From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/i2c/busses/i2c-ocores.c | 792 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 792 insertions(+) create mode 100644 drivers/i2c/busses/i2c-ocores.c (limited to 'drivers/i2c/busses/i2c-ocores.c') diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c new file mode 100644 index 0000000000..e106af83ce --- /dev/null +++ b/drivers/i2c/busses/i2c-ocores.c @@ -0,0 +1,792 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * i2c-ocores.c: I2C bus driver for OpenCores I2C controller + * (https://opencores.org/project/i2c/overview) + * + * Peter Korsgaard + * + * Support for the GRLIB port of the controller by + * Andreas Larsson + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * 'process_lock' exists because ocores_process() and ocores_process_timeout() + * can't run in parallel. + */ +struct ocores_i2c { + void __iomem *base; + int iobase; + u32 reg_shift; + u32 reg_io_width; + unsigned long flags; + wait_queue_head_t wait; + struct i2c_adapter adap; + struct i2c_msg *msg; + int pos; + int nmsgs; + int state; /* see STATE_ */ + spinlock_t process_lock; + struct clk *clk; + int ip_clock_khz; + int bus_clock_khz; + void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value); + u8 (*getreg)(struct ocores_i2c *i2c, int reg); +}; + +/* registers */ +#define OCI2C_PRELOW 0 +#define OCI2C_PREHIGH 1 +#define OCI2C_CONTROL 2 +#define OCI2C_DATA 3 +#define OCI2C_CMD 4 /* write only */ +#define OCI2C_STATUS 4 /* read only, same address as OCI2C_CMD */ + +#define OCI2C_CTRL_IEN 0x40 +#define OCI2C_CTRL_EN 0x80 + +#define OCI2C_CMD_START 0x91 +#define OCI2C_CMD_STOP 0x41 +#define OCI2C_CMD_READ 0x21 +#define OCI2C_CMD_WRITE 0x11 +#define OCI2C_CMD_READ_ACK 0x21 +#define OCI2C_CMD_READ_NACK 0x29 +#define OCI2C_CMD_IACK 0x01 + +#define OCI2C_STAT_IF 0x01 +#define OCI2C_STAT_TIP 0x02 +#define OCI2C_STAT_ARBLOST 0x20 +#define OCI2C_STAT_BUSY 0x40 +#define OCI2C_STAT_NACK 0x80 + +#define STATE_DONE 0 +#define STATE_START 1 +#define STATE_WRITE 2 +#define STATE_READ 3 +#define STATE_ERROR 4 + +#define TYPE_OCORES 0 +#define TYPE_GRLIB 1 + +#define OCORES_FLAG_BROKEN_IRQ BIT(1) /* Broken IRQ for FU540-C000 SoC */ + +static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite8(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_16(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite16(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite32(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite16be(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite32be(value, i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg) +{ + return ioread8(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_16(struct ocores_i2c *i2c, int reg) +{ + return ioread16(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg) +{ + return ioread32(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg) +{ + return ioread16be(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg) +{ + return ioread32be(i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_io_8(struct ocores_i2c *i2c, int reg, u8 value) +{ + outb(value, i2c->iobase + reg); +} + +static inline u8 oc_getreg_io_8(struct ocores_i2c *i2c, int reg) +{ + return inb(i2c->iobase + reg); +} + +static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) +{ + i2c->setreg(i2c, reg, value); +} + +static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg) +{ + return i2c->getreg(i2c, reg); +} + +static void ocores_process(struct ocores_i2c *i2c, u8 stat) +{ + struct i2c_msg *msg = i2c->msg; + unsigned long flags; + + /* + * If we spin here is because we are in timeout, so we are going + * to be in STATE_ERROR. See ocores_process_timeout() + */ + spin_lock_irqsave(&i2c->process_lock, flags); + + if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) { + /* stop has been sent */ + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); + wake_up(&i2c->wait); + goto out; + } + + /* error? */ + if (stat & OCI2C_STAT_ARBLOST) { + i2c->state = STATE_ERROR; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + goto out; + } + + if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) { + i2c->state = + (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; + + if (stat & OCI2C_STAT_NACK) { + i2c->state = STATE_ERROR; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + goto out; + } + } else { + msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA); + } + + /* end of msg? */ + if (i2c->pos == msg->len) { + i2c->nmsgs--; + i2c->msg++; + i2c->pos = 0; + msg = i2c->msg; + + if (i2c->nmsgs) { /* end? */ + /* send start? */ + if (!(msg->flags & I2C_M_NOSTART)) { + u8 addr = i2c_8bit_addr_from_msg(msg); + + i2c->state = STATE_START; + + oc_setreg(i2c, OCI2C_DATA, addr); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); + goto out; + } + i2c->state = (msg->flags & I2C_M_RD) + ? STATE_READ : STATE_WRITE; + } else { + i2c->state = STATE_DONE; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + goto out; + } + } + + if (i2c->state == STATE_READ) { + oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ? + OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK); + } else { + oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); + } + +out: + spin_unlock_irqrestore(&i2c->process_lock, flags); +} + +static irqreturn_t ocores_isr(int irq, void *dev_id) +{ + struct ocores_i2c *i2c = dev_id; + u8 stat = oc_getreg(i2c, OCI2C_STATUS); + + if (i2c->flags & OCORES_FLAG_BROKEN_IRQ) { + if ((stat & OCI2C_STAT_IF) && !(stat & OCI2C_STAT_BUSY)) + return IRQ_NONE; + } else if (!(stat & OCI2C_STAT_IF)) { + return IRQ_NONE; + } + ocores_process(i2c, stat); + + return IRQ_HANDLED; +} + +/** + * ocores_process_timeout() - Process timeout event + * @i2c: ocores I2C device instance + */ +static void ocores_process_timeout(struct ocores_i2c *i2c) +{ + unsigned long flags; + + spin_lock_irqsave(&i2c->process_lock, flags); + i2c->state = STATE_ERROR; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + spin_unlock_irqrestore(&i2c->process_lock, flags); +} + +/** + * ocores_wait() - Wait until something change in a given register + * @i2c: ocores I2C device instance + * @reg: register to query + * @mask: bitmask to apply on register value + * @val: expected result + * @timeout: timeout in jiffies + * + * Timeout is necessary to avoid to stay here forever when the chip + * does not answer correctly. + * + * Return: 0 on success, -ETIMEDOUT on timeout + */ +static int ocores_wait(struct ocores_i2c *i2c, + int reg, u8 mask, u8 val, + const unsigned long timeout) +{ + unsigned long j; + + j = jiffies + timeout; + while (1) { + u8 status = oc_getreg(i2c, reg); + + if ((status & mask) == val) + break; + + if (time_after(jiffies, j)) + return -ETIMEDOUT; + } + return 0; +} + +/** + * ocores_poll_wait() - Wait until is possible to process some data + * @i2c: ocores I2C device instance + * + * Used when the device is in polling mode (interrupts disabled). + * + * Return: 0 on success, -ETIMEDOUT on timeout + */ +static int ocores_poll_wait(struct ocores_i2c *i2c) +{ + u8 mask; + int err; + + if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) { + /* transfer is over */ + mask = OCI2C_STAT_BUSY; + } else { + /* on going transfer */ + mask = OCI2C_STAT_TIP; + /* + * We wait for the data to be transferred (8bit), + * then we start polling on the ACK/NACK bit + */ + udelay((8 * 1000) / i2c->bus_clock_khz); + } + + /* + * once we are here we expect to get the expected result immediately + * so if after 1ms we timeout then something is broken. + */ + err = ocores_wait(i2c, OCI2C_STATUS, mask, 0, msecs_to_jiffies(1)); + if (err) + dev_warn(i2c->adap.dev.parent, + "%s: STATUS timeout, bit 0x%x did not clear in 1ms\n", + __func__, mask); + return err; +} + +/** + * ocores_process_polling() - It handles an IRQ-less transfer + * @i2c: ocores I2C device instance + * + * Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same + * (only that IRQ are not produced). This means that we can re-use entirely + * ocores_isr(), we just add our polling code around it. + * + * It can run in atomic context + * + * Return: 0 on success, -ETIMEDOUT on timeout + */ +static int ocores_process_polling(struct ocores_i2c *i2c) +{ + irqreturn_t ret; + int err = 0; + + while (1) { + err = ocores_poll_wait(i2c); + if (err) + break; /* timeout */ + + ret = ocores_isr(-1, i2c); + if (ret == IRQ_NONE) + break; /* all messages have been transferred */ + else { + if (i2c->flags & OCORES_FLAG_BROKEN_IRQ) + if (i2c->state == STATE_DONE) + break; + } + } + + return err; +} + +static int ocores_xfer_core(struct ocores_i2c *i2c, + struct i2c_msg *msgs, int num, + bool polling) +{ + int ret = 0; + u8 ctrl; + + ctrl = oc_getreg(i2c, OCI2C_CONTROL); + if (polling) + oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~OCI2C_CTRL_IEN); + else + oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN); + + i2c->msg = msgs; + i2c->pos = 0; + i2c->nmsgs = num; + i2c->state = STATE_START; + + oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg)); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); + + if (polling) { + ret = ocores_process_polling(i2c); + } else { + if (wait_event_timeout(i2c->wait, + (i2c->state == STATE_ERROR) || + (i2c->state == STATE_DONE), HZ) == 0) + ret = -ETIMEDOUT; + } + if (ret) { + ocores_process_timeout(i2c); + return ret; + } + + return (i2c->state == STATE_DONE) ? num : -EIO; +} + +static int ocores_xfer_polling(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + return ocores_xfer_core(i2c_get_adapdata(adap), msgs, num, true); +} + +static int ocores_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + return ocores_xfer_core(i2c_get_adapdata(adap), msgs, num, false); +} + +static int ocores_init(struct device *dev, struct ocores_i2c *i2c) +{ + int prescale; + int diff; + u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); + + /* make sure the device is disabled */ + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl); + + prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1; + prescale = clamp(prescale, 0, 0xffff); + + diff = i2c->ip_clock_khz / (5 * (prescale + 1)) - i2c->bus_clock_khz; + if (abs(diff) > i2c->bus_clock_khz / 10) { + dev_err(dev, + "Unsupported clock settings: core: %d KHz, bus: %d KHz\n", + i2c->ip_clock_khz, i2c->bus_clock_khz); + return -EINVAL; + } + + oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff); + oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8); + + /* Init the device */ + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); + oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN); + + return 0; +} + + +static u32 ocores_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm ocores_algorithm = { + .master_xfer = ocores_xfer, + .master_xfer_atomic = ocores_xfer_polling, + .functionality = ocores_func, +}; + +static const struct i2c_adapter ocores_adapter = { + .owner = THIS_MODULE, + .name = "i2c-ocores", + .class = I2C_CLASS_DEPRECATED, + .algo = &ocores_algorithm, +}; + +static const struct of_device_id ocores_i2c_match[] = { + { + .compatible = "opencores,i2c-ocores", + .data = (void *)TYPE_OCORES, + }, + { + .compatible = "aeroflexgaisler,i2cmst", + .data = (void *)TYPE_GRLIB, + }, + { + .compatible = "sifive,fu540-c000-i2c", + }, + { + .compatible = "sifive,i2c0", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ocores_i2c_match); + +#ifdef CONFIG_OF +/* + * Read and write functions for the GRLIB port of the controller. Registers are + * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one + * register. The subsequent registers have their offsets decreased accordingly. + */ +static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg) +{ + u32 rd; + int rreg = reg; + + if (reg != OCI2C_PRELOW) + rreg--; + rd = ioread32be(i2c->base + (rreg << i2c->reg_shift)); + if (reg == OCI2C_PREHIGH) + return (u8)(rd >> 8); + else + return (u8)rd; +} + +static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value) +{ + u32 curr, wr; + int rreg = reg; + + if (reg != OCI2C_PRELOW) + rreg--; + if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) { + curr = ioread32be(i2c->base + (rreg << i2c->reg_shift)); + if (reg == OCI2C_PRELOW) + wr = (curr & 0xff00) | value; + else + wr = (((u32)value) << 8) | (curr & 0xff); + } else { + wr = value; + } + iowrite32be(wr, i2c->base + (rreg << i2c->reg_shift)); +} + +static int ocores_i2c_of_probe(struct platform_device *pdev, + struct ocores_i2c *i2c) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + u32 val; + u32 clock_frequency; + bool clock_frequency_present; + + if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) { + /* no 'reg-shift', check for deprecated 'regstep' */ + if (!of_property_read_u32(np, "regstep", &val)) { + if (!is_power_of_2(val)) { + dev_err(&pdev->dev, "invalid regstep %d\n", + val); + return -EINVAL; + } + i2c->reg_shift = ilog2(val); + dev_warn(&pdev->dev, + "regstep property deprecated, use reg-shift\n"); + } + } + + clock_frequency_present = !of_property_read_u32(np, "clock-frequency", + &clock_frequency); + i2c->bus_clock_khz = 100; + + i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL); + if (IS_ERR(i2c->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk), + "devm_clk_get_optional_enabled failed\n"); + + i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000; + if (clock_frequency_present) + i2c->bus_clock_khz = clock_frequency / 1000; + if (i2c->ip_clock_khz == 0) { + if (of_property_read_u32(np, "opencores,ip-clock-frequency", + &val)) { + if (!clock_frequency_present) { + dev_err(&pdev->dev, + "Missing required parameter 'opencores,ip-clock-frequency'\n"); + return -ENODEV; + } + i2c->ip_clock_khz = clock_frequency / 1000; + dev_warn(&pdev->dev, + "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n"); + } else { + i2c->ip_clock_khz = val / 1000; + if (clock_frequency_present) + i2c->bus_clock_khz = clock_frequency / 1000; + } + } + + of_property_read_u32(pdev->dev.of_node, "reg-io-width", + &i2c->reg_io_width); + + match = of_match_node(ocores_i2c_match, pdev->dev.of_node); + if (match && (long)match->data == TYPE_GRLIB) { + dev_dbg(&pdev->dev, "GRLIB variant of i2c-ocores\n"); + i2c->setreg = oc_setreg_grlib; + i2c->getreg = oc_getreg_grlib; + } + + return 0; +} +#else +#define ocores_i2c_of_probe(pdev, i2c) -ENODEV +#endif + +static int ocores_i2c_probe(struct platform_device *pdev) +{ + struct ocores_i2c *i2c; + struct ocores_i2c_platform_data *pdata; + struct resource *res; + int irq; + int ret; + int i; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + spin_lock_init(&i2c->process_lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) { + i2c->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c->base)) + return PTR_ERR(i2c->base); + } else { + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) + return -EINVAL; + i2c->iobase = res->start; + if (!devm_request_region(&pdev->dev, res->start, + resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "Can't get I/O resource.\n"); + return -EBUSY; + } + i2c->setreg = oc_setreg_io_8; + i2c->getreg = oc_getreg_io_8; + } + + pdata = dev_get_platdata(&pdev->dev); + if (pdata) { + i2c->reg_shift = pdata->reg_shift; + i2c->reg_io_width = pdata->reg_io_width; + i2c->ip_clock_khz = pdata->clock_khz; + if (pdata->bus_khz) + i2c->bus_clock_khz = pdata->bus_khz; + else + i2c->bus_clock_khz = 100; + } else { + ret = ocores_i2c_of_probe(pdev, i2c); + if (ret) + return ret; + } + + if (i2c->reg_io_width == 0) + i2c->reg_io_width = 1; /* Set to default value */ + + if (!i2c->setreg || !i2c->getreg) { + bool be = pdata ? pdata->big_endian : + of_device_is_big_endian(pdev->dev.of_node); + + switch (i2c->reg_io_width) { + case 1: + i2c->setreg = oc_setreg_8; + i2c->getreg = oc_getreg_8; + break; + + case 2: + i2c->setreg = be ? oc_setreg_16be : oc_setreg_16; + i2c->getreg = be ? oc_getreg_16be : oc_getreg_16; + break; + + case 4: + i2c->setreg = be ? oc_setreg_32be : oc_setreg_32; + i2c->getreg = be ? oc_getreg_32be : oc_getreg_32; + break; + + default: + dev_err(&pdev->dev, "Unsupported I/O width (%d)\n", + i2c->reg_io_width); + return -EINVAL; + } + } + + init_waitqueue_head(&i2c->wait); + + irq = platform_get_irq_optional(pdev, 0); + /* + * Since the SoC does have an interrupt, its DT has an interrupt + * property - But this should be bypassed as the IRQ logic in this + * SoC is broken. + */ + if (of_device_is_compatible(pdev->dev.of_node, + "sifive,fu540-c000-i2c")) { + i2c->flags |= OCORES_FLAG_BROKEN_IRQ; + irq = -ENXIO; + } + + if (irq == -ENXIO) { + ocores_algorithm.master_xfer = ocores_xfer_polling; + } else { + if (irq < 0) + return irq; + } + + if (ocores_algorithm.master_xfer != ocores_xfer_polling) { + ret = devm_request_any_context_irq(&pdev->dev, irq, + ocores_isr, 0, + pdev->name, i2c); + if (ret) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + return ret; + } + } + + ret = ocores_init(&pdev->dev, i2c); + if (ret) + return ret; + + /* hook up driver to tree */ + platform_set_drvdata(pdev, i2c); + i2c->adap = ocores_adapter; + i2c_set_adapdata(&i2c->adap, i2c); + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = pdev->dev.of_node; + + /* add i2c adapter to i2c tree */ + ret = i2c_add_adapter(&i2c->adap); + if (ret) + return ret; + + /* add in known devices to the bus */ + if (pdata) { + for (i = 0; i < pdata->num_devices; i++) + i2c_new_client_device(&i2c->adap, pdata->devices + i); + } + + return 0; +} + +static void ocores_i2c_remove(struct platform_device *pdev) +{ + struct ocores_i2c *i2c = platform_get_drvdata(pdev); + u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); + + /* disable i2c logic */ + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl); + + /* remove adapter & data */ + i2c_del_adapter(&i2c->adap); +} + +static int ocores_i2c_suspend(struct device *dev) +{ + struct ocores_i2c *i2c = dev_get_drvdata(dev); + u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); + + /* make sure the device is disabled */ + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN); + oc_setreg(i2c, OCI2C_CONTROL, ctrl); + + clk_disable_unprepare(i2c->clk); + return 0; +} + +static int ocores_i2c_resume(struct device *dev) +{ + struct ocores_i2c *i2c = dev_get_drvdata(dev); + unsigned long rate; + int ret; + + ret = clk_prepare_enable(i2c->clk); + if (ret) + return dev_err_probe(dev, ret, "clk_prepare_enable failed\n"); + rate = clk_get_rate(i2c->clk) / 1000; + if (rate) + i2c->ip_clock_khz = rate; + return ocores_init(dev, i2c); +} + +static DEFINE_NOIRQ_DEV_PM_OPS(ocores_i2c_pm, + ocores_i2c_suspend, ocores_i2c_resume); + +static struct platform_driver ocores_i2c_driver = { + .probe = ocores_i2c_probe, + .remove_new = ocores_i2c_remove, + .driver = { + .name = "ocores-i2c", + .of_match_table = ocores_i2c_match, + .pm = pm_sleep_ptr(&ocores_i2c_pm), + }, +}; + +module_platform_driver(ocores_i2c_driver); + +MODULE_AUTHOR("Peter Korsgaard "); +MODULE_DESCRIPTION("OpenCores I2C bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ocores-i2c"); -- cgit v1.2.3