From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/hwmon/corsair-cpro.c | 583 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 583 insertions(+) create mode 100644 drivers/hwmon/corsair-cpro.c (limited to 'drivers/hwmon/corsair-cpro.c') diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c new file mode 100644 index 0000000000..463ab4296e --- /dev/null +++ b/drivers/hwmon/corsair-cpro.c @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * corsair-cpro.c - Linux driver for Corsair Commander Pro + * Copyright (C) 2020 Marius Zachmann + * + * This driver uses hid reports to communicate with the device to allow hidraw userspace drivers + * still being used. The device does not use report ids. When using hidraw and this driver + * simultaniously, reports could be switched. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_VENDOR_ID_CORSAIR 0x1b1c +#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10 +#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00 + +#define OUT_BUFFER_SIZE 63 +#define IN_BUFFER_SIZE 16 +#define LABEL_LENGTH 11 +#define REQ_TIMEOUT 300 + +#define CTL_GET_TMP_CNCT 0x10 /* + * returns in bytes 1-4 for each temp sensor: + * 0 not connected + * 1 connected + */ +#define CTL_GET_TMP 0x11 /* + * send: byte 1 is channel, rest zero + * rcv: returns temp for channel in centi-degree celsius + * in bytes 1 and 2 + * returns 0x11 in byte 0 if no sensor is connected + */ +#define CTL_GET_VOLT 0x12 /* + * send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v + * rcv: returns millivolt in bytes 1,2 + * returns error 0x10 if request is invalid + */ +#define CTL_GET_FAN_CNCT 0x20 /* + * returns in bytes 1-6 for each fan: + * 0 not connected + * 1 3pin + * 2 4pin + */ +#define CTL_GET_FAN_RPM 0x21 /* + * send: byte 1 is channel, rest zero + * rcv: returns rpm in bytes 1,2 + */ +#define CTL_GET_FAN_PWM 0x22 /* + * send: byte 1 is channel, rest zero + * rcv: returns pwm in byte 1 if it was set + * returns error 0x12 if fan is controlled via + * fan_target or fan curve + */ +#define CTL_SET_FAN_FPWM 0x23 /* + * set fixed pwm + * send: byte 1 is fan number + * send: byte 2 is percentage from 0 - 100 + */ +#define CTL_SET_FAN_TARGET 0x24 /* + * set target rpm + * send: byte 1 is fan number + * send: byte 2-3 is target + * device accepts all values from 0x00 - 0xFFFF + */ + +#define NUM_FANS 6 +#define NUM_TEMP_SENSORS 4 + +struct ccp_device { + struct hid_device *hdev; + struct device *hwmon_dev; + struct completion wait_input_report; + struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ + u8 *buffer; + int target[6]; + DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); + DECLARE_BITMAP(fan_cnct, NUM_FANS); + char fan_label[6][LABEL_LENGTH]; +}; + +/* converts response error in buffer to errno */ +static int ccp_get_errno(struct ccp_device *ccp) +{ + switch (ccp->buffer[0]) { + case 0x00: /* success */ + return 0; + case 0x01: /* called invalid command */ + return -EOPNOTSUPP; + case 0x10: /* called GET_VOLT / GET_TMP with invalid arguments */ + return -EINVAL; + case 0x11: /* requested temps of disconnected sensors */ + case 0x12: /* requested pwm of not pwm controlled channels */ + return -ENODATA; + default: + hid_dbg(ccp->hdev, "unknown device response error: %d", ccp->buffer[0]); + return -EIO; + } +} + +/* send command, check for error in response, response in ccp->buffer */ +static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, u8 byte3) +{ + unsigned long t; + int ret; + + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); + ccp->buffer[0] = command; + ccp->buffer[1] = byte1; + ccp->buffer[2] = byte2; + ccp->buffer[3] = byte3; + + reinit_completion(&ccp->wait_input_report); + + ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE); + if (ret < 0) + return ret; + + t = wait_for_completion_timeout(&ccp->wait_input_report, msecs_to_jiffies(REQ_TIMEOUT)); + if (!t) + return -ETIMEDOUT; + + return ccp_get_errno(ccp); +} + +static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) +{ + struct ccp_device *ccp = hid_get_drvdata(hdev); + + /* only copy buffer when requested */ + if (completion_done(&ccp->wait_input_report)) + return 0; + + memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size)); + complete(&ccp->wait_input_report); + + return 0; +} + +/* requests and returns single data values depending on channel */ +static int get_data(struct ccp_device *ccp, int command, int channel, bool two_byte_data) +{ + int ret; + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, command, channel, 0, 0); + if (ret) + goto out_unlock; + + ret = ccp->buffer[1]; + if (two_byte_data) + ret = (ret << 8) + ccp->buffer[2]; + +out_unlock: + mutex_unlock(&ccp->mutex); + return ret; +} + +static int set_pwm(struct ccp_device *ccp, int channel, long val) +{ + int ret; + + if (val < 0 || val > 255) + return -EINVAL; + + /* The Corsair Commander Pro uses values from 0-100 */ + val = DIV_ROUND_CLOSEST(val * 100, 255); + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val, 0); + if (!ret) + ccp->target[channel] = -ENODATA; + + mutex_unlock(&ccp->mutex); + return ret; +} + +static int set_target(struct ccp_device *ccp, int channel, long val) +{ + int ret; + + val = clamp_val(val, 0, 0xFFFF); + ccp->target[channel] = val; + + mutex_lock(&ccp->mutex); + ret = send_usb_cmd(ccp, CTL_SET_FAN_TARGET, channel, val >> 8, val); + + mutex_unlock(&ccp->mutex); + return ret; +} + +static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_label: + *str = ccp->fan_label[channel]; + return 0; + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +} + +static int ccp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + ret = get_data(ccp, CTL_GET_TMP, channel, true); + if (ret < 0) + return ret; + *val = ret * 10; + return 0; + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + ret = get_data(ccp, CTL_GET_FAN_RPM, channel, true); + if (ret < 0) + return ret; + *val = ret; + return 0; + case hwmon_fan_target: + /* how to read target values from the device is unknown */ + /* driver returns last set value or 0 */ + if (ccp->target[channel] < 0) + return -ENODATA; + *val = ccp->target[channel]; + return 0; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret = get_data(ccp, CTL_GET_FAN_PWM, channel, false); + if (ret < 0) + return ret; + *val = DIV_ROUND_CLOSEST(ret * 255, 100); + return 0; + default: + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + ret = get_data(ccp, CTL_GET_VOLT, channel, true); + if (ret < 0) + return ret; + *val = ret; + return 0; + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +}; + +static int ccp_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return set_pwm(ccp, channel, val); + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_target: + return set_target(ccp, channel, val); + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +}; + +static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct ccp_device *ccp = data; + + switch (type) { + case hwmon_temp: + if (!test_bit(channel, ccp->temp_cnct)) + break; + + switch (attr) { + case hwmon_temp_input: + return 0444; + case hwmon_temp_label: + return 0444; + default: + break; + } + break; + case hwmon_fan: + if (!test_bit(channel, ccp->fan_cnct)) + break; + + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_label: + return 0444; + case hwmon_fan_target: + return 0644; + default: + break; + } + break; + case hwmon_pwm: + if (!test_bit(channel, ccp->fan_cnct)) + break; + + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + return 0444; + default: + break; + } + break; + default: + break; + } + + return 0; +}; + +static const struct hwmon_ops ccp_hwmon_ops = { + .is_visible = ccp_is_visible, + .read = ccp_read, + .read_string = ccp_read_string, + .write = ccp_write, +}; + +static const struct hwmon_channel_info * const ccp_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT + ), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET + ), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT + ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT + ), + NULL +}; + +static const struct hwmon_chip_info ccp_chip_info = { + .ops = &ccp_hwmon_ops, + .info = ccp_info, +}; + +/* read fan connection status and set labels */ +static int get_fan_cnct(struct ccp_device *ccp) +{ + int channel; + int mode; + int ret; + + ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0, 0); + if (ret) + return ret; + + for (channel = 0; channel < NUM_FANS; channel++) { + mode = ccp->buffer[channel + 1]; + if (mode == 0) + continue; + + set_bit(channel, ccp->fan_cnct); + ccp->target[channel] = -ENODATA; + + switch (mode) { + case 1: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 3pin", channel + 1); + break; + case 2: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 4pin", channel + 1); + break; + default: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d other", channel + 1); + break; + } + } + + return 0; +} + +/* read temp sensor connection status */ +static int get_temp_cnct(struct ccp_device *ccp) +{ + int channel; + int mode; + int ret; + + ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0, 0); + if (ret) + return ret; + + for (channel = 0; channel < NUM_TEMP_SENSORS; channel++) { + mode = ccp->buffer[channel + 1]; + if (mode == 0) + continue; + + set_bit(channel, ccp->temp_cnct); + } + + return 0; +} + +static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct ccp_device *ccp; + int ret; + + ccp = devm_kzalloc(&hdev->dev, sizeof(*ccp), GFP_KERNEL); + if (!ccp) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->buffer) + return -ENOMEM; + + ret = hid_parse(hdev); + if (ret) + return ret; + + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (ret) + return ret; + + ret = hid_hw_open(hdev); + if (ret) + goto out_hw_stop; + + ccp->hdev = hdev; + hid_set_drvdata(hdev, ccp); + mutex_init(&ccp->mutex); + init_completion(&ccp->wait_input_report); + + hid_device_io_start(hdev); + + /* temp and fan connection status only updates when device is powered on */ + ret = get_temp_cnct(ccp); + if (ret) + goto out_hw_close; + + ret = get_fan_cnct(ccp); + if (ret) + goto out_hw_close; + ccp->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsaircpro", + ccp, &ccp_chip_info, 0); + if (IS_ERR(ccp->hwmon_dev)) { + ret = PTR_ERR(ccp->hwmon_dev); + goto out_hw_close; + } + + return 0; + +out_hw_close: + hid_hw_close(hdev); +out_hw_stop: + hid_hw_stop(hdev); + return ret; +} + +static void ccp_remove(struct hid_device *hdev) +{ + struct ccp_device *ccp = hid_get_drvdata(hdev); + + hwmon_device_unregister(ccp->hwmon_dev); + hid_hw_close(hdev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id ccp_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) }, + { } +}; + +static struct hid_driver ccp_driver = { + .name = "corsair-cpro", + .id_table = ccp_devices, + .probe = ccp_probe, + .remove = ccp_remove, + .raw_event = ccp_raw_event, +}; + +MODULE_DEVICE_TABLE(hid, ccp_devices); +MODULE_LICENSE("GPL"); + +static int __init ccp_init(void) +{ + return hid_register_driver(&ccp_driver); +} + +static void __exit ccp_exit(void) +{ + hid_unregister_driver(&ccp_driver); +} + +/* + * When compiling this driver as built-in, hwmon initcalls will get called before the + * hid driver and this driver would fail to register. late_initcall solves this. + */ +late_initcall(ccp_init); +module_exit(ccp_exit); -- cgit v1.2.3