + +#define F10_ONLINE_SPARE 0xB0 +#define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1) +#define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7) + +#define F10_NB_ARRAY_ADDR 0xB8 +#define F10_NB_ARRAY_DRAM BIT(31) + +/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */ +#define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1) + +#define F10_NB_ARRAY_DATA 0xBC +#define F10_NB_ARR_ECC_WR_REQ BIT(17) +#define SET_NB_DRAM_INJECTION_WRITE(inj) \ + (BIT(((inj.word) & 0xF) + 20) | \ + F10_NB_ARR_ECC_WR_REQ | inj.bit_map) +#define SET_NB_DRAM_INJECTION_READ(inj) \ + (BIT(((inj.word) & 0xF) + 20) | \ + BIT(16) | inj.bit_map) + + +#define NBCAP 0xE8 +#define NBCAP_CHIPKILL BIT(4) +#define NBCAP_SECDED BIT(3) +#define NBCAP_DCT_DUAL BIT(0) + +#define EXT_NB_MCA_CFG 0x180 + +/* MSRs */ +#define MSR_MCGCTL_NBE BIT(4) + +/* F17h */ + +/* F0: */ +#define DF_DHAR 0x104 + +/* UMC CH register offsets */ +#define UMCCH_BASE_ADDR 0x0 +#define UMCCH_BASE_ADDR_SEC 0x10 +#define UMCCH_ADDR_MASK 0x20 +#define UMCCH_ADDR_MASK_SEC 0x28 +#define UMCCH_ADDR_MASK_SEC_DDR5 0x30 +#define UMCCH_ADDR_CFG 0x30 +#define UMCCH_ADDR_CFG_DDR5 0x40 +#define UMCCH_DIMM_CFG 0x80 +#define UMCCH_DIMM_CFG_DDR5 0x90 +#define UMCCH_UMC_CFG 0x100 +#define UMCCH_SDP_CTRL 0x104 +#define UMCCH_ECC_CTRL 0x14C +#define UMCCH_ECC_BAD_SYMBOL 0xD90 +#define UMCCH_UMC_CAP 0xDF0 +#define UMCCH_UMC_CAP_HI 0xDF4 + +/* UMC CH bitfields */ +#define UMC_ECC_CHIPKILL_CAP BIT(31) +#define UMC_ECC_ENABLED BIT(30) + +#define UMC_SDP_INIT BIT(31) + +/* Error injection control structure */ +struct error_injection { + u32 section; + u32 word; + u32 bit_map; +}; + +/* low and high part of PCI config space regs */ +struct reg_pair { + u32 lo, hi; +}; + +/* + * See F1x[1, 0][7C:40] DRAM Base/Limit Registers + */ +struct dram_range { + struct reg_pair base; + struct reg_pair lim; +}; + +/* A DCT chip selects collection */ +struct chip_select { + u32 csbases[NUM_CHIPSELECTS]; + u32 csbases_sec[NUM_CHIPSELECTS]; + u8 b_cnt; + + u32 csmasks[NUM_CHIPSELECTS]; + u32 csmasks_sec[NUM_CHIPSELECTS]; + u8 m_cnt; +}; + +struct amd64_umc { + u32 dimm_cfg; /* DIMM Configuration reg */ + u32 umc_cfg; /* Configuration reg */ + u32 sdp_ctrl; /* SDP Control reg */ + u32 ecc_ctrl; /* DRAM ECC Control reg */ + u32 umc_cap_hi; /* Capabilities High reg */ + + /* cache the dram_type */ + enum mem_type dram_type; +}; + +struct amd64_family_flags { + /* + * Indicates that the system supports the new register offsets, etc. + * first introduced with Family 19h Model 10h. + */ + __u64 zn_regs_v2 : 1, + + __reserved : 63; +}; + +struct amd64_pvt { + struct low_ops *ops; + + /* pci_device handles which we utilize */ + struct pci_dev *F1, *F2, *F3; + + u16 mc_node_id; /* MC index of this MC node */ + u8 fam; /* CPU family */ + u8 model; /* ... model */ + u8 stepping; /* ... stepping */ + + int ext_model; /* extended model value of this node */ + + /* Raw registers */ + u32 dclr0; /* DRAM Configuration Low DCT0 reg */ + u32 dclr1; /* DRAM Configuration Low DCT1 reg */ + u32 dchr0; /* DRAM Configuration High DCT0 reg */ + u32 dchr1; /* DRAM Configuration High DCT1 reg */ + u32 nbcap; /* North Bridge Capabilities */ + u32 nbcfg; /* F10 North Bridge Configuration */ + u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */ + u32 dhar; /* DRAM Hoist reg */ + u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */ + u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */ + + /* one for each DCT/UMC */ + struct chip_select csels[NUM_CONTROLLERS]; + + /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */ + struct dram_range ranges[DRAM_RANGES]; + + u64 top_mem; /* top of memory below 4GB */ + u64 top_mem2; /* top of memory above 4GB */ + + u32 dct_sel_lo; /* DRAM Controller Select Low */ + u32 dct_sel_hi; /* DRAM Controller Select High */ + u32 online_spare; /* On-Line spare Reg */ + + /* x4, x8, or x16 syndromes in use */ + u8 ecc_sym_sz; + + const char *ctl_name; + u16 f1_id, f2_id; + /* Maximum number of memory controllers per die/node. */ + u8 max_mcs; + + struct amd64_family_flags flags; + /* place to store error injection parameters prior to issue */ + struct error_injection injection; + + /* + * cache the dram_type + * + * NOTE: Don't use this for Family 17h and later. + * Use dram_type in struct amd64_umc instead. + */ + enum mem_type dram_type; + + struct amd64_umc *umc; /* UMC registers */ +}; + +enum err_codes { + DECODE_OK = 0, + ERR_NODE = -1, + ERR_CSROW = -2, + ERR_CHANNEL = -3, + ERR_SYND = -4, + ERR_NORM_ADDR = -5, +}; + +struct err_info { + int err_code; + struct mem_ctl_info *src_mci; + int csrow; + int channel; + u16 syndrome; + u32 page; + u32 offset; +}; + +static inline u32 get_umc_base(u8 channel) +{ + /* chY: 0xY50000 */ + return 0x50000 + (channel << 20); +} + +static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i) +{ + u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8; + + if (boot_cpu_data.x86 == 0xf) + return addr; + + return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr; +} + +static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i) +{ + u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff; + + if (boot_cpu_data.x86 == 0xf) + return lim; + + return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim; +} + +static inline u16 extract_syndrome(u64 status) +{ + return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00); +} + +static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) + return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) | + ((pvt->dct_sel_lo >> 6) & 0x3); + + return ((pvt)->dct_sel_lo >> 6) & 0x3; +} +/* + * per-node ECC settings descriptor + */ +struct ecc_settings { + u32 old_nbctl; + bool nbctl_valid; + + struct flags { + unsigned long nb_mce_enable:1; + unsigned long nb_ecc_prev:1; + } flags; +}; + +/* + * Each of the PCI Device IDs types have their own set of hardware accessor + * functions and per device encoding/decoding logic. + */ +struct low_ops { + void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci, u64 sys_addr, + struct err_info *err); + int (*dbam_to_cs)(struct amd64_pvt *pvt, u8 dct, + unsigned int cs_mode, int cs_mask_nr); + int (*hw_info_get)(struct amd64_pvt *pvt); + bool (*ecc_enabled)(struct amd64_pvt *pvt); + void (*setup_mci_misc_attrs)(struct mem_ctl_info *mci); + void (*dump_misc_regs)(struct amd64_pvt *pvt); + void (*get_err_info)(struct mce *m, struct err_info *err); +}; + +int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 *val, const char *func); +int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 val, const char *func); + +#define amd64_read_pci_cfg(pdev, offset, val) \ + __amd64_read_pci_cfg_dword(pdev, offset, val, __func__) + +#define amd64_write_pci_cfg(pdev, offset, val) \ + __amd64_write_pci_cfg_dword(pdev, offset, val, __func__) + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +/* Injection helpers */ +static inline void disable_caches(void *dummy) +{ + write_cr0(read_cr0() | X86_CR0_CD); + wbinvd(); +} + +static inline void enable_caches(void *dummy) +{ + write_cr0(read_cr0() & ~X86_CR0_CD); +} + +static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp); + return (u8) tmp & 0xF; + } + return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7; +} + +static inline u8 dhar_valid(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); + return (tmp >> 1) & BIT(0); + } + return (pvt)->dhar & BIT(0); +} + +static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); + return (tmp >> 11) & 0x1FFF; + } + return (pvt)->dct_sel_lo & 0xFFFFF800; +} -- cgit v1.2.3