From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/input/keyboard/nomadik-ske-keypad.c | 378 ++++++++++++++++++++++++++++ 1 file changed, 378 insertions(+) create mode 100644 drivers/input/keyboard/nomadik-ske-keypad.c (limited to 'drivers/input/keyboard/nomadik-ske-keypad.c') diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c new file mode 100644 index 0000000000..b3ccc97f61 --- /dev/null +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Naveen Kumar G for ST-Ericsson + * Author: Sundar Iyer for ST-Ericsson + * + * Keypad controller driver for the SKE (Scroll Key Encoder) module used in + * the Nomadik 8815 and Ux500 platforms. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* SKE_CR bits */ +#define SKE_KPMLT (0x1 << 6) +#define SKE_KPCN (0x7 << 3) +#define SKE_KPASEN (0x1 << 2) +#define SKE_KPASON (0x1 << 7) + +/* SKE_IMSC bits */ +#define SKE_KPIMA (0x1 << 2) + +/* SKE_ICR bits */ +#define SKE_KPICS (0x1 << 3) +#define SKE_KPICA (0x1 << 2) + +/* SKE_RIS bits */ +#define SKE_KPRISA (0x1 << 2) + +#define SKE_KEYPAD_ROW_SHIFT 3 +#define SKE_KPD_NUM_ROWS 8 +#define SKE_KPD_NUM_COLS 8 + +/* keypad auto scan registers */ +#define SKE_ASR0 0x20 +#define SKE_ASR1 0x24 +#define SKE_ASR2 0x28 +#define SKE_ASR3 0x2C + +#define SKE_NUM_ASRX_REGISTERS (4) +#define KEY_PRESSED_DELAY 10 + +/** + * struct ske_keypad - data structure used by keypad driver + * @irq: irq no + * @reg_base: ske registers base address + * @input: pointer to input device object + * @board: keypad platform device + * @keymap: matrix scan code table for keycodes + * @clk: clock structure pointer + * @pclk: clock structure pointer + * @ske_keypad_lock: spinlock protecting the keypad read/writes + */ +struct ske_keypad { + int irq; + void __iomem *reg_base; + struct input_dev *input; + const struct ske_keypad_platform_data *board; + unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; + struct clk *clk; + struct clk *pclk; + spinlock_t ske_keypad_lock; +}; + +static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, + u8 mask, u8 data) +{ + u32 ret; + + spin_lock(&keypad->ske_keypad_lock); + + ret = readl(keypad->reg_base + addr); + ret &= ~mask; + ret |= data; + writel(ret, keypad->reg_base + addr); + + spin_unlock(&keypad->ske_keypad_lock); +} + +/* + * ske_keypad_chip_init: init keypad controller configuration + * + * Enable Multi key press detection, auto scan mode + */ +static int __init ske_keypad_chip_init(struct ske_keypad *keypad) +{ + u32 value; + int timeout = keypad->board->debounce_ms; + + /* check SKE_RIS to be 0 */ + while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) + cpu_relax(); + + if (timeout == -1) + return -EINVAL; + + /* + * set debounce value + * keypad dbounce is configured in DBCR[15:8] + * dbounce value in steps of 32/32.768 ms + */ + spin_lock(&keypad->ske_keypad_lock); + value = readl(keypad->reg_base + SKE_DBCR); + value = value & 0xff; + value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; + writel(value, keypad->reg_base + SKE_DBCR); + spin_unlock(&keypad->ske_keypad_lock); + + /* enable multi key detection */ + ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); + + /* + * set up the number of columns + * KPCN[5:3] defines no. of keypad columns to be auto scanned + */ + value = (keypad->board->kcol - 1) << 3; + ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); + + /* clear keypad interrupt for auto(and pending SW) scans */ + ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); + + /* un-mask keypad interrupts */ + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + /* enable automatic scan */ + ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); + + return 0; +} + +static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) +{ + int row = 0, code, pos; + struct input_dev *input = keypad->input; + u32 ske_ris; + int key_pressed; + int num_of_rows; + + /* find out the row */ + num_of_rows = hweight8(status); + do { + pos = __ffs(status); + row = pos; + status &= ~(1 << pos); + + code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); + ske_ris = readl(keypad->reg_base + SKE_RIS); + key_pressed = ske_ris & SKE_KPRISA; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], key_pressed); + input_sync(input); + num_of_rows--; + } while (num_of_rows); +} + +static void ske_keypad_read_data(struct ske_keypad *keypad) +{ + u8 status; + int col = 0; + int ske_asr, i; + + /* + * Read the auto scan registers + * + * Each SKE_ASRx (x=0 to x=3) contains two row values. + * lower byte contains row value for column 2*x, + * upper byte contains row value for column 2*x + 1 + */ + for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { + ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); + if (!ske_asr) + continue; + + /* now that ASRx is zero, find out the coloumn x and row y */ + status = ske_asr & 0xff; + if (status) { + col = i * 2; + ske_keypad_report(keypad, status, col); + } + status = (ske_asr & 0xff00) >> 8; + if (status) { + col = (i * 2) + 1; + ske_keypad_report(keypad, status, col); + } + } +} + +static irqreturn_t ske_keypad_irq(int irq, void *dev_id) +{ + struct ske_keypad *keypad = dev_id; + int timeout = keypad->board->debounce_ms; + + /* disable auto scan interrupt; mask the interrupt generated */ + ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); + ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); + + while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) + cpu_relax(); + + /* SKEx registers are stable and can be read */ + ske_keypad_read_data(keypad); + + /* wait until raw interrupt is clear */ + while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) + msleep(KEY_PRESSED_DELAY); + + /* enable auto scan interrupts */ + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + return IRQ_HANDLED; +} + +static void ske_keypad_board_exit(void *data) +{ + struct ske_keypad *keypad = data; + + keypad->board->exit(); +} + +static int __init ske_keypad_probe(struct platform_device *pdev) +{ + const struct ske_keypad_platform_data *plat = + dev_get_platdata(&pdev->dev); + struct device *dev = &pdev->dev; + struct ske_keypad *keypad; + struct input_dev *input; + int irq; + int error; + + if (!plat) { + dev_err(&pdev->dev, "invalid keypad platform data\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad = devm_kzalloc(dev, sizeof(struct ske_keypad), + GFP_KERNEL); + input = devm_input_allocate_device(dev); + if (!keypad || !input) { + dev_err(&pdev->dev, "failed to allocate keypad memory\n"); + return -ENOMEM; + } + + keypad->irq = irq; + keypad->board = plat; + keypad->input = input; + spin_lock_init(&keypad->ske_keypad_lock); + + keypad->reg_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(keypad->reg_base)) + return PTR_ERR(keypad->reg_base); + + keypad->pclk = devm_clk_get_enabled(dev, "apb_pclk"); + if (IS_ERR(keypad->pclk)) { + dev_err(&pdev->dev, "failed to get pclk\n"); + return PTR_ERR(keypad->pclk); + } + + keypad->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get clk\n"); + return PTR_ERR(keypad->clk); + } + + input->id.bustype = BUS_HOST; + input->name = "ux500-ske-keypad"; + input->dev.parent = &pdev->dev; + + error = matrix_keypad_build_keymap(plat->keymap_data, NULL, + SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, + keypad->keymap, input); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + return error; + } + + input_set_capability(input, EV_MSC, MSC_SCAN); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + /* go through board initialization helpers */ + if (keypad->board->init) + keypad->board->init(); + + if (keypad->board->exit) { + error = devm_add_action_or_reset(dev, ske_keypad_board_exit, + keypad); + if (error) + return error; + } + + error = ske_keypad_chip_init(keypad); + if (error) { + dev_err(&pdev->dev, "unable to init keypad hardware\n"); + return error; + } + + error = devm_request_threaded_irq(dev, keypad->irq, + NULL, ske_keypad_irq, + IRQF_ONESHOT, "ske-keypad", keypad); + if (error) { + dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", error); + return error; + } + + if (plat->wakeup_enable) + device_init_wakeup(&pdev->dev, true); + + platform_set_drvdata(pdev, keypad); + + return 0; +} + +static int ske_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ske_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + enable_irq_wake(irq); + else + ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); + + return 0; +} + +static int ske_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ske_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + disable_irq_wake(irq); + else + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, + ske_keypad_suspend, ske_keypad_resume); + +static struct platform_driver ske_keypad_driver = { + .driver = { + .name = "nmk-ske-keypad", + .pm = pm_sleep_ptr(&ske_keypad_dev_pm_ops), + }, +}; + +module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Naveen Kumar / Sundar Iyer "); +MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); +MODULE_ALIAS("platform:nomadik-ske-keypad"); -- cgit v1.2.3