From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/input/serio/i8042.c | 1671 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1671 insertions(+) create mode 100644 drivers/input/serio/i8042.c (limited to 'drivers/input/serio/i8042.c') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c new file mode 100644 index 0000000000..6dac7c1853 --- /dev/null +++ b/drivers/input/serio/i8042.c @@ -0,0 +1,1671 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * i8042 keyboard and mouse controller driver for Linux + * + * Copyright (c) 1999-2004 Vojtech Pavlik + */ + + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +MODULE_AUTHOR("Vojtech Pavlik "); +MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver"); +MODULE_LICENSE("GPL"); + +static bool i8042_nokbd; +module_param_named(nokbd, i8042_nokbd, bool, 0); +MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port."); + +static bool i8042_noaux; +module_param_named(noaux, i8042_noaux, bool, 0); +MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); + +static bool i8042_nomux; +module_param_named(nomux, i8042_nomux, bool, 0); +MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present."); + +static bool i8042_unlock; +module_param_named(unlock, i8042_unlock, bool, 0); +MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); + +static bool i8042_probe_defer; +module_param_named(probe_defer, i8042_probe_defer, bool, 0); +MODULE_PARM_DESC(probe_defer, "Allow deferred probing."); + +enum i8042_controller_reset_mode { + I8042_RESET_NEVER, + I8042_RESET_ALWAYS, + I8042_RESET_ON_S2RAM, +#define I8042_RESET_DEFAULT I8042_RESET_ON_S2RAM +}; +static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT; +static int i8042_set_reset(const char *val, const struct kernel_param *kp) +{ + enum i8042_controller_reset_mode *arg = kp->arg; + int error; + bool reset; + + if (val) { + error = kstrtobool(val, &reset); + if (error) + return error; + } else { + reset = true; + } + + *arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER; + return 0; +} + +static const struct kernel_param_ops param_ops_reset_param = { + .flags = KERNEL_PARAM_OPS_FL_NOARG, + .set = i8042_set_reset, +}; +#define param_check_reset_param(name, p) \ + __param_check(name, p, enum i8042_controller_reset_mode) +module_param_named(reset, i8042_reset, reset_param, 0); +MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both"); + +static bool i8042_direct; +module_param_named(direct, i8042_direct, bool, 0); +MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); + +static bool i8042_dumbkbd; +module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); +MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); + +static bool i8042_noloop; +module_param_named(noloop, i8042_noloop, bool, 0); +MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); + +static bool i8042_notimeout; +module_param_named(notimeout, i8042_notimeout, bool, 0); +MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042"); + +static bool i8042_kbdreset; +module_param_named(kbdreset, i8042_kbdreset, bool, 0); +MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port"); + +#ifdef CONFIG_X86 +static bool i8042_dritek; +module_param_named(dritek, i8042_dritek, bool, 0); +MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension"); +#endif + +#ifdef CONFIG_PNP +static bool i8042_nopnp; +module_param_named(nopnp, i8042_nopnp, bool, 0); +MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); +#endif + +#define DEBUG +#ifdef DEBUG +static bool i8042_debug; +module_param_named(debug, i8042_debug, bool, 0600); +MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); + +static bool i8042_unmask_kbd_data; +module_param_named(unmask_kbd_data, i8042_unmask_kbd_data, bool, 0600); +MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive data) of normally sanitize-filtered kbd data traffic debug log [pre-condition: i8042.debug=1 enabled]"); +#endif + +static bool i8042_present; +static bool i8042_bypass_aux_irq_test; +static char i8042_kbd_firmware_id[128]; +static char i8042_aux_firmware_id[128]; +static struct fwnode_handle *i8042_kbd_fwnode; + +#include "i8042.h" + +/* + * i8042_lock protects serialization between i8042_command and + * the interrupt handler. + */ +static DEFINE_SPINLOCK(i8042_lock); + +/* + * Writers to AUX and KBD ports as well as users issuing i8042_command + * directly should acquire i8042_mutex (by means of calling + * i8042_lock_chip() and i8042_unlock_chip() helpers) to ensure that + * they do not disturb each other (unfortunately in many i8042 + * implementations write to one of the ports will immediately abort + * command that is being processed by another port). + */ +static DEFINE_MUTEX(i8042_mutex); + +struct i8042_port { + struct serio *serio; + int irq; + bool exists; + bool driver_bound; + signed char mux; +}; + +#define I8042_KBD_PORT_NO 0 +#define I8042_AUX_PORT_NO 1 +#define I8042_MUX_PORT_NO 2 +#define I8042_NUM_PORTS (I8042_NUM_MUX_PORTS + 2) + +static struct i8042_port i8042_ports[I8042_NUM_PORTS]; + +static unsigned char i8042_initial_ctr; +static unsigned char i8042_ctr; +static bool i8042_mux_present; +static bool i8042_kbd_irq_registered; +static bool i8042_aux_irq_registered; +static unsigned char i8042_suppress_kbd_ack; +static struct platform_device *i8042_platform_device; +static struct notifier_block i8042_kbd_bind_notifier_block; + +static irqreturn_t i8042_interrupt(int irq, void *dev_id); +static bool (*i8042_platform_filter)(unsigned char data, unsigned char str, + struct serio *serio); + +void i8042_lock_chip(void) +{ + mutex_lock(&i8042_mutex); +} +EXPORT_SYMBOL(i8042_lock_chip); + +void i8042_unlock_chip(void) +{ + mutex_unlock(&i8042_mutex); +} +EXPORT_SYMBOL(i8042_unlock_chip); + +int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str, + struct serio *serio)) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + if (i8042_platform_filter) { + ret = -EBUSY; + goto out; + } + + i8042_platform_filter = filter; + +out: + spin_unlock_irqrestore(&i8042_lock, flags); + return ret; +} +EXPORT_SYMBOL(i8042_install_filter); + +int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str, + struct serio *port)) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + if (i8042_platform_filter != filter) { + ret = -EINVAL; + goto out; + } + + i8042_platform_filter = NULL; + +out: + spin_unlock_irqrestore(&i8042_lock, flags); + return ret; +} +EXPORT_SYMBOL(i8042_remove_filter); + +/* + * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to + * be ready for reading values from it / writing values to it. + * Called always with i8042_lock held. + */ + +static int i8042_wait_read(void) +{ + int i = 0; + + while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) { + udelay(50); + i++; + } + return -(i == I8042_CTL_TIMEOUT); +} + +static int i8042_wait_write(void) +{ + int i = 0; + + while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) { + udelay(50); + i++; + } + return -(i == I8042_CTL_TIMEOUT); +} + +/* + * i8042_flush() flushes all data that may be in the keyboard and mouse buffers + * of the i8042 down the toilet. + */ + +static int i8042_flush(void) +{ + unsigned long flags; + unsigned char data, str; + int count = 0; + int retval = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + while ((str = i8042_read_status()) & I8042_STR_OBF) { + if (count++ < I8042_BUFFER_SIZE) { + udelay(50); + data = i8042_read_data(); + dbg("%02x <- i8042 (flush, %s)\n", + data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); + } else { + retval = -EIO; + break; + } + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + return retval; +} + +/* + * i8042_command() executes a command on the i8042. It also sends the input + * parameter(s) of the commands to it, and receives the output value(s). The + * parameters are to be stored in the param array, and the output is placed + * into the same array. The number of the parameters and output values is + * encoded in bits 8-11 of the command number. + */ + +static int __i8042_command(unsigned char *param, int command) +{ + int i, error; + + if (i8042_noloop && command == I8042_CMD_AUX_LOOP) + return -1; + + error = i8042_wait_write(); + if (error) + return error; + + dbg("%02x -> i8042 (command)\n", command & 0xff); + i8042_write_command(command & 0xff); + + for (i = 0; i < ((command >> 12) & 0xf); i++) { + error = i8042_wait_write(); + if (error) { + dbg(" -- i8042 (wait write timeout)\n"); + return error; + } + dbg("%02x -> i8042 (parameter)\n", param[i]); + i8042_write_data(param[i]); + } + + for (i = 0; i < ((command >> 8) & 0xf); i++) { + error = i8042_wait_read(); + if (error) { + dbg(" -- i8042 (wait read timeout)\n"); + return error; + } + + if (command == I8042_CMD_AUX_LOOP && + !(i8042_read_status() & I8042_STR_AUXDATA)) { + dbg(" -- i8042 (auxerr)\n"); + return -1; + } + + param[i] = i8042_read_data(); + dbg("%02x <- i8042 (return)\n", param[i]); + } + + return 0; +} + +int i8042_command(unsigned char *param, int command) +{ + unsigned long flags; + int retval; + + if (!i8042_present) + return -1; + + spin_lock_irqsave(&i8042_lock, flags); + retval = __i8042_command(param, command); + spin_unlock_irqrestore(&i8042_lock, flags); + + return retval; +} +EXPORT_SYMBOL(i8042_command); + +/* + * i8042_kbd_write() sends a byte out through the keyboard interface. + */ + +static int i8042_kbd_write(struct serio *port, unsigned char c) +{ + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + if (!(retval = i8042_wait_write())) { + dbg("%02x -> i8042 (kbd-data)\n", c); + i8042_write_data(c); + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + return retval; +} + +/* + * i8042_aux_write() sends a byte out through the aux interface. + */ + +static int i8042_aux_write(struct serio *serio, unsigned char c) +{ + struct i8042_port *port = serio->port_data; + + return i8042_command(&c, port->mux == -1 ? + I8042_CMD_AUX_SEND : + I8042_CMD_MUX_SEND + port->mux); +} + + +/* + * i8042_port_close attempts to clear AUX or KBD port state by disabling + * and then re-enabling it. + */ + +static void i8042_port_close(struct serio *serio) +{ + int irq_bit; + int disable_bit; + const char *port_name; + + if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) { + irq_bit = I8042_CTR_AUXINT; + disable_bit = I8042_CTR_AUXDIS; + port_name = "AUX"; + } else { + irq_bit = I8042_CTR_KBDINT; + disable_bit = I8042_CTR_KBDDIS; + port_name = "KBD"; + } + + i8042_ctr &= ~irq_bit; + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + pr_warn("Can't write CTR while closing %s port\n", port_name); + + udelay(50); + + i8042_ctr &= ~disable_bit; + i8042_ctr |= irq_bit; + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + pr_err("Can't reactivate %s port\n", port_name); + + /* + * See if there is any data appeared while we were messing with + * port state. + */ + i8042_interrupt(0, NULL); +} + +/* + * i8042_start() is called by serio core when port is about to finish + * registering. It will mark port as existing so i8042_interrupt can + * start sending data through it. + */ +static int i8042_start(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + device_set_wakeup_capable(&serio->dev, true); + + /* + * On platforms using suspend-to-idle, allow the keyboard to + * wake up the system from sleep by enabling keyboard wakeups + * by default. This is consistent with keyboard wakeup + * behavior on many platforms using suspend-to-RAM (ACPI S3) + * by default. + */ + if (pm_suspend_default_s2idle() && + serio == i8042_ports[I8042_KBD_PORT_NO].serio) { + device_set_wakeup_enable(&serio->dev, true); + } + + spin_lock_irq(&i8042_lock); + port->exists = true; + spin_unlock_irq(&i8042_lock); + + return 0; +} + +/* + * i8042_stop() marks serio port as non-existing so i8042_interrupt + * will not try to send data to the port that is about to go away. + * The function is called by serio core as part of unregister procedure. + */ +static void i8042_stop(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + spin_lock_irq(&i8042_lock); + port->exists = false; + port->serio = NULL; + spin_unlock_irq(&i8042_lock); + + /* + * We need to make sure that interrupt handler finishes using + * our serio port before we return from this function. + * We synchronize with both AUX and KBD IRQs because there is + * a (very unlikely) chance that AUX IRQ is raised for KBD port + * and vice versa. + */ + synchronize_irq(I8042_AUX_IRQ); + synchronize_irq(I8042_KBD_IRQ); +} + +/* + * i8042_filter() filters out unwanted bytes from the input data stream. + * It is called from i8042_interrupt and thus is running with interrupts + * off and i8042_lock held. + */ +static bool i8042_filter(unsigned char data, unsigned char str, + struct serio *serio) +{ + if (unlikely(i8042_suppress_kbd_ack)) { + if ((~str & I8042_STR_AUXDATA) && + (data == 0xfa || data == 0xfe)) { + i8042_suppress_kbd_ack--; + dbg("Extra keyboard ACK - filtered out\n"); + return true; + } + } + + if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) { + dbg("Filtered out by platform filter\n"); + return true; + } + + return false; +} + +/* + * i8042_interrupt() is the most important function in this driver - + * it handles the interrupts from the i8042, and sends incoming bytes + * to the upper layers. + */ + +static irqreturn_t i8042_interrupt(int irq, void *dev_id) +{ + struct i8042_port *port; + struct serio *serio; + unsigned long flags; + unsigned char str, data; + unsigned int dfl; + unsigned int port_no; + bool filtered; + int ret = 1; + + spin_lock_irqsave(&i8042_lock, flags); + + str = i8042_read_status(); + if (unlikely(~str & I8042_STR_OBF)) { + spin_unlock_irqrestore(&i8042_lock, flags); + if (irq) + dbg("Interrupt %d, without any data\n", irq); + ret = 0; + goto out; + } + + data = i8042_read_data(); + + if (i8042_mux_present && (str & I8042_STR_AUXDATA)) { + static unsigned long last_transmit; + static unsigned char last_str; + + dfl = 0; + if (str & I8042_STR_MUXERR) { + dbg("MUX error, status is %02x, data is %02x\n", + str, data); +/* + * When MUXERR condition is signalled the data register can only contain + * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately + * it is not always the case. Some KBCs also report 0xfc when there is + * nothing connected to the port while others sometimes get confused which + * port the data came from and signal error leaving the data intact. They + * _do not_ revert to legacy mode (actually I've never seen KBC reverting + * to legacy mode yet, when we see one we'll add proper handling). + * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the + * rest assume that the data came from the same serio last byte + * was transmitted (if transmission happened not too long ago). + */ + + switch (data) { + default: + if (time_before(jiffies, last_transmit + HZ/10)) { + str = last_str; + break; + } + fallthrough; /* report timeout */ + case 0xfc: + case 0xfd: + case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break; + case 0xff: dfl = SERIO_PARITY; data = 0xfe; break; + } + } + + port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3); + last_str = str; + last_transmit = jiffies; + } else { + + dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) | + ((str & I8042_STR_TIMEOUT && !i8042_notimeout) ? SERIO_TIMEOUT : 0); + + port_no = (str & I8042_STR_AUXDATA) ? + I8042_AUX_PORT_NO : I8042_KBD_PORT_NO; + } + + port = &i8042_ports[port_no]; + serio = port->exists ? port->serio : NULL; + + filter_dbg(port->driver_bound, data, "<- i8042 (interrupt, %d, %d%s%s)\n", + port_no, irq, + dfl & SERIO_PARITY ? ", bad parity" : "", + dfl & SERIO_TIMEOUT ? ", timeout" : ""); + + filtered = i8042_filter(data, str, serio); + + spin_unlock_irqrestore(&i8042_lock, flags); + + if (likely(serio && !filtered)) + serio_interrupt(serio, data, dfl); + + out: + return IRQ_RETVAL(ret); +} + +/* + * i8042_enable_kbd_port enables keyboard port on chip + */ + +static int i8042_enable_kbd_port(void) +{ + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + pr_err("Failed to enable KBD port\n"); + return -EIO; + } + + return 0; +} + +/* + * i8042_enable_aux_port enables AUX (mouse) port on chip + */ + +static int i8042_enable_aux_port(void) +{ + i8042_ctr &= ~I8042_CTR_AUXDIS; + i8042_ctr |= I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_AUXINT; + i8042_ctr |= I8042_CTR_AUXDIS; + pr_err("Failed to enable AUX port\n"); + return -EIO; + } + + return 0; +} + +/* + * i8042_enable_mux_ports enables 4 individual AUX ports after + * the controller has been switched into Multiplexed mode + */ + +static int i8042_enable_mux_ports(void) +{ + unsigned char param; + int i; + + for (i = 0; i < I8042_NUM_MUX_PORTS; i++) { + i8042_command(¶m, I8042_CMD_MUX_PFX + i); + i8042_command(¶m, I8042_CMD_AUX_ENABLE); + } + + return i8042_enable_aux_port(); +} + +/* + * i8042_set_mux_mode checks whether the controller has an + * active multiplexor and puts the chip into Multiplexed (true) + * or Legacy (false) mode. + */ + +static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version) +{ + + unsigned char param, val; +/* + * Get rid of bytes in the queue. + */ + + i8042_flush(); + +/* + * Internal loopback test - send three bytes, they should come back from the + * mouse interface, the last should be version. + */ + + param = val = 0xf0; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) + return -1; + param = val = multiplex ? 0x56 : 0xf6; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) + return -1; + param = val = multiplex ? 0xa4 : 0xa5; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == val) + return -1; + +/* + * Workaround for interference with USB Legacy emulation + * that causes a v10.12 MUX to be found. + */ + if (param == 0xac) + return -1; + + if (mux_version) + *mux_version = param; + + return 0; +} + +/* + * i8042_check_mux() checks whether the controller supports the PS/2 Active + * Multiplexing specification by Synaptics, Phoenix, Insyde and + * LCS/Telegraphics. + */ + +static int i8042_check_mux(void) +{ + unsigned char mux_version; + + if (i8042_set_mux_mode(true, &mux_version)) + return -1; + + pr_info("Detected active multiplexing controller, rev %d.%d\n", + (mux_version >> 4) & 0xf, mux_version & 0xf); + +/* + * Disable all muxed ports by disabling AUX. + */ + i8042_ctr |= I8042_CTR_AUXDIS; + i8042_ctr &= ~I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + pr_err("Failed to disable AUX port, can't use MUX\n"); + return -EIO; + } + + i8042_mux_present = true; + + return 0; +} + +/* + * The following is used to test AUX IRQ delivery. + */ +static struct completion i8042_aux_irq_delivered; +static bool i8042_irq_being_tested; + +static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id) +{ + unsigned long flags; + unsigned char str, data; + int ret = 0; + + spin_lock_irqsave(&i8042_lock, flags); + str = i8042_read_status(); + if (str & I8042_STR_OBF) { + data = i8042_read_data(); + dbg("%02x <- i8042 (aux_test_irq, %s)\n", + data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); + if (i8042_irq_being_tested && + data == 0xa5 && (str & I8042_STR_AUXDATA)) + complete(&i8042_aux_irq_delivered); + ret = 1; + } + spin_unlock_irqrestore(&i8042_lock, flags); + + return IRQ_RETVAL(ret); +} + +/* + * i8042_toggle_aux - enables or disables AUX port on i8042 via command and + * verifies success by readinng CTR. Used when testing for presence of AUX + * port. + */ +static int i8042_toggle_aux(bool on) +{ + unsigned char param; + int i; + + if (i8042_command(¶m, + on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE)) + return -1; + + /* some chips need some time to set the I8042_CTR_AUXDIS bit */ + for (i = 0; i < 100; i++) { + udelay(50); + + if (i8042_command(¶m, I8042_CMD_CTL_RCTR)) + return -1; + + if (!(param & I8042_CTR_AUXDIS) == on) + return 0; + } + + return -1; +} + +/* + * i8042_check_aux() applies as much paranoia as it can at detecting + * the presence of an AUX interface. + */ + +static int i8042_check_aux(void) +{ + int retval = -1; + bool irq_registered = false; + bool aux_loop_broken = false; + unsigned long flags; + unsigned char param; + +/* + * Get rid of bytes in the queue. + */ + + i8042_flush(); + +/* + * Internal loopback test - filters out AT-type i8042's. Unfortunately + * SiS screwed up and their 5597 doesn't support the LOOP command even + * though it has an AUX port. + */ + + param = 0x5a; + retval = i8042_command(¶m, I8042_CMD_AUX_LOOP); + if (retval || param != 0x5a) { + +/* + * External connection test - filters out AT-soldered PS/2 i8042's + * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error + * 0xfa - no error on some notebooks which ignore the spec + * Because it's common for chipsets to return error on perfectly functioning + * AUX ports, we test for this only when the LOOP command failed. + */ + + if (i8042_command(¶m, I8042_CMD_AUX_TEST) || + (param && param != 0xfa && param != 0xff)) + return -1; + +/* + * If AUX_LOOP completed without error but returned unexpected data + * mark it as broken + */ + if (!retval) + aux_loop_broken = true; + } + +/* + * Bit assignment test - filters out PS/2 i8042's in AT mode + */ + + if (i8042_toggle_aux(false)) { + pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); + pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n"); + } + + if (i8042_toggle_aux(true)) + return -1; + +/* + * Reset keyboard (needed on some laptops to successfully detect + * touchpad, e.g., some Gigabyte laptop models with Elantech + * touchpads). + */ + if (i8042_kbdreset) { + pr_warn("Attempting to reset device connected to KBD port\n"); + i8042_kbd_write(NULL, (unsigned char) 0xff); + } + +/* + * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and + * used it for a PCI card or somethig else. + */ + + if (i8042_noloop || i8042_bypass_aux_irq_test || aux_loop_broken) { +/* + * Without LOOP command we can't test AUX IRQ delivery. Assume the port + * is working and hope we are right. + */ + retval = 0; + goto out; + } + + if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED, + "i8042", i8042_platform_device)) + goto out; + + irq_registered = true; + + if (i8042_enable_aux_port()) + goto out; + + spin_lock_irqsave(&i8042_lock, flags); + + init_completion(&i8042_aux_irq_delivered); + i8042_irq_being_tested = true; + + param = 0xa5; + retval = __i8042_command(¶m, I8042_CMD_AUX_LOOP & 0xf0ff); + + spin_unlock_irqrestore(&i8042_lock, flags); + + if (retval) + goto out; + + if (wait_for_completion_timeout(&i8042_aux_irq_delivered, + msecs_to_jiffies(250)) == 0) { +/* + * AUX IRQ was never delivered so we need to flush the controller to + * get rid of the byte we put there; otherwise keyboard may not work. + */ + dbg(" -- i8042 (aux irq test timeout)\n"); + i8042_flush(); + retval = -1; + } + + out: + +/* + * Disable the interface. + */ + + i8042_ctr |= I8042_CTR_AUXDIS; + i8042_ctr &= ~I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + retval = -1; + + if (irq_registered) + free_irq(I8042_AUX_IRQ, i8042_platform_device); + + return retval; +} + +static int i8042_controller_check(void) +{ + if (i8042_flush()) { + pr_info("No controller found\n"); + return -ENODEV; + } + + return 0; +} + +static int i8042_controller_selftest(void) +{ + unsigned char param; + int i = 0; + + /* + * We try this 5 times; on some really fragile systems this does not + * take the first time... + */ + do { + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + pr_err("i8042 controller selftest timeout\n"); + return -ENODEV; + } + + if (param == I8042_RET_CTL_TEST) + return 0; + + dbg("i8042 controller selftest: %#x != %#x\n", + param, I8042_RET_CTL_TEST); + msleep(50); + } while (i++ < 5); + +#ifdef CONFIG_X86 + /* + * On x86, we don't fail entire i8042 initialization if controller + * reset fails in hopes that keyboard port will still be functional + * and user will still get a working keyboard. This is especially + * important on netbooks. On other arches we trust hardware more. + */ + pr_info("giving up on controller selftest, continuing anyway...\n"); + return 0; +#else + pr_err("i8042 controller selftest failed\n"); + return -EIO; +#endif +} + +/* + * i8042_controller_init initializes the i8042 controller, and, + * most importantly, sets it into non-xlated mode if that's + * desired. + */ + +static int i8042_controller_init(void) +{ + unsigned long flags; + int n = 0; + unsigned char ctr[2]; + +/* + * Save the CTR for restore on unload / reboot. + */ + + do { + if (n >= 10) { + pr_err("Unable to get stable CTR read\n"); + return -EIO; + } + + if (n != 0) + udelay(50); + + if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) { + pr_err("Can't read CTR while initializing i8042\n"); + return i8042_probe_defer ? -EPROBE_DEFER : -EIO; + } + + } while (n < 2 || ctr[0] != ctr[1]); + + i8042_initial_ctr = i8042_ctr = ctr[0]; + +/* + * Disable the keyboard interface and interrupt. + */ + + i8042_ctr |= I8042_CTR_KBDDIS; + i8042_ctr &= ~I8042_CTR_KBDINT; + +/* + * Handle keylock. + */ + + spin_lock_irqsave(&i8042_lock, flags); + if (~i8042_read_status() & I8042_STR_KEYLOCK) { + if (i8042_unlock) + i8042_ctr |= I8042_CTR_IGNKEYLOCK; + else + pr_warn("Warning: Keylock active\n"); + } + spin_unlock_irqrestore(&i8042_lock, flags); + +/* + * If the chip is configured into nontranslated mode by the BIOS, don't + * bother enabling translating and be happy. + */ + + if (~i8042_ctr & I8042_CTR_XLATE) + i8042_direct = true; + +/* + * Set nontranslated mode for the kbd interface if requested by an option. + * After this the kbd interface becomes a simple serial in/out, like the aux + * interface is. We don't do this by default, since it can confuse notebook + * BIOSes. + */ + + if (i8042_direct) + i8042_ctr &= ~I8042_CTR_XLATE; + +/* + * Write CTR back. + */ + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + pr_err("Can't write CTR while initializing i8042\n"); + return -EIO; + } + +/* + * Flush whatever accumulated while we were disabling keyboard port. + */ + + i8042_flush(); + + return 0; +} + + +/* + * Reset the controller and reset CRT to the original value set by BIOS. + */ + +static void i8042_controller_reset(bool s2r_wants_reset) +{ + i8042_flush(); + +/* + * Disable both KBD and AUX interfaces so they don't get in the way + */ + + i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; + i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + pr_warn("Can't write CTR while resetting\n"); + +/* + * Disable MUX mode if present. + */ + + if (i8042_mux_present) + i8042_set_mux_mode(false, NULL); + +/* + * Reset the controller if requested. + */ + + if (i8042_reset == I8042_RESET_ALWAYS || + (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) { + i8042_controller_selftest(); + } + +/* + * Restore the original control register setting. + */ + + if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + pr_warn("Can't restore CTR\n"); +} + + +/* + * i8042_panic_blink() will turn the keyboard LEDs on or off and is called + * when kernel panics. Flashing LEDs is useful for users running X who may + * not see the console and will help distinguishing panics from "real" + * lockups. + * + * Note that DELAY has a limit of 10ms so we will not get stuck here + * waiting for KBC to free up even if KBD interrupt is off + */ + +#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0) + +static long i8042_panic_blink(int state) +{ + long delay = 0; + char led; + + led = (state) ? 0x01 | 0x04 : 0; + while (i8042_read_status() & I8042_STR_IBF) + DELAY; + dbg("%02x -> i8042 (panic blink)\n", 0xed); + i8042_suppress_kbd_ack = 2; + i8042_write_data(0xed); /* set leds */ + DELAY; + while (i8042_read_status() & I8042_STR_IBF) + DELAY; + DELAY; + dbg("%02x -> i8042 (panic blink)\n", led); + i8042_write_data(led); + DELAY; + return delay; +} + +#undef DELAY + +#ifdef CONFIG_X86 +static void i8042_dritek_enable(void) +{ + unsigned char param = 0x90; + int error; + + error = i8042_command(¶m, 0x1059); + if (error) + pr_warn("Failed to enable DRITEK extension: %d\n", error); +} +#endif + +#ifdef CONFIG_PM + +/* + * Here we try to reset everything back to a state we had + * before suspending. + */ + +static int i8042_controller_resume(bool s2r_wants_reset) +{ + int error; + + error = i8042_controller_check(); + if (error) + return error; + + if (i8042_reset == I8042_RESET_ALWAYS || + (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) { + error = i8042_controller_selftest(); + if (error) + return error; + } + +/* + * Restore original CTR value and disable all ports + */ + + i8042_ctr = i8042_initial_ctr; + if (i8042_direct) + i8042_ctr &= ~I8042_CTR_XLATE; + i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; + i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + pr_warn("Can't write CTR to resume, retrying...\n"); + msleep(50); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + pr_err("CTR write retry failed\n"); + return -EIO; + } + } + + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + + if (i8042_mux_present) { + if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports()) + pr_warn("failed to resume active multiplexor, mouse won't work\n"); + } else if (i8042_ports[I8042_AUX_PORT_NO].serio) + i8042_enable_aux_port(); + + if (i8042_ports[I8042_KBD_PORT_NO].serio) + i8042_enable_kbd_port(); + + i8042_interrupt(0, NULL); + + return 0; +} + +/* + * Here we try to restore the original BIOS settings to avoid + * upsetting it. + */ + +static int i8042_pm_suspend(struct device *dev) +{ + int i; + + if (pm_suspend_via_firmware()) + i8042_controller_reset(true); + + /* Set up serio interrupts for system wakeup. */ + for (i = 0; i < I8042_NUM_PORTS; i++) { + struct serio *serio = i8042_ports[i].serio; + + if (serio && device_may_wakeup(&serio->dev)) + enable_irq_wake(i8042_ports[i].irq); + } + + return 0; +} + +static int i8042_pm_resume_noirq(struct device *dev) +{ + if (!pm_resume_via_firmware()) + i8042_interrupt(0, NULL); + + return 0; +} + +static int i8042_pm_resume(struct device *dev) +{ + bool want_reset; + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) { + struct serio *serio = i8042_ports[i].serio; + + if (serio && device_may_wakeup(&serio->dev)) + disable_irq_wake(i8042_ports[i].irq); + } + + /* + * If platform firmware was not going to be involved in suspend, we did + * not restore the controller state to whatever it had been at boot + * time, so we do not need to do anything. + */ + if (!pm_suspend_via_firmware()) + return 0; + + /* + * We only need to reset the controller if we are resuming after handing + * off control to the platform firmware, otherwise we can simply restore + * the mode. + */ + want_reset = pm_resume_via_firmware(); + + return i8042_controller_resume(want_reset); +} + +static int i8042_pm_thaw(struct device *dev) +{ + i8042_interrupt(0, NULL); + + return 0; +} + +static int i8042_pm_reset(struct device *dev) +{ + i8042_controller_reset(false); + + return 0; +} + +static int i8042_pm_restore(struct device *dev) +{ + return i8042_controller_resume(false); +} + +static const struct dev_pm_ops i8042_pm_ops = { + .suspend = i8042_pm_suspend, + .resume_noirq = i8042_pm_resume_noirq, + .resume = i8042_pm_resume, + .thaw = i8042_pm_thaw, + .poweroff = i8042_pm_reset, + .restore = i8042_pm_restore, +}; + +#endif /* CONFIG_PM */ + +/* + * We need to reset the 8042 back to original mode on system shutdown, + * because otherwise BIOSes will be confused. + */ + +static void i8042_shutdown(struct platform_device *dev) +{ + i8042_controller_reset(false); +} + +static int i8042_create_kbd_port(void) +{ + struct serio *serio; + struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO]; + + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + serio->id.type = i8042_direct ? SERIO_8042 : SERIO_8042_XL; + serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->close = i8042_port_close; + serio->ps2_cmd_mutex = &i8042_mutex; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + strscpy(serio->name, "i8042 KBD port", sizeof(serio->name)); + strscpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys)); + strscpy(serio->firmware_id, i8042_kbd_firmware_id, + sizeof(serio->firmware_id)); + set_primary_fwnode(&serio->dev, i8042_kbd_fwnode); + + port->serio = serio; + port->irq = I8042_KBD_IRQ; + + return 0; +} + +static int i8042_create_aux_port(int idx) +{ + struct serio *serio; + int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx; + struct i8042_port *port = &i8042_ports[port_no]; + + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + serio->id.type = SERIO_8042; + serio->write = i8042_aux_write; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->ps2_cmd_mutex = &i8042_mutex; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + if (idx < 0) { + strscpy(serio->name, "i8042 AUX port", sizeof(serio->name)); + strscpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); + strscpy(serio->firmware_id, i8042_aux_firmware_id, + sizeof(serio->firmware_id)); + serio->close = i8042_port_close; + } else { + snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); + snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1); + strscpy(serio->firmware_id, i8042_aux_firmware_id, + sizeof(serio->firmware_id)); + } + + port->serio = serio; + port->mux = idx; + port->irq = I8042_AUX_IRQ; + + return 0; +} + +static void i8042_free_kbd_port(void) +{ + kfree(i8042_ports[I8042_KBD_PORT_NO].serio); + i8042_ports[I8042_KBD_PORT_NO].serio = NULL; +} + +static void i8042_free_aux_ports(void) +{ + int i; + + for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) { + kfree(i8042_ports[i].serio); + i8042_ports[i].serio = NULL; + } +} + +static void i8042_register_ports(void) +{ + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) { + struct serio *serio = i8042_ports[i].serio; + + if (!serio) + continue; + + printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n", + serio->name, + (unsigned long) I8042_DATA_REG, + (unsigned long) I8042_COMMAND_REG, + i8042_ports[i].irq); + serio_register_port(serio); + } +} + +static void i8042_unregister_ports(void) +{ + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) { + if (i8042_ports[i].serio) { + serio_unregister_port(i8042_ports[i].serio); + i8042_ports[i].serio = NULL; + } + } +} + +static void i8042_free_irqs(void) +{ + if (i8042_aux_irq_registered) + free_irq(I8042_AUX_IRQ, i8042_platform_device); + if (i8042_kbd_irq_registered) + free_irq(I8042_KBD_IRQ, i8042_platform_device); + + i8042_aux_irq_registered = i8042_kbd_irq_registered = false; +} + +static int i8042_setup_aux(void) +{ + int (*aux_enable)(void); + int error; + int i; + + if (i8042_check_aux()) + return -ENODEV; + + if (i8042_nomux || i8042_check_mux()) { + error = i8042_create_aux_port(-1); + if (error) + goto err_free_ports; + aux_enable = i8042_enable_aux_port; + } else { + for (i = 0; i < I8042_NUM_MUX_PORTS; i++) { + error = i8042_create_aux_port(i); + if (error) + goto err_free_ports; + } + aux_enable = i8042_enable_mux_ports; + } + + error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED, + "i8042", i8042_platform_device); + if (error) + goto err_free_ports; + + error = aux_enable(); + if (error) + goto err_free_irq; + + i8042_aux_irq_registered = true; + return 0; + + err_free_irq: + free_irq(I8042_AUX_IRQ, i8042_platform_device); + err_free_ports: + i8042_free_aux_ports(); + return error; +} + +static int i8042_setup_kbd(void) +{ + int error; + + error = i8042_create_kbd_port(); + if (error) + return error; + + error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED, + "i8042", i8042_platform_device); + if (error) + goto err_free_port; + + error = i8042_enable_kbd_port(); + if (error) + goto err_free_irq; + + i8042_kbd_irq_registered = true; + return 0; + + err_free_irq: + free_irq(I8042_KBD_IRQ, i8042_platform_device); + err_free_port: + i8042_free_kbd_port(); + return error; +} + +static int i8042_kbd_bind_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct serio *serio = to_serio_port(dev); + struct i8042_port *port = serio->port_data; + + if (serio != i8042_ports[I8042_KBD_PORT_NO].serio) + return 0; + + switch (action) { + case BUS_NOTIFY_BOUND_DRIVER: + port->driver_bound = true; + break; + + case BUS_NOTIFY_UNBIND_DRIVER: + port->driver_bound = false; + break; + } + + return 0; +} + +static int i8042_probe(struct platform_device *dev) +{ + int error; + + if (i8042_reset == I8042_RESET_ALWAYS) { + error = i8042_controller_selftest(); + if (error) + return error; + } + + error = i8042_controller_init(); + if (error) + return error; + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + + if (!i8042_noaux) { + error = i8042_setup_aux(); + if (error && error != -ENODEV && error != -EBUSY) + goto out_fail; + } + + if (!i8042_nokbd) { + error = i8042_setup_kbd(); + if (error) + goto out_fail; + } +/* + * Ok, everything is ready, let's register all serio ports + */ + i8042_register_ports(); + + return 0; + + out_fail: + i8042_free_aux_ports(); /* in case KBD failed but AUX not */ + i8042_free_irqs(); + i8042_controller_reset(false); + + return error; +} + +static int i8042_remove(struct platform_device *dev) +{ + i8042_unregister_ports(); + i8042_free_irqs(); + i8042_controller_reset(false); + + return 0; +} + +static struct platform_driver i8042_driver = { + .driver = { + .name = "i8042", +#ifdef CONFIG_PM + .pm = &i8042_pm_ops, +#endif + }, + .probe = i8042_probe, + .remove = i8042_remove, + .shutdown = i8042_shutdown, +}; + +static struct notifier_block i8042_kbd_bind_notifier_block = { + .notifier_call = i8042_kbd_bind_notifier, +}; + +static int __init i8042_init(void) +{ + int err; + + dbg_init(); + + err = i8042_platform_init(); + if (err) + return (err == -ENODEV) ? 0 : err; + + err = i8042_controller_check(); + if (err) + goto err_platform_exit; + + /* Set this before creating the dev to allow i8042_command to work right away */ + i8042_present = true; + + err = platform_driver_register(&i8042_driver); + if (err) + goto err_platform_exit; + + i8042_platform_device = platform_device_alloc("i8042", -1); + if (!i8042_platform_device) { + err = -ENOMEM; + goto err_unregister_driver; + } + + err = platform_device_add(i8042_platform_device); + if (err) + goto err_free_device; + + bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block); + panic_blink = i8042_panic_blink; + + return 0; + +err_free_device: + platform_device_put(i8042_platform_device); +err_unregister_driver: + platform_driver_unregister(&i8042_driver); + err_platform_exit: + i8042_platform_exit(); + return err; +} + +static void __exit i8042_exit(void) +{ + if (!i8042_present) + return; + + platform_device_unregister(i8042_platform_device); + platform_driver_unregister(&i8042_driver); + i8042_platform_exit(); + + bus_unregister_notifier(&serio_bus, &i8042_kbd_bind_notifier_block); + panic_blink = NULL; +} + +module_init(i8042_init); +module_exit(i8042_exit); -- cgit v1.2.3