From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Thu, 11 Apr 2024 10:27:49 +0200
Subject: Adding upstream version 6.6.15.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 2821 +++++++++++++++++++++++++++++
 1 file changed, 2821 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.c

(limited to 'drivers/gpu/drm/bridge/analogix/anx7625.c')

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
new file mode 100644
index 0000000000..5168628f11
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -0,0 +1,2821 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright(c) 2020, Analogix Semiconductor. All rights reserved.
+ *
+ */
+#include <linux/gcd.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+
+#include <drm/display/drm_dp_aux_bus.h>
+#include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_hdcp_helper.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include <media/v4l2-fwnode.h>
+#include <sound/hdmi-codec.h>
+#include <video/display_timing.h>
+
+#include "anx7625.h"
+
+/*
+ * There is a sync issue while access I2C register between AP(CPU) and
+ * internal firmware(OCM), to avoid the race condition, AP should access
+ * the reserved slave address before slave address occurs changes.
+ */
+static int i2c_access_workaround(struct anx7625_data *ctx,
+				 struct i2c_client *client)
+{
+	u8 offset;
+	struct device *dev = &client->dev;
+	int ret;
+
+	if (client == ctx->last_client)
+		return 0;
+
+	ctx->last_client = client;
+
+	if (client == ctx->i2c.tcpc_client)
+		offset = RSVD_00_ADDR;
+	else if (client == ctx->i2c.tx_p0_client)
+		offset = RSVD_D1_ADDR;
+	else if (client == ctx->i2c.tx_p1_client)
+		offset = RSVD_60_ADDR;
+	else if (client == ctx->i2c.rx_p0_client)
+		offset = RSVD_39_ADDR;
+	else if (client == ctx->i2c.rx_p1_client)
+		offset = RSVD_7F_ADDR;
+	else
+		offset = RSVD_00_ADDR;
+
+	ret = i2c_smbus_write_byte_data(client, offset, 0x00);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev,
+			      "fail to access i2c id=%x\n:%x",
+			      client->addr, offset);
+
+	return ret;
+}
+
+static int anx7625_reg_read(struct anx7625_data *ctx,
+			    struct i2c_client *client, u8 reg_addr)
+{
+	int ret;
+	struct device *dev = &client->dev;
+
+	i2c_access_workaround(ctx, client);
+
+	ret = i2c_smbus_read_byte_data(client, reg_addr);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "read i2c fail id=%x:%x\n",
+			      client->addr, reg_addr);
+
+	return ret;
+}
+
+static int anx7625_reg_block_read(struct anx7625_data *ctx,
+				  struct i2c_client *client,
+				  u8 reg_addr, u8 len, u8 *buf)
+{
+	int ret;
+	struct device *dev = &client->dev;
+
+	i2c_access_workaround(ctx, client);
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "read i2c block fail id=%x:%x\n",
+			      client->addr, reg_addr);
+
+	return ret;
+}
+
+static int anx7625_reg_write(struct anx7625_data *ctx,
+			     struct i2c_client *client,
+			     u8 reg_addr, u8 reg_val)
+{
+	int ret;
+	struct device *dev = &client->dev;
+
+	i2c_access_workaround(ctx, client);
+
+	ret = i2c_smbus_write_byte_data(client, reg_addr, reg_val);
+
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "fail to write i2c id=%x\n:%x",
+			      client->addr, reg_addr);
+
+	return ret;
+}
+
+static int anx7625_reg_block_write(struct anx7625_data *ctx,
+				   struct i2c_client *client,
+				   u8 reg_addr, u8 len, u8 *buf)
+{
+	int ret;
+	struct device *dev = &client->dev;
+
+	i2c_access_workaround(ctx, client);
+
+	ret = i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
+	if (ret < 0)
+		dev_err(dev, "write i2c block failed id=%x\n:%x",
+			client->addr, reg_addr);
+
+	return ret;
+}
+
+static int anx7625_write_or(struct anx7625_data *ctx,
+			    struct i2c_client *client,
+			    u8 offset, u8 mask)
+{
+	int val;
+
+	val = anx7625_reg_read(ctx, client, offset);
+	if (val < 0)
+		return val;
+
+	return anx7625_reg_write(ctx, client, offset, (val | (mask)));
+}
+
+static int anx7625_write_and(struct anx7625_data *ctx,
+			     struct i2c_client *client,
+			     u8 offset, u8 mask)
+{
+	int val;
+
+	val = anx7625_reg_read(ctx, client, offset);
+	if (val < 0)
+		return val;
+
+	return anx7625_reg_write(ctx, client, offset, (val & (mask)));
+}
+
+static int anx7625_write_and_or(struct anx7625_data *ctx,
+				struct i2c_client *client,
+				u8 offset, u8 and_mask, u8 or_mask)
+{
+	int val;
+
+	val = anx7625_reg_read(ctx, client, offset);
+	if (val < 0)
+		return val;
+
+	return anx7625_reg_write(ctx, client,
+				 offset, (val & and_mask) | (or_mask));
+}
+
+static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
+{
+	int i, ret;
+
+	ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
+			       AUDIO_CONTROL_REGISTER, 0x80);
+	for (i = 0; i < 13; i++)
+		ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+					 VIDEO_BIT_MATRIX_12 + i,
+					 0x18 + i);
+
+	return ret;
+}
+
+static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
+{
+	return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, AP_AUX_CTRL_STATUS);
+}
+
+static int wait_aux_op_finish(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int val;
+	int ret;
+
+	ret = readx_poll_timeout(anx7625_read_ctrl_status_p0,
+				 ctx, val,
+				 (!(val & AP_AUX_CTRL_OP_EN) || (val < 0)),
+				 2000,
+				 2000 * 150);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "aux operation fail!\n");
+		return -EIO;
+	}
+
+	val = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client,
+			       AP_AUX_CTRL_STATUS);
+	if (val < 0 || (val & 0x0F)) {
+		DRM_DEV_ERROR(dev, "aux status %02x\n", val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx7625_aux_trans(struct anx7625_data *ctx, u8 op, u32 address,
+			     u8 len, u8 *buf)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+	u8 addrh, addrm, addrl;
+	u8 cmd;
+	bool is_write = !(op & DP_AUX_I2C_READ);
+
+	if (len > DP_AUX_MAX_PAYLOAD_BYTES) {
+		dev_err(dev, "exceed aux buffer len.\n");
+		return -EINVAL;
+	}
+
+	if (!len)
+		return len;
+
+	addrl = address & 0xFF;
+	addrm = (address >> 8) & 0xFF;
+	addrh = (address >> 16) & 0xFF;
+
+	if (!is_write)
+		op &= ~DP_AUX_I2C_MOT;
+	cmd = DPCD_CMD(len, op);
+
+	/* Set command and length */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_COMMAND, cmd);
+
+	/* Set aux access address */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_7_0, addrl);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_15_8, addrm);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_19_16, addrh);
+
+	if (is_write)
+		ret |= anx7625_reg_block_write(ctx, ctx->i2c.rx_p0_client,
+					       AP_AUX_BUFF_START, len, buf);
+	/* Enable aux access */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+
+	if (ret < 0) {
+		dev_err(dev, "cannot access aux related register.\n");
+		return -EIO;
+	}
+
+	ret = wait_aux_op_finish(ctx);
+	if (ret < 0) {
+		dev_err(dev, "aux IO error: wait aux op finish.\n");
+		return ret;
+	}
+
+	/* Write done */
+	if (is_write)
+		return len;
+
+	/* Read done, read out dpcd data */
+	ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+				     AP_AUX_BUFF_START, len, buf);
+	if (ret < 0) {
+		dev_err(dev, "read dpcd register failed\n");
+		return -EIO;
+	}
+
+	return len;
+}
+
+static int anx7625_video_mute_control(struct anx7625_data *ctx,
+				      u8 status)
+{
+	int ret;
+
+	if (status) {
+		/* Set mute on flag */
+		ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+				       AP_AV_STATUS, AP_MIPI_MUTE);
+		/* Clear mipi RX en */
+		ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+					 AP_AV_STATUS, (u8)~AP_MIPI_RX_EN);
+	} else {
+		/* Mute off flag */
+		ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+					AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
+		/* Set MIPI RX EN */
+		ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+					AP_AV_STATUS, AP_MIPI_RX_EN);
+	}
+
+	return ret;
+}
+
+/* Reduction of fraction a/b */
+static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
+{
+	unsigned long gcd_num;
+	unsigned long tmp_a, tmp_b;
+	u32 i = 1;
+
+	gcd_num = gcd(*a, *b);
+	*a /= gcd_num;
+	*b /= gcd_num;
+
+	tmp_a = *a;
+	tmp_b = *b;
+
+	while ((*a > MAX_UNSIGNED_24BIT) || (*b > MAX_UNSIGNED_24BIT)) {
+		i++;
+		*a = tmp_a / i;
+		*b = tmp_b / i;
+	}
+
+	/*
+	 * In the end, make a, b larger to have higher ODFC PLL
+	 * output frequency accuracy
+	 */
+	while ((*a < MAX_UNSIGNED_24BIT) && (*b < MAX_UNSIGNED_24BIT)) {
+		*a <<= 1;
+		*b <<= 1;
+	}
+
+	*a >>= 1;
+	*b >>= 1;
+}
+
+static int anx7625_calculate_m_n(u32 pixelclock,
+				 unsigned long *m,
+				 unsigned long *n,
+				 u8 *post_divider)
+{
+	if (pixelclock > PLL_OUT_FREQ_ABS_MAX / POST_DIVIDER_MIN) {
+		/* Pixel clock frequency is too high */
+		DRM_ERROR("pixelclock too high, act(%d), maximum(%lu)\n",
+			  pixelclock,
+			  PLL_OUT_FREQ_ABS_MAX / POST_DIVIDER_MIN);
+		return -EINVAL;
+	}
+
+	if (pixelclock < PLL_OUT_FREQ_ABS_MIN / POST_DIVIDER_MAX) {
+		/* Pixel clock frequency is too low */
+		DRM_ERROR("pixelclock too low, act(%d), maximum(%lu)\n",
+			  pixelclock,
+			  PLL_OUT_FREQ_ABS_MIN / POST_DIVIDER_MAX);
+		return -EINVAL;
+	}
+
+	for (*post_divider = 1;
+		pixelclock < (PLL_OUT_FREQ_MIN / (*post_divider));)
+		*post_divider += 1;
+
+	if (*post_divider > POST_DIVIDER_MAX) {
+		for (*post_divider = 1;
+			(pixelclock <
+			 (PLL_OUT_FREQ_ABS_MIN / (*post_divider)));)
+			*post_divider += 1;
+
+		if (*post_divider > POST_DIVIDER_MAX) {
+			DRM_ERROR("cannot find property post_divider(%d)\n",
+				  *post_divider);
+			return -EDOM;
+		}
+	}
+
+	/* Patch to improve the accuracy */
+	if (*post_divider == 7) {
+		/* 27,000,000 is not divisible by 7 */
+		*post_divider = 8;
+	} else if (*post_divider == 11) {
+		/* 27,000,000 is not divisible by 11 */
+		*post_divider = 12;
+	} else if ((*post_divider == 13) || (*post_divider == 14)) {
+		/* 27,000,000 is not divisible by 13 or 14 */
+		*post_divider = 15;
+	}
+
+	if (pixelclock * (*post_divider) > PLL_OUT_FREQ_ABS_MAX) {
+		DRM_ERROR("act clock(%u) large than maximum(%lu)\n",
+			  pixelclock * (*post_divider),
+			  PLL_OUT_FREQ_ABS_MAX);
+		return -EDOM;
+	}
+
+	*m = pixelclock;
+	*n = XTAL_FRQ / (*post_divider);
+
+	anx7625_reduction_of_a_fraction(m, n);
+
+	return 0;
+}
+
+static int anx7625_odfc_config(struct anx7625_data *ctx,
+			       u8 post_divider)
+{
+	int ret;
+	struct device *dev = ctx->dev;
+
+	/* Config input reference clock frequency 27MHz/19.2MHz */
+	ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_16,
+				~(REF_CLK_27000KHZ << MIPI_FREF_D_IND));
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_16,
+				(REF_CLK_27000KHZ << MIPI_FREF_D_IND));
+	/* Post divider */
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_DIGITAL_PLL_8, 0x0f);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_8,
+				post_divider << 4);
+
+	/* Add patch for MIS2-125 (5pcs ANX7625 fail ATE MBIST test) */
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_7,
+				 ~MIPI_PLL_VCO_TUNE_REG_VAL);
+
+	/* Reset ODFC PLL */
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_7,
+				 ~MIPI_PLL_RESET_N);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_7,
+				MIPI_PLL_RESET_N);
+
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "IO error.\n");
+
+	return ret;
+}
+
+/*
+ * The MIPI source video data exist large variation (e.g. 59Hz ~ 61Hz),
+ * anx7625 defined K ratio for matching MIPI input video clock and
+ * DP output video clock. Increase K value can match bigger video data
+ * variation. IVO panel has small variation than DP CTS spec, need
+ * decrease the K value.
+ */
+static int anx7625_set_k_value(struct anx7625_data *ctx)
+{
+	struct edid *edid = (struct edid *)ctx->slimport_edid_p.edid_raw_data;
+
+	if (edid->mfg_id[0] == IVO_MID0 && edid->mfg_id[1] == IVO_MID1)
+		return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+					 MIPI_DIGITAL_ADJ_1, 0x3B);
+
+	return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_DIGITAL_ADJ_1, 0x3D);
+}
+
+static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	unsigned long m, n;
+	u16 htotal;
+	int ret;
+	u8 post_divider = 0;
+
+	ret = anx7625_calculate_m_n(ctx->dt.pixelclock.min * 1000,
+				    &m, &n, &post_divider);
+
+	if (ret) {
+		DRM_DEV_ERROR(dev, "cannot get property m n value.\n");
+		return ret;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "compute M(%lu), N(%lu), divider(%d).\n",
+			     m, n, post_divider);
+
+	/* Configure pixel clock */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, PIXEL_CLOCK_L,
+				(ctx->dt.pixelclock.min / 1000) & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, PIXEL_CLOCK_H,
+				 (ctx->dt.pixelclock.min / 1000) >> 8);
+	/* Lane count */
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
+			MIPI_LANE_CTRL_0, 0xfc);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
+				MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
+
+	/* Htotal */
+	htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
+		ctx->dt.hback_porch.min + ctx->dt.hsync_len.min;
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_TOTAL_PIXELS_L, htotal & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_TOTAL_PIXELS_H, htotal >> 8);
+	/* Hactive */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_ACTIVE_PIXELS_L, ctx->dt.hactive.min & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_ACTIVE_PIXELS_H, ctx->dt.hactive.min >> 8);
+	/* HFP */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_FRONT_PORCH_L, ctx->dt.hfront_porch.min);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_FRONT_PORCH_H,
+			ctx->dt.hfront_porch.min >> 8);
+	/* HWS */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_SYNC_WIDTH_L, ctx->dt.hsync_len.min);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_SYNC_WIDTH_H, ctx->dt.hsync_len.min >> 8);
+	/* HBP */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_BACK_PORCH_L, ctx->dt.hback_porch.min);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			HORIZONTAL_BACK_PORCH_H, ctx->dt.hback_porch.min >> 8);
+	/* Vactive */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, ACTIVE_LINES_L,
+			ctx->dt.vactive.min);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client, ACTIVE_LINES_H,
+			ctx->dt.vactive.min >> 8);
+	/* VFP */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			VERTICAL_FRONT_PORCH, ctx->dt.vfront_porch.min);
+	/* VWS */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			VERTICAL_SYNC_WIDTH, ctx->dt.vsync_len.min);
+	/* VBP */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p2_client,
+			VERTICAL_BACK_PORCH, ctx->dt.vback_porch.min);
+	/* M value */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+			MIPI_PLL_M_NUM_23_16, (m >> 16) & 0xff);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+			MIPI_PLL_M_NUM_15_8, (m >> 8) & 0xff);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+			MIPI_PLL_M_NUM_7_0, (m & 0xff));
+	/* N value */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+			MIPI_PLL_N_NUM_23_16, (n >> 16) & 0xff);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+			MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0,
+			(n & 0xff));
+
+	anx7625_set_k_value(ctx);
+
+	ret |= anx7625_odfc_config(ctx, post_divider - 1);
+
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "mipi dsi setup IO error.\n");
+
+	return ret;
+}
+
+static int anx7625_swap_dsi_lane3(struct anx7625_data *ctx)
+{
+	int val;
+	struct device *dev = ctx->dev;
+
+	/* Swap MIPI-DSI data lane 3 P and N */
+	val = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, MIPI_SWAP);
+	if (val < 0) {
+		DRM_DEV_ERROR(dev, "IO error : access MIPI_SWAP.\n");
+		return -EIO;
+	}
+
+	val |= (1 << MIPI_SWAP_CH3);
+	return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_SWAP, val);
+}
+
+static int anx7625_api_dsi_config(struct anx7625_data *ctx)
+
+{
+	int val, ret;
+	struct device *dev = ctx->dev;
+
+	/* Swap MIPI-DSI data lane 3 P and N */
+	ret = anx7625_swap_dsi_lane3(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : swap dsi lane 3 fail.\n");
+		return ret;
+	}
+
+	/* DSI clock settings */
+	val = (0 << MIPI_HS_PWD_CLK)		|
+		(0 << MIPI_HS_RT_CLK)		|
+		(0 << MIPI_PD_CLK)		|
+		(1 << MIPI_CLK_RT_MANUAL_PD_EN)	|
+		(1 << MIPI_CLK_HS_MANUAL_PD_EN)	|
+		(0 << MIPI_CLK_DET_DET_BYPASS)	|
+		(0 << MIPI_CLK_MISS_CTRL)	|
+		(0 << MIPI_PD_LPTX_CH_MANUAL_PD_EN);
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				MIPI_PHY_CONTROL_3, val);
+
+	/*
+	 * Decreased HS prepare timing delay from 160ns to 80ns work with
+	 *     a) Dragon board 810 series (Qualcomm AP)
+	 *     b) Moving Pixel DSI source (PG3A pattern generator +
+	 *	P332 D-PHY Probe) default D-PHY timing
+	 *	5ns/step
+	 */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_TIME_HS_PRPR, 0x10);
+
+	/* Enable DSI mode*/
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_18,
+				SELECT_DSI << MIPI_DPI_SELECT);
+
+	ret |= anx7625_dsi_video_timing_config(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "dsi video timing config fail\n");
+		return ret;
+	}
+
+	/* Toggle m, n ready */
+	ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_6,
+				~(MIPI_M_NUM_READY | MIPI_N_NUM_READY));
+	usleep_range(1000, 1100);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, MIPI_DIGITAL_PLL_6,
+				MIPI_M_NUM_READY | MIPI_N_NUM_READY);
+
+	/* Configure integer stable register */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_VIDEO_STABLE_CNT, 0x02);
+	/* Power on MIPI RX */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_LANE_CTRL_10, 0x00);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_LANE_CTRL_10, 0x80);
+
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "IO error : mipi dsi enable init fail.\n");
+
+	return ret;
+}
+
+static int anx7625_dsi_config(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "config dsi.\n");
+
+	/* DSC disable */
+	ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+				R_DSC_CTRL_0, ~DSC_EN);
+
+	ret |= anx7625_api_dsi_config(ctx);
+
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : api dsi config error.\n");
+		return ret;
+	}
+
+	/* Set MIPI RX EN */
+	ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+			       AP_AV_STATUS, AP_MIPI_RX_EN);
+	/* Clear mute flag */
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+				 AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "IO error : enable mipi rx fail.\n");
+	else
+		DRM_DEV_DEBUG_DRIVER(dev, "success to config DSI\n");
+
+	return ret;
+}
+
+static int anx7625_api_dpi_config(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	u16 freq = ctx->dt.pixelclock.min / 1000;
+	int ret;
+
+	/* configure pixel clock */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				PIXEL_CLOCK_L, freq & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 PIXEL_CLOCK_H, (freq >> 8));
+
+	/* set DPI mode */
+	/* set to DPI PLL module sel */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_DIGITAL_PLL_9, 0x20);
+	/* power down MIPI */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_LANE_CTRL_10, 0x08);
+	/* enable DPI mode */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+				 MIPI_DIGITAL_PLL_18, 0x1C);
+	/* set first edge */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+				 VIDEO_CONTROL_0, 0x06);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
+
+	return ret;
+}
+
+static int anx7625_dpi_config(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
+
+	/* DSC disable */
+	ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+				R_DSC_CTRL_0, ~DSC_EN);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
+		return ret;
+	}
+
+	ret = anx7625_config_bit_matrix(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
+		return ret;
+	}
+
+	ret = anx7625_api_dpi_config(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
+		return ret;
+	}
+
+	/* set MIPI RX EN */
+	ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+			       AP_AV_STATUS, AP_MIPI_RX_EN);
+	/* clear mute flag */
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+				 AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
+
+	return ret;
+}
+
+static int anx7625_read_flash_status(struct anx7625_data *ctx)
+{
+	return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, R_RAM_CTRL);
+}
+
+static int anx7625_hdcp_key_probe(struct anx7625_data *ctx)
+{
+	int ret, val;
+	struct device *dev = ctx->dev;
+	u8 ident[FLASH_BUF_LEN];
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				FLASH_ADDR_HIGH, 0x91);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 FLASH_ADDR_LOW, 0xA0);
+	if (ret < 0) {
+		dev_err(dev, "IO error : set key flash address.\n");
+		return ret;
+	}
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				FLASH_LEN_HIGH, (FLASH_BUF_LEN - 1) >> 8);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 FLASH_LEN_LOW, (FLASH_BUF_LEN - 1) & 0xFF);
+	if (ret < 0) {
+		dev_err(dev, "IO error : set key flash len.\n");
+		return ret;
+	}
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				R_FLASH_RW_CTRL, FLASH_READ);
+	ret |= readx_poll_timeout(anx7625_read_flash_status,
+				  ctx, val,
+				  ((val & FLASH_DONE) || (val < 0)),
+				  2000,
+				  2000 * 150);
+	if (ret) {
+		dev_err(dev, "flash read access fail!\n");
+		return -EIO;
+	}
+
+	ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+				     FLASH_BUF_BASE_ADDR,
+				     FLASH_BUF_LEN, ident);
+	if (ret < 0) {
+		dev_err(dev, "read flash data fail!\n");
+		return -EIO;
+	}
+
+	if (ident[29] == 0xFF && ident[30] == 0xFF && ident[31] == 0xFF)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int anx7625_hdcp_key_load(struct anx7625_data *ctx)
+{
+	int ret;
+	struct device *dev = ctx->dev;
+
+	/* Select HDCP 1.4 KEY */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				R_BOOT_RETRY, 0x12);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 FLASH_ADDR_HIGH, HDCP14KEY_START_ADDR >> 8);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 FLASH_ADDR_LOW, HDCP14KEY_START_ADDR & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 R_RAM_LEN_H, HDCP14KEY_SIZE >> 12);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 R_RAM_LEN_L, HDCP14KEY_SIZE >> 4);
+
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 R_RAM_ADDR_H, 0);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 R_RAM_ADDR_L, 0);
+	/* Enable HDCP 1.4 KEY load */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 R_RAM_CTRL, DECRYPT_EN | LOAD_START);
+	dev_dbg(dev, "load HDCP 1.4 key done\n");
+	return ret;
+}
+
+static int anx7625_hdcp_disable(struct anx7625_data *ctx)
+{
+	int ret;
+	struct device *dev = ctx->dev;
+
+	dev_dbg(dev, "disable HDCP 1.4\n");
+
+	/* Disable HDCP */
+	ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
+	/* Try auth flag */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
+	/* Interrupt for DRM */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
+	if (ret < 0)
+		dev_err(dev, "fail to disable HDCP\n");
+
+	return anx7625_write_and(ctx, ctx->i2c.tx_p0_client,
+				 TX_HDCP_CTRL0, ~HARD_AUTH_EN & 0xFF);
+}
+
+static int anx7625_hdcp_enable(struct anx7625_data *ctx)
+{
+	u8 bcap;
+	int ret;
+	struct device *dev = ctx->dev;
+
+	ret = anx7625_hdcp_key_probe(ctx);
+	if (ret) {
+		dev_dbg(dev, "no key found, not to do hdcp\n");
+		return ret;
+	}
+
+	/* Read downstream capability */
+	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_READ, DP_AUX_HDCP_BCAPS, 1, &bcap);
+	if (ret < 0)
+		return ret;
+
+	if (!(bcap & DP_BCAPS_HDCP_CAPABLE)) {
+		pr_warn("downstream not support HDCP 1.4, cap(%x).\n", bcap);
+		return 0;
+	}
+
+	dev_dbg(dev, "enable HDCP 1.4\n");
+
+	/* First clear HDCP state */
+	ret = anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
+				TX_HDCP_CTRL0,
+				KSVLIST_VLD | BKSV_SRM_PASS | RE_AUTHEN);
+	usleep_range(1000, 1100);
+	/* Second clear HDCP state */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
+				 TX_HDCP_CTRL0,
+				 KSVLIST_VLD | BKSV_SRM_PASS | RE_AUTHEN);
+
+	/* Set time for waiting KSVR */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
+				 SP_TX_WAIT_KSVR_TIME, 0xc8);
+	/* Set time for waiting R0 */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p0_client,
+				 SP_TX_WAIT_R0_TIME, 0xb0);
+	ret |= anx7625_hdcp_key_load(ctx);
+	if (ret) {
+		pr_warn("prepare HDCP key failed.\n");
+		return ret;
+	}
+
+	ret = anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
+
+	/* Try auth flag */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
+	/* Interrupt for DRM */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
+	if (ret < 0)
+		dev_err(dev, "fail to enable HDCP\n");
+
+	return anx7625_write_or(ctx, ctx->i2c.tx_p0_client,
+				TX_HDCP_CTRL0, HARD_AUTH_EN);
+}
+
+static void anx7625_dp_start(struct anx7625_data *ctx)
+{
+	int ret;
+	struct device *dev = ctx->dev;
+	u8 data;
+
+	if (!ctx->display_timing_valid) {
+		DRM_DEV_ERROR(dev, "mipi not set display timing yet.\n");
+		return;
+	}
+
+	dev_dbg(dev, "set downstream sink into normal\n");
+	/* Downstream sink enter into normal mode */
+	data = DP_SET_POWER_D0;
+	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
+	if (ret < 0)
+		dev_err(dev, "IO error : set sink into normal mode fail\n");
+
+	/* Disable HDCP */
+	anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
+
+	if (ctx->pdata.is_dpi)
+		ret = anx7625_dpi_config(ctx);
+	else
+		ret = anx7625_dsi_config(ctx);
+
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
+
+	ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
+
+	ctx->dp_en = 1;
+}
+
+static void anx7625_dp_stop(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+	u8 data;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "stop dp output\n");
+
+	/*
+	 * Video disable: 0x72:08 bit 7 = 0;
+	 * Audio disable: 0x70:87 bit 0 = 0;
+	 */
+	ret = anx7625_write_and(ctx, ctx->i2c.tx_p0_client, 0x87, 0xfe);
+	ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client, 0x08, 0x7f);
+
+	ret |= anx7625_video_mute_control(ctx, 1);
+
+	dev_dbg(dev, "notify downstream enter into standby\n");
+	/* Downstream monitor enter into standby mode */
+	data = DP_SET_POWER_D3;
+	ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
+
+	ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
+
+	ctx->dp_en = 0;
+}
+
+static int sp_tx_rst_aux(struct anx7625_data *ctx)
+{
+	int ret;
+
+	ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client, RST_CTRL2,
+			       AUX_RST);
+	ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client, RST_CTRL2,
+				 ~AUX_RST);
+	return ret;
+}
+
+static int sp_tx_aux_wr(struct anx7625_data *ctx, u8 offset)
+{
+	int ret;
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_BUFF_START, offset);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_COMMAND, 0x04);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+	return (ret | wait_aux_op_finish(ctx));
+}
+
+static int sp_tx_aux_rd(struct anx7625_data *ctx, u8 len_cmd)
+{
+	int ret;
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_COMMAND, len_cmd);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+	return (ret | wait_aux_op_finish(ctx));
+}
+
+static int sp_tx_get_edid_block(struct anx7625_data *ctx)
+{
+	int c = 0;
+	struct device *dev = ctx->dev;
+
+	sp_tx_aux_wr(ctx, 0x7e);
+	sp_tx_aux_rd(ctx, 0x01);
+	c = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, AP_AUX_BUFF_START);
+	if (c < 0) {
+		DRM_DEV_ERROR(dev, "IO error : access AUX BUFF.\n");
+		return -EIO;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, " EDID Block = %d\n", c + 1);
+
+	if (c > MAX_EDID_BLOCK)
+		c = 1;
+
+	return c;
+}
+
+static int edid_read(struct anx7625_data *ctx,
+		     u8 offset, u8 *pblock_buf)
+{
+	int ret, cnt;
+	struct device *dev = ctx->dev;
+
+	for (cnt = 0; cnt <= EDID_TRY_CNT; cnt++) {
+		sp_tx_aux_wr(ctx, offset);
+		/* Set I2C read com 0x01 mot = 0 and read 16 bytes */
+		ret = sp_tx_aux_rd(ctx, 0xf1);
+
+		if (ret) {
+			ret = sp_tx_rst_aux(ctx);
+			DRM_DEV_DEBUG_DRIVER(dev, "edid read fail, reset!\n");
+		} else {
+			ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+						     AP_AUX_BUFF_START,
+						     MAX_DPCD_BUFFER_SIZE,
+						     pblock_buf);
+			if (ret > 0)
+				break;
+		}
+	}
+
+	if (cnt > EDID_TRY_CNT)
+		return -EIO;
+
+	return ret;
+}
+
+static int segments_edid_read(struct anx7625_data *ctx,
+			      u8 segment, u8 *buf, u8 offset)
+{
+	u8 cnt;
+	int ret;
+	struct device *dev = ctx->dev;
+
+	/* Write address only */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_ADDR_7_0, 0x30);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_COMMAND, 0x04);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_CTRL_STATUS,
+				 AP_AUX_CTRL_ADDRONLY | AP_AUX_CTRL_OP_EN);
+
+	ret |= wait_aux_op_finish(ctx);
+	/* Write segment address */
+	ret |= sp_tx_aux_wr(ctx, segment);
+	/* Data read */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_7_0, 0x50);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "IO error : aux initial fail.\n");
+		return ret;
+	}
+
+	for (cnt = 0; cnt <= EDID_TRY_CNT; cnt++) {
+		sp_tx_aux_wr(ctx, offset);
+		/* Set I2C read com 0x01 mot = 0 and read 16 bytes */
+		ret = sp_tx_aux_rd(ctx, 0xf1);
+
+		if (ret) {
+			ret = sp_tx_rst_aux(ctx);
+			DRM_DEV_ERROR(dev, "segment read fail, reset!\n");
+		} else {
+			ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+						     AP_AUX_BUFF_START,
+						     MAX_DPCD_BUFFER_SIZE, buf);
+			if (ret > 0)
+				break;
+		}
+	}
+
+	if (cnt > EDID_TRY_CNT)
+		return -EIO;
+
+	return ret;
+}
+
+static int sp_tx_edid_read(struct anx7625_data *ctx,
+			   u8 *pedid_blocks_buf)
+{
+	u8 offset;
+	int edid_pos;
+	int count, blocks_num;
+	u8 pblock_buf[MAX_DPCD_BUFFER_SIZE];
+	u8 i, j;
+	int g_edid_break = 0;
+	int ret;
+	struct device *dev = ctx->dev;
+
+	/* Address initial */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_ADDR_7_0, 0x50);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_15_8, 0);
+	ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_19_16, 0xf0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "access aux channel IO error.\n");
+		return -EIO;
+	}
+
+	blocks_num = sp_tx_get_edid_block(ctx);
+	if (blocks_num < 0)
+		return blocks_num;
+
+	count = 0;
+
+	do {
+		switch (count) {
+		case 0:
+		case 1:
+			for (i = 0; i < 8; i++) {
+				offset = (i + count * 8) * MAX_DPCD_BUFFER_SIZE;
+				g_edid_break = edid_read(ctx, offset,
+							 pblock_buf);
+
+				if (g_edid_break < 0)
+					break;
+
+				memcpy(&pedid_blocks_buf[offset],
+				       pblock_buf,
+				       MAX_DPCD_BUFFER_SIZE);
+			}
+
+			break;
+		case 2:
+			offset = 0x00;
+
+			for (j = 0; j < 8; j++) {
+				edid_pos = (j + count * 8) *
+					MAX_DPCD_BUFFER_SIZE;
+
+				if (g_edid_break == 1)
+					break;
+
+				ret = segments_edid_read(ctx, count / 2,
+							 pblock_buf, offset);
+				if (ret < 0)
+					return ret;
+
+				memcpy(&pedid_blocks_buf[edid_pos],
+				       pblock_buf,
+				       MAX_DPCD_BUFFER_SIZE);
+				offset = offset + 0x10;
+			}
+
+			break;
+		case 3:
+			offset = 0x80;
+
+			for (j = 0; j < 8; j++) {
+				edid_pos = (j + count * 8) *
+					MAX_DPCD_BUFFER_SIZE;
+				if (g_edid_break == 1)
+					break;
+
+				ret = segments_edid_read(ctx, count / 2,
+							 pblock_buf, offset);
+				if (ret < 0)
+					return ret;
+
+				memcpy(&pedid_blocks_buf[edid_pos],
+				       pblock_buf,
+				       MAX_DPCD_BUFFER_SIZE);
+				offset = offset + 0x10;
+			}
+
+			break;
+		default:
+			break;
+		}
+
+		count++;
+
+	} while (blocks_num >= count);
+
+	/* Check edid data */
+	if (!drm_edid_is_valid((struct edid *)pedid_blocks_buf)) {
+		DRM_DEV_ERROR(dev, "WARNING! edid check fail!\n");
+		return -EINVAL;
+	}
+
+	/* Reset aux channel */
+	ret = sp_tx_rst_aux(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to reset aux channel!\n");
+		return ret;
+	}
+
+	return (blocks_num + 1);
+}
+
+static void anx7625_power_on(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret, i;
+
+	if (!ctx->pdata.low_power_mode) {
+		DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
+		ret = regulator_enable(ctx->pdata.supplies[i].consumer);
+		if (ret < 0) {
+			DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
+					     i, ret);
+			goto reg_err;
+		}
+		usleep_range(2000, 2100);
+	}
+
+	usleep_range(11000, 12000);
+
+	/* Power on pin enable */
+	gpiod_set_value(ctx->pdata.gpio_p_on, 1);
+	usleep_range(10000, 11000);
+	/* Power reset pin enable */
+	gpiod_set_value(ctx->pdata.gpio_reset, 1);
+	usleep_range(10000, 11000);
+
+	DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
+	return;
+reg_err:
+	for (--i; i >= 0; i--)
+		regulator_disable(ctx->pdata.supplies[i].consumer);
+}
+
+static void anx7625_power_standby(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+
+	if (!ctx->pdata.low_power_mode) {
+		DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
+		return;
+	}
+
+	gpiod_set_value(ctx->pdata.gpio_reset, 0);
+	usleep_range(1000, 1100);
+	gpiod_set_value(ctx->pdata.gpio_p_on, 0);
+	usleep_range(1000, 1100);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
+				     ctx->pdata.supplies);
+	if (ret < 0)
+		DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
+
+	DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
+}
+
+/* Basic configurations of ANX7625 */
+static void anx7625_config(struct anx7625_data *ctx)
+{
+	anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+			  XTAL_FRQ_SEL, XTAL_FRQ_27M);
+}
+
+static void anx7625_disable_pd_protocol(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+
+	/* Reset main ocm */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, 0x88, 0x40);
+	/* Disable PD */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AV_STATUS, AP_DISABLE_PD);
+	/* Release main ocm */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, 0x88, 0x00);
+
+	if (ret < 0)
+		DRM_DEV_DEBUG_DRIVER(dev, "disable PD feature fail.\n");
+	else
+		DRM_DEV_DEBUG_DRIVER(dev, "disable PD feature succeeded.\n");
+}
+
+static int anx7625_ocm_loading_check(struct anx7625_data *ctx)
+{
+	int ret;
+	struct device *dev = ctx->dev;
+
+	/* Check interface workable */
+	ret = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client,
+			       FLASH_LOAD_STA);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : access flash load.\n");
+		return ret;
+	}
+	if ((ret & FLASH_LOAD_STA_CHK) != FLASH_LOAD_STA_CHK)
+		return -ENODEV;
+
+	anx7625_disable_pd_protocol(ctx);
+
+	DRM_DEV_DEBUG_DRIVER(dev, "Firmware ver %02x%02x,",
+			     anx7625_reg_read(ctx,
+					      ctx->i2c.rx_p0_client,
+					      OCM_FW_VERSION),
+			     anx7625_reg_read(ctx,
+					      ctx->i2c.rx_p0_client,
+					      OCM_FW_REVERSION));
+	DRM_DEV_DEBUG_DRIVER(dev, "Driver version %s\n",
+			     ANX7625_DRV_VERSION);
+
+	return 0;
+}
+
+static void anx7625_power_on_init(struct anx7625_data *ctx)
+{
+	int retry_count, i;
+
+	for (retry_count = 0; retry_count < 3; retry_count++) {
+		anx7625_power_on(ctx);
+		anx7625_config(ctx);
+
+		for (i = 0; i < OCM_LOADING_TIME; i++) {
+			if (!anx7625_ocm_loading_check(ctx))
+				return;
+			usleep_range(1000, 1100);
+		}
+		anx7625_power_standby(ctx);
+	}
+}
+
+static void anx7625_init_gpio(struct anx7625_data *platform)
+{
+	struct device *dev = platform->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "init gpio\n");
+
+	/* Gpio for chip power enable */
+	platform->pdata.gpio_p_on =
+		devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR_OR_NULL(platform->pdata.gpio_p_on)) {
+		DRM_DEV_DEBUG_DRIVER(dev, "no enable gpio found\n");
+		platform->pdata.gpio_p_on = NULL;
+	}
+
+	/* Gpio for chip reset */
+	platform->pdata.gpio_reset =
+		devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR_OR_NULL(platform->pdata.gpio_reset)) {
+		DRM_DEV_DEBUG_DRIVER(dev, "no reset gpio found\n");
+		platform->pdata.gpio_reset = NULL;
+	}
+
+	if (platform->pdata.gpio_p_on && platform->pdata.gpio_reset) {
+		platform->pdata.low_power_mode = 1;
+		DRM_DEV_DEBUG_DRIVER(dev, "low power mode, pon %d, reset %d.\n",
+				     desc_to_gpio(platform->pdata.gpio_p_on),
+				     desc_to_gpio(platform->pdata.gpio_reset));
+	} else {
+		platform->pdata.low_power_mode = 0;
+		DRM_DEV_DEBUG_DRIVER(dev, "not low power mode.\n");
+	}
+}
+
+static void anx7625_stop_dp_work(struct anx7625_data *ctx)
+{
+	ctx->hpd_status = 0;
+	ctx->hpd_high_cnt = 0;
+}
+
+static void anx7625_start_dp_work(struct anx7625_data *ctx)
+{
+	int ret;
+	struct device *dev = ctx->dev;
+
+	if (ctx->hpd_high_cnt >= 2) {
+		DRM_DEV_DEBUG_DRIVER(dev, "filter useless HPD\n");
+		return;
+	}
+
+	ctx->hpd_status = 1;
+	ctx->hpd_high_cnt++;
+
+	/* Not support HDCP */
+	ret = anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
+
+	/* Try auth flag */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
+	/* Interrupt for DRM */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
+		return;
+	}
+
+	ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
+	if (ret < 0)
+		return;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "Secure OCM version=%02x\n", ret);
+}
+
+static int anx7625_read_hpd_status_p0(struct anx7625_data *ctx)
+{
+	int ret;
+
+	/* Set irq detect window to 2ms */
+	ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+				HPD_DET_TIMER_BIT0_7, HPD_TIME & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+				 HPD_DET_TIMER_BIT8_15,
+				 (HPD_TIME >> 8) & 0xFF);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+				 HPD_DET_TIMER_BIT16_23,
+				 (HPD_TIME >> 16) & 0xFF);
+	if (ret < 0)
+		return ret;
+
+	return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS);
+}
+
+static int _anx7625_hpd_polling(struct anx7625_data *ctx,
+				unsigned long wait_us)
+{
+	int ret, val;
+	struct device *dev = ctx->dev;
+
+	/* Interrupt mode, no need poll HPD status, just return */
+	if (ctx->pdata.intp_irq)
+		return 0;
+
+	ret = readx_poll_timeout(anx7625_read_hpd_status_p0,
+				 ctx, val,
+				 ((val & HPD_STATUS) || (val < 0)),
+				 wait_us / 100,
+				 wait_us);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "no hpd.\n");
+		return ret;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "system status: 0x%x. HPD raise up.\n", val);
+	anx7625_reg_write(ctx, ctx->i2c.tcpc_client,
+			  INTR_ALERT_1, 0xFF);
+	anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+			  INTERFACE_CHANGE_INT, 0);
+
+	anx7625_start_dp_work(ctx);
+
+	if (!ctx->pdata.panel_bridge && ctx->bridge_attached)
+		drm_helper_hpd_irq_event(ctx->bridge.dev);
+
+	return 0;
+}
+
+static int anx7625_wait_hpd_asserted(struct drm_dp_aux *aux,
+				     unsigned long wait_us)
+{
+	struct anx7625_data *ctx = container_of(aux, struct anx7625_data, aux);
+	struct device *dev = ctx->dev;
+	int ret;
+
+	pm_runtime_get_sync(dev);
+	ret = _anx7625_hpd_polling(ctx, wait_us);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static void anx7625_remove_edid(struct anx7625_data *ctx)
+{
+	ctx->slimport_edid_p.edid_block_num = -1;
+}
+
+static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
+{
+	int i;
+
+	for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
+		anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
+				  DP_TX_LANE0_SWING_REG0 + i,
+				  ctx->pdata.lane0_reg_data[i]);
+
+	for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
+		anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
+				  DP_TX_LANE1_SWING_REG0 + i,
+				  ctx->pdata.lane1_reg_data[i]);
+}
+
+static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
+{
+	struct device *dev = ctx->dev;
+
+	/* HPD changed */
+	DRM_DEV_DEBUG_DRIVER(dev, "dp_hpd_change_default_func: %d\n",
+			     (u32)on);
+
+	if (on == 0) {
+		DRM_DEV_DEBUG_DRIVER(dev, " HPD low\n");
+		anx7625_remove_edid(ctx);
+		anx7625_stop_dp_work(ctx);
+	} else {
+		DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
+		anx7625_start_dp_work(ctx);
+		anx7625_dp_adjust_swing(ctx);
+	}
+}
+
+static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
+{
+	int intr_vector, status;
+	struct device *dev = ctx->dev;
+
+	status = anx7625_reg_write(ctx, ctx->i2c.tcpc_client,
+				   INTR_ALERT_1, 0xFF);
+	if (status < 0) {
+		DRM_DEV_ERROR(dev, "cannot clear alert reg.\n");
+		return status;
+	}
+
+	intr_vector = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client,
+				       INTERFACE_CHANGE_INT);
+	if (intr_vector < 0) {
+		DRM_DEV_ERROR(dev, "cannot access interrupt change reg.\n");
+		return intr_vector;
+	}
+	DRM_DEV_DEBUG_DRIVER(dev, "0x7e:0x44=%x\n", intr_vector);
+	status = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				   INTERFACE_CHANGE_INT,
+				   intr_vector & (~intr_vector));
+	if (status < 0) {
+		DRM_DEV_ERROR(dev, "cannot clear interrupt change reg.\n");
+		return status;
+	}
+
+	if (!(intr_vector & HPD_STATUS_CHANGE))
+		return -ENOENT;
+
+	status = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client,
+				  SYSTEM_STSTUS);
+	if (status < 0) {
+		DRM_DEV_ERROR(dev, "cannot clear interrupt status.\n");
+		return status;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "0x7e:0x45=%x\n", status);
+	dp_hpd_change_handler(ctx, status & HPD_STATUS);
+
+	return 0;
+}
+
+static void anx7625_work_func(struct work_struct *work)
+{
+	int event;
+	struct anx7625_data *ctx = container_of(work,
+						struct anx7625_data, work);
+
+	mutex_lock(&ctx->lock);
+
+	if (pm_runtime_suspended(ctx->dev)) {
+		mutex_unlock(&ctx->lock);
+		return;
+	}
+
+	event = anx7625_hpd_change_detect(ctx);
+
+	mutex_unlock(&ctx->lock);
+
+	if (event < 0)
+		return;
+
+	if (ctx->bridge_attached)
+		drm_helper_hpd_irq_event(ctx->bridge.dev);
+}
+
+static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
+{
+	struct anx7625_data *ctx = (struct anx7625_data *)data;
+
+	queue_work(ctx->workqueue, &ctx->work);
+
+	return IRQ_HANDLED;
+}
+
+static int anx7625_get_swing_setting(struct device *dev,
+				     struct anx7625_platform_data *pdata)
+{
+	int num_regs;
+
+	if (of_get_property(dev->of_node,
+			    "analogix,lane0-swing", &num_regs)) {
+		if (num_regs > DP_TX_SWING_REG_CNT)
+			num_regs = DP_TX_SWING_REG_CNT;
+
+		pdata->dp_lane0_swing_reg_cnt = num_regs;
+		of_property_read_u8_array(dev->of_node, "analogix,lane0-swing",
+					  pdata->lane0_reg_data, num_regs);
+	}
+
+	if (of_get_property(dev->of_node,
+			    "analogix,lane1-swing", &num_regs)) {
+		if (num_regs > DP_TX_SWING_REG_CNT)
+			num_regs = DP_TX_SWING_REG_CNT;
+
+		pdata->dp_lane1_swing_reg_cnt = num_regs;
+		of_property_read_u8_array(dev->of_node, "analogix,lane1-swing",
+					  pdata->lane1_reg_data, num_regs);
+	}
+
+	return 0;
+}
+
+static int anx7625_parse_dt(struct device *dev,
+			    struct anx7625_platform_data *pdata)
+{
+	struct device_node *np = dev->of_node, *ep0;
+	int bus_type, mipi_lanes;
+
+	anx7625_get_swing_setting(dev, pdata);
+
+	pdata->is_dpi = 0; /* default dsi mode */
+	of_node_put(pdata->mipi_host_node);
+	pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
+	if (!pdata->mipi_host_node) {
+		DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
+		return -ENODEV;
+	}
+
+	bus_type = 0;
+	mipi_lanes = MAX_LANES_SUPPORT;
+	ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
+	if (ep0) {
+		if (of_property_read_u32(ep0, "bus-type", &bus_type))
+			bus_type = 0;
+
+		mipi_lanes = drm_of_get_data_lanes_count(ep0, 1, MAX_LANES_SUPPORT);
+		of_node_put(ep0);
+	}
+
+	if (bus_type == V4L2_FWNODE_BUS_TYPE_DPI) /* bus type is DPI */
+		pdata->is_dpi = 1;
+
+	pdata->mipi_lanes = MAX_LANES_SUPPORT;
+	if (mipi_lanes > 0)
+		pdata->mipi_lanes = mipi_lanes;
+
+	if (pdata->is_dpi)
+		DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
+	else
+		DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
+
+	if (of_property_read_bool(np, "analogix,audio-enable"))
+		pdata->audio_en = 1;
+
+	return 0;
+}
+
+static int anx7625_parse_dt_panel(struct device *dev,
+				  struct anx7625_platform_data *pdata)
+{
+	struct device_node *np = dev->of_node;
+
+	pdata->panel_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
+	if (IS_ERR(pdata->panel_bridge)) {
+		if (PTR_ERR(pdata->panel_bridge) == -ENODEV) {
+			pdata->panel_bridge = NULL;
+			return 0;
+		}
+
+		return PTR_ERR(pdata->panel_bridge);
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "get panel node.\n");
+
+	return 0;
+}
+
+static bool anx7625_of_panel_on_aux_bus(struct device *dev)
+{
+	struct device_node *bus, *panel;
+
+	bus = of_get_child_by_name(dev->of_node, "aux-bus");
+	if (!bus)
+		return false;
+
+	panel = of_get_child_by_name(bus, "panel");
+	of_node_put(bus);
+	if (!panel)
+		return false;
+	of_node_put(panel);
+
+	return true;
+}
+
+static inline struct anx7625_data *bridge_to_anx7625(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx7625_data, bridge);
+}
+
+static ssize_t anx7625_aux_transfer(struct drm_dp_aux *aux,
+				    struct drm_dp_aux_msg *msg)
+{
+	struct anx7625_data *ctx = container_of(aux, struct anx7625_data, aux);
+	struct device *dev = ctx->dev;
+	u8 request = msg->request & ~DP_AUX_I2C_MOT;
+	int ret = 0;
+
+	mutex_lock(&ctx->aux_lock);
+	pm_runtime_get_sync(dev);
+	msg->reply = 0;
+	switch (request) {
+	case DP_AUX_NATIVE_WRITE:
+	case DP_AUX_I2C_WRITE:
+	case DP_AUX_NATIVE_READ:
+	case DP_AUX_I2C_READ:
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (!ret)
+		ret = anx7625_aux_trans(ctx, msg->request, msg->address,
+					msg->size, msg->buffer);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	mutex_unlock(&ctx->aux_lock);
+
+	return ret;
+}
+
+static struct edid *anx7625_get_edid(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	struct s_edid_data *p_edid = &ctx->slimport_edid_p;
+	int edid_num;
+	u8 *edid;
+
+	edid = kmalloc(FOUR_BLOCK_SIZE, GFP_KERNEL);
+	if (!edid) {
+		DRM_DEV_ERROR(dev, "Fail to allocate buffer\n");
+		return NULL;
+	}
+
+	if (ctx->slimport_edid_p.edid_block_num > 0) {
+		memcpy(edid, ctx->slimport_edid_p.edid_raw_data,
+		       FOUR_BLOCK_SIZE);
+		return (struct edid *)edid;
+	}
+
+	pm_runtime_get_sync(dev);
+	_anx7625_hpd_polling(ctx, 5000 * 100);
+	edid_num = sp_tx_edid_read(ctx, p_edid->edid_raw_data);
+	pm_runtime_put_sync(dev);
+
+	if (edid_num < 1) {
+		DRM_DEV_ERROR(dev, "Fail to read EDID: %d\n", edid_num);
+		kfree(edid);
+		return NULL;
+	}
+
+	p_edid->edid_block_num = edid_num;
+
+	memcpy(edid, ctx->slimport_edid_p.edid_raw_data, FOUR_BLOCK_SIZE);
+	return (struct edid *)edid;
+}
+
+static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
+
+	if (ctx->pdata.panel_bridge)
+		return connector_status_connected;
+
+	return ctx->hpd_status ? connector_status_connected :
+				     connector_status_disconnected;
+}
+
+static int anx7625_audio_hw_params(struct device *dev, void *data,
+				   struct hdmi_codec_daifmt *fmt,
+				   struct hdmi_codec_params *params)
+{
+	struct anx7625_data *ctx = dev_get_drvdata(dev);
+	int wl, ch, rate;
+	int ret = 0;
+
+	if (anx7625_sink_detect(ctx) == connector_status_disconnected) {
+		DRM_DEV_DEBUG_DRIVER(dev, "DP not connected\n");
+		return 0;
+	}
+
+	if (fmt->fmt != HDMI_DSP_A && fmt->fmt != HDMI_I2S) {
+		DRM_DEV_ERROR(dev, "only supports DSP_A & I2S\n");
+		return -EINVAL;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "setting %d Hz, %d bit, %d channels\n",
+			     params->sample_rate, params->sample_width,
+			     params->cea.channels);
+
+	if (fmt->fmt == HDMI_DSP_A)
+		ret = anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+					   AUDIO_CHANNEL_STATUS_6,
+					   ~I2S_SLAVE_MODE,
+					   TDM_SLAVE_MODE);
+	else
+		ret = anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+					   AUDIO_CHANNEL_STATUS_6,
+					   ~TDM_SLAVE_MODE,
+					   I2S_SLAVE_MODE);
+
+	/* Word length */
+	switch (params->sample_width) {
+	case 16:
+		wl = AUDIO_W_LEN_16_20MAX;
+		break;
+	case 18:
+		wl = AUDIO_W_LEN_18_20MAX;
+		break;
+	case 20:
+		wl = AUDIO_W_LEN_20_20MAX;
+		break;
+	case 24:
+		wl = AUDIO_W_LEN_24_24MAX;
+		break;
+	default:
+		DRM_DEV_DEBUG_DRIVER(dev, "wordlength: %d bit not support",
+				     params->sample_width);
+		return -EINVAL;
+	}
+	ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+				    AUDIO_CHANNEL_STATUS_5,
+				    0xf0, wl);
+
+	/* Channel num */
+	switch (params->cea.channels) {
+	case 2:
+		ch = I2S_CH_2;
+		break;
+	case 4:
+		ch = TDM_CH_4;
+		break;
+	case 6:
+		ch = TDM_CH_6;
+		break;
+	case 8:
+		ch = TDM_CH_8;
+		break;
+	default:
+		DRM_DEV_DEBUG_DRIVER(dev, "channel number: %d not support",
+				     params->cea.channels);
+		return -EINVAL;
+	}
+	ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+			       AUDIO_CHANNEL_STATUS_6, 0x1f, ch << 5);
+	if (ch > I2S_CH_2)
+		ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
+				AUDIO_CHANNEL_STATUS_6, AUDIO_LAYOUT);
+	else
+		ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
+				AUDIO_CHANNEL_STATUS_6, ~AUDIO_LAYOUT);
+
+	/* FS */
+	switch (params->sample_rate) {
+	case 32000:
+		rate = AUDIO_FS_32K;
+		break;
+	case 44100:
+		rate = AUDIO_FS_441K;
+		break;
+	case 48000:
+		rate = AUDIO_FS_48K;
+		break;
+	case 88200:
+		rate = AUDIO_FS_882K;
+		break;
+	case 96000:
+		rate = AUDIO_FS_96K;
+		break;
+	case 176400:
+		rate = AUDIO_FS_1764K;
+		break;
+	case 192000:
+		rate = AUDIO_FS_192K;
+		break;
+	default:
+		DRM_DEV_DEBUG_DRIVER(dev, "sample rate: %d not support",
+				     params->sample_rate);
+		return -EINVAL;
+	}
+	ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+				    AUDIO_CHANNEL_STATUS_4,
+				    0xf0, rate);
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+				AP_AV_STATUS, AP_AUDIO_CHG);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : config audio.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void anx7625_audio_shutdown(struct device *dev, void *data)
+{
+	DRM_DEV_DEBUG_DRIVER(dev, "stop audio\n");
+}
+
+static int anx7625_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
+				       struct device_node *endpoint)
+{
+	struct of_endpoint of_ep;
+	int ret;
+
+	ret = of_graph_parse_endpoint(endpoint, &of_ep);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * HDMI sound should be located at external DPI port
+	 * Didn't have good way to check where is internal(DSI)
+	 * or external(DPI) bridge
+	 */
+	return 0;
+}
+
+static void
+anx7625_audio_update_connector_status(struct anx7625_data *ctx,
+				      enum drm_connector_status status)
+{
+	if (ctx->plugged_cb && ctx->codec_dev) {
+		ctx->plugged_cb(ctx->codec_dev,
+				status == connector_status_connected);
+	}
+}
+
+static int anx7625_audio_hook_plugged_cb(struct device *dev, void *data,
+					 hdmi_codec_plugged_cb fn,
+					 struct device *codec_dev)
+{
+	struct anx7625_data *ctx = data;
+
+	ctx->plugged_cb = fn;
+	ctx->codec_dev = codec_dev;
+	anx7625_audio_update_connector_status(ctx, anx7625_sink_detect(ctx));
+
+	return 0;
+}
+
+static int anx7625_audio_get_eld(struct device *dev, void *data,
+				 u8 *buf, size_t len)
+{
+	struct anx7625_data *ctx = dev_get_drvdata(dev);
+
+	if (!ctx->connector) {
+		/* Pass en empty ELD if connector not available */
+		memset(buf, 0, len);
+	} else {
+		dev_dbg(dev, "audio copy eld\n");
+		memcpy(buf, ctx->connector->eld,
+		       min(sizeof(ctx->connector->eld), len));
+	}
+
+	return 0;
+}
+
+static const struct hdmi_codec_ops anx7625_codec_ops = {
+	.hw_params	= anx7625_audio_hw_params,
+	.audio_shutdown = anx7625_audio_shutdown,
+	.get_eld	= anx7625_audio_get_eld,
+	.get_dai_id	= anx7625_hdmi_i2s_get_dai_id,
+	.hook_plugged_cb = anx7625_audio_hook_plugged_cb,
+};
+
+static void anx7625_unregister_audio(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+
+	if (ctx->audio_pdev) {
+		platform_device_unregister(ctx->audio_pdev);
+		ctx->audio_pdev = NULL;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "unbound to %s", HDMI_CODEC_DRV_NAME);
+}
+
+static int anx7625_register_audio(struct device *dev, struct anx7625_data *ctx)
+{
+	struct hdmi_codec_pdata codec_data = {
+		.ops = &anx7625_codec_ops,
+		.max_i2s_channels = 8,
+		.i2s = 1,
+		.data = ctx,
+	};
+
+	ctx->audio_pdev = platform_device_register_data(dev,
+							HDMI_CODEC_DRV_NAME,
+							PLATFORM_DEVID_AUTO,
+							&codec_data,
+							sizeof(codec_data));
+
+	if (IS_ERR(ctx->audio_pdev))
+		return PTR_ERR(ctx->audio_pdev);
+
+	DRM_DEV_DEBUG_DRIVER(dev, "bound to %s", HDMI_CODEC_DRV_NAME);
+
+	return 0;
+}
+
+static int anx7625_setup_dsi_device(struct anx7625_data *ctx)
+{
+	struct mipi_dsi_device *dsi;
+	struct device *dev = ctx->dev;
+	struct mipi_dsi_host *host;
+	const struct mipi_dsi_device_info info = {
+		.type = "anx7625",
+		.channel = 0,
+		.node = NULL,
+	};
+
+	host = of_find_mipi_dsi_host_by_node(ctx->pdata.mipi_host_node);
+	if (!host) {
+		DRM_DEV_ERROR(dev, "fail to find dsi host.\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
+	if (IS_ERR(dsi)) {
+		DRM_DEV_ERROR(dev, "fail to create dsi device.\n");
+		return -EINVAL;
+	}
+
+	dsi->lanes = ctx->pdata.mipi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO	|
+		MIPI_DSI_MODE_VIDEO_SYNC_PULSE	|
+		MIPI_DSI_MODE_VIDEO_HSE	|
+		MIPI_DSI_HS_PKT_END_ALIGNED;
+
+	ctx->dsi = dsi;
+
+	return 0;
+}
+
+static int anx7625_attach_dsi(struct anx7625_data *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "attach dsi\n");
+
+	ret = devm_mipi_dsi_attach(dev, ctx->dsi);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "fail to attach dsi to host.\n");
+		return ret;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "attach dsi succeeded.\n");
+
+	return 0;
+}
+
+static void hdcp_check_work_func(struct work_struct *work)
+{
+	u8 status;
+	struct delayed_work *dwork;
+	struct anx7625_data *ctx;
+	struct device *dev;
+	struct drm_device *drm_dev;
+
+	dwork = to_delayed_work(work);
+	ctx = container_of(dwork, struct anx7625_data, hdcp_work);
+	dev = ctx->dev;
+
+	if (!ctx->connector) {
+		dev_err(dev, "HDCP connector is null!");
+		return;
+	}
+
+	drm_dev = ctx->connector->dev;
+	drm_modeset_lock(&drm_dev->mode_config.connection_mutex, NULL);
+	mutex_lock(&ctx->hdcp_wq_lock);
+
+	status = anx7625_reg_read(ctx, ctx->i2c.tx_p0_client, 0);
+	dev_dbg(dev, "sink HDCP status check: %.02x\n", status);
+	if (status & BIT(1)) {
+		ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_ENABLED;
+		drm_hdcp_update_content_protection(ctx->connector,
+						   ctx->hdcp_cp);
+		dev_dbg(dev, "update CP to ENABLE\n");
+	}
+
+	mutex_unlock(&ctx->hdcp_wq_lock);
+	drm_modeset_unlock(&drm_dev->mode_config.connection_mutex);
+}
+
+static int anx7625_connector_atomic_check(struct anx7625_data *ctx,
+					  struct drm_connector_state *state)
+{
+	struct device *dev = ctx->dev;
+	int cp;
+
+	dev_dbg(dev, "hdcp state check\n");
+	cp = state->content_protection;
+
+	if (cp == ctx->hdcp_cp)
+		return 0;
+
+	if (cp == DRM_MODE_CONTENT_PROTECTION_DESIRED) {
+		if (ctx->dp_en) {
+			dev_dbg(dev, "enable HDCP\n");
+			anx7625_hdcp_enable(ctx);
+
+			queue_delayed_work(ctx->hdcp_workqueue,
+					   &ctx->hdcp_work,
+					   msecs_to_jiffies(2000));
+		}
+	}
+
+	if (cp == DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
+		if (ctx->hdcp_cp != DRM_MODE_CONTENT_PROTECTION_ENABLED) {
+			dev_err(dev, "current CP is not ENABLED\n");
+			return -EINVAL;
+		}
+		anx7625_hdcp_disable(ctx);
+		ctx->hdcp_cp = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
+		drm_hdcp_update_content_protection(ctx->connector,
+						   ctx->hdcp_cp);
+		dev_dbg(dev, "update CP to UNDESIRE\n");
+	}
+
+	if (cp == DRM_MODE_CONTENT_PROTECTION_ENABLED) {
+		dev_err(dev, "Userspace illegal set to PROTECTION ENABLE\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int anx7625_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	int err;
+	struct device *dev = ctx->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm attach\n");
+	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
+		return -EINVAL;
+
+	if (!bridge->encoder) {
+		DRM_DEV_ERROR(dev, "Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	ctx->aux.drm_dev = bridge->dev;
+	err = drm_dp_aux_register(&ctx->aux);
+	if (err) {
+		dev_err(dev, "failed to register aux channel: %d\n", err);
+		return err;
+	}
+
+	if (ctx->pdata.panel_bridge) {
+		err = drm_bridge_attach(bridge->encoder,
+					ctx->pdata.panel_bridge,
+					&ctx->bridge, flags);
+		if (err)
+			return err;
+	}
+
+	ctx->bridge_attached = 1;
+
+	return 0;
+}
+
+static void anx7625_bridge_detach(struct drm_bridge *bridge)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+
+	drm_dp_aux_unregister(&ctx->aux);
+}
+
+static enum drm_mode_status
+anx7625_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_info *info,
+			  const struct drm_display_mode *mode)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm mode checking\n");
+
+	/* Max 1200p at 5.4 Ghz, one lane, pixel clock 300M */
+	if (mode->clock > SUPPORT_PIXEL_CLOCK) {
+		DRM_DEV_DEBUG_DRIVER(dev,
+				     "drm mode invalid, pixelclock too high.\n");
+		return MODE_CLOCK_HIGH;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm mode valid.\n");
+
+	return MODE_OK;
+}
+
+static void anx7625_bridge_mode_set(struct drm_bridge *bridge,
+				    const struct drm_display_mode *old_mode,
+				    const struct drm_display_mode *mode)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm mode set\n");
+
+	ctx->dt.pixelclock.min = mode->clock;
+	ctx->dt.hactive.min = mode->hdisplay;
+	ctx->dt.hsync_len.min = mode->hsync_end - mode->hsync_start;
+	ctx->dt.hfront_porch.min = mode->hsync_start - mode->hdisplay;
+	ctx->dt.hback_porch.min = mode->htotal - mode->hsync_end;
+	ctx->dt.vactive.min = mode->vdisplay;
+	ctx->dt.vsync_len.min = mode->vsync_end - mode->vsync_start;
+	ctx->dt.vfront_porch.min = mode->vsync_start - mode->vdisplay;
+	ctx->dt.vback_porch.min = mode->vtotal - mode->vsync_end;
+
+	ctx->display_timing_valid = 1;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "pixelclock(%d).\n", ctx->dt.pixelclock.min);
+	DRM_DEV_DEBUG_DRIVER(dev, "hactive(%d), hsync(%d), hfp(%d), hbp(%d)\n",
+			     ctx->dt.hactive.min,
+			     ctx->dt.hsync_len.min,
+			     ctx->dt.hfront_porch.min,
+			     ctx->dt.hback_porch.min);
+	DRM_DEV_DEBUG_DRIVER(dev, "vactive(%d), vsync(%d), vfp(%d), vbp(%d)\n",
+			     ctx->dt.vactive.min,
+			     ctx->dt.vsync_len.min,
+			     ctx->dt.vfront_porch.min,
+			     ctx->dt.vback_porch.min);
+	DRM_DEV_DEBUG_DRIVER(dev, "hdisplay(%d),hsync_start(%d).\n",
+			     mode->hdisplay,
+			     mode->hsync_start);
+	DRM_DEV_DEBUG_DRIVER(dev, "hsync_end(%d),htotal(%d).\n",
+			     mode->hsync_end,
+			     mode->htotal);
+	DRM_DEV_DEBUG_DRIVER(dev, "vdisplay(%d),vsync_start(%d).\n",
+			     mode->vdisplay,
+			     mode->vsync_start);
+	DRM_DEV_DEBUG_DRIVER(dev, "vsync_end(%d),vtotal(%d).\n",
+			     mode->vsync_end,
+			     mode->vtotal);
+}
+
+static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adj)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+	u32 hsync, hfp, hbp, hblanking;
+	u32 adj_hsync, adj_hfp, adj_hbp, adj_hblanking, delta_adj;
+	u32 vref, adj_clock;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
+
+	/* No need fixup for external monitor */
+	if (!ctx->pdata.panel_bridge)
+		return true;
+
+	hsync = mode->hsync_end - mode->hsync_start;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	hblanking = mode->htotal - mode->hdisplay;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "before mode fixup\n");
+	DRM_DEV_DEBUG_DRIVER(dev, "hsync(%d), hfp(%d), hbp(%d), clock(%d)\n",
+			     hsync, hfp, hbp, adj->clock);
+	DRM_DEV_DEBUG_DRIVER(dev, "hsync_start(%d), hsync_end(%d), htot(%d)\n",
+			     adj->hsync_start, adj->hsync_end, adj->htotal);
+
+	adj_hfp = hfp;
+	adj_hsync = hsync;
+	adj_hbp = hbp;
+	adj_hblanking = hblanking;
+
+	/* HFP needs to be even */
+	if (hfp & 0x1) {
+		adj_hfp += 1;
+		adj_hblanking += 1;
+	}
+
+	/* HBP needs to be even */
+	if (hbp & 0x1) {
+		adj_hbp -= 1;
+		adj_hblanking -= 1;
+	}
+
+	/* HSYNC needs to be even */
+	if (hsync & 0x1) {
+		if (adj_hblanking < hblanking)
+			adj_hsync += 1;
+		else
+			adj_hsync -= 1;
+	}
+
+	/*
+	 * Once illegal timing detected, use default HFP, HSYNC, HBP
+	 * This adjusting made for built-in eDP panel, for the externel
+	 * DP monitor, may need return false.
+	 */
+	if (hblanking < HBLANKING_MIN || (hfp < HP_MIN && hbp < HP_MIN)) {
+		adj_hsync = SYNC_LEN_DEF;
+		adj_hfp = HFP_HBP_DEF;
+		adj_hbp = HFP_HBP_DEF;
+		vref = adj->clock * 1000 / (adj->htotal * adj->vtotal);
+		if (hblanking < HBLANKING_MIN) {
+			delta_adj = HBLANKING_MIN - hblanking;
+			adj_clock = vref * delta_adj * adj->vtotal;
+			adj->clock += DIV_ROUND_UP(adj_clock, 1000);
+		} else {
+			delta_adj = hblanking - HBLANKING_MIN;
+			adj_clock = vref * delta_adj * adj->vtotal;
+			adj->clock -= DIV_ROUND_UP(adj_clock, 1000);
+		}
+
+		DRM_WARN("illegal hblanking timing, use default.\n");
+		DRM_WARN("hfp(%d), hbp(%d), hsync(%d).\n", hfp, hbp, hsync);
+	} else if (adj_hfp < HP_MIN) {
+		/* Adjust hfp if hfp less than HP_MIN */
+		delta_adj = HP_MIN - adj_hfp;
+		adj_hfp = HP_MIN;
+
+		/*
+		 * Balance total HBlanking pixel, if HBP does not have enough
+		 * space, adjust HSYNC length, otherwise adjust HBP
+		 */
+		if ((adj_hbp - delta_adj) < HP_MIN)
+			/* HBP not enough space */
+			adj_hsync -= delta_adj;
+		else
+			adj_hbp -= delta_adj;
+	} else if (adj_hbp < HP_MIN) {
+		delta_adj = HP_MIN - adj_hbp;
+		adj_hbp = HP_MIN;
+
+		/*
+		 * Balance total HBlanking pixel, if HBP hasn't enough space,
+		 * adjust HSYNC length, otherwize adjust HBP
+		 */
+		if ((adj_hfp - delta_adj) < HP_MIN)
+			/* HFP not enough space */
+			adj_hsync -= delta_adj;
+		else
+			adj_hfp -= delta_adj;
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "after mode fixup\n");
+	DRM_DEV_DEBUG_DRIVER(dev, "hsync(%d), hfp(%d), hbp(%d), clock(%d)\n",
+			     adj_hsync, adj_hfp, adj_hbp, adj->clock);
+
+	/* Reconstruct timing */
+	adj->hsync_start = adj->hdisplay + adj_hfp;
+	adj->hsync_end = adj->hsync_start + adj_hsync;
+	adj->htotal = adj->hsync_end + adj_hbp;
+	DRM_DEV_DEBUG_DRIVER(dev, "hsync_start(%d), hsync_end(%d), htot(%d)\n",
+			     adj->hsync_start, adj->hsync_end, adj->htotal);
+
+	return true;
+}
+
+static int anx7625_bridge_atomic_check(struct drm_bridge *bridge,
+				       struct drm_bridge_state *bridge_state,
+				       struct drm_crtc_state *crtc_state,
+				       struct drm_connector_state *conn_state)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+
+	dev_dbg(dev, "drm bridge atomic check\n");
+
+	anx7625_bridge_mode_fixup(bridge, &crtc_state->mode,
+				  &crtc_state->adjusted_mode);
+
+	return anx7625_connector_atomic_check(ctx, conn_state);
+}
+
+static void anx7625_bridge_atomic_enable(struct drm_bridge *bridge,
+					 struct drm_bridge_state *state)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+	struct drm_connector *connector;
+
+	dev_dbg(dev, "drm atomic enable\n");
+
+	if (!bridge->encoder) {
+		dev_err(dev, "Parent encoder object not found");
+		return;
+	}
+
+	connector = drm_atomic_get_new_connector_for_encoder(state->base.state,
+							     bridge->encoder);
+	if (!connector)
+		return;
+
+	ctx->connector = connector;
+
+	pm_runtime_get_sync(dev);
+	_anx7625_hpd_polling(ctx, 5000 * 100);
+
+	anx7625_dp_start(ctx);
+}
+
+static void anx7625_bridge_atomic_disable(struct drm_bridge *bridge,
+					  struct drm_bridge_state *old)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+
+	dev_dbg(dev, "drm atomic disable\n");
+
+	ctx->connector = NULL;
+	anx7625_dp_stop(ctx);
+
+	mutex_lock(&ctx->aux_lock);
+	pm_runtime_put_sync_suspend(dev);
+	mutex_unlock(&ctx->aux_lock);
+}
+
+static enum drm_connector_status
+anx7625_bridge_detect(struct drm_bridge *bridge)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm bridge detect\n");
+
+	return anx7625_sink_detect(ctx);
+}
+
+static struct edid *anx7625_bridge_get_edid(struct drm_bridge *bridge,
+					    struct drm_connector *connector)
+{
+	struct anx7625_data *ctx = bridge_to_anx7625(bridge);
+	struct device *dev = ctx->dev;
+
+	DRM_DEV_DEBUG_DRIVER(dev, "drm bridge get edid\n");
+
+	return anx7625_get_edid(ctx);
+}
+
+static const struct drm_bridge_funcs anx7625_bridge_funcs = {
+	.attach = anx7625_bridge_attach,
+	.detach = anx7625_bridge_detach,
+	.mode_valid = anx7625_bridge_mode_valid,
+	.mode_set = anx7625_bridge_mode_set,
+	.atomic_check = anx7625_bridge_atomic_check,
+	.atomic_enable = anx7625_bridge_atomic_enable,
+	.atomic_disable = anx7625_bridge_atomic_disable,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+	.detect = anx7625_bridge_detect,
+	.get_edid = anx7625_bridge_get_edid,
+};
+
+static int anx7625_register_i2c_dummy_clients(struct anx7625_data *ctx,
+					      struct i2c_client *client)
+{
+	struct device *dev = ctx->dev;
+
+	ctx->i2c.tx_p0_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							  TX_P0_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.tx_p0_client))
+		return PTR_ERR(ctx->i2c.tx_p0_client);
+
+	ctx->i2c.tx_p1_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							  TX_P1_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.tx_p1_client))
+		return PTR_ERR(ctx->i2c.tx_p1_client);
+
+	ctx->i2c.tx_p2_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							  TX_P2_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.tx_p2_client))
+		return PTR_ERR(ctx->i2c.tx_p2_client);
+
+	ctx->i2c.rx_p0_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							  RX_P0_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.rx_p0_client))
+		return PTR_ERR(ctx->i2c.rx_p0_client);
+
+	ctx->i2c.rx_p1_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							  RX_P1_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.rx_p1_client))
+		return PTR_ERR(ctx->i2c.rx_p1_client);
+
+	ctx->i2c.rx_p2_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							  RX_P2_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.rx_p2_client))
+		return PTR_ERR(ctx->i2c.rx_p2_client);
+
+	ctx->i2c.tcpc_client = devm_i2c_new_dummy_device(dev, client->adapter,
+							 TCPC_INTERFACE_ADDR >> 1);
+	if (IS_ERR(ctx->i2c.tcpc_client))
+		return PTR_ERR(ctx->i2c.tcpc_client);
+
+	return 0;
+}
+
+static int __maybe_unused anx7625_runtime_pm_suspend(struct device *dev)
+{
+	struct anx7625_data *ctx = dev_get_drvdata(dev);
+
+	mutex_lock(&ctx->lock);
+
+	anx7625_stop_dp_work(ctx);
+	anx7625_power_standby(ctx);
+
+	mutex_unlock(&ctx->lock);
+
+	return 0;
+}
+
+static int __maybe_unused anx7625_runtime_pm_resume(struct device *dev)
+{
+	struct anx7625_data *ctx = dev_get_drvdata(dev);
+
+	mutex_lock(&ctx->lock);
+
+	anx7625_power_on_init(ctx);
+
+	mutex_unlock(&ctx->lock);
+
+	return 0;
+}
+
+static const struct dev_pm_ops anx7625_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(anx7625_runtime_pm_suspend,
+			   anx7625_runtime_pm_resume, NULL)
+};
+
+static void anx7625_runtime_disable(void *data)
+{
+	pm_runtime_dont_use_autosuspend(data);
+	pm_runtime_disable(data);
+}
+
+static int anx7625_link_bridge(struct drm_dp_aux *aux)
+{
+	struct anx7625_data *platform = container_of(aux, struct anx7625_data, aux);
+	struct device *dev = aux->dev;
+	int ret;
+
+	ret = anx7625_parse_dt_panel(dev, &platform->pdata);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "fail to parse DT for panel : %d\n", ret);
+		return ret;
+	}
+
+	platform->bridge.funcs = &anx7625_bridge_funcs;
+	platform->bridge.of_node = dev->of_node;
+	if (!anx7625_of_panel_on_aux_bus(dev))
+		platform->bridge.ops |= DRM_BRIDGE_OP_EDID;
+	if (!platform->pdata.panel_bridge)
+		platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
+					DRM_BRIDGE_OP_DETECT;
+	platform->bridge.type = platform->pdata.panel_bridge ?
+				    DRM_MODE_CONNECTOR_eDP :
+				    DRM_MODE_CONNECTOR_DisplayPort;
+
+	drm_bridge_add(&platform->bridge);
+
+	if (!platform->pdata.is_dpi) {
+		ret = anx7625_attach_dsi(platform);
+		if (ret)
+			drm_bridge_remove(&platform->bridge);
+	}
+
+	return ret;
+}
+
+static int anx7625_i2c_probe(struct i2c_client *client)
+{
+	struct anx7625_data *platform;
+	struct anx7625_platform_data *pdata;
+	int ret = 0;
+	struct device *dev = &client->dev;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		DRM_DEV_ERROR(dev, "anx7625's i2c bus doesn't support\n");
+		return -ENODEV;
+	}
+
+	platform = devm_kzalloc(dev, sizeof(*platform), GFP_KERNEL);
+	if (!platform) {
+		DRM_DEV_ERROR(dev, "fail to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	pdata = &platform->pdata;
+
+	platform->dev = &client->dev;
+	i2c_set_clientdata(client, platform);
+
+	pdata->supplies[0].supply = "vdd10";
+	pdata->supplies[1].supply = "vdd18";
+	pdata->supplies[2].supply = "vdd33";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
+				      pdata->supplies);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
+		return ret;
+	}
+	anx7625_init_gpio(platform);
+
+	mutex_init(&platform->lock);
+	mutex_init(&platform->hdcp_wq_lock);
+	mutex_init(&platform->aux_lock);
+
+	INIT_DELAYED_WORK(&platform->hdcp_work, hdcp_check_work_func);
+	platform->hdcp_workqueue = create_workqueue("hdcp workqueue");
+	if (!platform->hdcp_workqueue) {
+		dev_err(dev, "fail to create work queue\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	platform->pdata.intp_irq = client->irq;
+	if (platform->pdata.intp_irq) {
+		INIT_WORK(&platform->work, anx7625_work_func);
+		platform->workqueue = alloc_workqueue("anx7625_work",
+						      WQ_FREEZABLE | WQ_MEM_RECLAIM, 1);
+		if (!platform->workqueue) {
+			DRM_DEV_ERROR(dev, "fail to create work queue\n");
+			ret = -ENOMEM;
+			goto free_hdcp_wq;
+		}
+
+		ret = devm_request_threaded_irq(dev, platform->pdata.intp_irq,
+						NULL, anx7625_intr_hpd_isr,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						"anx7625-intp", platform);
+		if (ret) {
+			DRM_DEV_ERROR(dev, "fail to request irq\n");
+			goto free_wq;
+		}
+	}
+
+	platform->aux.name = "anx7625-aux";
+	platform->aux.dev = dev;
+	platform->aux.transfer = anx7625_aux_transfer;
+	platform->aux.wait_hpd_asserted = anx7625_wait_hpd_asserted;
+	drm_dp_aux_init(&platform->aux);
+
+	ret = anx7625_parse_dt(dev, pdata);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dev, "fail to parse DT : %d\n", ret);
+		goto free_wq;
+	}
+
+	if (!platform->pdata.is_dpi) {
+		ret = anx7625_setup_dsi_device(platform);
+		if (ret < 0)
+			goto free_wq;
+	}
+
+	/*
+	 * Registering the i2c devices will retrigger deferred probe, so it
+	 * needs to be done after calls that might return EPROBE_DEFER,
+	 * otherwise we can get an infinite loop.
+	 */
+	if (anx7625_register_i2c_dummy_clients(platform, client) != 0) {
+		ret = -ENOMEM;
+		DRM_DEV_ERROR(dev, "fail to reserve I2C bus.\n");
+		goto free_wq;
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
+	pm_suspend_ignore_children(dev, true);
+	ret = devm_add_action_or_reset(dev, anx7625_runtime_disable, dev);
+	if (ret)
+		goto free_wq;
+
+	/*
+	 * Populating the aux bus will retrigger deferred probe, so it needs to
+	 * be done after calls that might return EPROBE_DEFER, otherwise we can
+	 * get an infinite loop.
+	 */
+	ret = devm_of_dp_aux_populate_bus(&platform->aux, anx7625_link_bridge);
+	if (ret) {
+		if (ret != -ENODEV) {
+			DRM_DEV_ERROR(dev, "failed to populate aux bus : %d\n", ret);
+			goto free_wq;
+		}
+
+		ret = anx7625_link_bridge(&platform->aux);
+		if (ret)
+			goto free_wq;
+	}
+
+	if (!platform->pdata.low_power_mode) {
+		anx7625_disable_pd_protocol(platform);
+		pm_runtime_get_sync(dev);
+		_anx7625_hpd_polling(platform, 5000 * 100);
+	}
+
+	/* Add work function */
+	if (platform->pdata.intp_irq)
+		queue_work(platform->workqueue, &platform->work);
+
+	if (platform->pdata.audio_en)
+		anx7625_register_audio(dev, platform);
+
+	DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
+
+	return 0;
+
+free_wq:
+	if (platform->workqueue)
+		destroy_workqueue(platform->workqueue);
+
+free_hdcp_wq:
+	if (platform->hdcp_workqueue)
+		destroy_workqueue(platform->hdcp_workqueue);
+
+	return ret;
+}
+
+static void anx7625_i2c_remove(struct i2c_client *client)
+{
+	struct anx7625_data *platform = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&platform->bridge);
+
+	if (platform->pdata.intp_irq)
+		destroy_workqueue(platform->workqueue);
+
+	if (platform->hdcp_workqueue) {
+		cancel_delayed_work(&platform->hdcp_work);
+		flush_workqueue(platform->hdcp_workqueue);
+		destroy_workqueue(platform->hdcp_workqueue);
+	}
+
+	if (!platform->pdata.low_power_mode)
+		pm_runtime_put_sync_suspend(&client->dev);
+
+	if (platform->pdata.audio_en)
+		anx7625_unregister_audio(platform);
+}
+
+static const struct i2c_device_id anx7625_id[] = {
+	{"anx7625", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, anx7625_id);
+
+static const struct of_device_id anx_match_table[] = {
+	{.compatible = "analogix,anx7625",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, anx_match_table);
+
+static struct i2c_driver anx7625_driver = {
+	.driver = {
+		.name = "anx7625",
+		.of_match_table = anx_match_table,
+		.pm = &anx7625_pm_ops,
+	},
+	.probe = anx7625_i2c_probe,
+	.remove = anx7625_i2c_remove,
+
+	.id_table = anx7625_id,
+};
+
+module_i2c_driver(anx7625_driver);
+
+MODULE_DESCRIPTION("MIPI2DP anx7625 driver");
+MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(ANX7625_DRV_VERSION);
-- 
cgit v1.2.3