From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/hwmon/fschmd.c | 1370 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1370 insertions(+) create mode 100644 drivers/hwmon/fschmd.c (limited to 'drivers/hwmon/fschmd.c') diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c new file mode 100644 index 0000000000..b30512a705 --- /dev/null +++ b/drivers/hwmon/fschmd.c @@ -0,0 +1,1370 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * fschmd.c + * + * Copyright (C) 2007 - 2009 Hans de Goede + */ + +/* + * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes, + * Scylla, Heracles, Heimdall, Hades and Syleus chips + * + * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6 + * (candidate) fschmd drivers: + * Copyright (C) 2006 Thilo Cestonaro + * + * Copyright (C) 2004, 2005 Stefan Ott + * Copyright (C) 2003, 2004 Reinhard Nissl + * Copyright (c) 2001 Martin Knoblauch + * Copyright (C) 2000 Hermann Jung + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; + +/* Insmod parameters */ +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl }; + +/* + * The FSCHMD registers and other defines + */ + +/* chip identification */ +#define FSCHMD_REG_IDENT_0 0x00 +#define FSCHMD_REG_IDENT_1 0x01 +#define FSCHMD_REG_IDENT_2 0x02 +#define FSCHMD_REG_REVISION 0x03 + +/* global control and status */ +#define FSCHMD_REG_EVENT_STATE 0x04 +#define FSCHMD_REG_CONTROL 0x05 + +#define FSCHMD_CONTROL_ALERT_LED 0x01 + +/* watchdog */ +static const u8 FSCHMD_REG_WDOG_CONTROL[7] = { + 0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 }; +static const u8 FSCHMD_REG_WDOG_STATE[7] = { + 0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 }; +static const u8 FSCHMD_REG_WDOG_PRESET[7] = { + 0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a }; + +#define FSCHMD_WDOG_CONTROL_TRIGGER 0x10 +#define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */ +#define FSCHMD_WDOG_CONTROL_STOP 0x20 +#define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40 + +#define FSCHMD_WDOG_STATE_CARDRESET 0x02 + +/* voltages, weird order is to keep the same order as the old drivers */ +static const u8 FSCHMD_REG_VOLT[7][6] = { + { 0x45, 0x42, 0x48 }, /* pos */ + { 0x45, 0x42, 0x48 }, /* her */ + { 0x45, 0x42, 0x48 }, /* scy */ + { 0x45, 0x42, 0x48 }, /* hrc */ + { 0x45, 0x42, 0x48 }, /* hmd */ + { 0x21, 0x20, 0x22 }, /* hds */ + { 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 }, /* syl */ +}; + +static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 }; + +/* + * minimum pwm at which the fan is driven (pwm can be increased depending on + * the temp. Notice that for the scy some fans share there minimum speed. + * Also notice that with the scy the sensor order is different than with the + * other chips, this order was in the 2.4 driver and kept for consistency. + */ +static const u8 FSCHMD_REG_FAN_MIN[7][7] = { + { 0x55, 0x65 }, /* pos */ + { 0x55, 0x65, 0xb5 }, /* her */ + { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */ + { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */ + { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */ + { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hds */ + { 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 }, /* syl */ +}; + +/* actual fan speed */ +static const u8 FSCHMD_REG_FAN_ACT[7][7] = { + { 0x0e, 0x6b, 0xab }, /* pos */ + { 0x0e, 0x6b, 0xbb }, /* her */ + { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */ + { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */ + { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */ + { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hds */ + { 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 }, /* syl */ +}; + +/* fan status registers */ +static const u8 FSCHMD_REG_FAN_STATE[7][7] = { + { 0x0d, 0x62, 0xa2 }, /* pos */ + { 0x0d, 0x62, 0xb2 }, /* her */ + { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */ + { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */ + { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */ + { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hds */ + { 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 }, /* syl */ +}; + +/* fan ripple / divider registers */ +static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = { + { 0x0f, 0x6f, 0xaf }, /* pos */ + { 0x0f, 0x6f, 0xbf }, /* her */ + { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */ + { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */ + { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */ + { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hds */ + { 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 }, /* syl */ +}; + +static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 }; + +/* Fan status register bitmasks */ +#define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */ +#define FSCHMD_FAN_NOT_PRESENT 0x08 +#define FSCHMD_FAN_DISABLED 0x80 + + +/* actual temperature registers */ +static const u8 FSCHMD_REG_TEMP_ACT[7][11] = { + { 0x64, 0x32, 0x35 }, /* pos */ + { 0x64, 0x32, 0x35 }, /* her */ + { 0x64, 0xD0, 0x32, 0x35 }, /* scy */ + { 0x64, 0x32, 0x35 }, /* hrc */ + { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */ + { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hds */ + { 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8, /* syl */ + 0xb8, 0xc8, 0xd8, 0xe8, 0xf8 }, +}; + +/* temperature state registers */ +static const u8 FSCHMD_REG_TEMP_STATE[7][11] = { + { 0x71, 0x81, 0x91 }, /* pos */ + { 0x71, 0x81, 0x91 }, /* her */ + { 0x71, 0xd1, 0x81, 0x91 }, /* scy */ + { 0x71, 0x81, 0x91 }, /* hrc */ + { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */ + { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hds */ + { 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9, /* syl */ + 0xb9, 0xc9, 0xd9, 0xe9, 0xf9 }, +}; + +/* + * temperature high limit registers, FSC does not document these. Proven to be + * there with field testing on the fscher and fschrc, already supported / used + * in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers + * at these addresses, but doesn't want to confirm they are the same as with + * the fscher?? + */ +static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = { + { 0, 0, 0 }, /* pos */ + { 0x76, 0x86, 0x96 }, /* her */ + { 0x76, 0xd6, 0x86, 0x96 }, /* scy */ + { 0x76, 0x86, 0x96 }, /* hrc */ + { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */ + { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hds */ + { 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa, /* syl */ + 0xba, 0xca, 0xda, 0xea, 0xfa }, +}; + +/* + * These were found through experimenting with an fscher, currently they are + * not used, but we keep them around for future reference. + * On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc), + * AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence + * the fan speed. + * static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 }; + * static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; + */ + +static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 }; + +/* temp status register bitmasks */ +#define FSCHMD_TEMP_WORKING 0x01 +#define FSCHMD_TEMP_ALERT 0x02 +#define FSCHMD_TEMP_DISABLED 0x80 +/* there only really is an alarm if the sensor is working and alert == 1 */ +#define FSCHMD_TEMP_ALARM_MASK \ + (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT) + +/* + * Functions declarations + */ + +static int fschmd_probe(struct i2c_client *client); +static int fschmd_detect(struct i2c_client *client, + struct i2c_board_info *info); +static void fschmd_remove(struct i2c_client *client); +static struct fschmd_data *fschmd_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id fschmd_id[] = { + { "fscpos", fscpos }, + { "fscher", fscher }, + { "fscscy", fscscy }, + { "fschrc", fschrc }, + { "fschmd", fschmd }, + { "fschds", fschds }, + { "fscsyl", fscsyl }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fschmd_id); + +static struct i2c_driver fschmd_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "fschmd", + }, + .probe = fschmd_probe, + .remove = fschmd_remove, + .id_table = fschmd_id, + .detect = fschmd_detect, + .address_list = normal_i2c, +}; + +/* + * Client data (each client gets its own) + */ + +struct fschmd_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct mutex update_lock; + struct mutex watchdog_lock; + struct list_head list; /* member of the watchdog_data_list */ + struct kref kref; + struct miscdevice watchdog_miscdev; + enum chips kind; + unsigned long watchdog_is_open; + char watchdog_expect_close; + char watchdog_name[10]; /* must be unique to avoid sysfs conflict */ + bool valid; /* false until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + u8 revision; /* chip revision */ + u8 global_control; /* global control register */ + u8 watchdog_control; /* watchdog control register */ + u8 watchdog_state; /* watchdog status register */ + u8 watchdog_preset; /* watchdog counter preset on trigger val */ + u8 volt[6]; /* voltage */ + u8 temp_act[11]; /* temperature */ + u8 temp_status[11]; /* status of sensor */ + u8 temp_max[11]; /* high temp limit, notice: undocumented! */ + u8 fan_act[7]; /* fans revolutions per second */ + u8 fan_status[7]; /* fan status */ + u8 fan_min[7]; /* fan min value for rps */ + u8 fan_ripple[7]; /* divider for rps */ +}; + +/* + * Global variables to hold information read from special DMI tables, which are + * available on FSC machines with an fscher or later chip. There is no need to + * protect these with a lock as they are only modified from our attach function + * which always gets called with the i2c-core lock held and never accessed + * before the attach function is done with them. + */ +static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 }; +static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 }; +static int dmi_vref = -1; + +/* + * Somewhat ugly :( global data pointer list with all fschmd devices, so that + * we can find our device data as when using misc_register there is no other + * method to get to ones device data from the open fop. + */ +static LIST_HEAD(watchdog_data_list); +/* Note this lock not only protect list access, but also data.kref access */ +static DEFINE_MUTEX(watchdog_data_mutex); + +/* + * Release our data struct when we're detached from the i2c client *and* all + * references to our watchdog device are released + */ +static void fschmd_release_resources(struct kref *ref) +{ + struct fschmd_data *data = container_of(ref, struct fschmd_data, kref); + kfree(data); +} + +/* + * Sysfs attr show / store functions + */ + +static ssize_t in_value_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + const int max_reading[3] = { 14200, 6600, 3300 }; + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->kind == fscher || data->kind >= fschrc) + return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref * + dmi_mult[index]) / 255 + dmi_offset[index]); + else + return sprintf(buf, "%d\n", (data->volt[index] * + max_reading[index] + 128) / 255); +} + + +#define TEMP_FROM_REG(val) (((val) - 128) * 1000) + +static ssize_t temp_value_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index])); +} + +static ssize_t temp_max_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index])); +} + +static ssize_t temp_max_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = dev_get_drvdata(dev); + long v; + int err; + + err = kstrtol(buf, 10, &v); + if (err) + return err; + + v = clamp_val(v / 1000, -128, 127) + 128; + + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(to_i2c_client(dev), + FSCHMD_REG_TEMP_LIMIT[data->kind][index], v); + data->temp_max[index] = v; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t temp_fault_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + /* bit 0 set means sensor working ok, so no fault! */ + if (data->temp_status[index] & FSCHMD_TEMP_WORKING) + return sprintf(buf, "0\n"); + else + return sprintf(buf, "1\n"); +} + +static ssize_t temp_alarm_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) == + FSCHMD_TEMP_ALARM_MASK) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + + +#define RPM_FROM_REG(val) ((val) * 60) + +static ssize_t fan_value_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index])); +} + +static ssize_t fan_div_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + /* bits 2..7 reserved => mask with 3 */ + return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3)); +} + +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + u8 reg; + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = dev_get_drvdata(dev); + /* supported values: 2, 4, 8 */ + unsigned long v; + int err; + + err = kstrtoul(buf, 10, &v); + if (err) + return err; + + switch (v) { + case 2: + v = 1; + break; + case 4: + v = 2; + break; + case 8: + v = 3; + break; + default: + dev_err(dev, + "fan_div value %lu not supported. Choose one of 2, 4 or 8!\n", + v); + return -EINVAL; + } + + mutex_lock(&data->update_lock); + + reg = i2c_smbus_read_byte_data(to_i2c_client(dev), + FSCHMD_REG_FAN_RIPPLE[data->kind][index]); + + /* bits 2..7 reserved => mask with 0x03 */ + reg &= ~0x03; + reg |= v; + + i2c_smbus_write_byte_data(to_i2c_client(dev), + FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg); + + data->fan_ripple[index] = reg; + + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t fan_alarm_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->fan_status[index] & FSCHMD_FAN_ALARM) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static ssize_t fan_fault_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + + +static ssize_t pwm_auto_point1_pwm_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + int val = data->fan_min[index]; + + /* 0 = allow turning off (except on the syl), 1-255 = 50-100% */ + if (val || data->kind == fscsyl) + val = val / 2 + 128; + + return sprintf(buf, "%d\n", val); +} + +static ssize_t pwm_auto_point1_pwm_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = dev_get_drvdata(dev); + unsigned long v; + int err; + + err = kstrtoul(buf, 10, &v); + if (err) + return err; + + /* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */ + if (v || data->kind == fscsyl) { + v = clamp_val(v, 128, 255); + v = (v - 128) * 2 + 1; + } + + mutex_lock(&data->update_lock); + + i2c_smbus_write_byte_data(to_i2c_client(dev), + FSCHMD_REG_FAN_MIN[data->kind][index], v); + data->fan_min[index] = v; + + mutex_unlock(&data->update_lock); + + return count; +} + + +/* + * The FSC hwmon family has the ability to force an attached alert led to flash + * from software, we export this as an alert_led sysfs attr + */ +static ssize_t alert_led_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->global_control & FSCHMD_CONTROL_ALERT_LED) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static ssize_t alert_led_store(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + u8 reg; + struct fschmd_data *data = dev_get_drvdata(dev); + unsigned long v; + int err; + + err = kstrtoul(buf, 10, &v); + if (err) + return err; + + mutex_lock(&data->update_lock); + + reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL); + + if (v) + reg |= FSCHMD_CONTROL_ALERT_LED; + else + reg &= ~FSCHMD_CONTROL_ALERT_LED; + + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg); + + data->global_control = reg; + + mutex_unlock(&data->update_lock); + + return count; +} + +static DEVICE_ATTR_RW(alert_led); + +static struct sensor_device_attribute fschmd_attr[] = { + SENSOR_ATTR_RO(in0_input, in_value, 0), + SENSOR_ATTR_RO(in1_input, in_value, 1), + SENSOR_ATTR_RO(in2_input, in_value, 2), + SENSOR_ATTR_RO(in3_input, in_value, 3), + SENSOR_ATTR_RO(in4_input, in_value, 4), + SENSOR_ATTR_RO(in5_input, in_value, 5), +}; + +static struct sensor_device_attribute fschmd_temp_attr[] = { + SENSOR_ATTR_RO(temp1_input, temp_value, 0), + SENSOR_ATTR_RW(temp1_max, temp_max, 0), + SENSOR_ATTR_RO(temp1_fault, temp_fault, 0), + SENSOR_ATTR_RO(temp1_alarm, temp_alarm, 0), + SENSOR_ATTR_RO(temp2_input, temp_value, 1), + SENSOR_ATTR_RW(temp2_max, temp_max, 1), + SENSOR_ATTR_RO(temp2_fault, temp_fault, 1), + SENSOR_ATTR_RO(temp2_alarm, temp_alarm, 1), + SENSOR_ATTR_RO(temp3_input, temp_value, 2), + SENSOR_ATTR_RW(temp3_max, temp_max, 2), + SENSOR_ATTR_RO(temp3_fault, temp_fault, 2), + SENSOR_ATTR_RO(temp3_alarm, temp_alarm, 2), + SENSOR_ATTR_RO(temp4_input, temp_value, 3), + SENSOR_ATTR_RW(temp4_max, temp_max, 3), + SENSOR_ATTR_RO(temp4_fault, temp_fault, 3), + SENSOR_ATTR_RO(temp4_alarm, temp_alarm, 3), + SENSOR_ATTR_RO(temp5_input, temp_value, 4), + SENSOR_ATTR_RW(temp5_max, temp_max, 4), + SENSOR_ATTR_RO(temp5_fault, temp_fault, 4), + SENSOR_ATTR_RO(temp5_alarm, temp_alarm, 4), + SENSOR_ATTR_RO(temp6_input, temp_value, 5), + SENSOR_ATTR_RW(temp6_max, temp_max, 5), + SENSOR_ATTR_RO(temp6_fault, temp_fault, 5), + SENSOR_ATTR_RO(temp6_alarm, temp_alarm, 5), + SENSOR_ATTR_RO(temp7_input, temp_value, 6), + SENSOR_ATTR_RW(temp7_max, temp_max, 6), + SENSOR_ATTR_RO(temp7_fault, temp_fault, 6), + SENSOR_ATTR_RO(temp7_alarm, temp_alarm, 6), + SENSOR_ATTR_RO(temp8_input, temp_value, 7), + SENSOR_ATTR_RW(temp8_max, temp_max, 7), + SENSOR_ATTR_RO(temp8_fault, temp_fault, 7), + SENSOR_ATTR_RO(temp8_alarm, temp_alarm, 7), + SENSOR_ATTR_RO(temp9_input, temp_value, 8), + SENSOR_ATTR_RW(temp9_max, temp_max, 8), + SENSOR_ATTR_RO(temp9_fault, temp_fault, 8), + SENSOR_ATTR_RO(temp9_alarm, temp_alarm, 8), + SENSOR_ATTR_RO(temp10_input, temp_value, 9), + SENSOR_ATTR_RW(temp10_max, temp_max, 9), + SENSOR_ATTR_RO(temp10_fault, temp_fault, 9), + SENSOR_ATTR_RO(temp10_alarm, temp_alarm, 9), + SENSOR_ATTR_RO(temp11_input, temp_value, 10), + SENSOR_ATTR_RW(temp11_max, temp_max, 10), + SENSOR_ATTR_RO(temp11_fault, temp_fault, 10), + SENSOR_ATTR_RO(temp11_alarm, temp_alarm, 10), +}; + +static struct sensor_device_attribute fschmd_fan_attr[] = { + SENSOR_ATTR_RO(fan1_input, fan_value, 0), + SENSOR_ATTR_RW(fan1_div, fan_div, 0), + SENSOR_ATTR_RO(fan1_alarm, fan_alarm, 0), + SENSOR_ATTR_RO(fan1_fault, fan_fault, 0), + SENSOR_ATTR_RW(pwm1_auto_point1_pwm, pwm_auto_point1_pwm, 0), + SENSOR_ATTR_RO(fan2_input, fan_value, 1), + SENSOR_ATTR_RW(fan2_div, fan_div, 1), + SENSOR_ATTR_RO(fan2_alarm, fan_alarm, 1), + SENSOR_ATTR_RO(fan2_fault, fan_fault, 1), + SENSOR_ATTR_RW(pwm2_auto_point1_pwm, pwm_auto_point1_pwm, 1), + SENSOR_ATTR_RO(fan3_input, fan_value, 2), + SENSOR_ATTR_RW(fan3_div, fan_div, 2), + SENSOR_ATTR_RO(fan3_alarm, fan_alarm, 2), + SENSOR_ATTR_RO(fan3_fault, fan_fault, 2), + SENSOR_ATTR_RW(pwm3_auto_point1_pwm, pwm_auto_point1_pwm, 2), + SENSOR_ATTR_RO(fan4_input, fan_value, 3), + SENSOR_ATTR_RW(fan4_div, fan_div, 3), + SENSOR_ATTR_RO(fan4_alarm, fan_alarm, 3), + SENSOR_ATTR_RO(fan4_fault, fan_fault, 3), + SENSOR_ATTR_RW(pwm4_auto_point1_pwm, pwm_auto_point1_pwm, 3), + SENSOR_ATTR_RO(fan5_input, fan_value, 4), + SENSOR_ATTR_RW(fan5_div, fan_div, 4), + SENSOR_ATTR_RO(fan5_alarm, fan_alarm, 4), + SENSOR_ATTR_RO(fan5_fault, fan_fault, 4), + SENSOR_ATTR_RW(pwm5_auto_point1_pwm, pwm_auto_point1_pwm, 4), + SENSOR_ATTR_RO(fan6_input, fan_value, 5), + SENSOR_ATTR_RW(fan6_div, fan_div, 5), + SENSOR_ATTR_RO(fan6_alarm, fan_alarm, 5), + SENSOR_ATTR_RO(fan6_fault, fan_fault, 5), + SENSOR_ATTR_RW(pwm6_auto_point1_pwm, pwm_auto_point1_pwm, 5), + SENSOR_ATTR_RO(fan7_input, fan_value, 6), + SENSOR_ATTR_RW(fan7_div, fan_div, 6), + SENSOR_ATTR_RO(fan7_alarm, fan_alarm, 6), + SENSOR_ATTR_RO(fan7_fault, fan_fault, 6), + SENSOR_ATTR_RW(pwm7_auto_point1_pwm, pwm_auto_point1_pwm, 6), +}; + + +/* + * Watchdog routines + */ + +static int watchdog_set_timeout(struct fschmd_data *data, int timeout) +{ + int ret, resolution; + int kind = data->kind + 1; /* 0-x array index -> 1-x module param */ + + /* 2 second or 60 second resolution? */ + if (timeout <= 510 || kind == fscpos || kind == fscscy) + resolution = 2; + else + resolution = 60; + + if (timeout < resolution || timeout > (resolution * 255)) + return -EINVAL; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + if (resolution == 2) + data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION; + else + data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION; + + data->watchdog_preset = DIV_ROUND_UP(timeout, resolution); + + /* Write new timeout value */ + i2c_smbus_write_byte_data(data->client, + FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset); + /* Write new control register, do not trigger! */ + i2c_smbus_write_byte_data(data->client, + FSCHMD_REG_WDOG_CONTROL[data->kind], + data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER); + + ret = data->watchdog_preset * resolution; + +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_get_timeout(struct fschmd_data *data) +{ + int timeout; + + mutex_lock(&data->watchdog_lock); + if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION) + timeout = data->watchdog_preset * 60; + else + timeout = data->watchdog_preset * 2; + mutex_unlock(&data->watchdog_lock); + + return timeout; +} + +static int watchdog_trigger(struct fschmd_data *data) +{ + int ret = 0; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER; + i2c_smbus_write_byte_data(data->client, + FSCHMD_REG_WDOG_CONTROL[data->kind], + data->watchdog_control); +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_stop(struct fschmd_data *data) +{ + int ret = 0; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED; + /* + * Don't store the stop flag in our watchdog control register copy, as + * its a write only bit (read always returns 0) + */ + i2c_smbus_write_byte_data(data->client, + FSCHMD_REG_WDOG_CONTROL[data->kind], + data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP); +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_open(struct inode *inode, struct file *filp) +{ + struct fschmd_data *pos, *data = NULL; + int watchdog_is_open; + + /* + * We get called from drivers/char/misc.c with misc_mtx hold, and we + * call misc_register() from fschmd_probe() with watchdog_data_mutex + * hold, as misc_register() takes the misc_mtx lock, this is a possible + * deadlock, so we use mutex_trylock here. + */ + if (!mutex_trylock(&watchdog_data_mutex)) + return -ERESTARTSYS; + list_for_each_entry(pos, &watchdog_data_list, list) { + if (pos->watchdog_miscdev.minor == iminor(inode)) { + data = pos; + break; + } + } + /* Note we can never not have found data, so we don't check for this */ + watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open); + if (!watchdog_is_open) + kref_get(&data->kref); + mutex_unlock(&watchdog_data_mutex); + + if (watchdog_is_open) + return -EBUSY; + + /* Start the watchdog */ + watchdog_trigger(data); + filp->private_data = data; + + return stream_open(inode, filp); +} + +static int watchdog_release(struct inode *inode, struct file *filp) +{ + struct fschmd_data *data = filp->private_data; + + if (data->watchdog_expect_close) { + watchdog_stop(data); + data->watchdog_expect_close = 0; + } else { + watchdog_trigger(data); + dev_crit(&data->client->dev, + "unexpected close, not stopping watchdog!\n"); + } + + clear_bit(0, &data->watchdog_is_open); + + mutex_lock(&watchdog_data_mutex); + kref_put(&data->kref, fschmd_release_resources); + mutex_unlock(&watchdog_data_mutex); + + return 0; +} + +static ssize_t watchdog_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offset) +{ + int ret; + struct fschmd_data *data = filp->private_data; + + if (count) { + if (!nowayout) { + size_t i; + + /* Clear it in case it was set with a previous write */ + data->watchdog_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + data->watchdog_expect_close = 1; + } + } + ret = watchdog_trigger(data); + if (ret < 0) + return ret; + } + return count; +} + +static long watchdog_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_CARDRESET, + .identity = "FSC watchdog" + }; + int i, ret = 0; + struct fschmd_data *data = filp->private_data; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ident.firmware_version = data->revision; + if (!nowayout) + ident.options |= WDIOF_MAGICCLOSE; + if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) + ret = -EFAULT; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET) + ret = put_user(WDIOF_CARDRESET, (int __user *)arg); + else + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_KEEPALIVE: + ret = watchdog_trigger(data); + break; + + case WDIOC_GETTIMEOUT: + i = watchdog_get_timeout(data); + ret = put_user(i, (int __user *)arg); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(i, (int __user *)arg)) { + ret = -EFAULT; + break; + } + ret = watchdog_set_timeout(data, i); + if (ret > 0) + ret = put_user(ret, (int __user *)arg); + break; + + case WDIOC_SETOPTIONS: + if (get_user(i, (int __user *)arg)) { + ret = -EFAULT; + break; + } + + if (i & WDIOS_DISABLECARD) + ret = watchdog_stop(data); + else if (i & WDIOS_ENABLECARD) + ret = watchdog_trigger(data); + else + ret = -EINVAL; + + break; + default: + ret = -ENOTTY; + } + return ret; +} + +static const struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = watchdog_open, + .release = watchdog_release, + .write = watchdog_write, + .unlocked_ioctl = watchdog_ioctl, + .compat_ioctl = compat_ptr_ioctl, +}; + + +/* + * Detect, register, unregister and update device functions + */ + +/* + * DMI decode routine to read voltage scaling factors from special DMI tables, + * which are available on FSC machines with an fscher or later chip. + */ +static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy) +{ + int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0; + + /* + * dmi code ugliness, we get passed the address of the contents of + * a complete DMI record, but in the form of a dmi_header pointer, in + * reality this address holds header->length bytes of which the header + * are the first 4 bytes + */ + u8 *dmi_data = (u8 *)header; + + /* We are looking for OEM-specific type 185 */ + if (header->type != 185) + return; + + /* + * we are looking for what Siemens calls "subtype" 19, the subtype + * is stored in byte 5 of the dmi block + */ + if (header->length < 5 || dmi_data[4] != 19) + return; + + /* + * After the subtype comes 1 unknown byte and then blocks of 5 bytes, + * consisting of what Siemens calls an "Entity" number, followed by + * 2 16-bit words in LSB first order + */ + for (i = 6; (i + 4) < header->length; i += 5) { + /* entity 1 - 3: voltage multiplier and offset */ + if (dmi_data[i] >= 1 && dmi_data[i] <= 3) { + /* Our in sensors order and the DMI order differ */ + const int shuffle[3] = { 1, 0, 2 }; + int in = shuffle[dmi_data[i] - 1]; + + /* Check for twice the same entity */ + if (found & (1 << in)) + return; + + mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8); + offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8); + + found |= 1 << in; + } + + /* entity 7: reference voltage */ + if (dmi_data[i] == 7) { + /* Check for twice the same entity */ + if (found & 0x08) + return; + + vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8); + + found |= 0x08; + } + } + + if (found == 0x0F) { + for (i = 0; i < 3; i++) { + dmi_mult[i] = mult[i] * 10; + dmi_offset[i] = offset[i] * 10; + } + /* + * According to the docs there should be separate dmi entries + * for the mult's and offsets of in3-5 of the syl, but on + * my test machine these are not present + */ + dmi_mult[3] = dmi_mult[2]; + dmi_mult[4] = dmi_mult[1]; + dmi_mult[5] = dmi_mult[2]; + dmi_offset[3] = dmi_offset[2]; + dmi_offset[4] = dmi_offset[1]; + dmi_offset[5] = dmi_offset[2]; + dmi_vref = vref; + } +} + +static int fschmd_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + enum chips kind; + struct i2c_adapter *adapter = client->adapter; + char id[4]; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + /* Detect & Identify the chip */ + id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0); + id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1); + id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2); + id[3] = '\0'; + + if (!strcmp(id, "PEG")) + kind = fscpos; + else if (!strcmp(id, "HER")) + kind = fscher; + else if (!strcmp(id, "SCY")) + kind = fscscy; + else if (!strcmp(id, "HRC")) + kind = fschrc; + else if (!strcmp(id, "HMD")) + kind = fschmd; + else if (!strcmp(id, "HDS")) + kind = fschds; + else if (!strcmp(id, "SYL")) + kind = fscsyl; + else + return -ENODEV; + + strscpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE); + + return 0; +} + +static int fschmd_probe(struct i2c_client *client) +{ + struct fschmd_data *data; + static const char * const names[7] = { "Poseidon", "Hermes", "Scylla", + "Heracles", "Heimdall", "Hades", "Syleus" }; + static const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 }; + int i, err; + enum chips kind = i2c_match_id(fschmd_id, client)->driver_data; + + data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + mutex_init(&data->watchdog_lock); + INIT_LIST_HEAD(&data->list); + kref_init(&data->kref); + /* + * Store client pointer in our data struct for watchdog usage + * (where the client is found through a data ptr instead of the + * otherway around) + */ + data->client = client; + data->kind = kind; + + if (kind == fscpos) { + /* + * The Poseidon has hardwired temp limits, fill these + * in for the alarm resetting code + */ + data->temp_max[0] = 70 + 128; + data->temp_max[1] = 50 + 128; + data->temp_max[2] = 50 + 128; + } + + /* Read the special DMI table for fscher and newer chips */ + if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) { + dmi_walk(fschmd_dmi_decode, NULL); + if (dmi_vref == -1) { + dev_warn(&client->dev, + "Couldn't get voltage scaling factors from " + "BIOS DMI table, using builtin defaults\n"); + dmi_vref = 33; + } + } + + /* Read in some never changing registers */ + data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); + data->global_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_CONTROL); + data->watchdog_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_CONTROL[data->kind]); + data->watchdog_state = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_STATE[data->kind]); + data->watchdog_preset = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_PRESET[data->kind]); + + err = device_create_file(&client->dev, &dev_attr_alert_led); + if (err) + goto exit_detach; + + for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) { + err = device_create_file(&client->dev, + &fschmd_attr[i].dev_attr); + if (err) + goto exit_detach; + } + + for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) { + /* Poseidon doesn't have TEMP_LIMIT registers */ + if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show == + temp_max_show) + continue; + + if (kind == fscsyl) { + if (i % 4 == 0) + data->temp_status[i / 4] = + i2c_smbus_read_byte_data(client, + FSCHMD_REG_TEMP_STATE + [data->kind][i / 4]); + if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED) + continue; + } + + err = device_create_file(&client->dev, + &fschmd_temp_attr[i].dev_attr); + if (err) + goto exit_detach; + } + + for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) { + /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */ + if (kind == fscpos && + !strcmp(fschmd_fan_attr[i].dev_attr.attr.name, + "pwm3_auto_point1_pwm")) + continue; + + if (kind == fscsyl) { + if (i % 5 == 0) + data->fan_status[i / 5] = + i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_STATE + [data->kind][i / 5]); + if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED) + continue; + } + + err = device_create_file(&client->dev, + &fschmd_fan_attr[i].dev_attr); + if (err) + goto exit_detach; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; + goto exit_detach; + } + + /* + * We take the data_mutex lock early so that watchdog_open() cannot + * run when misc_register() has completed, but we've not yet added + * our data to the watchdog_data_list (and set the default timeout) + */ + mutex_lock(&watchdog_data_mutex); + for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) { + /* Register our watchdog part */ + snprintf(data->watchdog_name, sizeof(data->watchdog_name), + "watchdog%c", (i == 0) ? '\0' : ('0' + i)); + data->watchdog_miscdev.name = data->watchdog_name; + data->watchdog_miscdev.fops = &watchdog_fops; + data->watchdog_miscdev.minor = watchdog_minors[i]; + err = misc_register(&data->watchdog_miscdev); + if (err == -EBUSY) + continue; + if (err) { + data->watchdog_miscdev.minor = 0; + dev_err(&client->dev, + "Registering watchdog chardev: %d\n", err); + break; + } + + list_add(&data->list, &watchdog_data_list); + watchdog_set_timeout(data, 60); + dev_info(&client->dev, + "Registered watchdog chardev major 10, minor: %d\n", + watchdog_minors[i]); + break; + } + if (i == ARRAY_SIZE(watchdog_minors)) { + data->watchdog_miscdev.minor = 0; + dev_warn(&client->dev, + "Couldn't register watchdog chardev (due to no free minor)\n"); + } + mutex_unlock(&watchdog_data_mutex); + + dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n", + names[data->kind], (int) data->revision); + + return 0; + +exit_detach: + fschmd_remove(client); /* will also free data for us */ + return err; +} + +static void fschmd_remove(struct i2c_client *client) +{ + struct fschmd_data *data = i2c_get_clientdata(client); + int i; + + /* Unregister the watchdog (if registered) */ + if (data->watchdog_miscdev.minor) { + misc_deregister(&data->watchdog_miscdev); + if (data->watchdog_is_open) { + dev_warn(&client->dev, + "i2c client detached with watchdog open! " + "Stopping watchdog.\n"); + watchdog_stop(data); + } + mutex_lock(&watchdog_data_mutex); + list_del(&data->list); + mutex_unlock(&watchdog_data_mutex); + /* Tell the watchdog code the client is gone */ + mutex_lock(&data->watchdog_lock); + data->client = NULL; + mutex_unlock(&data->watchdog_lock); + } + + /* + * Check if registered in case we're called from fschmd_detect + * to cleanup after an error + */ + if (data->hwmon_dev) + hwmon_device_unregister(data->hwmon_dev); + + device_remove_file(&client->dev, &dev_attr_alert_led); + for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++) + device_remove_file(&client->dev, &fschmd_attr[i].dev_attr); + for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) + device_remove_file(&client->dev, + &fschmd_temp_attr[i].dev_attr); + for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) + device_remove_file(&client->dev, + &fschmd_fan_attr[i].dev_attr); + + mutex_lock(&watchdog_data_mutex); + kref_put(&data->kref, fschmd_release_resources); + mutex_unlock(&watchdog_data_mutex); +} + +static struct fschmd_data *fschmd_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct fschmd_data *data = i2c_get_clientdata(client); + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { + + for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) { + data->temp_act[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_TEMP_ACT[data->kind][i]); + data->temp_status[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_TEMP_STATE[data->kind][i]); + + /* The fscpos doesn't have TEMP_LIMIT registers */ + if (FSCHMD_REG_TEMP_LIMIT[data->kind][i]) + data->temp_max[i] = i2c_smbus_read_byte_data( + client, + FSCHMD_REG_TEMP_LIMIT[data->kind][i]); + + /* + * reset alarm if the alarm condition is gone, + * the chip doesn't do this itself + */ + if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) == + FSCHMD_TEMP_ALARM_MASK && + data->temp_act[i] < data->temp_max[i]) + i2c_smbus_write_byte_data(client, + FSCHMD_REG_TEMP_STATE[data->kind][i], + data->temp_status[i]); + } + + for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) { + data->fan_act[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_ACT[data->kind][i]); + data->fan_status[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_STATE[data->kind][i]); + data->fan_ripple[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_RIPPLE[data->kind][i]); + + /* The fscpos third fan doesn't have a fan_min */ + if (FSCHMD_REG_FAN_MIN[data->kind][i]) + data->fan_min[i] = i2c_smbus_read_byte_data( + client, + FSCHMD_REG_FAN_MIN[data->kind][i]); + + /* reset fan status if speed is back to > 0 */ + if ((data->fan_status[i] & FSCHMD_FAN_ALARM) && + data->fan_act[i]) + i2c_smbus_write_byte_data(client, + FSCHMD_REG_FAN_STATE[data->kind][i], + data->fan_status[i]); + } + + for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) + data->volt[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_VOLT[data->kind][i]); + + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(fschmd_driver); + +MODULE_AUTHOR("Hans de Goede "); +MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades " + "and Syleus driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3