From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/gpio/gpio-pcf857x.c | 442 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 442 insertions(+) create mode 100644 drivers/gpio/gpio-pcf857x.c (limited to 'drivers/gpio/gpio-pcf857x.c') diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c new file mode 100644 index 0000000000..53b69abe67 --- /dev/null +++ b/drivers/gpio/gpio-pcf857x.c @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders + * + * Copyright (C) 2007 David Brownell + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct i2c_device_id pcf857x_id[] = { + { "pcf8574", 8 }, + { "pcf8574a", 8 }, + { "pca8574", 8 }, + { "pca9670", 8 }, + { "pca9672", 8 }, + { "pca9674", 8 }, + { "pcf8575", 16 }, + { "pca8575", 16 }, + { "pca9671", 16 }, + { "pca9673", 16 }, + { "pca9675", 16 }, + { "max7328", 8 }, + { "max7329", 8 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pcf857x_id); + +static const struct of_device_id pcf857x_of_table[] = { + { .compatible = "nxp,pcf8574", (void *)8 }, + { .compatible = "nxp,pcf8574a", (void *)8 }, + { .compatible = "nxp,pca8574", (void *)8 }, + { .compatible = "nxp,pca9670", (void *)8 }, + { .compatible = "nxp,pca9672", (void *)8 }, + { .compatible = "nxp,pca9674", (void *)8 }, + { .compatible = "nxp,pcf8575", (void *)16 }, + { .compatible = "nxp,pca8575", (void *)16 }, + { .compatible = "nxp,pca9671", (void *)16 }, + { .compatible = "nxp,pca9673", (void *)16 }, + { .compatible = "nxp,pca9675", (void *)16 }, + { .compatible = "maxim,max7328", (void *)8 }, + { .compatible = "maxim,max7329", (void *)8 }, + { } +}; +MODULE_DEVICE_TABLE(of, pcf857x_of_table); + +/* + * The pcf857x, pca857x, and pca967x chips only expose one read and one + * write register. Writing a "one" bit (to match the reset state) lets + * that pin be used as an input; it's not an open-drain model, but acts + * a bit like one. This is described as "quasi-bidirectional"; read the + * chip documentation for details. + * + * Many other I2C GPIO expander chips (like the pca953x models) have + * more complex register models and more conventional circuitry using + * push/pull drivers. They often use the same 0x20..0x27 addresses as + * pcf857x parts, making the "legacy" I2C driver model problematic. + */ +struct pcf857x { + struct gpio_chip chip; + struct i2c_client *client; + struct mutex lock; /* protect 'out' */ + unsigned int out; /* software latch */ + unsigned int status; /* current status */ + unsigned int irq_enabled; /* enabled irqs */ + + int (*write)(struct i2c_client *client, unsigned int data); + int (*read)(struct i2c_client *client); +}; + +/*-------------------------------------------------------------------------*/ + +/* Talk to 8-bit I/O expander */ + +static int i2c_write_le8(struct i2c_client *client, unsigned int data) +{ + return i2c_smbus_write_byte(client, data); +} + +static int i2c_read_le8(struct i2c_client *client) +{ + return i2c_smbus_read_byte(client); +} + +/* Talk to 16-bit I/O expander */ + +static int i2c_write_le16(struct i2c_client *client, unsigned int word) +{ + u8 buf[2] = { word & 0xff, word >> 8, }; + int status; + + status = i2c_master_send(client, buf, 2); + return (status < 0) ? status : 0; +} + +static int i2c_read_le16(struct i2c_client *client) +{ + u8 buf[2]; + int status; + + status = i2c_master_recv(client, buf, 2); + if (status < 0) + return status; + return (buf[1] << 8) | buf[0]; +} + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_input(struct gpio_chip *chip, unsigned int offset) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + int status; + + mutex_lock(&gpio->lock); + gpio->out |= (1 << offset); + status = gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static int pcf857x_get(struct gpio_chip *chip, unsigned int offset) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + int value; + + value = gpio->read(gpio->client); + return (value < 0) ? value : !!(value & (1 << offset)); +} + +static int pcf857x_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + int value = gpio->read(gpio->client); + + if (value < 0) + return value; + + *bits &= ~*mask; + *bits |= value & *mask; + + return 0; +} + +static int pcf857x_output(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + unsigned int bit = 1 << offset; + int status; + + mutex_lock(&gpio->lock); + if (value) + gpio->out |= bit; + else + gpio->out &= ~bit; + status = gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static void pcf857x_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + pcf857x_output(chip, offset, value); +} + +static void pcf857x_set_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct pcf857x *gpio = gpiochip_get_data(chip); + + mutex_lock(&gpio->lock); + gpio->out &= ~*mask; + gpio->out |= *bits & *mask; + gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); +} + +/*-------------------------------------------------------------------------*/ + +static irqreturn_t pcf857x_irq(int irq, void *data) +{ + struct pcf857x *gpio = data; + unsigned long change, i, status; + + status = gpio->read(gpio->client); + + /* + * call the interrupt handler iff gpio is used as + * interrupt source, just to avoid bad irqs + */ + mutex_lock(&gpio->lock); + change = (gpio->status ^ status) & gpio->irq_enabled; + gpio->status = status; + mutex_unlock(&gpio->lock); + + for_each_set_bit(i, &change, gpio->chip.ngpio) + handle_nested_irq(irq_find_mapping(gpio->chip.irq.domain, i)); + + return IRQ_HANDLED; +} + +/* + * NOP functions + */ +static void noop(struct irq_data *data) { } + +static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + return irq_set_irq_wake(gpio->client->irq, on); +} + +static void pcf857x_irq_enable(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + irq_hw_number_t hwirq = irqd_to_hwirq(data); + + gpiochip_enable_irq(&gpio->chip, hwirq); + gpio->irq_enabled |= (1 << hwirq); +} + +static void pcf857x_irq_disable(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + irq_hw_number_t hwirq = irqd_to_hwirq(data); + + gpio->irq_enabled &= ~(1 << hwirq); + gpiochip_disable_irq(&gpio->chip, hwirq); +} + +static void pcf857x_irq_bus_lock(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + mutex_lock(&gpio->lock); +} + +static void pcf857x_irq_bus_sync_unlock(struct irq_data *data) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + mutex_unlock(&gpio->lock); +} + +static const struct irq_chip pcf857x_irq_chip = { + .name = "pcf857x", + .irq_enable = pcf857x_irq_enable, + .irq_disable = pcf857x_irq_disable, + .irq_ack = noop, + .irq_mask = noop, + .irq_unmask = noop, + .irq_set_wake = pcf857x_irq_set_wake, + .irq_bus_lock = pcf857x_irq_bus_lock, + .irq_bus_sync_unlock = pcf857x_irq_bus_sync_unlock, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, +}; + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_probe(struct i2c_client *client) +{ + struct pcf857x *gpio; + unsigned int n_latch = 0; + int status; + + device_property_read_u32(&client->dev, "lines-initial-states", &n_latch); + + /* Allocate, initialize, and register this gpio_chip. */ + gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + mutex_init(&gpio->lock); + + gpio->chip.base = -1; + gpio->chip.can_sleep = true; + gpio->chip.parent = &client->dev; + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = pcf857x_get; + gpio->chip.get_multiple = pcf857x_get_multiple; + gpio->chip.set = pcf857x_set; + gpio->chip.set_multiple = pcf857x_set_multiple; + gpio->chip.direction_input = pcf857x_input; + gpio->chip.direction_output = pcf857x_output; + gpio->chip.ngpio = (uintptr_t)i2c_get_match_data(client); + + /* NOTE: the OnSemi jlc1562b is also largely compatible with + * these parts, notably for output. It has a low-resolution + * DAC instead of pin change IRQs; and its inputs can be the + * result of comparators. + */ + + /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f; + * 9670, 9672, 9764, and 9764a use quite a variety. + * + * NOTE: we don't distinguish here between *4 and *4a parts. + */ + if (gpio->chip.ngpio == 8) { + gpio->write = i2c_write_le8; + gpio->read = i2c_read_le8; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_smbus_read_byte(client); + + /* '75/'75c addresses are 0x20..0x27, just like the '74; + * the '75c doesn't have a current source pulling high. + * 9671, 9673, and 9765 use quite a variety of addresses. + * + * NOTE: we don't distinguish here between '75 and '75c parts. + */ + } else if (gpio->chip.ngpio == 16) { + gpio->write = i2c_write_le16; + gpio->read = i2c_read_le16; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_read_le16(client); + + } else { + dev_dbg(&client->dev, "unsupported number of gpios\n"); + status = -EINVAL; + } + + if (status < 0) + goto fail; + + gpio->chip.label = client->name; + + gpio->client = client; + i2c_set_clientdata(client, gpio); + + /* NOTE: these chips have strange "quasi-bidirectional" I/O pins. + * We can't actually know whether a pin is configured (a) as output + * and driving the signal low, or (b) as input and reporting a low + * value ... without knowing the last value written since the chip + * came out of reset (if any). We can't read the latched output. + * + * In short, the only reliable solution for setting up pin direction + * is to do it explicitly. The setup() method can do that, but it + * may cause transient glitching since it can't know the last value + * written (some pins may need to be driven low). + * + * Using n_latch avoids that trouble. When left initialized to zero, + * our software copy of the "latch" then matches the chip's all-ones + * reset state. Otherwise it flags pins to be driven low. + */ + gpio->out = ~n_latch; + gpio->status = gpio->read(gpio->client); + + /* Enable irqchip if we have an interrupt */ + if (client->irq) { + struct gpio_irq_chip *girq; + + status = devm_request_threaded_irq(&client->dev, client->irq, + NULL, pcf857x_irq, IRQF_ONESHOT | + IRQF_TRIGGER_FALLING | IRQF_SHARED, + dev_name(&client->dev), gpio); + if (status) + goto fail; + + girq = &gpio->chip.irq; + gpio_irq_chip_set_chip(girq, &pcf857x_irq_chip); + /* This will let us handle the parent IRQ in the driver */ + girq->parent_handler = NULL; + girq->num_parents = 0; + girq->parents = NULL; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_level_irq; + girq->threaded = true; + } + + status = devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio); + if (status < 0) + goto fail; + + dev_info(&client->dev, "probed\n"); + + return 0; + +fail: + dev_dbg(&client->dev, "probe error %d for '%s'\n", status, + client->name); + + return status; +} + +static void pcf857x_shutdown(struct i2c_client *client) +{ + struct pcf857x *gpio = i2c_get_clientdata(client); + + /* Drive all the I/O lines high */ + gpio->write(gpio->client, BIT(gpio->chip.ngpio) - 1); +} + +static struct i2c_driver pcf857x_driver = { + .driver = { + .name = "pcf857x", + .of_match_table = pcf857x_of_table, + }, + .probe = pcf857x_probe, + .shutdown = pcf857x_shutdown, + .id_table = pcf857x_id, +}; + +static int __init pcf857x_init(void) +{ + return i2c_add_driver(&pcf857x_driver); +} +/* register after i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(pcf857x_init); + +static void __exit pcf857x_exit(void) +{ + i2c_del_driver(&pcf857x_driver); +} +module_exit(pcf857x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); -- cgit v1.2.3