From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/iio/chemical/Kconfig | 205 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 drivers/iio/chemical/Kconfig (limited to 'drivers/iio/chemical/Kconfig') diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig new file mode 100644 index 0000000000..c30657e10e --- /dev/null +++ b/drivers/iio/chemical/Kconfig @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Chemical sensors +# + +menu "Chemical Sensors" + +config ATLAS_PH_SENSOR + tristate "Atlas Scientific OEM SM sensors" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here to build I2C interface support for the following + Atlas Scientific OEM SM sensors: + * pH SM sensor + * EC SM sensor + * ORP SM sensor + + To compile this driver as module, choose M here: the + module will be called atlas-ph-sensor. + +config ATLAS_EZO_SENSOR + tristate "Atlas Scientific EZO sensors" + depends on I2C + help + Say Y here to build I2C interface support for the following + Atlas Scientific EZO sensors + * CO2 EZO Sensor + + To compile this driver as module, choose M here: the + module will be called atlas-ezo-sensor. + +config BME680 + tristate "Bosch Sensortec BME680 sensor driver" + depends on (I2C || SPI) + select REGMAP + select BME680_I2C if I2C + select BME680_SPI if SPI + help + Say yes here to build support for Bosch Sensortec BME680 sensor with + temperature, pressure, humidity and gas sensing capability. + + This driver can also be built as a module. If so, the module for I2C + would be called bme680_i2c and bme680_spi for SPI support. + +config BME680_I2C + tristate + depends on I2C && BME680 + select REGMAP_I2C + +config BME680_SPI + tristate + depends on SPI && BME680 + select REGMAP_SPI + +config CCS811 + tristate "AMS CCS811 VOC sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build I2C interface support for the AMS + CCS811 VOC (Volatile Organic Compounds) sensor + +config IAQCORE + tristate "AMS iAQ-Core VOC sensors" + depends on I2C + help + Say Y here to build I2C interface support for the AMS + iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) + sensors + +config PMS7003 + tristate "Plantower PMS7003 particulate matter sensor" + depends on SERIAL_DEV_BUS + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Plantower PMS7003 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called pms7003. + +config SCD30_CORE + tristate "SCD30 carbon dioxide sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Sensirion SCD30 sensor with carbon + dioxide, relative humidity and temperature sensing capabilities. + + To compile this driver as a module, choose M here: the module will + be called scd30_core. + +config SCD30_I2C + tristate "SCD30 carbon dioxide sensor I2C driver" + depends on SCD30_CORE && I2C + select CRC8 + help + Say Y here to build support for the Sensirion SCD30 I2C interface + driver. + + To compile this driver as a module, choose M here: the module will + be called scd30_i2c. + +config SCD30_SERIAL + tristate "SCD30 carbon dioxide sensor serial driver" + depends on SCD30_CORE && SERIAL_DEV_BUS + select CRC16 + help + Say Y here to build support for the Sensirion SCD30 serial interface + driver. + + To compile this driver as a module, choose M here: the module will + be called scd30_serial. + +config SCD4X + tristate "SCD4X carbon dioxide sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + select CRC8 + help + Say Y here to build support for the Sensirion SCD4X sensor with carbon + dioxide, relative humidity and temperature sensing capabilities. + + To compile this driver as a module, choose M here: the module will + be called scd4x. + +config SENSIRION_SGP30 + tristate "Sensirion SGPxx gas sensors" + depends on I2C + select CRC8 + help + Say Y here to build I2C interface support for the following + Sensirion SGP gas sensors: + * SGP30 gas sensor + * SGPC3 low power gas sensor + + To compile this driver as module, choose M here: the + module will be called sgp30. + +config SENSIRION_SGP40 + tristate "Sensirion SGP40 gas sensor" + depends on I2C + select CRC8 + help + Say Y here to build I2C interface to support Sensirion SGP40 gas + sensor + + To compile this driver as module, choose M here: the + module will be called sgp40. + +config SPS30 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SPS30_I2C + tristate "SPS30 particulate matter sensor I2C driver" + depends on I2C + select SPS30 + select CRC8 + help + Say Y here to build support for the Sensirion SPS30 I2C interface + driver. + + To compile this driver as a module, choose M here: the module will + be called sps30_i2c. + +config SPS30_SERIAL + tristate "SPS30 particulate matter sensor serial driver" + depends on SERIAL_DEV_BUS + select SPS30 + help + Say Y here to build support for the Sensirion SPS30 serial interface + driver. + + To compile this driver as a module, choose M here: the module will + be called sps30_serial. + +config SENSEAIR_SUNRISE_CO2 + tristate "Senseair Sunrise 006-0-0007 CO2 sensor" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Senseair Sunrise 006-0-0007 CO2 + sensor. + + To compile this driver as a module, choose M here: the + module will be called sunrise_co2. + +config VZ89X + tristate "SGX Sensortech MiCS VZ89X VOC sensor" + depends on I2C + help + Say Y here to build I2C interface support for the SGX + Sensortech MiCS VZ89X VOC (Volatile Organic Compounds) + sensors + +endmenu -- cgit v1.2.3