From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/hwmon/adm1031.c | 1081 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1081 insertions(+) create mode 100644 drivers/hwmon/adm1031.c (limited to 'drivers/hwmon/adm1031.c') diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c new file mode 100644 index 0000000000..88c7e0d62d --- /dev/null +++ b/drivers/hwmon/adm1031.c @@ -0,0 +1,1081 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * adm1031.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Based on lm75.c and lm85.c + * Supports adm1030 / adm1031 + * Copyright (C) 2004 Alexandre d'Alton + * Reworked by Jean Delvare + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Following macros takes channel parameter starting from 0 to 2 */ +#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr)) +#define ADM1031_REG_FAN_DIV(nr) (0x20 + (nr)) +#define ADM1031_REG_PWM (0x22) +#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr)) +#define ADM1031_REG_FAN_FILTER (0x23) + +#define ADM1031_REG_TEMP_OFFSET(nr) (0x0d + (nr)) +#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4 * (nr)) +#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4 * (nr)) +#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4 * (nr)) + +#define ADM1031_REG_TEMP(nr) (0x0a + (nr)) +#define ADM1031_REG_AUTO_TEMP(nr) (0x24 + (nr)) + +#define ADM1031_REG_STATUS(nr) (0x2 + (nr)) + +#define ADM1031_REG_CONF1 0x00 +#define ADM1031_REG_CONF2 0x01 +#define ADM1031_REG_EXT_TEMP 0x06 + +#define ADM1031_CONF1_MONITOR_ENABLE 0x01 /* Monitoring enable */ +#define ADM1031_CONF1_PWM_INVERT 0x08 /* PWM Invert */ +#define ADM1031_CONF1_AUTO_MODE 0x80 /* Auto FAN */ + +#define ADM1031_CONF2_PWM1_ENABLE 0x01 +#define ADM1031_CONF2_PWM2_ENABLE 0x02 +#define ADM1031_CONF2_TACH1_ENABLE 0x04 +#define ADM1031_CONF2_TACH2_ENABLE 0x08 +#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan)) + +#define ADM1031_UPDATE_RATE_MASK 0x1c +#define ADM1031_UPDATE_RATE_SHIFT 2 + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; + +enum chips { adm1030, adm1031 }; + +typedef u8 auto_chan_table_t[8][2]; + +/* Each client has this additional data */ +struct adm1031_data { + struct i2c_client *client; + const struct attribute_group *groups[3]; + struct mutex update_lock; + int chip_type; + bool valid; /* true if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned int update_interval; /* In milliseconds */ + /* + * The chan_select_table contains the possible configurations for + * auto fan control. + */ + const auto_chan_table_t *chan_select_table; + u16 alarm; + u8 conf1; + u8 conf2; + u8 fan[2]; + u8 fan_div[2]; + u8 fan_min[2]; + u8 pwm[2]; + u8 old_pwm[2]; + s8 temp[3]; + u8 ext_temp[3]; + u8 auto_temp[3]; + u8 auto_temp_min[3]; + u8 auto_temp_off[3]; + u8 auto_temp_max[3]; + s8 temp_offset[3]; + s8 temp_min[3]; + s8 temp_max[3]; + s8 temp_crit[3]; +}; + +static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int +adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static struct adm1031_data *adm1031_update_device(struct device *dev) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long next_update; + int chan; + + mutex_lock(&data->update_lock); + + next_update = data->last_updated + + msecs_to_jiffies(data->update_interval); + if (time_after(jiffies, next_update) || !data->valid) { + + dev_dbg(&client->dev, "Starting adm1031 update\n"); + for (chan = 0; + chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) { + u8 oldh, newh; + + oldh = + adm1031_read_value(client, ADM1031_REG_TEMP(chan)); + data->ext_temp[chan] = + adm1031_read_value(client, ADM1031_REG_EXT_TEMP); + newh = + adm1031_read_value(client, ADM1031_REG_TEMP(chan)); + if (newh != oldh) { + data->ext_temp[chan] = + adm1031_read_value(client, + ADM1031_REG_EXT_TEMP); +#ifdef DEBUG + oldh = + adm1031_read_value(client, + ADM1031_REG_TEMP(chan)); + + /* oldh is actually newer */ + if (newh != oldh) + dev_warn(&client->dev, + "Remote temperature may be wrong.\n"); +#endif + } + data->temp[chan] = newh; + + data->temp_offset[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_OFFSET(chan)); + data->temp_min[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_MIN(chan)); + data->temp_max[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_MAX(chan)); + data->temp_crit[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_CRIT(chan)); + data->auto_temp[chan] = + adm1031_read_value(client, + ADM1031_REG_AUTO_TEMP(chan)); + + } + + data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1); + data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2); + + data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0)) + | (adm1031_read_value(client, ADM1031_REG_STATUS(1)) << 8); + if (data->chip_type == adm1030) + data->alarm &= 0xc0ff; + + for (chan = 0; chan < (data->chip_type == adm1030 ? 1 : 2); + chan++) { + data->fan_div[chan] = + adm1031_read_value(client, + ADM1031_REG_FAN_DIV(chan)); + data->fan_min[chan] = + adm1031_read_value(client, + ADM1031_REG_FAN_MIN(chan)); + data->fan[chan] = + adm1031_read_value(client, + ADM1031_REG_FAN_SPEED(chan)); + data->pwm[chan] = + (adm1031_read_value(client, + ADM1031_REG_PWM) >> (4 * chan)) & 0x0f; + } + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +#define TEMP_TO_REG(val) (((val) < 0 ? ((val - 500) / 1000) : \ + ((val + 500) / 1000))) + +#define TEMP_FROM_REG(val) ((val) * 1000) + +#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125) + +#define TEMP_OFFSET_TO_REG(val) (TEMP_TO_REG(val) & 0x8f) +#define TEMP_OFFSET_FROM_REG(val) TEMP_FROM_REG((val) < 0 ? \ + (val) | 0x70 : (val)) + +#define FAN_FROM_REG(reg, div) ((reg) ? \ + (11250 * 60) / ((reg) * (div)) : 0) + +static int FAN_TO_REG(int reg, int div) +{ + int tmp; + tmp = FAN_FROM_REG(clamp_val(reg, 0, 65535), div); + return tmp > 255 ? 255 : tmp; +} + +#define FAN_DIV_FROM_REG(reg) (1<<(((reg)&0xc0)>>6)) + +#define PWM_TO_REG(val) (clamp_val((val), 0, 255) >> 4) +#define PWM_FROM_REG(val) ((val) << 4) + +#define FAN_CHAN_FROM_REG(reg) (((reg) >> 5) & 7) +#define FAN_CHAN_TO_REG(val, reg) \ + (((reg) & 0x1F) | (((val) << 5) & 0xe0)) + +#define AUTO_TEMP_MIN_TO_REG(val, reg) \ + ((((val) / 500) & 0xf8) | ((reg) & 0x7)) +#define AUTO_TEMP_RANGE_FROM_REG(reg) (5000 * (1 << ((reg) & 0x7))) +#define AUTO_TEMP_MIN_FROM_REG(reg) (1000 * ((((reg) >> 3) & 0x1f) << 2)) + +#define AUTO_TEMP_MIN_FROM_REG_DEG(reg) ((((reg) >> 3) & 0x1f) << 2) + +#define AUTO_TEMP_OFF_FROM_REG(reg) \ + (AUTO_TEMP_MIN_FROM_REG(reg) - 5000) + +#define AUTO_TEMP_MAX_FROM_REG(reg) \ + (AUTO_TEMP_RANGE_FROM_REG(reg) + \ + AUTO_TEMP_MIN_FROM_REG(reg)) + +static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm) +{ + int ret; + int range = ((val - AUTO_TEMP_MIN_FROM_REG(reg)) * 10) / (16 - pwm); + + ret = ((reg & 0xf8) | + (range < 10000 ? 0 : + range < 20000 ? 1 : + range < 40000 ? 2 : range < 80000 ? 3 : 4)); + return ret; +} + +/* FAN auto control */ +#define GET_FAN_AUTO_BITFIELD(data, idx) \ + (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx % 2] + +/* + * The tables below contains the possible values for the auto fan + * control bitfields. the index in the table is the register value. + * MSb is the auto fan control enable bit, so the four first entries + * in the table disables auto fan control when both bitfields are zero. + */ +static const auto_chan_table_t auto_channel_select_table_adm1031 = { + { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, + { 2 /* 0b010 */ , 4 /* 0b100 */ }, + { 2 /* 0b010 */ , 2 /* 0b010 */ }, + { 4 /* 0b100 */ , 4 /* 0b100 */ }, + { 7 /* 0b111 */ , 7 /* 0b111 */ }, +}; + +static const auto_chan_table_t auto_channel_select_table_adm1030 = { + { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, + { 2 /* 0b10 */ , 0 }, + { 0xff /* invalid */ , 0 }, + { 0xff /* invalid */ , 0 }, + { 3 /* 0b11 */ , 0 }, +}; + +/* + * That function checks if a bitfield is valid and returns the other bitfield + * nearest match if no exact match where found. + */ +static int +get_fan_auto_nearest(struct adm1031_data *data, int chan, u8 val, u8 reg) +{ + int i; + int first_match = -1, exact_match = -1; + u8 other_reg_val = + (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1]; + + if (val == 0) + return 0; + + for (i = 0; i < 8; i++) { + if ((val == (*data->chan_select_table)[i][chan]) && + ((*data->chan_select_table)[i][chan ? 0 : 1] == + other_reg_val)) { + /* We found an exact match */ + exact_match = i; + break; + } else if (val == (*data->chan_select_table)[i][chan] && + first_match == -1) { + /* + * Save the first match in case of an exact match has + * not been found + */ + first_match = i; + } + } + + if (exact_match >= 0) + return exact_match; + else if (first_match >= 0) + return first_match; + + return -EINVAL; +} + +static ssize_t fan_auto_channel_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr)); +} + +static ssize_t +fan_auto_channel_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + u8 reg; + int ret; + u8 old_fan_mode; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + old_fan_mode = data->conf1; + + mutex_lock(&data->update_lock); + + ret = get_fan_auto_nearest(data, nr, val, data->conf1); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + reg = ret; + data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); + if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^ + (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) { + if (data->conf1 & ADM1031_CONF1_AUTO_MODE) { + /* + * Switch to Auto Fan Mode + * Save PWM registers + * Set PWM registers to 33% Both + */ + data->old_pwm[0] = data->pwm[0]; + data->old_pwm[1] = data->pwm[1]; + adm1031_write_value(client, ADM1031_REG_PWM, 0x55); + } else { + /* Switch to Manual Mode */ + data->pwm[0] = data->old_pwm[0]; + data->pwm[1] = data->old_pwm[1]; + /* Restore PWM registers */ + adm1031_write_value(client, ADM1031_REG_PWM, + data->pwm[0] | (data->pwm[1] << 4)); + } + } + data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); + adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RW(auto_fan1_channel, fan_auto_channel, 0); +static SENSOR_DEVICE_ATTR_RW(auto_fan2_channel, fan_auto_channel, 1); + +/* Auto Temps */ +static ssize_t auto_temp_off_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr])); +} +static ssize_t auto_temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr])); +} +static ssize_t +auto_temp_min_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + val = clamp_val(val, 0, 127000); + mutex_lock(&data->update_lock); + data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); + adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), + data->auto_temp[nr]); + mutex_unlock(&data->update_lock); + return count; +} +static ssize_t auto_temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr])); +} +static ssize_t +auto_temp_max_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + val = clamp_val(val, 0, 127000); + mutex_lock(&data->update_lock); + data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], + data->pwm[nr]); + adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), + data->temp_max[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RO(auto_temp1_off, auto_temp_off, 0); +static SENSOR_DEVICE_ATTR_RW(auto_temp1_min, auto_temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(auto_temp1_max, auto_temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(auto_temp2_off, auto_temp_off, 1); +static SENSOR_DEVICE_ATTR_RW(auto_temp2_min, auto_temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(auto_temp2_max, auto_temp_max, 1); +static SENSOR_DEVICE_ATTR_RO(auto_temp3_off, auto_temp_off, 2); +static SENSOR_DEVICE_ATTR_RW(auto_temp3_min, auto_temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(auto_temp3_max, auto_temp_max, 2); + +/* pwm */ +static ssize_t pwm_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); +} +static ssize_t pwm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret, reg; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && + (((val>>4) & 0xf) != 5)) { + /* In automatic mode, the only PWM accepted is 33% */ + mutex_unlock(&data->update_lock); + return -EINVAL; + } + data->pwm[nr] = PWM_TO_REG(val); + reg = adm1031_read_value(client, ADM1031_REG_PWM); + adm1031_write_value(client, ADM1031_REG_PWM, + nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf) + : (data->pwm[nr] & 0xf) | (reg & 0xf0)); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); +static SENSOR_DEVICE_ATTR_RW(auto_fan1_min_pwm, pwm, 0); +static SENSOR_DEVICE_ATTR_RW(auto_fan2_min_pwm, pwm, 1); + +/* Fans */ + +/* + * That function checks the cases where the fan reading is not + * relevant. It is used to provide 0 as fan reading when the fan is + * not supposed to run + */ +static int trust_fan_readings(struct adm1031_data *data, int chan) +{ + int res = 0; + + if (data->conf1 & ADM1031_CONF1_AUTO_MODE) { + switch (data->conf1 & 0x60) { + case 0x00: + /* + * remote temp1 controls fan1, + * remote temp2 controls fan2 + */ + res = data->temp[chan+1] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]); + break; + case 0x20: /* remote temp1 controls both fans */ + res = + data->temp[1] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]); + break; + case 0x40: /* remote temp2 controls both fans */ + res = + data->temp[2] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]); + break; + case 0x60: /* max controls both fans */ + res = + data->temp[0] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0]) + || data->temp[1] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]) + || (data->chip_type == adm1031 + && data->temp[2] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2])); + break; + } + } else { + res = data->pwm[chan] > 0; + } + return res; +} + +static ssize_t fan_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + int value; + + value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr], + FAN_DIV_FROM_REG(data->fan_div[nr])) : 0; + return sprintf(buf, "%d\n", value); +} + +static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr])); +} +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + FAN_FROM_REG(data->fan_min[nr], + FAN_DIV_FROM_REG(data->fan_div[nr]))); +} +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + if (val) { + data->fan_min[nr] = + FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr])); + } else { + data->fan_min[nr] = 0xff; + } + adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + u8 tmp; + int old_div; + int new_min; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + tmp = val == 8 ? 0xc0 : + val == 4 ? 0x80 : + val == 2 ? 0x40 : + val == 1 ? 0x00 : + 0xff; + if (tmp == 0xff) + return -EINVAL; + + mutex_lock(&data->update_lock); + /* Get fresh readings */ + data->fan_div[nr] = adm1031_read_value(client, + ADM1031_REG_FAN_DIV(nr)); + data->fan_min[nr] = adm1031_read_value(client, + ADM1031_REG_FAN_MIN(nr)); + + /* Write the new clock divider and fan min */ + old_div = FAN_DIV_FROM_REG(data->fan_div[nr]); + data->fan_div[nr] = tmp | (0x3f & data->fan_div[nr]); + new_min = data->fan_min[nr] * old_div / val; + data->fan_min[nr] = new_min > 0xff ? 0xff : new_min; + + adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), + data->fan_div[nr]); + adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), + data->fan_min[nr]); + + /* Invalidate the cache: fan speed is no longer valid */ + data->valid = false; + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); + +/* Temps */ +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + int ext; + ext = nr == 0 ? + ((data->ext_temp[nr] >> 6) & 0x3) * 2 : + (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7)); + return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext)); +} +static ssize_t temp_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + TEMP_OFFSET_FROM_REG(data->temp_offset[nr])); +} +static ssize_t temp_min_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); +} +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); +} +static ssize_t temp_crit_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); +} +static ssize_t temp_offset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + val = clamp_val(val, -15000, 15000); + mutex_lock(&data->update_lock); + data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr), + data->temp_offset[nr]); + mutex_unlock(&data->update_lock); + return count; +} +static ssize_t temp_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + val = clamp_val(val, -55000, 127000); + mutex_lock(&data->update_lock); + data->temp_min[nr] = TEMP_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), + data->temp_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + val = clamp_val(val, -55000, 127000); + mutex_lock(&data->update_lock); + data->temp_max[nr] = TEMP_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), + data->temp_max[nr]); + mutex_unlock(&data->update_lock); + return count; +} +static ssize_t temp_crit_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret) + return ret; + + val = clamp_val(val, -55000, 127000); + mutex_lock(&data->update_lock); + data->temp_crit[nr] = TEMP_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), + data->temp_crit[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_offset, temp_offset, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp_crit, 0); +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, temp_offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp_crit, 1); +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, temp_offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_crit, temp_crit, 2); + +/* Alarms */ +static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", data->alarm); +} + +static DEVICE_ATTR_RO(alarms); + +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", (data->alarm >> bitnr) & 1); +} + +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(fan1_fault, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); +static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 7); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 8); +static SENSOR_DEVICE_ATTR_RO(fan2_fault, alarm, 9); +static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, 10); +static SENSOR_DEVICE_ATTR_RO(temp3_min_alarm, alarm, 11); +static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, 12); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 13); +static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 14); + +/* Update Interval */ +static const unsigned int update_intervals[] = { + 16000, 8000, 4000, 2000, 1000, 500, 250, 125, +}; + +static ssize_t update_interval_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", data->update_interval); +} + +static ssize_t update_interval_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adm1031_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int i, err; + u8 reg; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + /* + * Find the nearest update interval from the table. + * Use it to determine the matching update rate. + */ + for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) { + if (val >= update_intervals[i]) + break; + } + /* if not found, we point to the last entry (lowest update interval) */ + + /* set the new update rate while preserving other settings */ + reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER); + reg &= ~ADM1031_UPDATE_RATE_MASK; + reg |= i << ADM1031_UPDATE_RATE_SHIFT; + adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg); + + mutex_lock(&data->update_lock); + data->update_interval = update_intervals[i]; + mutex_unlock(&data->update_lock); + + return count; +} + +static DEVICE_ATTR_RW(update_interval); + +static struct attribute *adm1031_attributes[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_auto_fan1_channel.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + + &sensor_dev_attr_auto_temp1_off.dev_attr.attr, + &sensor_dev_attr_auto_temp1_min.dev_attr.attr, + &sensor_dev_attr_auto_temp1_max.dev_attr.attr, + + &sensor_dev_attr_auto_temp2_off.dev_attr.attr, + &sensor_dev_attr_auto_temp2_min.dev_attr.attr, + &sensor_dev_attr_auto_temp2_max.dev_attr.attr, + + &sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr, + + &dev_attr_update_interval.attr, + &dev_attr_alarms.attr, + + NULL +}; + +static const struct attribute_group adm1031_group = { + .attrs = adm1031_attributes, +}; + +static struct attribute *adm1031_attributes_opt[] = { + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_fault.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_auto_fan2_channel.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_auto_temp3_off.dev_attr.attr, + &sensor_dev_attr_auto_temp3_min.dev_attr.attr, + &sensor_dev_attr_auto_temp3_max.dev_attr.attr, + &sensor_dev_attr_auto_fan2_min_pwm.dev_attr.attr, + NULL +}; + +static const struct attribute_group adm1031_group_opt = { + .attrs = adm1031_attributes_opt, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1031_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + const char *name; + int id, co; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + id = i2c_smbus_read_byte_data(client, 0x3d); + co = i2c_smbus_read_byte_data(client, 0x3e); + + if (!((id == 0x31 || id == 0x30) && co == 0x41)) + return -ENODEV; + name = (id == 0x30) ? "adm1030" : "adm1031"; + + strscpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static void adm1031_init_client(struct i2c_client *client) +{ + unsigned int read_val; + unsigned int mask; + int i; + struct adm1031_data *data = i2c_get_clientdata(client); + + mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE); + if (data->chip_type == adm1031) { + mask |= (ADM1031_CONF2_PWM2_ENABLE | + ADM1031_CONF2_TACH2_ENABLE); + } + /* Initialize the ADM1031 chip (enables fan speed reading ) */ + read_val = adm1031_read_value(client, ADM1031_REG_CONF2); + if ((read_val | mask) != read_val) + adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask); + + read_val = adm1031_read_value(client, ADM1031_REG_CONF1); + if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) { + adm1031_write_value(client, ADM1031_REG_CONF1, + read_val | ADM1031_CONF1_MONITOR_ENABLE); + } + + /* Read the chip's update rate */ + mask = ADM1031_UPDATE_RATE_MASK; + read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER); + i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT; + /* Save it as update interval */ + data->update_interval = update_intervals[i]; +} + +static const struct i2c_device_id adm1031_id[]; + +static int adm1031_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct adm1031_data *data; + + data = devm_kzalloc(dev, sizeof(struct adm1031_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + data->client = client; + data->chip_type = i2c_match_id(adm1031_id, client)->driver_data; + mutex_init(&data->update_lock); + + if (data->chip_type == adm1030) + data->chan_select_table = &auto_channel_select_table_adm1030; + else + data->chan_select_table = &auto_channel_select_table_adm1031; + + /* Initialize the ADM1031 chip */ + adm1031_init_client(client); + + /* sysfs hooks */ + data->groups[0] = &adm1031_group; + if (data->chip_type == adm1031) + data->groups[1] = &adm1031_group_opt; + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id adm1031_id[] = { + { "adm1030", adm1030 }, + { "adm1031", adm1031 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1031_id); + +static struct i2c_driver adm1031_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adm1031", + }, + .probe = adm1031_probe, + .id_table = adm1031_id, + .detect = adm1031_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(adm1031_driver); + +MODULE_AUTHOR("Alexandre d'Alton "); +MODULE_DESCRIPTION("ADM1031/ADM1030 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3