From 8665bd53f2f2e27e5511d90428cb3f60e6d0ce15 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:50:12 +0200 Subject: Merging upstream version 6.8.9. Signed-off-by: Daniel Baumann --- drivers/iio/accel/Kconfig | 7 +- drivers/iio/accel/bmi088-accel-core.c | 2 + drivers/iio/accel/bmi088-accel-spi.c | 2 + drivers/iio/adc/Kconfig | 29 +- drivers/iio/adc/Makefile | 5 +- drivers/iio/adc/ad7091r-base.c | 113 +- drivers/iio/adc/ad7091r-base.h | 75 +- drivers/iio/adc/ad7091r5.c | 92 +- drivers/iio/adc/ad7091r8.c | 272 +++ drivers/iio/adc/ad9467.c | 95 +- drivers/iio/adc/adi-axi-adc.c | 85 +- drivers/iio/adc/max34408.c | 276 +++ drivers/iio/adc/mcp3911.c | 64 +- drivers/iio/amplifiers/hmc425a.c | 23 + drivers/iio/buffer/industrialio-buffer-dma.c | 87 +- drivers/iio/chemical/Kconfig | 11 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/ags02ma.c | 165 ++ drivers/iio/chemical/pms7003.c | 6 +- drivers/iio/chemical/scd30_serial.c | 6 +- drivers/iio/chemical/sps30_serial.c | 18 +- drivers/iio/dac/Kconfig | 10 + drivers/iio/dac/Makefile | 1 + drivers/iio/dac/ad5791.c | 9 +- drivers/iio/dac/mcp4821.c | 236 +++ drivers/iio/frequency/adf4377.c | 16 +- drivers/iio/frequency/admv1014.c | 31 +- drivers/iio/humidity/Kconfig | 12 + drivers/iio/humidity/Makefile | 1 + drivers/iio/humidity/hdc3020.c | 473 +++++ drivers/iio/imu/Kconfig | 1 + drivers/iio/imu/Makefile | 1 + drivers/iio/imu/adis.c | 18 +- drivers/iio/imu/bmi323/Kconfig | 33 + drivers/iio/imu/bmi323/Makefile | 7 + drivers/iio/imu/bmi323/bmi323.h | 209 ++ drivers/iio/imu/bmi323/bmi323_core.c | 2139 ++++++++++++++++++++ drivers/iio/imu/bmi323/bmi323_i2c.c | 121 ++ drivers/iio/imu/bmi323/bmi323_spi.c | 92 + drivers/iio/imu/bno055/bno055_ser_core.c | 6 +- drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 5 +- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 5 +- drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 5 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +- drivers/iio/industrialio-buffer.c | 22 +- drivers/iio/industrialio-core.c | 66 + drivers/iio/light/Kconfig | 37 + drivers/iio/light/Makefile | 3 + drivers/iio/light/isl76682.c | 345 ++++ drivers/iio/light/ltr390.c | 196 ++ drivers/iio/light/ltrf216a.c | 10 +- drivers/iio/light/pa12203001.c | 2 +- drivers/iio/light/rohm-bu27008.c | 201 +- drivers/iio/light/veml6075.c | 474 +++++ drivers/iio/magnetometer/tmag5273.c | 10 +- drivers/iio/pressure/Kconfig | 22 + drivers/iio/pressure/Makefile | 3 + drivers/iio/pressure/bmp280-core.c | 42 +- drivers/iio/pressure/bmp280-i2c.c | 8 +- drivers/iio/pressure/bmp280-spi.c | 60 +- drivers/iio/pressure/bmp280.h | 6 +- drivers/iio/pressure/dlhl60d.c | 7 +- drivers/iio/pressure/hsc030pa.c | 494 +++++ drivers/iio/pressure/hsc030pa.h | 74 + drivers/iio/pressure/hsc030pa_i2c.c | 69 + drivers/iio/pressure/hsc030pa_spi.c | 61 + drivers/iio/proximity/irsd200.c | 1 - drivers/iio/proximity/sx9324.c | 24 +- drivers/iio/resolver/ad2s1210.c | 162 +- drivers/iio/temperature/Kconfig | 22 + drivers/iio/temperature/Makefile | 2 + drivers/iio/temperature/mcp9600.c | 139 ++ drivers/iio/temperature/mlx90635.c | 1097 ++++++++++ 73 files changed, 8074 insertions(+), 459 deletions(-) create mode 100644 drivers/iio/adc/ad7091r8.c create mode 100644 drivers/iio/adc/max34408.c create mode 100644 drivers/iio/chemical/ags02ma.c create mode 100644 drivers/iio/dac/mcp4821.c create mode 100644 drivers/iio/humidity/hdc3020.c create mode 100644 drivers/iio/imu/bmi323/Kconfig create mode 100644 drivers/iio/imu/bmi323/Makefile create mode 100644 drivers/iio/imu/bmi323/bmi323.h create mode 100644 drivers/iio/imu/bmi323/bmi323_core.c create mode 100644 drivers/iio/imu/bmi323/bmi323_i2c.c create mode 100644 drivers/iio/imu/bmi323/bmi323_spi.c create mode 100644 drivers/iio/light/isl76682.c create mode 100644 drivers/iio/light/ltr390.c create mode 100644 drivers/iio/light/veml6075.c create mode 100644 drivers/iio/pressure/hsc030pa.c create mode 100644 drivers/iio/pressure/hsc030pa.h create mode 100644 drivers/iio/pressure/hsc030pa_i2c.c create mode 100644 drivers/iio/pressure/hsc030pa_spi.c create mode 100644 drivers/iio/temperature/mcp9600.c create mode 100644 drivers/iio/temperature/mlx90635.c (limited to 'drivers/iio') diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index d2221fe9ad..c9d7afe489 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -262,10 +262,11 @@ config BMI088_ACCEL select REGMAP select BMI088_ACCEL_SPI help - Say yes here to build support for the Bosch BMI088 accelerometer. + Say yes here to build support for the following Bosch accelerometers: + BMI088, BMI085, BMI090L. Note that all of these are combo module that + include both accelerometer and gyroscope. - This is a combo module with both accelerometer and gyroscope. This - driver only implements the accelerometer part, which has its own + This driver only implements the accelerometer part, which has its own address and register map. BMG160 provides the gyroscope driver. config BMI088_ACCEL_SPI diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c index 84edcc78d7..4d989708e6 100644 --- a/drivers/iio/accel/bmi088-accel-core.c +++ b/drivers/iio/accel/bmi088-accel-core.c @@ -2,6 +2,8 @@ /* * 3-axis accelerometer driver supporting following Bosch-Sensortec chips: * - BMI088 + * - BMI085 + * - BMI090L * * Copyright (c) 2018-2021, Topic Embedded Products */ diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c index ee540edd84..7b419a7b24 100644 --- a/drivers/iio/accel/bmi088-accel-spi.c +++ b/drivers/iio/accel/bmi088-accel-spi.c @@ -2,6 +2,8 @@ /* * 3-axis accelerometer driver supporting following Bosch-Sensortec chips: * - BMI088 + * - BMI085 + * - BMI090L * * Copyright (c) 2018-2020, Topic Embedded Products */ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 35f9867da1..3b73c509bd 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -36,13 +36,29 @@ config AD4130 To compile this driver as a module, choose M here: the module will be called ad4130. +config AD7091R + tristate + config AD7091R5 tristate "Analog Devices AD7091R5 ADC Driver" depends on I2C + select AD7091R select REGMAP_I2C help Say yes here to build support for Analog Devices AD7091R-5 ADC. +config AD7091R8 + tristate "Analog Devices AD7091R8 ADC Driver" + depends on SPI + select AD7091R + select REGMAP_SPI + help + Say yes here to build support for Analog Devices AD7091R-2, AD7091R-4, + and AD7091R-8 ADC. + + To compile this driver as a module, choose M here: the module will be + called ad7091r8. + config AD7124 tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver" depends on SPI_MASTER @@ -292,7 +308,7 @@ config ADI_AXI_ADC select IIO_BUFFER select IIO_BUFFER_HW_CONSUMER select IIO_BUFFER_DMAENGINE - depends on HAS_IOMEM + select REGMAP_MMIO depends on OF help Say yes here to build support for Analog Devices Generic @@ -745,6 +761,17 @@ config MAX1363 To compile this driver as a module, choose M here: the module will be called max1363. +config MAX34408 + tristate "Maxim max34408/max344089 ADC driver" + depends on I2C + help + Say yes here to build support for Maxim max34408/max34409 current sense + monitor with 8-bits ADC interface with overcurrent delay/threshold and + shutdown delay. + + To compile this driver as a module, choose M here: the module will be + called max34408. + config MAX77541_ADC tristate "Analog Devices MAX77541 ADC driver" depends on MFD_MAX77541 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index bee11d442a..d2fda54a32 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -7,7 +7,9 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o obj-$(CONFIG_AD4130) += ad4130.o -obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o +obj-$(CONFIG_AD7091R) += ad7091r-base.o +obj-$(CONFIG_AD7091R5) += ad7091r5.o +obj-$(CONFIG_AD7091R8) += ad7091r8.o obj-$(CONFIG_AD7124) += ad7124.o obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_AD7266) += ad7266.o @@ -68,6 +70,7 @@ obj-$(CONFIG_MAX11205) += max11205.o obj-$(CONFIG_MAX11410) += max11410.o obj-$(CONFIG_MAX1241) += max1241.o obj-$(CONFIG_MAX1363) += max1363.o +obj-$(CONFIG_MAX34408) += max34408.o obj-$(CONFIG_MAX77541_ADC) += max77541-adc.o obj-$(CONFIG_MAX9611) += max9611.o obj-$(CONFIG_MCP320X) += mcp320x.o diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c index 76002b91c8..f4255b91ac 100644 --- a/drivers/iio/adc/ad7091r-base.c +++ b/drivers/iio/adc/ad7091r-base.c @@ -16,41 +16,6 @@ #include "ad7091r-base.h" -#define AD7091R_REG_RESULT 0 -#define AD7091R_REG_CHANNEL 1 -#define AD7091R_REG_CONF 2 -#define AD7091R_REG_ALERT 3 -#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4) -#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5) -#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6) - -/* AD7091R_REG_RESULT */ -#define AD7091R_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3) -#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff) - -/* AD7091R_REG_CONF */ -#define AD7091R_REG_CONF_ALERT_EN BIT(4) -#define AD7091R_REG_CONF_AUTO BIT(8) -#define AD7091R_REG_CONF_CMD BIT(10) - -#define AD7091R_REG_CONF_MODE_MASK \ - (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD) - -enum ad7091r_mode { - AD7091R_MODE_SAMPLE, - AD7091R_MODE_COMMAND, - AD7091R_MODE_AUTOCYCLE, -}; - -struct ad7091r_state { - struct device *dev; - struct regmap *map; - struct regulator *vref; - const struct ad7091r_chip_info *chip_info; - enum ad7091r_mode mode; - struct mutex lock; /*lock to prevent concurent reads */ -}; - const struct iio_event_spec ad7091r_events[] = { { .type = IIO_EV_TYPE_THRESH, @@ -72,34 +37,6 @@ const struct iio_event_spec ad7091r_events[] = { }; EXPORT_SYMBOL_NS_GPL(ad7091r_events, IIO_AD7091R); -static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode) -{ - int ret, conf; - - switch (mode) { - case AD7091R_MODE_SAMPLE: - conf = 0; - break; - case AD7091R_MODE_COMMAND: - conf = AD7091R_REG_CONF_CMD; - break; - case AD7091R_MODE_AUTOCYCLE: - conf = AD7091R_REG_CONF_AUTO; - break; - default: - return -EINVAL; - } - - ret = regmap_update_bits(st->map, AD7091R_REG_CONF, - AD7091R_REG_CONF_MODE_MASK, conf); - if (ret) - return ret; - - st->mode = mode; - - return 0; -} - static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel) { unsigned int dummy; @@ -133,7 +70,7 @@ static int ad7091r_read_one(struct iio_dev *iio_dev, if (ret) return ret; - if (AD7091R_REG_RESULT_CH_ID(val) != channel) + if (st->chip_info->reg_result_chan_id(val) != channel) return -EIO; *read_val = AD7091R_REG_RESULT_CONV_RESULT(val); @@ -364,9 +301,8 @@ static void ad7091r_remove(void *data) regulator_disable(st->vref); } -int ad7091r_probe(struct device *dev, const char *name, - const struct ad7091r_chip_info *chip_info, - struct regmap *map, int irq) +int ad7091r_probe(struct device *dev, const struct ad7091r_init_info *init_info, + int irq) { struct iio_dev *iio_dev; struct ad7091r_state *st; @@ -378,29 +314,42 @@ int ad7091r_probe(struct device *dev, const char *name, st = iio_priv(iio_dev); st->dev = dev; - st->chip_info = chip_info; - st->map = map; + init_info->init_adc_regmap(st, init_info->regmap_config); + if (IS_ERR(st->map)) + return dev_err_probe(st->dev, PTR_ERR(st->map), + "Error initializing regmap\n"); - iio_dev->name = name; iio_dev->info = &ad7091r_info; iio_dev->modes = INDIO_DIRECT_MODE; - iio_dev->num_channels = chip_info->num_channels; - iio_dev->channels = chip_info->channels; + if (init_info->setup) { + ret = init_info->setup(st); + if (ret < 0) + return ret; + } if (irq) { + st->chip_info = init_info->info_irq; ret = regmap_update_bits(st->map, AD7091R_REG_CONF, AD7091R_REG_CONF_ALERT_EN, BIT(4)); if (ret) return ret; ret = devm_request_threaded_irq(dev, irq, NULL, - ad7091r_event_handler, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, iio_dev); + ad7091r_event_handler, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + st->chip_info->name, iio_dev); if (ret) return ret; + } else { + st->chip_info = init_info->info_no_irq; } + iio_dev->name = st->chip_info->name; + iio_dev->num_channels = st->chip_info->num_channels; + iio_dev->channels = st->chip_info->channels; + st->vref = devm_regulator_get_optional(dev, "vref"); if (IS_ERR(st->vref)) { if (PTR_ERR(st->vref) == -EPROBE_DEFER) @@ -423,7 +372,7 @@ int ad7091r_probe(struct device *dev, const char *name, } /* Use command mode by default to convert only desired channels*/ - ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND); + ret = st->chip_info->set_mode(st, AD7091R_MODE_COMMAND); if (ret) return ret; @@ -431,7 +380,7 @@ int ad7091r_probe(struct device *dev, const char *name, } EXPORT_SYMBOL_NS_GPL(ad7091r_probe, IIO_AD7091R); -static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg) +bool ad7091r_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { case AD7091R_REG_RESULT: @@ -441,8 +390,9 @@ static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg) return true; } } +EXPORT_SYMBOL_NS_GPL(ad7091r_writeable_reg, IIO_AD7091R); -static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg) +bool ad7091r_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case AD7091R_REG_RESULT: @@ -452,14 +402,7 @@ static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg) return false; } } - -const struct regmap_config ad7091r_regmap_config = { - .reg_bits = 8, - .val_bits = 16, - .writeable_reg = ad7091r_writeable_reg, - .volatile_reg = ad7091r_volatile_reg, -}; -EXPORT_SYMBOL_NS_GPL(ad7091r_regmap_config, IIO_AD7091R); +EXPORT_SYMBOL_NS_GPL(ad7091r_volatile_reg, IIO_AD7091R); MODULE_AUTHOR("Beniamin Bia "); MODULE_DESCRIPTION("Analog Devices AD7091Rx multi-channel converters"); diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h index b9e1c8bf34..696bf7a897 100644 --- a/drivers/iio/adc/ad7091r-base.h +++ b/drivers/iio/adc/ad7091r-base.h @@ -8,27 +8,92 @@ #ifndef __DRIVERS_IIO_ADC_AD7091R_BASE_H__ #define __DRIVERS_IIO_ADC_AD7091R_BASE_H__ +#include + +#define AD7091R_REG_RESULT 0 +#define AD7091R_REG_CHANNEL 1 +#define AD7091R_REG_CONF 2 +#define AD7091R_REG_ALERT 3 +#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4) +#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5) +#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6) + +/* AD7091R_REG_RESULT */ +#define AD7091R5_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3) +#define AD7091R8_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x7) +#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff) + +/* AD7091R_REG_CONF */ #define AD7091R_REG_CONF_INT_VREF BIT(0) +#define AD7091R_REG_CONF_ALERT_EN BIT(4) +#define AD7091R_REG_CONF_AUTO BIT(8) +#define AD7091R_REG_CONF_CMD BIT(10) + +#define AD7091R_REG_CONF_MODE_MASK \ + (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD) /* AD7091R_REG_CH_LIMIT */ #define AD7091R_HIGH_LIMIT 0xFFF #define AD7091R_LOW_LIMIT 0x0 +#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \ + .type = IIO_VOLTAGE, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .indexed = 1, \ + .channel = idx, \ + .event_spec = ev, \ + .num_event_specs = num_ev, \ + .scan_type.storagebits = 16, \ + .scan_type.realbits = bits, \ +} + struct device; -struct ad7091r_state; +struct gpio_desc; + +enum ad7091r_mode { + AD7091R_MODE_SAMPLE, + AD7091R_MODE_COMMAND, + AD7091R_MODE_AUTOCYCLE, +}; + +struct ad7091r_state { + struct device *dev; + struct regmap *map; + struct gpio_desc *convst_gpio; + struct gpio_desc *reset_gpio; + struct regulator *vref; + const struct ad7091r_chip_info *chip_info; + enum ad7091r_mode mode; + struct mutex lock; /*lock to prevent concurent reads */ + __be16 tx_buf __aligned(IIO_DMA_MINALIGN); + __be16 rx_buf; +}; struct ad7091r_chip_info { + const char *name; unsigned int num_channels; const struct iio_chan_spec *channels; unsigned int vref_mV; + unsigned int (*reg_result_chan_id)(unsigned int val); + int (*set_mode)(struct ad7091r_state *st, enum ad7091r_mode mode); +}; + +struct ad7091r_init_info { + const struct ad7091r_chip_info *info_irq; + const struct ad7091r_chip_info *info_no_irq; + const struct regmap_config *regmap_config; + void (*init_adc_regmap)(struct ad7091r_state *st, + const struct regmap_config *regmap_conf); + int (*setup)(struct ad7091r_state *st); }; extern const struct iio_event_spec ad7091r_events[3]; -extern const struct regmap_config ad7091r_regmap_config; +int ad7091r_probe(struct device *dev, const struct ad7091r_init_info *init_info, + int irq); -int ad7091r_probe(struct device *dev, const char *name, - const struct ad7091r_chip_info *chip_info, - struct regmap *map, int irq); +bool ad7091r_volatile_reg(struct device *dev, unsigned int reg); +bool ad7091r_writeable_reg(struct device *dev, unsigned int reg); #endif /* __DRIVERS_IIO_ADC_AD7091R_BASE_H__ */ diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c index dae98c95eb..a758373341 100644 --- a/drivers/iio/adc/ad7091r5.c +++ b/drivers/iio/adc/ad7091r5.c @@ -12,17 +12,6 @@ #include "ad7091r-base.h" -#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \ - .type = IIO_VOLTAGE, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .indexed = 1, \ - .channel = idx, \ - .event_spec = ev, \ - .num_event_specs = num_ev, \ - .scan_type.storagebits = 16, \ - .scan_type.realbits = bits, \ -} static const struct iio_chan_spec ad7091r5_channels_irq[] = { AD7091R_CHANNEL(0, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), AD7091R_CHANNEL(1, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), @@ -37,43 +26,98 @@ static const struct iio_chan_spec ad7091r5_channels_noirq[] = { AD7091R_CHANNEL(3, 12, NULL, 0), }; +static int ad7091r5_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode) +{ + int ret, conf; + + switch (mode) { + case AD7091R_MODE_SAMPLE: + conf = 0; + break; + case AD7091R_MODE_COMMAND: + conf = AD7091R_REG_CONF_CMD; + break; + case AD7091R_MODE_AUTOCYCLE: + conf = AD7091R_REG_CONF_AUTO; + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(st->map, AD7091R_REG_CONF, + AD7091R_REG_CONF_MODE_MASK, conf); + if (ret) + return ret; + + st->mode = mode; + + return 0; +} + +static unsigned int ad7091r5_reg_result_chan_id(unsigned int val) +{ + return AD7091R5_REG_RESULT_CH_ID(val); +} + static const struct ad7091r_chip_info ad7091r5_chip_info_irq = { + .name = "ad7091r-5", .channels = ad7091r5_channels_irq, .num_channels = ARRAY_SIZE(ad7091r5_channels_irq), .vref_mV = 2500, + .reg_result_chan_id = &ad7091r5_reg_result_chan_id, + .set_mode = &ad7091r5_set_mode, }; static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = { + .name = "ad7091r-5", .channels = ad7091r5_channels_noirq, .num_channels = ARRAY_SIZE(ad7091r5_channels_noirq), .vref_mV = 2500, + .reg_result_chan_id = &ad7091r5_reg_result_chan_id, + .set_mode = &ad7091r5_set_mode, }; -static int ad7091r5_i2c_probe(struct i2c_client *i2c) +static const struct regmap_config ad7091r_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .writeable_reg = ad7091r_writeable_reg, + .volatile_reg = ad7091r_volatile_reg, +}; + +static void ad7091r5_regmap_init(struct ad7091r_state *st, + const struct regmap_config *regmap_conf) { - const struct i2c_device_id *id = i2c_client_get_device_id(i2c); - const struct ad7091r_chip_info *chip_info; - struct regmap *map = devm_regmap_init_i2c(i2c, &ad7091r_regmap_config); + struct i2c_client *i2c = container_of(st->dev, struct i2c_client, dev); + + st->map = devm_regmap_init_i2c(i2c, regmap_conf); +} + +static struct ad7091r_init_info ad7091r5_init_info = { + .info_irq = &ad7091r5_chip_info_irq, + .info_no_irq = &ad7091r5_chip_info_noirq, + .regmap_config = &ad7091r_regmap_config, + .init_adc_regmap = &ad7091r5_regmap_init +}; - if (IS_ERR(map)) - return PTR_ERR(map); +static int ad7091r5_i2c_probe(struct i2c_client *i2c) +{ + const struct ad7091r_init_info *init_info; - if (i2c->irq) - chip_info = &ad7091r5_chip_info_irq; - else - chip_info = &ad7091r5_chip_info_noirq; + init_info = i2c_get_match_data(i2c); + if (!init_info) + return -EINVAL; - return ad7091r_probe(&i2c->dev, id->name, chip_info, map, i2c->irq); + return ad7091r_probe(&i2c->dev, init_info, i2c->irq); } static const struct of_device_id ad7091r5_dt_ids[] = { - { .compatible = "adi,ad7091r5" }, + { .compatible = "adi,ad7091r5", .data = &ad7091r5_init_info }, {}, }; MODULE_DEVICE_TABLE(of, ad7091r5_dt_ids); static const struct i2c_device_id ad7091r5_i2c_ids[] = { - {"ad7091r5", 0}, + {"ad7091r5", (kernel_ulong_t)&ad7091r5_init_info }, {} }; MODULE_DEVICE_TABLE(i2c, ad7091r5_i2c_ids); diff --git a/drivers/iio/adc/ad7091r8.c b/drivers/iio/adc/ad7091r8.c new file mode 100644 index 0000000000..7005643050 --- /dev/null +++ b/drivers/iio/adc/ad7091r8.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Analog Devices AD7091R8 12-bit SAR ADC driver + * + * Copyright 2023 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include "ad7091r-base.h" + +#define AD7091R8_REG_ADDR_MSK GENMASK(15, 11) +#define AD7091R8_RD_WR_FLAG_MSK BIT(10) +#define AD7091R8_REG_DATA_MSK GENMASK(9, 0) + +#define AD7091R_SPI_REGMAP_CONFIG(n) { \ + .reg_bits = 8, \ + .val_bits = 16, \ + .volatile_reg = ad7091r_volatile_reg, \ + .writeable_reg = ad7091r_writeable_reg, \ + .max_register = AD7091R_REG_CH_HYSTERESIS(n), \ +} + +static int ad7091r8_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode) +{ + /* AD7091R-2/-4/-8 don't set sample/command/autocycle mode in conf reg */ + st->mode = mode; + return 0; +} + +static unsigned int ad7091r8_reg_result_chan_id(unsigned int val) +{ + return AD7091R8_REG_RESULT_CH_ID(val); +} + +#define AD7091R_SPI_CHIP_INFO(_n, _name) { \ + .name = _name, \ + .channels = ad7091r##_n##_channels, \ + .num_channels = ARRAY_SIZE(ad7091r##_n##_channels), \ + .vref_mV = 2500, \ + .reg_result_chan_id = &ad7091r8_reg_result_chan_id, \ + .set_mode = &ad7091r8_set_mode, \ +} + +#define AD7091R_SPI_CHIP_INFO_IRQ(_n, _name) { \ + .name = _name, \ + .channels = ad7091r##_n##_channels_irq, \ + .num_channels = ARRAY_SIZE(ad7091r##_n##_channels_irq), \ + .vref_mV = 2500, \ + .reg_result_chan_id = &ad7091r8_reg_result_chan_id, \ + .set_mode = &ad7091r8_set_mode, \ +} + +enum ad7091r8_info_ids { + AD7091R2_INFO, + AD7091R4_INFO, + AD7091R4_INFO_IRQ, + AD7091R8_INFO, + AD7091R8_INFO_IRQ, +}; + +static const struct iio_chan_spec ad7091r2_channels[] = { + AD7091R_CHANNEL(0, 12, NULL, 0), + AD7091R_CHANNEL(1, 12, NULL, 0), +}; + +static const struct iio_chan_spec ad7091r4_channels[] = { + AD7091R_CHANNEL(0, 12, NULL, 0), + AD7091R_CHANNEL(1, 12, NULL, 0), + AD7091R_CHANNEL(2, 12, NULL, 0), + AD7091R_CHANNEL(3, 12, NULL, 0), +}; + +static const struct iio_chan_spec ad7091r4_channels_irq[] = { + AD7091R_CHANNEL(0, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(1, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(2, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(3, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), +}; + +static const struct iio_chan_spec ad7091r8_channels[] = { + AD7091R_CHANNEL(0, 12, NULL, 0), + AD7091R_CHANNEL(1, 12, NULL, 0), + AD7091R_CHANNEL(2, 12, NULL, 0), + AD7091R_CHANNEL(3, 12, NULL, 0), + AD7091R_CHANNEL(4, 12, NULL, 0), + AD7091R_CHANNEL(5, 12, NULL, 0), + AD7091R_CHANNEL(6, 12, NULL, 0), + AD7091R_CHANNEL(7, 12, NULL, 0), +}; + +static const struct iio_chan_spec ad7091r8_channels_irq[] = { + AD7091R_CHANNEL(0, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(1, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(2, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(3, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(4, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(5, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(6, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), + AD7091R_CHANNEL(7, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)), +}; + +static void ad7091r_pulse_convst(struct ad7091r_state *st) +{ + gpiod_set_value_cansleep(st->convst_gpio, 1); + gpiod_set_value_cansleep(st->convst_gpio, 0); +} + +static int ad7091r_regmap_bus_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct ad7091r_state *st = context; + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + int ret; + + struct spi_transfer t[] = { + { + .tx_buf = &st->tx_buf, + .len = 2, + .cs_change = 1, + }, { + .rx_buf = &st->rx_buf, + .len = 2, + } + }; + + if (reg == AD7091R_REG_RESULT) + ad7091r_pulse_convst(st); + + st->tx_buf = cpu_to_be16(reg << 11); + + ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t)); + if (ret < 0) + return ret; + + *val = be16_to_cpu(st->rx_buf); + return 0; +} + +static int ad7091r_regmap_bus_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct ad7091r_state *st = context; + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + + /* + * AD7091R-2/-4/-8 protocol (datasheet page 31) is to do a single SPI + * transfer with reg address set in bits B15:B11 and value set in B9:B0. + */ + st->tx_buf = cpu_to_be16(FIELD_PREP(AD7091R8_REG_DATA_MSK, val) | + FIELD_PREP(AD7091R8_RD_WR_FLAG_MSK, 1) | + FIELD_PREP(AD7091R8_REG_ADDR_MSK, reg)); + + return spi_write(spi, &st->tx_buf, 2); +} + +static struct regmap_bus ad7091r8_regmap_bus = { + .reg_read = ad7091r_regmap_bus_reg_read, + .reg_write = ad7091r_regmap_bus_reg_write, + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static const struct ad7091r_chip_info ad7091r8_infos[] = { + [AD7091R2_INFO] = AD7091R_SPI_CHIP_INFO(2, "ad7091r-2"), + [AD7091R4_INFO] = AD7091R_SPI_CHIP_INFO(4, "ad7091r-4"), + [AD7091R4_INFO_IRQ] = AD7091R_SPI_CHIP_INFO_IRQ(4, "ad7091r-4"), + [AD7091R8_INFO] = AD7091R_SPI_CHIP_INFO(8, "ad7091r-8"), + [AD7091R8_INFO_IRQ] = AD7091R_SPI_CHIP_INFO_IRQ(8, "ad7091r-8") +}; + +static const struct regmap_config ad7091r2_reg_conf = AD7091R_SPI_REGMAP_CONFIG(2); +static const struct regmap_config ad7091r4_reg_conf = AD7091R_SPI_REGMAP_CONFIG(4); +static const struct regmap_config ad7091r8_reg_conf = AD7091R_SPI_REGMAP_CONFIG(8); + +static void ad7091r8_regmap_init(struct ad7091r_state *st, + const struct regmap_config *regmap_conf) +{ + st->map = devm_regmap_init(st->dev, &ad7091r8_regmap_bus, st, + regmap_conf); +} + +static int ad7091r8_gpio_setup(struct ad7091r_state *st) +{ + st->convst_gpio = devm_gpiod_get(st->dev, "convst", GPIOD_OUT_LOW); + if (IS_ERR(st->convst_gpio)) + return dev_err_probe(st->dev, PTR_ERR(st->convst_gpio), + "Error getting convst GPIO\n"); + + st->reset_gpio = devm_gpiod_get_optional(st->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(st->reset_gpio)) + return dev_err_probe(st->dev, PTR_ERR(st->reset_gpio), + "Error on requesting reset GPIO\n"); + + if (st->reset_gpio) { + fsleep(20); + gpiod_set_value_cansleep(st->reset_gpio, 0); + } + + return 0; +} + +static struct ad7091r_init_info ad7091r2_init_info = { + .info_no_irq = &ad7091r8_infos[AD7091R2_INFO], + .regmap_config = &ad7091r2_reg_conf, + .init_adc_regmap = &ad7091r8_regmap_init, + .setup = &ad7091r8_gpio_setup +}; + +static struct ad7091r_init_info ad7091r4_init_info = { + .info_no_irq = &ad7091r8_infos[AD7091R4_INFO], + .info_irq = &ad7091r8_infos[AD7091R4_INFO_IRQ], + .regmap_config = &ad7091r4_reg_conf, + .init_adc_regmap = &ad7091r8_regmap_init, + .setup = &ad7091r8_gpio_setup +}; + +static struct ad7091r_init_info ad7091r8_init_info = { + .info_no_irq = &ad7091r8_infos[AD7091R8_INFO], + .info_irq = &ad7091r8_infos[AD7091R8_INFO_IRQ], + .regmap_config = &ad7091r8_reg_conf, + .init_adc_regmap = &ad7091r8_regmap_init, + .setup = &ad7091r8_gpio_setup +}; + +static int ad7091r8_spi_probe(struct spi_device *spi) +{ + const struct ad7091r_init_info *init_info; + + init_info = spi_get_device_match_data(spi); + if (!init_info) + return -EINVAL; + + return ad7091r_probe(&spi->dev, init_info, spi->irq); +} + +static const struct of_device_id ad7091r8_of_match[] = { + { .compatible = "adi,ad7091r2", .data = &ad7091r2_init_info }, + { .compatible = "adi,ad7091r4", .data = &ad7091r4_init_info }, + { .compatible = "adi,ad7091r8", .data = &ad7091r8_init_info }, + { } +}; +MODULE_DEVICE_TABLE(of, ad7091r8_of_match); + +static const struct spi_device_id ad7091r8_spi_id[] = { + { "ad7091r2", (kernel_ulong_t)&ad7091r2_init_info }, + { "ad7091r4", (kernel_ulong_t)&ad7091r4_init_info }, + { "ad7091r8", (kernel_ulong_t)&ad7091r8_init_info }, + { } +}; +MODULE_DEVICE_TABLE(spi, ad7091r8_spi_id); + +static struct spi_driver ad7091r8_driver = { + .driver = { + .name = "ad7091r8", + .of_match_table = ad7091r8_of_match, + }, + .probe = ad7091r8_spi_probe, + .id_table = ad7091r8_spi_id, +}; +module_spi_driver(ad7091r8_driver); + +MODULE_AUTHOR("Marcelo Schmitt "); +MODULE_DESCRIPTION("Analog Devices AD7091R8 ADC driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_AD7091R); diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index f668313730..6581fce4ba 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -101,12 +101,6 @@ #define AD9467_DEF_OUTPUT_MODE 0x08 #define AD9467_REG_VREF_MASK 0x0F -enum { - ID_AD9265, - ID_AD9434, - ID_AD9467, -}; - struct ad9467_chip_info { struct adi_axi_adc_chip_info axi_adc_info; unsigned int default_output_mode; @@ -164,7 +158,7 @@ static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg, struct spi_device *spi = st->spi; int ret; - if (readval == NULL) { + if (!readval) { guard(mutex)(&st->lock); ret = ad9467_spi_write(spi, reg, writeval); if (ret) @@ -234,43 +228,46 @@ static const struct iio_chan_spec ad9467_channels[] = { AD9467_CHAN(0, 0, 16, 'S'), }; -static const struct ad9467_chip_info ad9467_chip_tbl[] = { - [ID_AD9265] = { - .axi_adc_info = { - .id = CHIPID_AD9265, - .max_rate = 125000000UL, - .scale_table = ad9265_scale_table, - .num_scales = ARRAY_SIZE(ad9265_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), - }, - .default_output_mode = AD9265_DEF_OUTPUT_MODE, - .vref_mask = AD9265_REG_VREF_MASK, +static const struct ad9467_chip_info ad9467_chip_tbl = { + .axi_adc_info = { + .name = "ad9467", + .id = CHIPID_AD9467, + .max_rate = 250000000UL, + .scale_table = ad9467_scale_table, + .num_scales = ARRAY_SIZE(ad9467_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), }, - [ID_AD9434] = { - .axi_adc_info = { - .id = CHIPID_AD9434, - .max_rate = 500000000UL, - .scale_table = ad9434_scale_table, - .num_scales = ARRAY_SIZE(ad9434_scale_table), - .channels = ad9434_channels, - .num_channels = ARRAY_SIZE(ad9434_channels), - }, - .default_output_mode = AD9434_DEF_OUTPUT_MODE, - .vref_mask = AD9434_REG_VREF_MASK, + .default_output_mode = AD9467_DEF_OUTPUT_MODE, + .vref_mask = AD9467_REG_VREF_MASK, +}; + +static const struct ad9467_chip_info ad9434_chip_tbl = { + .axi_adc_info = { + .name = "ad9434", + .id = CHIPID_AD9434, + .max_rate = 500000000UL, + .scale_table = ad9434_scale_table, + .num_scales = ARRAY_SIZE(ad9434_scale_table), + .channels = ad9434_channels, + .num_channels = ARRAY_SIZE(ad9434_channels), }, - [ID_AD9467] = { - .axi_adc_info = { - .id = CHIPID_AD9467, - .max_rate = 250000000UL, - .scale_table = ad9467_scale_table, - .num_scales = ARRAY_SIZE(ad9467_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), - }, - .default_output_mode = AD9467_DEF_OUTPUT_MODE, - .vref_mask = AD9467_REG_VREF_MASK, + .default_output_mode = AD9434_DEF_OUTPUT_MODE, + .vref_mask = AD9434_REG_VREF_MASK, +}; + +static const struct ad9467_chip_info ad9265_chip_tbl = { + .axi_adc_info = { + .name = "ad9265", + .id = CHIPID_AD9265, + .max_rate = 125000000UL, + .scale_table = ad9265_scale_table, + .num_scales = ARRAY_SIZE(ad9265_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), }, + .default_output_mode = AD9265_DEF_OUTPUT_MODE, + .vref_mask = AD9265_REG_VREF_MASK, }; static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) @@ -454,9 +451,7 @@ static int ad9467_probe(struct spi_device *spi) unsigned int id; int ret; - info = of_device_get_match_data(&spi->dev); - if (!info) - info = (void *)spi_get_device_id(spi)->driver_data; + info = spi_get_device_match_data(spi); if (!info) return -ENODEV; @@ -506,17 +501,17 @@ static int ad9467_probe(struct spi_device *spi) } static const struct of_device_id ad9467_of_match[] = { - { .compatible = "adi,ad9265", .data = &ad9467_chip_tbl[ID_AD9265], }, - { .compatible = "adi,ad9434", .data = &ad9467_chip_tbl[ID_AD9434], }, - { .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], }, + { .compatible = "adi,ad9265", .data = &ad9265_chip_tbl, }, + { .compatible = "adi,ad9434", .data = &ad9434_chip_tbl, }, + { .compatible = "adi,ad9467", .data = &ad9467_chip_tbl, }, {} }; MODULE_DEVICE_TABLE(of, ad9467_of_match); static const struct spi_device_id ad9467_ids[] = { - { "ad9265", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9265] }, - { "ad9434", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9434] }, - { "ad9467", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9467] }, + { "ad9265", (kernel_ulong_t)&ad9265_chip_tbl }, + { "ad9434", (kernel_ulong_t)&ad9434_chip_tbl }, + { "ad9467", (kernel_ulong_t)&ad9467_chip_tbl }, {} }; MODULE_DEVICE_TABLE(spi, ad9467_ids); diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index ae83ada7f9..c247ff1541 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -62,7 +63,7 @@ struct adi_axi_adc_state { struct mutex lock; struct adi_axi_adc_client *client; - void __iomem *regs; + struct regmap *regmap; }; struct adi_axi_adc_client { @@ -90,19 +91,6 @@ void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv) } EXPORT_SYMBOL_NS_GPL(adi_axi_adc_conv_priv, IIO_ADI_AXI); -static void adi_axi_adc_write(struct adi_axi_adc_state *st, - unsigned int reg, - unsigned int val) -{ - iowrite32(val, st->regs + reg); -} - -static unsigned int adi_axi_adc_read(struct adi_axi_adc_state *st, - unsigned int reg) -{ - return ioread32(st->regs + reg); -} - static int adi_axi_adc_config_dma_buffer(struct device *dev, struct iio_dev *indio_dev) { @@ -163,17 +151,20 @@ static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev, { struct adi_axi_adc_state *st = iio_priv(indio_dev); struct adi_axi_adc_conv *conv = &st->client->conv; - unsigned int i, ctrl; + unsigned int i; + int ret; for (i = 0; i < conv->chip_info->num_channels; i++) { - ctrl = adi_axi_adc_read(st, ADI_AXI_REG_CHAN_CTRL(i)); - if (test_bit(i, scan_mask)) - ctrl |= ADI_AXI_REG_CHAN_CTRL_ENABLE; + ret = regmap_set_bits(st->regmap, + ADI_AXI_REG_CHAN_CTRL(i), + ADI_AXI_REG_CHAN_CTRL_ENABLE); else - ctrl &= ~ADI_AXI_REG_CHAN_CTRL_ENABLE; - - adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i), ctrl); + ret = regmap_clear_bits(st->regmap, + ADI_AXI_REG_CHAN_CTRL(i), + ADI_AXI_REG_CHAN_CTRL_ENABLE); + if (ret) + return ret; } return 0; @@ -310,21 +301,32 @@ static int adi_axi_adc_setup_channels(struct device *dev, } for (i = 0; i < conv->chip_info->num_channels; i++) { - adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_DEFAULTS); + ret = regmap_write(st->regmap, ADI_AXI_REG_CHAN_CTRL(i), + ADI_AXI_REG_CHAN_CTRL_DEFAULTS); + if (ret) + return ret; } return 0; } -static void axi_adc_reset(struct adi_axi_adc_state *st) +static int axi_adc_reset(struct adi_axi_adc_state *st) { - adi_axi_adc_write(st, ADI_AXI_REG_RSTN, 0); + int ret; + + ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); + if (ret) + return ret; + mdelay(10); - adi_axi_adc_write(st, ADI_AXI_REG_RSTN, ADI_AXI_REG_RSTN_MMCM_RSTN); + ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, + ADI_AXI_REG_RSTN_MMCM_RSTN); + if (ret) + return ret; + mdelay(10); - adi_axi_adc_write(st, ADI_AXI_REG_RSTN, - ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN); + return regmap_write(st->regmap, ADI_AXI_REG_RSTN, + ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN); } static void adi_axi_adc_cleanup(void *data) @@ -335,12 +337,20 @@ static void adi_axi_adc_cleanup(void *data) module_put(cl->dev->driver->owner); } +static const struct regmap_config axi_adc_regmap_config = { + .val_bits = 32, + .reg_bits = 32, + .reg_stride = 4, + .max_register = 0x0800, +}; + static int adi_axi_adc_probe(struct platform_device *pdev) { struct adi_axi_adc_conv *conv; struct iio_dev *indio_dev; struct adi_axi_adc_client *cl; struct adi_axi_adc_state *st; + void __iomem *base; unsigned int ver; int ret; @@ -361,15 +371,24 @@ static int adi_axi_adc_probe(struct platform_device *pdev) cl->state = st; mutex_init(&st->lock); - st->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(st->regs)) - return PTR_ERR(st->regs); + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + st->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &axi_adc_regmap_config); + if (IS_ERR(st->regmap)) + return PTR_ERR(st->regmap); conv = &st->client->conv; - axi_adc_reset(st); + ret = axi_adc_reset(st); + if (ret) + return ret; - ver = adi_axi_adc_read(st, ADI_AXI_REG_VERSION); + ret = regmap_read(st->regmap, ADI_AXI_REG_VERSION, &ver); + if (ret) + return ret; if (cl->info->version > ver) { dev_err(&pdev->dev, diff --git a/drivers/iio/adc/max34408.c b/drivers/iio/adc/max34408.c new file mode 100644 index 0000000000..6c2ea2bc52 --- /dev/null +++ b/drivers/iio/adc/max34408.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IIO driver for Maxim MAX34409/34408 ADC, 4-Channels/2-Channels, 8bits, I2C + * + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf + * + * TODO: ALERT interrupt, Overcurrent delay, Shutdown delay + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MAX34408_STATUS_REG 0x0 +#define MAX34408_CONTROL_REG 0x1 +#define MAX34408_OCDELAY_REG 0x2 +#define MAX34408_SDDELAY_REG 0x3 + +#define MAX34408_ADC1_REG 0x4 +#define MAX34408_ADC2_REG 0x5 +/* ADC3 & ADC4 always returns 0x0 on 34408 */ +#define MAX34409_ADC3_REG 0x6 +#define MAX34409_ADC4_REG 0x7 + +#define MAX34408_OCT1_REG 0x8 +#define MAX34408_OCT2_REG 0x9 +#define MAX34409_OCT3_REG 0xA +#define MAX34409_OCT4_REG 0xB + +#define MAX34408_DID_REG 0xC +#define MAX34408_DCYY_REG 0xD +#define MAX34408_DCWW_REG 0xE + +/* Bit masks for status register */ +#define MAX34408_STATUS_OC_MSK GENMASK(1, 0) +#define MAX34409_STATUS_OC_MSK GENMASK(3, 0) +#define MAX34408_STATUS_SHTDN BIT(4) +#define MAX34408_STATUS_ENA BIT(5) + +/* Bit masks for control register */ +#define MAX34408_CONTROL_AVG0 BIT(0) +#define MAX34408_CONTROL_AVG1 BIT(1) +#define MAX34408_CONTROL_AVG2 BIT(2) +#define MAX34408_CONTROL_ALERT BIT(3) + +#define MAX34408_DEFAULT_AVG 0x4 + +/* Bit masks for over current delay */ +#define MAX34408_OCDELAY_OCD_MSK GENMASK(6, 0) +#define MAX34408_OCDELAY_RESET BIT(7) + +/* Bit masks for shutdown delay */ +#define MAX34408_SDDELAY_SHD_MSK GENMASK(6, 0) +#define MAX34408_SDDELAY_RESET BIT(7) + +#define MAX34408_DEFAULT_RSENSE 1000 + +/** + * struct max34408_data - max34408/max34409 specific data. + * @regmap: device register map. + * @dev: max34408 device. + * @lock: lock for protecting access to device hardware registers, mostly + * for read modify write cycles for control registers. + * @input_rsense: Rsense values in uOhm, will be overwritten by + * values from channel nodes. + */ +struct max34408_data { + struct regmap *regmap; + struct device *dev; + struct mutex lock; + u32 input_rsense[4]; +}; + +static const struct regmap_config max34408_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX34408_DCWW_REG, +}; + +struct max34408_adc_model_data { + const char *model_name; + const struct iio_chan_spec *channels; + const int num_channels; +}; + +#define MAX34008_CHANNEL(_index, _address) \ + { \ + .type = IIO_CURRENT, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .channel = (_index), \ + .address = (_address), \ + .indexed = 1, \ + } + +static const struct iio_chan_spec max34408_channels[] = { + MAX34008_CHANNEL(0, MAX34408_ADC1_REG), + MAX34008_CHANNEL(1, MAX34408_ADC2_REG), +}; + +static const struct iio_chan_spec max34409_channels[] = { + MAX34008_CHANNEL(0, MAX34408_ADC1_REG), + MAX34008_CHANNEL(1, MAX34408_ADC2_REG), + MAX34008_CHANNEL(2, MAX34409_ADC3_REG), + MAX34008_CHANNEL(3, MAX34409_ADC4_REG), +}; + +static int max34408_read_adc_avg(struct max34408_data *max34408, + const struct iio_chan_spec *chan, int *val) +{ + unsigned int ctrl; + int rc; + + guard(mutex)(&max34408->lock); + rc = regmap_read(max34408->regmap, MAX34408_CONTROL_REG, (u32 *)&ctrl); + if (rc) + return rc; + + /* set averaging (0b100) default values*/ + rc = regmap_write(max34408->regmap, MAX34408_CONTROL_REG, + MAX34408_DEFAULT_AVG); + if (rc) { + dev_err(max34408->dev, + "Error (%d) writing control register\n", rc); + return rc; + } + + rc = regmap_read(max34408->regmap, chan->address, val); + if (rc) + return rc; + + /* back to old values */ + rc = regmap_write(max34408->regmap, MAX34408_CONTROL_REG, ctrl); + if (rc) + dev_err(max34408->dev, + "Error (%d) writing control register\n", rc); + + return rc; +} + +static int max34408_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max34408_data *max34408 = iio_priv(indio_dev); + int rc; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + rc = max34408_read_adc_avg(max34408, chan, val); + if (rc) + return rc; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* + * calcluate current for 8bit ADC with Rsense + * value. + * 10 mV * 1000 / Rsense uOhm = max current + * (max current * adc val * 1000) / (2^8 - 1) mA + */ + *val = 10000 / max34408->input_rsense[chan->channel]; + *val2 = 8; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static const struct iio_info max34408_info = { + .read_raw = max34408_read_raw, +}; + +static const struct max34408_adc_model_data max34408_model_data = { + .model_name = "max34408", + .channels = max34408_channels, + .num_channels = 2, +}; + +static const struct max34408_adc_model_data max34409_model_data = { + .model_name = "max34409", + .channels = max34409_channels, + .num_channels = 4, +}; + +static int max34408_probe(struct i2c_client *client) +{ + const struct max34408_adc_model_data *model_data; + struct device *dev = &client->dev; + struct max34408_data *max34408; + struct fwnode_handle *node; + struct iio_dev *indio_dev; + struct regmap *regmap; + int rc, i = 0; + + model_data = i2c_get_match_data(client); + if (!model_data) + return -EINVAL; + + regmap = devm_regmap_init_i2c(client, &max34408_regmap_config); + if (IS_ERR(regmap)) { + dev_err_probe(dev, PTR_ERR(regmap), + "regmap_init failed\n"); + return PTR_ERR(regmap); + } + + indio_dev = devm_iio_device_alloc(dev, sizeof(*max34408)); + if (!indio_dev) + return -ENOMEM; + + max34408 = iio_priv(indio_dev); + max34408->regmap = regmap; + max34408->dev = dev; + mutex_init(&max34408->lock); + + device_for_each_child_node(dev, node) { + fwnode_property_read_u32(node, "maxim,rsense-val-micro-ohms", + &max34408->input_rsense[i]); + i++; + } + + /* disable ALERT and averaging */ + rc = regmap_write(max34408->regmap, MAX34408_CONTROL_REG, 0x0); + if (rc) + return rc; + + indio_dev->channels = model_data->channels; + indio_dev->num_channels = model_data->num_channels; + indio_dev->name = model_data->model_name; + + indio_dev->info = &max34408_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id max34408_of_match[] = { + { + .compatible = "maxim,max34408", + .data = &max34408_model_data, + }, + { + .compatible = "maxim,max34409", + .data = &max34409_model_data, + }, + {} +}; +MODULE_DEVICE_TABLE(of, max34408_of_match); + +static const struct i2c_device_id max34408_id[] = { + { "max34408", (kernel_ulong_t)&max34408_model_data }, + { "max34409", (kernel_ulong_t)&max34409_model_data }, + {} +}; +MODULE_DEVICE_TABLE(i2c, max34408_id); + +static struct i2c_driver max34408_driver = { + .driver = { + .name = "max34408", + .of_match_table = max34408_of_match, + }, + .probe = max34408_probe, + .id_table = max34408_id, +}; +module_i2c_driver(max34408_driver); + +MODULE_AUTHOR("Ivan Mikhaylov "); +MODULE_DESCRIPTION("Maxim MAX34408/34409 ADC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c index d864558bc0..7a32e7a1be 100644 --- a/drivers/iio/adc/mcp3911.c +++ b/drivers/iio/adc/mcp3911.c @@ -7,6 +7,7 @@ */ #include #include +#include #include #include #include @@ -316,47 +317,37 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev, int *val2, long mask) { struct mcp3911 *adc = iio_priv(indio_dev); - int ret = -EINVAL; + int ret; - mutex_lock(&adc->lock); + guard(mutex)(&adc->lock); switch (mask) { case IIO_CHAN_INFO_RAW: ret = mcp3911_read(adc, MCP3911_CHANNEL(channel->channel), val, 3); if (ret) - goto out; + return ret; *val = sign_extend32(*val, 23); - - ret = IIO_VAL_INT; - break; - + return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - ret = adc->chip->get_offset(adc, channel->channel, val); if (ret) - goto out; + return ret; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: ret = adc->chip->get_osr(adc, val); if (ret) - goto out; - - ret = IIO_VAL_INT; - break; + return ret; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][0]; *val2 = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][1]; - ret = IIO_VAL_INT_PLUS_NANO; - break; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; } - -out: - mutex_unlock(&adc->lock); - return ret; } static int mcp3911_write_raw(struct iio_dev *indio_dev, @@ -364,9 +355,8 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, int val2, long mask) { struct mcp3911 *adc = iio_priv(indio_dev); - int ret = -EINVAL; - mutex_lock(&adc->lock); + guard(mutex)(&adc->lock); switch (mask) { case IIO_CHAN_INFO_SCALE: for (int i = 0; i < MCP3911_NUM_SCALES; i++) { @@ -374,32 +364,25 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, val2 == mcp3911_scale_table[i][1]) { adc->gain[channel->channel] = BIT(i); - ret = adc->chip->set_scale(adc, channel->channel, i); + return adc->chip->set_scale(adc, channel->channel, i); } } - break; + return -EINVAL; case IIO_CHAN_INFO_OFFSET: - if (val2 != 0) { - ret = -EINVAL; - goto out; - } - - ret = adc->chip->set_offset(adc, channel->channel, val); - break; + if (val2 != 0) + return -EINVAL; + return adc->chip->set_offset(adc, channel->channel, val); case IIO_CHAN_INFO_OVERSAMPLING_RATIO: for (int i = 0; i < ARRAY_SIZE(mcp3911_osr_table); i++) { if (val == mcp3911_osr_table[i]) { - ret = adc->chip->set_osr(adc, i); - break; + return adc->chip->set_osr(adc, i); } } - break; + return -EINVAL; + default: + return -EINVAL; } - -out: - mutex_unlock(&adc->lock); - return ret; } static int mcp3911_calc_scale_table(struct mcp3911 *adc) @@ -532,7 +515,7 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p) int i = 0; int ret; - mutex_lock(&adc->lock); + guard(mutex)(&adc->lock); adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr); ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer)); if (ret < 0) { @@ -549,7 +532,6 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p) iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan, iio_get_time_ns(indio_dev)); out: - mutex_unlock(&adc->lock); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c index e87d35d50a..ed4d729226 100644 --- a/drivers/iio/amplifiers/hmc425a.c +++ b/drivers/iio/amplifiers/hmc425a.c @@ -5,6 +5,7 @@ * Copyright 2020 Analog Devices Inc. */ +#include #include #include #include @@ -22,6 +23,7 @@ enum hmc425a_type { ID_HMC425A, ID_HMC540S, + ID_ADRF5740 }; struct hmc425a_chip_info { @@ -74,6 +76,10 @@ static int hmc425a_read_raw(struct iio_dev *indio_dev, case ID_HMC540S: gain = ~code * -1000; break; + case ID_ADRF5740: + code = code & BIT(3) ? code & ~BIT(2) : code; + gain = code * -2000; + break; } *val = gain / 1000; @@ -113,6 +119,10 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev, case ID_HMC540S: code = ~((abs(gain) / 1000) & 0xF); break; + case ID_ADRF5740: + code = (abs(gain) / 2000) & 0xF; + code = code & BIT(3) ? code | BIT(2) : code; + break; } mutex_lock(&st->lock); @@ -165,6 +175,7 @@ static const struct iio_chan_spec hmc425a_channels[] = { static const struct of_device_id hmc425a_of_match[] = { { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A }, { .compatible = "adi,hmc540s", .data = (void *)ID_HMC540S }, + { .compatible = "adi,adrf5740", .data = (void *)ID_ADRF5740 }, {}, }; MODULE_DEVICE_TABLE(of, hmc425a_of_match); @@ -188,6 +199,15 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_max = 0, .default_gain = -0x10, /* set default gain -15.0db*/ }, + [ID_ADRF5740] = { + .name = "adrf5740", + .channels = hmc425a_channels, + .num_channels = ARRAY_SIZE(hmc425a_channels), + .num_gpios = 4, + .gain_min = -22000, + .gain_max = 0, + .default_gain = 0xF, /* set default gain -22.0db*/ + }, }; static int hmc425a_probe(struct platform_device *pdev) @@ -229,6 +249,9 @@ static int hmc425a_probe(struct platform_device *pdev) indio_dev->info = &hmc425a_info; indio_dev->modes = INDIO_DIRECT_MODE; + /* Set default gain */ + hmc425a_write(indio_dev, st->gain); + return devm_iio_device_register(&pdev->dev, indio_dev); } diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c index d348af8b97..5610ba6792 100644 --- a/drivers/iio/buffer/industrialio-buffer-dma.c +++ b/drivers/iio/buffer/industrialio-buffer-dma.c @@ -179,7 +179,7 @@ static struct iio_dma_buffer_block *iio_dma_buffer_alloc_block( } block->size = size; - block->state = IIO_BLOCK_STATE_DEQUEUED; + block->state = IIO_BLOCK_STATE_DONE; block->queue = queue; INIT_LIST_HEAD(&block->head); kref_init(&block->kref); @@ -191,16 +191,8 @@ static struct iio_dma_buffer_block *iio_dma_buffer_alloc_block( static void _iio_dma_buffer_block_done(struct iio_dma_buffer_block *block) { - struct iio_dma_buffer_queue *queue = block->queue; - - /* - * The buffer has already been freed by the application, just drop the - * reference. - */ - if (block->state != IIO_BLOCK_STATE_DEAD) { + if (block->state != IIO_BLOCK_STATE_DEAD) block->state = IIO_BLOCK_STATE_DONE; - list_add_tail(&block->head, &queue->outgoing); - } } /** @@ -261,7 +253,6 @@ static bool iio_dma_block_reusable(struct iio_dma_buffer_block *block) * not support abort and has not given back the block yet. */ switch (block->state) { - case IIO_BLOCK_STATE_DEQUEUED: case IIO_BLOCK_STATE_QUEUED: case IIO_BLOCK_STATE_DONE: return true; @@ -317,7 +308,6 @@ int iio_dma_buffer_request_update(struct iio_buffer *buffer) * dead. This means we can reset the lists without having to fear * corrution. */ - INIT_LIST_HEAD(&queue->outgoing); spin_unlock_irq(&queue->list_lock); INIT_LIST_HEAD(&queue->incoming); @@ -356,6 +346,29 @@ out_unlock: } EXPORT_SYMBOL_GPL(iio_dma_buffer_request_update); +static void iio_dma_buffer_fileio_free(struct iio_dma_buffer_queue *queue) +{ + unsigned int i; + + spin_lock_irq(&queue->list_lock); + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { + if (!queue->fileio.blocks[i]) + continue; + queue->fileio.blocks[i]->state = IIO_BLOCK_STATE_DEAD; + } + spin_unlock_irq(&queue->list_lock); + + INIT_LIST_HEAD(&queue->incoming); + + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { + if (!queue->fileio.blocks[i]) + continue; + iio_buffer_block_put(queue->fileio.blocks[i]); + queue->fileio.blocks[i] = NULL; + } + queue->fileio.active_block = NULL; +} + static void iio_dma_buffer_submit_block(struct iio_dma_buffer_queue *queue, struct iio_dma_buffer_block *block) { @@ -456,14 +469,20 @@ static struct iio_dma_buffer_block *iio_dma_buffer_dequeue( struct iio_dma_buffer_queue *queue) { struct iio_dma_buffer_block *block; + unsigned int idx; spin_lock_irq(&queue->list_lock); - block = list_first_entry_or_null(&queue->outgoing, struct - iio_dma_buffer_block, head); - if (block != NULL) { - list_del(&block->head); - block->state = IIO_BLOCK_STATE_DEQUEUED; + + idx = queue->fileio.next_dequeue; + block = queue->fileio.blocks[idx]; + + if (block->state == IIO_BLOCK_STATE_DONE) { + idx = (idx + 1) % ARRAY_SIZE(queue->fileio.blocks); + queue->fileio.next_dequeue = idx; + } else { + block = NULL; } + spin_unlock_irq(&queue->list_lock); return block; @@ -539,6 +558,7 @@ size_t iio_dma_buffer_data_available(struct iio_buffer *buf) struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buf); struct iio_dma_buffer_block *block; size_t data_available = 0; + unsigned int i; /* * For counting the available bytes we'll use the size of the block not @@ -552,8 +572,15 @@ size_t iio_dma_buffer_data_available(struct iio_buffer *buf) data_available += queue->fileio.active_block->size; spin_lock_irq(&queue->list_lock); - list_for_each_entry(block, &queue->outgoing, head) - data_available += block->size; + + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { + block = queue->fileio.blocks[i]; + + if (block != queue->fileio.active_block + && block->state == IIO_BLOCK_STATE_DONE) + data_available += block->size; + } + spin_unlock_irq(&queue->list_lock); mutex_unlock(&queue->lock); @@ -617,7 +644,6 @@ int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, queue->ops = ops; INIT_LIST_HEAD(&queue->incoming); - INIT_LIST_HEAD(&queue->outgoing); mutex_init(&queue->lock); spin_lock_init(&queue->list_lock); @@ -635,28 +661,9 @@ EXPORT_SYMBOL_GPL(iio_dma_buffer_init); */ void iio_dma_buffer_exit(struct iio_dma_buffer_queue *queue) { - unsigned int i; - mutex_lock(&queue->lock); - spin_lock_irq(&queue->list_lock); - for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { - if (!queue->fileio.blocks[i]) - continue; - queue->fileio.blocks[i]->state = IIO_BLOCK_STATE_DEAD; - } - INIT_LIST_HEAD(&queue->outgoing); - spin_unlock_irq(&queue->list_lock); - - INIT_LIST_HEAD(&queue->incoming); - - for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { - if (!queue->fileio.blocks[i]) - continue; - iio_buffer_block_put(queue->fileio.blocks[i]); - queue->fileio.blocks[i] = NULL; - } - queue->fileio.active_block = NULL; + iio_dma_buffer_fileio_free(queue); queue->ops = NULL; mutex_unlock(&queue->lock); diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index c30657e10e..02649ab81b 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -5,6 +5,17 @@ menu "Chemical Sensors" +config AOSONG_AGS02MA + tristate "Aosong AGS02MA TVOC sensor driver" + depends on I2C + select CRC8 + help + Say Y here to build support for Aosong AGS02MA TVOC (Total Volatile + Organic Compounds) sensor. + + To compile this driver as module, choose M here: the module will be + called ags02ma. + config ATLAS_PH_SENSOR tristate "Atlas Scientific OEM SM sensors" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index a11e777a7a..2f3dee8bb7 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -4,6 +4,7 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AOSONG_AGS02MA) += ags02ma.o obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-sensor.o obj-$(CONFIG_ATLAS_EZO_SENSOR) += atlas-ezo-sensor.o obj-$(CONFIG_BME680) += bme680_core.o diff --git a/drivers/iio/chemical/ags02ma.c b/drivers/iio/chemical/ags02ma.c new file mode 100644 index 0000000000..8fcd809465 --- /dev/null +++ b/drivers/iio/chemical/ags02ma.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2023 Anshul Dalal + * + * Driver for Aosong AGS02MA + * + * Datasheet: + * https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf + * Product Page: + * http://www.aosong.com/m/en/products-33.html + */ + +#include +#include +#include +#include + +#include + +#define AGS02MA_TVOC_READ_REG 0x00 +#define AGS02MA_VERSION_REG 0x11 + +#define AGS02MA_VERSION_PROCESSING_DELAY 30 +#define AGS02MA_TVOC_READ_PROCESSING_DELAY 1500 + +#define AGS02MA_CRC8_INIT 0xff +#define AGS02MA_CRC8_POLYNOMIAL 0x31 + +DECLARE_CRC8_TABLE(ags02ma_crc8_table); + +struct ags02ma_data { + struct i2c_client *client; +}; + +struct ags02ma_reading { + __be32 data; + u8 crc; +} __packed; + +static int ags02ma_register_read(struct i2c_client *client, u8 reg, u16 delay, + u32 *val) +{ + int ret; + u8 crc; + struct ags02ma_reading read_buffer; + + ret = i2c_master_send(client, ®, sizeof(reg)); + if (ret < 0) { + dev_err(&client->dev, + "Failed to send data to register 0x%x: %d", reg, ret); + return ret; + } + + /* Processing Delay, Check Table 7.7 in the datasheet */ + msleep_interruptible(delay); + + ret = i2c_master_recv(client, (u8 *)&read_buffer, sizeof(read_buffer)); + if (ret < 0) { + dev_err(&client->dev, + "Failed to receive from register 0x%x: %d", reg, ret); + return ret; + } + + crc = crc8(ags02ma_crc8_table, (u8 *)&read_buffer.data, + sizeof(read_buffer.data), AGS02MA_CRC8_INIT); + if (crc != read_buffer.crc) { + dev_err(&client->dev, "CRC error\n"); + return -EIO; + } + + *val = be32_to_cpu(read_buffer.data); + return 0; +} + +static int ags02ma_read_raw(struct iio_dev *iio_device, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + struct ags02ma_data *data = iio_priv(iio_device); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ags02ma_register_read(data->client, AGS02MA_TVOC_READ_REG, + AGS02MA_TVOC_READ_PROCESSING_DELAY, + val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* The sensor reads data as ppb */ + *val = 0; + *val2 = 100; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static const struct iio_info ags02ma_info = { + .read_raw = ags02ma_read_raw, +}; + +static const struct iio_chan_spec ags02ma_channel = { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), +}; + +static int ags02ma_probe(struct i2c_client *client) +{ + int ret; + struct ags02ma_data *data; + struct iio_dev *indio_dev; + u32 version; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + crc8_populate_msb(ags02ma_crc8_table, AGS02MA_CRC8_POLYNOMIAL); + + ret = ags02ma_register_read(client, AGS02MA_VERSION_REG, + AGS02MA_VERSION_PROCESSING_DELAY, &version); + if (ret < 0) + return dev_err_probe(&client->dev, ret, + "Failed to read device version\n"); + dev_dbg(&client->dev, "Aosong AGS02MA, Version: 0x%x", version); + + data = iio_priv(indio_dev); + data->client = client; + indio_dev->info = &ags02ma_info; + indio_dev->channels = &ags02ma_channel; + indio_dev->num_channels = 1; + indio_dev->name = "ags02ma"; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id ags02ma_id_table[] = { + { "ags02ma" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, ags02ma_id_table); + +static const struct of_device_id ags02ma_of_table[] = { + { .compatible = "aosong,ags02ma" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ags02ma_of_table); + +static struct i2c_driver ags02ma_driver = { + .driver = { + .name = "ags02ma", + .of_match_table = ags02ma_of_table, + }, + .id_table = ags02ma_id_table, + .probe = ags02ma_probe, +}; +module_i2c_driver(ags02ma_driver); + +MODULE_AUTHOR("Anshul Dalal "); +MODULE_DESCRIPTION("Aosong AGS02MA TVOC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c index e9857d93b3..b5cf15a515 100644 --- a/drivers/iio/chemical/pms7003.c +++ b/drivers/iio/chemical/pms7003.c @@ -211,13 +211,13 @@ static bool pms7003_frame_is_okay(struct pms7003_frame *frame) return checksum == pms7003_calc_checksum(frame); } -static int pms7003_receive_buf(struct serdev_device *serdev, - const unsigned char *buf, size_t size) +static ssize_t pms7003_receive_buf(struct serdev_device *serdev, const u8 *buf, + size_t size) { struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); struct pms7003_state *state = iio_priv(indio_dev); struct pms7003_frame *frame = &state->frame; - int num; + size_t num; if (!frame->expected_length) { u16 magic; diff --git a/drivers/iio/chemical/scd30_serial.c b/drivers/iio/chemical/scd30_serial.c index 3c519103d3..a47654591e 100644 --- a/drivers/iio/chemical/scd30_serial.c +++ b/drivers/iio/chemical/scd30_serial.c @@ -174,13 +174,13 @@ static int scd30_serdev_command(struct scd30_state *state, enum scd30_cmd cmd, u return 0; } -static int scd30_serdev_receive_buf(struct serdev_device *serdev, - const unsigned char *buf, size_t size) +static ssize_t scd30_serdev_receive_buf(struct serdev_device *serdev, + const u8 *buf, size_t size) { struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); struct scd30_serdev_priv *priv; struct scd30_state *state; - int num; + size_t num; if (!indio_dev) return 0; diff --git a/drivers/iio/chemical/sps30_serial.c b/drivers/iio/chemical/sps30_serial.c index 164f4b3e02..3afa89f8ac 100644 --- a/drivers/iio/chemical/sps30_serial.c +++ b/drivers/iio/chemical/sps30_serial.c @@ -74,8 +74,8 @@ static int sps30_serial_xfer(struct sps30_state *state, const unsigned char *buf } static const struct { - unsigned char byte; - unsigned char byte2; + u8 byte; + u8 byte2; } sps30_serial_bytes[] = { { 0x11, 0x31 }, { 0x13, 0x33 }, @@ -83,7 +83,7 @@ static const struct { { 0x7d, 0x5d }, }; -static int sps30_serial_put_byte(unsigned char *buf, unsigned char byte) +static int sps30_serial_put_byte(u8 *buf, u8 byte) { int i; @@ -102,7 +102,7 @@ static int sps30_serial_put_byte(unsigned char *buf, unsigned char byte) return 1; } -static char sps30_serial_get_byte(bool escaped, unsigned char byte2) +static u8 sps30_serial_get_byte(bool escaped, u8 byte2) { int i; @@ -130,8 +130,8 @@ static unsigned char sps30_serial_calc_chksum(const unsigned char *buf, size_t n return ~chksum; } -static int sps30_serial_prep_frame(unsigned char *buf, unsigned char cmd, - const unsigned char *arg, size_t arg_size) +static int sps30_serial_prep_frame(u8 *buf, u8 cmd, const u8 *arg, + size_t arg_size) { unsigned char chksum; int num = 0; @@ -210,14 +210,14 @@ static int sps30_serial_command(struct sps30_state *state, unsigned char cmd, return rsp_size; } -static int sps30_serial_receive_buf(struct serdev_device *serdev, - const unsigned char *buf, size_t size) +static ssize_t sps30_serial_receive_buf(struct serdev_device *serdev, + const u8 *buf, size_t size) { struct iio_dev *indio_dev = dev_get_drvdata(&serdev->dev); struct sps30_serial_priv *priv; struct sps30_state *state; - unsigned char byte; size_t i; + u8 byte; if (!indio_dev) return 0; diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 93b8be183d..34eb40bb95 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -400,6 +400,16 @@ config MCP4728 To compile this driver as a module, choose M here: the module will be called mcp4728. +config MCP4821 + tristate "MCP4801/02/11/12/21/22 DAC driver" + depends on SPI + help + Say yes here to build the driver for the Microchip MCP4801 + MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822 DAC devices. + + To compile this driver as a module, choose M here: the module + will be called mcp4821. + config MCP4922 tristate "MCP4902, MCP4912, MCP4922 DAC driver" depends on SPI diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 5b2bac900d..55bf89739d 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_MAX5522) += max5522.o obj-$(CONFIG_MAX5821) += max5821.o obj-$(CONFIG_MCP4725) += mcp4725.o obj-$(CONFIG_MCP4728) += mcp4728.o +obj-$(CONFIG_MCP4821) += mcp4821.o obj-$(CONFIG_MCP4922) += mcp4922.o obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o obj-$(CONFIG_STM32_DAC) += stm32-dac.o diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c index a4167454da..75b549827e 100644 --- a/drivers/iio/dac/ad5791.c +++ b/drivers/iio/dac/ad5791.c @@ -345,6 +345,7 @@ static int ad5791_probe(struct spi_device *spi) struct iio_dev *indio_dev; struct ad5791_state *st; int ret, pos_voltage_uv = 0, neg_voltage_uv = 0; + bool use_rbuf_gain2; indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); if (!indio_dev) @@ -379,6 +380,12 @@ static int ad5791_probe(struct spi_device *spi) st->pwr_down = true; st->spi = spi; + if (pdata) + use_rbuf_gain2 = pdata->use_rbuf_gain2; + else + use_rbuf_gain2 = device_property_read_bool(&spi->dev, + "adi,rbuf-gain2-en"); + if (!IS_ERR(st->reg_vss) && !IS_ERR(st->reg_vdd)) { st->vref_mv = (pos_voltage_uv + neg_voltage_uv) / 1000; st->vref_neg_mv = neg_voltage_uv / 1000; @@ -398,7 +405,7 @@ static int ad5791_probe(struct spi_device *spi) st->ctrl = AD5761_CTRL_LINCOMP(st->chip_info->get_lin_comp(st->vref_mv)) - | ((pdata && pdata->use_rbuf_gain2) ? 0 : AD5791_CTRL_RBUF) | + | (use_rbuf_gain2 ? 0 : AD5791_CTRL_RBUF) | AD5791_CTRL_BIN2SC; ret = ad5791_spi_write(st, AD5791_ADDR_CTRL, st->ctrl | diff --git a/drivers/iio/dac/mcp4821.c b/drivers/iio/dac/mcp4821.c new file mode 100644 index 0000000000..8a0480d338 --- /dev/null +++ b/drivers/iio/dac/mcp4821.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2023 Anshul Dalal + * + * Driver for Microchip MCP4801, MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822 + * + * Based on the work of: + * Michael Welling (MCP4922 Driver) + * + * Datasheet: + * MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf + * MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf + * + * TODO: + * - Configurable gain + * - Regulator control + */ + +#include +#include +#include + +#include +#include + +#include + +#define MCP4821_ACTIVE_MODE BIT(12) +#define MCP4802_SECOND_CHAN BIT(15) + +/* DAC uses an internal Voltage reference of 4.096V at a gain of 2x */ +#define MCP4821_2X_GAIN_VREF_MV 4096 + +enum mcp4821_supported_drvice_ids { + ID_MCP4801, + ID_MCP4802, + ID_MCP4811, + ID_MCP4812, + ID_MCP4821, + ID_MCP4822, +}; + +struct mcp4821_state { + struct spi_device *spi; + u16 dac_value[2]; +}; + +struct mcp4821_chip_info { + const char *name; + int num_channels; + const struct iio_chan_spec channels[2]; +}; + +#define MCP4821_CHAN(channel_id, resolution) \ + { \ + .type = IIO_VOLTAGE, .output = 1, .indexed = 1, \ + .channel = (channel_id), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .scan_type = { \ + .realbits = (resolution), \ + .shift = 12 - (resolution), \ + }, \ + } + +static const struct mcp4821_chip_info mcp4821_chip_info_table[6] = { + [ID_MCP4801] = { + .name = "mcp4801", + .num_channels = 1, + .channels = { + MCP4821_CHAN(0, 8), + }, + }, + [ID_MCP4802] = { + .name = "mcp4802", + .num_channels = 2, + .channels = { + MCP4821_CHAN(0, 8), + MCP4821_CHAN(1, 8), + }, + }, + [ID_MCP4811] = { + .name = "mcp4811", + .num_channels = 1, + .channels = { + MCP4821_CHAN(0, 10), + }, + }, + [ID_MCP4812] = { + .name = "mcp4812", + .num_channels = 2, + .channels = { + MCP4821_CHAN(0, 10), + MCP4821_CHAN(1, 10), + }, + }, + [ID_MCP4821] = { + .name = "mcp4821", + .num_channels = 1, + .channels = { + MCP4821_CHAN(0, 12), + }, + }, + [ID_MCP4822] = { + .name = "mcp4822", + .num_channels = 2, + .channels = { + MCP4821_CHAN(0, 12), + MCP4821_CHAN(1, 12), + }, + }, +}; + +static int mcp4821_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct mcp4821_state *state; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + state = iio_priv(indio_dev); + *val = state->dac_value[chan->channel]; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = MCP4821_2X_GAIN_VREF_MV; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static int mcp4821_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct mcp4821_state *state = iio_priv(indio_dev); + u16 write_val; + __be16 write_buffer; + int ret; + + if (val2 != 0) + return -EINVAL; + + if (val < 0 || val >= BIT(chan->scan_type.realbits)) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + write_val = MCP4821_ACTIVE_MODE | val << chan->scan_type.shift; + if (chan->channel) + write_val |= MCP4802_SECOND_CHAN; + + write_buffer = cpu_to_be16(write_val); + ret = spi_write(state->spi, &write_buffer, sizeof(write_buffer)); + if (ret) { + dev_err(&state->spi->dev, "Failed to write to device: %d", ret); + return ret; + } + + state->dac_value[chan->channel] = val; + + return 0; +} + +static const struct iio_info mcp4821_info = { + .read_raw = &mcp4821_read_raw, + .write_raw = &mcp4821_write_raw, +}; + +static int mcp4821_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct mcp4821_state *state; + const struct mcp4821_chip_info *info; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*state)); + if (indio_dev == NULL) + return -ENOMEM; + + state = iio_priv(indio_dev); + state->spi = spi; + + info = spi_get_device_match_data(spi); + indio_dev->name = info->name; + indio_dev->info = &mcp4821_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = info->channels; + indio_dev->num_channels = info->num_channels; + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +#define MCP4821_COMPATIBLE(of_compatible, id) \ + { \ + .compatible = of_compatible, \ + .data = &mcp4821_chip_info_table[id] \ + } + +static const struct of_device_id mcp4821_of_table[] = { + MCP4821_COMPATIBLE("microchip,mcp4801", ID_MCP4801), + MCP4821_COMPATIBLE("microchip,mcp4802", ID_MCP4802), + MCP4821_COMPATIBLE("microchip,mcp4811", ID_MCP4811), + MCP4821_COMPATIBLE("microchip,mcp4812", ID_MCP4812), + MCP4821_COMPATIBLE("microchip,mcp4821", ID_MCP4821), + MCP4821_COMPATIBLE("microchip,mcp4822", ID_MCP4822), + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mcp4821_of_table); + +static const struct spi_device_id mcp4821_id_table[] = { + { "mcp4801", (kernel_ulong_t)&mcp4821_chip_info_table[ID_MCP4801]}, + { "mcp4802", (kernel_ulong_t)&mcp4821_chip_info_table[ID_MCP4802]}, + { "mcp4811", (kernel_ulong_t)&mcp4821_chip_info_table[ID_MCP4811]}, + { "mcp4812", (kernel_ulong_t)&mcp4821_chip_info_table[ID_MCP4812]}, + { "mcp4821", (kernel_ulong_t)&mcp4821_chip_info_table[ID_MCP4821]}, + { "mcp4822", (kernel_ulong_t)&mcp4821_chip_info_table[ID_MCP4822]}, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, mcp4821_id_table); + +static struct spi_driver mcp4821_driver = { + .driver = { + .name = "mcp4821", + .of_match_table = mcp4821_of_table, + }, + .probe = mcp4821_probe, + .id_table = mcp4821_id_table, +}; +module_spi_driver(mcp4821_driver); + +MODULE_AUTHOR("Anshul Dalal "); +MODULE_DESCRIPTION("Microchip MCP4821 DAC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/frequency/adf4377.c b/drivers/iio/frequency/adf4377.c index 26abecbd51..9284c13f1a 100644 --- a/drivers/iio/frequency/adf4377.c +++ b/drivers/iio/frequency/adf4377.c @@ -870,7 +870,6 @@ static const struct iio_chan_spec adf4377_channels[] = { static int adf4377_properties_parse(struct adf4377_state *st) { struct spi_device *spi = st->spi; - const char *str; int ret; st->clkin = devm_clk_get_enabled(&spi->dev, "ref_in"); @@ -896,16 +895,13 @@ static int adf4377_properties_parse(struct adf4377_state *st) return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk2), "failed to get the CE GPIO\n"); - ret = device_property_read_string(&spi->dev, "adi,muxout-select", &str); - if (ret) { - st->muxout_select = ADF4377_MUXOUT_HIGH_Z; - } else { - ret = match_string(adf4377_muxout_modes, ARRAY_SIZE(adf4377_muxout_modes), str); - if (ret < 0) - return ret; - + ret = device_property_match_property_string(&spi->dev, "adi,muxout-select", + adf4377_muxout_modes, + ARRAY_SIZE(adf4377_muxout_modes)); + if (ret >= 0) st->muxout_select = ret; - } + else + st->muxout_select = ADF4377_MUXOUT_HIGH_Z; return 0; } diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c index bb5e1feef4..b46b73b89e 100644 --- a/drivers/iio/frequency/admv1014.c +++ b/drivers/iio/frequency/admv1014.c @@ -710,7 +710,6 @@ static int admv1014_init(struct admv1014_state *st) static int admv1014_properties_parse(struct admv1014_state *st) { - const char *str; unsigned int i; struct spi_device *spi = st->spi; int ret; @@ -719,27 +718,21 @@ static int admv1014_properties_parse(struct admv1014_state *st) st->p1db_comp = device_property_read_bool(&spi->dev, "adi,p1db-compensation-enable"); - ret = device_property_read_string(&spi->dev, "adi,input-mode", &str); - if (ret) { - st->input_mode = ADMV1014_IQ_MODE; - } else { - ret = match_string(input_mode_names, ARRAY_SIZE(input_mode_names), str); - if (ret < 0) - return ret; - + ret = device_property_match_property_string(&spi->dev, "adi,input-mode", + input_mode_names, + ARRAY_SIZE(input_mode_names)); + if (ret >= 0) st->input_mode = ret; - } - - ret = device_property_read_string(&spi->dev, "adi,quad-se-mode", &str); - if (ret) { - st->quad_se_mode = ADMV1014_SE_MODE_POS; - } else { - ret = match_string(quad_se_mode_names, ARRAY_SIZE(quad_se_mode_names), str); - if (ret < 0) - return ret; + else + st->input_mode = ADMV1014_IQ_MODE; + ret = device_property_match_property_string(&spi->dev, "adi,quad-se-mode", + quad_se_mode_names, + ARRAY_SIZE(quad_se_mode_names)); + if (ret >= 0) st->quad_se_mode = ADMV1014_SE_MODE_POS + (ret * 3); - } + else + st->quad_se_mode = ADMV1014_SE_MODE_POS; for (i = 0; i < ADMV1014_NUM_REGULATORS; ++i) st->regulators[i].supply = admv1014_reg_name[i]; diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 2de5494e7c..b15b7a3b66 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -48,6 +48,18 @@ config HDC2010 To compile this driver as a module, choose M here: the module will be called hdc2010. +config HDC3020 + tristate "TI HDC3020 relative humidity and temperature sensor" + depends on I2C + select CRC8 + help + Say yes here to build support for the Texas Instruments + HDC3020, HDC3021 and HDC3022 relative humidity and temperature + sensors. + + To compile this driver as a module, choose M here: the module + will be called hdc3020. + config HID_SENSOR_HUMIDITY tristate "HID Environmental humidity sensor" depends on HID_SENSOR_HUB diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile index f19ff3de97..5fbeef299f 100644 --- a/drivers/iio/humidity/Makefile +++ b/drivers/iio/humidity/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HDC2010) += hdc2010.o +obj-$(CONFIG_HDC3020) += hdc3020.o obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o hts221-y := hts221_core.o \ diff --git a/drivers/iio/humidity/hdc3020.c b/drivers/iio/humidity/hdc3020.c new file mode 100644 index 0000000000..ed70415512 --- /dev/null +++ b/drivers/iio/humidity/hdc3020.c @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * hdc3020.c - Support for the TI HDC3020,HDC3021 and HDC3022 + * temperature + relative humidity sensors + * + * Copyright (C) 2023 + * + * Datasheet: https://www.ti.com/lit/ds/symlink/hdc3020.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#define HDC3020_HEATER_CMD_MSB 0x30 /* shared by all heater commands */ +#define HDC3020_HEATER_ENABLE 0x6D +#define HDC3020_HEATER_DISABLE 0x66 +#define HDC3020_HEATER_CONFIG 0x6E + +#define HDC3020_READ_RETRY_TIMES 10 +#define HDC3020_BUSY_DELAY_MS 10 + +#define HDC3020_CRC8_POLYNOMIAL 0x31 + +static const u8 HDC3020_S_AUTO_10HZ_MOD0[2] = { 0x27, 0x37 }; + +static const u8 HDC3020_EXIT_AUTO[2] = { 0x30, 0x93 }; + +static const u8 HDC3020_R_T_RH_AUTO[2] = { 0xE0, 0x00 }; +static const u8 HDC3020_R_T_LOW_AUTO[2] = { 0xE0, 0x02 }; +static const u8 HDC3020_R_T_HIGH_AUTO[2] = { 0xE0, 0x03 }; +static const u8 HDC3020_R_RH_LOW_AUTO[2] = { 0xE0, 0x04 }; +static const u8 HDC3020_R_RH_HIGH_AUTO[2] = { 0xE0, 0x05 }; + +struct hdc3020_data { + struct i2c_client *client; + /* + * Ensure that the sensor configuration (currently only heater is + * supported) will not be changed during the process of reading + * sensor data (this driver will try HDC3020_READ_RETRY_TIMES times + * if the device does not respond). + */ + struct mutex lock; +}; + +static const int hdc3020_heater_vals[] = {0, 1, 0x3FFF}; + +static const struct iio_chan_spec hdc3020_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_PEAK) | + BIT(IIO_CHAN_INFO_TROUGH) | BIT(IIO_CHAN_INFO_OFFSET), + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_PEAK) | + BIT(IIO_CHAN_INFO_TROUGH), + }, + { + /* + * For setting the internal heater, which can be switched on to + * prevent or remove any condensation that may develop when the + * ambient environment approaches its dew point temperature. + */ + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), + .output = 1, + }, +}; + +DECLARE_CRC8_TABLE(hdc3020_crc8_table); + +static int hdc3020_write_bytes(struct hdc3020_data *data, const u8 *buf, u8 len) +{ + struct i2c_client *client = data->client; + struct i2c_msg msg; + int ret, cnt; + + msg.addr = client->addr; + msg.flags = 0; + msg.buf = (char *)buf; + msg.len = len; + + /* + * During the measurement process, HDC3020 will not return data. + * So wait for a while and try again + */ + for (cnt = 0; cnt < HDC3020_READ_RETRY_TIMES; cnt++) { + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret == 1) + return 0; + + mdelay(HDC3020_BUSY_DELAY_MS); + } + dev_err(&client->dev, "Could not write sensor command\n"); + + return -ETIMEDOUT; +} + +static int hdc3020_read_bytes(struct hdc3020_data *data, const u8 *buf, + void *val, int len) +{ + int ret, cnt; + struct i2c_client *client = data->client; + struct i2c_msg msg[2] = { + [0] = { + .addr = client->addr, + .flags = 0, + .buf = (char *)buf, + .len = 2, + }, + [1] = { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = val, + .len = len, + }, + }; + + /* + * During the measurement process, HDC3020 will not return data. + * So wait for a while and try again + */ + for (cnt = 0; cnt < HDC3020_READ_RETRY_TIMES; cnt++) { + ret = i2c_transfer(client->adapter, msg, 2); + if (ret == 2) + return 0; + + mdelay(HDC3020_BUSY_DELAY_MS); + } + dev_err(&client->dev, "Could not read sensor data\n"); + + return -ETIMEDOUT; +} + +static int hdc3020_read_measurement(struct hdc3020_data *data, + enum iio_chan_type type, int *val) +{ + u8 crc, buf[6]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_T_RH_AUTO, buf, 6); + if (ret < 0) + return ret; + + /* CRC check of the temperature measurement */ + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + /* CRC check of the relative humidity measurement */ + crc = crc8(hdc3020_crc8_table, buf + 3, 2, CRC8_INIT_VALUE); + if (crc != buf[5]) + return -EINVAL; + + if (type == IIO_TEMP) + *val = get_unaligned_be16(buf); + else if (type == IIO_HUMIDITYRELATIVE) + *val = get_unaligned_be16(&buf[3]); + else + return -EINVAL; + + return 0; +} + +/* + * After exiting the automatic measurement mode or resetting, the peak + * value will be reset to the default value + * This method is used to get the highest temp measured during automatic + * measurement + */ +static int hdc3020_read_high_peak_t(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_T_HIGH_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +/* + * This method is used to get the lowest temp measured during automatic + * measurement + */ +static int hdc3020_read_low_peak_t(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_T_LOW_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +/* + * This method is used to get the highest humidity measured during automatic + * measurement + */ +static int hdc3020_read_high_peak_rh(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_RH_HIGH_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +/* + * This method is used to get the lowest humidity measured during automatic + * measurement + */ +static int hdc3020_read_low_peak_rh(struct hdc3020_data *data, int *val) +{ + u8 crc, buf[3]; + int ret; + + ret = hdc3020_read_bytes(data, HDC3020_R_RH_LOW_AUTO, buf, 3); + if (ret < 0) + return ret; + + crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); + if (crc != buf[2]) + return -EINVAL; + + *val = get_unaligned_be16(buf); + + return 0; +} + +static int hdc3020_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct hdc3020_data *data = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_TEMP && chan->type != IIO_HUMIDITYRELATIVE) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + guard(mutex)(&data->lock); + ret = hdc3020_read_measurement(data, chan->type, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_PEAK: { + guard(mutex)(&data->lock); + if (chan->type == IIO_TEMP) { + ret = hdc3020_read_high_peak_t(data, val); + if (ret < 0) + return ret; + } else { + ret = hdc3020_read_high_peak_rh(data, val); + if (ret < 0) + return ret; + } + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_TROUGH: { + guard(mutex)(&data->lock); + if (chan->type == IIO_TEMP) { + ret = hdc3020_read_low_peak_t(data, val); + if (ret < 0) + return ret; + } else { + ret = hdc3020_read_low_peak_rh(data, val); + if (ret < 0) + return ret; + } + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_SCALE: + *val2 = 65536; + if (chan->type == IIO_TEMP) + *val = 175; + else + *val = 100; + return IIO_VAL_FRACTIONAL; + + case IIO_CHAN_INFO_OFFSET: + if (chan->type != IIO_TEMP) + return -EINVAL; + + *val = -16852; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int hdc3020_read_available(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, + int *type, int *length, long mask) +{ + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_CURRENT) + return -EINVAL; + + *vals = hdc3020_heater_vals; + *type = IIO_VAL_INT; + + return IIO_AVAIL_RANGE; +} + +static int hdc3020_update_heater(struct hdc3020_data *data, int val) +{ + u8 buf[5]; + int ret; + + if (val < hdc3020_heater_vals[0] || val > hdc3020_heater_vals[2]) + return -EINVAL; + + buf[0] = HDC3020_HEATER_CMD_MSB; + + if (!val) { + buf[1] = HDC3020_HEATER_DISABLE; + return hdc3020_write_bytes(data, buf, 2); + } + + buf[1] = HDC3020_HEATER_CONFIG; + put_unaligned_be16(val & GENMASK(13, 0), &buf[2]); + buf[4] = crc8(hdc3020_crc8_table, buf + 2, 2, CRC8_INIT_VALUE); + ret = hdc3020_write_bytes(data, buf, 5); + if (ret < 0) + return ret; + + buf[1] = HDC3020_HEATER_ENABLE; + + return hdc3020_write_bytes(data, buf, 2); +} + +static int hdc3020_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct hdc3020_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type != IIO_CURRENT) + return -EINVAL; + + guard(mutex)(&data->lock); + return hdc3020_update_heater(data, val); + } + + return -EINVAL; +} + +static const struct iio_info hdc3020_info = { + .read_raw = hdc3020_read_raw, + .write_raw = hdc3020_write_raw, + .read_avail = hdc3020_read_available, +}; + +static void hdc3020_stop(void *data) +{ + hdc3020_write_bytes((struct hdc3020_data *)data, HDC3020_EXIT_AUTO, 2); +} + +static int hdc3020_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct hdc3020_data *data; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->lock); + + crc8_populate_msb(hdc3020_crc8_table, HDC3020_CRC8_POLYNOMIAL); + + indio_dev->name = "hdc3020"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &hdc3020_info; + indio_dev->channels = hdc3020_channels; + indio_dev->num_channels = ARRAY_SIZE(hdc3020_channels); + + ret = hdc3020_write_bytes(data, HDC3020_S_AUTO_10HZ_MOD0, 2); + if (ret) + return dev_err_probe(&client->dev, ret, + "Unable to set up measurement\n"); + + ret = devm_add_action_or_reset(&data->client->dev, hdc3020_stop, data); + if (ret) + return ret; + + ret = devm_iio_device_register(&data->client->dev, indio_dev); + if (ret) + return dev_err_probe(&client->dev, ret, "Failed to add device"); + + return 0; +} + +static const struct i2c_device_id hdc3020_id[] = { + { "hdc3020" }, + { "hdc3021" }, + { "hdc3022" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, hdc3020_id); + +static const struct of_device_id hdc3020_dt_ids[] = { + { .compatible = "ti,hdc3020" }, + { .compatible = "ti,hdc3021" }, + { .compatible = "ti,hdc3022" }, + { } +}; +MODULE_DEVICE_TABLE(of, hdc3020_dt_ids); + +static struct i2c_driver hdc3020_driver = { + .driver = { + .name = "hdc3020", + .of_match_table = hdc3020_dt_ids, + }, + .probe = hdc3020_probe, + .id_table = hdc3020_id, +}; +module_i2c_driver(hdc3020_driver); + +MODULE_AUTHOR("Javier Carrasco "); +MODULE_AUTHOR("Li peiyu <579lpy@gmail.com>"); +MODULE_DESCRIPTION("TI HDC3020 humidity and temperature sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index c2f97629e9..52a155ff32 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -53,6 +53,7 @@ config ADIS16480 ADIS16485, ADIS16488 inertial sensors. source "drivers/iio/imu/bmi160/Kconfig" +source "drivers/iio/imu/bmi323/Kconfig" source "drivers/iio/imu/bno055/Kconfig" config FXOS8700 diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index 6eb6120347..7e2d7d5c3b 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o obj-y += bmi160/ +obj-y += bmi323/ obj-y += bno055/ obj-$(CONFIG_FXOS8700) += fxos8700_core.o diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c index bc40240b29..495caf4ce8 100644 --- a/drivers/iio/imu/adis.c +++ b/drivers/iio/imu/adis.c @@ -44,8 +44,6 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value, .cs_change = 1, .delay.value = adis->data->write_delay, .delay.unit = SPI_DELAY_UNIT_USECS, - .cs_change_delay.value = adis->data->cs_change_delay, - .cs_change_delay.unit = SPI_DELAY_UNIT_USECS, }, { .tx_buf = adis->tx + 2, .bits_per_word = 8, @@ -53,8 +51,6 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value, .cs_change = 1, .delay.value = adis->data->write_delay, .delay.unit = SPI_DELAY_UNIT_USECS, - .cs_change_delay.value = adis->data->cs_change_delay, - .cs_change_delay.unit = SPI_DELAY_UNIT_USECS, }, { .tx_buf = adis->tx + 4, .bits_per_word = 8, @@ -62,8 +58,6 @@ int __adis_write_reg(struct adis *adis, unsigned int reg, unsigned int value, .cs_change = 1, .delay.value = adis->data->write_delay, .delay.unit = SPI_DELAY_UNIT_USECS, - .cs_change_delay.value = adis->data->cs_change_delay, - .cs_change_delay.unit = SPI_DELAY_UNIT_USECS, }, { .tx_buf = adis->tx + 6, .bits_per_word = 8, @@ -144,8 +138,6 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val, .cs_change = 1, .delay.value = adis->data->write_delay, .delay.unit = SPI_DELAY_UNIT_USECS, - .cs_change_delay.value = adis->data->cs_change_delay, - .cs_change_delay.unit = SPI_DELAY_UNIT_USECS, }, { .tx_buf = adis->tx + 2, .bits_per_word = 8, @@ -153,8 +145,6 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val, .cs_change = 1, .delay.value = adis->data->read_delay, .delay.unit = SPI_DELAY_UNIT_USECS, - .cs_change_delay.value = adis->data->cs_change_delay, - .cs_change_delay.unit = SPI_DELAY_UNIT_USECS, }, { .tx_buf = adis->tx + 4, .rx_buf = adis->rx, @@ -163,8 +153,6 @@ int __adis_read_reg(struct adis *adis, unsigned int reg, unsigned int *val, .cs_change = 1, .delay.value = adis->data->read_delay, .delay.unit = SPI_DELAY_UNIT_USECS, - .cs_change_delay.value = adis->data->cs_change_delay, - .cs_change_delay.unit = SPI_DELAY_UNIT_USECS, }, { .rx_buf = adis->rx + 2, .bits_per_word = 8, @@ -524,6 +512,12 @@ int adis_init(struct adis *adis, struct iio_dev *indio_dev, } mutex_init(&adis->state_lock); + + if (!spi->cs_inactive.value) { + spi->cs_inactive.value = data->cs_change_delay; + spi->cs_inactive.unit = SPI_DELAY_UNIT_USECS; + } + adis->spi = spi; adis->data = data; iio_device_set_drvdata(indio_dev, adis); diff --git a/drivers/iio/imu/bmi323/Kconfig b/drivers/iio/imu/bmi323/Kconfig new file mode 100644 index 0000000000..ab37b28539 --- /dev/null +++ b/drivers/iio/imu/bmi323/Kconfig @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# BMI323 IMU driver +# + +config BMI323 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config BMI323_I2C + tristate "Bosch BMI323 I2C driver" + depends on I2C + select BMI323 + select REGMAP_I2C + help + Enable support for the Bosch BMI323 6-Axis IMU connected to I2C + interface. + + This driver can also be built as a module. If so, the module will be + called bmi323_i2c. + +config BMI323_SPI + tristate "Bosch BMI323 SPI driver" + depends on SPI + select BMI323 + select REGMAP_SPI + help + Enable support for the Bosch BMI323 6-Axis IMU connected to SPI + interface. + + This driver can also be built as a module. If so, the module will be + called bmi323_spi. diff --git a/drivers/iio/imu/bmi323/Makefile b/drivers/iio/imu/bmi323/Makefile new file mode 100644 index 0000000000..a6a6dc0207 --- /dev/null +++ b/drivers/iio/imu/bmi323/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for Bosch BMI323 IMU +# +obj-$(CONFIG_BMI323) += bmi323_core.o +obj-$(CONFIG_BMI323_I2C) += bmi323_i2c.o +obj-$(CONFIG_BMI323_SPI) += bmi323_spi.o diff --git a/drivers/iio/imu/bmi323/bmi323.h b/drivers/iio/imu/bmi323/bmi323.h new file mode 100644 index 0000000000..dff126d416 --- /dev/null +++ b/drivers/iio/imu/bmi323/bmi323.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IIO driver for Bosch BMI323 6-Axis IMU + * + * Copyright (C) 2023, Jagath Jog J + */ + +#ifndef _BMI323_H_ +#define _BMI323_H_ + +#include +#include +#include + +#define BMI323_I2C_DUMMY 2 +#define BMI323_SPI_DUMMY 1 + +/* Register map */ + +#define BMI323_CHIP_ID_REG 0x00 +#define BMI323_CHIP_ID_VAL 0x0043 +#define BMI323_CHIP_ID_MSK GENMASK(7, 0) +#define BMI323_ERR_REG 0x01 +#define BMI323_STATUS_REG 0x02 +#define BMI323_STATUS_POR_MSK BIT(0) + +/* Accelero/Gyro/Temp data registers */ +#define BMI323_ACCEL_X_REG 0x03 +#define BMI323_GYRO_X_REG 0x06 +#define BMI323_TEMP_REG 0x09 +#define BMI323_ALL_CHAN_MSK GENMASK(5, 0) + +/* Status registers */ +#define BMI323_STATUS_INT1_REG 0x0D +#define BMI323_STATUS_INT2_REG 0x0E +#define BMI323_STATUS_NOMOTION_MSK BIT(0) +#define BMI323_STATUS_MOTION_MSK BIT(1) +#define BMI323_STATUS_STP_WTR_MSK BIT(5) +#define BMI323_STATUS_TAP_MSK BIT(8) +#define BMI323_STATUS_ERROR_MSK BIT(10) +#define BMI323_STATUS_TMP_DRDY_MSK BIT(11) +#define BMI323_STATUS_GYR_DRDY_MSK BIT(12) +#define BMI323_STATUS_ACC_DRDY_MSK BIT(13) +#define BMI323_STATUS_ACC_GYR_DRDY_MSK GENMASK(13, 12) +#define BMI323_STATUS_FIFO_WTRMRK_MSK BIT(14) +#define BMI323_STATUS_FIFO_FULL_MSK BIT(15) + +/* Feature registers */ +#define BMI323_FEAT_IO0_REG 0x10 +#define BMI323_FEAT_IO0_XYZ_NOMOTION_MSK GENMASK(2, 0) +#define BMI323_FEAT_IO0_XYZ_MOTION_MSK GENMASK(5, 3) +#define BMI323_FEAT_XYZ_MSK GENMASK(2, 0) +#define BMI323_FEAT_IO0_STP_CNT_MSK BIT(9) +#define BMI323_FEAT_IO0_S_TAP_MSK BIT(12) +#define BMI323_FEAT_IO0_D_TAP_MSK BIT(13) +#define BMI323_FEAT_IO1_REG 0x11 +#define BMI323_FEAT_IO1_ERR_MSK GENMASK(3, 0) +#define BMI323_FEAT_IO2_REG 0x12 +#define BMI323_FEAT_IO_STATUS_REG 0x14 +#define BMI323_FEAT_IO_STATUS_MSK BIT(0) +#define BMI323_FEAT_ENG_POLL 2000 +#define BMI323_FEAT_ENG_TIMEOUT 10000 + +/* FIFO registers */ +#define BMI323_FIFO_FILL_LEVEL_REG 0x15 +#define BMI323_FIFO_DATA_REG 0x16 + +/* Accelero/Gyro config registers */ +#define BMI323_ACC_CONF_REG 0x20 +#define BMI323_GYRO_CONF_REG 0x21 +#define BMI323_ACC_GYRO_CONF_MODE_MSK GENMASK(14, 12) +#define BMI323_ACC_GYRO_CONF_ODR_MSK GENMASK(3, 0) +#define BMI323_ACC_GYRO_CONF_SCL_MSK GENMASK(6, 4) +#define BMI323_ACC_GYRO_CONF_BW_MSK BIT(7) +#define BMI323_ACC_GYRO_CONF_AVG_MSK GENMASK(10, 8) + +/* FIFO registers */ +#define BMI323_FIFO_WTRMRK_REG 0x35 +#define BMI323_FIFO_CONF_REG 0x36 +#define BMI323_FIFO_CONF_STP_FUL_MSK BIT(0) +#define BMI323_FIFO_CONF_ACC_GYR_EN_MSK GENMASK(10, 9) +#define BMI323_FIFO_ACC_GYR_MSK GENMASK(1, 0) +#define BMI323_FIFO_CTRL_REG 0x37 +#define BMI323_FIFO_FLUSH_MSK BIT(0) + +/* Interrupt pin config registers */ +#define BMI323_IO_INT_CTR_REG 0x38 +#define BMI323_IO_INT1_LVL_MSK BIT(0) +#define BMI323_IO_INT1_OD_MSK BIT(1) +#define BMI323_IO_INT1_OP_EN_MSK BIT(2) +#define BMI323_IO_INT1_LVL_OD_OP_MSK GENMASK(2, 0) +#define BMI323_IO_INT2_LVL_MSK BIT(8) +#define BMI323_IO_INT2_OD_MSK BIT(9) +#define BMI323_IO_INT2_OP_EN_MSK BIT(10) +#define BMI323_IO_INT2_LVL_OD_OP_MSK GENMASK(10, 8) +#define BMI323_IO_INT_CONF_REG 0x39 +#define BMI323_IO_INT_LTCH_MSK BIT(0) +#define BMI323_INT_MAP1_REG 0x3A +#define BMI323_INT_MAP2_REG 0x3B +#define BMI323_NOMOTION_MSK GENMASK(1, 0) +#define BMI323_MOTION_MSK GENMASK(3, 2) +#define BMI323_STEP_CNT_MSK GENMASK(11, 10) +#define BMI323_TAP_MSK GENMASK(1, 0) +#define BMI323_TMP_DRDY_MSK GENMASK(7, 6) +#define BMI323_GYR_DRDY_MSK GENMASK(9, 8) +#define BMI323_ACC_DRDY_MSK GENMASK(11, 10) +#define BMI323_FIFO_WTRMRK_MSK GENMASK(13, 12) +#define BMI323_FIFO_FULL_MSK GENMASK(15, 14) + +/* Feature registers */ +#define BMI323_FEAT_CTRL_REG 0x40 +#define BMI323_FEAT_ENG_EN_MSK BIT(0) +#define BMI323_FEAT_DATA_ADDR 0x41 +#define BMI323_FEAT_DATA_TX 0x42 +#define BMI323_FEAT_DATA_STATUS 0x43 +#define BMI323_FEAT_DATA_TX_RDY_MSK BIT(1) +#define BMI323_FEAT_EVNT_EXT_REG 0x47 +#define BMI323_FEAT_EVNT_EXT_S_MSK BIT(3) +#define BMI323_FEAT_EVNT_EXT_D_MSK BIT(4) + +#define BMI323_CMD_REG 0x7E +#define BMI323_RST_VAL 0xDEAF +#define BMI323_CFG_RES_REG 0x7F + +/* Extended registers */ +#define BMI323_GEN_SET1_REG 0x02 +#define BMI323_GEN_SET1_MODE_MSK BIT(0) +#define BMI323_GEN_HOLD_DUR_MSK GENMASK(4, 1) + +/* Any Motion/No Motion config registers */ +#define BMI323_ANYMO1_REG 0x05 +#define BMI323_NOMO1_REG 0x08 +#define BMI323_MO2_OFFSET 0x01 +#define BMI323_MO3_OFFSET 0x02 +#define BMI323_MO1_REF_UP_MSK BIT(12) +#define BMI323_MO1_SLOPE_TH_MSK GENMASK(11, 0) +#define BMI323_MO2_HYSTR_MSK GENMASK(9, 0) +#define BMI323_MO3_DURA_MSK GENMASK(12, 0) + +/* Step counter config registers */ +#define BMI323_STEP_SC1_REG 0x10 +#define BMI323_STEP_SC1_WTRMRK_MSK GENMASK(9, 0) +#define BMI323_STEP_SC1_RST_CNT_MSK BIT(10) +#define BMI323_STEP_SC1_REG 0x10 +#define BMI323_STEP_LEN 2 + +/* Tap gesture config registers */ +#define BMI323_TAP1_REG 0x1E +#define BMI323_TAP1_AXIS_SEL_MSK GENMASK(1, 0) +#define BMI323_AXIS_XYZ_MSK GENMASK(1, 0) +#define BMI323_TAP1_TIMOUT_MSK BIT(2) +#define BMI323_TAP1_MAX_PEAKS_MSK GENMASK(5, 3) +#define BMI323_TAP1_MODE_MSK GENMASK(7, 6) +#define BMI323_TAP2_REG 0x1F +#define BMI323_TAP2_THRES_MSK GENMASK(9, 0) +#define BMI323_TAP2_MAX_DUR_MSK GENMASK(15, 10) +#define BMI323_TAP3_REG 0x20 +#define BMI323_TAP3_QUIET_TIM_MSK GENMASK(15, 12) +#define BMI323_TAP3_QT_BW_TAP_MSK GENMASK(11, 8) +#define BMI323_TAP3_QT_AFT_GES_MSK GENMASK(15, 12) + +#define BMI323_MOTION_THRES_SCALE 512 +#define BMI323_MOTION_HYSTR_SCALE 512 +#define BMI323_MOTION_DURAT_SCALE 50 +#define BMI323_TAP_THRES_SCALE 512 +#define BMI323_DUR_BW_TAP_SCALE 200 +#define BMI323_QUITE_TIM_GES_SCALE 25 +#define BMI323_MAX_GES_DUR_SCALE 25 + +/* + * The formula to calculate temperature in C. + * See datasheet section 6.1.1, Register Map Overview + * + * T_C = (temp_raw / 512) + 23 + */ +#define BMI323_TEMP_OFFSET 11776 +#define BMI323_TEMP_SCALE 1953125 + +/* + * The BMI323 features a FIFO with a capacity of 2048 bytes. Each frame + * consists of accelerometer (X, Y, Z) data and gyroscope (X, Y, Z) data, + * totaling 6 words or 12 bytes. The FIFO buffer can hold a total of + * 170 frames. + * + * If a watermark interrupt is configured for 170 frames, the interrupt will + * trigger when the FIFO reaches 169 frames, so limit the maximum watermark + * level to 169 frames. In terms of data, 169 frames would equal 1014 bytes, + * which is approximately 2 frames before the FIFO reaches its full capacity. + * See datasheet section 5.7.3 FIFO Buffer Interrupts + */ +#define BMI323_BYTES_PER_SAMPLE 2 +#define BMI323_FIFO_LENGTH_IN_BYTES 2048 +#define BMI323_FIFO_FRAME_LENGTH 6 +#define BMI323_FIFO_FULL_IN_FRAMES \ + ((BMI323_FIFO_LENGTH_IN_BYTES / \ + (BMI323_BYTES_PER_SAMPLE * BMI323_FIFO_FRAME_LENGTH)) - 1) +#define BMI323_FIFO_FULL_IN_WORDS \ + (BMI323_FIFO_FULL_IN_FRAMES * BMI323_FIFO_FRAME_LENGTH) + +#define BMI323_INT_MICRO_TO_RAW(val, val2, scale) ((val) * (scale) + \ + ((val2) * (scale)) / MEGA) + +#define BMI323_RAW_TO_MICRO(raw, scale) ((((raw) % (scale)) * MEGA) / scale) + +struct device; +int bmi323_core_probe(struct device *dev); +extern const struct regmap_config bmi323_regmap_config; + +#endif diff --git a/drivers/iio/imu/bmi323/bmi323_core.c b/drivers/iio/imu/bmi323/bmi323_core.c new file mode 100644 index 0000000000..183af48282 --- /dev/null +++ b/drivers/iio/imu/bmi323/bmi323_core.c @@ -0,0 +1,2139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IIO core driver for Bosch BMI323 6-Axis IMU. + * + * Copyright (C) 2023, Jagath Jog J + * + * Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi323-ds000.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "bmi323.h" + +enum bmi323_sensor_type { + BMI323_ACCEL, + BMI323_GYRO, + BMI323_SENSORS_CNT, +}; + +enum bmi323_opr_mode { + ACC_GYRO_MODE_DISABLE = 0x00, + GYRO_DRIVE_MODE_ENABLED = 0x01, + ACC_GYRO_MODE_DUTYCYCLE = 0x03, + ACC_GYRO_MODE_CONTINOUS = 0x04, + ACC_GYRO_MODE_HIGH_PERF = 0x07, +}; + +enum bmi323_state { + BMI323_IDLE, + BMI323_BUFFER_DRDY_TRIGGERED, + BMI323_BUFFER_FIFO, +}; + +enum bmi323_irq_pin { + BMI323_IRQ_DISABLED, + BMI323_IRQ_INT1, + BMI323_IRQ_INT2, +}; + +enum bmi323_3db_bw { + BMI323_BW_ODR_BY_2, + BMI323_BW_ODR_BY_4, +}; + +enum bmi323_scan { + BMI323_ACCEL_X, + BMI323_ACCEL_Y, + BMI323_ACCEL_Z, + BMI323_GYRO_X, + BMI323_GYRO_Y, + BMI323_GYRO_Z, + BMI323_CHAN_MAX +}; + +struct bmi323_hw { + u8 data; + u8 config; + const int (*scale_table)[2]; + int scale_table_len; +}; + +/* + * The accelerometer supports +-2G/4G/8G/16G ranges, and the resolution of + * each sample is 16 bits, signed. + * At +-8G the scale can calculated by + * ((8 + 8) * 9.80665 / (2^16 - 1)) * 10^6 = 2394.23819 scale in micro + * + */ +static const int bmi323_accel_scale[][2] = { + { 0, 598 }, + { 0, 1197 }, + { 0, 2394 }, + { 0, 4788 }, +}; + +static const int bmi323_gyro_scale[][2] = { + { 0, 66 }, + { 0, 133 }, + { 0, 266 }, + { 0, 532 }, + { 0, 1065 }, +}; + +static const int bmi323_accel_gyro_avrg[] = {0, 2, 4, 8, 16, 32, 64}; + +static const struct bmi323_hw bmi323_hw[2] = { + [BMI323_ACCEL] = { + .data = BMI323_ACCEL_X_REG, + .config = BMI323_ACC_CONF_REG, + .scale_table = bmi323_accel_scale, + .scale_table_len = ARRAY_SIZE(bmi323_accel_scale), + }, + [BMI323_GYRO] = { + .data = BMI323_GYRO_X_REG, + .config = BMI323_GYRO_CONF_REG, + .scale_table = bmi323_gyro_scale, + .scale_table_len = ARRAY_SIZE(bmi323_gyro_scale), + }, +}; + +struct bmi323_data { + struct device *dev; + struct regmap *regmap; + struct iio_mount_matrix orientation; + enum bmi323_irq_pin irq_pin; + struct iio_trigger *trig; + bool drdy_trigger_enabled; + enum bmi323_state state; + s64 fifo_tstamp, old_fifo_tstamp; + u32 odrns[BMI323_SENSORS_CNT]; + u32 odrhz[BMI323_SENSORS_CNT]; + unsigned int feature_events; + + /* + * Lock to protect the members of device's private data from concurrent + * access and also to serialize the access of extended registers. + * See bmi323_write_ext_reg(..) for more info. + */ + struct mutex mutex; + int watermark; + __le16 fifo_buff[BMI323_FIFO_FULL_IN_WORDS] __aligned(IIO_DMA_MINALIGN); + struct { + __le16 channels[BMI323_CHAN_MAX]; + s64 ts __aligned(8); + } buffer; + __le16 steps_count[BMI323_STEP_LEN]; +}; + +static const struct iio_mount_matrix * +bmi323_get_mount_matrix(const struct iio_dev *idev, + const struct iio_chan_spec *chan) +{ + struct bmi323_data *data = iio_priv(idev); + + return &data->orientation; +} + +static const struct iio_chan_spec_ext_info bmi323_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, bmi323_get_mount_matrix), + { } +}; + +static const struct iio_event_spec bmi323_step_wtrmrk_event = { + .type = IIO_EV_TYPE_CHANGE, + .dir = IIO_EV_DIR_NONE, + .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_VALUE), +}; + +static const struct iio_event_spec bmi323_accel_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HYSTERESIS) | + BIT(IIO_EV_INFO_ENABLE), + }, + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HYSTERESIS) | + BIT(IIO_EV_INFO_ENABLE), + }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_SINGLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT), + }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_DOUBLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT) | + BIT(IIO_EV_INFO_TAP2_MIN_DELAY), + }, +}; + +#define BMI323_ACCEL_CHANNEL(_type, _axis, _index) { \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ + .ext_info = bmi323_ext_info, \ + .event_spec = bmi323_accel_event, \ + .num_event_specs = ARRAY_SIZE(bmi323_accel_event), \ +} + +#define BMI323_GYRO_CHANNEL(_type, _axis, _index) { \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ + .ext_info = bmi323_ext_info, \ +} + +static const struct iio_chan_spec bmi323_channels[] = { + BMI323_ACCEL_CHANNEL(IIO_ACCEL, X, BMI323_ACCEL_X), + BMI323_ACCEL_CHANNEL(IIO_ACCEL, Y, BMI323_ACCEL_Y), + BMI323_ACCEL_CHANNEL(IIO_ACCEL, Z, BMI323_ACCEL_Z), + BMI323_GYRO_CHANNEL(IIO_ANGL_VEL, X, BMI323_GYRO_X), + BMI323_GYRO_CHANNEL(IIO_ANGL_VEL, Y, BMI323_GYRO_Y), + BMI323_GYRO_CHANNEL(IIO_ANGL_VEL, Z, BMI323_GYRO_Z), + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = -1, + }, + { + .type = IIO_STEPS, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_ENABLE), + .scan_index = -1, + .event_spec = &bmi323_step_wtrmrk_event, + .num_event_specs = 1, + + }, + IIO_CHAN_SOFT_TIMESTAMP(BMI323_CHAN_MAX), +}; + +static const int bmi323_acc_gyro_odr[][2] = { + { 0, 781250 }, + { 1, 562500 }, + { 3, 125000 }, + { 6, 250000 }, + { 12, 500000 }, + { 25, 0 }, + { 50, 0 }, + { 100, 0 }, + { 200, 0 }, + { 400, 0 }, + { 800, 0 }, +}; + +static const int bmi323_acc_gyro_odrns[] = { + 1280 * MEGA, + 640 * MEGA, + 320 * MEGA, + 160 * MEGA, + 80 * MEGA, + 40 * MEGA, + 20 * MEGA, + 10 * MEGA, + 5 * MEGA, + 2500 * KILO, + 1250 * KILO, +}; + +static enum bmi323_sensor_type bmi323_iio_to_sensor(enum iio_chan_type iio_type) +{ + switch (iio_type) { + case IIO_ACCEL: + return BMI323_ACCEL; + case IIO_ANGL_VEL: + return BMI323_GYRO; + default: + return -EINVAL; + } +} + +static int bmi323_set_mode(struct bmi323_data *data, + enum bmi323_sensor_type sensor, + enum bmi323_opr_mode mode) +{ + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, bmi323_hw[sensor].config, + BMI323_ACC_GYRO_CONF_MODE_MSK, + FIELD_PREP(BMI323_ACC_GYRO_CONF_MODE_MSK, + mode)); +} + +/* + * When writing data to extended register there must be no communication to + * any other register before write transaction is complete. + * See datasheet section 6.2 Extended Register Map Description. + */ +static int bmi323_write_ext_reg(struct bmi323_data *data, unsigned int ext_addr, + unsigned int ext_data) +{ + int ret, feature_status; + + ret = regmap_read(data->regmap, BMI323_FEAT_DATA_STATUS, + &feature_status); + if (ret) + return ret; + + if (!FIELD_GET(BMI323_FEAT_DATA_TX_RDY_MSK, feature_status)) + return -EBUSY; + + ret = regmap_write(data->regmap, BMI323_FEAT_DATA_ADDR, ext_addr); + if (ret) + return ret; + + return regmap_write(data->regmap, BMI323_FEAT_DATA_TX, ext_data); +} + +/* + * When reading data from extended register there must be no communication to + * any other register before read transaction is complete. + * See datasheet section 6.2 Extended Register Map Description. + */ +static int bmi323_read_ext_reg(struct bmi323_data *data, unsigned int ext_addr, + unsigned int *ext_data) +{ + int ret, feature_status; + + ret = regmap_read(data->regmap, BMI323_FEAT_DATA_STATUS, + &feature_status); + if (ret) + return ret; + + if (!FIELD_GET(BMI323_FEAT_DATA_TX_RDY_MSK, feature_status)) + return -EBUSY; + + ret = regmap_write(data->regmap, BMI323_FEAT_DATA_ADDR, ext_addr); + if (ret) + return ret; + + return regmap_read(data->regmap, BMI323_FEAT_DATA_TX, ext_data); +} + +static int bmi323_update_ext_reg(struct bmi323_data *data, + unsigned int ext_addr, + unsigned int mask, unsigned int ext_data) +{ + unsigned int value; + int ret; + + ret = bmi323_read_ext_reg(data, ext_addr, &value); + if (ret) + return ret; + + set_mask_bits(&value, mask, ext_data); + + return bmi323_write_ext_reg(data, ext_addr, value); +} + +static int bmi323_get_error_status(struct bmi323_data *data) +{ + int error, ret; + + guard(mutex)(&data->mutex); + ret = regmap_read(data->regmap, BMI323_ERR_REG, &error); + if (ret) + return ret; + + if (error) + dev_err(data->dev, "Sensor error 0x%x\n", error); + + return error; +} + +static int bmi323_feature_engine_events(struct bmi323_data *data, + const unsigned int event_mask, + bool state) +{ + unsigned int value; + int ret; + + ret = regmap_read(data->regmap, BMI323_FEAT_IO0_REG, &value); + if (ret) + return ret; + + /* Register must be cleared before changing an active config */ + ret = regmap_write(data->regmap, BMI323_FEAT_IO0_REG, 0); + if (ret) + return ret; + + if (state) + value |= event_mask; + else + value &= ~event_mask; + + ret = regmap_write(data->regmap, BMI323_FEAT_IO0_REG, value); + if (ret) + return ret; + + return regmap_write(data->regmap, BMI323_FEAT_IO_STATUS_REG, + BMI323_FEAT_IO_STATUS_MSK); +} + +static int bmi323_step_wtrmrk_en(struct bmi323_data *data, int state) +{ + enum bmi323_irq_pin step_irq; + int ret; + + guard(mutex)(&data->mutex); + if (!FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, data->feature_events)) + return -EINVAL; + + if (state) + step_irq = data->irq_pin; + else + step_irq = BMI323_IRQ_DISABLED; + + ret = bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG, + BMI323_STEP_SC1_WTRMRK_MSK, + FIELD_PREP(BMI323_STEP_SC1_WTRMRK_MSK, + state ? 1 : 0)); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, BMI323_INT_MAP1_REG, + BMI323_STEP_CNT_MSK, + FIELD_PREP(BMI323_STEP_CNT_MSK, step_irq)); +} + +static int bmi323_motion_config_reg(enum iio_event_direction dir) +{ + switch (dir) { + case IIO_EV_DIR_RISING: + return BMI323_ANYMO1_REG; + case IIO_EV_DIR_FALLING: + return BMI323_NOMO1_REG; + default: + return -EINVAL; + } +} + +static int bmi323_motion_event_en(struct bmi323_data *data, + enum iio_event_direction dir, int state) +{ + unsigned int state_value = state ? BMI323_FEAT_XYZ_MSK : 0; + int config, ret, msk, raw, field_value; + enum bmi323_irq_pin motion_irq; + int irq_msk, irq_field_val; + + if (state) + motion_irq = data->irq_pin; + else + motion_irq = BMI323_IRQ_DISABLED; + + switch (dir) { + case IIO_EV_DIR_RISING: + msk = BMI323_FEAT_IO0_XYZ_MOTION_MSK; + raw = 512; + config = BMI323_ANYMO1_REG; + irq_msk = BMI323_MOTION_MSK; + irq_field_val = FIELD_PREP(BMI323_MOTION_MSK, motion_irq); + field_value = FIELD_PREP(BMI323_FEAT_IO0_XYZ_MOTION_MSK, + state_value); + break; + case IIO_EV_DIR_FALLING: + msk = BMI323_FEAT_IO0_XYZ_NOMOTION_MSK; + raw = 0; + config = BMI323_NOMO1_REG; + irq_msk = BMI323_NOMOTION_MSK; + irq_field_val = FIELD_PREP(BMI323_NOMOTION_MSK, motion_irq); + field_value = FIELD_PREP(BMI323_FEAT_IO0_XYZ_NOMOTION_MSK, + state_value); + break; + default: + return -EINVAL; + } + + guard(mutex)(&data->mutex); + ret = bmi323_feature_engine_events(data, msk, state); + if (ret) + return ret; + + ret = bmi323_update_ext_reg(data, config, + BMI323_MO1_REF_UP_MSK, + FIELD_PREP(BMI323_MO1_REF_UP_MSK, 0)); + if (ret) + return ret; + + /* Set initial value to avoid interrupts while enabling*/ + ret = bmi323_update_ext_reg(data, config, + BMI323_MO1_SLOPE_TH_MSK, + FIELD_PREP(BMI323_MO1_SLOPE_TH_MSK, raw)); + if (ret) + return ret; + + ret = regmap_update_bits(data->regmap, BMI323_INT_MAP1_REG, irq_msk, + irq_field_val); + if (ret) + return ret; + + set_mask_bits(&data->feature_events, msk, field_value); + + return 0; +} + +static int bmi323_tap_event_en(struct bmi323_data *data, + enum iio_event_direction dir, int state) +{ + enum bmi323_irq_pin tap_irq; + int ret, tap_enabled; + + guard(mutex)(&data->mutex); + + if (data->odrhz[BMI323_ACCEL] < 200) { + dev_err(data->dev, "Invalid accelerometer parameter\n"); + return -EINVAL; + } + + switch (dir) { + case IIO_EV_DIR_SINGLETAP: + ret = bmi323_feature_engine_events(data, + BMI323_FEAT_IO0_S_TAP_MSK, + state); + if (ret) + return ret; + + set_mask_bits(&data->feature_events, BMI323_FEAT_IO0_S_TAP_MSK, + FIELD_PREP(BMI323_FEAT_IO0_S_TAP_MSK, state)); + break; + case IIO_EV_DIR_DOUBLETAP: + ret = bmi323_feature_engine_events(data, + BMI323_FEAT_IO0_D_TAP_MSK, + state); + if (ret) + return ret; + + set_mask_bits(&data->feature_events, BMI323_FEAT_IO0_D_TAP_MSK, + FIELD_PREP(BMI323_FEAT_IO0_D_TAP_MSK, state)); + break; + default: + return -EINVAL; + } + + tap_enabled = FIELD_GET(BMI323_FEAT_IO0_S_TAP_MSK | + BMI323_FEAT_IO0_D_TAP_MSK, + data->feature_events); + + if (tap_enabled) + tap_irq = data->irq_pin; + else + tap_irq = BMI323_IRQ_DISABLED; + + ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG, + BMI323_TAP_MSK, + FIELD_PREP(BMI323_TAP_MSK, tap_irq)); + if (ret) + return ret; + + if (!state) + return 0; + + ret = bmi323_update_ext_reg(data, BMI323_TAP1_REG, + BMI323_TAP1_MAX_PEAKS_MSK, + FIELD_PREP(BMI323_TAP1_MAX_PEAKS_MSK, + 0x04)); + if (ret) + return ret; + + ret = bmi323_update_ext_reg(data, BMI323_TAP1_REG, + BMI323_TAP1_AXIS_SEL_MSK, + FIELD_PREP(BMI323_TAP1_AXIS_SEL_MSK, + BMI323_AXIS_XYZ_MSK)); + if (ret) + return ret; + + return bmi323_update_ext_reg(data, BMI323_TAP1_REG, + BMI323_TAP1_TIMOUT_MSK, + FIELD_PREP(BMI323_TAP1_TIMOUT_MSK, + 0)); +} + +static ssize_t in_accel_gesture_tap_wait_dur_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmi323_data *data = iio_priv(indio_dev); + unsigned int reg_value, raw; + int ret, val[2]; + + scoped_guard(mutex, &data->mutex) { + ret = bmi323_read_ext_reg(data, BMI323_TAP2_REG, ®_value); + if (ret) + return ret; + } + + raw = FIELD_GET(BMI323_TAP2_MAX_DUR_MSK, reg_value); + val[0] = raw / BMI323_MAX_GES_DUR_SCALE; + val[1] = BMI323_RAW_TO_MICRO(raw, BMI323_MAX_GES_DUR_SCALE); + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, ARRAY_SIZE(val), + val); +} + +static ssize_t in_accel_gesture_tap_wait_dur_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmi323_data *data = iio_priv(indio_dev); + int ret, val_int, val_fract, raw; + + ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract); + if (ret) + return ret; + + raw = BMI323_INT_MICRO_TO_RAW(val_int, val_fract, + BMI323_MAX_GES_DUR_SCALE); + if (!in_range(raw, 0, 64)) + return -EINVAL; + + guard(mutex)(&data->mutex); + ret = bmi323_update_ext_reg(data, BMI323_TAP2_REG, + BMI323_TAP2_MAX_DUR_MSK, + FIELD_PREP(BMI323_TAP2_MAX_DUR_MSK, raw)); + if (ret) + return ret; + + return len; +} + +/* + * Maximum duration from first tap within the second tap is expected to happen. + * This timeout is applicable only if gesture_tap_wait_timeout is enabled. + */ +static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_wait_dur, 0); + +static ssize_t in_accel_gesture_tap_wait_timeout_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmi323_data *data = iio_priv(indio_dev); + unsigned int reg_value, raw; + int ret; + + scoped_guard(mutex, &data->mutex) { + ret = bmi323_read_ext_reg(data, BMI323_TAP1_REG, ®_value); + if (ret) + return ret; + } + + raw = FIELD_GET(BMI323_TAP1_TIMOUT_MSK, reg_value); + + return iio_format_value(buf, IIO_VAL_INT, 1, &raw); +} + +static ssize_t in_accel_gesture_tap_wait_timeout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmi323_data *data = iio_priv(indio_dev); + bool val; + int ret; + + ret = kstrtobool(buf, &val); + if (ret) + return ret; + + guard(mutex)(&data->mutex); + ret = bmi323_update_ext_reg(data, BMI323_TAP1_REG, + BMI323_TAP1_TIMOUT_MSK, + FIELD_PREP(BMI323_TAP1_TIMOUT_MSK, val)); + if (ret) + return ret; + + return len; +} + +/* Enable/disable gesture confirmation with wait time */ +static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_wait_timeout, 0); + +static IIO_CONST_ATTR(in_accel_gesture_tap_wait_dur_available, + "[0.0 0.04 2.52]"); + +static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available, + "[0.005 0.005 0.075]"); + +static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available, + "[0.04 0.04 0.6]"); + +static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "[0.0 0.002 1.99]"); + +static IIO_CONST_ATTR(in_accel_mag_value_available, "[0.0 0.002 7.99]"); + +static IIO_CONST_ATTR(in_accel_mag_period_available, "[0.0 0.02 162.0]"); + +static IIO_CONST_ATTR(in_accel_mag_hysteresis_available, "[0.0 0.002 1.99]"); + +static struct attribute *bmi323_event_attributes[] = { + &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_wait_dur_available.dev_attr.attr, + &iio_dev_attr_in_accel_gesture_tap_wait_timeout.dev_attr.attr, + &iio_dev_attr_in_accel_gesture_tap_wait_dur.dev_attr.attr, + &iio_const_attr_in_accel_mag_value_available.dev_attr.attr, + &iio_const_attr_in_accel_mag_period_available.dev_attr.attr, + &iio_const_attr_in_accel_mag_hysteresis_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group bmi323_event_attribute_group = { + .attrs = bmi323_event_attributes, +}; + +static int bmi323_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, int state) +{ + struct bmi323_data *data = iio_priv(indio_dev); + + switch (type) { + case IIO_EV_TYPE_MAG: + return bmi323_motion_event_en(data, dir, state); + case IIO_EV_TYPE_GESTURE: + return bmi323_tap_event_en(data, dir, state); + case IIO_EV_TYPE_CHANGE: + return bmi323_step_wtrmrk_en(data, state); + default: + return -EINVAL; + } +} + +static int bmi323_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct bmi323_data *data = iio_priv(indio_dev); + int ret, value, reg_val; + + guard(mutex)(&data->mutex); + + switch (chan->type) { + case IIO_ACCEL: + switch (dir) { + case IIO_EV_DIR_SINGLETAP: + ret = FIELD_GET(BMI323_FEAT_IO0_S_TAP_MSK, + data->feature_events); + break; + case IIO_EV_DIR_DOUBLETAP: + ret = FIELD_GET(BMI323_FEAT_IO0_D_TAP_MSK, + data->feature_events); + break; + case IIO_EV_DIR_RISING: + value = FIELD_GET(BMI323_FEAT_IO0_XYZ_MOTION_MSK, + data->feature_events); + ret = value ? 1 : 0; + break; + case IIO_EV_DIR_FALLING: + value = FIELD_GET(BMI323_FEAT_IO0_XYZ_NOMOTION_MSK, + data->feature_events); + ret = value ? 1 : 0; + break; + default: + ret = -EINVAL; + break; + } + return ret; + case IIO_STEPS: + ret = regmap_read(data->regmap, BMI323_INT_MAP1_REG, ®_val); + if (ret) + return ret; + + return FIELD_GET(BMI323_STEP_CNT_MSK, reg_val) ? 1 : 0; + default: + return -EINVAL; + } +} + +static int bmi323_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct bmi323_data *data = iio_priv(indio_dev); + unsigned int raw; + int reg; + + guard(mutex)(&data->mutex); + + switch (type) { + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + if (!in_range(val, 0, 2)) + return -EINVAL; + + raw = BMI323_INT_MICRO_TO_RAW(val, val2, + BMI323_TAP_THRES_SCALE); + + return bmi323_update_ext_reg(data, BMI323_TAP2_REG, + BMI323_TAP2_THRES_MSK, + FIELD_PREP(BMI323_TAP2_THRES_MSK, + raw)); + case IIO_EV_INFO_RESET_TIMEOUT: + if (val || !in_range(val2, 40000, 560001)) + return -EINVAL; + + raw = BMI323_INT_MICRO_TO_RAW(val, val2, + BMI323_QUITE_TIM_GES_SCALE); + + return bmi323_update_ext_reg(data, BMI323_TAP3_REG, + BMI323_TAP3_QT_AFT_GES_MSK, + FIELD_PREP(BMI323_TAP3_QT_AFT_GES_MSK, + raw)); + case IIO_EV_INFO_TAP2_MIN_DELAY: + if (val || !in_range(val2, 5000, 70001)) + return -EINVAL; + + raw = BMI323_INT_MICRO_TO_RAW(val, val2, + BMI323_DUR_BW_TAP_SCALE); + + return bmi323_update_ext_reg(data, BMI323_TAP3_REG, + BMI323_TAP3_QT_BW_TAP_MSK, + FIELD_PREP(BMI323_TAP3_QT_BW_TAP_MSK, + raw)); + default: + return -EINVAL; + } + case IIO_EV_TYPE_MAG: + reg = bmi323_motion_config_reg(dir); + if (reg < 0) + return -EINVAL; + + switch (info) { + case IIO_EV_INFO_VALUE: + if (!in_range(val, 0, 8)) + return -EINVAL; + + raw = BMI323_INT_MICRO_TO_RAW(val, val2, + BMI323_MOTION_THRES_SCALE); + + return bmi323_update_ext_reg(data, reg, + BMI323_MO1_SLOPE_TH_MSK, + FIELD_PREP(BMI323_MO1_SLOPE_TH_MSK, + raw)); + case IIO_EV_INFO_PERIOD: + if (!in_range(val, 0, 163)) + return -EINVAL; + + raw = BMI323_INT_MICRO_TO_RAW(val, val2, + BMI323_MOTION_DURAT_SCALE); + + return bmi323_update_ext_reg(data, + reg + BMI323_MO3_OFFSET, + BMI323_MO3_DURA_MSK, + FIELD_PREP(BMI323_MO3_DURA_MSK, + raw)); + case IIO_EV_INFO_HYSTERESIS: + if (!in_range(val, 0, 2)) + return -EINVAL; + + raw = BMI323_INT_MICRO_TO_RAW(val, val2, + BMI323_MOTION_HYSTR_SCALE); + + return bmi323_update_ext_reg(data, + reg + BMI323_MO2_OFFSET, + BMI323_MO2_HYSTR_MSK, + FIELD_PREP(BMI323_MO2_HYSTR_MSK, + raw)); + default: + return -EINVAL; + } + case IIO_EV_TYPE_CHANGE: + if (!in_range(val, 0, 20461)) + return -EINVAL; + + raw = val / 20; + return bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG, + BMI323_STEP_SC1_WTRMRK_MSK, + FIELD_PREP(BMI323_STEP_SC1_WTRMRK_MSK, + raw)); + default: + return -EINVAL; + } +} + +static int bmi323_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct bmi323_data *data = iio_priv(indio_dev); + unsigned int raw, reg_value; + int ret, reg; + + guard(mutex)(&data->mutex); + + switch (type) { + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + ret = bmi323_read_ext_reg(data, BMI323_TAP2_REG, + ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_TAP2_THRES_MSK, reg_value); + *val = raw / BMI323_TAP_THRES_SCALE; + *val2 = BMI323_RAW_TO_MICRO(raw, BMI323_TAP_THRES_SCALE); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_RESET_TIMEOUT: + ret = bmi323_read_ext_reg(data, BMI323_TAP3_REG, + ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_TAP3_QT_AFT_GES_MSK, reg_value); + *val = 0; + *val2 = BMI323_RAW_TO_MICRO(raw, + BMI323_QUITE_TIM_GES_SCALE); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_TAP2_MIN_DELAY: + ret = bmi323_read_ext_reg(data, BMI323_TAP3_REG, + ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_TAP3_QT_BW_TAP_MSK, reg_value); + *val = 0; + *val2 = BMI323_RAW_TO_MICRO(raw, + BMI323_DUR_BW_TAP_SCALE); + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_EV_TYPE_MAG: + reg = bmi323_motion_config_reg(dir); + if (reg < 0) + return -EINVAL; + + switch (info) { + case IIO_EV_INFO_VALUE: + ret = bmi323_read_ext_reg(data, reg, ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_MO1_SLOPE_TH_MSK, reg_value); + *val = raw / BMI323_MOTION_THRES_SCALE; + *val2 = BMI323_RAW_TO_MICRO(raw, + BMI323_MOTION_THRES_SCALE); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_PERIOD: + ret = bmi323_read_ext_reg(data, + reg + BMI323_MO3_OFFSET, + ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_MO3_DURA_MSK, reg_value); + *val = raw / BMI323_MOTION_DURAT_SCALE; + *val2 = BMI323_RAW_TO_MICRO(raw, + BMI323_MOTION_DURAT_SCALE); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_HYSTERESIS: + ret = bmi323_read_ext_reg(data, + reg + BMI323_MO2_OFFSET, + ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_MO2_HYSTR_MSK, reg_value); + *val = raw / BMI323_MOTION_HYSTR_SCALE; + *val2 = BMI323_RAW_TO_MICRO(raw, + BMI323_MOTION_HYSTR_SCALE); + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_EV_TYPE_CHANGE: + ret = bmi323_read_ext_reg(data, BMI323_STEP_SC1_REG, + ®_value); + if (ret) + return ret; + + raw = FIELD_GET(BMI323_STEP_SC1_WTRMRK_MSK, reg_value); + *val = raw * 20; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int __bmi323_fifo_flush(struct iio_dev *indio_dev) +{ + struct bmi323_data *data = iio_priv(indio_dev); + int i, ret, fifo_lvl, frame_count, bit, index; + __le16 *frame, *pchannels; + u64 sample_period; + s64 tstamp; + + guard(mutex)(&data->mutex); + ret = regmap_read(data->regmap, BMI323_FIFO_FILL_LEVEL_REG, &fifo_lvl); + if (ret) + return ret; + + fifo_lvl = min(fifo_lvl, BMI323_FIFO_FULL_IN_WORDS); + + frame_count = fifo_lvl / BMI323_FIFO_FRAME_LENGTH; + if (!frame_count) + return -EINVAL; + + if (fifo_lvl % BMI323_FIFO_FRAME_LENGTH) + dev_warn(data->dev, "Bad FIFO alignment\n"); + + /* + * Approximate timestamps for each of the sample based on the sampling + * frequency, timestamp for last sample and number of samples. + */ + if (data->old_fifo_tstamp) { + sample_period = data->fifo_tstamp - data->old_fifo_tstamp; + do_div(sample_period, frame_count); + } else { + sample_period = data->odrns[BMI323_ACCEL]; + } + + tstamp = data->fifo_tstamp - (frame_count - 1) * sample_period; + + ret = regmap_noinc_read(data->regmap, BMI323_FIFO_DATA_REG, + &data->fifo_buff[0], + fifo_lvl * BMI323_BYTES_PER_SAMPLE); + if (ret) + return ret; + + for (i = 0; i < frame_count; i++) { + frame = &data->fifo_buff[i * BMI323_FIFO_FRAME_LENGTH]; + pchannels = &data->buffer.channels[0]; + + index = 0; + for_each_set_bit(bit, indio_dev->active_scan_mask, + BMI323_CHAN_MAX) + pchannels[index++] = frame[bit]; + + iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, + tstamp); + + tstamp += sample_period; + } + + return frame_count; +} + +static int bmi323_set_watermark(struct iio_dev *indio_dev, unsigned int val) +{ + struct bmi323_data *data = iio_priv(indio_dev); + + val = min(val, (u32)BMI323_FIFO_FULL_IN_FRAMES); + + guard(mutex)(&data->mutex); + data->watermark = val; + + return 0; +} + +static int bmi323_fifo_disable(struct bmi323_data *data) +{ + int ret; + + guard(mutex)(&data->mutex); + ret = regmap_write(data->regmap, BMI323_FIFO_CONF_REG, 0); + if (ret) + return ret; + + ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG, + BMI323_FIFO_WTRMRK_MSK, + FIELD_PREP(BMI323_FIFO_WTRMRK_MSK, 0)); + if (ret) + return ret; + + data->fifo_tstamp = 0; + data->state = BMI323_IDLE; + + return 0; +} + +static int bmi323_buffer_predisable(struct iio_dev *indio_dev) +{ + struct bmi323_data *data = iio_priv(indio_dev); + + if (iio_device_get_current_mode(indio_dev) == INDIO_BUFFER_TRIGGERED) + return 0; + + return bmi323_fifo_disable(data); +} + +static int bmi323_update_watermark(struct bmi323_data *data) +{ + int wtrmrk; + + wtrmrk = data->watermark * BMI323_FIFO_FRAME_LENGTH; + + return regmap_write(data->regmap, BMI323_FIFO_WTRMRK_REG, wtrmrk); +} + +static int bmi323_fifo_enable(struct bmi323_data *data) +{ + int ret; + + guard(mutex)(&data->mutex); + ret = regmap_update_bits(data->regmap, BMI323_FIFO_CONF_REG, + BMI323_FIFO_CONF_ACC_GYR_EN_MSK, + FIELD_PREP(BMI323_FIFO_CONF_ACC_GYR_EN_MSK, + BMI323_FIFO_ACC_GYR_MSK)); + if (ret) + return ret; + + ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG, + BMI323_FIFO_WTRMRK_MSK, + FIELD_PREP(BMI323_FIFO_WTRMRK_MSK, + data->irq_pin)); + if (ret) + return ret; + + ret = bmi323_update_watermark(data); + if (ret) + return ret; + + ret = regmap_write(data->regmap, BMI323_FIFO_CTRL_REG, + BMI323_FIFO_FLUSH_MSK); + if (ret) + return ret; + + data->state = BMI323_BUFFER_FIFO; + + return 0; +} + +static int bmi323_buffer_preenable(struct iio_dev *indio_dev) +{ + struct bmi323_data *data = iio_priv(indio_dev); + + guard(mutex)(&data->mutex); + /* + * When the ODR of the accelerometer and gyroscope do not match, the + * maximum ODR value between the accelerometer and gyroscope is used + * for FIFO and the signal with lower ODR will insert dummy frame. + * So allow buffer read only when ODR's of accelero and gyro are equal. + * See datasheet section 5.7 "FIFO Data Buffering". + */ + if (data->odrns[BMI323_ACCEL] != data->odrns[BMI323_GYRO]) { + dev_err(data->dev, "Accelero and Gyro ODR doesn't match\n"); + return -EINVAL; + } + + return 0; +} + +static int bmi323_buffer_postenable(struct iio_dev *indio_dev) +{ + struct bmi323_data *data = iio_priv(indio_dev); + + if (iio_device_get_current_mode(indio_dev) == INDIO_BUFFER_TRIGGERED) + return 0; + + return bmi323_fifo_enable(data); +} + +static ssize_t hwfifo_watermark_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmi323_data *data = iio_priv(indio_dev); + int wm; + + scoped_guard(mutex, &data->mutex) + wm = data->watermark; + + return sysfs_emit(buf, "%d\n", wm); +} +static IIO_DEVICE_ATTR_RO(hwfifo_watermark, 0); + +static ssize_t hwfifo_enabled_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmi323_data *data = iio_priv(indio_dev); + bool state; + + scoped_guard(mutex, &data->mutex) + state = data->state == BMI323_BUFFER_FIFO; + + return sysfs_emit(buf, "%d\n", state); +} +static IIO_DEVICE_ATTR_RO(hwfifo_enabled, 0); + +static const struct iio_dev_attr *bmi323_fifo_attributes[] = { + &iio_dev_attr_hwfifo_watermark, + &iio_dev_attr_hwfifo_enabled, + NULL +}; + +static const struct iio_buffer_setup_ops bmi323_buffer_ops = { + .preenable = bmi323_buffer_preenable, + .postenable = bmi323_buffer_postenable, + .predisable = bmi323_buffer_predisable, +}; + +static irqreturn_t bmi323_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmi323_data *data = iio_priv(indio_dev); + unsigned int status_addr, status, feature_event; + s64 timestamp = iio_get_time_ns(indio_dev); + int ret; + + if (data->irq_pin == BMI323_IRQ_INT1) + status_addr = BMI323_STATUS_INT1_REG; + else + status_addr = BMI323_STATUS_INT2_REG; + + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, status_addr, &status); + if (ret) + return IRQ_NONE; + } + + if (!status || FIELD_GET(BMI323_STATUS_ERROR_MSK, status)) + return IRQ_NONE; + + if (FIELD_GET(BMI323_STATUS_FIFO_WTRMRK_MSK, status)) { + data->old_fifo_tstamp = data->fifo_tstamp; + data->fifo_tstamp = iio_get_time_ns(indio_dev); + ret = __bmi323_fifo_flush(indio_dev); + if (ret < 0) + return IRQ_NONE; + } + + if (FIELD_GET(BMI323_STATUS_ACC_GYR_DRDY_MSK, status)) + iio_trigger_poll_nested(data->trig); + + if (FIELD_GET(BMI323_STATUS_MOTION_MSK, status)) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_RISING), + timestamp); + + if (FIELD_GET(BMI323_STATUS_NOMOTION_MSK, status)) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_FALLING), + timestamp); + + if (FIELD_GET(BMI323_STATUS_STP_WTR_MSK, status)) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_STEPS, 0, + IIO_NO_MOD, + IIO_EV_TYPE_CHANGE, + IIO_EV_DIR_NONE), + timestamp); + + if (FIELD_GET(BMI323_STATUS_TAP_MSK, status)) { + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, + BMI323_FEAT_EVNT_EXT_REG, + &feature_event); + if (ret) + return IRQ_NONE; + } + + if (FIELD_GET(BMI323_FEAT_EVNT_EXT_S_MSK, feature_event)) { + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_SINGLETAP), + timestamp); + } + + if (FIELD_GET(BMI323_FEAT_EVNT_EXT_D_MSK, feature_event)) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_DOUBLETAP), + timestamp); + } + + return IRQ_HANDLED; +} + +static int bmi323_set_drdy_irq(struct bmi323_data *data, + enum bmi323_irq_pin irq_pin) +{ + int ret; + + ret = regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG, + BMI323_GYR_DRDY_MSK, + FIELD_PREP(BMI323_GYR_DRDY_MSK, irq_pin)); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, BMI323_INT_MAP2_REG, + BMI323_ACC_DRDY_MSK, + FIELD_PREP(BMI323_ACC_DRDY_MSK, irq_pin)); +} + +static int bmi323_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bmi323_data *data = iio_trigger_get_drvdata(trig); + enum bmi323_irq_pin irq_pin; + + guard(mutex)(&data->mutex); + + if (data->state == BMI323_BUFFER_FIFO) { + dev_warn(data->dev, "Can't set trigger when FIFO enabled\n"); + return -EBUSY; + } + + if (state) { + data->state = BMI323_BUFFER_DRDY_TRIGGERED; + irq_pin = data->irq_pin; + } else { + data->state = BMI323_IDLE; + irq_pin = BMI323_IRQ_DISABLED; + } + + return bmi323_set_drdy_irq(data, irq_pin); +} + +static const struct iio_trigger_ops bmi323_trigger_ops = { + .set_trigger_state = &bmi323_data_rdy_trigger_set_state, +}; + +static irqreturn_t bmi323_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmi323_data *data = iio_priv(indio_dev); + int ret, bit, index = 0; + + /* Lock to protect the data->buffer */ + guard(mutex)(&data->mutex); + + if (*indio_dev->active_scan_mask == BMI323_ALL_CHAN_MSK) { + ret = regmap_bulk_read(data->regmap, BMI323_ACCEL_X_REG, + &data->buffer.channels, + ARRAY_SIZE(data->buffer.channels)); + if (ret) + return IRQ_NONE; + } else { + for_each_set_bit(bit, indio_dev->active_scan_mask, + BMI323_CHAN_MAX) { + ret = regmap_raw_read(data->regmap, + BMI323_ACCEL_X_REG + bit, + &data->buffer.channels[index++], + BMI323_BYTES_PER_SAMPLE); + if (ret) + return IRQ_NONE; + } + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, + iio_get_time_ns(indio_dev)); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int bmi323_set_average(struct bmi323_data *data, + enum bmi323_sensor_type sensor, int avg) +{ + int raw = ARRAY_SIZE(bmi323_accel_gyro_avrg); + + while (raw--) + if (avg == bmi323_accel_gyro_avrg[raw]) + break; + if (raw < 0) + return -EINVAL; + + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, bmi323_hw[sensor].config, + BMI323_ACC_GYRO_CONF_AVG_MSK, + FIELD_PREP(BMI323_ACC_GYRO_CONF_AVG_MSK, + raw)); +} + +static int bmi323_get_average(struct bmi323_data *data, + enum bmi323_sensor_type sensor, int *avg) +{ + int ret, value, raw; + + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, bmi323_hw[sensor].config, &value); + if (ret) + return ret; + } + + raw = FIELD_GET(BMI323_ACC_GYRO_CONF_AVG_MSK, value); + *avg = bmi323_accel_gyro_avrg[raw]; + + return IIO_VAL_INT; +} + +static int bmi323_enable_steps(struct bmi323_data *data, int val) +{ + int ret; + + guard(mutex)(&data->mutex); + if (data->odrhz[BMI323_ACCEL] < 200) { + dev_err(data->dev, "Invalid accelerometer parameter\n"); + return -EINVAL; + } + + ret = bmi323_feature_engine_events(data, BMI323_FEAT_IO0_STP_CNT_MSK, + val ? 1 : 0); + if (ret) + return ret; + + set_mask_bits(&data->feature_events, BMI323_FEAT_IO0_STP_CNT_MSK, + FIELD_PREP(BMI323_FEAT_IO0_STP_CNT_MSK, val ? 1 : 0)); + + return 0; +} + +static int bmi323_read_steps(struct bmi323_data *data, int *val) +{ + int ret; + + guard(mutex)(&data->mutex); + if (!FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, data->feature_events)) + return -EINVAL; + + ret = regmap_bulk_read(data->regmap, BMI323_FEAT_IO2_REG, + data->steps_count, + ARRAY_SIZE(data->steps_count)); + if (ret) + return ret; + + *val = get_unaligned_le32(data->steps_count); + + return IIO_VAL_INT; +} + +static int bmi323_read_axis(struct bmi323_data *data, + struct iio_chan_spec const *chan, int *val) +{ + enum bmi323_sensor_type sensor; + unsigned int value; + u8 addr; + int ret; + + ret = bmi323_get_error_status(data); + if (ret) + return -EINVAL; + + sensor = bmi323_iio_to_sensor(chan->type); + addr = bmi323_hw[sensor].data + (chan->channel2 - IIO_MOD_X); + + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, addr, &value); + if (ret) + return ret; + } + + *val = sign_extend32(value, chan->scan_type.realbits - 1); + + return IIO_VAL_INT; +} + +static int bmi323_get_temp_data(struct bmi323_data *data, int *val) +{ + unsigned int value; + int ret; + + ret = bmi323_get_error_status(data); + if (ret) + return -EINVAL; + + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, BMI323_TEMP_REG, &value); + if (ret) + return ret; + } + + *val = sign_extend32(value, 15); + + return IIO_VAL_INT; +} + +static int bmi323_get_odr(struct bmi323_data *data, + enum bmi323_sensor_type sensor, int *odr, int *uodr) +{ + int ret, value, odr_raw; + + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, bmi323_hw[sensor].config, &value); + if (ret) + return ret; + } + + odr_raw = FIELD_GET(BMI323_ACC_GYRO_CONF_ODR_MSK, value); + *odr = bmi323_acc_gyro_odr[odr_raw - 1][0]; + *uodr = bmi323_acc_gyro_odr[odr_raw - 1][1]; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int bmi323_configure_power_mode(struct bmi323_data *data, + enum bmi323_sensor_type sensor, + int odr_index) +{ + enum bmi323_opr_mode mode; + + if (bmi323_acc_gyro_odr[odr_index][0] > 25) + mode = ACC_GYRO_MODE_CONTINOUS; + else + mode = ACC_GYRO_MODE_DUTYCYCLE; + + return bmi323_set_mode(data, sensor, mode); +} + +static int bmi323_set_odr(struct bmi323_data *data, + enum bmi323_sensor_type sensor, int odr, int uodr) +{ + int odr_raw, ret; + + odr_raw = ARRAY_SIZE(bmi323_acc_gyro_odr); + + while (odr_raw--) + if (odr == bmi323_acc_gyro_odr[odr_raw][0] && + uodr == bmi323_acc_gyro_odr[odr_raw][1]) + break; + if (odr_raw < 0) + return -EINVAL; + + ret = bmi323_configure_power_mode(data, sensor, odr_raw); + if (ret) + return -EINVAL; + + guard(mutex)(&data->mutex); + data->odrhz[sensor] = bmi323_acc_gyro_odr[odr_raw][0]; + data->odrns[sensor] = bmi323_acc_gyro_odrns[odr_raw]; + + odr_raw++; + + return regmap_update_bits(data->regmap, bmi323_hw[sensor].config, + BMI323_ACC_GYRO_CONF_ODR_MSK, + FIELD_PREP(BMI323_ACC_GYRO_CONF_ODR_MSK, + odr_raw)); +} + +static int bmi323_get_scale(struct bmi323_data *data, + enum bmi323_sensor_type sensor, int *val2) +{ + int ret, value, scale_raw; + + scoped_guard(mutex, &data->mutex) { + ret = regmap_read(data->regmap, bmi323_hw[sensor].config, + &value); + if (ret) + return ret; + } + + scale_raw = FIELD_GET(BMI323_ACC_GYRO_CONF_SCL_MSK, value); + *val2 = bmi323_hw[sensor].scale_table[scale_raw][1]; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int bmi323_set_scale(struct bmi323_data *data, + enum bmi323_sensor_type sensor, int val, int val2) +{ + int scale_raw; + + scale_raw = bmi323_hw[sensor].scale_table_len; + + while (scale_raw--) + if (val == bmi323_hw[sensor].scale_table[scale_raw][0] && + val2 == bmi323_hw[sensor].scale_table[scale_raw][1]) + break; + if (scale_raw < 0) + return -EINVAL; + + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, bmi323_hw[sensor].config, + BMI323_ACC_GYRO_CONF_SCL_MSK, + FIELD_PREP(BMI323_ACC_GYRO_CONF_SCL_MSK, + scale_raw)); +} + +static int bmi323_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + enum bmi323_sensor_type sensor; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *type = IIO_VAL_INT_PLUS_MICRO; + *vals = (const int *)bmi323_acc_gyro_odr; + *length = ARRAY_SIZE(bmi323_acc_gyro_odr) * 2; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SCALE: + sensor = bmi323_iio_to_sensor(chan->type); + *type = IIO_VAL_INT_PLUS_MICRO; + *vals = (const int *)bmi323_hw[sensor].scale_table; + *length = bmi323_hw[sensor].scale_table_len * 2; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *type = IIO_VAL_INT; + *vals = (const int *)bmi323_accel_gyro_avrg; + *length = ARRAY_SIZE(bmi323_accel_gyro_avrg); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int bmi323_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct bmi323_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = bmi323_set_odr(data, bmi323_iio_to_sensor(chan->type), + val, val2); + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_CHAN_INFO_SCALE: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = bmi323_set_scale(data, bmi323_iio_to_sensor(chan->type), + val, val2); + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = bmi323_set_average(data, bmi323_iio_to_sensor(chan->type), + val); + + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_CHAN_INFO_ENABLE: + return bmi323_enable_steps(data, val); + case IIO_CHAN_INFO_PROCESSED: + scoped_guard(mutex, &data->mutex) { + if (val || !FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, + data->feature_events)) + return -EINVAL; + + /* Clear step counter value */ + ret = bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG, + BMI323_STEP_SC1_RST_CNT_MSK, + FIELD_PREP(BMI323_STEP_SC1_RST_CNT_MSK, + 1)); + } + return ret; + default: + return -EINVAL; + } +} + +static int bmi323_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct bmi323_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + return bmi323_read_steps(data, val); + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_ACCEL: + case IIO_ANGL_VEL: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = bmi323_read_axis(data, chan, val); + + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_TEMP: + return bmi323_get_temp_data(data, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + return bmi323_get_odr(data, bmi323_iio_to_sensor(chan->type), + val, val2); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ACCEL: + case IIO_ANGL_VEL: + *val = 0; + return bmi323_get_scale(data, + bmi323_iio_to_sensor(chan->type), + val2); + case IIO_TEMP: + *val = BMI323_TEMP_SCALE / MEGA; + *val2 = BMI323_TEMP_SCALE % MEGA; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return bmi323_get_average(data, + bmi323_iio_to_sensor(chan->type), + val); + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + *val = BMI323_TEMP_OFFSET; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_ENABLE: + scoped_guard(mutex, &data->mutex) + *val = FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, + data->feature_events); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info bmi323_info = { + .read_raw = bmi323_read_raw, + .write_raw = bmi323_write_raw, + .read_avail = bmi323_read_avail, + .hwfifo_set_watermark = bmi323_set_watermark, + .write_event_config = bmi323_write_event_config, + .read_event_config = bmi323_read_event_config, + .write_event_value = bmi323_write_event_value, + .read_event_value = bmi323_read_event_value, + .event_attrs = &bmi323_event_attribute_group, +}; + +#define BMI323_SCAN_MASK_ACCEL_3AXIS \ + (BIT(BMI323_ACCEL_X) | BIT(BMI323_ACCEL_Y) | BIT(BMI323_ACCEL_Z)) + +#define BMI323_SCAN_MASK_GYRO_3AXIS \ + (BIT(BMI323_GYRO_X) | BIT(BMI323_GYRO_Y) | BIT(BMI323_GYRO_Z)) + +static const unsigned long bmi323_avail_scan_masks[] = { + /* 3-axis accel */ + BMI323_SCAN_MASK_ACCEL_3AXIS, + /* 3-axis gyro */ + BMI323_SCAN_MASK_GYRO_3AXIS, + /* 3-axis accel + 3-axis gyro */ + BMI323_SCAN_MASK_ACCEL_3AXIS | BMI323_SCAN_MASK_GYRO_3AXIS, + 0 +}; + +static int bmi323_int_pin_config(struct bmi323_data *data, + enum bmi323_irq_pin irq_pin, + bool active_high, bool open_drain, bool latch) +{ + unsigned int mask, field_value; + int ret; + + ret = regmap_update_bits(data->regmap, BMI323_IO_INT_CONF_REG, + BMI323_IO_INT_LTCH_MSK, + FIELD_PREP(BMI323_IO_INT_LTCH_MSK, latch)); + if (ret) + return ret; + + ret = bmi323_update_ext_reg(data, BMI323_GEN_SET1_REG, + BMI323_GEN_HOLD_DUR_MSK, + FIELD_PREP(BMI323_GEN_HOLD_DUR_MSK, 0)); + if (ret) + return ret; + + switch (irq_pin) { + case BMI323_IRQ_INT1: + mask = BMI323_IO_INT1_LVL_OD_OP_MSK; + + field_value = FIELD_PREP(BMI323_IO_INT1_LVL_MSK, active_high) | + FIELD_PREP(BMI323_IO_INT1_OD_MSK, open_drain) | + FIELD_PREP(BMI323_IO_INT1_OP_EN_MSK, 1); + break; + case BMI323_IRQ_INT2: + mask = BMI323_IO_INT2_LVL_OD_OP_MSK; + + field_value = FIELD_PREP(BMI323_IO_INT2_LVL_MSK, active_high) | + FIELD_PREP(BMI323_IO_INT2_OD_MSK, open_drain) | + FIELD_PREP(BMI323_IO_INT2_OP_EN_MSK, 1); + break; + default: + return -EINVAL; + } + + return regmap_update_bits(data->regmap, BMI323_IO_INT_CTR_REG, mask, + field_value); +} + +static int bmi323_trigger_probe(struct bmi323_data *data, + struct iio_dev *indio_dev) +{ + bool open_drain, active_high, latch; + struct fwnode_handle *fwnode; + enum bmi323_irq_pin irq_pin; + int ret, irq, irq_type; + struct irq_data *desc; + + fwnode = dev_fwnode(data->dev); + if (!fwnode) + return -ENODEV; + + irq = fwnode_irq_get_byname(fwnode, "INT1"); + if (irq > 0) { + irq_pin = BMI323_IRQ_INT1; + } else { + irq = fwnode_irq_get_byname(fwnode, "INT2"); + if (irq < 0) + return 0; + + irq_pin = BMI323_IRQ_INT2; + } + + desc = irq_get_irq_data(irq); + if (!desc) + return dev_err_probe(data->dev, -EINVAL, + "Could not find IRQ %d\n", irq); + + irq_type = irqd_get_trigger_type(desc); + switch (irq_type) { + case IRQF_TRIGGER_RISING: + latch = false; + active_high = true; + break; + case IRQF_TRIGGER_HIGH: + latch = true; + active_high = true; + break; + case IRQF_TRIGGER_FALLING: + latch = false; + active_high = false; + break; + case IRQF_TRIGGER_LOW: + latch = true; + active_high = false; + break; + default: + return dev_err_probe(data->dev, -EINVAL, + "Invalid interrupt type 0x%x specified\n", + irq_type); + } + + open_drain = fwnode_property_read_bool(fwnode, "drive-open-drain"); + + ret = bmi323_int_pin_config(data, irq_pin, active_high, open_drain, + latch); + if (ret) + return dev_err_probe(data->dev, ret, + "Failed to configure irq line\n"); + + data->trig = devm_iio_trigger_alloc(data->dev, "%s-trig-%d", + indio_dev->name, irq_pin); + if (!data->trig) + return -ENOMEM; + + data->trig->ops = &bmi323_trigger_ops; + iio_trigger_set_drvdata(data->trig, data); + + ret = devm_request_threaded_irq(data->dev, irq, NULL, + bmi323_irq_thread_handler, + IRQF_ONESHOT, "bmi323-int", indio_dev); + if (ret) + return dev_err_probe(data->dev, ret, "Failed to request IRQ\n"); + + ret = devm_iio_trigger_register(data->dev, data->trig); + if (ret) + return dev_err_probe(data->dev, ret, + "Trigger registration failed\n"); + + data->irq_pin = irq_pin; + + return 0; +} + +static int bmi323_feature_engine_enable(struct bmi323_data *data, bool en) +{ + unsigned int feature_status; + int ret; + + if (!en) + return regmap_write(data->regmap, BMI323_FEAT_CTRL_REG, 0); + + ret = regmap_write(data->regmap, BMI323_FEAT_IO2_REG, 0x012c); + if (ret) + return ret; + + ret = regmap_write(data->regmap, BMI323_FEAT_IO_STATUS_REG, + BMI323_FEAT_IO_STATUS_MSK); + if (ret) + return ret; + + ret = regmap_write(data->regmap, BMI323_FEAT_CTRL_REG, + BMI323_FEAT_ENG_EN_MSK); + if (ret) + return ret; + + /* + * It takes around 4 msec to enable the Feature engine, so check + * the status of the feature engine every 2 msec for a maximum + * of 5 trials. + */ + ret = regmap_read_poll_timeout(data->regmap, BMI323_FEAT_IO1_REG, + feature_status, + FIELD_GET(BMI323_FEAT_IO1_ERR_MSK, + feature_status) == 1, + BMI323_FEAT_ENG_POLL, + BMI323_FEAT_ENG_TIMEOUT); + if (ret) + return dev_err_probe(data->dev, -EINVAL, + "Failed to enable feature engine\n"); + + return 0; +} + +static void bmi323_disable(void *data_ptr) +{ + struct bmi323_data *data = data_ptr; + + bmi323_set_mode(data, BMI323_ACCEL, ACC_GYRO_MODE_DISABLE); + bmi323_set_mode(data, BMI323_GYRO, ACC_GYRO_MODE_DISABLE); +} + +static int bmi323_set_bw(struct bmi323_data *data, + enum bmi323_sensor_type sensor, enum bmi323_3db_bw bw) +{ + return regmap_update_bits(data->regmap, bmi323_hw[sensor].config, + BMI323_ACC_GYRO_CONF_BW_MSK, + FIELD_PREP(BMI323_ACC_GYRO_CONF_BW_MSK, bw)); +} + +static int bmi323_init(struct bmi323_data *data) +{ + int ret, val; + + /* + * Perform soft reset to make sure the device is in a known state after + * start up. A delay of 1.5 ms is required after reset. + * See datasheet section 5.17 "Soft Reset". + */ + ret = regmap_write(data->regmap, BMI323_CMD_REG, BMI323_RST_VAL); + if (ret) + return ret; + + usleep_range(1500, 2000); + + /* + * Dummy read is required to enable SPI interface after reset. + * See datasheet section 7.2.1 "Protocol Selection". + */ + regmap_read(data->regmap, BMI323_CHIP_ID_REG, &val); + + ret = regmap_read(data->regmap, BMI323_STATUS_REG, &val); + if (ret) + return ret; + + if (!FIELD_GET(BMI323_STATUS_POR_MSK, val)) + return dev_err_probe(data->dev, -EINVAL, + "Sensor initialization error\n"); + + ret = regmap_read(data->regmap, BMI323_CHIP_ID_REG, &val); + if (ret) + return ret; + + if (FIELD_GET(BMI323_CHIP_ID_MSK, val) != BMI323_CHIP_ID_VAL) + return dev_err_probe(data->dev, -EINVAL, "Chip ID mismatch\n"); + + ret = bmi323_feature_engine_enable(data, true); + if (ret) + return ret; + + ret = regmap_read(data->regmap, BMI323_ERR_REG, &val); + if (ret) + return ret; + + if (val) + return dev_err_probe(data->dev, -EINVAL, + "Sensor power error = 0x%x\n", val); + + /* + * Set the Bandwidth coefficient which defines the 3 dB cutoff + * frequency in relation to the ODR. + */ + ret = bmi323_set_bw(data, BMI323_ACCEL, BMI323_BW_ODR_BY_2); + if (ret) + return ret; + + ret = bmi323_set_bw(data, BMI323_GYRO, BMI323_BW_ODR_BY_2); + if (ret) + return ret; + + ret = bmi323_set_odr(data, BMI323_ACCEL, 25, 0); + if (ret) + return ret; + + ret = bmi323_set_odr(data, BMI323_GYRO, 25, 0); + if (ret) + return ret; + + return devm_add_action_or_reset(data->dev, bmi323_disable, data); +} + +int bmi323_core_probe(struct device *dev) +{ + static const char * const regulator_names[] = { "vdd", "vddio" }; + struct iio_dev *indio_dev; + struct bmi323_data *data; + struct regmap *regmap; + int ret; + + regmap = dev_get_regmap(dev, NULL); + if (!regmap) + return dev_err_probe(dev, -ENODEV, "Failed to get regmap\n"); + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return dev_err_probe(dev, -ENOMEM, + "Failed to allocate device\n"); + + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names), + regulator_names); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable regulators\n"); + + data = iio_priv(indio_dev); + data->dev = dev; + data->regmap = regmap; + mutex_init(&data->mutex); + + ret = bmi323_init(data); + if (ret) + return -EINVAL; + + ret = iio_read_mount_matrix(dev, &data->orientation); + if (ret) + return ret; + + indio_dev->name = "bmi323-imu"; + indio_dev->info = &bmi323_info; + indio_dev->channels = bmi323_channels; + indio_dev->num_channels = ARRAY_SIZE(bmi323_channels); + indio_dev->available_scan_masks = bmi323_avail_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + dev_set_drvdata(data->dev, indio_dev); + + ret = bmi323_trigger_probe(data, indio_dev); + if (ret) + return -EINVAL; + + ret = devm_iio_triggered_buffer_setup_ext(data->dev, indio_dev, + &iio_pollfunc_store_time, + bmi323_trigger_handler, + IIO_BUFFER_DIRECTION_IN, + &bmi323_buffer_ops, + bmi323_fifo_attributes); + if (ret) + return dev_err_probe(data->dev, ret, + "Failed to setup trigger buffer\n"); + + ret = devm_iio_device_register(data->dev, indio_dev); + if (ret) + return dev_err_probe(data->dev, ret, + "Unable to register iio device\n"); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(bmi323_core_probe, IIO_BMI323); + +MODULE_DESCRIPTION("Bosch BMI323 IMU driver"); +MODULE_AUTHOR("Jagath Jog J "); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/bmi323/bmi323_i2c.c b/drivers/iio/imu/bmi323/bmi323_i2c.c new file mode 100644 index 0000000000..20a8001b99 --- /dev/null +++ b/drivers/iio/imu/bmi323/bmi323_i2c.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * I2C driver for Bosch BMI323 6-Axis IMU. + * + * Copyright (C) 2023, Jagath Jog J + */ + +#include +#include +#include +#include + +#include "bmi323.h" + +struct bmi323_i2c_priv { + struct i2c_client *i2c; + u8 i2c_rx_buffer[BMI323_FIFO_LENGTH_IN_BYTES + BMI323_I2C_DUMMY]; +}; + +/* + * From BMI323 datasheet section 4: Notes on the Serial Interface Support. + * Each I2C register read operation requires to read two dummy bytes before + * the actual payload. + */ +static int bmi323_regmap_i2c_read(void *context, const void *reg_buf, + size_t reg_size, void *val_buf, + size_t val_size) +{ + struct bmi323_i2c_priv *priv = context; + struct i2c_msg msgs[2]; + int ret; + + msgs[0].addr = priv->i2c->addr; + msgs[0].flags = priv->i2c->flags; + msgs[0].len = reg_size; + msgs[0].buf = (u8 *)reg_buf; + + msgs[1].addr = priv->i2c->addr; + msgs[1].len = val_size + BMI323_I2C_DUMMY; + msgs[1].buf = priv->i2c_rx_buffer; + msgs[1].flags = priv->i2c->flags | I2C_M_RD; + + ret = i2c_transfer(priv->i2c->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return -EIO; + + memcpy(val_buf, priv->i2c_rx_buffer + BMI323_I2C_DUMMY, val_size); + + return 0; +} + +static int bmi323_regmap_i2c_write(void *context, const void *data, + size_t count) +{ + struct bmi323_i2c_priv *priv = context; + u8 reg; + + reg = *(u8 *)data; + return i2c_smbus_write_i2c_block_data(priv->i2c, reg, + count - sizeof(u8), + data + sizeof(u8)); +} + +static struct regmap_bus bmi323_regmap_bus = { + .read = bmi323_regmap_i2c_read, + .write = bmi323_regmap_i2c_write, +}; + +static const struct regmap_config bmi323_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = BMI323_CFG_RES_REG, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int bmi323_i2c_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct bmi323_i2c_priv *priv; + struct regmap *regmap; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->i2c = i2c; + regmap = devm_regmap_init(dev, &bmi323_regmap_bus, priv, + &bmi323_i2c_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize I2C Regmap\n"); + + return bmi323_core_probe(dev); +} + +static const struct i2c_device_id bmi323_i2c_ids[] = { + { "bmi323" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bmi323_i2c_ids); + +static const struct of_device_id bmi323_of_i2c_match[] = { + { .compatible = "bosch,bmi323" }, + { } +}; +MODULE_DEVICE_TABLE(of, bmi323_of_i2c_match); + +static struct i2c_driver bmi323_i2c_driver = { + .driver = { + .name = "bmi323", + .of_match_table = bmi323_of_i2c_match, + }, + .probe = bmi323_i2c_probe, + .id_table = bmi323_i2c_ids, +}; +module_i2c_driver(bmi323_i2c_driver); + +MODULE_DESCRIPTION("Bosch BMI323 IMU driver"); +MODULE_AUTHOR("Jagath Jog J "); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_BMI323); diff --git a/drivers/iio/imu/bmi323/bmi323_spi.c b/drivers/iio/imu/bmi323/bmi323_spi.c new file mode 100644 index 0000000000..7b1e8127d0 --- /dev/null +++ b/drivers/iio/imu/bmi323/bmi323_spi.c @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SPI driver for Bosch BMI323 6-Axis IMU. + * + * Copyright (C) 2023, Jagath Jog J + */ + +#include +#include +#include +#include + +#include "bmi323.h" + +/* + * From BMI323 datasheet section 4: Notes on the Serial Interface Support. + * Each SPI register read operation requires to read one dummy byte before + * the actual payload. + */ +static int bmi323_regmap_spi_read(void *context, const void *reg_buf, + size_t reg_size, void *val_buf, + size_t val_size) +{ + struct spi_device *spi = context; + + return spi_write_then_read(spi, reg_buf, reg_size, val_buf, val_size); +} + +static int bmi323_regmap_spi_write(void *context, const void *data, + size_t count) +{ + struct spi_device *spi = context; + u8 *data_buff = (u8 *)data; + + data_buff[1] = data_buff[0]; + return spi_write(spi, data_buff + 1, count - 1); +} + +static struct regmap_bus bmi323_regmap_bus = { + .read = bmi323_regmap_spi_read, + .write = bmi323_regmap_spi_write, +}; + +static const struct regmap_config bmi323_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .pad_bits = 8, + .read_flag_mask = BIT(7), + .max_register = BMI323_CFG_RES_REG, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int bmi323_spi_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct regmap *regmap; + + regmap = devm_regmap_init(dev, &bmi323_regmap_bus, dev, + &bmi323_spi_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize SPI Regmap\n"); + + return bmi323_core_probe(dev); +} + +static const struct spi_device_id bmi323_spi_ids[] = { + { "bmi323" }, + { } +}; +MODULE_DEVICE_TABLE(spi, bmi323_spi_ids); + +static const struct of_device_id bmi323_of_spi_match[] = { + { .compatible = "bosch,bmi323" }, + { } +}; +MODULE_DEVICE_TABLE(of, bmi323_of_spi_match); + +static struct spi_driver bmi323_spi_driver = { + .driver = { + .name = "bmi323", + .of_match_table = bmi323_of_spi_match, + }, + .probe = bmi323_spi_probe, + .id_table = bmi323_spi_ids, +}; +module_spi_driver(bmi323_spi_driver); + +MODULE_DESCRIPTION("Bosch BMI323 IMU driver"); +MODULE_AUTHOR("Jagath Jog J "); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_BMI323); diff --git a/drivers/iio/imu/bno055/bno055_ser_core.c b/drivers/iio/imu/bno055/bno055_ser_core.c index 57728a5684..5677bdf4f8 100644 --- a/drivers/iio/imu/bno055/bno055_ser_core.c +++ b/drivers/iio/imu/bno055/bno055_ser_core.c @@ -378,12 +378,12 @@ static void bno055_ser_handle_rx(struct bno055_ser_priv *priv, int status) * Also, we assume to RX one pkt per time (i.e. the HW doesn't send anything * unless we require to AND we don't queue more than one request per time). */ -static int bno055_ser_receive_buf(struct serdev_device *serdev, - const unsigned char *buf, size_t size) +static ssize_t bno055_ser_receive_buf(struct serdev_device *serdev, + const u8 *buf, size_t size) { int status; struct bno055_ser_priv *priv = serdev_device_get_drvdata(serdev); - int remaining = size; + size_t remaining = size; if (size == 0) return 0; diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c index b1e4fde27d..f67bd5a39b 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c @@ -137,10 +137,7 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev, out_unlock: mutex_unlock(&st->lock); /* sleep maximum required time */ - if (sleep_accel > sleep_temp) - sleep = sleep_accel; - else - sleep = sleep_temp; + sleep = max(sleep_accel, sleep_temp); if (sleep) msleep(sleep); return ret; diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c index 6ef1df9d60..b52f328fd2 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c @@ -424,10 +424,7 @@ out_unlock: mutex_unlock(&st->lock); /* sleep maximum required time */ - if (sleep_sensor > sleep_temp) - sleep = sleep_sensor; - else - sleep = sleep_temp; + sleep = max(sleep_sensor, sleep_temp); if (sleep) msleep(sleep); diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c index 3bf946e56e..3df0a715e8 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c @@ -137,10 +137,7 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev, out_unlock: mutex_unlock(&st->lock); /* sleep maximum required time */ - if (sleep_gyro > sleep_temp) - sleep = sleep_gyro; - else - sleep = sleep_temp; + sleep = max(sleep_gyro, sleep_temp); if (sleep) msleep(sleep); return ret; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 6b034dccc3..0e94e5335e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -567,15 +567,12 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) static int inv_mpu6050_sensor_set(struct inv_mpu6050_state *st, int reg, int axis, int val) { - int ind, result; + int ind; __be16 d = cpu_to_be16(val); ind = (axis - IIO_MOD_X) * 2; - result = regmap_bulk_write(st->map, reg + ind, &d, sizeof(d)); - if (result) - return -EINVAL; - return 0; + return regmap_bulk_write(st->map, reg + ind, &d, sizeof(d)); } static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, @@ -587,7 +584,7 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, ind = (axis - IIO_MOD_X) * 2; result = regmap_bulk_read(st->map, reg + ind, &d, sizeof(d)); if (result) - return -EINVAL; + return result; *val = (short)be16_to_cpup(&d); return IIO_VAL_INT; diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 176d31d9f9..b581a7e805 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -413,6 +413,22 @@ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks, { if (bitmap_empty(mask, masklength)) return NULL; + /* + * The condition here do not handle multi-long masks correctly. + * It only checks the first long to be zero, and will use such mask + * as a terminator even if there was bits set after the first long. + * + * Correct check would require using: + * while (!bitmap_empty(av_masks, masklength)) + * instead. This is potentially hazardous because the + * avaliable_scan_masks is a zero terminated array of longs - and + * using the proper bitmap_empty() check for multi-long wide masks + * would require the array to be terminated with multiple zero longs - + * which is not such an usual pattern. + * + * As writing of this no multi-long wide masks were found in-tree, so + * the simple while (*av_masks) check is working. + */ while (*av_masks) { if (strict) { if (bitmap_equal(mask, av_masks, masklength)) @@ -600,7 +616,7 @@ static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev, &iio_show_fixed_type, NULL, 0, - 0, + IIO_SEPARATE, &indio_dev->dev, buffer, &buffer->buffer_attr_list); @@ -613,7 +629,7 @@ static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev, &iio_scan_el_show, &iio_scan_el_store, chan->scan_index, - 0, + IIO_SEPARATE, &indio_dev->dev, buffer, &buffer->buffer_attr_list); @@ -623,7 +639,7 @@ static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev, &iio_scan_el_ts_show, &iio_scan_el_ts_store, chan->scan_index, - 0, + IIO_SEPARATE, &indio_dev->dev, buffer, &buffer->buffer_attr_list); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index e6d3d07a4c..173dc00762 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -117,6 +117,8 @@ static const char * const iio_modifier_names[] = { [IIO_MOD_LIGHT_GREEN] = "green", [IIO_MOD_LIGHT_BLUE] = "blue", [IIO_MOD_LIGHT_UV] = "uv", + [IIO_MOD_LIGHT_UVA] = "uva", + [IIO_MOD_LIGHT_UVB] = "uvb", [IIO_MOD_LIGHT_DUV] = "duv", [IIO_MOD_QUATERNION] = "quaternion", [IIO_MOD_TEMP_AMBIENT] = "ambient", @@ -182,6 +184,7 @@ static const char * const iio_chan_info_postfix[] = { [IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type", [IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient", [IIO_CHAN_INFO_ZEROPOINT] = "zeropoint", + [IIO_CHAN_INFO_TROUGH] = "trough_raw", }; /** * iio_device_id() - query the unique ID for the device @@ -1899,6 +1902,66 @@ static int iio_check_extended_name(const struct iio_dev *indio_dev) static const struct iio_buffer_setup_ops noop_ring_setup_ops; +static void iio_sanity_check_avail_scan_masks(struct iio_dev *indio_dev) +{ + unsigned int num_masks, masklength, longs_per_mask; + const unsigned long *av_masks; + int i; + + av_masks = indio_dev->available_scan_masks; + masklength = indio_dev->masklength; + longs_per_mask = BITS_TO_LONGS(masklength); + + /* + * The code determining how many available_scan_masks is in the array + * will be assuming the end of masks when first long with all bits + * zeroed is encountered. This is incorrect for masks where mask + * consists of more than one long, and where some of the available masks + * has long worth of bits zeroed (but has subsequent bit(s) set). This + * is a safety measure against bug where array of masks is terminated by + * a single zero while mask width is greater than width of a long. + */ + if (longs_per_mask > 1) + dev_warn(indio_dev->dev.parent, + "multi long available scan masks not fully supported\n"); + + if (bitmap_empty(av_masks, masklength)) + dev_warn(indio_dev->dev.parent, "empty scan mask\n"); + + for (num_masks = 0; *av_masks; num_masks++) + av_masks += longs_per_mask; + + if (num_masks < 2) + return; + + av_masks = indio_dev->available_scan_masks; + + /* + * Go through all the masks from first to one before the last, and see + * that no mask found later from the available_scan_masks array is a + * subset of mask found earlier. If this happens, then the mask found + * later will never get used because scanning the array is stopped when + * the first suitable mask is found. Drivers should order the array of + * available masks in the order of preference (presumably the least + * costy to access masks first). + */ + for (i = 0; i < num_masks - 1; i++) { + const unsigned long *mask1; + int j; + + mask1 = av_masks + i * longs_per_mask; + for (j = i + 1; j < num_masks; j++) { + const unsigned long *mask2; + + mask2 = av_masks + j * longs_per_mask; + if (bitmap_subset(mask2, mask1, masklength)) + dev_warn(indio_dev->dev.parent, + "available_scan_mask %d subset of %d. Never used\n", + j, i); + } + } +} + int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); @@ -1937,6 +2000,9 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod) goto error_unreg_debugfs; } + if (indio_dev->available_scan_masks) + iio_sanity_check_avail_scan_masks(indio_dev); + ret = iio_device_register_sysfs(indio_dev); if (ret) { dev_err(indio_dev->dev.parent, diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 45edba797e..143003232d 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -252,6 +252,21 @@ config ISL29125 To compile this driver as a module, choose M here: the module will be called isl29125. +config ISL76682 + tristate "Intersil ISL76682 Light Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build a driver for the Intersil ISL76682 + Ambient Light Sensor and IR Intensity sensor. This driver provides + the readouts via standard IIO sysfs and device interface. Both ALS + illuminance and IR illuminance are provided raw with separate scale + setting which can be configured via sysfs, the default scale is 1000 + lux, other options are 4000/16000/64000 lux. + + To compile this driver as a module, choose M here: the module will be + called isl76682. + config HID_SENSOR_ALS depends on HID_SENSOR_HUB select IIO_BUFFER @@ -347,6 +362,17 @@ config SENSORS_LM3533 changes. The ALS-control output values can be set per zone for the three current output channels. +config LTR390 + tristate "LTR-390UV-01 ambient light and UV sensor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Lite-On LTR-390UV-01 + ambient light and UV sensor. + + This driver can also be built as a module. If so, the module + will be called ltr390. + config LTR501 tristate "LTR-501ALS-01 light sensor" depends on I2C @@ -637,6 +663,17 @@ config VEML6070 To compile this driver as a module, choose M here: the module will be called veml6070. +config VEML6075 + tristate "VEML6075 UVA and UVB light sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6075 UVA + and UVB light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6075. + config VL6180 tristate "VL6180 ALS, range and proximity sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index c0db4c4c36..2e5fdb33e0 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -28,8 +28,10 @@ obj-$(CONFIG_IQS621_ALS) += iqs621-als.o obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o obj-$(CONFIG_ISL29125) += isl29125.o +obj-$(CONFIG_ISL76682) += isl76682.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o +obj-$(CONFIG_LTR390) += ltr390.o obj-$(CONFIG_LTR501) += ltr501.o obj-$(CONFIG_LTRF216A) += ltrf216a.o obj-$(CONFIG_LV0104CS) += lv0104cs.o @@ -60,5 +62,6 @@ obj-$(CONFIG_VCNL4000) += vcnl4000.o obj-$(CONFIG_VCNL4035) += vcnl4035.o obj-$(CONFIG_VEML6030) += veml6030.o obj-$(CONFIG_VEML6070) += veml6070.o +obj-$(CONFIG_VEML6075) += veml6075.o obj-$(CONFIG_VL6180) += vl6180.o obj-$(CONFIG_ZOPT2201) += zopt2201.o diff --git a/drivers/iio/light/isl76682.c b/drivers/iio/light/isl76682.c new file mode 100644 index 0000000000..cf6ddee44f --- /dev/null +++ b/drivers/iio/light/isl76682.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IIO driver for the light sensor ISL76682. + * ISL76682 is Ambient Light Sensor + * + * Copyright (c) 2023 Marek Vasut + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define ISL76682_REG_COMMAND 0x00 + +#define ISL76682_COMMAND_EN BIT(7) +#define ISL76682_COMMAND_MODE_CONTINUOUS BIT(6) +#define ISL76682_COMMAND_LIGHT_IR BIT(5) + +#define ISL76682_COMMAND_RANGE_LUX_1K 0x0 +#define ISL76682_COMMAND_RANGE_LUX_4K 0x1 +#define ISL76682_COMMAND_RANGE_LUX_16K 0x2 +#define ISL76682_COMMAND_RANGE_LUX_64K 0x3 +#define ISL76682_COMMAND_RANGE_LUX_MASK GENMASK(1, 0) + +#define ISL76682_REG_ALSIR_L 0x01 + +#define ISL76682_REG_ALSIR_U 0x02 + +#define ISL76682_NUM_REGS (ISL76682_REG_ALSIR_U + 1) + +#define ISL76682_CONV_TIME_MS 100 +#define ISL76682_INT_TIME_US 90000 + +#define ISL76682_ADC_MAX (BIT(16) - 1) + +struct isl76682_chip { + /* + * Lock to synchronize access to device command register + * and the content of range variable below. + */ + struct mutex lock; + struct regmap *regmap; + u8 range; + u8 command; +}; + +struct isl76682_range { + u8 range; + u32 als; + u32 ir; +}; + +static struct isl76682_range isl76682_range_table[] = { + { ISL76682_COMMAND_RANGE_LUX_1K, 15000, 10500 }, + { ISL76682_COMMAND_RANGE_LUX_4K, 60000, 42000 }, + { ISL76682_COMMAND_RANGE_LUX_16K, 240000, 168000 }, + { ISL76682_COMMAND_RANGE_LUX_64K, 960000, 673000 } +}; + +static int isl76682_get(struct isl76682_chip *chip, bool mode_ir, int *data) +{ + u8 command; + int ret; + + command = ISL76682_COMMAND_EN | ISL76682_COMMAND_MODE_CONTINUOUS | + chip->range; + + if (mode_ir) + command |= ISL76682_COMMAND_LIGHT_IR; + + if (command != chip->command) { + ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, command); + if (ret) + return ret; + + /* Need to wait for conversion time if ALS/IR mode enabled */ + msleep(ISL76682_CONV_TIME_MS); + + chip->command = command; + } + + ret = regmap_bulk_read(chip->regmap, ISL76682_REG_ALSIR_L, data, 2); + *data &= ISL76682_ADC_MAX; + return ret; +} + +static int isl76682_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct isl76682_chip *chip = iio_priv(indio_dev); + int i; + + if (mask != IIO_CHAN_INFO_SCALE) + return -EINVAL; + + if (val != 0) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(isl76682_range_table); i++) { + if (chan->type == IIO_LIGHT && val2 != isl76682_range_table[i].als) + continue; + if (chan->type == IIO_INTENSITY && val2 != isl76682_range_table[i].ir) + continue; + + scoped_guard(mutex, &chip->lock) + chip->range = isl76682_range_table[i].range; + return 0; + } + + return -EINVAL; +} + +static int isl76682_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct isl76682_chip *chip = iio_priv(indio_dev); + int ret; + int i; + + guard(mutex)(&chip->lock); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + ret = isl76682_get(chip, false, val); + return (ret < 0) ? ret : IIO_VAL_INT; + case IIO_INTENSITY: + ret = isl76682_get(chip, true, val); + return (ret < 0) ? ret : IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + for (i = 0; i < ARRAY_SIZE(isl76682_range_table); i++) { + if (chip->range != isl76682_range_table[i].range) + continue; + + *val = 0; + switch (chan->type) { + case IIO_LIGHT: + *val2 = isl76682_range_table[i].als; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_INTENSITY: + *val2 = isl76682_range_table[i].ir; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + } + return -EINVAL; + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = ISL76682_INT_TIME_US; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int illuminance_scale_available[] = { + 0, 15000, + 0, 60000, + 0, 240000, + 0, 960000, +}; + +static int intensity_scale_available[] = { + 0, 10500, + 0, 42000, + 0, 168000, + 0, 673000, +}; + +static int isl76682_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, + int *length, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_LIGHT: + *vals = illuminance_scale_available; + *length = ARRAY_SIZE(illuminance_scale_available); + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + case IIO_INTENSITY: + *vals = intensity_scale_available; + *length = ARRAY_SIZE(intensity_scale_available); + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec isl76682_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), + }, { + .type = IIO_INTENSITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), + } +}; + +static const struct iio_info isl76682_info = { + .read_avail = isl76682_read_avail, + .read_raw = isl76682_read_raw, + .write_raw = isl76682_write_raw, +}; + +static int isl76682_clear_configure_reg(struct isl76682_chip *chip) +{ + struct device *dev = regmap_get_device(chip->regmap); + int ret; + + ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, 0x0); + if (ret < 0) + dev_err(dev, "Error %d clearing the CONFIGURE register\n", ret); + + /* + * In the success case, the command register was zeroed out. + * + * In the error case, we do not know in which state the command + * register is, so we assume it is zeroed out, so that it would + * be reprogrammed at the next data read out, and at that time + * we hope it would be reprogrammed successfully. That is very + * much a best effort approach. + */ + chip->command = 0; + + return ret; +} + +static void isl76682_reset_action(void *chip) +{ + isl76682_clear_configure_reg(chip); +} + +static bool isl76682_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ISL76682_REG_ALSIR_L: + case ISL76682_REG_ALSIR_U: + return true; + default: + return false; + } +} + +static const struct regmap_config isl76682_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = isl76682_is_volatile_reg, + .max_register = ISL76682_NUM_REGS - 1, + .num_reg_defaults_raw = ISL76682_NUM_REGS, + .cache_type = REGCACHE_FLAT, +}; + +static int isl76682_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct isl76682_chip *chip; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + + mutex_init(&chip->lock); + + chip->regmap = devm_regmap_init_i2c(client, &isl76682_regmap_config); + ret = PTR_ERR_OR_ZERO(chip->regmap); + if (ret) + return dev_err_probe(dev, ret, "Error initializing regmap\n"); + + chip->range = ISL76682_COMMAND_RANGE_LUX_1K; + + ret = isl76682_clear_configure_reg(chip); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(dev, isl76682_reset_action, chip); + if (ret) + return ret; + + indio_dev->info = &isl76682_info; + indio_dev->channels = isl76682_channels; + indio_dev->num_channels = ARRAY_SIZE(isl76682_channels); + indio_dev->name = "isl76682"; + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct i2c_device_id isl76682_id[] = { + { "isl76682" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isl76682_id); + +static const struct of_device_id isl76682_of_match[] = { + { .compatible = "isil,isl76682" }, + { } +}; +MODULE_DEVICE_TABLE(of, isl76682_of_match); + +static struct i2c_driver isl76682_driver = { + .driver = { + .name = "isl76682", + .of_match_table = isl76682_of_match, + }, + .probe = isl76682_probe, + .id_table = isl76682_id, +}; +module_i2c_driver(isl76682_driver); + +MODULE_DESCRIPTION("ISL76682 Ambient Light Sensor driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marek Vasut "); diff --git a/drivers/iio/light/ltr390.c b/drivers/iio/light/ltr390.c new file mode 100644 index 0000000000..fff1e89909 --- /dev/null +++ b/drivers/iio/light/ltr390.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * IIO driver for Lite-On LTR390 ALS and UV sensor + * (7-bit I2C slave address 0x53) + * + * Based on the work of: + * Shreeya Patel and Shi Zhigang (LTRF216 Driver) + * + * Copyright (C) 2023 Anshul Dalal + * + * Datasheet: + * https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf + * + * TODO: + * - Support for configurable gain and resolution + * - Sensor suspend/resume support + * - Add support for reading the ALS + * - Interrupt support + */ + +#include +#include +#include +#include +#include + +#include + +#include + +#define LTR390_MAIN_CTRL 0x00 +#define LTR390_PART_ID 0x06 +#define LTR390_UVS_DATA 0x10 + +#define LTR390_SW_RESET BIT(4) +#define LTR390_UVS_MODE BIT(3) +#define LTR390_SENSOR_ENABLE BIT(1) + +#define LTR390_PART_NUMBER_ID 0xb + +/* + * At 20-bit resolution (integration time: 400ms) and 18x gain, 2300 counts of + * the sensor are equal to 1 UV Index [Datasheet Page#8]. + * + * For the default resolution of 18-bit (integration time: 100ms) and default + * gain of 3x, the counts/uvi are calculated as follows: + * 2300 / ((3/18) * (100/400)) = 95.83 + */ +#define LTR390_COUNTS_PER_UVI 96 + +/* + * Window Factor is needed when the device is under Window glass with coated + * tinted ink. This is to compensate for the light loss due to the lower + * transmission rate of the window glass and helps * in calculating lux. + */ +#define LTR390_WINDOW_FACTOR 1 + +struct ltr390_data { + struct regmap *regmap; + struct i2c_client *client; + /* Protects device from simulataneous reads */ + struct mutex lock; +}; + +static const struct regmap_config ltr390_regmap_config = { + .name = "ltr390", + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, +}; + +static int ltr390_register_read(struct ltr390_data *data, u8 register_address) +{ + struct device *dev = &data->client->dev; + int ret; + u8 recieve_buffer[3]; + + guard(mutex)(&data->lock); + + ret = regmap_bulk_read(data->regmap, register_address, recieve_buffer, + sizeof(recieve_buffer)); + if (ret) { + dev_err(dev, "failed to read measurement data"); + return ret; + } + + return get_unaligned_le24(recieve_buffer); +} + +static int ltr390_read_raw(struct iio_dev *iio_device, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + struct ltr390_data *data = iio_priv(iio_device); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ltr390_register_read(data, LTR390_UVS_DATA); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = LTR390_WINDOW_FACTOR; + *val2 = LTR390_COUNTS_PER_UVI; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } +} + +static const struct iio_info ltr390_info = { + .read_raw = ltr390_read_raw, +}; + +static const struct iio_chan_spec ltr390_channel = { + .type = IIO_UVINDEX, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) +}; + +static int ltr390_probe(struct i2c_client *client) +{ + struct ltr390_data *data; + struct iio_dev *indio_dev; + struct device *dev; + int ret, part_number; + + dev = &client->dev; + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + + data->regmap = devm_regmap_init_i2c(client, <r390_regmap_config); + if (IS_ERR(data->regmap)) + return dev_err_probe(dev, PTR_ERR(data->regmap), + "regmap initialization failed\n"); + + data->client = client; + mutex_init(&data->lock); + + indio_dev->info = <r390_info; + indio_dev->channels = <r390_channel; + indio_dev->num_channels = 1; + indio_dev->name = "ltr390"; + + ret = regmap_read(data->regmap, LTR390_PART_ID, &part_number); + if (ret) + return dev_err_probe(dev, ret, + "failed to get sensor's part id\n"); + /* Lower 4 bits of `part_number` change with hardware revisions */ + if (part_number >> 4 != LTR390_PART_NUMBER_ID) + dev_info(dev, "received invalid product id: 0x%x", part_number); + dev_dbg(dev, "LTR390, product id: 0x%x\n", part_number); + + /* reset sensor, chip fails to respond to this, so ignore any errors */ + regmap_set_bits(data->regmap, LTR390_MAIN_CTRL, LTR390_SW_RESET); + + /* Wait for the registers to reset before proceeding */ + usleep_range(1000, 2000); + + ret = regmap_set_bits(data->regmap, LTR390_MAIN_CTRL, + LTR390_SENSOR_ENABLE | LTR390_UVS_MODE); + if (ret) + return dev_err_probe(dev, ret, "failed to enable the sensor\n"); + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct i2c_device_id ltr390_id[] = { + { "ltr390" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, ltr390_id); + +static const struct of_device_id ltr390_of_table[] = { + { .compatible = "liteon,ltr390" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ltr390_of_table); + +static struct i2c_driver ltr390_driver = { + .driver = { + .name = "ltr390", + .of_match_table = ltr390_of_table, + }, + .probe = ltr390_probe, + .id_table = ltr390_id, +}; +module_i2c_driver(ltr390_driver); + +MODULE_AUTHOR("Anshul Dalal "); +MODULE_DESCRIPTION("Lite-On LTR390 ALS and UV sensor Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c index 8de4dd8499..68dc48420a 100644 --- a/drivers/iio/light/ltrf216a.c +++ b/drivers/iio/light/ltrf216a.c @@ -234,7 +234,7 @@ static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr) static int ltrf216a_get_lux(struct ltrf216a_data *data) { int ret, greendata; - u64 lux, div; + u64 lux; ret = ltrf216a_set_power_state(data, true); if (ret) @@ -246,10 +246,9 @@ static int ltrf216a_get_lux(struct ltrf216a_data *data) ltrf216a_set_power_state(data, false); - lux = greendata * 45 * LTRF216A_WIN_FAC * 100; - div = data->als_gain_fac * data->int_time_fac * 100; + lux = greendata * 45 * LTRF216A_WIN_FAC; - return div_u64(lux, div); + return lux; } static int ltrf216a_read_raw(struct iio_dev *indio_dev, @@ -279,7 +278,8 @@ static int ltrf216a_read_raw(struct iio_dev *indio_dev, if (ret < 0) return ret; *val = ret; - return IIO_VAL_INT; + *val2 = data->als_gain_fac * data->int_time_fac; + return IIO_VAL_FRACTIONAL; case IIO_CHAN_INFO_INT_TIME: mutex_lock(&data->lock); ret = ltrf216a_get_int_time(data, val, val2); diff --git a/drivers/iio/light/pa12203001.c b/drivers/iio/light/pa12203001.c index ed241598ae..636432c456 100644 --- a/drivers/iio/light/pa12203001.c +++ b/drivers/iio/light/pa12203001.c @@ -472,7 +472,7 @@ static struct i2c_driver pa12203001_driver = { .driver = { .name = PA12203001_DRIVER_NAME, .pm = &pa12203001_pm_ops, - .acpi_match_table = ACPI_PTR(pa12203001_acpi_match), + .acpi_match_table = pa12203001_acpi_match, }, .probe = pa12203001_probe, .remove = pa12203001_remove, diff --git a/drivers/iio/light/rohm-bu27008.c b/drivers/iio/light/rohm-bu27008.c index 6a6d778050..0f010eff19 100644 --- a/drivers/iio/light/rohm-bu27008.c +++ b/drivers/iio/light/rohm-bu27008.c @@ -130,6 +130,7 @@ * @BU27008_BLUE: Blue channel. Via data2 (when used). * @BU27008_CLEAR: Clear channel. Via data2 or data3 (when used). * @BU27008_IR: IR channel. Via data3 (when used). + * @BU27008_LUX: Illuminance channel, computed using RGB and IR. * @BU27008_NUM_CHANS: Number of channel types. */ enum bu27008_chan_type { @@ -138,6 +139,7 @@ enum bu27008_chan_type { BU27008_BLUE, BU27008_CLEAR, BU27008_IR, + BU27008_LUX, BU27008_NUM_CHANS }; @@ -172,6 +174,8 @@ static const unsigned long bu27008_scan_masks[] = { ALWAYS_SCANNABLE | BIT(BU27008_CLEAR) | BIT(BU27008_IR), /* buffer is R, G, B, IR */ ALWAYS_SCANNABLE | BIT(BU27008_BLUE) | BIT(BU27008_IR), + /* buffer is R, G, B, IR, LUX */ + ALWAYS_SCANNABLE | BIT(BU27008_BLUE) | BIT(BU27008_IR) | BIT(BU27008_LUX), 0 }; @@ -331,6 +335,19 @@ static const struct iio_chan_spec bu27008_channels[] = { * Hence we don't advertise available ones either. */ BU27008_CHAN(IR, DATA3, 0), + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = BU27008_LUX, + .scan_index = BU27008_LUX, + .scan_type = { + .sign = 'u', + .realbits = 64, + .storagebits = 64, + .endianness = IIO_CPU, + }, + }, IIO_CHAN_SOFT_TIMESTAMP(BU27008_NUM_CHANS), }; @@ -1004,6 +1021,169 @@ static int bu27008_read_one(struct bu27008_data *data, struct iio_dev *idev, return ret; } +#define BU27008_LUX_DATA_RED 0 +#define BU27008_LUX_DATA_GREEN 1 +#define BU27008_LUX_DATA_BLUE 2 +#define BU27008_LUX_DATA_IR 3 +#define LUX_DATA_SIZE (BU27008_NUM_HW_CHANS * sizeof(__le16)) + +static int bu27008_read_lux_chans(struct bu27008_data *data, unsigned int time, + __le16 *chan_data) +{ + int ret, chan_sel, tmpret, valid; + + chan_sel = BU27008_BLUE2_IR3 << (ffs(data->cd->chan_sel_mask) - 1); + + ret = regmap_update_bits(data->regmap, data->cd->chan_sel_reg, + data->cd->chan_sel_mask, chan_sel); + if (ret) + return ret; + + ret = bu27008_meas_set(data, true); + if (ret) + return ret; + + msleep(time / USEC_PER_MSEC); + + ret = regmap_read_poll_timeout(data->regmap, data->cd->valid_reg, + valid, (valid & BU27008_MASK_VALID), + BU27008_VALID_RESULT_WAIT_QUANTA_US, + BU27008_MAX_VALID_RESULT_WAIT_US); + if (ret) + goto out; + + ret = regmap_bulk_read(data->regmap, BU27008_REG_DATA0_LO, chan_data, + LUX_DATA_SIZE); + if (ret) + goto out; +out: + tmpret = bu27008_meas_set(data, false); + if (tmpret) + dev_warn(data->dev, "Stopping measurement failed\n"); + + return ret; +} + +/* + * Following equation for computing lux out of register values was given by + * ROHM HW colleagues; + * + * Red = RedData*1024 / Gain * 20 / meas_mode + * Green = GreenData* 1024 / Gain * 20 / meas_mode + * Blue = BlueData* 1024 / Gain * 20 / meas_mode + * IR = IrData* 1024 / Gain * 20 / meas_mode + * + * where meas_mode is the integration time in mS / 10 + * + * IRratio = (IR > 0.18 * Green) ? 0 : 1 + * + * Lx = max(c1*Red + c2*Green + c3*Blue,0) + * + * for + * IRratio 0: c1 = -0.00002237, c2 = 0.0003219, c3 = -0.000120371 + * IRratio 1: c1 = -0.00001074, c2 = 0.000305415, c3 = -0.000129367 + */ + +/* + * The max chan data is 0xffff. When we multiply it by 1024 * 20, we'll get + * 0x4FFFB000 which still fits in 32-bit integer. This won't overflow. + */ +#define NORM_CHAN_DATA_FOR_LX_CALC(chan, gain, time) (le16_to_cpu(chan) * \ + 1024 * 20 / (gain) / (time)) +static u64 bu27008_calc_nlux(struct bu27008_data *data, __le16 *lux_data, + unsigned int gain, unsigned int gain_ir, unsigned int time) +{ + unsigned int red, green, blue, ir; + s64 c1, c2, c3, nlux; + + time /= 10000; + ir = NORM_CHAN_DATA_FOR_LX_CALC(lux_data[BU27008_LUX_DATA_IR], gain_ir, time); + red = NORM_CHAN_DATA_FOR_LX_CALC(lux_data[BU27008_LUX_DATA_RED], gain, time); + green = NORM_CHAN_DATA_FOR_LX_CALC(lux_data[BU27008_LUX_DATA_GREEN], gain, time); + blue = NORM_CHAN_DATA_FOR_LX_CALC(lux_data[BU27008_LUX_DATA_BLUE], gain, time); + + if ((u64)ir * 100LLU > (u64)green * 18LLU) { + c1 = -22370; + c2 = 321900; + c3 = -120371; + } else { + c1 = -10740; + c2 = 305415; + c3 = -129367; + } + nlux = c1 * red + c2 * green + c3 * blue; + + return max_t(s64, 0, nlux); +} + +static int bu27008_get_time_n_gains(struct bu27008_data *data, + unsigned int *gain, unsigned int *gain_ir, unsigned int *time) +{ + int ret; + + ret = bu27008_get_gain(data, &data->gts, gain); + if (ret < 0) + return ret; + + ret = bu27008_get_gain(data, &data->gts_ir, gain_ir); + if (ret < 0) + return ret; + + ret = bu27008_get_int_time_us(data); + if (ret < 0) + return ret; + + /* Max integration time is 400000. Fits in signed int. */ + *time = ret; + + return 0; +} + +struct bu27008_buf { + __le16 chan[BU27008_NUM_HW_CHANS]; + u64 lux __aligned(8); + s64 ts __aligned(8); +}; + +static int bu27008_buffer_fill_lux(struct bu27008_data *data, + struct bu27008_buf *raw) +{ + unsigned int gain, gain_ir, time; + int ret; + + ret = bu27008_get_time_n_gains(data, &gain, &gain_ir, &time); + if (ret) + return ret; + + raw->lux = bu27008_calc_nlux(data, raw->chan, gain, gain_ir, time); + + return 0; +} + +static int bu27008_read_lux(struct bu27008_data *data, struct iio_dev *idev, + struct iio_chan_spec const *chan, + int *val, int *val2) +{ + __le16 lux_data[BU27008_NUM_HW_CHANS]; + unsigned int gain, gain_ir, time; + u64 nlux; + int ret; + + ret = bu27008_get_time_n_gains(data, &gain, &gain_ir, &time); + if (ret) + return ret; + + ret = bu27008_read_lux_chans(data, time, lux_data); + if (ret) + return ret; + + nlux = bu27008_calc_nlux(data, lux_data, gain, gain_ir, time); + *val = (int)nlux; + *val2 = nlux >> 32LLU; + + return IIO_VAL_INT_64; +} + static int bu27008_read_raw(struct iio_dev *idev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -1018,7 +1198,10 @@ static int bu27008_read_raw(struct iio_dev *idev, return -EBUSY; mutex_lock(&data->mutex); - ret = bu27008_read_one(data, idev, chan, val, val2); + if (chan->type == IIO_LIGHT) + ret = bu27008_read_lux(data, idev, chan, val, val2); + else + ret = bu27008_read_one(data, idev, chan, val, val2); mutex_unlock(&data->mutex); iio_device_release_direct_mode(idev); @@ -1026,6 +1209,11 @@ static int bu27008_read_raw(struct iio_dev *idev, return ret; case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_LIGHT) { + *val = 0; + *val2 = 1; + return IIO_VAL_INT_PLUS_NANO; + } ret = bu27008_get_scale(data, chan->scan_index == BU27008_IR, val, val2); if (ret) @@ -1236,10 +1424,7 @@ static irqreturn_t bu27008_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *idev = pf->indio_dev; struct bu27008_data *data = iio_priv(idev); - struct { - __le16 chan[BU27008_NUM_HW_CHANS]; - s64 ts __aligned(8); - } raw; + struct bu27008_buf raw; int ret, dummy; memset(&raw, 0, sizeof(raw)); @@ -1257,6 +1442,12 @@ static irqreturn_t bu27008_trigger_handler(int irq, void *p) if (ret < 0) goto err_read; + if (test_bit(BU27008_LUX, idev->active_scan_mask)) { + ret = bu27008_buffer_fill_lux(data, &raw); + if (ret) + goto err_read; + } + iio_push_to_buffers_with_timestamp(idev, &raw, pf->timestamp); err_read: iio_trigger_notify_done(idev->trig); diff --git a/drivers/iio/light/veml6075.c b/drivers/iio/light/veml6075.c new file mode 100644 index 0000000000..05d4c0e901 --- /dev/null +++ b/drivers/iio/light/veml6075.c @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Vishay VEML6075 UVA and UVB light sensor + * + * Copyright 2023 Javier Carrasco + * + * 7-bit I2C slave, address 0x10 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define VEML6075_CMD_CONF 0x00 /* configuration register */ +#define VEML6075_CMD_UVA 0x07 /* UVA channel */ +#define VEML6075_CMD_UVB 0x09 /* UVB channel */ +#define VEML6075_CMD_COMP1 0x0A /* visible light compensation */ +#define VEML6075_CMD_COMP2 0x0B /* infrarred light compensation */ +#define VEML6075_CMD_ID 0x0C /* device ID */ + +#define VEML6075_CONF_IT GENMASK(6, 4) /* intregration time */ +#define VEML6075_CONF_HD BIT(3) /* dynamic setting */ +#define VEML6075_CONF_TRIG BIT(2) /* trigger */ +#define VEML6075_CONF_AF BIT(1) /* active force enable */ +#define VEML6075_CONF_SD BIT(0) /* shutdown */ + +#define VEML6075_IT_50_MS 0x00 +#define VEML6075_IT_100_MS 0x01 +#define VEML6075_IT_200_MS 0x02 +#define VEML6075_IT_400_MS 0x03 +#define VEML6075_IT_800_MS 0x04 + +#define VEML6075_AF_DISABLE 0x00 +#define VEML6075_AF_ENABLE 0x01 + +#define VEML6075_SD_DISABLE 0x00 +#define VEML6075_SD_ENABLE 0x01 + +/* Open-air coefficients and responsivity */ +#define VEML6075_A_COEF 2220 +#define VEML6075_B_COEF 1330 +#define VEML6075_C_COEF 2950 +#define VEML6075_D_COEF 1740 +#define VEML6075_UVA_RESP 1461 +#define VEML6075_UVB_RESP 2591 + +static const int veml6075_it_ms[] = { 50, 100, 200, 400, 800 }; + +struct veml6075_data { + struct i2c_client *client; + struct regmap *regmap; + /* + * prevent integration time modification and triggering + * measurements while a measurement is underway. + */ + struct mutex lock; +}; + +/* channel number */ +enum veml6075_chan { + CH_UVA, + CH_UVB, +}; + +static const struct iio_chan_spec veml6075_channels[] = { + { + .type = IIO_INTENSITY, + .channel = CH_UVA, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_UVA, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), + }, + { + .type = IIO_INTENSITY, + .channel = CH_UVB, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_UVB, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), + }, + { + .type = IIO_UVINDEX, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), + }, +}; + +static int veml6075_request_measurement(struct veml6075_data *data) +{ + int ret, conf, int_time; + + ret = regmap_read(data->regmap, VEML6075_CMD_CONF, &conf); + if (ret < 0) + return ret; + + /* disable shutdown and trigger measurement */ + ret = regmap_write(data->regmap, VEML6075_CMD_CONF, + (conf | VEML6075_CONF_TRIG) & ~VEML6075_CONF_SD); + if (ret < 0) + return ret; + + /* + * A measurement requires between 1.30 and 1.40 times the integration + * time for all possible configurations. Using a 1.50 factor simplifies + * operations and ensures reliability under all circumstances. + */ + int_time = veml6075_it_ms[FIELD_GET(VEML6075_CONF_IT, conf)]; + msleep(int_time + (int_time / 2)); + + /* shutdown again, data registers are still accessible */ + return regmap_update_bits(data->regmap, VEML6075_CMD_CONF, + VEML6075_CONF_SD, VEML6075_CONF_SD); +} + +static int veml6075_uva_comp(int raw_uva, int comp1, int comp2) +{ + int comp1a_c, comp2a_c, uva_comp; + + comp1a_c = (comp1 * VEML6075_A_COEF) / 1000U; + comp2a_c = (comp2 * VEML6075_B_COEF) / 1000U; + uva_comp = raw_uva - comp1a_c - comp2a_c; + + return clamp_val(uva_comp, 0, U16_MAX); +} + +static int veml6075_uvb_comp(int raw_uvb, int comp1, int comp2) +{ + int comp1b_c, comp2b_c, uvb_comp; + + comp1b_c = (comp1 * VEML6075_C_COEF) / 1000U; + comp2b_c = (comp2 * VEML6075_D_COEF) / 1000U; + uvb_comp = raw_uvb - comp1b_c - comp2b_c; + + return clamp_val(uvb_comp, 0, U16_MAX); +} + +static int veml6075_read_comp(struct veml6075_data *data, int *c1, int *c2) +{ + int ret; + + ret = regmap_read(data->regmap, VEML6075_CMD_COMP1, c1); + if (ret < 0) + return ret; + + return regmap_read(data->regmap, VEML6075_CMD_COMP2, c2); +} + +static int veml6075_read_uv_direct(struct veml6075_data *data, int chan, + int *val) +{ + int c1, c2, ret; + + guard(mutex)(&data->lock); + + ret = veml6075_request_measurement(data); + if (ret < 0) + return ret; + + ret = veml6075_read_comp(data, &c1, &c2); + if (ret < 0) + return ret; + + switch (chan) { + case CH_UVA: + ret = regmap_read(data->regmap, VEML6075_CMD_UVA, val); + if (ret < 0) + return ret; + + *val = veml6075_uva_comp(*val, c1, c2); + return IIO_VAL_INT; + case CH_UVB: + ret = regmap_read(data->regmap, VEML6075_CMD_UVB, val); + if (ret < 0) + return ret; + + *val = veml6075_uvb_comp(*val, c1, c2); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int veml6075_read_int_time_index(struct veml6075_data *data) +{ + int ret, conf; + + ret = regmap_read(data->regmap, VEML6075_CMD_CONF, &conf); + if (ret < 0) + return ret; + + return FIELD_GET(VEML6075_CONF_IT, conf); +} + +static int veml6075_read_int_time_ms(struct veml6075_data *data, int *val) +{ + int int_index; + + guard(mutex)(&data->lock); + int_index = veml6075_read_int_time_index(data); + if (int_index < 0) + return int_index; + + *val = veml6075_it_ms[int_index]; + + return IIO_VAL_INT; +} + +static int veml6075_get_uvi_micro(struct veml6075_data *data, int uva_comp, + int uvb_comp) +{ + int uvia_micro = uva_comp * VEML6075_UVA_RESP; + int uvib_micro = uvb_comp * VEML6075_UVB_RESP; + int int_index; + + int_index = veml6075_read_int_time_index(data); + if (int_index < 0) + return int_index; + + switch (int_index) { + case VEML6075_IT_50_MS: + return uvia_micro + uvib_micro; + case VEML6075_IT_100_MS: + case VEML6075_IT_200_MS: + case VEML6075_IT_400_MS: + case VEML6075_IT_800_MS: + return (uvia_micro + uvib_micro) / (2 << int_index); + default: + return -EINVAL; + } +} + +static int veml6075_read_uvi(struct veml6075_data *data, int *val, int *val2) +{ + int ret, c1, c2, uva, uvb, uvi_micro; + + guard(mutex)(&data->lock); + + ret = veml6075_request_measurement(data); + if (ret < 0) + return ret; + + ret = veml6075_read_comp(data, &c1, &c2); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, VEML6075_CMD_UVA, &uva); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, VEML6075_CMD_UVB, &uvb); + if (ret < 0) + return ret; + + uvi_micro = veml6075_get_uvi_micro(data, veml6075_uva_comp(uva, c1, c2), + veml6075_uvb_comp(uvb, c1, c2)); + if (uvi_micro < 0) + return uvi_micro; + + *val = uvi_micro / MICRO; + *val2 = uvi_micro % MICRO; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int veml6075_read_responsivity(int chan, int *val, int *val2) +{ + /* scale = 1 / resp */ + switch (chan) { + case CH_UVA: + /* resp = 0.93 c/uW/cm2: scale = 1.75268817 */ + *val = 1; + *val2 = 75268817; + return IIO_VAL_INT_PLUS_NANO; + case CH_UVB: + /* resp = 2.1 c/uW/cm2: scale = 0.476190476 */ + *val = 0; + *val2 = 476190476; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static int veml6075_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + *length = ARRAY_SIZE(veml6075_it_ms); + *vals = veml6075_it_ms; + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; + + default: + return -EINVAL; + } +} + +static int veml6075_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct veml6075_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return veml6075_read_uv_direct(data, chan->channel, val); + case IIO_CHAN_INFO_PROCESSED: + return veml6075_read_uvi(data, val, val2); + case IIO_CHAN_INFO_INT_TIME: + return veml6075_read_int_time_ms(data, val); + case IIO_CHAN_INFO_SCALE: + return veml6075_read_responsivity(chan->channel, val, val2); + default: + return -EINVAL; + } +} + +static int veml6075_write_int_time_ms(struct veml6075_data *data, int val) +{ + int i = ARRAY_SIZE(veml6075_it_ms); + + guard(mutex)(&data->lock); + + while (i-- > 0) { + if (val == veml6075_it_ms[i]) + break; + } + if (i < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, VEML6075_CMD_CONF, + VEML6075_CONF_IT, + FIELD_PREP(VEML6075_CONF_IT, i)); +} + +static int veml6075_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct veml6075_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + return veml6075_write_int_time_ms(data, val); + default: + return -EINVAL; + } +} + +static const struct iio_info veml6075_info = { + .read_avail = veml6075_read_avail, + .read_raw = veml6075_read_raw, + .write_raw = veml6075_write_raw, +}; + +static bool veml6075_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case VEML6075_CMD_CONF: + case VEML6075_CMD_UVA: + case VEML6075_CMD_UVB: + case VEML6075_CMD_COMP1: + case VEML6075_CMD_COMP2: + case VEML6075_CMD_ID: + return true; + default: + return false; + } +} + +static bool veml6075_writable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case VEML6075_CMD_CONF: + return true; + default: + return false; + } +} + +static const struct regmap_config veml6075_regmap_config = { + .name = "veml6075", + .reg_bits = 8, + .val_bits = 16, + .max_register = VEML6075_CMD_ID, + .readable_reg = veml6075_readable_reg, + .writeable_reg = veml6075_writable_reg, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int veml6075_probe(struct i2c_client *client) +{ + struct veml6075_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + int config, ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + regmap = devm_regmap_init_i2c(client, &veml6075_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + data = iio_priv(indio_dev); + data->client = client; + data->regmap = regmap; + + mutex_init(&data->lock); + + indio_dev->name = "veml6075"; + indio_dev->info = &veml6075_info; + indio_dev->channels = veml6075_channels; + indio_dev->num_channels = ARRAY_SIZE(veml6075_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = devm_regulator_get_enable(&client->dev, "vdd"); + if (ret < 0) + return ret; + + /* default: 100ms integration time, active force enable, shutdown */ + config = FIELD_PREP(VEML6075_CONF_IT, VEML6075_IT_100_MS) | + FIELD_PREP(VEML6075_CONF_AF, VEML6075_AF_ENABLE) | + FIELD_PREP(VEML6075_CONF_SD, VEML6075_SD_ENABLE); + ret = regmap_write(data->regmap, VEML6075_CMD_CONF, config); + if (ret < 0) + return ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id veml6075_id[] = { + { "veml6075" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, veml6075_id); + +static const struct of_device_id veml6075_of_match[] = { + { .compatible = "vishay,veml6075" }, + {} +}; +MODULE_DEVICE_TABLE(of, veml6075_of_match); + +static struct i2c_driver veml6075_driver = { + .driver = { + .name = "veml6075", + .of_match_table = veml6075_of_match, + }, + .probe = veml6075_probe, + .id_table = veml6075_id, +}; + +module_i2c_driver(veml6075_driver); + +MODULE_AUTHOR("Javier Carrasco "); +MODULE_DESCRIPTION("Vishay VEML6075 UVA and UVB light sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/tmag5273.c b/drivers/iio/magnetometer/tmag5273.c index e8c4ca142d..218b1ce076 100644 --- a/drivers/iio/magnetometer/tmag5273.c +++ b/drivers/iio/magnetometer/tmag5273.c @@ -497,17 +497,13 @@ static int tmag5273_set_operating_mode(struct tmag5273_data *data, static void tmag5273_read_device_property(struct tmag5273_data *data) { struct device *dev = data->dev; - const char *str; int ret; data->angle_measurement = TMAG5273_ANGLE_EN_X_Y; - ret = device_property_read_string(dev, "ti,angle-measurement", &str); - if (ret) - return; - - ret = match_string(tmag5273_angle_names, - ARRAY_SIZE(tmag5273_angle_names), str); + ret = device_property_match_property_string(dev, "ti,angle-measurement", + tmag5273_angle_names, + ARRAY_SIZE(tmag5273_angle_names)); if (ret >= 0) data->angle_measurement = ret; } diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 95efa32e42..79adfd059c 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -109,6 +109,28 @@ config HP03 To compile this driver as a module, choose M here: the module will be called hp03. +config HSC030PA + tristate "Honeywell HSC/SSC TruStability pressure sensor series" + depends on (I2C || SPI_MASTER) + select HSC030PA_I2C if I2C + select HSC030PA_SPI if SPI_MASTER + help + Say Y here to build support for the Honeywell TruStability + HSC and SSC pressure and temperature sensor series. + + To compile this driver as a module, choose M here: the module + will be called hsc030pa. + +config HSC030PA_I2C + tristate + depends on HSC030PA + depends on I2C + +config HSC030PA_SPI + tristate + depends on HSC030PA + depends on SPI_MASTER + config ICP10100 tristate "InvenSense ICP-101xx pressure and temperature sensor" depends on I2C diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 436aec7e65..b0f8b94662 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -15,6 +15,9 @@ obj-$(CONFIG_DPS310) += dps310.o obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_HP03) += hp03.o +obj-$(CONFIG_HSC030PA) += hsc030pa.o +obj-$(CONFIG_HSC030PA_I2C) += hsc030pa_i2c.o +obj-$(CONFIG_HSC030PA_SPI) += hsc030pa_spi.o obj-$(CONFIG_ICP10100) += icp10100.o obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index a2ef1373a2..fe8734468e 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -13,6 +13,7 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * * Notice: @@ -794,10 +795,12 @@ static int bmp280_chip_config(struct bmp280_data *data) } static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; +static const u8 bmp280_chip_ids[] = { BMP280_CHIP_ID }; const struct bmp280_chip_info bmp280_chip_info = { .id_reg = BMP280_REG_ID, - .chip_id = BMP280_CHIP_ID, + .chip_id = bmp280_chip_ids, + .num_chip_id = ARRAY_SIZE(bmp280_chip_ids), .regmap_config = &bmp280_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, @@ -846,9 +849,12 @@ static int bme280_chip_config(struct bmp280_data *data) return bmp280_chip_config(data); } +static const u8 bme280_chip_ids[] = { BME280_CHIP_ID }; + const struct bmp280_chip_info bme280_chip_info = { .id_reg = BMP280_REG_ID, - .chip_id = BME280_CHIP_ID, + .chip_id = bme280_chip_ids, + .num_chip_id = ARRAY_SIZE(bme280_chip_ids), .regmap_config = &bmp280_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, @@ -920,7 +926,7 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd) } /* - * Returns temperature in Celsius dregrees, resolution is 0.01º C. Output value of + * Returns temperature in Celsius degrees, resolution is 0.01º C. Output value of * "5123" equals 51.2º C. t_fine carries fine temperature as global value. * * Taken from datasheet, Section Appendix 9, "Compensation formula" and repo @@ -1220,10 +1226,12 @@ static int bmp380_chip_config(struct bmp280_data *data) static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; +static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID }; const struct bmp280_chip_info bmp380_chip_info = { .id_reg = BMP380_REG_ID, - .chip_id = BMP380_CHIP_ID, + .chip_id = bmp380_chip_ids, + .num_chip_id = ARRAY_SIZE(bmp380_chip_ids), .regmap_config = &bmp380_regmap_config, .start_up_time = 2000, .channels = bmp380_channels, @@ -1385,7 +1393,7 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) /* * Temperature is returned in Celsius degrees in fractional - * form down 2^16. We reescale by x1000 to return milli Celsius + * form down 2^16. We rescale by x1000 to return milli Celsius * to respect IIO ABI. */ *val = raw_temp * 1000; @@ -1412,7 +1420,7 @@ static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) } /* * Pressure is returned in Pascals in fractional form down 2^16. - * We reescale /1000 to convert to kilopascal to respect IIO ABI. + * We rescale /1000 to convert to kilopascal to respect IIO ABI. */ *val = raw_press; *val2 = 64000; /* 2^6 * 1000 */ @@ -1720,10 +1728,12 @@ static int bmp580_chip_config(struct bmp280_data *data) } static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; +static const u8 bmp580_chip_ids[] = { BMP580_CHIP_ID, BMP580_CHIP_ID_ALT }; const struct bmp280_chip_info bmp580_chip_info = { .id_reg = BMP580_REG_CHIP_ID, - .chip_id = BMP580_CHIP_ID, + .chip_id = bmp580_chip_ids, + .num_chip_id = ARRAY_SIZE(bmp580_chip_ids), .regmap_config = &bmp580_regmap_config, .start_up_time = 2000, .channels = bmp380_channels, @@ -1983,10 +1993,12 @@ static int bmp180_chip_config(struct bmp280_data *data) static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; +static const u8 bmp180_chip_ids[] = { BMP180_CHIP_ID }; const struct bmp280_chip_info bmp180_chip_info = { .id_reg = BMP280_REG_ID, - .chip_id = BMP180_CHIP_ID, + .chip_id = bmp180_chip_ids, + .num_chip_id = ARRAY_SIZE(bmp180_chip_ids), .regmap_config = &bmp180_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, @@ -2077,6 +2089,7 @@ int bmp280_common_probe(struct device *dev, struct bmp280_data *data; struct gpio_desc *gpiod; unsigned int chip_id; + unsigned int i; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -2142,12 +2155,17 @@ int bmp280_common_probe(struct device *dev, ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id); if (ret < 0) return ret; - if (chip_id != data->chip_info->chip_id) { - dev_err(dev, "bad chip id: expected %x got %x\n", - data->chip_info->chip_id, chip_id); - return -EINVAL; + + for (i = 0; i < data->chip_info->num_chip_id; i++) { + if (chip_id == data->chip_info->chip_id[i]) { + dev_info(dev, "0x%x is a known chip id for %s\n", chip_id, name); + break; + } } + if (i == data->chip_info->num_chip_id) + dev_warn(dev, "bad chip id: 0x%x is not a known chip id\n", chip_id); + if (data->chip_info->preinit) { ret = data->chip_info->preinit(data); if (ret) diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index dbe630ad05..34e3bc7584 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -7,13 +7,11 @@ static int bmp280_i2c_probe(struct i2c_client *client) { - struct regmap *regmap; - const struct bmp280_chip_info *chip_info; const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct bmp280_chip_info *chip_info; + struct regmap *regmap; - chip_info = device_get_match_data(&client->dev); - if (!chip_info) - chip_info = (const struct bmp280_chip_info *) id->driver_data; + chip_info = i2c_get_match_data(client); regmap = devm_regmap_init_i2c(client, chip_info->regmap_config); if (IS_ERR(regmap)) { diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 967de99c1b..a444d4b297 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -4,6 +4,7 @@ * * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c */ +#include #include #include #include @@ -14,8 +15,7 @@ static int bmp280_regmap_spi_write(void *context, const void *data, size_t count) { - struct device *dev = context; - struct spi_device *spi = to_spi_device(dev); + struct spi_device *spi = to_spi_device(context); u8 buf[2]; memcpy(buf, data, 2); @@ -31,12 +31,39 @@ static int bmp280_regmap_spi_write(void *context, const void *data, static int bmp280_regmap_spi_read(void *context, const void *reg, size_t reg_size, void *val, size_t val_size) { - struct device *dev = context; - struct spi_device *spi = to_spi_device(dev); + struct spi_device *spi = to_spi_device(context); return spi_write_then_read(spi, reg, reg_size, val, val_size); } +static int bmp380_regmap_spi_read(void *context, const void *reg, + size_t reg_size, void *val, size_t val_size) +{ + struct spi_device *spi = to_spi_device(context); + u8 rx_buf[4]; + ssize_t status; + + /* + * Maximum number of consecutive bytes read for a temperature or + * pressure measurement is 3. + */ + if (val_size > 3) + return -EINVAL; + + /* + * According to the BMP3xx datasheets, for a basic SPI read opertion, + * the first byte needs to be dropped and the rest are the requested + * data. + */ + status = spi_write_then_read(spi, reg, 1, rx_buf, val_size + 1); + if (status) + return status; + + memcpy(val, rx_buf + 1, val_size); + + return 0; +} + static struct regmap_bus bmp280_regmap_bus = { .write = bmp280_regmap_spi_write, .read = bmp280_regmap_spi_read, @@ -44,10 +71,19 @@ static struct regmap_bus bmp280_regmap_bus = { .val_format_endian_default = REGMAP_ENDIAN_BIG, }; +static struct regmap_bus bmp380_regmap_bus = { + .write = bmp280_regmap_spi_write, + .read = bmp380_regmap_spi_read, + .read_flag_mask = BIT(7), + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + static int bmp280_spi_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); const struct bmp280_chip_info *chip_info; + struct regmap_bus *bmp_regmap_bus; struct regmap *regmap; int ret; @@ -58,12 +94,20 @@ static int bmp280_spi_probe(struct spi_device *spi) return ret; } - chip_info = device_get_match_data(&spi->dev); - if (!chip_info) - chip_info = (const struct bmp280_chip_info *) id->driver_data; + chip_info = spi_get_device_match_data(spi); + + switch (chip_info->chip_id[0]) { + case BMP380_CHIP_ID: + case BMP390_CHIP_ID: + bmp_regmap_bus = &bmp380_regmap_bus; + break; + default: + bmp_regmap_bus = &bmp280_regmap_bus; + break; + } regmap = devm_regmap_init(&spi->dev, - &bmp280_regmap_bus, + bmp_regmap_bus, &spi->dev, chip_info->regmap_config); if (IS_ERR(regmap)) { diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 5c0563ce75..4012387d79 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -292,6 +292,7 @@ #define BMP580_CHIP_ID_ALT 0x51 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 +#define BMP390_CHIP_ID 0x60 #define BME280_CHIP_ID 0x60 #define BMP280_SOFT_RESET_VAL 0xB6 @@ -410,7 +411,7 @@ struct bmp280_data { __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; - /* Miscellaneous, endianess-aware data buffers */ + /* Miscellaneous, endianness-aware data buffers */ __le16 le16; __be16 be16; } __aligned(IIO_DMA_MINALIGN); @@ -418,7 +419,8 @@ struct bmp280_data { struct bmp280_chip_info { unsigned int id_reg; - const unsigned int chip_id; + const u8 *chip_id; + int num_chip_id; const struct regmap_config *regmap_config; diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c index 28c8269ba6..0bba4c5a8d 100644 --- a/drivers/iio/pressure/dlhl60d.c +++ b/drivers/iio/pressure/dlhl60d.c @@ -250,18 +250,17 @@ static irqreturn_t dlh_trigger_handler(int irq, void *private) struct dlh_state *st = iio_priv(indio_dev); int ret; unsigned int chn, i = 0; - __be32 tmp_buf[2]; + __be32 tmp_buf[2] = { }; ret = dlh_start_capture_and_read(st); if (ret) goto out; for_each_set_bit(chn, indio_dev->active_scan_mask, - indio_dev->masklength) { - memcpy(tmp_buf + i, + indio_dev->masklength) { + memcpy(&tmp_buf[i++], &st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES, DLH_NUM_DATA_BYTES); - i++; } iio_push_to_buffers(indio_dev, tmp_buf); diff --git a/drivers/iio/pressure/hsc030pa.c b/drivers/iio/pressure/hsc030pa.c new file mode 100644 index 0000000000..d6a51f0c33 --- /dev/null +++ b/drivers/iio/pressure/hsc030pa.c @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Honeywell TruStability HSC Series pressure/temperature sensor + * + * Copyright (c) 2023 Petre Rodan + * + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include "hsc030pa.h" + +/* + * HSC_PRESSURE_TRIPLET_LEN - length for the string that defines the + * pressure range, measurement unit and type as per the part nomenclature. + * Consult honeywell,pressure-triplet in the bindings file for details. + */ +#define HSC_PRESSURE_TRIPLET_LEN 6 +#define HSC_STATUS_MASK GENMASK(7, 6) +#define HSC_TEMPERATURE_MASK GENMASK(15, 5) +#define HSC_PRESSURE_MASK GENMASK(29, 16) + +struct hsc_func_spec { + u32 output_min; + u32 output_max; +}; + +/* + * function A: 10% - 90% of 2^14 + * function B: 5% - 95% of 2^14 + * function C: 5% - 85% of 2^14 + * function F: 4% - 94% of 2^14 + */ +static const struct hsc_func_spec hsc_func_spec[] = { + [HSC_FUNCTION_A] = { .output_min = 1638, .output_max = 14746 }, + [HSC_FUNCTION_B] = { .output_min = 819, .output_max = 15565 }, + [HSC_FUNCTION_C] = { .output_min = 819, .output_max = 13926 }, + [HSC_FUNCTION_F] = { .output_min = 655, .output_max = 15401 }, +}; + +enum hsc_variants { + HSC001BA = 0x00, HSC1_6BA = 0x01, HSC2_5BA = 0x02, HSC004BA = 0x03, + HSC006BA = 0x04, HSC010BA = 0x05, HSC1_6MD = 0x06, HSC2_5MD = 0x07, + HSC004MD = 0x08, HSC006MD = 0x09, HSC010MD = 0x0a, HSC016MD = 0x0b, + HSC025MD = 0x0c, HSC040MD = 0x0d, HSC060MD = 0x0e, HSC100MD = 0x0f, + HSC160MD = 0x10, HSC250MD = 0x11, HSC400MD = 0x12, HSC600MD = 0x13, + HSC001BD = 0x14, HSC1_6BD = 0x15, HSC2_5BD = 0x16, HSC004BD = 0x17, + HSC2_5MG = 0x18, HSC004MG = 0x19, HSC006MG = 0x1a, HSC010MG = 0x1b, + HSC016MG = 0x1c, HSC025MG = 0x1d, HSC040MG = 0x1e, HSC060MG = 0x1f, + HSC100MG = 0x20, HSC160MG = 0x21, HSC250MG = 0x22, HSC400MG = 0x23, + HSC600MG = 0x24, HSC001BG = 0x25, HSC1_6BG = 0x26, HSC2_5BG = 0x27, + HSC004BG = 0x28, HSC006BG = 0x29, HSC010BG = 0x2a, HSC100KA = 0x2b, + HSC160KA = 0x2c, HSC250KA = 0x2d, HSC400KA = 0x2e, HSC600KA = 0x2f, + HSC001GA = 0x30, HSC160LD = 0x31, HSC250LD = 0x32, HSC400LD = 0x33, + HSC600LD = 0x34, HSC001KD = 0x35, HSC1_6KD = 0x36, HSC2_5KD = 0x37, + HSC004KD = 0x38, HSC006KD = 0x39, HSC010KD = 0x3a, HSC016KD = 0x3b, + HSC025KD = 0x3c, HSC040KD = 0x3d, HSC060KD = 0x3e, HSC100KD = 0x3f, + HSC160KD = 0x40, HSC250KD = 0x41, HSC400KD = 0x42, HSC250LG = 0x43, + HSC400LG = 0x44, HSC600LG = 0x45, HSC001KG = 0x46, HSC1_6KG = 0x47, + HSC2_5KG = 0x48, HSC004KG = 0x49, HSC006KG = 0x4a, HSC010KG = 0x4b, + HSC016KG = 0x4c, HSC025KG = 0x4d, HSC040KG = 0x4e, HSC060KG = 0x4f, + HSC100KG = 0x50, HSC160KG = 0x51, HSC250KG = 0x52, HSC400KG = 0x53, + HSC600KG = 0x54, HSC001GG = 0x55, HSC015PA = 0x56, HSC030PA = 0x57, + HSC060PA = 0x58, HSC100PA = 0x59, HSC150PA = 0x5a, HSC0_5ND = 0x5b, + HSC001ND = 0x5c, HSC002ND = 0x5d, HSC004ND = 0x5e, HSC005ND = 0x5f, + HSC010ND = 0x60, HSC020ND = 0x61, HSC030ND = 0x62, HSC001PD = 0x63, + HSC005PD = 0x64, HSC015PD = 0x65, HSC030PD = 0x66, HSC060PD = 0x67, + HSC001NG = 0x68, HSC002NG = 0x69, HSC004NG = 0x6a, HSC005NG = 0x6b, + HSC010NG = 0x6c, HSC020NG = 0x6d, HSC030NG = 0x6e, HSC001PG = 0x6f, + HSC005PG = 0x70, HSC015PG = 0x71, HSC030PG = 0x72, HSC060PG = 0x73, + HSC100PG = 0x74, HSC150PG = 0x75, HSC_VARIANTS_MAX +}; + +static const char * const hsc_triplet_variants[HSC_VARIANTS_MAX] = { + [HSC001BA] = "001BA", [HSC1_6BA] = "1.6BA", [HSC2_5BA] = "2.5BA", + [HSC004BA] = "004BA", [HSC006BA] = "006BA", [HSC010BA] = "010BA", + [HSC1_6MD] = "1.6MD", [HSC2_5MD] = "2.5MD", [HSC004MD] = "004MD", + [HSC006MD] = "006MD", [HSC010MD] = "010MD", [HSC016MD] = "016MD", + [HSC025MD] = "025MD", [HSC040MD] = "040MD", [HSC060MD] = "060MD", + [HSC100MD] = "100MD", [HSC160MD] = "160MD", [HSC250MD] = "250MD", + [HSC400MD] = "400MD", [HSC600MD] = "600MD", [HSC001BD] = "001BD", + [HSC1_6BD] = "1.6BD", [HSC2_5BD] = "2.5BD", [HSC004BD] = "004BD", + [HSC2_5MG] = "2.5MG", [HSC004MG] = "004MG", [HSC006MG] = "006MG", + [HSC010MG] = "010MG", [HSC016MG] = "016MG", [HSC025MG] = "025MG", + [HSC040MG] = "040MG", [HSC060MG] = "060MG", [HSC100MG] = "100MG", + [HSC160MG] = "160MG", [HSC250MG] = "250MG", [HSC400MG] = "400MG", + [HSC600MG] = "600MG", [HSC001BG] = "001BG", [HSC1_6BG] = "1.6BG", + [HSC2_5BG] = "2.5BG", [HSC004BG] = "004BG", [HSC006BG] = "006BG", + [HSC010BG] = "010BG", [HSC100KA] = "100KA", [HSC160KA] = "160KA", + [HSC250KA] = "250KA", [HSC400KA] = "400KA", [HSC600KA] = "600KA", + [HSC001GA] = "001GA", [HSC160LD] = "160LD", [HSC250LD] = "250LD", + [HSC400LD] = "400LD", [HSC600LD] = "600LD", [HSC001KD] = "001KD", + [HSC1_6KD] = "1.6KD", [HSC2_5KD] = "2.5KD", [HSC004KD] = "004KD", + [HSC006KD] = "006KD", [HSC010KD] = "010KD", [HSC016KD] = "016KD", + [HSC025KD] = "025KD", [HSC040KD] = "040KD", [HSC060KD] = "060KD", + [HSC100KD] = "100KD", [HSC160KD] = "160KD", [HSC250KD] = "250KD", + [HSC400KD] = "400KD", [HSC250LG] = "250LG", [HSC400LG] = "400LG", + [HSC600LG] = "600LG", [HSC001KG] = "001KG", [HSC1_6KG] = "1.6KG", + [HSC2_5KG] = "2.5KG", [HSC004KG] = "004KG", [HSC006KG] = "006KG", + [HSC010KG] = "010KG", [HSC016KG] = "016KG", [HSC025KG] = "025KG", + [HSC040KG] = "040KG", [HSC060KG] = "060KG", [HSC100KG] = "100KG", + [HSC160KG] = "160KG", [HSC250KG] = "250KG", [HSC400KG] = "400KG", + [HSC600KG] = "600KG", [HSC001GG] = "001GG", [HSC015PA] = "015PA", + [HSC030PA] = "030PA", [HSC060PA] = "060PA", [HSC100PA] = "100PA", + [HSC150PA] = "150PA", [HSC0_5ND] = "0.5ND", [HSC001ND] = "001ND", + [HSC002ND] = "002ND", [HSC004ND] = "004ND", [HSC005ND] = "005ND", + [HSC010ND] = "010ND", [HSC020ND] = "020ND", [HSC030ND] = "030ND", + [HSC001PD] = "001PD", [HSC005PD] = "005PD", [HSC015PD] = "015PD", + [HSC030PD] = "030PD", [HSC060PD] = "060PD", [HSC001NG] = "001NG", + [HSC002NG] = "002NG", [HSC004NG] = "004NG", [HSC005NG] = "005NG", + [HSC010NG] = "010NG", [HSC020NG] = "020NG", [HSC030NG] = "030NG", + [HSC001PG] = "001PG", [HSC005PG] = "005PG", [HSC015PG] = "015PG", + [HSC030PG] = "030PG", [HSC060PG] = "060PG", [HSC100PG] = "100PG", + [HSC150PG] = "150PG", +}; + +/** + * struct hsc_range_config - list of pressure ranges based on nomenclature + * @pmin: lowest pressure that can be measured + * @pmax: highest pressure that can be measured + */ +struct hsc_range_config { + const s32 pmin; + const s32 pmax; +}; + +/* All min max limits have been converted to pascals */ +static const struct hsc_range_config hsc_range_config[HSC_VARIANTS_MAX] = { + [HSC001BA] = { .pmin = 0, .pmax = 100000 }, + [HSC1_6BA] = { .pmin = 0, .pmax = 160000 }, + [HSC2_5BA] = { .pmin = 0, .pmax = 250000 }, + [HSC004BA] = { .pmin = 0, .pmax = 400000 }, + [HSC006BA] = { .pmin = 0, .pmax = 600000 }, + [HSC010BA] = { .pmin = 0, .pmax = 1000000 }, + [HSC1_6MD] = { .pmin = -160, .pmax = 160 }, + [HSC2_5MD] = { .pmin = -250, .pmax = 250 }, + [HSC004MD] = { .pmin = -400, .pmax = 400 }, + [HSC006MD] = { .pmin = -600, .pmax = 600 }, + [HSC010MD] = { .pmin = -1000, .pmax = 1000 }, + [HSC016MD] = { .pmin = -1600, .pmax = 1600 }, + [HSC025MD] = { .pmin = -2500, .pmax = 2500 }, + [HSC040MD] = { .pmin = -4000, .pmax = 4000 }, + [HSC060MD] = { .pmin = -6000, .pmax = 6000 }, + [HSC100MD] = { .pmin = -10000, .pmax = 10000 }, + [HSC160MD] = { .pmin = -16000, .pmax = 16000 }, + [HSC250MD] = { .pmin = -25000, .pmax = 25000 }, + [HSC400MD] = { .pmin = -40000, .pmax = 40000 }, + [HSC600MD] = { .pmin = -60000, .pmax = 60000 }, + [HSC001BD] = { .pmin = -100000, .pmax = 100000 }, + [HSC1_6BD] = { .pmin = -160000, .pmax = 160000 }, + [HSC2_5BD] = { .pmin = -250000, .pmax = 250000 }, + [HSC004BD] = { .pmin = -400000, .pmax = 400000 }, + [HSC2_5MG] = { .pmin = 0, .pmax = 250 }, + [HSC004MG] = { .pmin = 0, .pmax = 400 }, + [HSC006MG] = { .pmin = 0, .pmax = 600 }, + [HSC010MG] = { .pmin = 0, .pmax = 1000 }, + [HSC016MG] = { .pmin = 0, .pmax = 1600 }, + [HSC025MG] = { .pmin = 0, .pmax = 2500 }, + [HSC040MG] = { .pmin = 0, .pmax = 4000 }, + [HSC060MG] = { .pmin = 0, .pmax = 6000 }, + [HSC100MG] = { .pmin = 0, .pmax = 10000 }, + [HSC160MG] = { .pmin = 0, .pmax = 16000 }, + [HSC250MG] = { .pmin = 0, .pmax = 25000 }, + [HSC400MG] = { .pmin = 0, .pmax = 40000 }, + [HSC600MG] = { .pmin = 0, .pmax = 60000 }, + [HSC001BG] = { .pmin = 0, .pmax = 100000 }, + [HSC1_6BG] = { .pmin = 0, .pmax = 160000 }, + [HSC2_5BG] = { .pmin = 0, .pmax = 250000 }, + [HSC004BG] = { .pmin = 0, .pmax = 400000 }, + [HSC006BG] = { .pmin = 0, .pmax = 600000 }, + [HSC010BG] = { .pmin = 0, .pmax = 1000000 }, + [HSC100KA] = { .pmin = 0, .pmax = 100000 }, + [HSC160KA] = { .pmin = 0, .pmax = 160000 }, + [HSC250KA] = { .pmin = 0, .pmax = 250000 }, + [HSC400KA] = { .pmin = 0, .pmax = 400000 }, + [HSC600KA] = { .pmin = 0, .pmax = 600000 }, + [HSC001GA] = { .pmin = 0, .pmax = 1000000 }, + [HSC160LD] = { .pmin = -160, .pmax = 160 }, + [HSC250LD] = { .pmin = -250, .pmax = 250 }, + [HSC400LD] = { .pmin = -400, .pmax = 400 }, + [HSC600LD] = { .pmin = -600, .pmax = 600 }, + [HSC001KD] = { .pmin = -1000, .pmax = 1000 }, + [HSC1_6KD] = { .pmin = -1600, .pmax = 1600 }, + [HSC2_5KD] = { .pmin = -2500, .pmax = 2500 }, + [HSC004KD] = { .pmin = -4000, .pmax = 4000 }, + [HSC006KD] = { .pmin = -6000, .pmax = 6000 }, + [HSC010KD] = { .pmin = -10000, .pmax = 10000 }, + [HSC016KD] = { .pmin = -16000, .pmax = 16000 }, + [HSC025KD] = { .pmin = -25000, .pmax = 25000 }, + [HSC040KD] = { .pmin = -40000, .pmax = 40000 }, + [HSC060KD] = { .pmin = -60000, .pmax = 60000 }, + [HSC100KD] = { .pmin = -100000, .pmax = 100000 }, + [HSC160KD] = { .pmin = -160000, .pmax = 160000 }, + [HSC250KD] = { .pmin = -250000, .pmax = 250000 }, + [HSC400KD] = { .pmin = -400000, .pmax = 400000 }, + [HSC250LG] = { .pmin = 0, .pmax = 250 }, + [HSC400LG] = { .pmin = 0, .pmax = 400 }, + [HSC600LG] = { .pmin = 0, .pmax = 600 }, + [HSC001KG] = { .pmin = 0, .pmax = 1000 }, + [HSC1_6KG] = { .pmin = 0, .pmax = 1600 }, + [HSC2_5KG] = { .pmin = 0, .pmax = 2500 }, + [HSC004KG] = { .pmin = 0, .pmax = 4000 }, + [HSC006KG] = { .pmin = 0, .pmax = 6000 }, + [HSC010KG] = { .pmin = 0, .pmax = 10000 }, + [HSC016KG] = { .pmin = 0, .pmax = 16000 }, + [HSC025KG] = { .pmin = 0, .pmax = 25000 }, + [HSC040KG] = { .pmin = 0, .pmax = 40000 }, + [HSC060KG] = { .pmin = 0, .pmax = 60000 }, + [HSC100KG] = { .pmin = 0, .pmax = 100000 }, + [HSC160KG] = { .pmin = 0, .pmax = 160000 }, + [HSC250KG] = { .pmin = 0, .pmax = 250000 }, + [HSC400KG] = { .pmin = 0, .pmax = 400000 }, + [HSC600KG] = { .pmin = 0, .pmax = 600000 }, + [HSC001GG] = { .pmin = 0, .pmax = 1000000 }, + [HSC015PA] = { .pmin = 0, .pmax = 103421 }, + [HSC030PA] = { .pmin = 0, .pmax = 206843 }, + [HSC060PA] = { .pmin = 0, .pmax = 413685 }, + [HSC100PA] = { .pmin = 0, .pmax = 689476 }, + [HSC150PA] = { .pmin = 0, .pmax = 1034214 }, + [HSC0_5ND] = { .pmin = -125, .pmax = 125 }, + [HSC001ND] = { .pmin = -249, .pmax = 249 }, + [HSC002ND] = { .pmin = -498, .pmax = 498 }, + [HSC004ND] = { .pmin = -996, .pmax = 996 }, + [HSC005ND] = { .pmin = -1245, .pmax = 1245 }, + [HSC010ND] = { .pmin = -2491, .pmax = 2491 }, + [HSC020ND] = { .pmin = -4982, .pmax = 4982 }, + [HSC030ND] = { .pmin = -7473, .pmax = 7473 }, + [HSC001PD] = { .pmin = -6895, .pmax = 6895 }, + [HSC005PD] = { .pmin = -34474, .pmax = 34474 }, + [HSC015PD] = { .pmin = -103421, .pmax = 103421 }, + [HSC030PD] = { .pmin = -206843, .pmax = 206843 }, + [HSC060PD] = { .pmin = -413685, .pmax = 413685 }, + [HSC001NG] = { .pmin = 0, .pmax = 249 }, + [HSC002NG] = { .pmin = 0, .pmax = 498 }, + [HSC004NG] = { .pmin = 0, .pmax = 996 }, + [HSC005NG] = { .pmin = 0, .pmax = 1245 }, + [HSC010NG] = { .pmin = 0, .pmax = 2491 }, + [HSC020NG] = { .pmin = 0, .pmax = 4982 }, + [HSC030NG] = { .pmin = 0, .pmax = 7473 }, + [HSC001PG] = { .pmin = 0, .pmax = 6895 }, + [HSC005PG] = { .pmin = 0, .pmax = 34474 }, + [HSC015PG] = { .pmin = 0, .pmax = 103421 }, + [HSC030PG] = { .pmin = 0, .pmax = 206843 }, + [HSC060PG] = { .pmin = 0, .pmax = 413685 }, + [HSC100PG] = { .pmin = 0, .pmax = 689476 }, + [HSC150PG] = { .pmin = 0, .pmax = 1034214 }, +}; + +/** + * hsc_measurement_is_valid() - validate last conversion via status bits + * @data: structure containing instantiated sensor data + * Return: true only if both status bits are zero + * + * the two MSB from the first transfered byte contain a status code + * 00 - normal operation, valid data + * 01 - device in factory programming mode + * 10 - stale data + * 11 - diagnostic condition + */ +static bool hsc_measurement_is_valid(struct hsc_data *data) +{ + return !(data->buffer[0] & HSC_STATUS_MASK); +} + +static int hsc_get_measurement(struct hsc_data *data) +{ + const struct hsc_chip_data *chip = data->chip; + int ret; + + ret = data->recv_cb(data); + if (ret < 0) + return ret; + + data->is_valid = chip->valid(data); + if (!data->is_valid) + return -EAGAIN; + + return 0; +} + +/* + * IIO ABI expects + * value = (conv + offset) * scale + * + * datasheet provides the following formula for determining the temperature + * temp[C] = conv * a + b + * where a = 200/2047; b = -50 + * + * temp[C] = (conv + (b/a)) * a * (1000) + * => + * scale = a * 1000 = .097703957 * 1000 = 97.703957 + * offset = b/a = -50 / .097703957 = -50000000 / 97704 + * + * based on the datasheet + * pressure = (conv - Omin) * Q + Pmin = + * ((conv - Omin) + Pmin/Q) * Q + * => + * scale = Q = (Pmax - Pmin) / (Omax - Omin) + * offset = Pmin/Q - Omin = Pmin * (Omax - Omin) / (Pmax - Pmin) - Omin + */ +static int hsc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct hsc_data *data = iio_priv(indio_dev); + int ret; + u32 recvd; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = hsc_get_measurement(data); + if (ret) + return ret; + + recvd = get_unaligned_be32(data->buffer); + switch (channel->type) { + case IIO_PRESSURE: + *val = FIELD_GET(HSC_PRESSURE_MASK, recvd); + return IIO_VAL_INT; + case IIO_TEMP: + *val = FIELD_GET(HSC_TEMPERATURE_MASK, recvd); + return IIO_VAL_INT; + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SCALE: + switch (channel->type) { + case IIO_TEMP: + *val = 97; + *val2 = 703957; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_PRESSURE: + *val = data->p_scale; + *val2 = data->p_scale_dec; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_OFFSET: + switch (channel->type) { + case IIO_TEMP: + *val = -50000000; + *val2 = 97704; + return IIO_VAL_FRACTIONAL; + case IIO_PRESSURE: + *val = data->p_offset; + *val2 = data->p_offset_dec; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec hsc_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + }, +}; + +static const struct iio_info hsc_info = { + .read_raw = hsc_read_raw, +}; + +static const struct hsc_chip_data hsc_chip = { + .valid = hsc_measurement_is_valid, + .channels = hsc_channels, + .num_channels = ARRAY_SIZE(hsc_channels), +}; + +int hsc_common_probe(struct device *dev, hsc_recv_fn recv) +{ + struct hsc_data *hsc; + struct iio_dev *indio_dev; + const char *triplet; + u64 tmp; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*hsc)); + if (!indio_dev) + return -ENOMEM; + + hsc = iio_priv(indio_dev); + + hsc->chip = &hsc_chip; + hsc->recv_cb = recv; + hsc->dev = dev; + + ret = device_property_read_u32(dev, "honeywell,transfer-function", + &hsc->function); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,transfer-function could not be read\n"); + if (hsc->function > HSC_FUNCTION_F) + return dev_err_probe(dev, -EINVAL, + "honeywell,transfer-function %d invalid\n", + hsc->function); + + ret = device_property_read_string(dev, "honeywell,pressure-triplet", + &triplet); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pressure-triplet could not be read\n"); + + if (str_has_prefix(triplet, "NA")) { + ret = device_property_read_u32(dev, "honeywell,pmin-pascal", + &hsc->pmin); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pmin-pascal could not be read\n"); + + ret = device_property_read_u32(dev, "honeywell,pmax-pascal", + &hsc->pmax); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pmax-pascal could not be read\n"); + } else { + ret = device_property_match_property_string(dev, + "honeywell,pressure-triplet", + hsc_triplet_variants, + HSC_VARIANTS_MAX); + if (ret < 0) + return dev_err_probe(dev, -EINVAL, + "honeywell,pressure-triplet is invalid\n"); + + hsc->pmin = hsc_range_config[ret].pmin; + hsc->pmax = hsc_range_config[ret].pmax; + } + + if (hsc->pmin >= hsc->pmax) + return dev_err_probe(dev, -EINVAL, + "pressure limits are invalid\n"); + + ret = devm_regulator_get_enable(dev, "vdd"); + if (ret) + return dev_err_probe(dev, ret, "can't get vdd supply\n"); + + hsc->outmin = hsc_func_spec[hsc->function].output_min; + hsc->outmax = hsc_func_spec[hsc->function].output_max; + + tmp = div_s64(((s64)(hsc->pmax - hsc->pmin)) * MICRO, + hsc->outmax - hsc->outmin); + hsc->p_scale = div_s64_rem(tmp, NANO, &hsc->p_scale_dec); + tmp = div_s64(((s64)hsc->pmin * (s64)(hsc->outmax - hsc->outmin)) * MICRO, + hsc->pmax - hsc->pmin); + tmp -= (s64)hsc->outmin * MICRO; + hsc->p_offset = div_s64_rem(tmp, MICRO, &hsc->p_offset_dec); + + indio_dev->name = "hsc030pa"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &hsc_info; + indio_dev->channels = hsc->chip->channels; + indio_dev->num_channels = hsc->chip->num_channels; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS(hsc_common_probe, IIO_HONEYWELL_HSC030PA); + +MODULE_AUTHOR("Petre Rodan "); +MODULE_DESCRIPTION("Honeywell HSC and SSC pressure sensor core driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/hsc030pa.h b/drivers/iio/pressure/hsc030pa.h new file mode 100644 index 0000000000..d20420dba4 --- /dev/null +++ b/drivers/iio/pressure/hsc030pa.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Honeywell TruStability HSC Series pressure/temperature sensor + * + * Copyright (c) 2023 Petre Rodan + */ + +#ifndef _HSC030PA_H +#define _HSC030PA_H + +#include + +#define HSC_REG_MEASUREMENT_RD_SIZE 4 + +struct device; + +struct iio_chan_spec; +struct iio_dev; + +struct hsc_data; +struct hsc_chip_data; + +typedef int (*hsc_recv_fn)(struct hsc_data *); + +/** + * struct hsc_data + * @dev: current device structure + * @chip: structure containing chip's channel properties + * @recv_cb: function that implements the chip reads + * @is_valid: true if last transfer has been validated + * @pmin: minimum measurable pressure limit + * @pmax: maximum measurable pressure limit + * @outmin: minimum raw pressure in counts (based on transfer function) + * @outmax: maximum raw pressure in counts (based on transfer function) + * @function: transfer function + * @p_scale: pressure scale + * @p_scale_dec: pressure scale, decimal places + * @p_offset: pressure offset + * @p_offset_dec: pressure offset, decimal places + * @buffer: raw conversion data + */ +struct hsc_data { + struct device *dev; + const struct hsc_chip_data *chip; + hsc_recv_fn recv_cb; + bool is_valid; + s32 pmin; + s32 pmax; + u32 outmin; + u32 outmax; + u32 function; + s64 p_scale; + s32 p_scale_dec; + s64 p_offset; + s32 p_offset_dec; + u8 buffer[HSC_REG_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); +}; + +struct hsc_chip_data { + bool (*valid)(struct hsc_data *data); + const struct iio_chan_spec *channels; + u8 num_channels; +}; + +enum hsc_func_id { + HSC_FUNCTION_A, + HSC_FUNCTION_B, + HSC_FUNCTION_C, + HSC_FUNCTION_F, +}; + +int hsc_common_probe(struct device *dev, hsc_recv_fn recv); + +#endif diff --git a/drivers/iio/pressure/hsc030pa_i2c.c b/drivers/iio/pressure/hsc030pa_i2c.c new file mode 100644 index 0000000000..e2b524b364 --- /dev/null +++ b/drivers/iio/pressure/hsc030pa_i2c.c @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Honeywell TruStability HSC Series pressure/temperature sensor + * + * Copyright (c) 2023 Petre Rodan + * + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [hsc] + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf [i2c related] + */ + +#include +#include +#include +#include + +#include + +#include "hsc030pa.h" + +static int hsc_i2c_recv(struct hsc_data *data) +{ + struct i2c_client *client = to_i2c_client(data->dev); + struct i2c_msg msg; + int ret; + + msg.addr = client->addr; + msg.flags = client->flags | I2C_M_RD; + msg.len = HSC_REG_MEASUREMENT_RD_SIZE; + msg.buf = data->buffer; + + ret = i2c_transfer(client->adapter, &msg, 1); + + return (ret == 2) ? 0 : ret; +} + +static int hsc_i2c_probe(struct i2c_client *client) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + return hsc_common_probe(&client->dev, hsc_i2c_recv); +} + +static const struct of_device_id hsc_i2c_match[] = { + { .compatible = "honeywell,hsc030pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, hsc_i2c_match); + +static const struct i2c_device_id hsc_i2c_id[] = { + { "hsc030pa" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, hsc_i2c_id); + +static struct i2c_driver hsc_i2c_driver = { + .driver = { + .name = "hsc030pa", + .of_match_table = hsc_i2c_match, + }, + .probe = hsc_i2c_probe, + .id_table = hsc_i2c_id, +}; +module_i2c_driver(hsc_i2c_driver); + +MODULE_AUTHOR("Petre Rodan "); +MODULE_DESCRIPTION("Honeywell HSC and SSC pressure sensor i2c driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_HSC030PA); diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c new file mode 100644 index 0000000000..a719bade83 --- /dev/null +++ b/drivers/iio/pressure/hsc030pa_spi.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Honeywell TruStability HSC Series pressure/temperature sensor + * + * Copyright (c) 2023 Petre Rodan + * + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + */ + +#include +#include +#include +#include + +#include + +#include "hsc030pa.h" + +static int hsc_spi_recv(struct hsc_data *data) +{ + struct spi_device *spi = to_spi_device(data->dev); + struct spi_transfer xfer = { + .tx_buf = NULL, + .rx_buf = data->buffer, + .len = HSC_REG_MEASUREMENT_RD_SIZE, + }; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static int hsc_spi_probe(struct spi_device *spi) +{ + return hsc_common_probe(&spi->dev, hsc_spi_recv); +} + +static const struct of_device_id hsc_spi_match[] = { + { .compatible = "honeywell,hsc030pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, hsc_spi_match); + +static const struct spi_device_id hsc_spi_id[] = { + { "hsc030pa" }, + {} +}; +MODULE_DEVICE_TABLE(spi, hsc_spi_id); + +static struct spi_driver hsc_spi_driver = { + .driver = { + .name = "hsc030pa", + .of_match_table = hsc_spi_match, + }, + .probe = hsc_spi_probe, + .id_table = hsc_spi_id, +}; +module_spi_driver(hsc_spi_driver); + +MODULE_AUTHOR("Petre Rodan "); +MODULE_DESCRIPTION("Honeywell HSC and SSC pressure sensor spi driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_HSC030PA); diff --git a/drivers/iio/proximity/irsd200.c b/drivers/iio/proximity/irsd200.c index bdff91f6b1..323ac6dac9 100644 --- a/drivers/iio/proximity/irsd200.c +++ b/drivers/iio/proximity/irsd200.c @@ -7,7 +7,6 @@ #include #include -#include #include #include #include diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c index 438f9c9aba..ac2ed2da21 100644 --- a/drivers/iio/proximity/sx9324.c +++ b/drivers/iio/proximity/sx9324.c @@ -888,7 +888,6 @@ sx9324_get_default_reg(struct device *dev, int idx, char prop[] = SX9324_PROXRAW_DEF; u32 start = 0, raw = 0, pos = 0; int ret, count, ph, pin; - const char *res; memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def)); @@ -915,24 +914,21 @@ sx9324_get_default_reg(struct device *dev, int idx, reg_def->def = raw; break; case SX9324_REG_AFE_CTRL0: - ret = device_property_read_string(dev, - "semtech,cs-idle-sleep", &res); - if (!ret) - ret = match_string(sx9324_csidle, ARRAY_SIZE(sx9324_csidle), res); + ret = device_property_match_property_string(dev, "semtech,cs-idle-sleep", + sx9324_csidle, + ARRAY_SIZE(sx9324_csidle)); if (ret >= 0) { reg_def->def &= ~SX9324_REG_AFE_CTRL0_CSIDLE_MASK; reg_def->def |= ret << SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT; } - ret = device_property_read_string(dev, - "semtech,int-comp-resistor", &res); - if (ret) - break; - ret = match_string(sx9324_rints, ARRAY_SIZE(sx9324_rints), res); - if (ret < 0) - break; - reg_def->def &= ~SX9324_REG_AFE_CTRL0_RINT_MASK; - reg_def->def |= ret << SX9324_REG_AFE_CTRL0_RINT_SHIFT; + ret = device_property_match_property_string(dev, "semtech,int-comp-resistor", + sx9324_rints, + ARRAY_SIZE(sx9324_rints)); + if (ret >= 0) { + reg_def->def &= ~SX9324_REG_AFE_CTRL0_RINT_MASK; + reg_def->def |= ret << SX9324_REG_AFE_CTRL0_RINT_SHIFT; + } break; case SX9324_REG_AFE_CTRL4: case SX9324_REG_AFE_CTRL7: diff --git a/drivers/iio/resolver/ad2s1210.c b/drivers/iio/resolver/ad2s1210.c index 1bd1b950e7..a414eef12e 100644 --- a/drivers/iio/resolver/ad2s1210.c +++ b/drivers/iio/resolver/ad2s1210.c @@ -141,7 +141,7 @@ struct ad2s1210_state { struct spi_device *sdev; /** GPIO pin connected to SAMPLE line. */ struct gpio_desc *sample_gpio; - /** GPIO pins connected to A0 and A1 lines. */ + /** GPIO pins connected to A0 and A1 lines (optional). */ struct gpio_descs *mode_gpios; /** Used to access config registers. */ struct regmap *regmap; @@ -149,6 +149,8 @@ struct ad2s1210_state { unsigned long clkin_hz; /** Available raw hysteresis values based on resolution. */ int hysteresis_available[2]; + /* adi,fixed-mode property - only valid when mode_gpios == NULL. */ + enum ad2s1210_mode fixed_mode; /** The selected resolution */ enum ad2s1210_resolution resolution; /** Copy of fault register from the previous read. */ @@ -175,6 +177,9 @@ static int ad2s1210_set_mode(struct ad2s1210_state *st, enum ad2s1210_mode mode) struct gpio_descs *gpios = st->mode_gpios; DECLARE_BITMAP(bitmap, 2); + if (!gpios) + return mode == st->fixed_mode ? 0 : -EOPNOTSUPP; + bitmap[0] = mode; return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info, @@ -276,7 +281,8 @@ static int ad2s1210_regmap_reg_read(void *context, unsigned int reg, * parity error. The fault register is read-only and the D7 bit means * something else there. */ - if (reg != AD2S1210_REG_FAULT && st->rx[1] & AD2S1210_ADDRESS_DATA) + if ((reg > AD2S1210_REG_VELOCITY_LSB && reg != AD2S1210_REG_FAULT) + && st->rx[1] & AD2S1210_ADDRESS_DATA) return -EBADMSG; *val = st->rx[1]; @@ -450,21 +456,53 @@ static int ad2s1210_single_conversion(struct iio_dev *indio_dev, ad2s1210_toggle_sample_line(st); timestamp = iio_get_time_ns(indio_dev); - switch (chan->type) { - case IIO_ANGL: - ret = ad2s1210_set_mode(st, MOD_POS); - break; - case IIO_ANGL_VEL: - ret = ad2s1210_set_mode(st, MOD_VEL); - break; - default: - return -EINVAL; + if (st->fixed_mode == MOD_CONFIG) { + unsigned int reg_val; + + switch (chan->type) { + case IIO_ANGL: + ret = regmap_bulk_read(st->regmap, + AD2S1210_REG_POSITION_MSB, + &st->sample.raw, 2); + if (ret < 0) + return ret; + + break; + case IIO_ANGL_VEL: + ret = regmap_bulk_read(st->regmap, + AD2S1210_REG_VELOCITY_MSB, + &st->sample.raw, 2); + if (ret < 0) + return ret; + + break; + default: + return -EINVAL; + } + + ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, ®_val); + if (ret < 0) + return ret; + + st->sample.fault = reg_val; + } else { + switch (chan->type) { + case IIO_ANGL: + ret = ad2s1210_set_mode(st, MOD_POS); + break; + case IIO_ANGL_VEL: + ret = ad2s1210_set_mode(st, MOD_VEL); + break; + default: + return -EINVAL; + } + if (ret < 0) + return ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + return ret; } - if (ret < 0) - return ret; - ret = spi_read(st->sdev, &st->sample, 3); - if (ret < 0) - return ret; switch (chan->type) { case IIO_ANGL: @@ -1252,27 +1290,53 @@ static irqreturn_t ad2s1210_trigger_handler(int irq, void *p) ad2s1210_toggle_sample_line(st); if (test_bit(0, indio_dev->active_scan_mask)) { - ret = ad2s1210_set_mode(st, MOD_POS); - if (ret < 0) - goto error_ret; - - ret = spi_read(st->sdev, &st->sample, 3); - if (ret < 0) - goto error_ret; + if (st->fixed_mode == MOD_CONFIG) { + ret = regmap_bulk_read(st->regmap, + AD2S1210_REG_POSITION_MSB, + &st->sample.raw, 2); + if (ret < 0) + goto error_ret; + } else { + ret = ad2s1210_set_mode(st, MOD_POS); + if (ret < 0) + goto error_ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + goto error_ret; + } memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); } if (test_bit(1, indio_dev->active_scan_mask)) { - ret = ad2s1210_set_mode(st, MOD_VEL); - if (ret < 0) - goto error_ret; + if (st->fixed_mode == MOD_CONFIG) { + ret = regmap_bulk_read(st->regmap, + AD2S1210_REG_VELOCITY_MSB, + &st->sample.raw, 2); + if (ret < 0) + goto error_ret; + } else { + ret = ad2s1210_set_mode(st, MOD_VEL); + if (ret < 0) + goto error_ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + goto error_ret; + } - ret = spi_read(st->sdev, &st->sample, 3); + memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); + } + + if (st->fixed_mode == MOD_CONFIG) { + unsigned int reg_val; + + ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, ®_val); if (ret < 0) - goto error_ret; + return ret; - memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); + st->sample.fault = reg_val; } ad2s1210_push_events(indio_dev, st->sample.fault, pf->timestamp); @@ -1299,9 +1363,24 @@ static const struct iio_info ad2s1210_info = { static int ad2s1210_setup_properties(struct ad2s1210_state *st) { struct device *dev = &st->sdev->dev; + const char *str_val; u32 val; int ret; + ret = device_property_read_string(dev, "adi,fixed-mode", &str_val); + if (ret == -EINVAL) + st->fixed_mode = -1; + else if (ret < 0) + return dev_err_probe(dev, ret, + "failed to read adi,fixed-mode property\n"); + else { + if (strcmp(str_val, "config")) + return dev_err_probe(dev, -EINVAL, + "only adi,fixed-mode=\"config\" is supported\n"); + + st->fixed_mode = MOD_CONFIG; + } + ret = device_property_read_u32(dev, "assigned-resolution-bits", &val); if (ret < 0) return dev_err_probe(dev, ret, @@ -1347,6 +1426,7 @@ static int ad2s1210_setup_gpios(struct ad2s1210_state *st) { struct device *dev = &st->sdev->dev; struct gpio_descs *resolution_gpios; + struct gpio_desc *reset_gpio; DECLARE_BITMAP(bitmap, 2); int ret; @@ -1357,12 +1437,21 @@ static int ad2s1210_setup_gpios(struct ad2s1210_state *st) "failed to request sample GPIO\n"); /* both pins high means that we start in config mode */ - st->mode_gpios = devm_gpiod_get_array(dev, "mode", GPIOD_OUT_HIGH); + st->mode_gpios = devm_gpiod_get_array_optional(dev, "mode", + GPIOD_OUT_HIGH); if (IS_ERR(st->mode_gpios)) return dev_err_probe(dev, PTR_ERR(st->mode_gpios), "failed to request mode GPIOs\n"); - if (st->mode_gpios->ndescs != 2) + if (!st->mode_gpios && st->fixed_mode == -1) + return dev_err_probe(dev, -EINVAL, + "must specify either adi,fixed-mode or mode-gpios\n"); + + if (st->mode_gpios && st->fixed_mode != -1) + return dev_err_probe(dev, -EINVAL, + "must specify only one of adi,fixed-mode or mode-gpios\n"); + + if (st->mode_gpios && st->mode_gpios->ndescs != 2) return dev_err_probe(dev, -EINVAL, "requires exactly 2 mode-gpios\n"); @@ -1393,6 +1482,17 @@ static int ad2s1210_setup_gpios(struct ad2s1210_state *st) "failed to set resolution gpios\n"); } + /* If the optional reset GPIO is present, toggle it to do a hard reset. */ + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpio)) + return dev_err_probe(dev, PTR_ERR(reset_gpio), + "failed to request reset GPIO\n"); + + if (reset_gpio) { + udelay(10); + gpiod_set_value(reset_gpio, 0); + } + return 0; } diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig index ed384f33e0..ed0e496336 100644 --- a/drivers/iio/temperature/Kconfig +++ b/drivers/iio/temperature/Kconfig @@ -76,6 +76,18 @@ config MLX90632 This driver can also be built as a module. If so, the module will be called mlx90632. +config MLX90635 + tristate "MLX90635 contact-less infrared sensor with medical accuracy" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Melexis + MLX90635 contact-less infrared sensor with medical accuracy + connected with I2C. + + This driver can also be built as a module. If so, the module will + be called mlx90635. + config TMP006 tristate "TMP006 infrared thermopile sensor" depends on I2C @@ -158,4 +170,14 @@ config MAX31865 This driver can also be build as a module. If so, the module will be called max31865. +config MCP9600 + tristate "MCP9600 thermocouple EMF converter" + depends on I2C + help + If you say yes here you get support for MCP9600 + thermocouple EMF converter connected via I2C. + + This driver can also be built as a module. If so, the module + will be called mcp9600. + endmenu diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile index dfec8c6d30..07d6e65709 100644 --- a/drivers/iio/temperature/Makefile +++ b/drivers/iio/temperature/Makefile @@ -10,8 +10,10 @@ obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o obj-$(CONFIG_MAX30208) += max30208.o obj-$(CONFIG_MAX31856) += max31856.o obj-$(CONFIG_MAX31865) += max31865.o +obj-$(CONFIG_MCP9600) += mcp9600.o obj-$(CONFIG_MLX90614) += mlx90614.o obj-$(CONFIG_MLX90632) += mlx90632.o +obj-$(CONFIG_MLX90632) += mlx90635.o obj-$(CONFIG_TMP006) += tmp006.o obj-$(CONFIG_TMP007) += tmp007.o obj-$(CONFIG_TMP117) += tmp117.o diff --git a/drivers/iio/temperature/mcp9600.c b/drivers/iio/temperature/mcp9600.c new file mode 100644 index 0000000000..4684580429 --- /dev/null +++ b/drivers/iio/temperature/mcp9600.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * mcp9600.c - Support for Microchip MCP9600 thermocouple EMF converter + * + * Copyright (c) 2022 Andrew Hepp + * Author: + */ + +#include +#include +#include +#include +#include + +#include + +/* MCP9600 registers */ +#define MCP9600_HOT_JUNCTION 0x0 +#define MCP9600_COLD_JUNCTION 0x2 +#define MCP9600_DEVICE_ID 0x20 + +/* MCP9600 device id value */ +#define MCP9600_DEVICE_ID_MCP9600 0x40 + +static const struct iio_chan_spec mcp9600_channels[] = { + { + .type = IIO_TEMP, + .address = MCP9600_HOT_JUNCTION, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .address = MCP9600_COLD_JUNCTION, + .channel2 = IIO_MOD_TEMP_AMBIENT, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +struct mcp9600_data { + struct i2c_client *client; +}; + +static int mcp9600_read(struct mcp9600_data *data, + struct iio_chan_spec const *chan, int *val) +{ + int ret; + + ret = i2c_smbus_read_word_swapped(data->client, chan->address); + + if (ret < 0) + return ret; + *val = ret; + + return 0; +} + +static int mcp9600_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct mcp9600_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = mcp9600_read(data, chan, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 62; + *val2 = 500000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info mcp9600_info = { + .read_raw = mcp9600_read_raw, +}; + +static int mcp9600_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct mcp9600_data *data; + int ret; + + ret = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID); + if (ret < 0) + return dev_err_probe(&client->dev, ret, "Failed to read device ID\n"); + if (ret != MCP9600_DEVICE_ID_MCP9600) + dev_warn(&client->dev, "Expected ID %x, got %x\n", + MCP9600_DEVICE_ID_MCP9600, ret); + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + + indio_dev->info = &mcp9600_info; + indio_dev->name = "mcp9600"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mcp9600_channels; + indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id mcp9600_id[] = { + { "mcp9600" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mcp9600_id); + +static const struct of_device_id mcp9600_of_match[] = { + { .compatible = "microchip,mcp9600" }, + {} +}; +MODULE_DEVICE_TABLE(of, mcp9600_of_match); + +static struct i2c_driver mcp9600_driver = { + .driver = { + .name = "mcp9600", + .of_match_table = mcp9600_of_match, + }, + .probe = mcp9600_probe, + .id_table = mcp9600_id +}; +module_i2c_driver(mcp9600_driver); + +MODULE_AUTHOR("Andrew Hepp "); +MODULE_DESCRIPTION("Microchip MCP9600 thermocouple EMF converter driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/temperature/mlx90635.c b/drivers/iio/temperature/mlx90635.c new file mode 100644 index 0000000000..1f5c962c18 --- /dev/null +++ b/drivers/iio/temperature/mlx90635.c @@ -0,0 +1,1097 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mlx90635.c - Melexis MLX90635 contactless IR temperature sensor + * + * Copyright (c) 2023 Melexis + * + * Driver for the Melexis MLX90635 I2C 16-bit IR thermopile sensor + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Memory sections addresses */ +#define MLX90635_ADDR_RAM 0x0000 /* Start address of ram */ +#define MLX90635_ADDR_EEPROM 0x0018 /* Start address of user eeprom */ + +/* EEPROM addresses - used at startup */ +#define MLX90635_EE_I2C_CFG 0x0018 /* I2C address register initial value */ +#define MLX90635_EE_CTRL1 0x001A /* Control register1 initial value */ +#define MLX90635_EE_CTRL2 0x001C /* Control register2 initial value */ + +#define MLX90635_EE_Ha 0x001E /* Ha customer calib value reg 16bit */ +#define MLX90635_EE_Hb 0x0020 /* Hb customer calib value reg 16bit */ +#define MLX90635_EE_Fa 0x0026 /* Fa calibration register 32bit */ +#define MLX90635_EE_FASCALE 0x002A /* Scaling coefficient for Fa register 16bit */ +#define MLX90635_EE_Ga 0x002C /* Ga calibration register 16bit */ +#define MLX90635_EE_Fb 0x002E /* Fb calibration register 16bit */ +#define MLX90635_EE_Ea 0x0030 /* Ea calibration register 32bit */ +#define MLX90635_EE_Eb 0x0034 /* Eb calibration register 32bit */ +#define MLX90635_EE_P_G 0x0038 /* P_G calibration register 16bit */ +#define MLX90635_EE_P_O 0x003A /* P_O calibration register 16bit */ +#define MLX90635_EE_Aa 0x003C /* Aa calibration register 16bit */ +#define MLX90635_EE_VERSION 0x003E /* Version bits 4:7 and 12:15 */ +#define MLX90635_EE_Gb 0x0040 /* Gb calibration register 16bit */ + +/* Device status register - volatile */ +#define MLX90635_REG_STATUS 0x0000 +#define MLX90635_STAT_BUSY BIT(6) /* Device busy indicator */ +#define MLX90635_STAT_BRST BIT(5) /* Brown out reset indicator */ +#define MLX90635_STAT_CYCLE_POS GENMASK(4, 2) /* Data position */ +#define MLX90635_STAT_END_CONV BIT(1) /* End of conversion indicator */ +#define MLX90635_STAT_DATA_RDY BIT(0) /* Data ready indicator */ + +/* EEPROM control register address - volatile */ +#define MLX90635_REG_EE 0x000C +#define MLX90635_EE_ACTIVE BIT(4) /* Power-on EEPROM */ +#define MLX90635_EE_BUSY_MASK BIT(15) + +#define MLX90635_REG_CMD 0x0010 /* Command register address */ + +/* Control register1 address - volatile */ +#define MLX90635_REG_CTRL1 0x0014 +#define MLX90635_CTRL1_REFRESH_RATE_MASK GENMASK(2, 0) +#define MLX90635_CTRL1_RES_CTRL_MASK GENMASK(4, 3) +#define MLX90635_CTRL1_TABLE_MASK BIT(15) /* Table select */ + +/* Control register2 address - volatile */ +#define MLX90635_REG_CTRL2 0x0016 +#define MLX90635_CTRL2_BURST_CNT_MASK GENMASK(10, 6) /* Burst count */ +#define MLX90635_CTRL2_MODE_MASK GENMASK(12, 11) /* Power mode */ +#define MLX90635_CTRL2_SOB_MASK BIT(15) + +/* PowerModes statuses */ +#define MLX90635_PWR_STATUS_HALT 0 +#define MLX90635_PWR_STATUS_SLEEP_STEP 1 +#define MLX90635_PWR_STATUS_STEP 2 +#define MLX90635_PWR_STATUS_CONTINUOUS 3 + +/* Measurement data addresses */ +#define MLX90635_RESULT_1 0x0002 +#define MLX90635_RESULT_2 0x0004 +#define MLX90635_RESULT_3 0x0006 +#define MLX90635_RESULT_4 0x0008 +#define MLX90635_RESULT_5 0x000A + +/* Timings (ms) */ +#define MLX90635_TIMING_RST_MIN 200 /* Minimum time after addressed reset command */ +#define MLX90635_TIMING_RST_MAX 250 /* Maximum time after addressed reset command */ +#define MLX90635_TIMING_POLLING 10000 /* Time between bit polling*/ +#define MLX90635_TIMING_EE_ACTIVE_MIN 100 /* Minimum time after activating the EEPROM for read */ +#define MLX90635_TIMING_EE_ACTIVE_MAX 150 /* Maximum time after activating the EEPROM for read */ + +/* Magic constants */ +#define MLX90635_ID_DSPv1 0x01 /* EEPROM DSP version */ +#define MLX90635_RESET_CMD 0x0006 /* Reset sensor (address or global) */ +#define MLX90635_MAX_MEAS_NUM 31 /* Maximum number of measurements in list */ +#define MLX90635_PTAT_DIV 12 /* Used to divide the PTAT value in pre-processing */ +#define MLX90635_IR_DIV 24 /* Used to divide the IR value in pre-processing */ +#define MLX90635_SLEEP_DELAY_MS 6000 /* Autosleep delay */ +#define MLX90635_MEAS_MAX_TIME 2000 /* Max measurement time in ms for the lowest refresh rate */ +#define MLX90635_READ_RETRIES 100 /* Number of read retries before quitting with timeout error */ +#define MLX90635_VERSION_MASK (GENMASK(15, 12) | GENMASK(7, 4)) +#define MLX90635_DSP_VERSION(reg) (((reg & GENMASK(14, 12)) >> 9) | ((reg & GENMASK(6, 4)) >> 4)) +#define MLX90635_DSP_FIXED BIT(15) + + +/** + * struct mlx90635_data - private data for the MLX90635 device + * @client: I2C client of the device + * @lock: Internal mutex because multiple reads are needed for single triggered + * measurement to ensure data consistency + * @regmap: Regmap of the device registers + * @regmap_ee: Regmap of the device EEPROM which can be cached + * @emissivity: Object emissivity from 0 to 1000 where 1000 = 1 + * @regulator: Regulator of the device + * @powerstatus: Current POWER status of the device + * @interaction_ts: Timestamp of the last temperature read that is used + * for power management in jiffies + */ +struct mlx90635_data { + struct i2c_client *client; + struct mutex lock; + struct regmap *regmap; + struct regmap *regmap_ee; + u16 emissivity; + struct regulator *regulator; + int powerstatus; + unsigned long interaction_ts; +}; + +static const struct regmap_range mlx90635_volatile_reg_range[] = { + regmap_reg_range(MLX90635_REG_STATUS, MLX90635_REG_STATUS), + regmap_reg_range(MLX90635_RESULT_1, MLX90635_RESULT_5), + regmap_reg_range(MLX90635_REG_EE, MLX90635_REG_EE), + regmap_reg_range(MLX90635_REG_CMD, MLX90635_REG_CMD), + regmap_reg_range(MLX90635_REG_CTRL1, MLX90635_REG_CTRL2), +}; + +static const struct regmap_access_table mlx90635_volatile_regs_tbl = { + .yes_ranges = mlx90635_volatile_reg_range, + .n_yes_ranges = ARRAY_SIZE(mlx90635_volatile_reg_range), +}; + +static const struct regmap_range mlx90635_read_reg_range[] = { + regmap_reg_range(MLX90635_REG_STATUS, MLX90635_REG_STATUS), + regmap_reg_range(MLX90635_RESULT_1, MLX90635_RESULT_5), + regmap_reg_range(MLX90635_REG_EE, MLX90635_REG_EE), + regmap_reg_range(MLX90635_REG_CMD, MLX90635_REG_CMD), + regmap_reg_range(MLX90635_REG_CTRL1, MLX90635_REG_CTRL2), +}; + +static const struct regmap_access_table mlx90635_readable_regs_tbl = { + .yes_ranges = mlx90635_read_reg_range, + .n_yes_ranges = ARRAY_SIZE(mlx90635_read_reg_range), +}; + +static const struct regmap_range mlx90635_no_write_reg_range[] = { + regmap_reg_range(MLX90635_RESULT_1, MLX90635_RESULT_5), +}; + +static const struct regmap_access_table mlx90635_writeable_regs_tbl = { + .no_ranges = mlx90635_no_write_reg_range, + .n_no_ranges = ARRAY_SIZE(mlx90635_no_write_reg_range), +}; + +static const struct regmap_config mlx90635_regmap = { + .name = "mlx90635-registers", + .reg_stride = 1, + .reg_bits = 16, + .val_bits = 16, + + .volatile_table = &mlx90635_volatile_regs_tbl, + .rd_table = &mlx90635_readable_regs_tbl, + .wr_table = &mlx90635_writeable_regs_tbl, + + .use_single_read = true, + .use_single_write = true, + .can_multi_write = false, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_BIG, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct regmap_range mlx90635_read_ee_range[] = { + regmap_reg_range(MLX90635_EE_I2C_CFG, MLX90635_EE_CTRL2), + regmap_reg_range(MLX90635_EE_Ha, MLX90635_EE_Gb), +}; + +static const struct regmap_access_table mlx90635_readable_ees_tbl = { + .yes_ranges = mlx90635_read_ee_range, + .n_yes_ranges = ARRAY_SIZE(mlx90635_read_ee_range), +}; + +static const struct regmap_range mlx90635_no_write_ee_range[] = { + regmap_reg_range(MLX90635_ADDR_EEPROM, MLX90635_EE_Gb), +}; + +static const struct regmap_access_table mlx90635_writeable_ees_tbl = { + .no_ranges = mlx90635_no_write_ee_range, + .n_no_ranges = ARRAY_SIZE(mlx90635_no_write_ee_range), +}; + +static const struct regmap_config mlx90635_regmap_ee = { + .name = "mlx90635-eeprom", + .reg_stride = 1, + .reg_bits = 16, + .val_bits = 16, + + .volatile_table = NULL, + .rd_table = &mlx90635_readable_ees_tbl, + .wr_table = &mlx90635_writeable_ees_tbl, + + .use_single_read = true, + .use_single_write = true, + .can_multi_write = false, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_BIG, + .cache_type = REGCACHE_RBTREE, +}; + +/** + * mlx90635_reset_delay() - Give the mlx90635 some time to reset properly + * If this is not done, the following I2C command(s) will not be accepted. + */ +static void mlx90635_reset_delay(void) +{ + usleep_range(MLX90635_TIMING_RST_MIN, MLX90635_TIMING_RST_MAX); +} + +static int mlx90635_pwr_sleep_step(struct mlx90635_data *data) +{ + int ret; + + if (data->powerstatus == MLX90635_PWR_STATUS_SLEEP_STEP) + return 0; + + ret = regmap_write_bits(data->regmap, MLX90635_REG_CTRL2, MLX90635_CTRL2_MODE_MASK, + FIELD_PREP(MLX90635_CTRL2_MODE_MASK, MLX90635_PWR_STATUS_SLEEP_STEP)); + if (ret < 0) + return ret; + + data->powerstatus = MLX90635_PWR_STATUS_SLEEP_STEP; + return 0; +} + +static int mlx90635_pwr_continuous(struct mlx90635_data *data) +{ + int ret; + + if (data->powerstatus == MLX90635_PWR_STATUS_CONTINUOUS) + return 0; + + ret = regmap_write_bits(data->regmap, MLX90635_REG_CTRL2, MLX90635_CTRL2_MODE_MASK, + FIELD_PREP(MLX90635_CTRL2_MODE_MASK, MLX90635_PWR_STATUS_CONTINUOUS)); + if (ret < 0) + return ret; + + data->powerstatus = MLX90635_PWR_STATUS_CONTINUOUS; + return 0; +} + +static int mlx90635_read_ee_register(struct regmap *regmap, u16 reg_lsb, + s32 *reg_value) +{ + unsigned int read; + u32 value; + int ret; + + ret = regmap_read(regmap, reg_lsb + 2, &read); + if (ret < 0) + return ret; + + value = read; + + ret = regmap_read(regmap, reg_lsb, &read); + if (ret < 0) + return ret; + + *reg_value = (read << 16) | (value & 0xffff); + + return 0; +} + +static int mlx90635_read_ee_ambient(struct regmap *regmap, s16 *PG, s16 *PO, s16 *Gb) +{ + unsigned int read_tmp; + int ret; + + ret = regmap_read(regmap, MLX90635_EE_P_O, &read_tmp); + if (ret < 0) + return ret; + *PO = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_P_G, &read_tmp); + if (ret < 0) + return ret; + *PG = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_Gb, &read_tmp); + if (ret < 0) + return ret; + *Gb = (u16)read_tmp; + + return 0; +} + +static int mlx90635_read_ee_object(struct regmap *regmap, u32 *Ea, u32 *Eb, u32 *Fa, s16 *Fb, + s16 *Ga, s16 *Gb, s16 *Ha, s16 *Hb, u16 *Fa_scale) +{ + unsigned int read_tmp; + int ret; + + ret = mlx90635_read_ee_register(regmap, MLX90635_EE_Ea, Ea); + if (ret < 0) + return ret; + + ret = mlx90635_read_ee_register(regmap, MLX90635_EE_Eb, Eb); + if (ret < 0) + return ret; + + ret = mlx90635_read_ee_register(regmap, MLX90635_EE_Fa, Fa); + if (ret < 0) + return ret; + + ret = regmap_read(regmap, MLX90635_EE_Ha, &read_tmp); + if (ret < 0) + return ret; + *Ha = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_Hb, &read_tmp); + if (ret < 0) + return ret; + *Hb = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_Ga, &read_tmp); + if (ret < 0) + return ret; + *Ga = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_Gb, &read_tmp); + if (ret < 0) + return ret; + *Gb = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_Fb, &read_tmp); + if (ret < 0) + return ret; + *Fb = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_EE_FASCALE, &read_tmp); + if (ret < 0) + return ret; + *Fa_scale = (u16)read_tmp; + + return 0; +} + +static int mlx90635_calculate_dataset_ready_time(struct mlx90635_data *data, int *refresh_time) +{ + unsigned int reg; + int ret; + + ret = regmap_read(data->regmap, MLX90635_REG_CTRL1, ®); + if (ret < 0) + return ret; + + *refresh_time = 2 * (MLX90635_MEAS_MAX_TIME >> FIELD_GET(MLX90635_CTRL1_REFRESH_RATE_MASK, reg)) + 80; + + return 0; +} + +static int mlx90635_perform_measurement_burst(struct mlx90635_data *data) +{ + unsigned int reg_status; + int refresh_time; + int ret; + + ret = regmap_write_bits(data->regmap, MLX90635_REG_STATUS, + MLX90635_STAT_END_CONV, MLX90635_STAT_END_CONV); + if (ret < 0) + return ret; + + ret = mlx90635_calculate_dataset_ready_time(data, &refresh_time); + if (ret < 0) + return ret; + + ret = regmap_write_bits(data->regmap, MLX90635_REG_CTRL2, + FIELD_PREP(MLX90635_CTRL2_SOB_MASK, 1), + FIELD_PREP(MLX90635_CTRL2_SOB_MASK, 1)); + if (ret < 0) + return ret; + + msleep(refresh_time); /* Wait minimum time for dataset to be ready */ + + ret = regmap_read_poll_timeout(data->regmap, MLX90635_REG_STATUS, reg_status, + (!(reg_status & MLX90635_STAT_END_CONV)) == 0, + MLX90635_TIMING_POLLING, MLX90635_READ_RETRIES * 10000); + if (ret < 0) { + dev_err(&data->client->dev, "data not ready"); + return -ETIMEDOUT; + } + + return 0; +} + +static int mlx90635_read_ambient_raw(struct regmap *regmap, + s16 *ambient_new_raw, s16 *ambient_old_raw) +{ + unsigned int read_tmp; + int ret; + + ret = regmap_read(regmap, MLX90635_RESULT_2, &read_tmp); + if (ret < 0) + return ret; + *ambient_new_raw = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_RESULT_3, &read_tmp); + if (ret < 0) + return ret; + *ambient_old_raw = (s16)read_tmp; + + return 0; +} + +static int mlx90635_read_object_raw(struct regmap *regmap, s16 *object_raw) +{ + unsigned int read_tmp; + s16 read; + int ret; + + ret = regmap_read(regmap, MLX90635_RESULT_1, &read_tmp); + if (ret < 0) + return ret; + + read = (s16)read_tmp; + + ret = regmap_read(regmap, MLX90635_RESULT_4, &read_tmp); + if (ret < 0) + return ret; + *object_raw = (read - (s16)read_tmp) / 2; + + return 0; +} + +static int mlx90635_read_all_channel(struct mlx90635_data *data, + s16 *ambient_new_raw, s16 *ambient_old_raw, + s16 *object_raw) +{ + int ret; + + mutex_lock(&data->lock); + if (data->powerstatus == MLX90635_PWR_STATUS_SLEEP_STEP) { + /* Trigger measurement in Sleep Step mode */ + ret = mlx90635_perform_measurement_burst(data); + if (ret < 0) + goto read_unlock; + } + + ret = mlx90635_read_ambient_raw(data->regmap, ambient_new_raw, + ambient_old_raw); + if (ret < 0) + goto read_unlock; + + ret = mlx90635_read_object_raw(data->regmap, object_raw); +read_unlock: + mutex_unlock(&data->lock); + return ret; +} + +static s64 mlx90635_preprocess_temp_amb(s16 ambient_new_raw, + s16 ambient_old_raw, s16 Gb) +{ + s64 VR_Ta, kGb, tmp; + + kGb = ((s64)Gb * 1000LL) >> 10ULL; + VR_Ta = (s64)ambient_old_raw * 1000000LL + + kGb * div64_s64(((s64)ambient_new_raw * 1000LL), + (MLX90635_PTAT_DIV)); + tmp = div64_s64( + div64_s64(((s64)ambient_new_raw * 1000000000000LL), + (MLX90635_PTAT_DIV)), VR_Ta); + return div64_s64(tmp << 19ULL, 1000LL); +} + +static s64 mlx90635_preprocess_temp_obj(s16 object_raw, + s16 ambient_new_raw, + s16 ambient_old_raw, s16 Gb) +{ + s64 VR_IR, kGb, tmp; + + kGb = ((s64)Gb * 1000LL) >> 10ULL; + VR_IR = (s64)ambient_old_raw * 1000000LL + + kGb * (div64_s64((s64)ambient_new_raw * 1000LL, + MLX90635_PTAT_DIV)); + tmp = div64_s64( + div64_s64((s64)(object_raw * 1000000LL), + MLX90635_IR_DIV) * 1000000LL, + VR_IR); + return div64_s64((tmp << 19ULL), 1000LL); +} + +static s32 mlx90635_calc_temp_ambient(s16 ambient_new_raw, s16 ambient_old_raw, + u16 P_G, u16 P_O, s16 Gb) +{ + s64 kPG, kPO, AMB; + + AMB = mlx90635_preprocess_temp_amb(ambient_new_raw, ambient_old_raw, + Gb); + kPG = ((s64)P_G * 1000000LL) >> 9ULL; + kPO = AMB - (((s64)P_O * 1000LL) >> 1ULL); + + return 30 * 1000LL + div64_s64(kPO * 1000000LL, kPG); +} + +static s32 mlx90635_calc_temp_object_iteration(s32 prev_object_temp, s64 object, + s64 TAdut, s64 TAdut4, s16 Ga, + u32 Fa, u16 Fa_scale, s16 Fb, + s16 Ha, s16 Hb, u16 emissivity) +{ + s64 calcedGa, calcedGb, calcedFa, Alpha_corr; + s64 Ha_customer, Hb_customer; + + Ha_customer = ((s64)Ha * 1000000LL) >> 14ULL; + Hb_customer = ((s64)Hb * 100) >> 10ULL; + + calcedGa = ((s64)((s64)Ga * (prev_object_temp - 35 * 1000LL) + * 1000LL)) >> 24LL; + calcedGb = ((s64)(Fb * (TAdut - 30 * 1000000LL))) >> 24LL; + + Alpha_corr = ((s64)((s64)Fa * Ha_customer * 10000LL) >> Fa_scale); + Alpha_corr *= ((s64)(1 * 1000000LL + calcedGa + calcedGb)); + + Alpha_corr = div64_s64(Alpha_corr, 1000LL); + Alpha_corr *= emissivity; + Alpha_corr = div64_s64(Alpha_corr, 100LL); + calcedFa = div64_s64((s64)object * 100000000000LL, Alpha_corr); + + return (int_sqrt64(int_sqrt64(calcedFa * 100000000LL + TAdut4)) + - 27315 - Hb_customer) * 10; +} + +static s64 mlx90635_calc_ta4(s64 TAdut, s64 scale) +{ + return (div64_s64(TAdut, scale) + 27315) * + (div64_s64(TAdut, scale) + 27315) * + (div64_s64(TAdut, scale) + 27315) * + (div64_s64(TAdut, scale) + 27315); +} + +static s32 mlx90635_calc_temp_object(s64 object, s64 ambient, u32 Ea, u32 Eb, + s16 Ga, u32 Fa, u16 Fa_scale, s16 Fb, s16 Ha, s16 Hb, + u16 tmp_emi) +{ + s64 kTA, kTA0, TAdut, TAdut4; + s64 temp = 35000; + s8 i; + + kTA = (Ea * 1000LL) >> 16LL; + kTA0 = (Eb * 1000LL) >> 8LL; + TAdut = div64_s64(((ambient - kTA0) * 1000000LL), kTA) + 30 * 1000000LL; + TAdut4 = mlx90635_calc_ta4(TAdut, 10000LL); + + /* Iterations of calculation as described in datasheet */ + for (i = 0; i < 5; ++i) { + temp = mlx90635_calc_temp_object_iteration(temp, object, TAdut, TAdut4, + Ga, Fa, Fa_scale, Fb, Ha, Hb, + tmp_emi); + } + return temp; +} + +static int mlx90635_calc_object(struct mlx90635_data *data, int *val) +{ + s16 ambient_new_raw, ambient_old_raw, object_raw; + s16 Fb, Ga, Gb, Ha, Hb; + s64 object, ambient; + u32 Ea, Eb, Fa; + u16 Fa_scale; + int ret; + + ret = mlx90635_read_ee_object(data->regmap_ee, &Ea, &Eb, &Fa, &Fb, &Ga, &Gb, &Ha, &Hb, &Fa_scale); + if (ret < 0) + return ret; + + ret = mlx90635_read_all_channel(data, + &ambient_new_raw, &ambient_old_raw, + &object_raw); + if (ret < 0) + return ret; + + ambient = mlx90635_preprocess_temp_amb(ambient_new_raw, + ambient_old_raw, Gb); + object = mlx90635_preprocess_temp_obj(object_raw, + ambient_new_raw, + ambient_old_raw, Gb); + + *val = mlx90635_calc_temp_object(object, ambient, Ea, Eb, Ga, Fa, Fa_scale, Fb, + Ha, Hb, data->emissivity); + return 0; +} + +static int mlx90635_calc_ambient(struct mlx90635_data *data, int *val) +{ + s16 ambient_new_raw, ambient_old_raw; + s16 PG, PO, Gb; + int ret; + + ret = mlx90635_read_ee_ambient(data->regmap_ee, &PG, &PO, &Gb); + if (ret < 0) + return ret; + + mutex_lock(&data->lock); + if (data->powerstatus == MLX90635_PWR_STATUS_SLEEP_STEP) { + ret = mlx90635_perform_measurement_burst(data); + if (ret < 0) + goto read_ambient_unlock; + } + + ret = mlx90635_read_ambient_raw(data->regmap, &ambient_new_raw, + &ambient_old_raw); +read_ambient_unlock: + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + *val = mlx90635_calc_temp_ambient(ambient_new_raw, ambient_old_raw, + PG, PO, Gb); + return ret; +} + +static int mlx90635_get_refresh_rate(struct mlx90635_data *data, + unsigned int *refresh_rate) +{ + unsigned int reg; + int ret; + + ret = regmap_read(data->regmap, MLX90635_REG_CTRL1, ®); + if (ret < 0) + return ret; + + *refresh_rate = FIELD_GET(MLX90635_CTRL1_REFRESH_RATE_MASK, reg); + + return 0; +} + +static const struct { + int val; + int val2; +} mlx90635_freqs[] = { + { 0, 200000 }, + { 0, 500000 }, + { 0, 900000 }, + { 1, 700000 }, + { 3, 0 }, + { 4, 800000 }, + { 6, 900000 }, + { 8, 900000 } +}; + +/** + * mlx90635_pm_interaction_wakeup() - Measure time between user interactions to change powermode + * @data: pointer to mlx90635_data object containing interaction_ts information + * + * Switch to continuous mode when interaction is faster than MLX90635_MEAS_MAX_TIME. Update the + * interaction_ts for each function call with the jiffies to enable measurement between function + * calls. Initial value of the interaction_ts needs to be set before this function call. + */ +static int mlx90635_pm_interaction_wakeup(struct mlx90635_data *data) +{ + unsigned long now; + int ret; + + now = jiffies; + if (time_in_range(now, data->interaction_ts, + data->interaction_ts + + msecs_to_jiffies(MLX90635_MEAS_MAX_TIME + 100))) { + ret = mlx90635_pwr_continuous(data); + if (ret < 0) + return ret; + } + + data->interaction_ts = now; + + return 0; +} + +static int mlx90635_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct mlx90635_data *data = iio_priv(indio_dev); + int ret; + int cr; + + pm_runtime_get_sync(&data->client->dev); + ret = mlx90635_pm_interaction_wakeup(data); + if (ret < 0) + goto mlx90635_read_raw_pm; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (channel->channel2) { + case IIO_MOD_TEMP_AMBIENT: + ret = mlx90635_calc_ambient(data, val); + if (ret < 0) + goto mlx90635_read_raw_pm; + + ret = IIO_VAL_INT; + break; + case IIO_MOD_TEMP_OBJECT: + ret = mlx90635_calc_object(data, val); + if (ret < 0) + goto mlx90635_read_raw_pm; + + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + break; + case IIO_CHAN_INFO_CALIBEMISSIVITY: + if (data->emissivity == 1000) { + *val = 1; + *val2 = 0; + } else { + *val = 0; + *val2 = data->emissivity * 1000; + } + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = mlx90635_get_refresh_rate(data, &cr); + if (ret < 0) + goto mlx90635_read_raw_pm; + + *val = mlx90635_freqs[cr].val; + *val2 = mlx90635_freqs[cr].val2; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + +mlx90635_read_raw_pm: + pm_runtime_mark_last_busy(&data->client->dev); + pm_runtime_put_autosuspend(&data->client->dev); + return ret; +} + +static int mlx90635_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int val, + int val2, long mask) +{ + struct mlx90635_data *data = iio_priv(indio_dev); + int ret; + int i; + + switch (mask) { + case IIO_CHAN_INFO_CALIBEMISSIVITY: + /* Confirm we are within 0 and 1.0 */ + if (val < 0 || val2 < 0 || val > 1 || + (val == 1 && val2 != 0)) + return -EINVAL; + data->emissivity = val * 1000 + val2 / 1000; + return 0; + case IIO_CHAN_INFO_SAMP_FREQ: + for (i = 0; i < ARRAY_SIZE(mlx90635_freqs); i++) { + if (val == mlx90635_freqs[i].val && + val2 == mlx90635_freqs[i].val2) + break; + } + if (i == ARRAY_SIZE(mlx90635_freqs)) + return -EINVAL; + + ret = regmap_write_bits(data->regmap, MLX90635_REG_CTRL1, + MLX90635_CTRL1_REFRESH_RATE_MASK, i); + + return ret; + default: + return -EINVAL; + } +} + +static int mlx90635_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (int *)mlx90635_freqs; + *type = IIO_VAL_INT_PLUS_MICRO; + *length = 2 * ARRAY_SIZE(mlx90635_freqs); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec mlx90635_channels[] = { + { + .type = IIO_TEMP, + .modified = 1, + .channel2 = IIO_MOD_TEMP_AMBIENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_TEMP, + .modified = 1, + .channel2 = IIO_MOD_TEMP_OBJECT, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_CALIBEMISSIVITY), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, +}; + +static const struct iio_info mlx90635_info = { + .read_raw = mlx90635_read_raw, + .write_raw = mlx90635_write_raw, + .read_avail = mlx90635_read_avail, +}; + +static void mlx90635_sleep(void *_data) +{ + struct mlx90635_data *data = _data; + + mlx90635_pwr_sleep_step(data); +} + +static int mlx90635_suspend(struct mlx90635_data *data) +{ + return mlx90635_pwr_sleep_step(data); +} + +static int mlx90635_wakeup(struct mlx90635_data *data) +{ + s16 Fb, Ga, Gb, Ha, Hb, PG, PO; + unsigned int dsp_version; + u32 Ea, Eb, Fa; + u16 Fa_scale; + int ret; + + regcache_cache_bypass(data->regmap_ee, false); + regcache_cache_only(data->regmap_ee, false); + regcache_cache_only(data->regmap, false); + + ret = mlx90635_pwr_continuous(data); + if (ret < 0) { + dev_err(&data->client->dev, "Switch to continuous mode failed\n"); + return ret; + } + ret = regmap_write_bits(data->regmap, MLX90635_REG_EE, + MLX90635_EE_ACTIVE, MLX90635_EE_ACTIVE); + if (ret < 0) { + dev_err(&data->client->dev, "Powering EEPROM failed\n"); + return ret; + } + usleep_range(MLX90635_TIMING_EE_ACTIVE_MIN, MLX90635_TIMING_EE_ACTIVE_MAX); + + regcache_mark_dirty(data->regmap_ee); + + ret = regcache_sync(data->regmap_ee); + if (ret < 0) { + dev_err(&data->client->dev, + "Failed to sync cache: %d\n", ret); + return ret; + } + + ret = mlx90635_read_ee_ambient(data->regmap_ee, &PG, &PO, &Gb); + if (ret < 0) { + dev_err(&data->client->dev, + "Failed to read to cache Ambient coefficients EEPROM region: %d\n", ret); + return ret; + } + + ret = mlx90635_read_ee_object(data->regmap_ee, &Ea, &Eb, &Fa, &Fb, &Ga, &Gb, &Ha, &Hb, &Fa_scale); + if (ret < 0) { + dev_err(&data->client->dev, + "Failed to read to cache Object coefficients EEPROM region: %d\n", ret); + return ret; + } + + ret = regmap_read(data->regmap_ee, MLX90635_EE_VERSION, &dsp_version); + if (ret < 0) { + dev_err(&data->client->dev, + "Failed to read to cache of EEPROM version: %d\n", ret); + return ret; + } + + regcache_cache_only(data->regmap_ee, true); + + return ret; +} + +static void mlx90635_disable_regulator(void *_data) +{ + struct mlx90635_data *data = _data; + int ret; + + ret = regulator_disable(data->regulator); + if (ret < 0) + dev_err(regmap_get_device(data->regmap), + "Failed to disable power regulator: %d\n", ret); +} + +static int mlx90635_enable_regulator(struct mlx90635_data *data) +{ + int ret; + + ret = regulator_enable(data->regulator); + if (ret < 0) { + dev_err(regmap_get_device(data->regmap), "Failed to enable power regulator!\n"); + return ret; + } + + mlx90635_reset_delay(); + + return ret; +} + +static int mlx90635_probe(struct i2c_client *client) +{ + struct mlx90635_data *mlx90635; + struct iio_dev *indio_dev; + unsigned int dsp_version; + struct regmap *regmap; + struct regmap *regmap_ee; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*mlx90635)); + if (!indio_dev) + return dev_err_probe(&client->dev, -ENOMEM, "failed to allocate device\n"); + + regmap = devm_regmap_init_i2c(client, &mlx90635_regmap); + if (IS_ERR(regmap)) + return dev_err_probe(&client->dev, PTR_ERR(regmap), + "failed to allocate regmap\n"); + + regmap_ee = devm_regmap_init_i2c(client, &mlx90635_regmap_ee); + if (IS_ERR(regmap)) + return dev_err_probe(&client->dev, PTR_ERR(regmap), + "failed to allocate regmap\n"); + + mlx90635 = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + mlx90635->client = client; + mlx90635->regmap = regmap; + mlx90635->regmap_ee = regmap_ee; + mlx90635->powerstatus = MLX90635_PWR_STATUS_SLEEP_STEP; + + mutex_init(&mlx90635->lock); + indio_dev->name = "mlx90635"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &mlx90635_info; + indio_dev->channels = mlx90635_channels; + indio_dev->num_channels = ARRAY_SIZE(mlx90635_channels); + + mlx90635->regulator = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(mlx90635->regulator)) + return dev_err_probe(&client->dev, PTR_ERR(mlx90635->regulator), + "failed to get vdd regulator"); + + ret = mlx90635_enable_regulator(mlx90635); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(&client->dev, mlx90635_disable_regulator, + mlx90635); + if (ret < 0) + return dev_err_probe(&client->dev, ret, + "failed to setup regulator cleanup action\n"); + + ret = mlx90635_wakeup(mlx90635); + if (ret < 0) + return dev_err_probe(&client->dev, ret, "wakeup failed\n"); + + ret = devm_add_action_or_reset(&client->dev, mlx90635_sleep, mlx90635); + if (ret < 0) + return dev_err_probe(&client->dev, ret, + "failed to setup low power cleanup\n"); + + ret = regmap_read(mlx90635->regmap_ee, MLX90635_EE_VERSION, &dsp_version); + if (ret < 0) + return dev_err_probe(&client->dev, ret, "read of version failed\n"); + + dsp_version = dsp_version & MLX90635_VERSION_MASK; + + if (FIELD_GET(MLX90635_DSP_FIXED, dsp_version)) { + if (MLX90635_DSP_VERSION(dsp_version) == MLX90635_ID_DSPv1) { + dev_dbg(&client->dev, + "Detected DSP v1 calibration %x\n", dsp_version); + } else { + dev_dbg(&client->dev, + "Detected Unknown EEPROM calibration %lx\n", + MLX90635_DSP_VERSION(dsp_version)); + } + } else { + return dev_err_probe(&client->dev, -EPROTONOSUPPORT, + "Wrong fixed top bit %x (expected 0x8X0X)\n", + dsp_version); + } + + mlx90635->emissivity = 1000; + mlx90635->interaction_ts = jiffies; /* Set initial value */ + + pm_runtime_get_noresume(&client->dev); + pm_runtime_set_active(&client->dev); + + ret = devm_pm_runtime_enable(&client->dev); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to enable powermanagement\n"); + + pm_runtime_set_autosuspend_delay(&client->dev, MLX90635_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put_autosuspend(&client->dev); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id mlx90635_id[] = { + { "mlx90635" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mlx90635_id); + +static const struct of_device_id mlx90635_of_match[] = { + { .compatible = "melexis,mlx90635" }, + { } +}; +MODULE_DEVICE_TABLE(of, mlx90635_of_match); + +static int mlx90635_pm_suspend(struct device *dev) +{ + struct mlx90635_data *data = iio_priv(dev_get_drvdata(dev)); + int ret; + + ret = mlx90635_suspend(data); + if (ret < 0) + return ret; + + ret = regulator_disable(data->regulator); + if (ret < 0) + dev_err(regmap_get_device(data->regmap), + "Failed to disable power regulator: %d\n", ret); + + return ret; +} + +static int mlx90635_pm_resume(struct device *dev) +{ + struct mlx90635_data *data = iio_priv(dev_get_drvdata(dev)); + int ret; + + ret = mlx90635_enable_regulator(data); + if (ret < 0) + return ret; + + return mlx90635_wakeup(data); +} + +static int mlx90635_pm_runtime_suspend(struct device *dev) +{ + struct mlx90635_data *data = iio_priv(dev_get_drvdata(dev)); + + return mlx90635_pwr_sleep_step(data); +} + +static const struct dev_pm_ops mlx90635_pm_ops = { + SYSTEM_SLEEP_PM_OPS(mlx90635_pm_suspend, mlx90635_pm_resume) + RUNTIME_PM_OPS(mlx90635_pm_runtime_suspend, NULL, NULL) +}; + +static struct i2c_driver mlx90635_driver = { + .driver = { + .name = "mlx90635", + .of_match_table = mlx90635_of_match, + .pm = pm_ptr(&mlx90635_pm_ops), + }, + .probe = mlx90635_probe, + .id_table = mlx90635_id, +}; +module_i2c_driver(mlx90635_driver); + +MODULE_AUTHOR("Crt Mori "); +MODULE_DESCRIPTION("Melexis MLX90635 contactless Infra Red temperature sensor driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3