From 85c675d0d09a45a135bddd15d7b385f8758c32fb Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:35:05 +0200 Subject: Adding upstream version 6.7.7. Signed-off-by: Daniel Baumann --- drivers/firmware/qcom/qcom_scm.c | 1943 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1943 insertions(+) create mode 100644 drivers/firmware/qcom/qcom_scm.c (limited to 'drivers/firmware/qcom/qcom_scm.c') diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c new file mode 100644 index 0000000000..520de9b563 --- /dev/null +++ b/drivers/firmware/qcom/qcom_scm.c @@ -0,0 +1,1943 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qcom_scm.h" + +static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT); +module_param(download_mode, bool, 0); + +struct qcom_scm { + struct device *dev; + struct clk *core_clk; + struct clk *iface_clk; + struct clk *bus_clk; + struct icc_path *path; + struct completion waitq_comp; + struct reset_controller_dev reset; + + /* control access to the interconnect path */ + struct mutex scm_bw_lock; + int scm_vote_count; + + u64 dload_mode_addr; +}; + +struct qcom_scm_current_perm_info { + __le32 vmid; + __le32 perm; + __le64 ctx; + __le32 ctx_size; + __le32 unused; +}; + +struct qcom_scm_mem_map_info { + __le64 mem_addr; + __le64 mem_size; +}; + +/** + * struct qcom_scm_qseecom_resp - QSEECOM SCM call response. + * @result: Result or status of the SCM call. See &enum qcom_scm_qseecom_result. + * @resp_type: Type of the response. See &enum qcom_scm_qseecom_resp_type. + * @data: Response data. The type of this data is given in @resp_type. + */ +struct qcom_scm_qseecom_resp { + u64 result; + u64 resp_type; + u64 data; +}; + +enum qcom_scm_qseecom_result { + QSEECOM_RESULT_SUCCESS = 0, + QSEECOM_RESULT_INCOMPLETE = 1, + QSEECOM_RESULT_BLOCKED_ON_LISTENER = 2, + QSEECOM_RESULT_FAILURE = 0xFFFFFFFF, +}; + +enum qcom_scm_qseecom_resp_type { + QSEECOM_SCM_RES_APP_ID = 0xEE01, + QSEECOM_SCM_RES_QSEOS_LISTENER_ID = 0xEE02, +}; + +enum qcom_scm_qseecom_tz_owner { + QSEECOM_TZ_OWNER_SIP = 2, + QSEECOM_TZ_OWNER_TZ_APPS = 48, + QSEECOM_TZ_OWNER_QSEE_OS = 50 +}; + +enum qcom_scm_qseecom_tz_svc { + QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER = 0, + QSEECOM_TZ_SVC_APP_MGR = 1, + QSEECOM_TZ_SVC_INFO = 6, +}; + +enum qcom_scm_qseecom_tz_cmd_app { + QSEECOM_TZ_CMD_APP_SEND = 1, + QSEECOM_TZ_CMD_APP_LOOKUP = 3, +}; + +enum qcom_scm_qseecom_tz_cmd_info { + QSEECOM_TZ_CMD_INFO_VERSION = 3, +}; + +#define QSEECOM_MAX_APP_NAME_SIZE 64 + +/* Each bit configures cold/warm boot address for one of the 4 CPUs */ +static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = { + 0, BIT(0), BIT(3), BIT(5) +}; +static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = { + BIT(2), BIT(1), BIT(4), BIT(6) +}; + +#define QCOM_SMC_WAITQ_FLAG_WAKE_ONE BIT(0) +#define QCOM_SMC_WAITQ_FLAG_WAKE_ALL BIT(1) + +static const char * const qcom_scm_convention_names[] = { + [SMC_CONVENTION_UNKNOWN] = "unknown", + [SMC_CONVENTION_ARM_32] = "smc arm 32", + [SMC_CONVENTION_ARM_64] = "smc arm 64", + [SMC_CONVENTION_LEGACY] = "smc legacy", +}; + +static struct qcom_scm *__scm; + +static int qcom_scm_clk_enable(void) +{ + int ret; + + ret = clk_prepare_enable(__scm->core_clk); + if (ret) + goto bail; + + ret = clk_prepare_enable(__scm->iface_clk); + if (ret) + goto disable_core; + + ret = clk_prepare_enable(__scm->bus_clk); + if (ret) + goto disable_iface; + + return 0; + +disable_iface: + clk_disable_unprepare(__scm->iface_clk); +disable_core: + clk_disable_unprepare(__scm->core_clk); +bail: + return ret; +} + +static void qcom_scm_clk_disable(void) +{ + clk_disable_unprepare(__scm->core_clk); + clk_disable_unprepare(__scm->iface_clk); + clk_disable_unprepare(__scm->bus_clk); +} + +static int qcom_scm_bw_enable(void) +{ + int ret = 0; + + if (!__scm->path) + return 0; + + if (IS_ERR(__scm->path)) + return -EINVAL; + + mutex_lock(&__scm->scm_bw_lock); + if (!__scm->scm_vote_count) { + ret = icc_set_bw(__scm->path, 0, UINT_MAX); + if (ret < 0) { + dev_err(__scm->dev, "failed to set bandwidth request\n"); + goto err_bw; + } + } + __scm->scm_vote_count++; +err_bw: + mutex_unlock(&__scm->scm_bw_lock); + + return ret; +} + +static void qcom_scm_bw_disable(void) +{ + if (IS_ERR_OR_NULL(__scm->path)) + return; + + mutex_lock(&__scm->scm_bw_lock); + if (__scm->scm_vote_count-- == 1) + icc_set_bw(__scm->path, 0, 0); + mutex_unlock(&__scm->scm_bw_lock); +} + +enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN; +static DEFINE_SPINLOCK(scm_query_lock); + +static enum qcom_scm_convention __get_convention(void) +{ + unsigned long flags; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_INFO, + .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL, + .args[0] = SCM_SMC_FNID(QCOM_SCM_SVC_INFO, + QCOM_SCM_INFO_IS_CALL_AVAIL) | + (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT), + .arginfo = QCOM_SCM_ARGS(1), + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + enum qcom_scm_convention probed_convention; + int ret; + bool forced = false; + + if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN)) + return qcom_scm_convention; + + /* + * Per the "SMC calling convention specification", the 64-bit calling + * convention can only be used when the client is 64-bit, otherwise + * system will encounter the undefined behaviour. + */ +#if IS_ENABLED(CONFIG_ARM64) + /* + * Device isn't required as there is only one argument - no device + * needed to dma_map_single to secure world + */ + probed_convention = SMC_CONVENTION_ARM_64; + ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true); + if (!ret && res.result[0] == 1) + goto found; + + /* + * Some SC7180 firmwares didn't implement the + * QCOM_SCM_INFO_IS_CALL_AVAIL call, so we fallback to forcing ARM_64 + * calling conventions on these firmwares. Luckily we don't make any + * early calls into the firmware on these SoCs so the device pointer + * will be valid here to check if the compatible matches. + */ + if (of_device_is_compatible(__scm ? __scm->dev->of_node : NULL, "qcom,scm-sc7180")) { + forced = true; + goto found; + } +#endif + + probed_convention = SMC_CONVENTION_ARM_32; + ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true); + if (!ret && res.result[0] == 1) + goto found; + + probed_convention = SMC_CONVENTION_LEGACY; +found: + spin_lock_irqsave(&scm_query_lock, flags); + if (probed_convention != qcom_scm_convention) { + qcom_scm_convention = probed_convention; + pr_info("qcom_scm: convention: %s%s\n", + qcom_scm_convention_names[qcom_scm_convention], + forced ? " (forced)" : ""); + } + spin_unlock_irqrestore(&scm_query_lock, flags); + + return qcom_scm_convention; +} + +/** + * qcom_scm_call() - Invoke a syscall in the secure world + * @dev: device + * @desc: Descriptor structure containing arguments and return values + * @res: Structure containing results from SMC/HVC call + * + * Sends a command to the SCM and waits for the command to finish processing. + * This should *only* be called in pre-emptible context. + */ +static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc, + struct qcom_scm_res *res) +{ + might_sleep(); + switch (__get_convention()) { + case SMC_CONVENTION_ARM_32: + case SMC_CONVENTION_ARM_64: + return scm_smc_call(dev, desc, res, false); + case SMC_CONVENTION_LEGACY: + return scm_legacy_call(dev, desc, res); + default: + pr_err("Unknown current SCM calling convention.\n"); + return -EINVAL; + } +} + +/** + * qcom_scm_call_atomic() - atomic variation of qcom_scm_call() + * @dev: device + * @desc: Descriptor structure containing arguments and return values + * @res: Structure containing results from SMC/HVC call + * + * Sends a command to the SCM and waits for the command to finish processing. + * This can be called in atomic context. + */ +static int qcom_scm_call_atomic(struct device *dev, + const struct qcom_scm_desc *desc, + struct qcom_scm_res *res) +{ + switch (__get_convention()) { + case SMC_CONVENTION_ARM_32: + case SMC_CONVENTION_ARM_64: + return scm_smc_call(dev, desc, res, true); + case SMC_CONVENTION_LEGACY: + return scm_legacy_call_atomic(dev, desc, res); + default: + pr_err("Unknown current SCM calling convention.\n"); + return -EINVAL; + } +} + +static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id, + u32 cmd_id) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_INFO, + .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + desc.arginfo = QCOM_SCM_ARGS(1); + switch (__get_convention()) { + case SMC_CONVENTION_ARM_32: + case SMC_CONVENTION_ARM_64: + desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) | + (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT); + break; + case SMC_CONVENTION_LEGACY: + desc.args[0] = SCM_LEGACY_FNID(svc_id, cmd_id); + break; + default: + pr_err("Unknown SMC convention being used\n"); + return false; + } + + ret = qcom_scm_call(dev, &desc, &res); + + return ret ? false : !!res.result[0]; +} + +static int qcom_scm_set_boot_addr(void *entry, const u8 *cpu_bits) +{ + int cpu; + unsigned int flags = 0; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SET_ADDR, + .arginfo = QCOM_SCM_ARGS(2), + .owner = ARM_SMCCC_OWNER_SIP, + }; + + for_each_present_cpu(cpu) { + if (cpu >= QCOM_SCM_BOOT_MAX_CPUS) + return -EINVAL; + flags |= cpu_bits[cpu]; + } + + desc.args[0] = flags; + desc.args[1] = virt_to_phys(entry); + + return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); +} + +static int qcom_scm_set_boot_addr_mc(void *entry, unsigned int flags) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SET_ADDR_MC, + .owner = ARM_SMCCC_OWNER_SIP, + .arginfo = QCOM_SCM_ARGS(6), + .args = { + virt_to_phys(entry), + /* Apply to all CPUs in all affinity levels */ + ~0ULL, ~0ULL, ~0ULL, ~0ULL, + flags, + }, + }; + + /* Need a device for DMA of the additional arguments */ + if (!__scm || __get_convention() == SMC_CONVENTION_LEGACY) + return -EOPNOTSUPP; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} + +/** + * qcom_scm_set_warm_boot_addr() - Set the warm boot address for all cpus + * @entry: Entry point function for the cpus + * + * Set the Linux entry point for the SCM to transfer control to when coming + * out of a power down. CPU power down may be executed on cpuidle or hotplug. + */ +int qcom_scm_set_warm_boot_addr(void *entry) +{ + if (qcom_scm_set_boot_addr_mc(entry, QCOM_SCM_BOOT_MC_FLAG_WARMBOOT)) + /* Fallback to old SCM call */ + return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_warm_bits); + return 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_set_warm_boot_addr); + +/** + * qcom_scm_set_cold_boot_addr() - Set the cold boot address for all cpus + * @entry: Entry point function for the cpus + */ +int qcom_scm_set_cold_boot_addr(void *entry) +{ + if (qcom_scm_set_boot_addr_mc(entry, QCOM_SCM_BOOT_MC_FLAG_COLDBOOT)) + /* Fallback to old SCM call */ + return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_cold_bits); + return 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_set_cold_boot_addr); + +/** + * qcom_scm_cpu_power_down() - Power down the cpu + * @flags: Flags to flush cache + * + * This is an end point to power down cpu. If there was a pending interrupt, + * the control would return from this function, otherwise, the cpu jumps to the + * warm boot entry point set for this cpu upon reset. + */ +void qcom_scm_cpu_power_down(u32 flags) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_TERMINATE_PC, + .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK, + .arginfo = QCOM_SCM_ARGS(1), + .owner = ARM_SMCCC_OWNER_SIP, + }; + + qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_cpu_power_down); + +int qcom_scm_set_remote_state(u32 state, u32 id) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = state, + .args[1] = id, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); + +static int qcom_scm_disable_sdi(void) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SDI_CONFIG, + .args[0] = 1, /* Disable watchdog debug */ + .args[1] = 0, /* Disable SDI */ + .arginfo = QCOM_SCM_ARGS(2), + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + ret = qcom_scm_call(__scm->dev, &desc, &res); + + qcom_scm_clk_disable(); + + return ret ? : res.result[0]; +} + +static int __qcom_scm_set_dload_mode(struct device *dev, bool enable) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_BOOT, + .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0; + + return qcom_scm_call_atomic(__scm->dev, &desc, NULL); +} + +static void qcom_scm_set_download_mode(bool enable) +{ + bool avail; + int ret = 0; + + avail = __qcom_scm_is_call_available(__scm->dev, + QCOM_SCM_SVC_BOOT, + QCOM_SCM_BOOT_SET_DLOAD_MODE); + if (avail) { + ret = __qcom_scm_set_dload_mode(__scm->dev, enable); + } else if (__scm->dload_mode_addr) { + ret = qcom_scm_io_writel(__scm->dload_mode_addr, + enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0); + } else { + dev_err(__scm->dev, + "No available mechanism for setting download mode\n"); + } + + if (ret) + dev_err(__scm->dev, "failed to set download mode: %d\n", ret); +} + +/** + * qcom_scm_pas_init_image() - Initialize peripheral authentication service + * state machine for a given peripheral, using the + * metadata + * @peripheral: peripheral id + * @metadata: pointer to memory containing ELF header, program header table + * and optional blob of data used for authenticating the metadata + * and the rest of the firmware + * @size: size of the metadata + * @ctx: optional metadata context + * + * Return: 0 on success. + * + * Upon successful return, the PAS metadata context (@ctx) will be used to + * track the metadata allocation, this needs to be released by invoking + * qcom_scm_pas_metadata_release() by the caller. + */ +int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size, + struct qcom_scm_pas_metadata *ctx) +{ + dma_addr_t mdata_phys; + void *mdata_buf; + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_PIL, + .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE, + .arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW), + .args[0] = peripheral, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + /* + * During the scm call memory protection will be enabled for the meta + * data blob, so make sure it's physically contiguous, 4K aligned and + * non-cachable to avoid XPU violations. + */ + mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys, + GFP_KERNEL); + if (!mdata_buf) { + dev_err(__scm->dev, "Allocation of metadata buffer failed.\n"); + return -ENOMEM; + } + memcpy(mdata_buf, metadata, size); + + ret = qcom_scm_clk_enable(); + if (ret) + goto out; + + ret = qcom_scm_bw_enable(); + if (ret) + return ret; + + desc.args[1] = mdata_phys; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + qcom_scm_bw_disable(); + qcom_scm_clk_disable(); + +out: + if (ret < 0 || !ctx) { + dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys); + } else if (ctx) { + ctx->ptr = mdata_buf; + ctx->phys = mdata_phys; + ctx->size = size; + } + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image); + +/** + * qcom_scm_pas_metadata_release() - release metadata context + * @ctx: metadata context + */ +void qcom_scm_pas_metadata_release(struct qcom_scm_pas_metadata *ctx) +{ + if (!ctx->ptr) + return; + + dma_free_coherent(__scm->dev, ctx->size, ctx->ptr, ctx->phys); + + ctx->ptr = NULL; + ctx->phys = 0; + ctx->size = 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release); + +/** + * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral + * for firmware loading + * @peripheral: peripheral id + * @addr: start address of memory area to prepare + * @size: size of the memory area to prepare + * + * Returns 0 on success. + */ +int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_PIL, + .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP, + .arginfo = QCOM_SCM_ARGS(3), + .args[0] = peripheral, + .args[1] = addr, + .args[2] = size, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = qcom_scm_bw_enable(); + if (ret) + return ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + qcom_scm_bw_disable(); + qcom_scm_clk_disable(); + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup); + +/** + * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware + * and reset the remote processor + * @peripheral: peripheral id + * + * Return 0 on success. + */ +int qcom_scm_pas_auth_and_reset(u32 peripheral) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_PIL, + .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET, + .arginfo = QCOM_SCM_ARGS(1), + .args[0] = peripheral, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = qcom_scm_bw_enable(); + if (ret) + return ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + qcom_scm_bw_disable(); + qcom_scm_clk_disable(); + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset); + +/** + * qcom_scm_pas_shutdown() - Shut down the remote processor + * @peripheral: peripheral id + * + * Returns 0 on success. + */ +int qcom_scm_pas_shutdown(u32 peripheral) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_PIL, + .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN, + .arginfo = QCOM_SCM_ARGS(1), + .args[0] = peripheral, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = qcom_scm_bw_enable(); + if (ret) + return ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + qcom_scm_bw_disable(); + qcom_scm_clk_disable(); + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown); + +/** + * qcom_scm_pas_supported() - Check if the peripheral authentication service is + * available for the given peripherial + * @peripheral: peripheral id + * + * Returns true if PAS is supported for this peripheral, otherwise false. + */ +bool qcom_scm_pas_supported(u32 peripheral) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_PIL, + .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED, + .arginfo = QCOM_SCM_ARGS(1), + .args[0] = peripheral, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, + QCOM_SCM_PIL_PAS_IS_SUPPORTED)) + return false; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + return ret ? false : !!res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_pas_supported); + +static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_PIL, + .cmd = QCOM_SCM_PIL_PAS_MSS_RESET, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = reset, + .args[1] = 0, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + return ret ? : res.result[0]; +} + +static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + if (idx != 0) + return -EINVAL; + + return __qcom_scm_pas_mss_reset(__scm->dev, 1); +} + +static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + if (idx != 0) + return -EINVAL; + + return __qcom_scm_pas_mss_reset(__scm->dev, 0); +} + +static const struct reset_control_ops qcom_scm_pas_reset_ops = { + .assert = qcom_scm_pas_reset_assert, + .deassert = qcom_scm_pas_reset_deassert, +}; + +int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_IO, + .cmd = QCOM_SCM_IO_READ, + .arginfo = QCOM_SCM_ARGS(1), + .args[0] = addr, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + + ret = qcom_scm_call_atomic(__scm->dev, &desc, &res); + if (ret >= 0) + *val = res.result[0]; + + return ret < 0 ? ret : 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_io_readl); + +int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_IO, + .cmd = QCOM_SCM_IO_WRITE, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = addr, + .args[1] = val, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + return qcom_scm_call_atomic(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_io_writel); + +/** + * qcom_scm_restore_sec_cfg_available() - Check if secure environment + * supports restore security config interface. + * + * Return true if restore-cfg interface is supported, false if not. + */ +bool qcom_scm_restore_sec_cfg_available(void) +{ + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP, + QCOM_SCM_MP_RESTORE_SEC_CFG); +} +EXPORT_SYMBOL_GPL(qcom_scm_restore_sec_cfg_available); + +int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_MP, + .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = device_id, + .args[1] = spare, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_restore_sec_cfg); + +int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_MP, + .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, + .arginfo = QCOM_SCM_ARGS(1), + .args[0] = spare, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + int ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + if (size) + *size = res.result[0]; + + return ret ? : res.result[1]; +} +EXPORT_SYMBOL_GPL(qcom_scm_iommu_secure_ptbl_size); + +int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_MP, + .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, + .arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL, + QCOM_SCM_VAL), + .args[0] = addr, + .args[1] = size, + .args[2] = spare, + .owner = ARM_SMCCC_OWNER_SIP, + }; + int ret; + + ret = qcom_scm_call(__scm->dev, &desc, NULL); + + /* the pg table has been initialized already, ignore the error */ + if (ret == -EPERM) + ret = 0; + + return ret; +} +EXPORT_SYMBOL_GPL(qcom_scm_iommu_secure_ptbl_init); + +int qcom_scm_iommu_set_cp_pool_size(u32 spare, u32 size) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_MP, + .cmd = QCOM_SCM_MP_IOMMU_SET_CP_POOL_SIZE, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = size, + .args[1] = spare, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_iommu_set_cp_pool_size); + +int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size, + u32 cp_nonpixel_start, + u32 cp_nonpixel_size) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_MP, + .cmd = QCOM_SCM_MP_VIDEO_VAR, + .arginfo = QCOM_SCM_ARGS(4, QCOM_SCM_VAL, QCOM_SCM_VAL, + QCOM_SCM_VAL, QCOM_SCM_VAL), + .args[0] = cp_start, + .args[1] = cp_size, + .args[2] = cp_nonpixel_start, + .args[3] = cp_nonpixel_size, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + + return ret ? : res.result[0]; +} +EXPORT_SYMBOL_GPL(qcom_scm_mem_protect_video_var); + +static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region, + size_t mem_sz, phys_addr_t src, size_t src_sz, + phys_addr_t dest, size_t dest_sz) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_MP, + .cmd = QCOM_SCM_MP_ASSIGN, + .arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL, + QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO, + QCOM_SCM_VAL, QCOM_SCM_VAL), + .args[0] = mem_region, + .args[1] = mem_sz, + .args[2] = src, + .args[3] = src_sz, + .args[4] = dest, + .args[5] = dest_sz, + .args[6] = 0, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + ret = qcom_scm_call(dev, &desc, &res); + + return ret ? : res.result[0]; +} + +/** + * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership + * @mem_addr: mem region whose ownership need to be reassigned + * @mem_sz: size of the region. + * @srcvm: vmid for current set of owners, each set bit in + * flag indicate a unique owner + * @newvm: array having new owners and corresponding permission + * flags + * @dest_cnt: number of owners in next set. + * + * Return negative errno on failure or 0 on success with @srcvm updated. + */ +int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, + u64 *srcvm, + const struct qcom_scm_vmperm *newvm, + unsigned int dest_cnt) +{ + struct qcom_scm_current_perm_info *destvm; + struct qcom_scm_mem_map_info *mem_to_map; + phys_addr_t mem_to_map_phys; + phys_addr_t dest_phys; + dma_addr_t ptr_phys; + size_t mem_to_map_sz; + size_t dest_sz; + size_t src_sz; + size_t ptr_sz; + int next_vm; + __le32 *src; + void *ptr; + int ret, i, b; + u64 srcvm_bits = *srcvm; + + src_sz = hweight64(srcvm_bits) * sizeof(*src); + mem_to_map_sz = sizeof(*mem_to_map); + dest_sz = dest_cnt * sizeof(*destvm); + ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) + + ALIGN(dest_sz, SZ_64); + + ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + /* Fill source vmid detail */ + src = ptr; + i = 0; + for (b = 0; b < BITS_PER_TYPE(u64); b++) { + if (srcvm_bits & BIT(b)) + src[i++] = cpu_to_le32(b); + } + + /* Fill details of mem buff to map */ + mem_to_map = ptr + ALIGN(src_sz, SZ_64); + mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64); + mem_to_map->mem_addr = cpu_to_le64(mem_addr); + mem_to_map->mem_size = cpu_to_le64(mem_sz); + + next_vm = 0; + /* Fill details of next vmid detail */ + destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64); + dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64); + for (i = 0; i < dest_cnt; i++, destvm++, newvm++) { + destvm->vmid = cpu_to_le32(newvm->vmid); + destvm->perm = cpu_to_le32(newvm->perm); + destvm->ctx = 0; + destvm->ctx_size = 0; + next_vm |= BIT(newvm->vmid); + } + + ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz, + ptr_phys, src_sz, dest_phys, dest_sz); + dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_phys); + if (ret) { + dev_err(__scm->dev, + "Assign memory protection call failed %d\n", ret); + return -EINVAL; + } + + *srcvm = next_vm; + return 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_assign_mem); + +/** + * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available + */ +bool qcom_scm_ocmem_lock_available(void) +{ + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_OCMEM, + QCOM_SCM_OCMEM_LOCK_CMD); +} +EXPORT_SYMBOL_GPL(qcom_scm_ocmem_lock_available); + +/** + * qcom_scm_ocmem_lock() - call OCMEM lock interface to assign an OCMEM + * region to the specified initiator + * + * @id: tz initiator id + * @offset: OCMEM offset + * @size: OCMEM size + * @mode: access mode (WIDE/NARROW) + */ +int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size, + u32 mode) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_OCMEM, + .cmd = QCOM_SCM_OCMEM_LOCK_CMD, + .args[0] = id, + .args[1] = offset, + .args[2] = size, + .args[3] = mode, + .arginfo = QCOM_SCM_ARGS(4), + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_ocmem_lock); + +/** + * qcom_scm_ocmem_unlock() - call OCMEM unlock interface to release an OCMEM + * region from the specified initiator + * + * @id: tz initiator id + * @offset: OCMEM offset + * @size: OCMEM size + */ +int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_OCMEM, + .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD, + .args[0] = id, + .args[1] = offset, + .args[2] = size, + .arginfo = QCOM_SCM_ARGS(3), + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_ocmem_unlock); + +/** + * qcom_scm_ice_available() - Is the ICE key programming interface available? + * + * Return: true iff the SCM calls wrapped by qcom_scm_ice_invalidate_key() and + * qcom_scm_ice_set_key() are available. + */ +bool qcom_scm_ice_available(void) +{ + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES, + QCOM_SCM_ES_INVALIDATE_ICE_KEY) && + __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES, + QCOM_SCM_ES_CONFIG_SET_ICE_KEY); +} +EXPORT_SYMBOL_GPL(qcom_scm_ice_available); + +/** + * qcom_scm_ice_invalidate_key() - Invalidate an inline encryption key + * @index: the keyslot to invalidate + * + * The UFSHCI and eMMC standards define a standard way to do this, but it + * doesn't work on these SoCs; only this SCM call does. + * + * It is assumed that the SoC has only one ICE instance being used, as this SCM + * call doesn't specify which ICE instance the keyslot belongs to. + * + * Return: 0 on success; -errno on failure. + */ +int qcom_scm_ice_invalidate_key(u32 index) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_ES, + .cmd = QCOM_SCM_ES_INVALIDATE_ICE_KEY, + .arginfo = QCOM_SCM_ARGS(1), + .args[0] = index, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_ice_invalidate_key); + +/** + * qcom_scm_ice_set_key() - Set an inline encryption key + * @index: the keyslot into which to set the key + * @key: the key to program + * @key_size: the size of the key in bytes + * @cipher: the encryption algorithm the key is for + * @data_unit_size: the encryption data unit size, i.e. the size of each + * individual plaintext and ciphertext. Given in 512-byte + * units, e.g. 1 = 512 bytes, 8 = 4096 bytes, etc. + * + * Program a key into a keyslot of Qualcomm ICE (Inline Crypto Engine), where it + * can then be used to encrypt/decrypt UFS or eMMC I/O requests inline. + * + * The UFSHCI and eMMC standards define a standard way to do this, but it + * doesn't work on these SoCs; only this SCM call does. + * + * It is assumed that the SoC has only one ICE instance being used, as this SCM + * call doesn't specify which ICE instance the keyslot belongs to. + * + * Return: 0 on success; -errno on failure. + */ +int qcom_scm_ice_set_key(u32 index, const u8 *key, u32 key_size, + enum qcom_scm_ice_cipher cipher, u32 data_unit_size) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_ES, + .cmd = QCOM_SCM_ES_CONFIG_SET_ICE_KEY, + .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL, QCOM_SCM_RW, + QCOM_SCM_VAL, QCOM_SCM_VAL, + QCOM_SCM_VAL), + .args[0] = index, + .args[2] = key_size, + .args[3] = cipher, + .args[4] = data_unit_size, + .owner = ARM_SMCCC_OWNER_SIP, + }; + void *keybuf; + dma_addr_t key_phys; + int ret; + + /* + * 'key' may point to vmalloc()'ed memory, but we need to pass a + * physical address that's been properly flushed. The sanctioned way to + * do this is by using the DMA API. But as is best practice for crypto + * keys, we also must wipe the key after use. This makes kmemdup() + + * dma_map_single() not clearly correct, since the DMA API can use + * bounce buffers. Instead, just use dma_alloc_coherent(). Programming + * keys is normally rare and thus not performance-critical. + */ + + keybuf = dma_alloc_coherent(__scm->dev, key_size, &key_phys, + GFP_KERNEL); + if (!keybuf) + return -ENOMEM; + memcpy(keybuf, key, key_size); + desc.args[1] = key_phys; + + ret = qcom_scm_call(__scm->dev, &desc, NULL); + + memzero_explicit(keybuf, key_size); + + dma_free_coherent(__scm->dev, key_size, keybuf, key_phys); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_scm_ice_set_key); + +/** + * qcom_scm_hdcp_available() - Check if secure environment supports HDCP. + * + * Return true if HDCP is supported, false if not. + */ +bool qcom_scm_hdcp_available(void) +{ + bool avail; + int ret = qcom_scm_clk_enable(); + + if (ret) + return ret; + + avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP, + QCOM_SCM_HDCP_INVOKE); + + qcom_scm_clk_disable(); + + return avail; +} +EXPORT_SYMBOL_GPL(qcom_scm_hdcp_available); + +/** + * qcom_scm_hdcp_req() - Send HDCP request. + * @req: HDCP request array + * @req_cnt: HDCP request array count + * @resp: response buffer passed to SCM + * + * Write HDCP register(s) through SCM. + */ +int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +{ + int ret; + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_HDCP, + .cmd = QCOM_SCM_HDCP_INVOKE, + .arginfo = QCOM_SCM_ARGS(10), + .args = { + req[0].addr, + req[0].val, + req[1].addr, + req[1].val, + req[2].addr, + req[2].val, + req[3].addr, + req[3].val, + req[4].addr, + req[4].val + }, + .owner = ARM_SMCCC_OWNER_SIP, + }; + struct qcom_scm_res res; + + if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) + return -ERANGE; + + ret = qcom_scm_clk_enable(); + if (ret) + return ret; + + ret = qcom_scm_call(__scm->dev, &desc, &res); + *resp = res.result[0]; + + qcom_scm_clk_disable(); + + return ret; +} +EXPORT_SYMBOL_GPL(qcom_scm_hdcp_req); + +int qcom_scm_iommu_set_pt_format(u32 sec_id, u32 ctx_num, u32 pt_fmt) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_SMMU_PROGRAM, + .cmd = QCOM_SCM_SMMU_PT_FORMAT, + .arginfo = QCOM_SCM_ARGS(3), + .args[0] = sec_id, + .args[1] = ctx_num, + .args[2] = pt_fmt, /* 0: LPAE AArch32 - 1: AArch64 */ + .owner = ARM_SMCCC_OWNER_SIP, + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_iommu_set_pt_format); + +int qcom_scm_qsmmu500_wait_safe_toggle(bool en) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_SMMU_PROGRAM, + .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1, + .arginfo = QCOM_SCM_ARGS(2), + .args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL, + .args[1] = en, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + + return qcom_scm_call_atomic(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_qsmmu500_wait_safe_toggle); + +bool qcom_scm_lmh_dcvsh_available(void) +{ + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH); +} +EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available); + +int qcom_scm_lmh_profile_change(u32 profile_id) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_LMH, + .cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE, + .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL), + .args[0] = profile_id, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL_GPL(qcom_scm_lmh_profile_change); + +int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, + u64 limit_node, u32 node_id, u64 version) +{ + dma_addr_t payload_phys; + u32 *payload_buf; + int ret, payload_size = 5 * sizeof(u32); + + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_LMH, + .cmd = QCOM_SCM_LMH_LIMIT_DCVSH, + .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL, + QCOM_SCM_VAL, QCOM_SCM_VAL), + .args[1] = payload_size, + .args[2] = limit_node, + .args[3] = node_id, + .args[4] = version, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL); + if (!payload_buf) + return -ENOMEM; + + payload_buf[0] = payload_fn; + payload_buf[1] = 0; + payload_buf[2] = payload_reg; + payload_buf[3] = 1; + payload_buf[4] = payload_val; + + desc.args[0] = payload_phys; + + ret = qcom_scm_call(__scm->dev, &desc, NULL); + + dma_free_coherent(__scm->dev, payload_size, payload_buf, payload_phys); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh); + +static int qcom_scm_find_dload_address(struct device *dev, u64 *addr) +{ + struct device_node *tcsr; + struct device_node *np = dev->of_node; + struct resource res; + u32 offset; + int ret; + + tcsr = of_parse_phandle(np, "qcom,dload-mode", 0); + if (!tcsr) + return 0; + + ret = of_address_to_resource(tcsr, 0, &res); + of_node_put(tcsr); + if (ret) + return ret; + + ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset); + if (ret < 0) + return ret; + + *addr = res.start + offset; + + return 0; +} + +#ifdef CONFIG_QCOM_QSEECOM + +/* Lock for QSEECOM SCM call executions */ +static DEFINE_MUTEX(qcom_scm_qseecom_call_lock); + +static int __qcom_scm_qseecom_call(const struct qcom_scm_desc *desc, + struct qcom_scm_qseecom_resp *res) +{ + struct qcom_scm_res scm_res = {}; + int status; + + /* + * QSEECOM SCM calls should not be executed concurrently. Therefore, we + * require the respective call lock to be held. + */ + lockdep_assert_held(&qcom_scm_qseecom_call_lock); + + status = qcom_scm_call(__scm->dev, desc, &scm_res); + + res->result = scm_res.result[0]; + res->resp_type = scm_res.result[1]; + res->data = scm_res.result[2]; + + if (status) + return status; + + return 0; +} + +/** + * qcom_scm_qseecom_call() - Perform a QSEECOM SCM call. + * @desc: SCM call descriptor. + * @res: SCM call response (output). + * + * Performs the QSEECOM SCM call described by @desc, returning the response in + * @rsp. + * + * Return: Zero on success, nonzero on failure. + */ +static int qcom_scm_qseecom_call(const struct qcom_scm_desc *desc, + struct qcom_scm_qseecom_resp *res) +{ + int status; + + /* + * Note: Multiple QSEECOM SCM calls should not be executed same time, + * so lock things here. This needs to be extended to callback/listener + * handling when support for that is implemented. + */ + + mutex_lock(&qcom_scm_qseecom_call_lock); + status = __qcom_scm_qseecom_call(desc, res); + mutex_unlock(&qcom_scm_qseecom_call_lock); + + dev_dbg(__scm->dev, "%s: owner=%x, svc=%x, cmd=%x, result=%lld, type=%llx, data=%llx\n", + __func__, desc->owner, desc->svc, desc->cmd, res->result, + res->resp_type, res->data); + + if (status) { + dev_err(__scm->dev, "qseecom: scm call failed with error %d\n", status); + return status; + } + + /* + * TODO: Handle incomplete and blocked calls: + * + * Incomplete and blocked calls are not supported yet. Some devices + * and/or commands require those, some don't. Let's warn about them + * prominently in case someone attempts to try these commands with a + * device/command combination that isn't supported yet. + */ + WARN_ON(res->result == QSEECOM_RESULT_INCOMPLETE); + WARN_ON(res->result == QSEECOM_RESULT_BLOCKED_ON_LISTENER); + + return 0; +} + +/** + * qcom_scm_qseecom_get_version() - Query the QSEECOM version. + * @version: Pointer where the QSEECOM version will be stored. + * + * Performs the QSEECOM SCM querying the QSEECOM version currently running in + * the TrustZone. + * + * Return: Zero on success, nonzero on failure. + */ +static int qcom_scm_qseecom_get_version(u32 *version) +{ + struct qcom_scm_desc desc = {}; + struct qcom_scm_qseecom_resp res = {}; + u32 feature = 10; + int ret; + + desc.owner = QSEECOM_TZ_OWNER_SIP; + desc.svc = QSEECOM_TZ_SVC_INFO; + desc.cmd = QSEECOM_TZ_CMD_INFO_VERSION; + desc.arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL); + desc.args[0] = feature; + + ret = qcom_scm_qseecom_call(&desc, &res); + if (ret) + return ret; + + *version = res.result; + return 0; +} + +/** + * qcom_scm_qseecom_app_get_id() - Query the app ID for a given QSEE app name. + * @app_name: The name of the app. + * @app_id: The returned app ID. + * + * Query and return the application ID of the SEE app identified by the given + * name. This returned ID is the unique identifier of the app required for + * subsequent communication. + * + * Return: Zero on success, nonzero on failure, -ENOENT if the app has not been + * loaded or could not be found. + */ +int qcom_scm_qseecom_app_get_id(const char *app_name, u32 *app_id) +{ + unsigned long name_buf_size = QSEECOM_MAX_APP_NAME_SIZE; + unsigned long app_name_len = strlen(app_name); + struct qcom_scm_desc desc = {}; + struct qcom_scm_qseecom_resp res = {}; + dma_addr_t name_buf_phys; + char *name_buf; + int status; + + if (app_name_len >= name_buf_size) + return -EINVAL; + + name_buf = kzalloc(name_buf_size, GFP_KERNEL); + if (!name_buf) + return -ENOMEM; + + memcpy(name_buf, app_name, app_name_len); + + name_buf_phys = dma_map_single(__scm->dev, name_buf, name_buf_size, DMA_TO_DEVICE); + status = dma_mapping_error(__scm->dev, name_buf_phys); + if (status) { + kfree(name_buf); + dev_err(__scm->dev, "qseecom: failed to map dma address\n"); + return status; + } + + desc.owner = QSEECOM_TZ_OWNER_QSEE_OS; + desc.svc = QSEECOM_TZ_SVC_APP_MGR; + desc.cmd = QSEECOM_TZ_CMD_APP_LOOKUP; + desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_RW, QCOM_SCM_VAL); + desc.args[0] = name_buf_phys; + desc.args[1] = app_name_len; + + status = qcom_scm_qseecom_call(&desc, &res); + dma_unmap_single(__scm->dev, name_buf_phys, name_buf_size, DMA_TO_DEVICE); + kfree(name_buf); + + if (status) + return status; + + if (res.result == QSEECOM_RESULT_FAILURE) + return -ENOENT; + + if (res.result != QSEECOM_RESULT_SUCCESS) + return -EINVAL; + + if (res.resp_type != QSEECOM_SCM_RES_APP_ID) + return -EINVAL; + + *app_id = res.data; + return 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_get_id); + +/** + * qcom_scm_qseecom_app_send() - Send to and receive data from a given QSEE app. + * @app_id: The ID of the target app. + * @req: Request buffer sent to the app (must be DMA-mappable). + * @req_size: Size of the request buffer. + * @rsp: Response buffer, written to by the app (must be DMA-mappable). + * @rsp_size: Size of the response buffer. + * + * Sends a request to the QSEE app associated with the given ID and read back + * its response. The caller must provide two DMA memory regions, one for the + * request and one for the response, and fill out the @req region with the + * respective (app-specific) request data. The QSEE app reads this and returns + * its response in the @rsp region. + * + * Return: Zero on success, nonzero on failure. + */ +int qcom_scm_qseecom_app_send(u32 app_id, void *req, size_t req_size, void *rsp, + size_t rsp_size) +{ + struct qcom_scm_qseecom_resp res = {}; + struct qcom_scm_desc desc = {}; + dma_addr_t req_phys; + dma_addr_t rsp_phys; + int status; + + /* Map request buffer */ + req_phys = dma_map_single(__scm->dev, req, req_size, DMA_TO_DEVICE); + status = dma_mapping_error(__scm->dev, req_phys); + if (status) { + dev_err(__scm->dev, "qseecom: failed to map request buffer\n"); + return status; + } + + /* Map response buffer */ + rsp_phys = dma_map_single(__scm->dev, rsp, rsp_size, DMA_FROM_DEVICE); + status = dma_mapping_error(__scm->dev, rsp_phys); + if (status) { + dma_unmap_single(__scm->dev, req_phys, req_size, DMA_TO_DEVICE); + dev_err(__scm->dev, "qseecom: failed to map response buffer\n"); + return status; + } + + /* Set up SCM call data */ + desc.owner = QSEECOM_TZ_OWNER_TZ_APPS; + desc.svc = QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER; + desc.cmd = QSEECOM_TZ_CMD_APP_SEND; + desc.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL, + QCOM_SCM_RW, QCOM_SCM_VAL, + QCOM_SCM_RW, QCOM_SCM_VAL); + desc.args[0] = app_id; + desc.args[1] = req_phys; + desc.args[2] = req_size; + desc.args[3] = rsp_phys; + desc.args[4] = rsp_size; + + /* Perform call */ + status = qcom_scm_qseecom_call(&desc, &res); + + /* Unmap buffers */ + dma_unmap_single(__scm->dev, rsp_phys, rsp_size, DMA_FROM_DEVICE); + dma_unmap_single(__scm->dev, req_phys, req_size, DMA_TO_DEVICE); + + if (status) + return status; + + if (res.result != QSEECOM_RESULT_SUCCESS) + return -EIO; + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); + +/* + * We do not yet support re-entrant calls via the qseecom interface. To prevent + + any potential issues with this, only allow validated machines for now. + */ +static const struct of_device_id qcom_scm_qseecom_allowlist[] = { + { .compatible = "lenovo,thinkpad-x13s", }, + { } +}; + +static bool qcom_scm_qseecom_machine_is_allowed(void) +{ + struct device_node *np; + bool match; + + np = of_find_node_by_path("/"); + if (!np) + return false; + + match = of_match_node(qcom_scm_qseecom_allowlist, np); + of_node_put(np); + + return match; +} + +static void qcom_scm_qseecom_free(void *data) +{ + struct platform_device *qseecom_dev = data; + + platform_device_del(qseecom_dev); + platform_device_put(qseecom_dev); +} + +static int qcom_scm_qseecom_init(struct qcom_scm *scm) +{ + struct platform_device *qseecom_dev; + u32 version; + int ret; + + /* + * Note: We do two steps of validation here: First, we try to query the + * QSEECOM version as a check to see if the interface exists on this + * device. Second, we check against known good devices due to current + * driver limitations (see comment in qcom_scm_qseecom_allowlist). + * + * Note that we deliberately do the machine check after the version + * check so that we can log potentially supported devices. This should + * be safe as downstream sources indicate that the version query is + * neither blocking nor reentrant. + */ + ret = qcom_scm_qseecom_get_version(&version); + if (ret) + return 0; + + dev_info(scm->dev, "qseecom: found qseecom with version 0x%x\n", version); + + if (!qcom_scm_qseecom_machine_is_allowed()) { + dev_info(scm->dev, "qseecom: untested machine, skipping\n"); + return 0; + } + + /* + * Set up QSEECOM interface device. All application clients will be + * set up and managed by the corresponding driver for it. + */ + qseecom_dev = platform_device_alloc("qcom_qseecom", -1); + if (!qseecom_dev) + return -ENOMEM; + + qseecom_dev->dev.parent = scm->dev; + + ret = platform_device_add(qseecom_dev); + if (ret) { + platform_device_put(qseecom_dev); + return ret; + } + + return devm_add_action_or_reset(scm->dev, qcom_scm_qseecom_free, qseecom_dev); +} + +#else /* CONFIG_QCOM_QSEECOM */ + +static int qcom_scm_qseecom_init(struct qcom_scm *scm) +{ + return 0; +} + +#endif /* CONFIG_QCOM_QSEECOM */ + +/** + * qcom_scm_is_available() - Checks if SCM is available + */ +bool qcom_scm_is_available(void) +{ + return !!__scm; +} +EXPORT_SYMBOL_GPL(qcom_scm_is_available); + +static int qcom_scm_assert_valid_wq_ctx(u32 wq_ctx) +{ + /* FW currently only supports a single wq_ctx (zero). + * TODO: Update this logic to include dynamic allocation and lookup of + * completion structs when FW supports more wq_ctx values. + */ + if (wq_ctx != 0) { + dev_err(__scm->dev, "Firmware unexpectedly passed non-zero wq_ctx\n"); + return -EINVAL; + } + + return 0; +} + +int qcom_scm_wait_for_wq_completion(u32 wq_ctx) +{ + int ret; + + ret = qcom_scm_assert_valid_wq_ctx(wq_ctx); + if (ret) + return ret; + + wait_for_completion(&__scm->waitq_comp); + + return 0; +} + +static int qcom_scm_waitq_wakeup(struct qcom_scm *scm, unsigned int wq_ctx) +{ + int ret; + + ret = qcom_scm_assert_valid_wq_ctx(wq_ctx); + if (ret) + return ret; + + complete(&__scm->waitq_comp); + + return 0; +} + +static irqreturn_t qcom_scm_irq_handler(int irq, void *data) +{ + int ret; + struct qcom_scm *scm = data; + u32 wq_ctx, flags, more_pending = 0; + + do { + ret = scm_get_wq_ctx(&wq_ctx, &flags, &more_pending); + if (ret) { + dev_err(scm->dev, "GET_WQ_CTX SMC call failed: %d\n", ret); + goto out; + } + + if (flags != QCOM_SMC_WAITQ_FLAG_WAKE_ONE && + flags != QCOM_SMC_WAITQ_FLAG_WAKE_ALL) { + dev_err(scm->dev, "Invalid flags found for wq_ctx: %u\n", flags); + goto out; + } + + ret = qcom_scm_waitq_wakeup(scm, wq_ctx); + if (ret) + goto out; + } while (more_pending); + +out: + return IRQ_HANDLED; +} + +static int qcom_scm_probe(struct platform_device *pdev) +{ + struct qcom_scm *scm; + int irq, ret; + + scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL); + if (!scm) + return -ENOMEM; + + ret = qcom_scm_find_dload_address(&pdev->dev, &scm->dload_mode_addr); + if (ret < 0) + return ret; + + mutex_init(&scm->scm_bw_lock); + + scm->path = devm_of_icc_get(&pdev->dev, NULL); + if (IS_ERR(scm->path)) + return dev_err_probe(&pdev->dev, PTR_ERR(scm->path), + "failed to acquire interconnect path\n"); + + scm->core_clk = devm_clk_get_optional(&pdev->dev, "core"); + if (IS_ERR(scm->core_clk)) + return PTR_ERR(scm->core_clk); + + scm->iface_clk = devm_clk_get_optional(&pdev->dev, "iface"); + if (IS_ERR(scm->iface_clk)) + return PTR_ERR(scm->iface_clk); + + scm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus"); + if (IS_ERR(scm->bus_clk)) + return PTR_ERR(scm->bus_clk); + + scm->reset.ops = &qcom_scm_pas_reset_ops; + scm->reset.nr_resets = 1; + scm->reset.of_node = pdev->dev.of_node; + ret = devm_reset_controller_register(&pdev->dev, &scm->reset); + if (ret) + return ret; + + /* vote for max clk rate for highest performance */ + ret = clk_set_rate(scm->core_clk, INT_MAX); + if (ret) + return ret; + + __scm = scm; + __scm->dev = &pdev->dev; + + init_completion(&__scm->waitq_comp); + + irq = platform_get_irq_optional(pdev, 0); + if (irq < 0) { + if (irq != -ENXIO) + return irq; + } else { + ret = devm_request_threaded_irq(__scm->dev, irq, NULL, qcom_scm_irq_handler, + IRQF_ONESHOT, "qcom-scm", __scm); + if (ret < 0) + return dev_err_probe(scm->dev, ret, "Failed to request qcom-scm irq\n"); + } + + __get_convention(); + + /* + * If requested enable "download mode", from this point on warmboot + * will cause the boot stages to enter download mode, unless + * disabled below by a clean shutdown/reboot. + */ + if (download_mode) + qcom_scm_set_download_mode(true); + + + /* + * Disable SDI if indicated by DT that it is enabled by default. + */ + if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled")) + qcom_scm_disable_sdi(); + + /* + * Initialize the QSEECOM interface. + * + * Note: QSEECOM is fairly self-contained and this only adds the + * interface device (the driver of which does most of the heavy + * lifting). So any errors returned here should be either -ENOMEM or + * -EINVAL (with the latter only in case there's a bug in our code). + * This means that there is no need to bring down the whole SCM driver. + * Just log the error instead and let SCM live. + */ + ret = qcom_scm_qseecom_init(scm); + WARN(ret < 0, "failed to initialize qseecom: %d\n", ret); + + return 0; +} + +static void qcom_scm_shutdown(struct platform_device *pdev) +{ + /* Clean shutdown, disable download mode to allow normal restart */ + qcom_scm_set_download_mode(false); +} + +static const struct of_device_id qcom_scm_dt_match[] = { + { .compatible = "qcom,scm" }, + + /* Legacy entries kept for backwards compatibility */ + { .compatible = "qcom,scm-apq8064" }, + { .compatible = "qcom,scm-apq8084" }, + { .compatible = "qcom,scm-ipq4019" }, + { .compatible = "qcom,scm-msm8953" }, + { .compatible = "qcom,scm-msm8974" }, + { .compatible = "qcom,scm-msm8996" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); + +static struct platform_driver qcom_scm_driver = { + .driver = { + .name = "qcom_scm", + .of_match_table = qcom_scm_dt_match, + .suppress_bind_attrs = true, + }, + .probe = qcom_scm_probe, + .shutdown = qcom_scm_shutdown, +}; + +static int __init qcom_scm_init(void) +{ + return platform_driver_register(&qcom_scm_driver); +} +subsys_initcall(qcom_scm_init); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3