From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/infiniband/hw/hfi1/init.c | 1980 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1980 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/init.c (limited to 'drivers/infiniband/hw/hfi1/init.c') diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c new file mode 100644 index 0000000000..6de37c5d7d --- /dev/null +++ b/drivers/infiniband/hw/hfi1/init.c @@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause +/* + * Copyright(c) 2015 - 2020 Intel Corporation. + * Copyright(c) 2021 Cornelis Networks. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hfi.h" +#include "device.h" +#include "common.h" +#include "trace.h" +#include "mad.h" +#include "sdma.h" +#include "debugfs.h" +#include "verbs.h" +#include "aspm.h" +#include "affinity.h" +#include "vnic.h" +#include "exp_rcv.h" +#include "netdev.h" + +#undef pr_fmt +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + +/* + * min buffers we want to have per context, after driver + */ +#define HFI1_MIN_USER_CTXT_BUFCNT 7 + +#define HFI1_MIN_EAGER_BUFFER_SIZE (4 * 1024) /* 4KB */ +#define HFI1_MAX_EAGER_BUFFER_SIZE (256 * 1024) /* 256KB */ + +#define NUM_IB_PORTS 1 + +/* + * Number of user receive contexts we are configured to use (to allow for more + * pio buffers per ctxt, etc.) Zero means use one user context per CPU. + */ +int num_user_contexts = -1; +module_param_named(num_user_contexts, num_user_contexts, int, 0444); +MODULE_PARM_DESC( + num_user_contexts, "Set max number of user contexts to use (default: -1 will use the real (non-HT) CPU count)"); + +uint krcvqs[RXE_NUM_DATA_VL]; +int krcvqsset; +module_param_array(krcvqs, uint, &krcvqsset, S_IRUGO); +MODULE_PARM_DESC(krcvqs, "Array of the number of non-control kernel receive queues by VL"); + +/* computed based on above array */ +unsigned long n_krcvqs; + +static unsigned hfi1_rcvarr_split = 25; +module_param_named(rcvarr_split, hfi1_rcvarr_split, uint, S_IRUGO); +MODULE_PARM_DESC(rcvarr_split, "Percent of context's RcvArray entries used for Eager buffers"); + +static uint eager_buffer_size = (8 << 20); /* 8MB */ +module_param(eager_buffer_size, uint, S_IRUGO); +MODULE_PARM_DESC(eager_buffer_size, "Size of the eager buffers, default: 8MB"); + +static uint rcvhdrcnt = 2048; /* 2x the max eager buffer count */ +module_param_named(rcvhdrcnt, rcvhdrcnt, uint, S_IRUGO); +MODULE_PARM_DESC(rcvhdrcnt, "Receive header queue count (default 2048)"); + +static uint hfi1_hdrq_entsize = 32; +module_param_named(hdrq_entsize, hfi1_hdrq_entsize, uint, 0444); +MODULE_PARM_DESC(hdrq_entsize, "Size of header queue entries: 2 - 8B, 16 - 64B, 32 - 128B (default)"); + +unsigned int user_credit_return_threshold = 33; /* default is 33% */ +module_param(user_credit_return_threshold, uint, S_IRUGO); +MODULE_PARM_DESC(user_credit_return_threshold, "Credit return threshold for user send contexts, return when unreturned credits passes this many blocks (in percent of allocated blocks, 0 is off)"); + +DEFINE_XARRAY_FLAGS(hfi1_dev_table, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ); + +static int hfi1_create_kctxt(struct hfi1_devdata *dd, + struct hfi1_pportdata *ppd) +{ + struct hfi1_ctxtdata *rcd; + int ret; + + /* Control context has to be always 0 */ + BUILD_BUG_ON(HFI1_CTRL_CTXT != 0); + + ret = hfi1_create_ctxtdata(ppd, dd->node, &rcd); + if (ret < 0) { + dd_dev_err(dd, "Kernel receive context allocation failed\n"); + return ret; + } + + /* + * Set up the kernel context flags here and now because they use + * default values for all receive side memories. User contexts will + * be handled as they are created. + */ + rcd->flags = HFI1_CAP_KGET(MULTI_PKT_EGR) | + HFI1_CAP_KGET(NODROP_RHQ_FULL) | + HFI1_CAP_KGET(NODROP_EGR_FULL) | + HFI1_CAP_KGET(DMA_RTAIL); + + /* Control context must use DMA_RTAIL */ + if (rcd->ctxt == HFI1_CTRL_CTXT) + rcd->flags |= HFI1_CAP_DMA_RTAIL; + rcd->fast_handler = get_dma_rtail_setting(rcd) ? + handle_receive_interrupt_dma_rtail : + handle_receive_interrupt_nodma_rtail; + + hfi1_set_seq_cnt(rcd, 1); + + rcd->sc = sc_alloc(dd, SC_ACK, rcd->rcvhdrqentsize, dd->node); + if (!rcd->sc) { + dd_dev_err(dd, "Kernel send context allocation failed\n"); + return -ENOMEM; + } + hfi1_init_ctxt(rcd->sc); + + return 0; +} + +/* + * Create the receive context array and one or more kernel contexts + */ +int hfi1_create_kctxts(struct hfi1_devdata *dd) +{ + u16 i; + int ret; + + dd->rcd = kcalloc_node(dd->num_rcv_contexts, sizeof(*dd->rcd), + GFP_KERNEL, dd->node); + if (!dd->rcd) + return -ENOMEM; + + for (i = 0; i < dd->first_dyn_alloc_ctxt; ++i) { + ret = hfi1_create_kctxt(dd, dd->pport); + if (ret) + goto bail; + } + + return 0; +bail: + for (i = 0; dd->rcd && i < dd->first_dyn_alloc_ctxt; ++i) + hfi1_free_ctxt(dd->rcd[i]); + + /* All the contexts should be freed, free the array */ + kfree(dd->rcd); + dd->rcd = NULL; + return ret; +} + +/* + * Helper routines for the receive context reference count (rcd and uctxt). + */ +static void hfi1_rcd_init(struct hfi1_ctxtdata *rcd) +{ + kref_init(&rcd->kref); +} + +/** + * hfi1_rcd_free - When reference is zero clean up. + * @kref: pointer to an initialized rcd data structure + * + */ +static void hfi1_rcd_free(struct kref *kref) +{ + unsigned long flags; + struct hfi1_ctxtdata *rcd = + container_of(kref, struct hfi1_ctxtdata, kref); + + spin_lock_irqsave(&rcd->dd->uctxt_lock, flags); + rcd->dd->rcd[rcd->ctxt] = NULL; + spin_unlock_irqrestore(&rcd->dd->uctxt_lock, flags); + + hfi1_free_ctxtdata(rcd->dd, rcd); + + kfree(rcd); +} + +/** + * hfi1_rcd_put - decrement reference for rcd + * @rcd: pointer to an initialized rcd data structure + * + * Use this to put a reference after the init. + */ +int hfi1_rcd_put(struct hfi1_ctxtdata *rcd) +{ + if (rcd) + return kref_put(&rcd->kref, hfi1_rcd_free); + + return 0; +} + +/** + * hfi1_rcd_get - increment reference for rcd + * @rcd: pointer to an initialized rcd data structure + * + * Use this to get a reference after the init. + * + * Return : reflect kref_get_unless_zero(), which returns non-zero on + * increment, otherwise 0. + */ +int hfi1_rcd_get(struct hfi1_ctxtdata *rcd) +{ + return kref_get_unless_zero(&rcd->kref); +} + +/** + * allocate_rcd_index - allocate an rcd index from the rcd array + * @dd: pointer to a valid devdata structure + * @rcd: rcd data structure to assign + * @index: pointer to index that is allocated + * + * Find an empty index in the rcd array, and assign the given rcd to it. + * If the array is full, we are EBUSY. + * + */ +static int allocate_rcd_index(struct hfi1_devdata *dd, + struct hfi1_ctxtdata *rcd, u16 *index) +{ + unsigned long flags; + u16 ctxt; + + spin_lock_irqsave(&dd->uctxt_lock, flags); + for (ctxt = 0; ctxt < dd->num_rcv_contexts; ctxt++) + if (!dd->rcd[ctxt]) + break; + + if (ctxt < dd->num_rcv_contexts) { + rcd->ctxt = ctxt; + dd->rcd[ctxt] = rcd; + hfi1_rcd_init(rcd); + } + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + + if (ctxt >= dd->num_rcv_contexts) + return -EBUSY; + + *index = ctxt; + + return 0; +} + +/** + * hfi1_rcd_get_by_index_safe - validate the ctxt index before accessing the + * array + * @dd: pointer to a valid devdata structure + * @ctxt: the index of an possilbe rcd + * + * This is a wrapper for hfi1_rcd_get_by_index() to validate that the given + * ctxt index is valid. + * + * The caller is responsible for making the _put(). + * + */ +struct hfi1_ctxtdata *hfi1_rcd_get_by_index_safe(struct hfi1_devdata *dd, + u16 ctxt) +{ + if (ctxt < dd->num_rcv_contexts) + return hfi1_rcd_get_by_index(dd, ctxt); + + return NULL; +} + +/** + * hfi1_rcd_get_by_index - get by index + * @dd: pointer to a valid devdata structure + * @ctxt: the index of an possilbe rcd + * + * We need to protect access to the rcd array. If access is needed to + * one or more index, get the protecting spinlock and then increment the + * kref. + * + * The caller is responsible for making the _put(). + * + */ +struct hfi1_ctxtdata *hfi1_rcd_get_by_index(struct hfi1_devdata *dd, u16 ctxt) +{ + unsigned long flags; + struct hfi1_ctxtdata *rcd = NULL; + + spin_lock_irqsave(&dd->uctxt_lock, flags); + if (dd->rcd[ctxt]) { + rcd = dd->rcd[ctxt]; + if (!hfi1_rcd_get(rcd)) + rcd = NULL; + } + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + + return rcd; +} + +/* + * Common code for user and kernel context create and setup. + * NOTE: the initial kref is done here (hf1_rcd_init()). + */ +int hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, int numa, + struct hfi1_ctxtdata **context) +{ + struct hfi1_devdata *dd = ppd->dd; + struct hfi1_ctxtdata *rcd; + unsigned kctxt_ngroups = 0; + u32 base; + + if (dd->rcv_entries.nctxt_extra > + dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt) + kctxt_ngroups = (dd->rcv_entries.nctxt_extra - + (dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt)); + rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, numa); + if (rcd) { + u32 rcvtids, max_entries; + u16 ctxt; + int ret; + + ret = allocate_rcd_index(dd, rcd, &ctxt); + if (ret) { + *context = NULL; + kfree(rcd); + return ret; + } + + INIT_LIST_HEAD(&rcd->qp_wait_list); + hfi1_exp_tid_group_init(rcd); + rcd->ppd = ppd; + rcd->dd = dd; + rcd->numa_id = numa; + rcd->rcv_array_groups = dd->rcv_entries.ngroups; + rcd->rhf_rcv_function_map = normal_rhf_rcv_functions; + rcd->slow_handler = handle_receive_interrupt; + rcd->do_interrupt = rcd->slow_handler; + rcd->msix_intr = CCE_NUM_MSIX_VECTORS; + + mutex_init(&rcd->exp_mutex); + spin_lock_init(&rcd->exp_lock); + INIT_LIST_HEAD(&rcd->flow_queue.queue_head); + INIT_LIST_HEAD(&rcd->rarr_queue.queue_head); + + hfi1_cdbg(PROC, "setting up context %u", rcd->ctxt); + + /* + * Calculate the context's RcvArray entry starting point. + * We do this here because we have to take into account all + * the RcvArray entries that previous context would have + * taken and we have to account for any extra groups assigned + * to the static (kernel) or dynamic (vnic/user) contexts. + */ + if (ctxt < dd->first_dyn_alloc_ctxt) { + if (ctxt < kctxt_ngroups) { + base = ctxt * (dd->rcv_entries.ngroups + 1); + rcd->rcv_array_groups++; + } else { + base = kctxt_ngroups + + (ctxt * dd->rcv_entries.ngroups); + } + } else { + u16 ct = ctxt - dd->first_dyn_alloc_ctxt; + + base = ((dd->n_krcv_queues * dd->rcv_entries.ngroups) + + kctxt_ngroups); + if (ct < dd->rcv_entries.nctxt_extra) { + base += ct * (dd->rcv_entries.ngroups + 1); + rcd->rcv_array_groups++; + } else { + base += dd->rcv_entries.nctxt_extra + + (ct * dd->rcv_entries.ngroups); + } + } + rcd->eager_base = base * dd->rcv_entries.group_size; + + rcd->rcvhdrq_cnt = rcvhdrcnt; + rcd->rcvhdrqentsize = hfi1_hdrq_entsize; + rcd->rhf_offset = + rcd->rcvhdrqentsize - sizeof(u64) / sizeof(u32); + /* + * Simple Eager buffer allocation: we have already pre-allocated + * the number of RcvArray entry groups. Each ctxtdata structure + * holds the number of groups for that context. + * + * To follow CSR requirements and maintain cacheline alignment, + * make sure all sizes and bases are multiples of group_size. + * + * The expected entry count is what is left after assigning + * eager. + */ + max_entries = rcd->rcv_array_groups * + dd->rcv_entries.group_size; + rcvtids = ((max_entries * hfi1_rcvarr_split) / 100); + rcd->egrbufs.count = round_down(rcvtids, + dd->rcv_entries.group_size); + if (rcd->egrbufs.count > MAX_EAGER_ENTRIES) { + dd_dev_err(dd, "ctxt%u: requested too many RcvArray entries.\n", + rcd->ctxt); + rcd->egrbufs.count = MAX_EAGER_ENTRIES; + } + hfi1_cdbg(PROC, + "ctxt%u: max Eager buffer RcvArray entries: %u", + rcd->ctxt, rcd->egrbufs.count); + + /* + * Allocate array that will hold the eager buffer accounting + * data. + * This will allocate the maximum possible buffer count based + * on the value of the RcvArray split parameter. + * The resulting value will be rounded down to the closest + * multiple of dd->rcv_entries.group_size. + */ + rcd->egrbufs.buffers = + kcalloc_node(rcd->egrbufs.count, + sizeof(*rcd->egrbufs.buffers), + GFP_KERNEL, numa); + if (!rcd->egrbufs.buffers) + goto bail; + rcd->egrbufs.rcvtids = + kcalloc_node(rcd->egrbufs.count, + sizeof(*rcd->egrbufs.rcvtids), + GFP_KERNEL, numa); + if (!rcd->egrbufs.rcvtids) + goto bail; + rcd->egrbufs.size = eager_buffer_size; + /* + * The size of the buffers programmed into the RcvArray + * entries needs to be big enough to handle the highest + * MTU supported. + */ + if (rcd->egrbufs.size < hfi1_max_mtu) { + rcd->egrbufs.size = __roundup_pow_of_two(hfi1_max_mtu); + hfi1_cdbg(PROC, + "ctxt%u: eager bufs size too small. Adjusting to %u", + rcd->ctxt, rcd->egrbufs.size); + } + rcd->egrbufs.rcvtid_size = HFI1_MAX_EAGER_BUFFER_SIZE; + + /* Applicable only for statically created kernel contexts */ + if (ctxt < dd->first_dyn_alloc_ctxt) { + rcd->opstats = kzalloc_node(sizeof(*rcd->opstats), + GFP_KERNEL, numa); + if (!rcd->opstats) + goto bail; + + /* Initialize TID flow generations for the context */ + hfi1_kern_init_ctxt_generations(rcd); + } + + *context = rcd; + return 0; + } + +bail: + *context = NULL; + hfi1_free_ctxt(rcd); + return -ENOMEM; +} + +/** + * hfi1_free_ctxt - free context + * @rcd: pointer to an initialized rcd data structure + * + * This wrapper is the free function that matches hfi1_create_ctxtdata(). + * When a context is done being used (kernel or user), this function is called + * for the "final" put to match the kref init from hfi1_create_ctxtdata(). + * Other users of the context do a get/put sequence to make sure that the + * structure isn't removed while in use. + */ +void hfi1_free_ctxt(struct hfi1_ctxtdata *rcd) +{ + hfi1_rcd_put(rcd); +} + +/* + * Select the largest ccti value over all SLs to determine the intra- + * packet gap for the link. + * + * called with cca_timer_lock held (to protect access to cca_timer + * array), and rcu_read_lock() (to protect access to cc_state). + */ +void set_link_ipg(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + struct cc_state *cc_state; + int i; + u16 cce, ccti_limit, max_ccti = 0; + u16 shift, mult; + u64 src; + u32 current_egress_rate; /* Mbits /sec */ + u64 max_pkt_time; + /* + * max_pkt_time is the maximum packet egress time in units + * of the fabric clock period 1/(805 MHz). + */ + + cc_state = get_cc_state(ppd); + + if (!cc_state) + /* + * This should _never_ happen - rcu_read_lock() is held, + * and set_link_ipg() should not be called if cc_state + * is NULL. + */ + return; + + for (i = 0; i < OPA_MAX_SLS; i++) { + u16 ccti = ppd->cca_timer[i].ccti; + + if (ccti > max_ccti) + max_ccti = ccti; + } + + ccti_limit = cc_state->cct.ccti_limit; + if (max_ccti > ccti_limit) + max_ccti = ccti_limit; + + cce = cc_state->cct.entries[max_ccti].entry; + shift = (cce & 0xc000) >> 14; + mult = (cce & 0x3fff); + + current_egress_rate = active_egress_rate(ppd); + + max_pkt_time = egress_cycles(ppd->ibmaxlen, current_egress_rate); + + src = (max_pkt_time >> shift) * mult; + + src &= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SMASK; + src <<= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SHIFT; + + write_csr(dd, SEND_STATIC_RATE_CONTROL, src); +} + +static enum hrtimer_restart cca_timer_fn(struct hrtimer *t) +{ + struct cca_timer *cca_timer; + struct hfi1_pportdata *ppd; + int sl; + u16 ccti_timer, ccti_min; + struct cc_state *cc_state; + unsigned long flags; + enum hrtimer_restart ret = HRTIMER_NORESTART; + + cca_timer = container_of(t, struct cca_timer, hrtimer); + ppd = cca_timer->ppd; + sl = cca_timer->sl; + + rcu_read_lock(); + + cc_state = get_cc_state(ppd); + + if (!cc_state) { + rcu_read_unlock(); + return HRTIMER_NORESTART; + } + + /* + * 1) decrement ccti for SL + * 2) calculate IPG for link (set_link_ipg()) + * 3) restart timer, unless ccti is at min value + */ + + ccti_min = cc_state->cong_setting.entries[sl].ccti_min; + ccti_timer = cc_state->cong_setting.entries[sl].ccti_timer; + + spin_lock_irqsave(&ppd->cca_timer_lock, flags); + + if (cca_timer->ccti > ccti_min) { + cca_timer->ccti--; + set_link_ipg(ppd); + } + + if (cca_timer->ccti > ccti_min) { + unsigned long nsec = 1024 * ccti_timer; + /* ccti_timer is in units of 1.024 usec */ + hrtimer_forward_now(t, ns_to_ktime(nsec)); + ret = HRTIMER_RESTART; + } + + spin_unlock_irqrestore(&ppd->cca_timer_lock, flags); + rcu_read_unlock(); + return ret; +} + +/* + * Common code for initializing the physical port structure. + */ +void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd, + struct hfi1_devdata *dd, u8 hw_pidx, u32 port) +{ + int i; + uint default_pkey_idx; + struct cc_state *cc_state; + + ppd->dd = dd; + ppd->hw_pidx = hw_pidx; + ppd->port = port; /* IB port number, not index */ + ppd->prev_link_width = LINK_WIDTH_DEFAULT; + /* + * There are C_VL_COUNT number of PortVLXmitWait counters. + * Adding 1 to C_VL_COUNT to include the PortXmitWait counter. + */ + for (i = 0; i < C_VL_COUNT + 1; i++) { + ppd->port_vl_xmit_wait_last[i] = 0; + ppd->vl_xmit_flit_cnt[i] = 0; + } + + default_pkey_idx = 1; + + ppd->pkeys[default_pkey_idx] = DEFAULT_P_KEY; + ppd->part_enforce |= HFI1_PART_ENFORCE_IN; + ppd->pkeys[0] = 0x8001; + + INIT_WORK(&ppd->link_vc_work, handle_verify_cap); + INIT_WORK(&ppd->link_up_work, handle_link_up); + INIT_WORK(&ppd->link_down_work, handle_link_down); + INIT_WORK(&ppd->freeze_work, handle_freeze); + INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade); + INIT_WORK(&ppd->sma_message_work, handle_sma_message); + INIT_WORK(&ppd->link_bounce_work, handle_link_bounce); + INIT_DELAYED_WORK(&ppd->start_link_work, handle_start_link); + INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work); + INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event); + + mutex_init(&ppd->hls_lock); + spin_lock_init(&ppd->qsfp_info.qsfp_lock); + + ppd->qsfp_info.ppd = ppd; + ppd->sm_trap_qp = 0x0; + ppd->sa_qp = 0x1; + + ppd->hfi1_wq = NULL; + + spin_lock_init(&ppd->cca_timer_lock); + + for (i = 0; i < OPA_MAX_SLS; i++) { + hrtimer_init(&ppd->cca_timer[i].hrtimer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + ppd->cca_timer[i].ppd = ppd; + ppd->cca_timer[i].sl = i; + ppd->cca_timer[i].ccti = 0; + ppd->cca_timer[i].hrtimer.function = cca_timer_fn; + } + + ppd->cc_max_table_entries = IB_CC_TABLE_CAP_DEFAULT; + + spin_lock_init(&ppd->cc_state_lock); + spin_lock_init(&ppd->cc_log_lock); + cc_state = kzalloc(sizeof(*cc_state), GFP_KERNEL); + RCU_INIT_POINTER(ppd->cc_state, cc_state); + if (!cc_state) + goto bail; + return; + +bail: + dd_dev_err(dd, "Congestion Control Agent disabled for port %d\n", port); +} + +/* + * Do initialization for device that is only needed on + * first detect, not on resets. + */ +static int loadtime_init(struct hfi1_devdata *dd) +{ + return 0; +} + +/** + * init_after_reset - re-initialize after a reset + * @dd: the hfi1_ib device + * + * sanity check at least some of the values after reset, and + * ensure no receive or transmit (explicitly, in case reset + * failed + */ +static int init_after_reset(struct hfi1_devdata *dd) +{ + int i; + struct hfi1_ctxtdata *rcd; + /* + * Ensure chip does no sends or receives, tail updates, or + * pioavail updates while we re-initialize. This is mostly + * for the driver data structures, not chip registers. + */ + for (i = 0; i < dd->num_rcv_contexts; i++) { + rcd = hfi1_rcd_get_by_index(dd, i); + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS | + HFI1_RCVCTRL_INTRAVAIL_DIS | + HFI1_RCVCTRL_TAILUPD_DIS, rcd); + hfi1_rcd_put(rcd); + } + pio_send_control(dd, PSC_GLOBAL_DISABLE); + for (i = 0; i < dd->num_send_contexts; i++) + sc_disable(dd->send_contexts[i].sc); + + return 0; +} + +static void enable_chip(struct hfi1_devdata *dd) +{ + struct hfi1_ctxtdata *rcd; + u32 rcvmask; + u16 i; + + /* enable PIO send */ + pio_send_control(dd, PSC_GLOBAL_ENABLE); + + /* + * Enable kernel ctxts' receive and receive interrupt. + * Other ctxts done as user opens and initializes them. + */ + for (i = 0; i < dd->first_dyn_alloc_ctxt; ++i) { + rcd = hfi1_rcd_get_by_index(dd, i); + if (!rcd) + continue; + rcvmask = HFI1_RCVCTRL_CTXT_ENB | HFI1_RCVCTRL_INTRAVAIL_ENB; + rcvmask |= HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL) ? + HFI1_RCVCTRL_TAILUPD_ENB : HFI1_RCVCTRL_TAILUPD_DIS; + if (!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) + rcvmask |= HFI1_RCVCTRL_ONE_PKT_EGR_ENB; + if (HFI1_CAP_KGET_MASK(rcd->flags, NODROP_RHQ_FULL)) + rcvmask |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB; + if (HFI1_CAP_KGET_MASK(rcd->flags, NODROP_EGR_FULL)) + rcvmask |= HFI1_RCVCTRL_NO_EGR_DROP_ENB; + if (HFI1_CAP_IS_KSET(TID_RDMA)) + rcvmask |= HFI1_RCVCTRL_TIDFLOW_ENB; + hfi1_rcvctrl(dd, rcvmask, rcd); + sc_enable(rcd->sc); + hfi1_rcd_put(rcd); + } +} + +/** + * create_workqueues - create per port workqueues + * @dd: the hfi1_ib device + */ +static int create_workqueues(struct hfi1_devdata *dd) +{ + int pidx; + struct hfi1_pportdata *ppd; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (!ppd->hfi1_wq) { + ppd->hfi1_wq = + alloc_workqueue( + "hfi%d_%d", + WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE | + WQ_MEM_RECLAIM, + HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES, + dd->unit, pidx); + if (!ppd->hfi1_wq) + goto wq_error; + } + if (!ppd->link_wq) { + /* + * Make the link workqueue single-threaded to enforce + * serialization. + */ + ppd->link_wq = + alloc_workqueue( + "hfi_link_%d_%d", + WQ_SYSFS | WQ_MEM_RECLAIM | WQ_UNBOUND, + 1, /* max_active */ + dd->unit, pidx); + if (!ppd->link_wq) + goto wq_error; + } + } + return 0; +wq_error: + pr_err("alloc_workqueue failed for port %d\n", pidx + 1); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->hfi1_wq) { + destroy_workqueue(ppd->hfi1_wq); + ppd->hfi1_wq = NULL; + } + if (ppd->link_wq) { + destroy_workqueue(ppd->link_wq); + ppd->link_wq = NULL; + } + } + return -ENOMEM; +} + +/** + * destroy_workqueues - destroy per port workqueues + * @dd: the hfi1_ib device + */ +static void destroy_workqueues(struct hfi1_devdata *dd) +{ + int pidx; + struct hfi1_pportdata *ppd; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + if (ppd->hfi1_wq) { + destroy_workqueue(ppd->hfi1_wq); + ppd->hfi1_wq = NULL; + } + if (ppd->link_wq) { + destroy_workqueue(ppd->link_wq); + ppd->link_wq = NULL; + } + } +} + +/** + * enable_general_intr() - Enable the IRQs that will be handled by the + * general interrupt handler. + * @dd: valid devdata + * + */ +static void enable_general_intr(struct hfi1_devdata *dd) +{ + set_intr_bits(dd, CCE_ERR_INT, MISC_ERR_INT, true); + set_intr_bits(dd, PIO_ERR_INT, TXE_ERR_INT, true); + set_intr_bits(dd, IS_SENDCTXT_ERR_START, IS_SENDCTXT_ERR_END, true); + set_intr_bits(dd, PBC_INT, GPIO_ASSERT_INT, true); + set_intr_bits(dd, TCRIT_INT, TCRIT_INT, true); + set_intr_bits(dd, IS_DC_START, IS_DC_END, true); + set_intr_bits(dd, IS_SENDCREDIT_START, IS_SENDCREDIT_END, true); +} + +/** + * hfi1_init - do the actual initialization sequence on the chip + * @dd: the hfi1_ib device + * @reinit: re-initializing, so don't allocate new memory + * + * Do the actual initialization sequence on the chip. This is done + * both from the init routine called from the PCI infrastructure, and + * when we reset the chip, or detect that it was reset internally, + * or it's administratively re-enabled. + * + * Memory allocation here and in called routines is only done in + * the first case (reinit == 0). We have to be careful, because even + * without memory allocation, we need to re-write all the chip registers + * TIDs, etc. after the reset or enable has completed. + */ +int hfi1_init(struct hfi1_devdata *dd, int reinit) +{ + int ret = 0, pidx, lastfail = 0; + unsigned long len; + u16 i; + struct hfi1_ctxtdata *rcd; + struct hfi1_pportdata *ppd; + + /* Set up send low level handlers */ + dd->process_pio_send = hfi1_verbs_send_pio; + dd->process_dma_send = hfi1_verbs_send_dma; + dd->pio_inline_send = pio_copy; + dd->process_vnic_dma_send = hfi1_vnic_send_dma; + + if (is_ax(dd)) { + atomic_set(&dd->drop_packet, DROP_PACKET_ON); + dd->do_drop = true; + } else { + atomic_set(&dd->drop_packet, DROP_PACKET_OFF); + dd->do_drop = false; + } + + /* make sure the link is not "up" */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + ppd->linkup = 0; + } + + if (reinit) + ret = init_after_reset(dd); + else + ret = loadtime_init(dd); + if (ret) + goto done; + + /* dd->rcd can be NULL if early initialization failed */ + for (i = 0; dd->rcd && i < dd->first_dyn_alloc_ctxt; ++i) { + /* + * Set up the (kernel) rcvhdr queue and egr TIDs. If doing + * re-init, the simplest way to handle this is to free + * existing, and re-allocate. + * Need to re-create rest of ctxt 0 ctxtdata as well. + */ + rcd = hfi1_rcd_get_by_index(dd, i); + if (!rcd) + continue; + + lastfail = hfi1_create_rcvhdrq(dd, rcd); + if (!lastfail) + lastfail = hfi1_setup_eagerbufs(rcd); + if (!lastfail) + lastfail = hfi1_kern_exp_rcv_init(rcd, reinit); + if (lastfail) { + dd_dev_err(dd, + "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n"); + ret = lastfail; + } + /* enable IRQ */ + hfi1_rcd_put(rcd); + } + + /* Allocate enough memory for user event notification. */ + len = PAGE_ALIGN(chip_rcv_contexts(dd) * HFI1_MAX_SHARED_CTXTS * + sizeof(*dd->events)); + dd->events = vmalloc_user(len); + if (!dd->events) + dd_dev_err(dd, "Failed to allocate user events page\n"); + /* + * Allocate a page for device and port status. + * Page will be shared amongst all user processes. + */ + dd->status = vmalloc_user(PAGE_SIZE); + if (!dd->status) + dd_dev_err(dd, "Failed to allocate dev status page\n"); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (dd->status) + /* Currently, we only have one port */ + ppd->statusp = &dd->status->port; + + set_mtu(ppd); + } + + /* enable chip even if we have an error, so we can debug cause */ + enable_chip(dd); + +done: + /* + * Set status even if port serdes is not initialized + * so that diags will work. + */ + if (dd->status) + dd->status->dev |= HFI1_STATUS_CHIP_PRESENT | + HFI1_STATUS_INITTED; + if (!ret) { + /* enable all interrupts from the chip */ + enable_general_intr(dd); + init_qsfp_int(dd); + + /* chip is OK for user apps; mark it as initialized */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + /* + * start the serdes - must be after interrupts are + * enabled so we are notified when the link goes up + */ + lastfail = bringup_serdes(ppd); + if (lastfail) + dd_dev_info(dd, + "Failed to bring up port %u\n", + ppd->port); + + /* + * Set status even if port serdes is not initialized + * so that diags will work. + */ + if (ppd->statusp) + *ppd->statusp |= HFI1_STATUS_CHIP_PRESENT | + HFI1_STATUS_INITTED; + if (!ppd->link_speed_enabled) + continue; + } + } + + /* if ret is non-zero, we probably should do some cleanup here... */ + return ret; +} + +struct hfi1_devdata *hfi1_lookup(int unit) +{ + return xa_load(&hfi1_dev_table, unit); +} + +/* + * Stop the timers during unit shutdown, or after an error late + * in initialization. + */ +static void stop_timers(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + int pidx; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->led_override_timer.function) { + del_timer_sync(&ppd->led_override_timer); + atomic_set(&ppd->led_override_timer_active, 0); + } + } +} + +/** + * shutdown_device - shut down a device + * @dd: the hfi1_ib device + * + * This is called to make the device quiet when we are about to + * unload the driver, and also when the device is administratively + * disabled. It does not free any data structures. + * Everything it does has to be setup again by hfi1_init(dd, 1) + */ +static void shutdown_device(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd; + struct hfi1_ctxtdata *rcd; + unsigned pidx; + int i; + + if (dd->flags & HFI1_SHUTDOWN) + return; + dd->flags |= HFI1_SHUTDOWN; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + ppd->linkup = 0; + if (ppd->statusp) + *ppd->statusp &= ~(HFI1_STATUS_IB_CONF | + HFI1_STATUS_IB_READY); + } + dd->flags &= ~HFI1_INITTED; + + /* mask and clean up interrupts */ + set_intr_bits(dd, IS_FIRST_SOURCE, IS_LAST_SOURCE, false); + msix_clean_up_interrupts(dd); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + for (i = 0; i < dd->num_rcv_contexts; i++) { + rcd = hfi1_rcd_get_by_index(dd, i); + hfi1_rcvctrl(dd, HFI1_RCVCTRL_TAILUPD_DIS | + HFI1_RCVCTRL_CTXT_DIS | + HFI1_RCVCTRL_INTRAVAIL_DIS | + HFI1_RCVCTRL_PKEY_DIS | + HFI1_RCVCTRL_ONE_PKT_EGR_DIS, rcd); + hfi1_rcd_put(rcd); + } + /* + * Gracefully stop all sends allowing any in progress to + * trickle out first. + */ + for (i = 0; i < dd->num_send_contexts; i++) + sc_flush(dd->send_contexts[i].sc); + } + + /* + * Enough for anything that's going to trickle out to have actually + * done so. + */ + udelay(20); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + /* disable all contexts */ + for (i = 0; i < dd->num_send_contexts; i++) + sc_disable(dd->send_contexts[i].sc); + /* disable the send device */ + pio_send_control(dd, PSC_GLOBAL_DISABLE); + + shutdown_led_override(ppd); + + /* + * Clear SerdesEnable. + * We can't count on interrupts since we are stopping. + */ + hfi1_quiet_serdes(ppd); + if (ppd->hfi1_wq) + flush_workqueue(ppd->hfi1_wq); + if (ppd->link_wq) + flush_workqueue(ppd->link_wq); + } + sdma_exit(dd); +} + +/** + * hfi1_free_ctxtdata - free a context's allocated data + * @dd: the hfi1_ib device + * @rcd: the ctxtdata structure + * + * free up any allocated data for a context + * It should never change any chip state, or global driver state. + */ +void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd) +{ + u32 e; + + if (!rcd) + return; + + if (rcd->rcvhdrq) { + dma_free_coherent(&dd->pcidev->dev, rcvhdrq_size(rcd), + rcd->rcvhdrq, rcd->rcvhdrq_dma); + rcd->rcvhdrq = NULL; + if (hfi1_rcvhdrtail_kvaddr(rcd)) { + dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, + (void *)hfi1_rcvhdrtail_kvaddr(rcd), + rcd->rcvhdrqtailaddr_dma); + rcd->rcvhdrtail_kvaddr = NULL; + } + } + + /* all the RcvArray entries should have been cleared by now */ + kfree(rcd->egrbufs.rcvtids); + rcd->egrbufs.rcvtids = NULL; + + for (e = 0; e < rcd->egrbufs.alloced; e++) { + if (rcd->egrbufs.buffers[e].addr) + dma_free_coherent(&dd->pcidev->dev, + rcd->egrbufs.buffers[e].len, + rcd->egrbufs.buffers[e].addr, + rcd->egrbufs.buffers[e].dma); + } + kfree(rcd->egrbufs.buffers); + rcd->egrbufs.alloced = 0; + rcd->egrbufs.buffers = NULL; + + sc_free(rcd->sc); + rcd->sc = NULL; + + vfree(rcd->subctxt_uregbase); + vfree(rcd->subctxt_rcvegrbuf); + vfree(rcd->subctxt_rcvhdr_base); + kfree(rcd->opstats); + + rcd->subctxt_uregbase = NULL; + rcd->subctxt_rcvegrbuf = NULL; + rcd->subctxt_rcvhdr_base = NULL; + rcd->opstats = NULL; +} + +/* + * Release our hold on the shared asic data. If we are the last one, + * return the structure to be finalized outside the lock. Must be + * holding hfi1_dev_table lock. + */ +static struct hfi1_asic_data *release_asic_data(struct hfi1_devdata *dd) +{ + struct hfi1_asic_data *ad; + int other; + + if (!dd->asic_data) + return NULL; + dd->asic_data->dds[dd->hfi1_id] = NULL; + other = dd->hfi1_id ? 0 : 1; + ad = dd->asic_data; + dd->asic_data = NULL; + /* return NULL if the other dd still has a link */ + return ad->dds[other] ? NULL : ad; +} + +static void finalize_asic_data(struct hfi1_devdata *dd, + struct hfi1_asic_data *ad) +{ + clean_up_i2c(dd, ad); + kfree(ad); +} + +/** + * hfi1_free_devdata - cleans up and frees per-unit data structure + * @dd: pointer to a valid devdata structure + * + * It cleans up and frees all data structures set up by + * by hfi1_alloc_devdata(). + */ +void hfi1_free_devdata(struct hfi1_devdata *dd) +{ + struct hfi1_asic_data *ad; + unsigned long flags; + + xa_lock_irqsave(&hfi1_dev_table, flags); + __xa_erase(&hfi1_dev_table, dd->unit); + ad = release_asic_data(dd); + xa_unlock_irqrestore(&hfi1_dev_table, flags); + + finalize_asic_data(dd, ad); + free_platform_config(dd); + rcu_barrier(); /* wait for rcu callbacks to complete */ + free_percpu(dd->int_counter); + free_percpu(dd->rcv_limit); + free_percpu(dd->send_schedule); + free_percpu(dd->tx_opstats); + dd->int_counter = NULL; + dd->rcv_limit = NULL; + dd->send_schedule = NULL; + dd->tx_opstats = NULL; + kfree(dd->comp_vect); + dd->comp_vect = NULL; + if (dd->rcvhdrtail_dummy_kvaddr) + dma_free_coherent(&dd->pcidev->dev, sizeof(u64), + (void *)dd->rcvhdrtail_dummy_kvaddr, + dd->rcvhdrtail_dummy_dma); + dd->rcvhdrtail_dummy_kvaddr = NULL; + sdma_clean(dd, dd->num_sdma); + rvt_dealloc_device(&dd->verbs_dev.rdi); +} + +/** + * hfi1_alloc_devdata - Allocate our primary per-unit data structure. + * @pdev: Valid PCI device + * @extra: How many bytes to alloc past the default + * + * Must be done via verbs allocator, because the verbs cleanup process + * both does cleanup and free of the data structure. + * "extra" is for chip-specific data. + */ +static struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, + size_t extra) +{ + struct hfi1_devdata *dd; + int ret, nports; + + /* extra is * number of ports */ + nports = extra / sizeof(struct hfi1_pportdata); + + dd = (struct hfi1_devdata *)rvt_alloc_device(sizeof(*dd) + extra, + nports); + if (!dd) + return ERR_PTR(-ENOMEM); + dd->num_pports = nports; + dd->pport = (struct hfi1_pportdata *)(dd + 1); + dd->pcidev = pdev; + pci_set_drvdata(pdev, dd); + + ret = xa_alloc_irq(&hfi1_dev_table, &dd->unit, dd, xa_limit_32b, + GFP_KERNEL); + if (ret < 0) { + dev_err(&pdev->dev, + "Could not allocate unit ID: error %d\n", -ret); + goto bail; + } + rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s_%d", class_name(), dd->unit); + /* + * If the BIOS does not have the NUMA node information set, select + * NUMA 0 so we get consistent performance. + */ + dd->node = pcibus_to_node(pdev->bus); + if (dd->node == NUMA_NO_NODE) { + dd_dev_err(dd, "Invalid PCI NUMA node. Performance may be affected\n"); + dd->node = 0; + } + + /* + * Initialize all locks for the device. This needs to be as early as + * possible so locks are usable. + */ + spin_lock_init(&dd->sc_lock); + spin_lock_init(&dd->sendctrl_lock); + spin_lock_init(&dd->rcvctrl_lock); + spin_lock_init(&dd->uctxt_lock); + spin_lock_init(&dd->hfi1_diag_trans_lock); + spin_lock_init(&dd->sc_init_lock); + spin_lock_init(&dd->dc8051_memlock); + seqlock_init(&dd->sc2vl_lock); + spin_lock_init(&dd->sde_map_lock); + spin_lock_init(&dd->pio_map_lock); + mutex_init(&dd->dc8051_lock); + init_waitqueue_head(&dd->event_queue); + spin_lock_init(&dd->irq_src_lock); + + dd->int_counter = alloc_percpu(u64); + if (!dd->int_counter) { + ret = -ENOMEM; + goto bail; + } + + dd->rcv_limit = alloc_percpu(u64); + if (!dd->rcv_limit) { + ret = -ENOMEM; + goto bail; + } + + dd->send_schedule = alloc_percpu(u64); + if (!dd->send_schedule) { + ret = -ENOMEM; + goto bail; + } + + dd->tx_opstats = alloc_percpu(struct hfi1_opcode_stats_perctx); + if (!dd->tx_opstats) { + ret = -ENOMEM; + goto bail; + } + + dd->comp_vect = kzalloc(sizeof(*dd->comp_vect), GFP_KERNEL); + if (!dd->comp_vect) { + ret = -ENOMEM; + goto bail; + } + + /* allocate dummy tail memory for all receive contexts */ + dd->rcvhdrtail_dummy_kvaddr = + dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), + &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); + if (!dd->rcvhdrtail_dummy_kvaddr) { + ret = -ENOMEM; + goto bail; + } + + atomic_set(&dd->ipoib_rsm_usr_num, 0); + return dd; + +bail: + hfi1_free_devdata(dd); + return ERR_PTR(ret); +} + +/* + * Called from freeze mode handlers, and from PCI error + * reporting code. Should be paranoid about state of + * system and data structures. + */ +void hfi1_disable_after_error(struct hfi1_devdata *dd) +{ + if (dd->flags & HFI1_INITTED) { + u32 pidx; + + dd->flags &= ~HFI1_INITTED; + if (dd->pport) + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + struct hfi1_pportdata *ppd; + + ppd = dd->pport + pidx; + if (dd->flags & HFI1_PRESENT) + set_link_state(ppd, HLS_DN_DISABLE); + + if (ppd->statusp) + *ppd->statusp &= ~HFI1_STATUS_IB_READY; + } + } + + /* + * Mark as having had an error for driver, and also + * for /sys and status word mapped to user programs. + * This marks unit as not usable, until reset. + */ + if (dd->status) + dd->status->dev |= HFI1_STATUS_HWERROR; +} + +static void remove_one(struct pci_dev *); +static int init_one(struct pci_dev *, const struct pci_device_id *); +static void shutdown_one(struct pci_dev *); + +#define DRIVER_LOAD_MSG "Cornelis " DRIVER_NAME " loaded: " +#define PFX DRIVER_NAME ": " + +const struct pci_device_id hfi1_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL1) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, hfi1_pci_tbl); + +static struct pci_driver hfi1_pci_driver = { + .name = DRIVER_NAME, + .probe = init_one, + .remove = remove_one, + .shutdown = shutdown_one, + .id_table = hfi1_pci_tbl, + .err_handler = &hfi1_pci_err_handler, +}; + +static void __init compute_krcvqs(void) +{ + int i; + + for (i = 0; i < krcvqsset; i++) + n_krcvqs += krcvqs[i]; +} + +/* + * Do all the generic driver unit- and chip-independent memory + * allocation and initialization. + */ +static int __init hfi1_mod_init(void) +{ + int ret; + + ret = dev_init(); + if (ret) + goto bail; + + ret = node_affinity_init(); + if (ret) + goto bail; + + /* validate max MTU before any devices start */ + if (!valid_opa_max_mtu(hfi1_max_mtu)) { + pr_err("Invalid max_mtu 0x%x, using 0x%x instead\n", + hfi1_max_mtu, HFI1_DEFAULT_MAX_MTU); + hfi1_max_mtu = HFI1_DEFAULT_MAX_MTU; + } + /* valid CUs run from 1-128 in powers of 2 */ + if (hfi1_cu > 128 || !is_power_of_2(hfi1_cu)) + hfi1_cu = 1; + /* valid credit return threshold is 0-100, variable is unsigned */ + if (user_credit_return_threshold > 100) + user_credit_return_threshold = 100; + + compute_krcvqs(); + /* + * sanitize receive interrupt count, time must wait until after + * the hardware type is known + */ + if (rcv_intr_count > RCV_HDR_HEAD_COUNTER_MASK) + rcv_intr_count = RCV_HDR_HEAD_COUNTER_MASK; + /* reject invalid combinations */ + if (rcv_intr_count == 0 && rcv_intr_timeout == 0) { + pr_err("Invalid mode: both receive interrupt count and available timeout are zero - setting interrupt count to 1\n"); + rcv_intr_count = 1; + } + if (rcv_intr_count > 1 && rcv_intr_timeout == 0) { + /* + * Avoid indefinite packet delivery by requiring a timeout + * if count is > 1. + */ + pr_err("Invalid mode: receive interrupt count greater than 1 and available timeout is zero - setting available timeout to 1\n"); + rcv_intr_timeout = 1; + } + if (rcv_intr_dynamic && !(rcv_intr_count > 1 && rcv_intr_timeout > 0)) { + /* + * The dynamic algorithm expects a non-zero timeout + * and a count > 1. + */ + pr_err("Invalid mode: dynamic receive interrupt mitigation with invalid count and timeout - turning dynamic off\n"); + rcv_intr_dynamic = 0; + } + + /* sanitize link CRC options */ + link_crc_mask &= SUPPORTED_CRCS; + + ret = opfn_init(); + if (ret < 0) { + pr_err("Failed to allocate opfn_wq"); + goto bail_dev; + } + + /* + * These must be called before the driver is registered with + * the PCI subsystem. + */ + hfi1_dbg_init(); + ret = pci_register_driver(&hfi1_pci_driver); + if (ret < 0) { + pr_err("Unable to register driver: error %d\n", -ret); + goto bail_dev; + } + goto bail; /* all OK */ + +bail_dev: + hfi1_dbg_exit(); + dev_cleanup(); +bail: + return ret; +} + +module_init(hfi1_mod_init); + +/* + * Do the non-unit driver cleanup, memory free, etc. at unload. + */ +static void __exit hfi1_mod_cleanup(void) +{ + pci_unregister_driver(&hfi1_pci_driver); + opfn_exit(); + node_affinity_destroy_all(); + hfi1_dbg_exit(); + + WARN_ON(!xa_empty(&hfi1_dev_table)); + dispose_firmware(); /* asymmetric with obtain_firmware() */ + dev_cleanup(); +} + +module_exit(hfi1_mod_cleanup); + +/* this can only be called after a successful initialization */ +static void cleanup_device_data(struct hfi1_devdata *dd) +{ + int ctxt; + int pidx; + + /* users can't do anything more with chip */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + struct hfi1_pportdata *ppd = &dd->pport[pidx]; + struct cc_state *cc_state; + int i; + + if (ppd->statusp) + *ppd->statusp &= ~HFI1_STATUS_CHIP_PRESENT; + + for (i = 0; i < OPA_MAX_SLS; i++) + hrtimer_cancel(&ppd->cca_timer[i].hrtimer); + + spin_lock(&ppd->cc_state_lock); + cc_state = get_cc_state_protected(ppd); + RCU_INIT_POINTER(ppd->cc_state, NULL); + spin_unlock(&ppd->cc_state_lock); + + if (cc_state) + kfree_rcu(cc_state, rcu); + } + + free_credit_return(dd); + + /* + * Free any resources still in use (usually just kernel contexts) + * at unload; we do for ctxtcnt, because that's what we allocate. + */ + for (ctxt = 0; dd->rcd && ctxt < dd->num_rcv_contexts; ctxt++) { + struct hfi1_ctxtdata *rcd = dd->rcd[ctxt]; + + if (rcd) { + hfi1_free_ctxt_rcv_groups(rcd); + hfi1_free_ctxt(rcd); + } + } + + kfree(dd->rcd); + dd->rcd = NULL; + + free_pio_map(dd); + /* must follow rcv context free - need to remove rcv's hooks */ + for (ctxt = 0; ctxt < dd->num_send_contexts; ctxt++) + sc_free(dd->send_contexts[ctxt].sc); + dd->num_send_contexts = 0; + kfree(dd->send_contexts); + dd->send_contexts = NULL; + kfree(dd->hw_to_sw); + dd->hw_to_sw = NULL; + kfree(dd->boardname); + vfree(dd->events); + vfree(dd->status); +} + +/* + * Clean up on unit shutdown, or error during unit load after + * successful initialization. + */ +static void postinit_cleanup(struct hfi1_devdata *dd) +{ + hfi1_start_cleanup(dd); + hfi1_comp_vectors_clean_up(dd); + hfi1_dev_affinity_clean_up(dd); + + hfi1_pcie_ddcleanup(dd); + hfi1_pcie_cleanup(dd->pcidev); + + cleanup_device_data(dd); + + hfi1_free_devdata(dd); +} + +static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret = 0, j, pidx, initfail; + struct hfi1_devdata *dd; + struct hfi1_pportdata *ppd; + + /* First, lock the non-writable module parameters */ + HFI1_CAP_LOCK(); + + /* Validate dev ids */ + if (!(ent->device == PCI_DEVICE_ID_INTEL0 || + ent->device == PCI_DEVICE_ID_INTEL1)) { + dev_err(&pdev->dev, "Failing on unknown Intel deviceid 0x%x\n", + ent->device); + ret = -ENODEV; + goto bail; + } + + /* Allocate the dd so we can get to work */ + dd = hfi1_alloc_devdata(pdev, NUM_IB_PORTS * + sizeof(struct hfi1_pportdata)); + if (IS_ERR(dd)) { + ret = PTR_ERR(dd); + goto bail; + } + + /* Validate some global module parameters */ + ret = hfi1_validate_rcvhdrcnt(dd, rcvhdrcnt); + if (ret) + goto bail; + + /* use the encoding function as a sanitization check */ + if (!encode_rcv_header_entry_size(hfi1_hdrq_entsize)) { + dd_dev_err(dd, "Invalid HdrQ Entry size %u\n", + hfi1_hdrq_entsize); + ret = -EINVAL; + goto bail; + } + + /* The receive eager buffer size must be set before the receive + * contexts are created. + * + * Set the eager buffer size. Validate that it falls in a range + * allowed by the hardware - all powers of 2 between the min and + * max. The maximum valid MTU is within the eager buffer range + * so we do not need to cap the max_mtu by an eager buffer size + * setting. + */ + if (eager_buffer_size) { + if (!is_power_of_2(eager_buffer_size)) + eager_buffer_size = + roundup_pow_of_two(eager_buffer_size); + eager_buffer_size = + clamp_val(eager_buffer_size, + MIN_EAGER_BUFFER * 8, + MAX_EAGER_BUFFER_TOTAL); + dd_dev_info(dd, "Eager buffer size %u\n", + eager_buffer_size); + } else { + dd_dev_err(dd, "Invalid Eager buffer size of 0\n"); + ret = -EINVAL; + goto bail; + } + + /* restrict value of hfi1_rcvarr_split */ + hfi1_rcvarr_split = clamp_val(hfi1_rcvarr_split, 0, 100); + + ret = hfi1_pcie_init(dd); + if (ret) + goto bail; + + /* + * Do device-specific initialization, function table setup, dd + * allocation, etc. + */ + ret = hfi1_init_dd(dd); + if (ret) + goto clean_bail; /* error already printed */ + + ret = create_workqueues(dd); + if (ret) + goto clean_bail; + + /* do the generic initialization */ + initfail = hfi1_init(dd, 0); + + ret = hfi1_register_ib_device(dd); + + /* + * Now ready for use. this should be cleared whenever we + * detect a reset, or initiate one. If earlier failure, + * we still create devices, so diags, etc. can be used + * to determine cause of problem. + */ + if (!initfail && !ret) { + dd->flags |= HFI1_INITTED; + /* create debufs files after init and ib register */ + hfi1_dbg_ibdev_init(&dd->verbs_dev); + } + + j = hfi1_device_create(dd); + if (j) + dd_dev_err(dd, "Failed to create /dev devices: %d\n", -j); + + if (initfail || ret) { + msix_clean_up_interrupts(dd); + stop_timers(dd); + flush_workqueue(ib_wq); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + hfi1_quiet_serdes(dd->pport + pidx); + ppd = dd->pport + pidx; + if (ppd->hfi1_wq) { + destroy_workqueue(ppd->hfi1_wq); + ppd->hfi1_wq = NULL; + } + if (ppd->link_wq) { + destroy_workqueue(ppd->link_wq); + ppd->link_wq = NULL; + } + } + if (!j) + hfi1_device_remove(dd); + if (!ret) + hfi1_unregister_ib_device(dd); + postinit_cleanup(dd); + if (initfail) + ret = initfail; + goto bail; /* everything already cleaned */ + } + + sdma_start(dd); + + return 0; + +clean_bail: + hfi1_pcie_cleanup(pdev); +bail: + return ret; +} + +static void wait_for_clients(struct hfi1_devdata *dd) +{ + /* + * Remove the device init value and complete the device if there is + * no clients or wait for active clients to finish. + */ + if (refcount_dec_and_test(&dd->user_refcount)) + complete(&dd->user_comp); + + wait_for_completion(&dd->user_comp); +} + +static void remove_one(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + /* close debugfs files before ib unregister */ + hfi1_dbg_ibdev_exit(&dd->verbs_dev); + + /* remove the /dev hfi1 interface */ + hfi1_device_remove(dd); + + /* wait for existing user space clients to finish */ + wait_for_clients(dd); + + /* unregister from IB core */ + hfi1_unregister_ib_device(dd); + + /* free netdev data */ + hfi1_free_rx(dd); + + /* + * Disable the IB link, disable interrupts on the device, + * clear dma engines, etc. + */ + shutdown_device(dd); + destroy_workqueues(dd); + + stop_timers(dd); + + /* wait until all of our (qsfp) queue_work() calls complete */ + flush_workqueue(ib_wq); + + postinit_cleanup(dd); +} + +static void shutdown_one(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + shutdown_device(dd); +} + +/** + * hfi1_create_rcvhdrq - create a receive header queue + * @dd: the hfi1_ib device + * @rcd: the context data + * + * This must be contiguous memory (from an i/o perspective), and must be + * DMA'able (which means for some systems, it will go through an IOMMU, + * or be forced into a low address range). + */ +int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd) +{ + unsigned amt; + + if (!rcd->rcvhdrq) { + amt = rcvhdrq_size(rcd); + + rcd->rcvhdrq = dma_alloc_coherent(&dd->pcidev->dev, amt, + &rcd->rcvhdrq_dma, + GFP_KERNEL); + + if (!rcd->rcvhdrq) { + dd_dev_err(dd, + "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n", + amt, rcd->ctxt); + goto bail; + } + + if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL) || + HFI1_CAP_UGET_MASK(rcd->flags, DMA_RTAIL)) { + rcd->rcvhdrtail_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, + PAGE_SIZE, + &rcd->rcvhdrqtailaddr_dma, + GFP_KERNEL); + if (!rcd->rcvhdrtail_kvaddr) + goto bail_free; + } + } + + set_hdrq_regs(rcd->dd, rcd->ctxt, rcd->rcvhdrqentsize, + rcd->rcvhdrq_cnt); + + return 0; + +bail_free: + dd_dev_err(dd, + "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n", + rcd->ctxt); + dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq, + rcd->rcvhdrq_dma); + rcd->rcvhdrq = NULL; +bail: + return -ENOMEM; +} + +/** + * hfi1_setup_eagerbufs - llocate eager buffers, both kernel and user + * contexts. + * @rcd: the context we are setting up. + * + * Allocate the eager TID buffers and program them into hip. + * They are no longer completely contiguous, we do multiple allocation + * calls. Otherwise we get the OOM code involved, by asking for too + * much per call, with disastrous results on some kernels. + */ +int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd) +{ + struct hfi1_devdata *dd = rcd->dd; + u32 max_entries, egrtop, alloced_bytes = 0; + u16 order, idx = 0; + int ret = 0; + u16 round_mtu = roundup_pow_of_two(hfi1_max_mtu); + + /* + * The minimum size of the eager buffers is a groups of MTU-sized + * buffers. + * The global eager_buffer_size parameter is checked against the + * theoretical lower limit of the value. Here, we check against the + * MTU. + */ + if (rcd->egrbufs.size < (round_mtu * dd->rcv_entries.group_size)) + rcd->egrbufs.size = round_mtu * dd->rcv_entries.group_size; + /* + * If using one-pkt-per-egr-buffer, lower the eager buffer + * size to the max MTU (page-aligned). + */ + if (!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) + rcd->egrbufs.rcvtid_size = round_mtu; + + /* + * Eager buffers sizes of 1MB or less require smaller TID sizes + * to satisfy the "multiple of 8 RcvArray entries" requirement. + */ + if (rcd->egrbufs.size <= (1 << 20)) + rcd->egrbufs.rcvtid_size = max((unsigned long)round_mtu, + rounddown_pow_of_two(rcd->egrbufs.size / 8)); + + while (alloced_bytes < rcd->egrbufs.size && + rcd->egrbufs.alloced < rcd->egrbufs.count) { + rcd->egrbufs.buffers[idx].addr = + dma_alloc_coherent(&dd->pcidev->dev, + rcd->egrbufs.rcvtid_size, + &rcd->egrbufs.buffers[idx].dma, + GFP_KERNEL); + if (rcd->egrbufs.buffers[idx].addr) { + rcd->egrbufs.buffers[idx].len = + rcd->egrbufs.rcvtid_size; + rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].addr = + rcd->egrbufs.buffers[idx].addr; + rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].dma = + rcd->egrbufs.buffers[idx].dma; + rcd->egrbufs.alloced++; + alloced_bytes += rcd->egrbufs.rcvtid_size; + idx++; + } else { + u32 new_size, i, j; + u64 offset = 0; + + /* + * Fail the eager buffer allocation if: + * - we are already using the lowest acceptable size + * - we are using one-pkt-per-egr-buffer (this implies + * that we are accepting only one size) + */ + if (rcd->egrbufs.rcvtid_size == round_mtu || + !HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) { + dd_dev_err(dd, "ctxt%u: Failed to allocate eager buffers\n", + rcd->ctxt); + ret = -ENOMEM; + goto bail_rcvegrbuf_phys; + } + + new_size = rcd->egrbufs.rcvtid_size / 2; + + /* + * If the first attempt to allocate memory failed, don't + * fail everything but continue with the next lower + * size. + */ + if (idx == 0) { + rcd->egrbufs.rcvtid_size = new_size; + continue; + } + + /* + * Re-partition already allocated buffers to a smaller + * size. + */ + rcd->egrbufs.alloced = 0; + for (i = 0, j = 0, offset = 0; j < idx; i++) { + if (i >= rcd->egrbufs.count) + break; + rcd->egrbufs.rcvtids[i].dma = + rcd->egrbufs.buffers[j].dma + offset; + rcd->egrbufs.rcvtids[i].addr = + rcd->egrbufs.buffers[j].addr + offset; + rcd->egrbufs.alloced++; + if ((rcd->egrbufs.buffers[j].dma + offset + + new_size) == + (rcd->egrbufs.buffers[j].dma + + rcd->egrbufs.buffers[j].len)) { + j++; + offset = 0; + } else { + offset += new_size; + } + } + rcd->egrbufs.rcvtid_size = new_size; + } + } + rcd->egrbufs.numbufs = idx; + rcd->egrbufs.size = alloced_bytes; + + hfi1_cdbg(PROC, + "ctxt%u: Alloced %u rcv tid entries @ %uKB, total %uKB", + rcd->ctxt, rcd->egrbufs.alloced, + rcd->egrbufs.rcvtid_size / 1024, rcd->egrbufs.size / 1024); + + /* + * Set the contexts rcv array head update threshold to the closest + * power of 2 (so we can use a mask instead of modulo) below half + * the allocated entries. + */ + rcd->egrbufs.threshold = + rounddown_pow_of_two(rcd->egrbufs.alloced / 2); + /* + * Compute the expected RcvArray entry base. This is done after + * allocating the eager buffers in order to maximize the + * expected RcvArray entries for the context. + */ + max_entries = rcd->rcv_array_groups * dd->rcv_entries.group_size; + egrtop = roundup(rcd->egrbufs.alloced, dd->rcv_entries.group_size); + rcd->expected_count = max_entries - egrtop; + if (rcd->expected_count > MAX_TID_PAIR_ENTRIES * 2) + rcd->expected_count = MAX_TID_PAIR_ENTRIES * 2; + + rcd->expected_base = rcd->eager_base + egrtop; + hfi1_cdbg(PROC, "ctxt%u: eager:%u, exp:%u, egrbase:%u, expbase:%u", + rcd->ctxt, rcd->egrbufs.alloced, rcd->expected_count, + rcd->eager_base, rcd->expected_base); + + if (!hfi1_rcvbuf_validate(rcd->egrbufs.rcvtid_size, PT_EAGER, &order)) { + hfi1_cdbg(PROC, + "ctxt%u: current Eager buffer size is invalid %u", + rcd->ctxt, rcd->egrbufs.rcvtid_size); + ret = -EINVAL; + goto bail_rcvegrbuf_phys; + } + + for (idx = 0; idx < rcd->egrbufs.alloced; idx++) { + hfi1_put_tid(dd, rcd->eager_base + idx, PT_EAGER, + rcd->egrbufs.rcvtids[idx].dma, order); + cond_resched(); + } + + return 0; + +bail_rcvegrbuf_phys: + for (idx = 0; idx < rcd->egrbufs.alloced && + rcd->egrbufs.buffers[idx].addr; + idx++) { + dma_free_coherent(&dd->pcidev->dev, + rcd->egrbufs.buffers[idx].len, + rcd->egrbufs.buffers[idx].addr, + rcd->egrbufs.buffers[idx].dma); + rcd->egrbufs.buffers[idx].addr = NULL; + rcd->egrbufs.buffers[idx].dma = 0; + rcd->egrbufs.buffers[idx].len = 0; + } + + return ret; +} -- cgit v1.2.3