From 34996e42f82bfd60bc2c191e5cae3c6ab233ec6c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:11:27 +0200 Subject: Merging upstream version 6.9.7. Signed-off-by: Daniel Baumann --- drivers/gpu/drm/panel/panel-novatek-nt35510.c | 424 ++++++++++++++++++++++---- 1 file changed, 367 insertions(+), 57 deletions(-) (limited to 'drivers/gpu/drm/panel/panel-novatek-nt35510.c') diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c index 83a9cf53d2..d3bfdfc9cf 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c @@ -36,6 +36,9 @@ #include #include +#define NT35510_CMD_CORRECT_GAMMA BIT(0) +#define NT35510_CMD_CONTROL_DISPLAY BIT(1) + #define MCS_CMD_MAUCCTR 0xF0 /* Manufacturer command enable */ #define MCS_CMD_READ_ID1 0xDA #define MCS_CMD_READ_ID2 0xDB @@ -112,18 +115,33 @@ /* AVDD and AVEE setting 3 bytes */ #define NT35510_P1_AVDD_LEN 3 #define NT35510_P1_AVEE_LEN 3 +#define NT35510_P1_VCL_LEN 3 #define NT35510_P1_VGH_LEN 3 #define NT35510_P1_VGL_LEN 3 #define NT35510_P1_VGP_LEN 3 #define NT35510_P1_VGN_LEN 3 +#define NT35510_P1_VCMOFF_LEN 2 /* BT1CTR thru BT5CTR setting 3 bytes */ #define NT35510_P1_BT1CTR_LEN 3 #define NT35510_P1_BT2CTR_LEN 3 +#define NT35510_P1_BT3CTR_LEN 3 #define NT35510_P1_BT4CTR_LEN 3 #define NT35510_P1_BT5CTR_LEN 3 /* 52 gamma parameters times two per color: positive and negative */ #define NT35510_P1_GAMMA_LEN 52 +#define NT35510_WRCTRLD_BCTRL BIT(5) +#define NT35510_WRCTRLD_A BIT(4) +#define NT35510_WRCTRLD_DD BIT(3) +#define NT35510_WRCTRLD_BL BIT(2) +#define NT35510_WRCTRLD_DB BIT(1) +#define NT35510_WRCTRLD_G BIT(0) + +#define NT35510_WRCABC_OFF 0 +#define NT35510_WRCABC_UI_MODE 1 +#define NT35510_WRCABC_STILL_MODE 2 +#define NT35510_WRCABC_MOVING_MODE 3 + /** * struct nt35510_config - the display-specific NT35510 configuration * @@ -171,6 +189,14 @@ struct nt35510_config { * timing in the display controller. */ const struct drm_display_mode mode; + /** + * @mode_flags: DSI operation mode related flags + */ + unsigned long mode_flags; + /** + * @cmds: enable DSI commands + */ + u32 cmds; /** * @avdd: setting for AVDD ranging from 0x00 = 6.5V to 0x14 = 4.5V * in 0.1V steps the default is 0x05 which means 6.0V @@ -220,6 +246,25 @@ struct nt35510_config { * The defaults are 4 and 3 yielding 0x34 */ u8 bt2ctr[NT35510_P1_BT2CTR_LEN]; + /** + * @vcl: setting for VCL ranging from 0x00 = -2.5V to 0x11 = -4.0V + * in 1V steps, the default is 0x00 which means -2.5V + */ + u8 vcl[NT35510_P1_VCL_LEN]; + /** + * @bt3ctr: setting for boost power control for the VCL step-up + * circuit (3) + * bits 0..2 in the lower nibble controls CLCK, the booster clock + * frequency, the values are the same as for PCK in @bt1ctr. + * bits 4..5 in the upper nibble controls BTCL, the boosting + * amplification for the step-up circuit. + * 0 = Disable + * 1 = -0.5 x VDDB + * 2 = -1 x VDDB + * 3 = -2 x VDDB + * The defaults are 4 and 2 yielding 0x24 + */ + u8 bt3ctr[NT35510_P1_BT3CTR_LEN]; /** * @vgh: setting for VGH ranging from 0x00 = 7.0V to 0x0B = 18.0V * in 1V steps, the default is 0x08 which means 15V @@ -273,6 +318,113 @@ struct nt35510_config { * same layout of bytes as @vgp. */ u8 vgn[NT35510_P1_VGN_LEN]; + /** + * @vcmoff: setting the DC VCOM offset voltage + * The first byte contains bit 8 of VCM in bit 0 and VCMOFFSEL in bit 4. + * The second byte contains bits 0..7 of VCM. + * VCMOFFSEL the common voltage offset mode. + * VCMOFFSEL 0x00 = VCOM .. 0x01 Gamma. + * The default is 0x00. + * VCM the VCOM output voltage (VCMOFFSEL = 0) or the internal register + * offset for gamma voltage (VCMOFFSEL = 1). + * VCM 0x00 = 0V/0 .. 0x118 = 3.5V/280 in steps of 12.5mV/1step + * The default is 0x00 = 0V/0. + */ + u8 vcmoff[NT35510_P1_VCMOFF_LEN]; + /** + * @dopctr: setting optional control for display + * ERR bits 0..1 in the first byte is the ERR pin output signal setting. + * 0 = Disable, ERR pin output low + * 1 = ERR pin output CRC error only + * 2 = ERR pin output ECC error only + * 3 = ERR pin output CRC and ECC error + * The default is 0. + * N565 bit 2 in the first byte is the 16-bit/pixel format selection. + * 0 = R[4:0] + G[5:3] & G[2:0] + B[4:0] + * 1 = G[2:0] + R[4:0] & B[4:0] + G[5:3] + * The default is 0. + * DIS_EoTP_HS bit 3 in the first byte is "DSI protocol violation" error + * reporting. + * 0 = reporting when error + * 1 = not reporting when error + * DSIM bit 4 in the first byte is the video mode data type enable + * 0 = Video mode data type disable + * 1 = Video mode data type enable + * The default is 0. + * DSIG bit 5 int the first byte is the generic r/w data type enable + * 0 = Generic r/w disable + * 1 = Generic r/w enable + * The default is 0. + * DSITE bit 6 in the first byte is TE line enable + * 0 = TE line is disabled + * 1 = TE line is enabled + * The default is 0. + * RAMKP bit 7 in the first byte is the frame memory keep/loss in + * sleep-in mode + * 0 = contents loss in sleep-in + * 1 = contents keep in sleep-in + * The default is 0. + * CRL bit 1 in the second byte is the source driver data shift + * direction selection. This bit is XOR operation with bit RSMX + * of 3600h command. + * 0 (RMSX = 0) = S1 -> S1440 + * 0 (RMSX = 1) = S1440 -> S1 + * 1 (RMSX = 0) = S1440 -> S1 + * 1 (RMSX = 1) = S1 -> S1440 + * The default is 0. + * CTB bit 2 in the second byte is the vertical scanning direction + * selection for gate control signals. This bit is XOR operation + * with bit ML of 3600h command. + * 0 (ML = 0) = Forward (top -> bottom) + * 0 (ML = 1) = Reverse (bottom -> top) + * 1 (ML = 0) = Reverse (bottom -> top) + * 1 (ML = 1) = Forward (top -> bottom) + * The default is 0. + * CRGB bit 3 in the second byte is RGB-BGR order selection. This + * bit is XOR operation with bit RGB of 3600h command. + * 0 (RGB = 0) = RGB/Normal + * 0 (RGB = 1) = BGR/RB swap + * 1 (RGB = 0) = BGR/RB swap + * 1 (RGB = 1) = RGB/Normal + * The default is 0. + * TE_PWR_SEL bit 4 in the second byte is the TE output voltage + * level selection (only valid when DSTB_SEL = 0 or DSTB_SEL = 1, + * VSEL = High and VDDI = 1.665~3.3V). + * 0 = TE output voltage level is VDDI + * 1 = TE output voltage level is VDDA + * The default is 0. + */ + u8 dopctr[NT35510_P0_DOPCTR_LEN]; + /** + * @madctl: Memory data access control + * RSMY bit 0 is flip vertical. Flips the display image top to down. + * RSMX bit 1 is flip horizontal. Flips the display image left to right. + * MH bit 2 is the horizontal refresh order. + * RGB bit 3 is the RGB-BGR order. + * 0 = RGB color sequence + * 1 = BGR color sequence + * ML bit 4 is the vertical refresh order. + * MV bit 5 is the row/column exchange. + * MX bit 6 is the column address order. + * MY bit 7 is the row address order. + */ + u8 madctl; + /** + * @sdhdtctr: source output data hold time + * 0x00..0x3F = 0..31.5us in steps of 0.5us + * The default is 0x05 = 2.5us. + */ + u8 sdhdtctr; + /** + * @gseqctr: EQ control for gate signals + * GFEQ_XX[3:0]: time setting of EQ step for falling edge in steps + * of 0.5us. + * The default is 0x07 = 3.5us + * GREQ_XX[7:4]: time setting of EQ step for rising edge in steps + * of 0.5us. + * The default is 0x07 = 3.5us + */ + u8 gseqctr[NT35510_P0_GSEQCTR_LEN]; /** * @sdeqctr: Source driver control settings, first byte is * 0 for mode 1 and 1 for mode 2. Mode 1 uses two steps and @@ -343,6 +495,43 @@ struct nt35510_config { * @gamma_corr_neg_b: Blue gamma correction parameters, negative */ u8 gamma_corr_neg_b[NT35510_P1_GAMMA_LEN]; + /** + * @wrdisbv: write display brightness + * 0x00 value means the lowest brightness and 0xff value means + * the highest brightness. + * The default is 0x00. + */ + u8 wrdisbv; + /** + * @wrctrld: write control display + * G bit 0 selects gamma curve: 0 = Manual, 1 = Automatic + * DB bit 1 selects display brightness: 0 = Manual, 1 = Automatic + * BL bit 2 controls backlight control: 0 = Off, 1 = On + * DD bit 3 controls display dimming: 0 = Off, 1 = On + * A bit 4 controls LABC block: 0 = Off, 1 = On + * BCTRL bit 5 controls brightness block: 0 = Off, 1 = On + */ + u8 wrctrld; + /** + * @wrcabc: write content adaptive brightness control + * There is possible to use 4 different modes for content adaptive + * image functionality: + * 0: Off + * 1: User Interface Image (UI-Mode) + * 2: Still Picture Image (Still-Mode) + * 3: Moving Picture Image (Moving-Mode) + * The default is 0 + */ + u8 wrcabc; + /** + * @wrcabcmb: write CABC minimum brightness + * Set the minimum brightness value of the display for CABC + * function. + * 0x00 value means the lowest brightness for CABC and 0xff + * value means the highest brightness for CABC. + * The default is 0x00. + */ + u8 wrcabcmb; }; /** @@ -486,6 +675,16 @@ static int nt35510_setup_power(struct nt35510 *nt) nt->conf->bt2ctr); if (ret) return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVCL, + NT35510_P1_VCL_LEN, + nt->conf->vcl); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT3CTR, + NT35510_P1_BT3CTR_LEN, + nt->conf->bt3ctr); + if (ret) + return ret; ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGH, NT35510_P1_VGH_LEN, nt->conf->vgh); @@ -522,6 +721,12 @@ static int nt35510_setup_power(struct nt35510 *nt) if (ret) return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVCMOFF, + NT35510_P1_VCMOFF_LEN, + nt->conf->vcmoff); + if (ret) + return ret; + /* Typically 10 ms */ usleep_range(10000, 20000); @@ -536,46 +741,28 @@ static int nt35510_setup_display(struct nt35510 *nt) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev); const struct nt35510_config *conf = nt->conf; - u8 dopctr[NT35510_P0_DOPCTR_LEN]; - u8 gseqctr[NT35510_P0_GSEQCTR_LEN]; u8 dpfrctr[NT35510_P0_DPFRCTR1_LEN]; - /* FIXME: set up any rotation (assume none for now) */ - u8 addr_mode = NT35510_ROTATE_0_SETTING; - u8 val; int ret; - /* Enable TE, EoTP and RGB pixel format */ - dopctr[0] = NT35510_DOPCTR_0_DSITE | NT35510_DOPCTR_0_EOTP | - NT35510_DOPCTR_0_N565; - dopctr[1] = NT35510_DOPCTR_1_CTB; ret = nt35510_send_long(nt, dsi, NT35510_P0_DOPCTR, NT35510_P0_DOPCTR_LEN, - dopctr); + conf->dopctr); if (ret) return ret; - ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &addr_mode, - sizeof(addr_mode)); + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &conf->madctl, + sizeof(conf->madctl)); if (ret < 0) return ret; - /* - * Source data hold time, default 0x05 = 2.5us - * 0x00..0x3F = 0 .. 31.5us in steps of 0.5us - * 0x0A = 5us - */ - val = 0x0A; - ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDHDTCTR, &val, - sizeof(val)); + ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDHDTCTR, &conf->sdhdtctr, + sizeof(conf->sdhdtctr)); if (ret < 0) return ret; - /* EQ control for gate signals, 0x00 = 0 us */ - gseqctr[0] = 0x00; - gseqctr[1] = 0x00; ret = nt35510_send_long(nt, dsi, NT35510_P0_GSEQCTR, NT35510_P0_GSEQCTR_LEN, - gseqctr); + conf->gseqctr); if (ret) return ret; @@ -719,36 +906,38 @@ static int nt35510_power_on(struct nt35510 *nt) if (ret) return ret; - ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_POS, - NT35510_P1_GAMMA_LEN, - nt->conf->gamma_corr_pos_r); - if (ret) - return ret; - ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_POS, - NT35510_P1_GAMMA_LEN, - nt->conf->gamma_corr_pos_g); - if (ret) - return ret; - ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_POS, - NT35510_P1_GAMMA_LEN, - nt->conf->gamma_corr_pos_b); - if (ret) - return ret; - ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_NEG, - NT35510_P1_GAMMA_LEN, - nt->conf->gamma_corr_neg_r); - if (ret) - return ret; - ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_NEG, - NT35510_P1_GAMMA_LEN, - nt->conf->gamma_corr_neg_g); - if (ret) - return ret; - ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_NEG, - NT35510_P1_GAMMA_LEN, - nt->conf->gamma_corr_neg_b); - if (ret) - return ret; + if (nt->conf->cmds & NT35510_CMD_CORRECT_GAMMA) { + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_POS, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_pos_r); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_POS, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_pos_g); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_POS, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_pos_b); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_NEG, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_neg_r); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_NEG, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_neg_g); + if (ret) + return ret; + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_NEG, + NT35510_P1_GAMMA_LEN, + nt->conf->gamma_corr_neg_b); + if (ret) + return ret; + } /* Set up stuff in manufacturer control, page 0 */ ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR, @@ -827,6 +1016,26 @@ static int nt35510_prepare(struct drm_panel *panel) /* Up to 120 ms */ usleep_range(120000, 150000); + if (nt->conf->cmds & NT35510_CMD_CONTROL_DISPLAY) { + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, + &nt->conf->wrctrld, + sizeof(nt->conf->wrctrld)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_POWER_SAVE, + &nt->conf->wrcabc, + sizeof(nt->conf->wrcabc)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_CABC_MIN_BRIGHTNESS, + &nt->conf->wrcabcmb, + sizeof(nt->conf->wrcabcmb)); + if (ret < 0) + return ret; + } + ret = mipi_dsi_dcs_set_display_on(dsi); if (ret) { dev_err(nt->dev, "failed to turn display on (%d)\n", ret); @@ -896,7 +1105,6 @@ static int nt35510_probe(struct mipi_dsi_device *dsi) */ dsi->hs_rate = 349440000; dsi->lp_rate = 9600000; - dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS; /* * Every new incarnation of this display must have a unique @@ -908,6 +1116,8 @@ static int nt35510_probe(struct mipi_dsi_device *dsi) return -ENODEV; } + dsi->mode_flags = nt->conf->mode_flags; + nt->supplies[0].supply = "vdd"; /* 2.3-4.8 V */ nt->supplies[1].supply = "vddi"; /* 1.65-3.3V */ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->supplies), @@ -923,7 +1133,7 @@ static int nt35510_probe(struct mipi_dsi_device *dsi) if (ret) return ret; - nt->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); + nt->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(nt->reset_gpio)) { dev_err(dev, "error getting RESET GPIO\n"); return PTR_ERR(nt->reset_gpio); @@ -952,7 +1162,10 @@ static int nt35510_probe(struct mipi_dsi_device *dsi) return PTR_ERR(bl); } bl->props.max_brightness = 255; - bl->props.brightness = 255; + if (nt->conf->cmds & NT35510_CMD_CONTROL_DISPLAY) + bl->props.brightness = nt->conf->wrdisbv; + else + bl->props.brightness = 255; bl->props.power = FB_BLANK_POWERDOWN; nt->panel.backlight = bl; } @@ -1030,6 +1243,8 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = { .vtotal = 800 + 2 + 0 + 5, /* VBP = 5 */ .flags = 0, }, + .mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS, + .cmds = NT35510_CMD_CORRECT_GAMMA, /* 0x09: AVDD = 5.6V */ .avdd = { 0x09, 0x09, 0x09 }, /* 0x34: PCK = Hsync/2, BTP = 2 x VDDB */ @@ -1038,6 +1253,10 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = { .avee = { 0x09, 0x09, 0x09 }, /* 0x24: NCK = Hsync/2, BTN = -2 x VDDB */ .bt2ctr = { 0x24, 0x24, 0x24 }, + /* VBCLA: -2.5V, VBCLB: -2.5V, VBCLC: -2.5V */ + .vcl = { 0x00, 0x00, 0x00 }, + /* 0x24: CLCK = Hsync/2, BTN = -1 x VDDB */ + .bt3ctr = { 0x24, 0x24, 0x24 }, /* 0x05 = 12V */ .vgh = { 0x05, 0x05, 0x05 }, /* 0x24: NCKA = Hsync/2, VGH = 2 x AVDD - AVEE */ @@ -1050,6 +1269,16 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = { .vgp = { 0x00, 0xA3, 0x00 }, /* VGMP: 0x0A3 = 5.0375V, VGSP = 0V */ .vgn = { 0x00, 0xA3, 0x00 }, + /* VCMOFFSEL = VCOM voltage offset mode, VCM = 0V */ + .vcmoff = { 0x00, 0x00 }, + /* Enable TE, EoTP and RGB pixel format */ + .dopctr = { NT35510_DOPCTR_0_DSITE | NT35510_DOPCTR_0_EOTP | + NT35510_DOPCTR_0_N565, NT35510_DOPCTR_1_CTB }, + .madctl = NT35510_ROTATE_0_SETTING, + /* 0x0A: SDT = 5 us */ + .sdhdtctr = 0x0A, + /* EQ control for gate signals, 0x00 = 0 us */ + .gseqctr = { 0x00, 0x00 }, /* SDEQCTR: source driver EQ mode 2, 2.5 us rise time on each step */ .sdeqctr = { 0x01, 0x05, 0x05, 0x05 }, /* SDVPCTR: Normal operation off color during v porch */ @@ -1073,7 +1302,88 @@ static const struct nt35510_config nt35510_hydis_hva40wv1 = { .gamma_corr_neg_b = { NT35510_GAMMA_NEG_DEFAULT }, }; +static const struct nt35510_config nt35510_frida_frd400b25025 = { + .width_mm = 52, + .height_mm = 86, + .mode = { + .clock = 23000, + .hdisplay = 480, + .hsync_start = 480 + 34, /* HFP = 34 */ + .hsync_end = 480 + 34 + 2, /* HSync = 2 */ + .htotal = 480 + 34 + 2 + 34, /* HBP = 34 */ + .vdisplay = 800, + .vsync_start = 800 + 15, /* VFP = 15 */ + .vsync_end = 800 + 15 + 12, /* VSync = 12 */ + .vtotal = 800 + 15 + 12 + 15, /* VBP = 15 */ + .flags = 0, + }, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM, + .cmds = NT35510_CMD_CONTROL_DISPLAY, + /* 0x03: AVDD = 6.2V */ + .avdd = { 0x03, 0x03, 0x03 }, + /* 0x46: PCK = 2 x Hsync, BTP = 2.5 x VDDB */ + .bt1ctr = { 0x46, 0x46, 0x46 }, + /* 0x03: AVEE = -6.2V */ + .avee = { 0x03, 0x03, 0x03 }, + /* 0x36: PCK = 2 x Hsync, BTP = 2 x VDDB */ + .bt2ctr = { 0x36, 0x36, 0x36 }, + /* VBCLA: -2.5V, VBCLB: -2.5V, VBCLC: -3.5V */ + .vcl = { 0x00, 0x00, 0x02 }, + /* 0x26: CLCK = 2 x Hsync, BTN = -1 x VDDB */ + .bt3ctr = { 0x26, 0x26, 0x26 }, + /* 0x09 = 16V */ + .vgh = { 0x09, 0x09, 0x09 }, + /* 0x36: HCK = 2 x Hsync, VGH = 2 x AVDD - AVEE */ + .bt4ctr = { 0x36, 0x36, 0x36 }, + /* 0x08 = -10V */ + .vgl = { 0x08, 0x08, 0x08 }, + /* 0x26: LCK = 2 x Hsync, VGL = AVDD + VCL - AVDD */ + .bt5ctr = { 0x26, 0x26, 0x26 }, + /* VGMP: 0x080 = 4.6V, VGSP = 0V */ + .vgp = { 0x00, 0x80, 0x00 }, + /* VGMP: 0x080 = 4.6V, VGSP = 0V */ + .vgn = { 0x00, 0x80, 0x00 }, + /* VCMOFFSEL = VCOM voltage offset mode, VCM = -1V */ + .vcmoff = { 0x00, 0x50 }, + .dopctr = { NT35510_DOPCTR_0_RAMKP | NT35510_DOPCTR_0_DSITE | + NT35510_DOPCTR_0_DSIG | NT35510_DOPCTR_0_DSIM | + NT35510_DOPCTR_0_EOTP | NT35510_DOPCTR_0_N565, 0 }, + .madctl = NT35510_ROTATE_180_SETTING, + /* 0x03: SDT = 1.5 us */ + .sdhdtctr = 0x03, + /* EQ control for gate signals, 0x00 = 0 us */ + .gseqctr = { 0x00, 0x00 }, + /* SDEQCTR: source driver EQ mode 2, 1 us rise time on each step */ + .sdeqctr = { 0x01, 0x02, 0x02, 0x02 }, + /* SDVPCTR: Normal operation off color during v porch */ + .sdvpctr = 0x01, + /* T1: number of pixel clocks on one scanline: 0x184 = 389 clocks */ + .t1 = 0x0184, + /* VBP: vertical back porch toward the panel */ + .vbp = 0x1C, + /* VFP: vertical front porch toward the panel */ + .vfp = 0x1C, + /* PSEL: divide pixel clock 23MHz with 1 (no clock downscaling) */ + .psel = 0, + /* DPTMCTR12: 0x03: LVGL = VGLX, overlap mode, swap R->L O->E */ + .dpmctr12 = { 0x03, 0x00, 0x00, }, + /* write display brightness */ + .wrdisbv = 0x7f, + /* write control display */ + .wrctrld = NT35510_WRCTRLD_BCTRL | NT35510_WRCTRLD_DD | + NT35510_WRCTRLD_BL, + /* write content adaptive brightness control */ + .wrcabc = NT35510_WRCABC_STILL_MODE, + /* write CABC minimum brightness */ + .wrcabcmb = 0xff, +}; + static const struct of_device_id nt35510_of_match[] = { + { + .compatible = "frida,frd400b25025", + .data = &nt35510_frida_frd400b25025, + }, { .compatible = "hydis,hva40wv1", .data = &nt35510_hydis_hva40wv1, -- cgit v1.2.3