From 8b0a8165cdad0f4133837d753649ef4682e42c3b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:11:40 +0200 Subject: Merging upstream version 6.9.7. Signed-off-by: Daniel Baumann --- drivers/iio/pressure/Kconfig | 16 +- drivers/iio/pressure/Makefile | 2 + drivers/iio/pressure/bmp280-core.c | 10 +- drivers/iio/pressure/dps310.c | 11 +- drivers/iio/pressure/hp206c.c | 6 +- drivers/iio/pressure/hsc030pa.c | 49 +++++- drivers/iio/pressure/hsc030pa.h | 7 + drivers/iio/pressure/hsc030pa_i2c.c | 9 +- drivers/iio/pressure/hsc030pa_spi.c | 7 +- drivers/iio/pressure/mprls0025pa.c | 313 +++++++++++++++++---------------- drivers/iio/pressure/mprls0025pa.h | 102 +++++++++++ drivers/iio/pressure/mprls0025pa_i2c.c | 100 +++++++++++ drivers/iio/pressure/mprls0025pa_spi.c | 92 ++++++++++ drivers/iio/pressure/st_pressure_i2c.c | 5 +- 14 files changed, 551 insertions(+), 178 deletions(-) create mode 100644 drivers/iio/pressure/mprls0025pa.h create mode 100644 drivers/iio/pressure/mprls0025pa_i2c.c create mode 100644 drivers/iio/pressure/mprls0025pa_spi.c (limited to 'drivers/iio/pressure') diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 79adfd059c..3ad3850602 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -114,6 +114,8 @@ config HSC030PA depends on (I2C || SPI_MASTER) select HSC030PA_I2C if I2C select HSC030PA_SPI if SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Honeywell TruStability HSC and SSC pressure and temperature sensor series. @@ -181,7 +183,9 @@ config MPL3115 config MPRLS0025PA tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" - depends on I2C + depends on (I2C || SPI_MASTER) + select MPRLS0025PA_I2C if I2C + select MPRLS0025PA_SPI if SPI_MASTER select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -192,6 +196,16 @@ config MPRLS0025PA To compile this driver as a module, choose M here: the module will be called mprls0025pa. +config MPRLS0025PA_I2C + tristate + depends on MPRLS0025PA + depends on I2C + +config MPRLS0025PA_SPI + tristate + depends on MPRLS0025PA + depends on SPI_MASTER + config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" select IIO_BUFFER diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index b0f8b94662..a93709e357 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -24,6 +24,8 @@ obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o +obj-$(CONFIG_MPRLS0025PA_I2C) += mprls0025pa_i2c.o +obj-$(CONFIG_MPRLS0025PA_SPI) += mprls0025pa_spi.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 62e9e93d91..0199d055e0 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1394,12 +1394,12 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) /* * Temperature is returned in Celsius degrees in fractional - * form down 2^16. We rescale by x1000 to return milli Celsius - * to respect IIO ABI. + * form down 2^16. We rescale by x1000 to return millidegrees + * Celsius to respect IIO ABI. */ - *val = raw_temp * 1000; - *val2 = 16; - return IIO_VAL_FRACTIONAL_LOG2; + raw_temp = sign_extend32(raw_temp, 23); + *val = ((s64)raw_temp * 1000) / (1 << 16); + return IIO_VAL_INT; } static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c index 1ff091b2f7..d0a516d56d 100644 --- a/drivers/iio/pressure/dps310.c +++ b/drivers/iio/pressure/dps310.c @@ -730,7 +730,7 @@ static int dps310_read_pressure(struct dps310_data *data, int *val, int *val2, } } -static int dps310_calculate_temp(struct dps310_data *data) +static int dps310_calculate_temp(struct dps310_data *data, int *val) { s64 c0; s64 t; @@ -746,7 +746,9 @@ static int dps310_calculate_temp(struct dps310_data *data) t = c0 + ((s64)data->temp_raw * (s64)data->c1); /* Convert to milliCelsius and scale the temperature */ - return (int)div_s64(t * 1000LL, kt); + *val = (int)div_s64(t * 1000LL, kt); + + return 0; } static int dps310_read_temp(struct dps310_data *data, int *val, int *val2, @@ -768,11 +770,10 @@ static int dps310_read_temp(struct dps310_data *data, int *val, int *val2, if (rc) return rc; - rc = dps310_calculate_temp(data); - if (rc < 0) + rc = dps310_calculate_temp(data, val); + if (rc) return rc; - *val = rc; return IIO_VAL_INT; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c index a072de6cb5..261af15628 100644 --- a/drivers/iio/pressure/hp206c.c +++ b/drivers/iio/pressure/hp206c.c @@ -11,12 +11,12 @@ */ #include +#include #include #include #include #include #include -#include #include @@ -400,20 +400,18 @@ static const struct i2c_device_id hp206c_id[] = { }; MODULE_DEVICE_TABLE(i2c, hp206c_id); -#ifdef CONFIG_ACPI static const struct acpi_device_id hp206c_acpi_match[] = { {"HOP206C", 0}, { }, }; MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match); -#endif static struct i2c_driver hp206c_driver = { .probe = hp206c_probe, .id_table = hp206c_id, .driver = { .name = "hp206c", - .acpi_match_table = ACPI_PTR(hp206c_acpi_match), + .acpi_match_table = hp206c_acpi_match, }, }; diff --git a/drivers/iio/pressure/hsc030pa.c b/drivers/iio/pressure/hsc030pa.c index d6a51f0c33..1682b90d45 100644 --- a/drivers/iio/pressure/hsc030pa.c +++ b/drivers/iio/pressure/hsc030pa.c @@ -22,8 +22,11 @@ #include #include +#include #include #include +#include +#include #include @@ -297,6 +300,29 @@ static int hsc_get_measurement(struct hsc_data *data) return 0; } +static irqreturn_t hsc_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct hsc_data *data = iio_priv(indio_dev); + int ret; + + ret = hsc_get_measurement(data); + if (ret) + goto error; + + memcpy(&data->scan.chan[0], &data->buffer[0], 2); + memcpy(&data->scan.chan[1], &data->buffer[2], 2); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + +error: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + /* * IIO ABI expects * value = (conv + offset) * scale @@ -382,13 +408,29 @@ static const struct iio_chan_spec hsc_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + .endianness = IIO_BE, + }, }, { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 11, + .storagebits = 16, + .shift = 5, + .endianness = IIO_BE, + }, }, + IIO_CHAN_SOFT_TIMESTAMP(2), }; static const struct iio_info hsc_info = { @@ -406,7 +448,7 @@ int hsc_common_probe(struct device *dev, hsc_recv_fn recv) struct hsc_data *hsc; struct iio_dev *indio_dev; const char *triplet; - u64 tmp; + s64 tmp; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*hsc)); @@ -485,6 +527,11 @@ int hsc_common_probe(struct device *dev, hsc_recv_fn recv) indio_dev->channels = hsc->chip->channels; indio_dev->num_channels = hsc->chip->num_channels; + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + hsc_trigger_handler, NULL); + if (ret) + return ret; + return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_NS(hsc_common_probe, IIO_HONEYWELL_HSC030PA); diff --git a/drivers/iio/pressure/hsc030pa.h b/drivers/iio/pressure/hsc030pa.h index d20420dba4..9b40f46f57 100644 --- a/drivers/iio/pressure/hsc030pa.h +++ b/drivers/iio/pressure/hsc030pa.h @@ -10,7 +10,10 @@ #include +#include + #define HSC_REG_MEASUREMENT_RD_SIZE 4 +#define HSC_RESP_TIME_MS 2 struct device; @@ -53,6 +56,10 @@ struct hsc_data { s32 p_scale_dec; s64 p_offset; s32 p_offset_dec; + struct { + __be16 chan[2]; + s64 timestamp __aligned(8); + } scan; u8 buffer[HSC_REG_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); }; diff --git a/drivers/iio/pressure/hsc030pa_i2c.c b/drivers/iio/pressure/hsc030pa_i2c.c index e2b524b364..b3fd230e71 100644 --- a/drivers/iio/pressure/hsc030pa_i2c.c +++ b/drivers/iio/pressure/hsc030pa_i2c.c @@ -4,14 +4,17 @@ * * Copyright (c) 2023 Petre Rodan * - * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [hsc] - * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf [i2c related] + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf */ +#include +#include #include #include #include #include +#include #include @@ -23,6 +26,8 @@ static int hsc_i2c_recv(struct hsc_data *data) struct i2c_msg msg; int ret; + msleep_interruptible(HSC_RESP_TIME_MS); + msg.addr = client->addr; msg.flags = client->flags | I2C_M_RD; msg.len = HSC_REG_MEASUREMENT_RD_SIZE; diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c index a719bade83..818fa63034 100644 --- a/drivers/iio/pressure/hsc030pa_spi.c +++ b/drivers/iio/pressure/hsc030pa_spi.c @@ -4,13 +4,17 @@ * * Copyright (c) 2023 Petre Rodan * - * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-spi-comms-digital-ouptu-pressure-sensors-tn-008202-3-en-ciid-45843.pdf + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf */ +#include +#include #include #include #include #include +#include #include @@ -25,6 +29,7 @@ static int hsc_spi_recv(struct hsc_data *data) .len = HSC_REG_MEASUREMENT_RD_SIZE, }; + msleep_interruptible(HSC_RESP_TIME_MS); return spi_sync_transfer(spi, &xfer, 1); } diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index e3f0de020a..33a15d4c64 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -5,17 +5,13 @@ * Copyright (c) Andreas Klinger * * Data sheet: - * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ - * products/sensors/pressure-sensors/board-mount-pressure-sensors/ - * micropressure-mpr-series/documents/ - * sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf * - * 7-bit I2C default slave address: 0x18 */ -#include -#include -#include +#include +#include +#include #include #include #include @@ -25,7 +21,6 @@ #include #include -#include #include #include @@ -33,11 +28,15 @@ #include -/* bits in i2c status byte */ -#define MPR_I2C_POWER BIT(6) /* device is powered */ -#define MPR_I2C_BUSY BIT(5) /* device is busy */ -#define MPR_I2C_MEMORY BIT(2) /* integrity test passed */ -#define MPR_I2C_MATH BIT(0) /* internal math saturation */ +#include "mprls0025pa.h" + +/* bits in status byte */ +#define MPR_ST_POWER BIT(6) /* device is powered */ +#define MPR_ST_BUSY BIT(5) /* device is busy */ +#define MPR_ST_MEMORY BIT(2) /* integrity test passed */ +#define MPR_ST_MATH BIT(0) /* internal math saturation */ + +#define MPR_ST_ERR_FLAG (MPR_ST_BUSY | MPR_ST_MEMORY | MPR_ST_MATH) /* * support _RAW sysfs interface: @@ -70,60 +69,87 @@ * transfer function B: 2.5% to 22.5% of 2^24 * transfer function C: 20% to 80% of 2^24 */ -enum mpr_func_id { - MPR_FUNCTION_A, - MPR_FUNCTION_B, - MPR_FUNCTION_C, -}; - struct mpr_func_spec { u32 output_min; u32 output_max; }; static const struct mpr_func_spec mpr_func_spec[] = { - [MPR_FUNCTION_A] = {.output_min = 1677722, .output_max = 15099494}, - [MPR_FUNCTION_B] = {.output_min = 419430, .output_max = 3774874}, - [MPR_FUNCTION_C] = {.output_min = 3355443, .output_max = 13421773}, + [MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 }, + [MPR_FUNCTION_B] = { .output_min = 419430, .output_max = 3774874 }, + [MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }, }; -struct mpr_chan { - s32 pres; /* pressure value */ - s64 ts; /* timestamp */ +enum mpr_variants { + MPR0001BA = 0x00, MPR01_6BA = 0x01, MPR02_5BA = 0x02, MPR0060MG = 0x03, + MPR0100MG = 0x04, MPR0160MG = 0x05, MPR0250MG = 0x06, MPR0400MG = 0x07, + MPR0600MG = 0x08, MPR0001BG = 0x09, MPR01_6BG = 0x0a, MPR02_5BG = 0x0b, + MPR0100KA = 0x0c, MPR0160KA = 0x0d, MPR0250KA = 0x0e, MPR0006KG = 0x0f, + MPR0010KG = 0x10, MPR0016KG = 0x11, MPR0025KG = 0x12, MPR0040KG = 0x13, + MPR0060KG = 0x14, MPR0100KG = 0x15, MPR0160KG = 0x16, MPR0250KG = 0x17, + MPR0015PA = 0x18, MPR0025PA = 0x19, MPR0030PA = 0x1a, MPR0001PG = 0x1b, + MPR0005PG = 0x1c, MPR0015PG = 0x1d, MPR0030PG = 0x1e, MPR0300YG = 0x1f, + MPR_VARIANTS_MAX +}; + +static const char * const mpr_triplet_variants[MPR_VARIANTS_MAX] = { + [MPR0001BA] = "0001BA", [MPR01_6BA] = "01.6BA", [MPR02_5BA] = "02.5BA", + [MPR0060MG] = "0060MG", [MPR0100MG] = "0100MG", [MPR0160MG] = "0160MG", + [MPR0250MG] = "0250MG", [MPR0400MG] = "0400MG", [MPR0600MG] = "0600MG", + [MPR0001BG] = "0001BG", [MPR01_6BG] = "01.6BG", [MPR02_5BG] = "02.5BG", + [MPR0100KA] = "0100KA", [MPR0160KA] = "0160KA", [MPR0250KA] = "0250KA", + [MPR0006KG] = "0006KG", [MPR0010KG] = "0010KG", [MPR0016KG] = "0016KG", + [MPR0025KG] = "0025KG", [MPR0040KG] = "0040KG", [MPR0060KG] = "0060KG", + [MPR0100KG] = "0100KG", [MPR0160KG] = "0160KG", [MPR0250KG] = "0250KG", + [MPR0015PA] = "0015PA", [MPR0025PA] = "0025PA", [MPR0030PA] = "0030PA", + [MPR0001PG] = "0001PG", [MPR0005PG] = "0005PG", [MPR0015PG] = "0015PG", + [MPR0030PG] = "0030PG", [MPR0300YG] = "0300YG" +}; + +/** + * struct mpr_range_config - list of pressure ranges based on nomenclature + * @pmin: lowest pressure that can be measured + * @pmax: highest pressure that can be measured + */ +struct mpr_range_config { + const s32 pmin; + const s32 pmax; }; -struct mpr_data { - struct i2c_client *client; - struct mutex lock; /* - * access to device during read - */ - u32 pmin; /* minimal pressure in pascal */ - u32 pmax; /* maximal pressure in pascal */ - enum mpr_func_id function; /* transfer function */ - u32 outmin; /* - * minimal numerical range raw - * value from sensor - */ - u32 outmax; /* - * maximal numerical range raw - * value from sensor - */ - int scale; /* int part of scale */ - int scale2; /* nano part of scale */ - int offset; /* int part of offset */ - int offset2; /* nano part of offset */ - struct gpio_desc *gpiod_reset; /* reset */ - int irq; /* - * end of conversion irq; - * used to distinguish between - * irq mode and reading in a - * loop until data is ready - */ - struct completion completion; /* handshake from irq to read */ - struct mpr_chan chan; /* - * channel values for buffered - * mode - */ +/* All min max limits have been converted to pascals */ +static const struct mpr_range_config mpr_range_config[MPR_VARIANTS_MAX] = { + [MPR0001BA] = { .pmin = 0, .pmax = 100000 }, + [MPR01_6BA] = { .pmin = 0, .pmax = 160000 }, + [MPR02_5BA] = { .pmin = 0, .pmax = 250000 }, + [MPR0060MG] = { .pmin = 0, .pmax = 6000 }, + [MPR0100MG] = { .pmin = 0, .pmax = 10000 }, + [MPR0160MG] = { .pmin = 0, .pmax = 16000 }, + [MPR0250MG] = { .pmin = 0, .pmax = 25000 }, + [MPR0400MG] = { .pmin = 0, .pmax = 40000 }, + [MPR0600MG] = { .pmin = 0, .pmax = 60000 }, + [MPR0001BG] = { .pmin = 0, .pmax = 100000 }, + [MPR01_6BG] = { .pmin = 0, .pmax = 160000 }, + [MPR02_5BG] = { .pmin = 0, .pmax = 250000 }, + [MPR0100KA] = { .pmin = 0, .pmax = 100000 }, + [MPR0160KA] = { .pmin = 0, .pmax = 160000 }, + [MPR0250KA] = { .pmin = 0, .pmax = 250000 }, + [MPR0006KG] = { .pmin = 0, .pmax = 6000 }, + [MPR0010KG] = { .pmin = 0, .pmax = 10000 }, + [MPR0016KG] = { .pmin = 0, .pmax = 16000 }, + [MPR0025KG] = { .pmin = 0, .pmax = 25000 }, + [MPR0040KG] = { .pmin = 0, .pmax = 40000 }, + [MPR0060KG] = { .pmin = 0, .pmax = 60000 }, + [MPR0100KG] = { .pmin = 0, .pmax = 100000 }, + [MPR0160KG] = { .pmin = 0, .pmax = 160000 }, + [MPR0250KG] = { .pmin = 0, .pmax = 250000 }, + [MPR0015PA] = { .pmin = 0, .pmax = 103421 }, + [MPR0025PA] = { .pmin = 0, .pmax = 172369 }, + [MPR0030PA] = { .pmin = 0, .pmax = 206843 }, + [MPR0001PG] = { .pmin = 0, .pmax = 6895 }, + [MPR0005PG] = { .pmin = 0, .pmax = 34474 }, + [MPR0015PG] = { .pmin = 0, .pmax = 103421 }, + [MPR0030PG] = { .pmin = 0, .pmax = 206843 }, + [MPR0300YG] = { .pmin = 0, .pmax = 39997 } }; static const struct iio_chan_spec mpr_channels[] = { @@ -153,11 +179,11 @@ static void mpr_reset(struct mpr_data *data) } /** - * mpr_read_pressure() - Read pressure value from sensor via I2C + * mpr_read_pressure() - Read pressure value from sensor * @data: Pointer to private data struct. * @press: Output value read from sensor. * - * Reading from the sensor by sending and receiving I2C telegrams. + * Reading from the sensor by sending and receiving telegrams. * * If there is an end of conversion (EOC) interrupt registered the function * waits for a maximum of one second for the interrupt. @@ -170,25 +196,17 @@ static void mpr_reset(struct mpr_data *data) */ static int mpr_read_pressure(struct mpr_data *data, s32 *press) { - struct device *dev = &data->client->dev; + struct device *dev = data->dev; int ret, i; - u8 wdata[] = {0xAA, 0x00, 0x00}; - s32 status; int nloops = 10; - u8 buf[4]; reinit_completion(&data->completion); - ret = i2c_master_send(data->client, wdata, sizeof(wdata)); + ret = data->ops->write(data, MPR_CMD_SYNC, MPR_PKT_SYNC_LEN); if (ret < 0) { dev_err(dev, "error while writing ret: %d\n", ret); return ret; } - if (ret != sizeof(wdata)) { - dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret, - (u32)sizeof(wdata)); - return -EIO; - } if (data->irq > 0) { ret = wait_for_completion_timeout(&data->completion, HZ); @@ -206,14 +224,14 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) * quite long */ usleep_range(5000, 10000); - status = i2c_smbus_read_byte(data->client); - if (status < 0) { + ret = data->ops->read(data, MPR_CMD_NOP, 1); + if (ret < 0) { dev_err(dev, "error while reading, status: %d\n", - status); - return status; + ret); + return ret; } - if (!(status & MPR_I2C_BUSY)) + if (!(data->buffer[0] & MPR_ST_ERR_FLAG)) break; } if (i == nloops) { @@ -222,29 +240,19 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) } } - ret = i2c_master_recv(data->client, buf, sizeof(buf)); - if (ret < 0) { - dev_err(dev, "error in i2c_master_recv ret: %d\n", ret); + ret = data->ops->read(data, MPR_CMD_NOP, MPR_PKT_NOP_LEN); + if (ret < 0) return ret; - } - if (ret != sizeof(buf)) { - dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret, - (u32)sizeof(buf)); - return -EIO; - } - if (buf[0] & MPR_I2C_BUSY) { - /* - * it should never be the case that status still indicates - * business - */ - dev_err(dev, "data still not ready: %08x\n", buf[0]); + if (data->buffer[0] & MPR_ST_ERR_FLAG) { + dev_err(data->dev, + "unexpected status byte %02x\n", data->buffer[0]); return -ETIMEDOUT; } - *press = get_unaligned_be24(&buf[1]); + *press = get_unaligned_be24(&data->buffer[1]); - dev_dbg(dev, "received: %*ph cnt: %d\n", ret, buf, *press); + dev_dbg(dev, "received: %*ph cnt: %d\n", ret, data->buffer, *press); return 0; } @@ -271,7 +279,7 @@ static irqreturn_t mpr_trigger_handler(int irq, void *p) goto err; iio_push_to_buffers_with_timestamp(indio_dev, &data->chan, - iio_get_time_ns(indio_dev)); + iio_get_time_ns(indio_dev)); err: mutex_unlock(&data->lock); @@ -316,26 +324,23 @@ static const struct iio_info mpr_info = { .read_raw = &mpr_read_raw, }; -static int mpr_probe(struct i2c_client *client) +int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq) { int ret; struct mpr_data *data; struct iio_dev *indio_dev; - struct device *dev = &client->dev; + const char *triplet; s64 scale, offset; u32 func; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) - return dev_err_probe(dev, -EOPNOTSUPP, - "I2C functionality not supported\n"); - indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) - return dev_err_probe(dev, -ENOMEM, "couldn't get iio_dev\n"); + return -ENOMEM; data = iio_priv(indio_dev); - data->client = client; - data->irq = client->irq; + data->dev = dev; + data->ops = ops; + data->irq = irq; mutex_init(&data->lock); init_completion(&data->completion); @@ -349,104 +354,102 @@ static int mpr_probe(struct i2c_client *client) ret = devm_regulator_get_enable(dev, "vdd"); if (ret) return dev_err_probe(dev, ret, - "can't get and enable vdd supply\n"); + "can't get and enable vdd supply\n"); - if (dev_fwnode(dev)) { + ret = data->ops->init(data->dev); + if (ret) + return ret; + + ret = device_property_read_u32(dev, + "honeywell,transfer-function", &func); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,transfer-function could not be read\n"); + data->function = func - 1; + if (data->function > MPR_FUNCTION_C) + return dev_err_probe(dev, -EINVAL, + "honeywell,transfer-function %d invalid\n", + data->function); + + ret = device_property_read_string(dev, "honeywell,pressure-triplet", + &triplet); + if (ret) { ret = device_property_read_u32(dev, "honeywell,pmin-pascal", - &data->pmin); + &data->pmin); if (ret) return dev_err_probe(dev, ret, - "honeywell,pmin-pascal could not be read\n"); + "honeywell,pmin-pascal could not be read\n"); + ret = device_property_read_u32(dev, "honeywell,pmax-pascal", - &data->pmax); + &data->pmax); if (ret) return dev_err_probe(dev, ret, - "honeywell,pmax-pascal could not be read\n"); - ret = device_property_read_u32(dev, - "honeywell,transfer-function", &func); - if (ret) - return dev_err_probe(dev, ret, - "honeywell,transfer-function could not be read\n"); - data->function = func - 1; - if (data->function > MPR_FUNCTION_C) - return dev_err_probe(dev, -EINVAL, - "honeywell,transfer-function %d invalid\n", - data->function); + "honeywell,pmax-pascal could not be read\n"); } else { - /* when loaded as i2c device we need to use default values */ - dev_notice(dev, "firmware node not found; using defaults\n"); - data->pmin = 0; - data->pmax = 172369; /* 25 psi */ - data->function = MPR_FUNCTION_A; + ret = device_property_match_property_string(dev, + "honeywell,pressure-triplet", + mpr_triplet_variants, + MPR_VARIANTS_MAX); + if (ret < 0) + return dev_err_probe(dev, -EINVAL, + "honeywell,pressure-triplet is invalid\n"); + + data->pmin = mpr_range_config[ret].pmin; + data->pmax = mpr_range_config[ret].pmax; } + if (data->pmin >= data->pmax) + return dev_err_probe(dev, -EINVAL, + "pressure limits are invalid\n"); + data->outmin = mpr_func_spec[data->function].output_min; data->outmax = mpr_func_spec[data->function].output_max; /* use 64 bit calculation for preserving a reasonable precision */ scale = div_s64(((s64)(data->pmax - data->pmin)) * NANO, - data->outmax - data->outmin); + data->outmax - data->outmin); data->scale = div_s64_rem(scale, NANO, &data->scale2); /* * multiply with NANO before dividing by scale and later divide by NANO * again. */ offset = ((-1LL) * (s64)data->outmin) * NANO - - div_s64(div_s64((s64)data->pmin * NANO, scale), NANO); + div_s64(div_s64((s64)data->pmin * NANO, scale), NANO); data->offset = div_s64_rem(offset, NANO, &data->offset2); if (data->irq > 0) { ret = devm_request_irq(dev, data->irq, mpr_eoc_handler, - IRQF_TRIGGER_RISING, client->name, data); + IRQF_TRIGGER_RISING, + dev_name(dev), + data); if (ret) return dev_err_probe(dev, ret, - "request irq %d failed\n", data->irq); + "request irq %d failed\n", data->irq); } data->gpiod_reset = devm_gpiod_get_optional(dev, "reset", - GPIOD_OUT_HIGH); + GPIOD_OUT_HIGH); if (IS_ERR(data->gpiod_reset)) return dev_err_probe(dev, PTR_ERR(data->gpiod_reset), - "request reset-gpio failed\n"); + "request reset-gpio failed\n"); mpr_reset(data); ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, - mpr_trigger_handler, NULL); + mpr_trigger_handler, NULL); if (ret) return dev_err_probe(dev, ret, - "iio triggered buffer setup failed\n"); + "iio triggered buffer setup failed\n"); ret = devm_iio_device_register(dev, indio_dev); if (ret) return dev_err_probe(dev, ret, - "unable to register iio device\n"); + "unable to register iio device\n"); return 0; } - -static const struct of_device_id mpr_matches[] = { - { .compatible = "honeywell,mprls0025pa" }, - { } -}; -MODULE_DEVICE_TABLE(of, mpr_matches); - -static const struct i2c_device_id mpr_id[] = { - { "mprls0025pa" }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpr_id); - -static struct i2c_driver mpr_driver = { - .probe = mpr_probe, - .id_table = mpr_id, - .driver = { - .name = "mprls0025pa", - .of_match_table = mpr_matches, - }, -}; -module_i2c_driver(mpr_driver); +EXPORT_SYMBOL_NS(mpr_common_probe, IIO_HONEYWELL_MPRLS0025PA); MODULE_AUTHOR("Andreas Klinger "); -MODULE_DESCRIPTION("Honeywell MPRLS0025PA I2C driver"); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mprls0025pa.h b/drivers/iio/pressure/mprls0025pa.h new file mode 100644 index 0000000000..9d5c30afa9 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver + * + * Copyright (c) Andreas Klinger + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#ifndef _MPRLS0025PA_H +#define _MPRLS0025PA_H + +#include +#include +#include +#include +#include +#include + +#include + +#define MPR_MEASUREMENT_RD_SIZE 4 +#define MPR_CMD_NOP 0xf0 +#define MPR_CMD_SYNC 0xaa +#define MPR_PKT_NOP_LEN MPR_MEASUREMENT_RD_SIZE +#define MPR_PKT_SYNC_LEN 3 + +struct device; + +struct iio_chan_spec; +struct iio_dev; + +struct mpr_data; +struct mpr_ops; + +/** + * struct mpr_chan + * @pres: pressure value + * @ts: timestamp + */ +struct mpr_chan { + s32 pres; + s64 ts; +}; + +enum mpr_func_id { + MPR_FUNCTION_A, + MPR_FUNCTION_B, + MPR_FUNCTION_C, +}; + +/** + * struct mpr_data + * @dev: current device structure + * @ops: functions that implement the sensor reads/writes, bus init + * @lock: access to device during read + * @pmin: minimal pressure in pascal + * @pmax: maximal pressure in pascal + * @function: transfer function + * @outmin: minimum raw pressure in counts (based on transfer function) + * @outmax: maximum raw pressure in counts (based on transfer function) + * @scale: pressure scale + * @scale2: pressure scale, decimal number + * @offset: pressure offset + * @offset2: pressure offset, decimal number + * @gpiod_reset: reset + * @irq: end of conversion irq. used to distinguish between irq mode and + * reading in a loop until data is ready + * @completion: handshake from irq to read + * @chan: channel values for buffered mode + * @buffer: raw conversion data + */ +struct mpr_data { + struct device *dev; + const struct mpr_ops *ops; + struct mutex lock; + u32 pmin; + u32 pmax; + enum mpr_func_id function; + u32 outmin; + u32 outmax; + int scale; + int scale2; + int offset; + int offset2; + struct gpio_desc *gpiod_reset; + int irq; + struct completion completion; + struct mpr_chan chan; + u8 buffer[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); +}; + +struct mpr_ops { + int (*init)(struct device *dev); + int (*read)(struct mpr_data *data, const u8 cmd, const u8 cnt); + int (*write)(struct mpr_data *data, const u8 cmd, const u8 cnt); +}; + +int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq); + +#endif diff --git a/drivers/iio/pressure/mprls0025pa_i2c.c b/drivers/iio/pressure/mprls0025pa_i2c.c new file mode 100644 index 0000000000..7a5c5aa2b4 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa_i2c.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver + * + * Copyright (c) Andreas Klinger + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#include +#include +#include +#include +#include +#include + +#include "mprls0025pa.h" + +static int mpr_i2c_init(struct device *unused) +{ + return 0; +} + +static int mpr_i2c_read(struct mpr_data *data, const u8 unused, const u8 cnt) +{ + int ret; + struct i2c_client *client = to_i2c_client(data->dev); + + if (cnt > MPR_MEASUREMENT_RD_SIZE) + return -EOVERFLOW; + + memset(data->buffer, 0, MPR_MEASUREMENT_RD_SIZE); + ret = i2c_master_recv(client, data->buffer, cnt); + if (ret < 0) + return ret; + else if (ret != cnt) + return -EIO; + + return 0; +} + +static int mpr_i2c_write(struct mpr_data *data, const u8 cmd, const u8 unused) +{ + int ret; + struct i2c_client *client = to_i2c_client(data->dev); + u8 wdata[MPR_PKT_SYNC_LEN]; + + memset(wdata, 0, sizeof(wdata)); + wdata[0] = cmd; + + ret = i2c_master_send(client, wdata, MPR_PKT_SYNC_LEN); + if (ret < 0) + return ret; + else if (ret != MPR_PKT_SYNC_LEN) + return -EIO; + + return 0; +} + +static const struct mpr_ops mpr_i2c_ops = { + .init = mpr_i2c_init, + .read = mpr_i2c_read, + .write = mpr_i2c_write, +}; + +static int mpr_i2c_probe(struct i2c_client *client) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) + return -EOPNOTSUPP; + + return mpr_common_probe(&client->dev, &mpr_i2c_ops, client->irq); +} + +static const struct of_device_id mpr_i2c_match[] = { + { .compatible = "honeywell,mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, mpr_i2c_match); + +static const struct i2c_device_id mpr_i2c_id[] = { + { "mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mpr_i2c_id); + +static struct i2c_driver mpr_i2c_driver = { + .probe = mpr_i2c_probe, + .id_table = mpr_i2c_id, + .driver = { + .name = "mprls0025pa", + .of_match_table = mpr_i2c_match, + }, +}; +module_i2c_driver(mpr_i2c_driver); + +MODULE_AUTHOR("Andreas Klinger "); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor i2c driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA); diff --git a/drivers/iio/pressure/mprls0025pa_spi.c b/drivers/iio/pressure/mprls0025pa_spi.c new file mode 100644 index 0000000000..3aed14cd95 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa_spi.c @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MPRLS0025PA - Honeywell MicroPressure MPR series SPI sensor driver + * + * Copyright (c) 2024 Petre Rodan + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "mprls0025pa.h" + +struct mpr_spi_buf { + u8 tx[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); +}; + +static int mpr_spi_init(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpr_spi_buf *buf; + + buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_set_drvdata(spi, buf); + + return 0; +} + +static int mpr_spi_xfer(struct mpr_data *data, const u8 cmd, const u8 pkt_len) +{ + struct spi_device *spi = to_spi_device(data->dev); + struct mpr_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer; + + if (pkt_len > MPR_MEASUREMENT_RD_SIZE) + return -EOVERFLOW; + + buf->tx[0] = cmd; + xfer.tx_buf = buf->tx; + xfer.rx_buf = data->buffer; + xfer.len = pkt_len; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static const struct mpr_ops mpr_spi_ops = { + .init = mpr_spi_init, + .read = mpr_spi_xfer, + .write = mpr_spi_xfer, +}; + +static int mpr_spi_probe(struct spi_device *spi) +{ + return mpr_common_probe(&spi->dev, &mpr_spi_ops, spi->irq); +} + +static const struct of_device_id mpr_spi_match[] = { + { .compatible = "honeywell,mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, mpr_spi_match); + +static const struct spi_device_id mpr_spi_id[] = { + { "mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(spi, mpr_spi_id); + +static struct spi_driver mpr_spi_driver = { + .driver = { + .name = "mprls0025pa", + .of_match_table = mpr_spi_match, + }, + .probe = mpr_spi_probe, + .id_table = mpr_spi_id, +}; +module_spi_driver(mpr_spi_driver); + +MODULE_AUTHOR("Petre Rodan "); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor spi driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA); diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c index 5101552e3f..389523d6ae 100644 --- a/drivers/iio/pressure/st_pressure_i2c.c +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -7,7 +7,6 @@ * Denis Ciocca */ -#include #include #include #include @@ -55,13 +54,11 @@ static const struct of_device_id st_press_of_match[] = { }; MODULE_DEVICE_TABLE(of, st_press_of_match); -#ifdef CONFIG_ACPI static const struct acpi_device_id st_press_acpi_match[] = { {"SNO9210", LPS22HB}, { }, }; MODULE_DEVICE_TABLE(acpi, st_press_acpi_match); -#endif static const struct i2c_device_id st_press_id_table[] = { { LPS001WP_PRESS_DEV_NAME, LPS001WP }, @@ -114,7 +111,7 @@ static struct i2c_driver st_press_driver = { .driver = { .name = "st-press-i2c", .of_match_table = st_press_of_match, - .acpi_match_table = ACPI_PTR(st_press_acpi_match), + .acpi_match_table = st_press_acpi_match, }, .probe = st_press_i2c_probe, .id_table = st_press_id_table, -- cgit v1.2.3