From 01a69402cf9d38ff180345d55c2ee51c7e89fbc7 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:50:03 +0200 Subject: Adding upstream version 6.8.9. Signed-off-by: Daniel Baumann --- drivers/input/input.c | 8 +- drivers/input/joystick/Kconfig | 10 + drivers/input/joystick/Makefile | 1 + drivers/input/joystick/adafruit-seesaw.c | 315 +++++++++++++++++++++++++++ drivers/input/joystick/as5011.c | 24 +-- drivers/input/joystick/pxrc.c | 42 ++-- drivers/input/joystick/xpad.c | 9 +- drivers/input/keyboard/atkbd.c | 3 +- drivers/input/keyboard/cap11xx.c | 253 +++++++++++++++++----- drivers/input/keyboard/gpio_keys.c | 75 ++++++- drivers/input/keyboard/omap-keypad.c | 19 +- drivers/input/keyboard/omap4-keypad.c | 15 +- drivers/input/keyboard/qt1050.c | 2 +- drivers/input/keyboard/tca6416-keypad.c | 1 - drivers/input/misc/da7280.c | 4 +- drivers/input/misc/da9063_onkey.c | 69 +++--- drivers/input/misc/ims-pcu.c | 10 +- drivers/input/misc/iqs269a.c | 335 +++++++++++++++++++++++++---- drivers/input/misc/max77693-haptic.c | 14 +- drivers/input/misc/pwm-beeper.c | 4 +- drivers/input/misc/pwm-vibra.c | 8 +- drivers/input/mouse/cyapa.c | 22 +- drivers/input/mouse/cyapa_gen3.c | 2 +- drivers/input/mouse/cyapa_gen5.c | 4 +- drivers/input/mouse/cyapa_gen6.c | 20 +- drivers/input/mouse/elan_i2c_core.c | 18 +- drivers/input/mouse/navpoint.c | 41 ++-- drivers/input/rmi4/rmi_driver.c | 12 +- drivers/input/rmi4/rmi_f01.c | 13 +- drivers/input/rmi4/rmi_spi.c | 2 +- drivers/input/touchscreen/atmel_mxt_ts.c | 23 +- drivers/input/touchscreen/edt-ft5x06.c | 2 +- drivers/input/touchscreen/hideep.c | 6 +- drivers/input/touchscreen/hycon-hy46xx.c | 2 +- drivers/input/touchscreen/ilitek_ts_i2c.c | 16 +- drivers/input/touchscreen/imagis.c | 20 +- drivers/input/touchscreen/iqs5xx.c | 12 +- drivers/input/touchscreen/iqs7211.c | 12 +- drivers/input/touchscreen/melfas_mip4.c | 16 +- drivers/input/touchscreen/sur40.c | 7 +- drivers/input/touchscreen/usbtouchscreen.c | 4 +- drivers/input/touchscreen/wdt87xx_i2c.c | 6 +- drivers/input/touchscreen/zforce_ts.c | 34 ++- drivers/input/vivaldi-fmap.c | 6 +- 44 files changed, 1129 insertions(+), 392 deletions(-) create mode 100644 drivers/input/joystick/adafruit-seesaw.c (limited to 'drivers/input') diff --git a/drivers/input/input.c b/drivers/input/input.c index 8c5fdb0f85..f71ea4fb17 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1365,8 +1365,8 @@ static ssize_t input_dev_show_##name(struct device *dev, \ { \ struct input_dev *input_dev = to_input_dev(dev); \ \ - return scnprintf(buf, PAGE_SIZE, "%s\n", \ - input_dev->name ? input_dev->name : ""); \ + return sysfs_emit(buf, "%s\n", \ + input_dev->name ? input_dev->name : ""); \ } \ static DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL) @@ -1458,7 +1458,7 @@ static ssize_t inhibited_show(struct device *dev, { struct input_dev *input_dev = to_input_dev(dev); - return scnprintf(buf, PAGE_SIZE, "%d\n", input_dev->inhibited); + return sysfs_emit(buf, "%d\n", input_dev->inhibited); } static ssize_t inhibited_store(struct device *dev, @@ -1505,7 +1505,7 @@ static ssize_t input_dev_show_id_##name(struct device *dev, \ char *buf) \ { \ struct input_dev *input_dev = to_input_dev(dev); \ - return scnprintf(buf, PAGE_SIZE, "%04x\n", input_dev->id.name); \ + return sysfs_emit(buf, "%04x\n", input_dev->id.name); \ } \ static DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL) diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index ac6925ce83..7755e5b454 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -412,4 +412,14 @@ config JOYSTICK_SENSEHAT To compile this driver as a module, choose M here: the module will be called sensehat_joystick. +config JOYSTICK_SEESAW + tristate "Adafruit Mini I2C Gamepad with Seesaw" + depends on I2C + select INPUT_SPARSEKMAP + help + Say Y here if you want to use the Adafruit Mini I2C Gamepad. + + To compile this driver as a module, choose M here: the module will be + called adafruit-seesaw. + endif diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 3937535f00..9976f596a9 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_JOYSTICK_N64) += n64joy.o obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o obj-$(CONFIG_JOYSTICK_QWIIC) += qwiic-joystick.o +obj-$(CONFIG_JOYSTICK_SEESAW) += adafruit-seesaw.o obj-$(CONFIG_JOYSTICK_SENSEHAT) += sensehat-joystick.o obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o diff --git a/drivers/input/joystick/adafruit-seesaw.c b/drivers/input/joystick/adafruit-seesaw.c new file mode 100644 index 0000000000..1b9279f024 --- /dev/null +++ b/drivers/input/joystick/adafruit-seesaw.c @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2023 Anshul Dalal + * + * Driver for Adafruit Mini I2C Gamepad + * + * Based on the work of: + * Oleh Kravchenko (Sparkfun Qwiic Joystick driver) + * + * Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf + * Product page: https://www.adafruit.com/product/5743 + * Firmware and hardware sources: https://github.com/adafruit/Adafruit_Seesaw + * + * TODO: + * - Add interrupt support + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SEESAW_DEVICE_NAME "seesaw-gamepad" + +#define SEESAW_ADC_BASE 0x0900 + +#define SEESAW_GPIO_DIRCLR_BULK 0x0103 +#define SEESAW_GPIO_BULK 0x0104 +#define SEESAW_GPIO_BULK_SET 0x0105 +#define SEESAW_GPIO_PULLENSET 0x010b + +#define SEESAW_STATUS_HW_ID 0x0001 +#define SEESAW_STATUS_SWRST 0x007f + +#define SEESAW_ADC_OFFSET 0x07 + +#define SEESAW_BUTTON_A 0x05 +#define SEESAW_BUTTON_B 0x01 +#define SEESAW_BUTTON_X 0x06 +#define SEESAW_BUTTON_Y 0x02 +#define SEESAW_BUTTON_START 0x10 +#define SEESAW_BUTTON_SELECT 0x00 + +#define SEESAW_ANALOG_X 0x0e +#define SEESAW_ANALOG_Y 0x0f + +#define SEESAW_JOYSTICK_MAX_AXIS 1023 +#define SEESAW_JOYSTICK_FUZZ 2 +#define SEESAW_JOYSTICK_FLAT 4 + +#define SEESAW_GAMEPAD_POLL_INTERVAL_MS 16 +#define SEESAW_GAMEPAD_POLL_MIN 8 +#define SEESAW_GAMEPAD_POLL_MAX 32 + +static const unsigned long SEESAW_BUTTON_MASK = + BIT(SEESAW_BUTTON_A) | BIT(SEESAW_BUTTON_B) | BIT(SEESAW_BUTTON_X) | + BIT(SEESAW_BUTTON_Y) | BIT(SEESAW_BUTTON_START) | + BIT(SEESAW_BUTTON_SELECT); + +struct seesaw_gamepad { + struct input_dev *input_dev; + struct i2c_client *i2c_client; +}; + +struct seesaw_data { + u16 x; + u16 y; + u32 button_state; +}; + +static const struct key_entry seesaw_buttons_new[] = { + { KE_KEY, SEESAW_BUTTON_A, .keycode = BTN_SOUTH }, + { KE_KEY, SEESAW_BUTTON_B, .keycode = BTN_EAST }, + { KE_KEY, SEESAW_BUTTON_X, .keycode = BTN_NORTH }, + { KE_KEY, SEESAW_BUTTON_Y, .keycode = BTN_WEST }, + { KE_KEY, SEESAW_BUTTON_START, .keycode = BTN_START }, + { KE_KEY, SEESAW_BUTTON_SELECT, .keycode = BTN_SELECT }, + { KE_END, 0 } +}; + +static int seesaw_register_read(struct i2c_client *client, u16 reg, void *buf, + int count) +{ + __be16 register_buf = cpu_to_be16(reg); + struct i2c_msg message_buf[2] = { + { + .addr = client->addr, + .flags = client->flags, + .len = sizeof(register_buf), + .buf = (u8 *)®ister_buf, + }, + { + .addr = client->addr, + .flags = client->flags | I2C_M_RD, + .len = count, + .buf = (u8 *)buf, + }, + }; + int ret; + + ret = i2c_transfer(client->adapter, message_buf, + ARRAY_SIZE(message_buf)); + if (ret < 0) + return ret; + + return 0; +} + +static int seesaw_register_write_u8(struct i2c_client *client, u16 reg, + u8 value) +{ + u8 write_buf[sizeof(reg) + sizeof(value)]; + int ret; + + put_unaligned_be16(reg, write_buf); + write_buf[sizeof(reg)] = value; + + ret = i2c_master_send(client, write_buf, sizeof(write_buf)); + if (ret < 0) + return ret; + + return 0; +} + +static int seesaw_register_write_u32(struct i2c_client *client, u16 reg, + u32 value) +{ + u8 write_buf[sizeof(reg) + sizeof(value)]; + int ret; + + put_unaligned_be16(reg, write_buf); + put_unaligned_be32(value, write_buf + sizeof(reg)); + ret = i2c_master_send(client, write_buf, sizeof(write_buf)); + if (ret < 0) + return ret; + + return 0; +} + +static int seesaw_read_data(struct i2c_client *client, struct seesaw_data *data) +{ + __be16 adc_data; + __be32 read_buf; + int err; + + err = seesaw_register_read(client, SEESAW_GPIO_BULK, + &read_buf, sizeof(read_buf)); + if (err) + return err; + + data->button_state = ~be32_to_cpu(read_buf); + + err = seesaw_register_read(client, + SEESAW_ADC_BASE | + (SEESAW_ADC_OFFSET + SEESAW_ANALOG_X), + &adc_data, sizeof(adc_data)); + if (err) + return err; + /* + * ADC reads left as max and right as 0, must be reversed since kernel + * expects reports in opposite order. + */ + data->x = SEESAW_JOYSTICK_MAX_AXIS - be16_to_cpu(adc_data); + + err = seesaw_register_read(client, + SEESAW_ADC_BASE | + (SEESAW_ADC_OFFSET + SEESAW_ANALOG_Y), + &adc_data, sizeof(adc_data)); + if (err) + return err; + + data->y = be16_to_cpu(adc_data); + + return 0; +} + +static void seesaw_poll(struct input_dev *input) +{ + struct seesaw_gamepad *private = input_get_drvdata(input); + struct seesaw_data data; + int err, i; + + err = seesaw_read_data(private->i2c_client, &data); + if (err) { + dev_err_ratelimited(&input->dev, + "failed to read joystick state: %d\n", err); + return; + } + + input_report_abs(input, ABS_X, data.x); + input_report_abs(input, ABS_Y, data.y); + + for_each_set_bit(i, &SEESAW_BUTTON_MASK, + BITS_PER_TYPE(SEESAW_BUTTON_MASK)) { + if (!sparse_keymap_report_event(input, i, + data.button_state & BIT(i), + false)) + dev_err_ratelimited(&input->dev, + "failed to report keymap event"); + } + + input_sync(input); +} + +static int seesaw_probe(struct i2c_client *client) +{ + struct seesaw_gamepad *seesaw; + u8 hardware_id; + int err; + + err = seesaw_register_write_u8(client, SEESAW_STATUS_SWRST, 0xFF); + if (err) + return err; + + /* Wait for the registers to reset before proceeding */ + usleep_range(10000, 15000); + + seesaw = devm_kzalloc(&client->dev, sizeof(*seesaw), GFP_KERNEL); + if (!seesaw) + return -ENOMEM; + + err = seesaw_register_read(client, SEESAW_STATUS_HW_ID, + &hardware_id, sizeof(hardware_id)); + if (err) + return err; + + dev_dbg(&client->dev, "Adafruit Seesaw Gamepad, Hardware ID: %02x\n", + hardware_id); + + /* Set Pin Mode to input and enable pull-up resistors */ + err = seesaw_register_write_u32(client, SEESAW_GPIO_DIRCLR_BULK, + SEESAW_BUTTON_MASK); + if (err) + return err; + err = seesaw_register_write_u32(client, SEESAW_GPIO_PULLENSET, + SEESAW_BUTTON_MASK); + if (err) + return err; + err = seesaw_register_write_u32(client, SEESAW_GPIO_BULK_SET, + SEESAW_BUTTON_MASK); + if (err) + return err; + + seesaw->i2c_client = client; + seesaw->input_dev = devm_input_allocate_device(&client->dev); + if (!seesaw->input_dev) + return -ENOMEM; + + seesaw->input_dev->id.bustype = BUS_I2C; + seesaw->input_dev->name = "Adafruit Seesaw Gamepad"; + seesaw->input_dev->phys = "i2c/" SEESAW_DEVICE_NAME; + input_set_drvdata(seesaw->input_dev, seesaw); + input_set_abs_params(seesaw->input_dev, ABS_X, + 0, SEESAW_JOYSTICK_MAX_AXIS, + SEESAW_JOYSTICK_FUZZ, SEESAW_JOYSTICK_FLAT); + input_set_abs_params(seesaw->input_dev, ABS_Y, + 0, SEESAW_JOYSTICK_MAX_AXIS, + SEESAW_JOYSTICK_FUZZ, SEESAW_JOYSTICK_FLAT); + + err = sparse_keymap_setup(seesaw->input_dev, seesaw_buttons_new, NULL); + if (err) { + dev_err(&client->dev, + "failed to set up input device keymap: %d\n", err); + return err; + } + + err = input_setup_polling(seesaw->input_dev, seesaw_poll); + if (err) { + dev_err(&client->dev, "failed to set up polling: %d\n", err); + return err; + } + + input_set_poll_interval(seesaw->input_dev, + SEESAW_GAMEPAD_POLL_INTERVAL_MS); + input_set_max_poll_interval(seesaw->input_dev, SEESAW_GAMEPAD_POLL_MAX); + input_set_min_poll_interval(seesaw->input_dev, SEESAW_GAMEPAD_POLL_MIN); + + err = input_register_device(seesaw->input_dev); + if (err) { + dev_err(&client->dev, "failed to register joystick: %d\n", err); + return err; + } + + return 0; +} + +static const struct i2c_device_id seesaw_id_table[] = { + { SEESAW_DEVICE_NAME }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, seesaw_id_table); + +static const struct of_device_id seesaw_of_table[] = { + { .compatible = "adafruit,seesaw-gamepad"}, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, seesaw_of_table); + +static struct i2c_driver seesaw_driver = { + .driver = { + .name = SEESAW_DEVICE_NAME, + .of_match_table = seesaw_of_table, + }, + .id_table = seesaw_id_table, + .probe = seesaw_probe, +}; +module_i2c_driver(seesaw_driver); + +MODULE_AUTHOR("Anshul Dalal "); +MODULE_DESCRIPTION("Adafruit Mini I2C Gamepad driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c index bf8b1cc0ea..f1822c19a2 100644 --- a/drivers/input/joystick/as5011.c +++ b/drivers/input/joystick/as5011.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include @@ -61,7 +61,7 @@ MODULE_LICENSE("GPL"); struct as5011_device { struct input_dev *input_dev; struct i2c_client *i2c_client; - unsigned int button_gpio; + struct gpio_desc *button_gpiod; unsigned int button_irq; unsigned int axis_irq; }; @@ -114,7 +114,7 @@ static int as5011_i2c_read(struct i2c_client *client, static irqreturn_t as5011_button_interrupt(int irq, void *dev_id) { struct as5011_device *as5011 = dev_id; - int val = gpio_get_value_cansleep(as5011->button_gpio); + int val = gpiod_get_value_cansleep(as5011->button_gpiod); input_report_key(as5011->input_dev, BTN_JOYSTICK, !val); input_sync(as5011->input_dev); @@ -248,7 +248,6 @@ static int as5011_probe(struct i2c_client *client) as5011->i2c_client = client; as5011->input_dev = input_dev; - as5011->button_gpio = plat_data->button_gpio; as5011->axis_irq = plat_data->axis_irq; input_dev->name = "Austria Microsystem as5011 joystick"; @@ -262,18 +261,20 @@ static int as5011_probe(struct i2c_client *client) input_set_abs_params(as5011->input_dev, ABS_Y, AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT); - error = gpio_request(as5011->button_gpio, "AS5011 button"); - if (error < 0) { - dev_err(&client->dev, "Failed to request button gpio\n"); + as5011->button_gpiod = devm_gpiod_get(&client->dev, NULL, GPIOD_IN); + if (IS_ERR(as5011->button_gpiod)) { + error = PTR_ERR(as5011->button_gpiod); + dev_err(&client->dev, "Failed to request button GPIO\n"); goto err_free_mem; } + gpiod_set_consumer_name(as5011->button_gpiod, "AS5011 button"); - irq = gpio_to_irq(as5011->button_gpio); + irq = gpiod_to_irq(as5011->button_gpiod); if (irq < 0) { dev_err(&client->dev, "Failed to get irq number for button gpio\n"); error = irq; - goto err_free_button_gpio; + goto err_free_mem; } as5011->button_irq = irq; @@ -286,7 +287,7 @@ static int as5011_probe(struct i2c_client *client) if (error < 0) { dev_err(&client->dev, "Can't allocate button irq %d\n", as5011->button_irq); - goto err_free_button_gpio; + goto err_free_mem; } error = as5011_configure_chip(as5011, plat_data); @@ -317,8 +318,6 @@ err_free_axis_irq: free_irq(as5011->axis_irq, as5011); err_free_button_irq: free_irq(as5011->button_irq, as5011); -err_free_button_gpio: - gpio_free(as5011->button_gpio); err_free_mem: input_free_device(input_dev); kfree(as5011); @@ -332,7 +331,6 @@ static void as5011_remove(struct i2c_client *client) free_irq(as5011->axis_irq, as5011); free_irq(as5011->button_irq, as5011); - gpio_free(as5011->button_gpio); input_unregister_device(as5011->input_dev); kfree(as5011); diff --git a/drivers/input/joystick/pxrc.c b/drivers/input/joystick/pxrc.c index ea2bf5951d..52d9eab667 100644 --- a/drivers/input/joystick/pxrc.c +++ b/drivers/input/joystick/pxrc.c @@ -5,15 +5,17 @@ * Copyright (C) 2018 Marcus Folkesson */ -#include +#include #include -#include +#include +#include #include +#include +#include #include + #include #include -#include -#include #define PXRC_VENDOR_ID 0x1781 #define PXRC_PRODUCT_ID 0x0898 @@ -81,33 +83,28 @@ exit: static int pxrc_open(struct input_dev *input) { struct pxrc *pxrc = input_get_drvdata(input); - int retval; + int error; - mutex_lock(&pxrc->pm_mutex); - retval = usb_submit_urb(pxrc->urb, GFP_KERNEL); - if (retval) { + guard(mutex)(&pxrc->pm_mutex); + error = usb_submit_urb(pxrc->urb, GFP_KERNEL); + if (error) { dev_err(&pxrc->intf->dev, "%s - usb_submit_urb failed, error: %d\n", - __func__, retval); - retval = -EIO; - goto out; + __func__, error); + return -EIO; } pxrc->is_open = true; - -out: - mutex_unlock(&pxrc->pm_mutex); - return retval; + return 0; } static void pxrc_close(struct input_dev *input) { struct pxrc *pxrc = input_get_drvdata(input); - mutex_lock(&pxrc->pm_mutex); + guard(mutex)(&pxrc->pm_mutex); usb_kill_urb(pxrc->urb); pxrc->is_open = false; - mutex_unlock(&pxrc->pm_mutex); } static void pxrc_free_urb(void *_pxrc) @@ -208,10 +205,9 @@ static int pxrc_suspend(struct usb_interface *intf, pm_message_t message) { struct pxrc *pxrc = usb_get_intfdata(intf); - mutex_lock(&pxrc->pm_mutex); + guard(mutex)(&pxrc->pm_mutex); if (pxrc->is_open) usb_kill_urb(pxrc->urb); - mutex_unlock(&pxrc->pm_mutex); return 0; } @@ -219,14 +215,12 @@ static int pxrc_suspend(struct usb_interface *intf, pm_message_t message) static int pxrc_resume(struct usb_interface *intf) { struct pxrc *pxrc = usb_get_intfdata(intf); - int retval = 0; - mutex_lock(&pxrc->pm_mutex); + guard(mutex)(&pxrc->pm_mutex); if (pxrc->is_open && usb_submit_urb(pxrc->urb, GFP_KERNEL) < 0) - retval = -EIO; + return -EIO; - mutex_unlock(&pxrc->pm_mutex); - return retval; + return 0; } static int pxrc_pre_reset(struct usb_interface *intf) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index c11af4441c..1fad51b51b 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -366,6 +366,8 @@ static const struct xpad_device { { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 }, + { 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE }, + { 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x3106, "8BitDo Pro 2 Wired Controller", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 }, @@ -507,6 +509,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA controllers */ XPAD_XBOX360_VENDOR(0x2563), /* OneXPlayer Gamepad */ XPAD_XBOX360_VENDOR(0x260d), /* Dareu H101 */ + XPAD_XBOXONE_VENDOR(0x294b), /* Snakebyte */ XPAD_XBOX360_VENDOR(0x2c22), /* Qanba Controllers */ XPAD_XBOX360_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller */ XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller for Xbox */ @@ -1678,7 +1681,7 @@ static int xpad_led_probe(struct usb_xpad *xpad) if (!led) return -ENOMEM; - xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL); + xpad->pad_nr = ida_alloc(&xpad_pad_seq, GFP_KERNEL); if (xpad->pad_nr < 0) { error = xpad->pad_nr; goto err_free_mem; @@ -1701,7 +1704,7 @@ static int xpad_led_probe(struct usb_xpad *xpad) return 0; err_free_id: - ida_simple_remove(&xpad_pad_seq, xpad->pad_nr); + ida_free(&xpad_pad_seq, xpad->pad_nr); err_free_mem: kfree(led); xpad->led = NULL; @@ -1714,7 +1717,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) if (xpad_led) { led_classdev_unregister(&xpad_led->led_cdev); - ida_simple_remove(&xpad_pad_seq, xpad->pad_nr); + ida_free(&xpad_pad_seq, xpad->pad_nr); kfree(xpad_led); } } diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index c229bd6b3f..7f67f9f294 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -826,7 +826,7 @@ static int atkbd_probe(struct atkbd *atkbd) if (atkbd_skip_getid(atkbd)) { atkbd->id = 0xab83; - return 0; + goto deactivate_kbd; } /* @@ -863,6 +863,7 @@ static int atkbd_probe(struct atkbd *atkbd) return -1; } +deactivate_kbd: /* * Make sure nothing is coming from the keyboard and disturbs our * internal state. diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c index 1b4937dce6..52fba9ee7c 100644 --- a/drivers/input/keyboard/cap11xx.c +++ b/drivers/input/keyboard/cap11xx.c @@ -10,10 +10,11 @@ #include #include #include -#include +#include #include #include #include +#include #define CAP11XX_REG_MAIN_CONTROL 0x00 #define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6) @@ -24,6 +25,7 @@ #define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a #define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X)) #define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f +#define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK 0x70 #define CAP11XX_REG_CONFIG 0x20 #define CAP11XX_REG_SENSOR_ENABLE 0x21 #define CAP11XX_REG_SENSOR_CONFIG 0x22 @@ -32,6 +34,7 @@ #define CAP11XX_REG_CALIBRATION 0x26 #define CAP11XX_REG_INT_ENABLE 0x27 #define CAP11XX_REG_REPEAT_RATE 0x28 +#define CAP11XX_REG_SIGNAL_GUARD_ENABLE 0x29 #define CAP11XX_REG_MT_CONFIG 0x2a #define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b #define CAP11XX_REG_MT_PATTERN 0x2d @@ -47,6 +50,8 @@ #define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) #define CAP11XX_REG_LED_POLARITY 0x73 #define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74 +#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG 0x80 +#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2 0x81 #define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90 #define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91 @@ -78,12 +83,20 @@ struct cap11xx_led { struct cap11xx_priv { struct regmap *regmap; + struct device *dev; struct input_dev *idev; + const struct cap11xx_hw_model *model; + u8 id; struct cap11xx_led *leds; int num_leds; /* config */ + u8 analog_gain; + u8 sensitivity_delta_sense; + u8 signal_guard_inputs_mask; + u32 thresholds[8]; + u32 calib_sensitivities[8]; u32 keycodes[]; }; @@ -160,9 +173,6 @@ static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg) case CAP11XX_REG_SENOR_DELTA(3): case CAP11XX_REG_SENOR_DELTA(4): case CAP11XX_REG_SENOR_DELTA(5): - case CAP11XX_REG_PRODUCT_ID: - case CAP11XX_REG_MANUFACTURER_ID: - case CAP11XX_REG_REVISION: return true; } @@ -177,10 +187,179 @@ static const struct regmap_config cap11xx_regmap_config = { .reg_defaults = cap11xx_reg_defaults, .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults), - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .volatile_reg = cap11xx_volatile_reg, }; +static int cap11xx_write_calib_sens_config_1(struct cap11xx_priv *priv) +{ + return regmap_write(priv->regmap, + CAP11XX_REG_CALIB_SENSITIVITY_CONFIG, + (priv->calib_sensitivities[3] << 6) | + (priv->calib_sensitivities[2] << 4) | + (priv->calib_sensitivities[1] << 2) | + priv->calib_sensitivities[0]); +} + +static int cap11xx_write_calib_sens_config_2(struct cap11xx_priv *priv) +{ + return regmap_write(priv->regmap, + CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2, + (priv->calib_sensitivities[7] << 6) | + (priv->calib_sensitivities[6] << 4) | + (priv->calib_sensitivities[5] << 2) | + priv->calib_sensitivities[4]); +} + +static int cap11xx_init_keys(struct cap11xx_priv *priv) +{ + struct device_node *node = priv->dev->of_node; + struct device *dev = priv->dev; + int i, error; + u32 u32_val; + + if (!node) { + dev_err(dev, "Corresponding DT entry is not available\n"); + return -ENODEV; + } + + if (!of_property_read_u32(node, "microchip,sensor-gain", &u32_val)) { + if (priv->model->no_gain) { + dev_warn(dev, + "This model doesn't support 'sensor-gain'\n"); + } else if (is_power_of_2(u32_val) && u32_val <= 8) { + priv->analog_gain = (u8)ilog2(u32_val); + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, + priv->analog_gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + } else { + dev_err(dev, "Invalid sensor-gain value %u\n", u32_val); + return -EINVAL; + } + } + + if (of_property_read_bool(node, "microchip,irq-active-high")) { + if (priv->id == CAP1106 || + priv->id == CAP1126 || + priv->id == CAP1188) { + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_CONFIG2, + CAP11XX_REG_CONFIG2_ALT_POL, + 0); + if (error) + return error; + } else { + dev_warn(dev, + "This model doesn't support 'irq-active-high'\n"); + } + } + + if (!of_property_read_u32(node, "microchip,sensitivity-delta-sense", &u32_val)) { + if (!is_power_of_2(u32_val) || u32_val > 128) { + dev_err(dev, "Invalid sensitivity-delta-sense value %u\n", u32_val); + return -EINVAL; + } + + priv->sensitivity_delta_sense = (u8)ilog2(u32_val); + u32_val = ~(FIELD_PREP(CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK, + priv->sensitivity_delta_sense)); + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_SENSITIVITY_CONTROL, + CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK, + u32_val); + if (error) + return error; + } + + if (!of_property_read_u32_array(node, "microchip,input-threshold", + priv->thresholds, priv->model->num_channels)) { + for (i = 0; i < priv->model->num_channels; i++) { + if (priv->thresholds[i] > 127) { + dev_err(dev, "Invalid input-threshold value %u\n", + priv->thresholds[i]); + return -EINVAL; + } + + error = regmap_write(priv->regmap, + CAP11XX_REG_SENSOR_THRESH(i), + priv->thresholds[i]); + if (error) + return error; + } + } + + if (!of_property_read_u32_array(node, "microchip,calib-sensitivity", + priv->calib_sensitivities, + priv->model->num_channels)) { + if (priv->id == CAP1293 || priv->id == CAP1298) { + for (i = 0; i < priv->model->num_channels; i++) { + if (!is_power_of_2(priv->calib_sensitivities[i]) || + priv->calib_sensitivities[i] > 4) { + dev_err(dev, "Invalid calib-sensitivity value %u\n", + priv->calib_sensitivities[i]); + return -EINVAL; + } + priv->calib_sensitivities[i] = ilog2(priv->calib_sensitivities[i]); + } + + error = cap11xx_write_calib_sens_config_1(priv); + if (error) + return error; + + if (priv->id == CAP1298) { + error = cap11xx_write_calib_sens_config_2(priv); + if (error) + return error; + } + } else { + dev_warn(dev, + "This model doesn't support 'calib-sensitivity'\n"); + } + } + + for (i = 0; i < priv->model->num_channels; i++) { + if (!of_property_read_u32_index(node, "microchip,signal-guard", + i, &u32_val)) { + if (u32_val > 1) + return -EINVAL; + if (u32_val) + priv->signal_guard_inputs_mask |= 0x01 << i; + } + } + + if (priv->signal_guard_inputs_mask) { + if (priv->id == CAP1293 || priv->id == CAP1298) { + error = regmap_write(priv->regmap, + CAP11XX_REG_SIGNAL_GUARD_ENABLE, + priv->signal_guard_inputs_mask); + if (error) + return error; + } else { + dev_warn(dev, + "This model doesn't support 'signal-guard'\n"); + } + } + + /* Provide some useful defaults */ + for (i = 0; i < priv->model->num_channels; i++) + priv->keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + priv->keycodes, priv->model->num_channels); + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + if (error) + return error; + + return 0; +} + static irqreturn_t cap11xx_thread_func(int irq_num, void *data) { struct cap11xx_priv *priv = data; @@ -332,11 +511,9 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) const struct i2c_device_id *id = i2c_client_get_device_id(i2c_client); struct device *dev = &i2c_client->dev; struct cap11xx_priv *priv; - struct device_node *node; const struct cap11xx_hw_model *cap; - int i, error, irq, gain = 0; + int i, error; unsigned int val, rev; - u32 gain32; if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) { dev_err(dev, "Invalid device ID %lu\n", id->driver_data); @@ -355,6 +532,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) if (!priv) return -ENOMEM; + priv->dev = dev; + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); @@ -384,50 +563,15 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) return error; dev_info(dev, "CAP11XX detected, model %s, revision 0x%02x\n", - id->name, rev); - node = dev->of_node; - - if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { - if (cap->no_gain) - dev_warn(dev, - "This version doesn't support sensor gain\n"); - else if (is_power_of_2(gain32) && gain32 <= 8) - gain = ilog2(gain32); - else - dev_err(dev, "Invalid sensor-gain value %d\n", gain32); - } + id->name, rev); - if (id->driver_data == CAP1106 || - id->driver_data == CAP1126 || - id->driver_data == CAP1188) { - if (of_property_read_bool(node, "microchip,irq-active-high")) { - error = regmap_update_bits(priv->regmap, - CAP11XX_REG_CONFIG2, - CAP11XX_REG_CONFIG2_ALT_POL, - 0); - if (error) - return error; - } - } - - /* Provide some useful defaults */ - for (i = 0; i < cap->num_channels; i++) - priv->keycodes[i] = KEY_A + i; - - of_property_read_u32_array(node, "linux,keycodes", - priv->keycodes, cap->num_channels); + priv->model = cap; + priv->id = id->driver_data; - if (!cap->no_gain) { - error = regmap_update_bits(priv->regmap, - CAP11XX_REG_MAIN_CONTROL, - CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, - gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); - if (error) - return error; - } + dev_info(dev, "CAP11XX device detected, model %s, revision 0x%02x\n", + id->name, rev); - /* Disable autorepeat. The Linux input system has its own handling. */ - error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + error = cap11xx_init_keys(priv); if (error) return error; @@ -439,7 +583,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) priv->idev->id.bustype = BUS_I2C; priv->idev->evbit[0] = BIT_MASK(EV_KEY); - if (of_property_read_bool(node, "autorepeat")) + if (of_property_read_bool(dev->of_node, "autorepeat")) __set_bit(EV_REP, priv->idev->evbit); for (i = 0; i < cap->num_channels; i++) @@ -474,13 +618,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) if (error) return error; - irq = irq_of_parse_and_map(node, 0); - if (!irq) { - dev_err(dev, "Unable to parse or map IRQ\n"); - return -ENXIO; - } - - error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func, + error = devm_request_threaded_irq(dev, i2c_client->irq, + NULL, cap11xx_thread_func, IRQF_ONESHOT, dev_name(dev), priv); if (error) return error; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 2e7c2c046e..9f3bcd41cf 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -45,7 +45,9 @@ struct gpio_button_data { unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */ unsigned int irq; + unsigned int wakeirq; unsigned int wakeup_trigger_type; + spinlock_t lock; bool disabled; bool key_pressed; @@ -511,6 +513,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev, struct gpio_button_data *bdata = &ddata->data[idx]; irq_handler_t isr; unsigned long irqflags; + const char *wakedesc; int irq; int error; @@ -575,15 +578,23 @@ static int gpio_keys_setup_key(struct platform_device *pdev, !gpiod_cansleep(bdata->gpiod); } + /* + * If an interrupt was specified, use it instead of the gpio + * interrupt and use the gpio for reading the state. A separate + * interrupt may be used as the main button interrupt for + * runtime PM to detect events also in deeper idle states. If a + * dedicated wakeirq is used for system suspend only, see below + * for bdata->wakeirq setup. + */ if (button->irq) { bdata->irq = button->irq; } else { irq = gpiod_to_irq(bdata->gpiod); if (irq < 0) { error = irq; - dev_err(dev, - "Unable to get irq number for GPIO %d, error %d\n", - button->gpio, error); + dev_err_probe(dev, error, + "Unable to get irq number for GPIO %d\n", + button->gpio); return error; } bdata->irq = irq; @@ -672,6 +683,36 @@ static int gpio_keys_setup_key(struct platform_device *pdev, return error; } + if (!button->wakeirq) + return 0; + + /* Use :wakeup suffix like drivers/base/power/wakeirq.c does */ + wakedesc = devm_kasprintf(dev, GFP_KERNEL, "%s:wakeup", desc); + if (!wakedesc) + return -ENOMEM; + + bdata->wakeirq = button->wakeirq; + irqflags |= IRQF_NO_SUSPEND; + + /* + * Wakeirq shares the handler with the main interrupt, it's only + * active during system suspend. See gpio_keys_button_enable_wakeup() + * and gpio_keys_button_disable_wakeup(). + */ + error = devm_request_any_context_irq(dev, bdata->wakeirq, isr, + irqflags, wakedesc, bdata); + if (error < 0) { + dev_err(dev, "Unable to claim wakeirq %d; error %d\n", + bdata->irq, error); + return error; + } + + /* + * Disable wakeirq until suspend. IRQF_NO_AUTOEN won't work if + * IRQF_SHARED was set based on !button->can_disable. + */ + disable_irq(bdata->wakeirq); + return 0; } @@ -728,7 +769,7 @@ gpio_keys_get_devtree_pdata(struct device *dev) struct gpio_keys_platform_data *pdata; struct gpio_keys_button *button; struct fwnode_handle *child; - int nbuttons; + int nbuttons, irq; nbuttons = device_get_child_node_count(dev); if (nbuttons == 0) @@ -750,9 +791,19 @@ gpio_keys_get_devtree_pdata(struct device *dev) device_property_read_string(dev, "label", &pdata->name); device_for_each_child_node(dev, child) { - if (is_of_node(child)) - button->irq = - irq_of_parse_and_map(to_of_node(child), 0); + if (is_of_node(child)) { + irq = of_irq_get_byname(to_of_node(child), "irq"); + if (irq > 0) + button->irq = irq; + + irq = of_irq_get_byname(to_of_node(child), "wakeup"); + if (irq > 0) + button->wakeirq = irq; + + if (!button->irq && !button->wakeirq) + button->irq = + irq_of_parse_and_map(to_of_node(child), 0); + } if (fwnode_property_read_u32(child, "linux,code", &button->code)) { @@ -921,6 +972,11 @@ gpio_keys_button_enable_wakeup(struct gpio_button_data *bdata) } } + if (bdata->wakeirq) { + enable_irq(bdata->wakeirq); + disable_irq(bdata->irq); + } + return 0; } @@ -929,6 +985,11 @@ gpio_keys_button_disable_wakeup(struct gpio_button_data *bdata) { int error; + if (bdata->wakeirq) { + enable_irq(bdata->irq); + disable_irq(bdata->wakeirq); + } + /* * The trigger type is always both edges for gpio-based keys and we do * not support changing wakeup trigger for interrupt-based keys. diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 454fb86756..16f936db73 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -49,9 +48,6 @@ struct omap_kp { static DECLARE_TASKLET_DISABLED_OLD(kp_tasklet, omap_kp_tasklet); -static unsigned int *row_gpios; -static unsigned int *col_gpios; - static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) { /* disable keyboard interrupt and schedule for handling */ @@ -180,7 +176,7 @@ static int omap_kp_probe(struct platform_device *pdev) struct omap_kp *omap_kp; struct input_dev *input_dev; struct omap_kp_platform_data *pdata = dev_get_platdata(&pdev->dev); - int i, col_idx, row_idx, ret; + int ret; unsigned int row_shift, keycodemax; if (!pdata->rows || !pdata->cols || !pdata->keymap_data) { @@ -209,17 +205,9 @@ static int omap_kp_probe(struct platform_device *pdev) if (pdata->delay) omap_kp->delay = pdata->delay; - if (pdata->row_gpios && pdata->col_gpios) { - row_gpios = pdata->row_gpios; - col_gpios = pdata->col_gpios; - } - omap_kp->rows = pdata->rows; omap_kp->cols = pdata->cols; - col_idx = 0; - row_idx = 0; - timer_setup(&omap_kp->timer, omap_kp_timer, 0); /* get the irq and init timer*/ @@ -276,11 +264,6 @@ err4: err3: device_remove_file(&pdev->dev, &dev_attr_enable); err2: - for (i = row_idx - 1; i >= 0; i--) - gpio_free(row_gpios[i]); - for (i = col_idx - 1; i >= 0; i--) - gpio_free(col_gpios[i]); - kfree(omap_kp); input_free_device(input_dev); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index d3f8688fdd..040b340995 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -83,6 +84,7 @@ struct omap4_keypad { bool no_autorepeat; u64 keys; unsigned short *keymap; + struct clk *fck; }; static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) @@ -209,6 +211,10 @@ static int omap4_keypad_open(struct input_dev *input) if (error) return error; + error = clk_prepare_enable(keypad_data->fck); + if (error) + goto out; + disable_irq(keypad_data->irq); kbd_writel(keypad_data, OMAP4_KBD_CTRL, @@ -226,10 +232,11 @@ static int omap4_keypad_open(struct input_dev *input) enable_irq(keypad_data->irq); +out: pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); - return 0; + return error; } static void omap4_keypad_stop(struct omap4_keypad *keypad_data) @@ -258,6 +265,7 @@ static void omap4_keypad_close(struct input_dev *input) disable_irq(keypad_data->irq); omap4_keypad_stop(keypad_data); enable_irq(keypad_data->irq); + clk_disable_unprepare(keypad_data->fck); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); @@ -356,6 +364,11 @@ static int omap4_keypad_probe(struct platform_device *pdev) } keypad_data->irq = irq; + keypad_data->fck = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(keypad_data->fck)) + return dev_err_probe(&pdev->dev, PTR_ERR(keypad_data->fck), + "unable to get fck"); + mutex_init(&keypad_data->lock); platform_set_drvdata(pdev, keypad_data); diff --git a/drivers/input/keyboard/qt1050.c b/drivers/input/keyboard/qt1050.c index 6953097db4..b51dfcd760 100644 --- a/drivers/input/keyboard/qt1050.c +++ b/drivers/input/keyboard/qt1050.c @@ -213,7 +213,7 @@ static struct regmap_config qt1050_regmap_config = { .val_bits = 8, .max_register = QT1050_RES_CAL, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, .wr_table = &qt1050_writeable_table, .rd_table = &qt1050_readable_table, diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c index 8af59ced1e..677bc4baa5 100644 --- a/drivers/input/keyboard/tca6416-keypad.c +++ b/drivers/input/keyboard/tca6416-keypad.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c index ce82548916..c1fa75c0f9 100644 --- a/drivers/input/misc/da7280.c +++ b/drivers/input/misc/da7280.c @@ -352,7 +352,7 @@ static int da7280_haptic_set_pwm(struct da7280_haptic *haptics, bool enabled) state.duty_cycle = period_mag_multi; } - error = pwm_apply_state(haptics->pwm_dev, &state); + error = pwm_apply_might_sleep(haptics->pwm_dev, &state); if (error) dev_err(haptics->dev, "Failed to apply pwm state: %d\n", error); @@ -1175,7 +1175,7 @@ static int da7280_probe(struct i2c_client *client) /* Sync up PWM state and ensure it is off. */ pwm_init_state(haptics->pwm_dev, &state); state.enabled = false; - error = pwm_apply_state(haptics->pwm_dev, &state); + error = pwm_apply_might_sleep(haptics->pwm_dev, &state); if (error) { dev_err(dev, "Failed to apply PWM state: %d\n", error); return error; diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c index 74808bae32..c338765e0e 100644 --- a/drivers/input/misc/da9063_onkey.c +++ b/drivers/input/misc/da9063_onkey.c @@ -9,11 +9,12 @@ #include #include #include +#include #include #include +#include #include #include -#include #include #include #include @@ -74,13 +75,6 @@ static const struct da906x_chip_config da9062_regs = { .name = "da9062-onkey", }; -static const struct of_device_id da9063_compatible_reg_id_table[] = { - { .compatible = "dlg,da9063-onkey", .data = &da9063_regs }, - { .compatible = "dlg,da9062-onkey", .data = &da9062_regs }, - { }, -}; -MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table); - static void da9063_poll_on(struct work_struct *work) { struct da9063_onkey *onkey = container_of(work, @@ -187,56 +181,43 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, void *data) static int da9063_onkey_probe(struct platform_device *pdev) { struct da9063_onkey *onkey; - const struct of_device_id *match; - int irq; int error; - - match = of_match_node(da9063_compatible_reg_id_table, - pdev->dev.of_node); - if (!match) - return -ENXIO; + int irq; onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey), GFP_KERNEL); - if (!onkey) { - dev_err(&pdev->dev, "Failed to allocate memory.\n"); + if (!onkey) return -ENOMEM; - } - onkey->config = match->data; + onkey->config = device_get_match_data(&pdev->dev); + if (!onkey->config) + return -ENXIO; + onkey->dev = &pdev->dev; onkey->regmap = dev_get_regmap(pdev->dev.parent, NULL); - if (!onkey->regmap) { - dev_err(&pdev->dev, "Parent regmap unavailable.\n"); - return -ENXIO; - } + if (!onkey->regmap) + return dev_err_probe(&pdev->dev, -ENXIO, + "Parent regmap unavailable.\n"); - onkey->key_power = !of_property_read_bool(pdev->dev.of_node, - "dlg,disable-key-power"); + onkey->key_power = !device_property_read_bool(&pdev->dev, + "dlg,disable-key-power"); onkey->input = devm_input_allocate_device(&pdev->dev); - if (!onkey->input) { - dev_err(&pdev->dev, "Failed to allocated input device.\n"); + if (!onkey->input) return -ENOMEM; - } onkey->input->name = onkey->config->name; snprintf(onkey->phys, sizeof(onkey->phys), "%s/input0", onkey->config->name); onkey->input->phys = onkey->phys; - onkey->input->dev.parent = &pdev->dev; input_set_capability(onkey->input, EV_KEY, KEY_POWER); error = devm_delayed_work_autocancel(&pdev->dev, &onkey->work, da9063_poll_on); - if (error) { - dev_err(&pdev->dev, - "Failed to add cancel poll action: %d\n", - error); + if (error) return error; - } irq = platform_get_irq_byname(pdev, "ONKEY"); if (irq < 0) @@ -246,11 +227,9 @@ static int da9063_onkey_probe(struct platform_device *pdev) NULL, da9063_onkey_irq_handler, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "ONKEY", onkey); - if (error) { - dev_err(&pdev->dev, - "Failed to request IRQ %d: %d\n", irq, error); - return error; - } + if (error) + return dev_err_probe(&pdev->dev, error, + "Failed to allocate onkey IRQ\n"); error = dev_pm_set_wake_irq(&pdev->dev, irq); if (error) @@ -261,15 +240,19 @@ static int da9063_onkey_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, true); error = input_register_device(onkey->input); - if (error) { - dev_err(&pdev->dev, - "Failed to register input device: %d\n", error); + if (error) return error; - } return 0; } +static const struct of_device_id da9063_compatible_reg_id_table[] = { + { .compatible = "dlg,da9063-onkey", .data = &da9063_regs }, + { .compatible = "dlg,da9062-onkey", .data = &da9062_regs }, + { } +}; +MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table); + static struct platform_driver da9063_onkey_driver = { .probe = da9063_onkey_probe, .driver = { diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c index b2f1292e27..6e8cc28deb 100644 --- a/drivers/input/misc/ims-pcu.c +++ b/drivers/input/misc/ims-pcu.c @@ -1050,7 +1050,7 @@ static ssize_t ims_pcu_attribute_show(struct device *dev, container_of(dattr, struct ims_pcu_attribute, dattr); char *field = (char *)pcu + attr->field_offset; - return scnprintf(buf, PAGE_SIZE, "%.*s\n", attr->field_length, field); + return sysfs_emit(buf, "%.*s\n", attr->field_length, field); } static ssize_t ims_pcu_attribute_store(struct device *dev, @@ -1206,7 +1206,7 @@ ims_pcu_update_firmware_status_show(struct device *dev, struct usb_interface *intf = to_usb_interface(dev); struct ims_pcu *pcu = usb_get_intfdata(intf); - return scnprintf(buf, PAGE_SIZE, "%d\n", pcu->update_firmware_status); + return sysfs_emit(buf, "%d\n", pcu->update_firmware_status); } static DEVICE_ATTR(update_firmware_status, S_IRUGO, @@ -1309,7 +1309,7 @@ static ssize_t ims_pcu_ofn_reg_data_show(struct device *dev, if (error) return error; - return scnprintf(buf, PAGE_SIZE, "%x\n", data); + return sysfs_emit(buf, "%x\n", data); } static ssize_t ims_pcu_ofn_reg_data_store(struct device *dev, @@ -1344,7 +1344,7 @@ static ssize_t ims_pcu_ofn_reg_addr_show(struct device *dev, int error; mutex_lock(&pcu->cmd_mutex); - error = scnprintf(buf, PAGE_SIZE, "%x\n", pcu->ofn_reg_addr); + error = sysfs_emit(buf, "%x\n", pcu->ofn_reg_addr); mutex_unlock(&pcu->cmd_mutex); return error; @@ -1397,7 +1397,7 @@ static ssize_t ims_pcu_ofn_bit_show(struct device *dev, if (error) return error; - return scnprintf(buf, PAGE_SIZE, "%d\n", !!(data & (1 << attr->nr))); + return sysfs_emit(buf, "%d\n", !!(data & (1 << attr->nr))); } static ssize_t ims_pcu_ofn_bit_store(struct device *dev, diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c index 3c636c75e8..cd14ff9f57 100644 --- a/drivers/input/misc/iqs269a.c +++ b/drivers/input/misc/iqs269a.c @@ -9,6 +9,7 @@ * axial sliders presented by the device. */ +#include #include #include #include @@ -26,6 +27,8 @@ #define IQS269_VER_INFO 0x00 #define IQS269_VER_INFO_PROD_NUM 0x4F +#define IQS269_VER_INFO_FW_NUM_2 0x03 +#define IQS269_VER_INFO_FW_NUM_3 0x10 #define IQS269_SYS_FLAGS 0x02 #define IQS269_SYS_FLAGS_SHOW_RESET BIT(15) @@ -53,6 +56,7 @@ #define IQS269_SYS_SETTINGS_ULP_UPDATE_MASK GENMASK(10, 8) #define IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT 8 #define IQS269_SYS_SETTINGS_ULP_UPDATE_MAX 7 +#define IQS269_SYS_SETTINGS_SLIDER_SWIPE BIT(7) #define IQS269_SYS_SETTINGS_RESEED_OFFSET BIT(6) #define IQS269_SYS_SETTINGS_EVENT_MODE BIT(5) #define IQS269_SYS_SETTINGS_EVENT_MODE_LP BIT(4) @@ -69,6 +73,7 @@ #define IQS269_FILT_STR_MAX 3 #define IQS269_EVENT_MASK_SYS BIT(6) +#define IQS269_EVENT_MASK_GESTURE BIT(3) #define IQS269_EVENT_MASK_DEEP BIT(2) #define IQS269_EVENT_MASK_TOUCH BIT(1) #define IQS269_EVENT_MASK_PROX BIT(0) @@ -97,6 +102,15 @@ #define IQS269_MISC_B_TRACKING_UI_ENABLE BIT(4) #define IQS269_MISC_B_FILT_STR_SLIDER GENMASK(1, 0) +#define IQS269_TOUCH_HOLD_SLIDER_SEL 0x89 +#define IQS269_TOUCH_HOLD_DEFAULT 0x14 +#define IQS269_TOUCH_HOLD_MS_MIN 256 +#define IQS269_TOUCH_HOLD_MS_MAX 65280 + +#define IQS269_TIMEOUT_TAP_MS_MAX 4080 +#define IQS269_TIMEOUT_SWIPE_MS_MAX 4080 +#define IQS269_THRESH_SWIPE_MAX 255 + #define IQS269_CHx_ENG_A_MEAS_CAP_SIZE BIT(15) #define IQS269_CHx_ENG_A_RX_GND_INACTIVE BIT(13) #define IQS269_CHx_ENG_A_LOCAL_CAP_SIZE BIT(12) @@ -142,6 +156,10 @@ #define IQS269_MAX_REG 0xFF +#define IQS269_OTP_OPTION_DEFAULT 0x00 +#define IQS269_OTP_OPTION_TWS 0xD0 +#define IQS269_OTP_OPTION_HOLD BIT(7) + #define IQS269_NUM_CH 8 #define IQS269_NUM_SL 2 @@ -175,6 +193,20 @@ enum iqs269_event_id { IQS269_EVENT_DEEP_UP, }; +enum iqs269_slider_id { + IQS269_SLIDER_NONE, + IQS269_SLIDER_KEY, + IQS269_SLIDER_RAW, +}; + +enum iqs269_gesture_id { + IQS269_GESTURE_TAP, + IQS269_GESTURE_HOLD, + IQS269_GESTURE_FLICK_POS, + IQS269_GESTURE_FLICK_NEG, + IQS269_NUM_GESTURES, +}; + struct iqs269_switch_desc { unsigned int code; bool enabled; @@ -234,7 +266,7 @@ struct iqs269_ver_info { u8 prod_num; u8 sw_num; u8 hw_num; - u8 padding; + u8 fw_num; } __packed; struct iqs269_ch_reg { @@ -285,16 +317,42 @@ struct iqs269_private { struct regmap *regmap; struct mutex lock; struct iqs269_switch_desc switches[ARRAY_SIZE(iqs269_events)]; + struct iqs269_ver_info ver_info; struct iqs269_sys_reg sys_reg; struct completion ati_done; struct input_dev *keypad; struct input_dev *slider[IQS269_NUM_SL]; unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH]; + unsigned int sl_code[IQS269_NUM_SL][IQS269_NUM_GESTURES]; + unsigned int otp_option; unsigned int ch_num; bool hall_enable; bool ati_current; }; +static enum iqs269_slider_id iqs269_slider_type(struct iqs269_private *iqs269, + int slider_num) +{ + int i; + + /* + * Slider 1 is unavailable if the touch-and-hold option is enabled via + * OTP. In that case, the channel selection register is repurposed for + * the touch-and-hold timer ceiling. + */ + if (slider_num && (iqs269->otp_option & IQS269_OTP_OPTION_HOLD)) + return IQS269_SLIDER_NONE; + + if (!iqs269->sys_reg.slider_select[slider_num]) + return IQS269_SLIDER_NONE; + + for (i = 0; i < IQS269_NUM_GESTURES; i++) + if (iqs269->sl_code[slider_num][i] != KEY_RESERVED) + return IQS269_SLIDER_KEY; + + return IQS269_SLIDER_RAW; +} + static int iqs269_ati_mode_set(struct iqs269_private *iqs269, unsigned int ch_num, unsigned int mode) { @@ -525,7 +583,8 @@ static int iqs269_parse_chan(struct iqs269_private *iqs269, if (fwnode_property_present(ch_node, "azoteq,slider0-select")) iqs269->sys_reg.slider_select[0] |= BIT(reg); - if (fwnode_property_present(ch_node, "azoteq,slider1-select")) + if (fwnode_property_present(ch_node, "azoteq,slider1-select") && + !(iqs269->otp_option & IQS269_OTP_OPTION_HOLD)) iqs269->sys_reg.slider_select[1] |= BIT(reg); ch_reg = &iqs269->sys_reg.ch_reg[reg]; @@ -950,7 +1009,43 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269) sys_reg->blocking = 0; sys_reg->slider_select[0] = 0; - sys_reg->slider_select[1] = 0; + + /* + * If configured via OTP to do so, the device asserts a pulse on the + * GPIO4 pin for approximately 60 ms once a selected channel is held + * in a state of touch for a configurable length of time. + * + * In that case, the register used for slider 1 channel selection is + * repurposed for the touch-and-hold timer ceiling. + */ + if (iqs269->otp_option & IQS269_OTP_OPTION_HOLD) { + if (!device_property_read_u32(&client->dev, + "azoteq,touch-hold-ms", &val)) { + if (val < IQS269_TOUCH_HOLD_MS_MIN || + val > IQS269_TOUCH_HOLD_MS_MAX) { + dev_err(&client->dev, + "Invalid touch-and-hold ceiling: %u\n", + val); + return -EINVAL; + } + + sys_reg->slider_select[1] = val / 256; + } else if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) { + /* + * The default touch-and-hold timer ceiling initially + * read from early revisions of silicon is invalid if + * the device experienced a soft reset between power- + * on and the read operation. + * + * To protect against this case, explicitly cache the + * default value so that it is restored each time the + * device is re-initialized. + */ + sys_reg->slider_select[1] = IQS269_TOUCH_HOLD_DEFAULT; + } + } else { + sys_reg->slider_select[1] = 0; + } sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS); @@ -1004,6 +1099,76 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269) general |= (val << IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT); } + if (device_property_present(&client->dev, "linux,keycodes")) { + int scale = 1; + int count = device_property_count_u32(&client->dev, + "linux,keycodes"); + if (count > IQS269_NUM_GESTURES * IQS269_NUM_SL) { + dev_err(&client->dev, "Too many keycodes present\n"); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count keycodes: %d\n", + count); + return count; + } + + error = device_property_read_u32_array(&client->dev, + "linux,keycodes", + *iqs269->sl_code, count); + if (error) { + dev_err(&client->dev, "Failed to read keycodes: %d\n", + error); + return error; + } + + if (device_property_present(&client->dev, + "azoteq,gesture-swipe")) + general |= IQS269_SYS_SETTINGS_SLIDER_SWIPE; + + /* + * Early revisions of silicon use a more granular step size for + * tap and swipe gesture timeouts; scale them appropriately. + */ + if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) + scale = 4; + + if (!device_property_read_u32(&client->dev, + "azoteq,timeout-tap-ms", &val)) { + if (val > IQS269_TIMEOUT_TAP_MS_MAX / scale) { + dev_err(&client->dev, "Invalid timeout: %u\n", + val); + return -EINVAL; + } + + sys_reg->timeout_tap = val / (16 / scale); + } + + if (!device_property_read_u32(&client->dev, + "azoteq,timeout-swipe-ms", + &val)) { + if (val > IQS269_TIMEOUT_SWIPE_MS_MAX / scale) { + dev_err(&client->dev, "Invalid timeout: %u\n", + val); + return -EINVAL; + } + + sys_reg->timeout_swipe = val / (16 / scale); + } + + if (!device_property_read_u32(&client->dev, + "azoteq,thresh-swipe", &val)) { + if (val > IQS269_THRESH_SWIPE_MAX) { + dev_err(&client->dev, "Invalid threshold: %u\n", + val); + return -EINVAL; + } + + sys_reg->thresh_swipe = val; + } + + sys_reg->event_mask &= ~IQS269_EVENT_MASK_GESTURE; + } + general &= ~IQS269_SYS_SETTINGS_RESEED_OFFSET; if (device_property_present(&client->dev, "azoteq,reseed-offset")) general |= IQS269_SYS_SETTINGS_RESEED_OFFSET; @@ -1012,10 +1177,11 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269) /* * As per the datasheet, enable streaming during normal-power mode if - * either slider is in use. In that case, the device returns to event - * mode during low-power mode. + * raw coordinates will be read from either slider. In that case, the + * device returns to event mode during low-power mode. */ - if (sys_reg->slider_select[0] || sys_reg->slider_select[1]) + if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW || + iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW) general |= IQS269_SYS_SETTINGS_EVENT_MODE_LP; general |= IQS269_SYS_SETTINGS_REDO_ATI; @@ -1026,12 +1192,30 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269) return 0; } +static const struct reg_sequence iqs269_tws_init[] = { + { IQS269_TOUCH_HOLD_SLIDER_SEL, IQS269_TOUCH_HOLD_DEFAULT }, + { 0xF0, 0x580F }, + { 0xF0, 0x59EF }, +}; + static int iqs269_dev_init(struct iqs269_private *iqs269) { int error; mutex_lock(&iqs269->lock); + /* + * Early revisions of silicon require the following workaround in order + * to restore any OTP-enabled functionality after a soft reset. + */ + if (iqs269->otp_option == IQS269_OTP_OPTION_TWS && + iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) { + error = regmap_multi_reg_write(iqs269->regmap, iqs269_tws_init, + ARRAY_SIZE(iqs269_tws_init)); + if (error) + goto err_mutex; + } + error = regmap_update_bits(iqs269->regmap, IQS269_HALL_UI, IQS269_HALL_UI_ENABLE, iqs269->hall_enable ? ~0 : 0); @@ -1106,19 +1290,37 @@ static int iqs269_input_init(struct iqs269_private *iqs269) } for (i = 0; i < IQS269_NUM_SL; i++) { - if (!iqs269->sys_reg.slider_select[i]) + if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_NONE) continue; iqs269->slider[i] = devm_input_allocate_device(&client->dev); if (!iqs269->slider[i]) return -ENOMEM; + iqs269->slider[i]->keycodemax = ARRAY_SIZE(iqs269->sl_code[i]); + iqs269->slider[i]->keycode = iqs269->sl_code[i]; + iqs269->slider[i]->keycodesize = sizeof(**iqs269->sl_code); + iqs269->slider[i]->name = i ? "iqs269a_slider_1" : "iqs269a_slider_0"; iqs269->slider[i]->id.bustype = BUS_I2C; - input_set_capability(iqs269->slider[i], EV_KEY, BTN_TOUCH); - input_set_abs_params(iqs269->slider[i], ABS_X, 0, 255, 0, 0); + for (j = 0; j < IQS269_NUM_GESTURES; j++) + if (iqs269->sl_code[i][j] != KEY_RESERVED) + input_set_capability(iqs269->slider[i], EV_KEY, + iqs269->sl_code[i][j]); + + /* + * Present the slider as a narrow trackpad if one or more chan- + * nels have been selected to participate, but no gestures have + * been mapped to a keycode. + */ + if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_RAW) { + input_set_capability(iqs269->slider[i], + EV_KEY, BTN_TOUCH); + input_set_abs_params(iqs269->slider[i], + ABS_X, 0, 255, 0, 0); + } error = input_register_device(iqs269->slider[i]); if (error) { @@ -1167,28 +1369,62 @@ static int iqs269_report(struct iqs269_private *iqs269) if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_IN_ATI) return 0; - error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X, slider_x, - sizeof(slider_x)); - if (error) { - dev_err(&client->dev, "Failed to read slider position: %d\n", - error); - return error; + if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW || + iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW) { + error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X, + slider_x, sizeof(slider_x)); + if (error) { + dev_err(&client->dev, + "Failed to read slider position: %d\n", error); + return error; + } } for (i = 0; i < IQS269_NUM_SL; i++) { - if (!iqs269->sys_reg.slider_select[i]) + flags.gesture >>= (i * IQS269_NUM_GESTURES); + + switch (iqs269_slider_type(iqs269, i)) { + case IQS269_SLIDER_NONE: continue; - /* - * Report BTN_TOUCH if any channel that participates in the - * slider is in a state of touch. - */ - if (flags.states[IQS269_ST_OFFS_TOUCH] & - iqs269->sys_reg.slider_select[i]) { - input_report_key(iqs269->slider[i], BTN_TOUCH, 1); - input_report_abs(iqs269->slider[i], ABS_X, slider_x[i]); - } else { - input_report_key(iqs269->slider[i], BTN_TOUCH, 0); + case IQS269_SLIDER_KEY: + for (j = 0; j < IQS269_NUM_GESTURES; j++) + input_report_key(iqs269->slider[i], + iqs269->sl_code[i][j], + flags.gesture & BIT(j)); + + if (!(flags.gesture & (BIT(IQS269_GESTURE_FLICK_NEG) | + BIT(IQS269_GESTURE_FLICK_POS) | + BIT(IQS269_GESTURE_TAP)))) + break; + + input_sync(iqs269->slider[i]); + + /* + * Momentary gestures are followed by a complementary + * release cycle so as to emulate a full keystroke. + */ + for (j = 0; j < IQS269_NUM_GESTURES; j++) + if (j != IQS269_GESTURE_HOLD) + input_report_key(iqs269->slider[i], + iqs269->sl_code[i][j], + 0); + break; + + case IQS269_SLIDER_RAW: + /* + * The slider is considered to be in a state of touch + * if any selected channels are in a state of touch. + */ + state = flags.states[IQS269_ST_OFFS_TOUCH]; + state &= iqs269->sys_reg.slider_select[i]; + + input_report_key(iqs269->slider[i], BTN_TOUCH, state); + + if (state) + input_report_abs(iqs269->slider[i], + ABS_X, slider_x[i]); + break; } input_sync(iqs269->slider[i]); @@ -1286,7 +1522,7 @@ static ssize_t counts_show(struct device *dev, if (error) return error; - return scnprintf(buf, PAGE_SIZE, "%u\n", le16_to_cpu(counts)); + return sysfs_emit(buf, "%u\n", le16_to_cpu(counts)); } static ssize_t hall_bin_show(struct device *dev, @@ -1324,7 +1560,7 @@ static ssize_t hall_bin_show(struct device *dev, return -EINVAL; } - return scnprintf(buf, PAGE_SIZE, "%u\n", val); + return sysfs_emit(buf, "%u\n", val); } static ssize_t hall_enable_show(struct device *dev, @@ -1332,7 +1568,7 @@ static ssize_t hall_enable_show(struct device *dev, { struct iqs269_private *iqs269 = dev_get_drvdata(dev); - return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->hall_enable); + return sysfs_emit(buf, "%u\n", iqs269->hall_enable); } static ssize_t hall_enable_store(struct device *dev, @@ -1362,7 +1598,7 @@ static ssize_t ch_number_show(struct device *dev, { struct iqs269_private *iqs269 = dev_get_drvdata(dev); - return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ch_num); + return sysfs_emit(buf, "%u\n", iqs269->ch_num); } static ssize_t ch_number_store(struct device *dev, @@ -1391,8 +1627,7 @@ static ssize_t rx_enable_show(struct device *dev, struct iqs269_private *iqs269 = dev_get_drvdata(dev); struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg; - return scnprintf(buf, PAGE_SIZE, "%u\n", - ch_reg[iqs269->ch_num].rx_enable); + return sysfs_emit(buf, "%u\n", ch_reg[iqs269->ch_num].rx_enable); } static ssize_t rx_enable_store(struct device *dev, @@ -1432,7 +1667,7 @@ static ssize_t ati_mode_show(struct device *dev, if (error) return error; - return scnprintf(buf, PAGE_SIZE, "%u\n", val); + return sysfs_emit(buf, "%u\n", val); } static ssize_t ati_mode_store(struct device *dev, @@ -1465,7 +1700,7 @@ static ssize_t ati_base_show(struct device *dev, if (error) return error; - return scnprintf(buf, PAGE_SIZE, "%u\n", val); + return sysfs_emit(buf, "%u\n", val); } static ssize_t ati_base_store(struct device *dev, @@ -1498,7 +1733,7 @@ static ssize_t ati_target_show(struct device *dev, if (error) return error; - return scnprintf(buf, PAGE_SIZE, "%u\n", val); + return sysfs_emit(buf, "%u\n", val); } static ssize_t ati_target_store(struct device *dev, @@ -1525,9 +1760,9 @@ static ssize_t ati_trigger_show(struct device *dev, { struct iqs269_private *iqs269 = dev_get_drvdata(dev); - return scnprintf(buf, PAGE_SIZE, "%u\n", - iqs269->ati_current && - completion_done(&iqs269->ati_done)); + return sysfs_emit(buf, "%u\n", + iqs269->ati_current && + completion_done(&iqs269->ati_done)); } static ssize_t ati_trigger_store(struct device *dev, @@ -1596,7 +1831,6 @@ static const struct regmap_config iqs269_regmap_config = { static int iqs269_probe(struct i2c_client *client) { - struct iqs269_ver_info ver_info; struct iqs269_private *iqs269; int error; @@ -1618,14 +1852,16 @@ static int iqs269_probe(struct i2c_client *client) mutex_init(&iqs269->lock); init_completion(&iqs269->ati_done); - error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO, &ver_info, - sizeof(ver_info)); + iqs269->otp_option = (uintptr_t)device_get_match_data(&client->dev); + + error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO, + &iqs269->ver_info, sizeof(iqs269->ver_info)); if (error) return error; - if (ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) { + if (iqs269->ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) { dev_err(&client->dev, "Unrecognized product number: 0x%02X\n", - ver_info.prod_num); + iqs269->ver_info.prod_num); return -EINVAL; } @@ -1728,7 +1964,18 @@ static int iqs269_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(iqs269_pm, iqs269_suspend, iqs269_resume); static const struct of_device_id iqs269_of_match[] = { - { .compatible = "azoteq,iqs269a" }, + { + .compatible = "azoteq,iqs269a", + .data = (void *)IQS269_OTP_OPTION_DEFAULT, + }, + { + .compatible = "azoteq,iqs269a-00", + .data = (void *)IQS269_OTP_OPTION_DEFAULT, + }, + { + .compatible = "azoteq,iqs269a-d0", + .data = (void *)IQS269_OTP_OPTION_TWS, + }, { } }; MODULE_DEVICE_TABLE(of, iqs269_of_match); diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c index 80f4416ffe..0e646f1b25 100644 --- a/drivers/input/misc/max77693-haptic.c +++ b/drivers/input/misc/max77693-haptic.c @@ -307,7 +307,7 @@ static int max77693_haptic_probe(struct platform_device *pdev) haptic->suspend_state = false; /* Variant-specific init */ - haptic->dev_type = platform_get_device_id(pdev)->driver_data; + haptic->dev_type = max77693->type; switch (haptic->dev_type) { case TYPE_MAX77693: haptic->regmap_haptic = max77693->regmap_haptic; @@ -406,16 +406,24 @@ static DEFINE_SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops, max77693_haptic_resume); static const struct platform_device_id max77693_haptic_id[] = { - { "max77693-haptic", TYPE_MAX77693 }, - { "max77843-haptic", TYPE_MAX77843 }, + { "max77693-haptic", }, + { "max77843-haptic", }, {}, }; MODULE_DEVICE_TABLE(platform, max77693_haptic_id); +static const struct of_device_id of_max77693_haptic_dt_match[] = { + { .compatible = "maxim,max77693-haptic", }, + { .compatible = "maxim,max77843-haptic", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, of_max77693_haptic_dt_match); + static struct platform_driver max77693_haptic_driver = { .driver = { .name = "max77693-haptic", .pm = pm_sleep_ptr(&max77693_haptic_pm_ops), + .of_match_table = of_max77693_haptic_dt_match, }, .probe = max77693_haptic_probe, .id_table = max77693_haptic_id, diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index 1e731d8397..5b9aedf436 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -39,7 +39,7 @@ static int pwm_beeper_on(struct pwm_beeper *beeper, unsigned long period) state.period = period; pwm_set_relative_duty_cycle(&state, 50, 100); - error = pwm_apply_state(beeper->pwm, &state); + error = pwm_apply_might_sleep(beeper->pwm, &state); if (error) return error; @@ -138,7 +138,7 @@ static int pwm_beeper_probe(struct platform_device *pdev) /* Sync up PWM state and ensure it is off. */ pwm_init_state(beeper->pwm, &state); state.enabled = false; - error = pwm_apply_state(beeper->pwm, &state); + error = pwm_apply_might_sleep(beeper->pwm, &state); if (error) { dev_err(dev, "failed to apply initial PWM state: %d\n", error); diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c index acac79c488..3e5ed685ed 100644 --- a/drivers/input/misc/pwm-vibra.c +++ b/drivers/input/misc/pwm-vibra.c @@ -56,7 +56,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); state.enabled = true; - err = pwm_apply_state(vibrator->pwm, &state); + err = pwm_apply_might_sleep(vibrator->pwm, &state); if (err) { dev_err(pdev, "failed to apply pwm state: %d\n", err); return err; @@ -67,7 +67,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) state.duty_cycle = vibrator->direction_duty_cycle; state.enabled = true; - err = pwm_apply_state(vibrator->pwm_dir, &state); + err = pwm_apply_might_sleep(vibrator->pwm_dir, &state); if (err) { dev_err(pdev, "failed to apply dir-pwm state: %d\n", err); pwm_disable(vibrator->pwm); @@ -160,7 +160,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev) /* Sync up PWM state and ensure it is off. */ pwm_init_state(vibrator->pwm, &state); state.enabled = false; - err = pwm_apply_state(vibrator->pwm, &state); + err = pwm_apply_might_sleep(vibrator->pwm, &state); if (err) { dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", err); @@ -174,7 +174,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev) /* Sync up PWM state and ensure it is off. */ pwm_init_state(vibrator->pwm_dir, &state); state.enabled = false; - err = pwm_apply_state(vibrator->pwm_dir, &state); + err = pwm_apply_might_sleep(vibrator->pwm_dir, &state); if (err) { dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", err); diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c index a84098448f..5979deabe2 100644 --- a/drivers/input/mouse/cyapa.c +++ b/drivers/input/mouse/cyapa.c @@ -756,16 +756,16 @@ static ssize_t cyapa_show_suspend_scanrate(struct device *dev, switch (pwr_cmd) { case PWR_MODE_BTN_ONLY: - len = scnprintf(buf, PAGE_SIZE, "%s\n", BTN_ONLY_MODE_NAME); + len = sysfs_emit(buf, "%s\n", BTN_ONLY_MODE_NAME); break; case PWR_MODE_OFF: - len = scnprintf(buf, PAGE_SIZE, "%s\n", OFF_MODE_NAME); + len = sysfs_emit(buf, "%s\n", OFF_MODE_NAME); break; default: - len = scnprintf(buf, PAGE_SIZE, "%u\n", - cyapa->gen == CYAPA_GEN3 ? + len = sysfs_emit(buf, "%u\n", + cyapa->gen == CYAPA_GEN3 ? cyapa_pwr_cmd_to_sleep_time(pwr_cmd) : sleep_time); break; @@ -877,8 +877,8 @@ static ssize_t cyapa_show_rt_suspend_scanrate(struct device *dev, mutex_unlock(&cyapa->state_sync_lock); - return scnprintf(buf, PAGE_SIZE, "%u\n", - cyapa->gen == CYAPA_GEN3 ? + return sysfs_emit(buf, "%u\n", + cyapa->gen == CYAPA_GEN3 ? cyapa_pwr_cmd_to_sleep_time(pwr_cmd) : sleep_time); } @@ -988,8 +988,8 @@ static ssize_t cyapa_show_fm_ver(struct device *dev, error = mutex_lock_interruptible(&cyapa->state_sync_lock); if (error) return error; - error = scnprintf(buf, PAGE_SIZE, "%d.%d\n", cyapa->fw_maj_ver, - cyapa->fw_min_ver); + error = sysfs_emit(buf, "%d.%d\n", + cyapa->fw_maj_ver, cyapa->fw_min_ver); mutex_unlock(&cyapa->state_sync_lock); return error; } @@ -1004,7 +1004,7 @@ static ssize_t cyapa_show_product_id(struct device *dev, error = mutex_lock_interruptible(&cyapa->state_sync_lock); if (error) return error; - size = scnprintf(buf, PAGE_SIZE, "%s\n", cyapa->product_id); + size = sysfs_emit(buf, "%s\n", cyapa->product_id); mutex_unlock(&cyapa->state_sync_lock); return size; } @@ -1209,8 +1209,8 @@ static ssize_t cyapa_show_mode(struct device *dev, if (error) return error; - size = scnprintf(buf, PAGE_SIZE, "gen%d %s\n", - cyapa->gen, cyapa_state_to_string(cyapa)); + size = sysfs_emit(buf, "gen%d %s\n", + cyapa->gen, cyapa_state_to_string(cyapa)); mutex_unlock(&cyapa->state_sync_lock); return size; diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c index a97f4acb64..60c83bc71d 100644 --- a/drivers/input/mouse/cyapa_gen3.c +++ b/drivers/input/mouse/cyapa_gen3.c @@ -860,7 +860,7 @@ static ssize_t cyapa_gen3_show_baseline(struct device *dev, dev_dbg(dev, "Baseline report successful. Max: %d Min: %d\n", max_baseline, min_baseline); - ret = scnprintf(buf, PAGE_SIZE, "%d %d\n", max_baseline, min_baseline); + ret = sysfs_emit(buf, "%d %d\n", max_baseline, min_baseline); out: return ret; diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c index abf42f77b4..2e6bcb0725 100644 --- a/drivers/input/mouse/cyapa_gen5.c +++ b/drivers/input/mouse/cyapa_gen5.c @@ -2418,12 +2418,12 @@ resume_scanning: return resume_error ? resume_error : error; /* 12. Output data strings */ - size = scnprintf(buf, PAGE_SIZE, "%d %d %d %d %d %d %d %d %d %d %d ", + size = sysfs_emit(buf, "%d %d %d %d %d %d %d %d %d %d %d ", gidac_mutual_min, gidac_mutual_max, gidac_mutual_ave, lidac_mutual_min, lidac_mutual_max, lidac_mutual_ave, gidac_self_rx, gidac_self_tx, lidac_self_min, lidac_self_max, lidac_self_ave); - size += scnprintf(buf + size, PAGE_SIZE - size, + size += sysfs_emit_at(buf, size, "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d\n", raw_cap_mutual_min, raw_cap_mutual_max, raw_cap_mutual_ave, raw_cap_self_min, raw_cap_self_max, raw_cap_self_ave, diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c index 0caaf3e642..4ffe08fee1 100644 --- a/drivers/input/mouse/cyapa_gen6.c +++ b/drivers/input/mouse/cyapa_gen6.c @@ -629,14 +629,14 @@ static ssize_t cyapa_gen6_show_baseline(struct device *dev, if (error) goto resume_scanning; - size = scnprintf(buf, PAGE_SIZE, "%d %d %d %d %d %d ", - data[0], /* RX Attenuator Mutual */ - data[1], /* IDAC Mutual */ - data[2], /* RX Attenuator Self RX */ - data[3], /* IDAC Self RX */ - data[4], /* RX Attenuator Self TX */ - data[5] /* IDAC Self TX */ - ); + size = sysfs_emit(buf, "%d %d %d %d %d %d ", + data[0], /* RX Attenuator Mutual */ + data[1], /* IDAC Mutual */ + data[2], /* RX Attenuator Self RX */ + data[3], /* IDAC Self RX */ + data[4], /* RX Attenuator Self TX */ + data[5] /* IDAC Self TX */ + ); /* 3. Read Attenuator Trim. */ data_len = sizeof(data); @@ -648,8 +648,8 @@ static ssize_t cyapa_gen6_show_baseline(struct device *dev, /* set attenuator trim values. */ for (i = 0; i < data_len; i++) - size += scnprintf(buf + size, PAGE_SIZE - size, "%d ", data[i]); - size += scnprintf(buf + size, PAGE_SIZE - size, "\n"); + size += sysfs_emit_at(buf, size, "%d ", data[i]); + size += sysfs_emit_at(buf, size, "\n"); resume_scanning: /* 4. Resume Scanning*/ diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 148a601396..8a72c200cc 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -572,7 +572,7 @@ static ssize_t elan_sysfs_read_fw_checksum(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct elan_tp_data *data = i2c_get_clientdata(client); - return sprintf(buf, "0x%04x\n", data->fw_checksum); + return sysfs_emit(buf, "0x%04x\n", data->fw_checksum); } static ssize_t elan_sysfs_read_product_id(struct device *dev, @@ -582,8 +582,8 @@ static ssize_t elan_sysfs_read_product_id(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct elan_tp_data *data = i2c_get_clientdata(client); - return sprintf(buf, ETP_PRODUCT_ID_FORMAT_STRING "\n", - data->product_id); + return sysfs_emit(buf, ETP_PRODUCT_ID_FORMAT_STRING "\n", + data->product_id); } static ssize_t elan_sysfs_read_fw_ver(struct device *dev, @@ -593,7 +593,7 @@ static ssize_t elan_sysfs_read_fw_ver(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct elan_tp_data *data = i2c_get_clientdata(client); - return sprintf(buf, "%d.0\n", data->fw_version); + return sysfs_emit(buf, "%d.0\n", data->fw_version); } static ssize_t elan_sysfs_read_sm_ver(struct device *dev, @@ -603,7 +603,7 @@ static ssize_t elan_sysfs_read_sm_ver(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct elan_tp_data *data = i2c_get_clientdata(client); - return sprintf(buf, "%d.0\n", data->sm_version); + return sysfs_emit(buf, "%d.0\n", data->sm_version); } static ssize_t elan_sysfs_read_iap_ver(struct device *dev, @@ -613,7 +613,7 @@ static ssize_t elan_sysfs_read_iap_ver(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct elan_tp_data *data = i2c_get_clientdata(client); - return sprintf(buf, "%d.0\n", data->iap_version); + return sysfs_emit(buf, "%d.0\n", data->iap_version); } static ssize_t elan_sysfs_update_fw(struct device *dev, @@ -754,7 +754,7 @@ static ssize_t elan_sysfs_read_mode(struct device *dev, if (error) return error; - return sprintf(buf, "%d\n", (int)mode); + return sysfs_emit(buf, "%d\n", (int)mode); } static DEVICE_ATTR(product_id, S_IRUGO, elan_sysfs_read_product_id, NULL); @@ -858,7 +858,7 @@ static ssize_t min_show(struct device *dev, goto out; } - retval = snprintf(buf, PAGE_SIZE, "%d", data->min_baseline); + retval = sysfs_emit(buf, "%d", data->min_baseline); out: mutex_unlock(&data->sysfs_mutex); @@ -881,7 +881,7 @@ static ssize_t max_show(struct device *dev, goto out; } - retval = snprintf(buf, PAGE_SIZE, "%d", data->max_baseline); + retval = sysfs_emit(buf, "%d", data->max_baseline); out: mutex_unlock(&data->sysfs_mutex); diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c index c00dc1275d..ba757783c2 100644 --- a/drivers/input/mouse/navpoint.c +++ b/drivers/input/mouse/navpoint.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include #include @@ -32,7 +32,7 @@ struct navpoint { struct ssp_device *ssp; struct input_dev *input; struct device *dev; - int gpio; + struct gpio_desc *gpiod; int index; u8 data[1 + HEADER_LENGTH(0xff)]; }; @@ -170,16 +170,14 @@ static void navpoint_up(struct navpoint *navpoint) dev_err(navpoint->dev, "timeout waiting for SSSR[CSS] to clear\n"); - if (gpio_is_valid(navpoint->gpio)) - gpio_set_value(navpoint->gpio, 1); + gpiod_set_value(navpoint->gpiod, 1); } static void navpoint_down(struct navpoint *navpoint) { struct ssp_device *ssp = navpoint->ssp; - if (gpio_is_valid(navpoint->gpio)) - gpio_set_value(navpoint->gpio, 0); + gpiod_set_value(navpoint->gpiod, 0); pxa_ssp_write_reg(ssp, SSCR0, 0); @@ -216,18 +214,9 @@ static int navpoint_probe(struct platform_device *pdev) return -EINVAL; } - if (gpio_is_valid(pdata->gpio)) { - error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW, - "SYNAPTICS_ON"); - if (error) - return error; - } - ssp = pxa_ssp_request(pdata->port, pdev->name); - if (!ssp) { - error = -ENODEV; - goto err_free_gpio; - } + if (!ssp) + return -ENODEV; /* HaRET does not disable devices before jumping into Linux */ if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { @@ -242,10 +231,18 @@ static int navpoint_probe(struct platform_device *pdev) goto err_free_mem; } + navpoint->gpiod = gpiod_get_optional(&pdev->dev, + NULL, GPIOD_OUT_LOW); + if (IS_ERR(navpoint->gpiod)) { + error = PTR_ERR(navpoint->gpiod); + dev_err(&pdev->dev, "error getting GPIO\n"); + goto err_free_mem; + } + gpiod_set_consumer_name(navpoint->gpiod, "SYNAPTICS_ON"); + navpoint->ssp = ssp; navpoint->input = input; navpoint->dev = &pdev->dev; - navpoint->gpio = pdata->gpio; input->name = pdev->name; input->dev.parent = &pdev->dev; @@ -288,17 +285,12 @@ err_free_mem: input_free_device(input); kfree(navpoint); pxa_ssp_free(ssp); -err_free_gpio: - if (gpio_is_valid(pdata->gpio)) - gpio_free(pdata->gpio); return error; } static void navpoint_remove(struct platform_device *pdev) { - const struct navpoint_platform_data *pdata = - dev_get_platdata(&pdev->dev); struct navpoint *navpoint = platform_get_drvdata(pdev); struct ssp_device *ssp = navpoint->ssp; @@ -308,9 +300,6 @@ static void navpoint_remove(struct platform_device *pdev) kfree(navpoint); pxa_ssp_free(ssp); - - if (gpio_is_valid(pdata->gpio)) - gpio_free(pdata->gpio); } static int navpoint_suspend(struct device *dev) diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index 258d5fe3d3..ef9ea295f9 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -978,12 +978,12 @@ static int rmi_driver_remove(struct device *dev) rmi_disable_irq(rmi_dev, false); - irq_domain_remove(data->irqdomain); - data->irqdomain = NULL; - rmi_f34_remove_sysfs(rmi_dev); rmi_free_function_list(rmi_dev); + irq_domain_remove(data->irqdomain); + data->irqdomain = NULL; + return 0; } @@ -1196,7 +1196,11 @@ static int rmi_driver_probe(struct device *dev) } rmi_driver_set_input_params(rmi_dev, data->input); data->input->phys = devm_kasprintf(dev, GFP_KERNEL, - "%s/input0", dev_name(dev)); + "%s/input0", dev_name(dev)); + if (!data->input->phys) { + retval = -ENOMEM; + goto err; + } } retval = rmi_init_functions(data); diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index d7603c50f8..cc1d4b4246 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -267,8 +267,7 @@ static ssize_t rmi_driver_manufacturer_id_show(struct device *dev, struct rmi_driver_data *data = dev_get_drvdata(dev); struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev); - return scnprintf(buf, PAGE_SIZE, "%d\n", - f01->properties.manufacturer_id); + return sysfs_emit(buf, "%d\n", f01->properties.manufacturer_id); } static DEVICE_ATTR(manufacturer_id, 0444, @@ -280,7 +279,7 @@ static ssize_t rmi_driver_dom_show(struct device *dev, struct rmi_driver_data *data = dev_get_drvdata(dev); struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev); - return scnprintf(buf, PAGE_SIZE, "%s\n", f01->properties.dom); + return sysfs_emit(buf, "%s\n", f01->properties.dom); } static DEVICE_ATTR(date_of_manufacture, 0444, rmi_driver_dom_show, NULL); @@ -292,7 +291,7 @@ static ssize_t rmi_driver_product_id_show(struct device *dev, struct rmi_driver_data *data = dev_get_drvdata(dev); struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev); - return scnprintf(buf, PAGE_SIZE, "%s\n", f01->properties.product_id); + return sysfs_emit(buf, "%s\n", f01->properties.product_id); } static DEVICE_ATTR(product_id, 0444, rmi_driver_product_id_show, NULL); @@ -304,7 +303,7 @@ static ssize_t rmi_driver_firmware_id_show(struct device *dev, struct rmi_driver_data *data = dev_get_drvdata(dev); struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev); - return scnprintf(buf, PAGE_SIZE, "%d\n", f01->properties.firmware_id); + return sysfs_emit(buf, "%d\n", f01->properties.firmware_id); } static DEVICE_ATTR(firmware_id, 0444, rmi_driver_firmware_id_show, NULL); @@ -318,8 +317,8 @@ static ssize_t rmi_driver_package_id_show(struct device *dev, u32 package_id = f01->properties.package_id; - return scnprintf(buf, PAGE_SIZE, "%04x.%04x\n", - package_id & 0xffff, (package_id >> 16) & 0xffff); + return sysfs_emit(buf, "%04x.%04x\n", + package_id & 0xffff, (package_id >> 16) & 0xffff); } static DEVICE_ATTR(package_id, 0444, rmi_driver_package_id_show, NULL); diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c index 852aeb0b2c..07c866f422 100644 --- a/drivers/input/rmi4/rmi_spi.c +++ b/drivers/input/rmi4/rmi_spi.c @@ -375,7 +375,7 @@ static int rmi_spi_probe(struct spi_device *spi) struct rmi_device_platform_data *spi_pdata = spi->dev.platform_data; int error; - if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + if (spi->master->flags & SPI_CONTROLLER_HALF_DUPLEX) return -EINVAL; rmi_spi = devm_kzalloc(&spi->dev, sizeof(struct rmi_spi_xport), diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 20094b9899..542a31448c 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2546,7 +2546,7 @@ static const struct vb2_queue mxt_queue = { .ops = &mxt_queue_ops, .mem_ops = &vb2_vmalloc_memops, .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC, - .min_buffers_needed = 1, + .min_queued_buffers = 1, }; static int mxt_vidioc_querycap(struct file *file, void *priv, @@ -2818,8 +2818,8 @@ static ssize_t mxt_fw_version_show(struct device *dev, { struct mxt_data *data = dev_get_drvdata(dev); struct mxt_info *info = data->info; - return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n", - info->version >> 4, info->version & 0xf, info->build); + return sysfs_emit(buf, "%u.%u.%02X\n", + info->version >> 4, info->version & 0xf, info->build); } /* Hardware Version is returned as FamilyID.VariantID */ @@ -2828,8 +2828,7 @@ static ssize_t mxt_hw_version_show(struct device *dev, { struct mxt_data *data = dev_get_drvdata(dev); struct mxt_info *info = data->info; - return scnprintf(buf, PAGE_SIZE, "%u.%u\n", - info->family_id, info->variant_id); + return sysfs_emit(buf, "%u.%u\n", info->family_id, info->variant_id); } static ssize_t mxt_show_instance(char *buf, int count, @@ -2839,19 +2838,18 @@ static ssize_t mxt_show_instance(char *buf, int count, int i; if (mxt_obj_instances(object) > 1) - count += scnprintf(buf + count, PAGE_SIZE - count, - "Instance %u\n", instance); + count += sysfs_emit_at(buf, count, "Instance %u\n", instance); for (i = 0; i < mxt_obj_size(object); i++) - count += scnprintf(buf + count, PAGE_SIZE - count, - "\t[%2u]: %02x (%d)\n", i, val[i], val[i]); - count += scnprintf(buf + count, PAGE_SIZE - count, "\n"); + count += sysfs_emit_at(buf, count, "\t[%2u]: %02x (%d)\n", + i, val[i], val[i]); + count += sysfs_emit_at(buf, count, "\n"); return count; } static ssize_t mxt_object_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct mxt_data *data = dev_get_drvdata(dev); struct mxt_object *object; @@ -2872,8 +2870,7 @@ static ssize_t mxt_object_show(struct device *dev, if (!mxt_object_readable(object->type)) continue; - count += scnprintf(buf + count, PAGE_SIZE - count, - "T%u:\n", object->type); + count += sysfs_emit_at(buf, count, "T%u:\n", object->type); for (j = 0; j < mxt_obj_instances(object); j++) { u16 size = mxt_obj_size(object); diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 3e102bcc4a..2a1db11344 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -431,7 +431,7 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, *field = val; } - count = scnprintf(buf, PAGE_SIZE, "%d\n", val); + count = sysfs_emit(buf, "%d\n", val); out: mutex_unlock(&tsdata->mutex); return error ?: count; diff --git a/drivers/input/touchscreen/hideep.c b/drivers/input/touchscreen/hideep.c index 0f58258306..eae90676f4 100644 --- a/drivers/input/touchscreen/hideep.c +++ b/drivers/input/touchscreen/hideep.c @@ -928,8 +928,7 @@ static ssize_t hideep_fw_version_show(struct device *dev, ssize_t len; mutex_lock(&ts->dev_mutex); - len = scnprintf(buf, PAGE_SIZE, "%04x\n", - be16_to_cpu(ts->dwz_info.release_ver)); + len = sysfs_emit(buf, "%04x\n", be16_to_cpu(ts->dwz_info.release_ver)); mutex_unlock(&ts->dev_mutex); return len; @@ -943,8 +942,7 @@ static ssize_t hideep_product_id_show(struct device *dev, ssize_t len; mutex_lock(&ts->dev_mutex); - len = scnprintf(buf, PAGE_SIZE, "%04x\n", - be16_to_cpu(ts->dwz_info.product_id)); + len = sysfs_emit(buf, "%04x\n", be16_to_cpu(ts->dwz_info.product_id)); mutex_unlock(&ts->dev_mutex); return len; diff --git a/drivers/input/touchscreen/hycon-hy46xx.c b/drivers/input/touchscreen/hycon-hy46xx.c index d0f257989f..2e01d87977 100644 --- a/drivers/input/touchscreen/hycon-hy46xx.c +++ b/drivers/input/touchscreen/hycon-hy46xx.c @@ -202,7 +202,7 @@ static ssize_t hycon_hy46xx_setting_show(struct device *dev, *field = val; } - count = scnprintf(buf, PAGE_SIZE, "%d\n", val); + count = sysfs_emit(buf, "%d\n", val); out: mutex_unlock(&tsdata->mutex); diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c index 90c4934e75..fc4e39b665 100644 --- a/drivers/input/touchscreen/ilitek_ts_i2c.c +++ b/drivers/input/touchscreen/ilitek_ts_i2c.c @@ -512,12 +512,12 @@ static ssize_t firmware_version_show(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct ilitek_ts_data *ts = i2c_get_clientdata(client); - return scnprintf(buf, PAGE_SIZE, - "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n", - ts->firmware_ver[0], ts->firmware_ver[1], - ts->firmware_ver[2], ts->firmware_ver[3], - ts->firmware_ver[4], ts->firmware_ver[5], - ts->firmware_ver[6], ts->firmware_ver[7]); + return sysfs_emit(buf, + "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n", + ts->firmware_ver[0], ts->firmware_ver[1], + ts->firmware_ver[2], ts->firmware_ver[3], + ts->firmware_ver[4], ts->firmware_ver[5], + ts->firmware_ver[6], ts->firmware_ver[7]); } static DEVICE_ATTR_RO(firmware_version); @@ -527,8 +527,8 @@ static ssize_t product_id_show(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct ilitek_ts_data *ts = i2c_get_clientdata(client); - return scnprintf(buf, PAGE_SIZE, "product id: [%04X], module: [%s]\n", - ts->mcu_ver, ts->product_id); + return sysfs_emit(buf, "product id: [%04X], module: [%s]\n", + ts->mcu_ver, ts->product_id); } static DEVICE_ATTR_RO(product_id); diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c index 07111ca244..55ecebe981 100644 --- a/drivers/input/touchscreen/imagis.c +++ b/drivers/input/touchscreen/imagis.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only +#include #include #include #include @@ -23,12 +24,9 @@ #define IST3038C_I2C_RETRY_COUNT 3 #define IST3038C_MAX_FINGER_NUM 10 #define IST3038C_X_MASK GENMASK(23, 12) -#define IST3038C_X_SHIFT 12 #define IST3038C_Y_MASK GENMASK(11, 0) #define IST3038C_AREA_MASK GENMASK(27, 24) -#define IST3038C_AREA_SHIFT 24 #define IST3038C_FINGER_COUNT_MASK GENMASK(15, 12) -#define IST3038C_FINGER_COUNT_SHIFT 12 #define IST3038C_FINGER_STATUS_MASK GENMASK(9, 0) struct imagis_ts { @@ -92,8 +90,7 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id) goto out; } - finger_count = (intr_message & IST3038C_FINGER_COUNT_MASK) >> - IST3038C_FINGER_COUNT_SHIFT; + finger_count = FIELD_GET(IST3038C_FINGER_COUNT_MASK, intr_message); if (finger_count > IST3038C_MAX_FINGER_NUM) { dev_err(&ts->client->dev, "finger count %d is more than maximum supported\n", @@ -101,7 +98,7 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id) goto out; } - finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK; + finger_pressed = FIELD_GET(IST3038C_FINGER_STATUS_MASK, intr_message); for (i = 0; i < finger_count; i++) { error = imagis_i2c_read_reg(ts, @@ -118,12 +115,11 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id) input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, finger_pressed & BIT(i)); touchscreen_report_pos(ts->input_dev, &ts->prop, - (finger_status & IST3038C_X_MASK) >> - IST3038C_X_SHIFT, - finger_status & IST3038C_Y_MASK, 1); + FIELD_GET(IST3038C_X_MASK, finger_status), + FIELD_GET(IST3038C_Y_MASK, finger_status), + true); input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, - (finger_status & IST3038C_AREA_MASK) >> - IST3038C_AREA_SHIFT); + FIELD_GET(IST3038C_AREA_MASK, finger_status)); } input_mt_sync_frame(ts->input_dev); @@ -210,7 +206,7 @@ static int imagis_init_input_dev(struct imagis_ts *ts) input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 16, 0, 0); touchscreen_parse_properties(input_dev, true, &ts->prop); if (!ts->prop.max_x || !ts->prop.max_y) { diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c index a3f4fb85be..4d226118f3 100644 --- a/drivers/input/touchscreen/iqs5xx.c +++ b/drivers/input/touchscreen/iqs5xx.c @@ -943,12 +943,12 @@ static ssize_t fw_info_show(struct device *dev, if (!iqs5xx->dev_id_info.bl_status) return -ENODATA; - return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n", - be16_to_cpu(iqs5xx->dev_id_info.prod_num), - be16_to_cpu(iqs5xx->dev_id_info.proj_num), - iqs5xx->dev_id_info.major_ver, - iqs5xx->dev_id_info.minor_ver, - iqs5xx->exp_file[0], iqs5xx->exp_file[1]); + return sysfs_emit(buf, "%u.%u.%u.%u:%u.%u\n", + be16_to_cpu(iqs5xx->dev_id_info.prod_num), + be16_to_cpu(iqs5xx->dev_id_info.proj_num), + iqs5xx->dev_id_info.major_ver, + iqs5xx->dev_id_info.minor_ver, + iqs5xx->exp_file[0], iqs5xx->exp_file[1]); } static DEVICE_ATTR_WO(fw_file); diff --git a/drivers/input/touchscreen/iqs7211.c b/drivers/input/touchscreen/iqs7211.c index dc084f8737..f0a56cde89 100644 --- a/drivers/input/touchscreen/iqs7211.c +++ b/drivers/input/touchscreen/iqs7211.c @@ -2401,12 +2401,12 @@ static ssize_t fw_info_show(struct device *dev, { struct iqs7211_private *iqs7211 = dev_get_drvdata(dev); - return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n", - le16_to_cpu(iqs7211->ver_info.prod_num), - le32_to_cpu(iqs7211->ver_info.patch), - le16_to_cpu(iqs7211->ver_info.major), - le16_to_cpu(iqs7211->ver_info.minor), - iqs7211->exp_file[1], iqs7211->exp_file[0]); + return sysfs_emit(buf, "%u.%u.%u.%u:%u.%u\n", + le16_to_cpu(iqs7211->ver_info.prod_num), + le32_to_cpu(iqs7211->ver_info.patch), + le16_to_cpu(iqs7211->ver_info.major), + le16_to_cpu(iqs7211->ver_info.minor), + iqs7211->exp_file[1], iqs7211->exp_file[0]); } static DEVICE_ATTR_RO(fw_info); diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c index aa325486f6..78e1c63e53 100644 --- a/drivers/input/touchscreen/melfas_mip4.c +++ b/drivers/input/touchscreen/melfas_mip4.c @@ -1336,9 +1336,9 @@ static ssize_t mip4_sysfs_read_fw_version(struct device *dev, /* Take lock to prevent racing with firmware update */ mutex_lock(&ts->input->mutex); - count = snprintf(buf, PAGE_SIZE, "%04X %04X %04X %04X\n", - ts->fw_version.boot, ts->fw_version.core, - ts->fw_version.app, ts->fw_version.param); + count = sysfs_emit(buf, "%04X %04X %04X %04X\n", + ts->fw_version.boot, ts->fw_version.core, + ts->fw_version.app, ts->fw_version.param); mutex_unlock(&ts->input->mutex); @@ -1362,8 +1362,8 @@ static ssize_t mip4_sysfs_read_hw_version(struct device *dev, * product_name shows the name or version of the hardware * paired with current firmware in the chip. */ - count = snprintf(buf, PAGE_SIZE, "%.*s\n", - (int)sizeof(ts->product_name), ts->product_name); + count = sysfs_emit(buf, "%.*s\n", + (int)sizeof(ts->product_name), ts->product_name); mutex_unlock(&ts->input->mutex); @@ -1382,7 +1382,7 @@ static ssize_t mip4_sysfs_read_product_id(struct device *dev, mutex_lock(&ts->input->mutex); - count = snprintf(buf, PAGE_SIZE, "%04X\n", ts->product_id); + count = sysfs_emit(buf, "%04X\n", ts->product_id); mutex_unlock(&ts->input->mutex); @@ -1401,8 +1401,8 @@ static ssize_t mip4_sysfs_read_ic_name(struct device *dev, mutex_lock(&ts->input->mutex); - count = snprintf(buf, PAGE_SIZE, "%.*s\n", - (int)sizeof(ts->ic_name), ts->ic_name); + count = sysfs_emit(buf, "%.*s\n", + (int)sizeof(ts->ic_name), ts->ic_name); mutex_unlock(&ts->input->mutex); diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index 8ddb3f7d30..ae3aab4283 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -847,9 +847,10 @@ static int sur40_queue_setup(struct vb2_queue *q, unsigned int sizes[], struct device *alloc_devs[]) { struct sur40_state *sur40 = vb2_get_drv_priv(q); + unsigned int q_num_bufs = vb2_get_num_buffers(q); - if (q->num_buffers + *nbuffers < 3) - *nbuffers = 3 - q->num_buffers; + if (q_num_bufs + *nbuffers < 3) + *nbuffers = 3 - q_num_bufs; if (*nplanes) return sizes[0] < sur40->pix_fmt.sizeimage ? -EINVAL : 0; @@ -1123,7 +1124,7 @@ static const struct vb2_queue sur40_queue = { .ops = &sur40_queue_ops, .mem_ops = &vb2_dma_sg_memops, .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC, - .min_buffers_needed = 3, + .min_queued_buffers = 3, }; static const struct v4l2_file_operations sur40_video_fops = { diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index d6d04b9f04..60354ebc72 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -456,8 +456,8 @@ static ssize_t mtouch_firmware_rev_show(struct device *dev, struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); struct mtouch_priv *priv = usbtouch->priv; - return scnprintf(output, PAGE_SIZE, "%1x.%1x\n", - priv->fw_rev_major, priv->fw_rev_minor); + return sysfs_emit(output, "%1x.%1x\n", + priv->fw_rev_major, priv->fw_rev_minor); } static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL); diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index 128341a669..32c7be5443 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -887,7 +887,7 @@ static ssize_t config_csum_show(struct device *dev, cfg_csum = wdt->param.xmls_id1; cfg_csum = (cfg_csum << 16) | wdt->param.xmls_id2; - return scnprintf(buf, PAGE_SIZE, "%x\n", cfg_csum); + return sysfs_emit(buf, "%x\n", cfg_csum); } static ssize_t fw_version_show(struct device *dev, @@ -896,7 +896,7 @@ static ssize_t fw_version_show(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct wdt87xx_data *wdt = i2c_get_clientdata(client); - return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.fw_id); + return sysfs_emit(buf, "%x\n", wdt->param.fw_id); } static ssize_t plat_id_show(struct device *dev, @@ -905,7 +905,7 @@ static ssize_t plat_id_show(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct wdt87xx_data *wdt = i2c_get_clientdata(client); - return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.plat_id); + return sysfs_emit(buf, "%x\n", wdt->param.plat_id); } static ssize_t update_config_store(struct device *dev, diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index 5be5112845..5680075f0b 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -106,6 +107,7 @@ struct zforce_point { struct zforce_ts { struct i2c_client *client; struct input_dev *input; + struct touchscreen_properties prop; const struct zforce_ts_platdata *pdata; char phys[32]; @@ -266,7 +268,6 @@ static int zforce_setconfig(struct zforce_ts *ts, char b1) static int zforce_start(struct zforce_ts *ts) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = ts->pdata; int ret; dev_dbg(&client->dev, "starting device\n"); @@ -277,7 +278,7 @@ static int zforce_start(struct zforce_ts *ts) return ret; } - ret = zforce_resolution(ts, pdata->x_max, pdata->y_max); + ret = zforce_resolution(ts, ts->prop.max_x, ts->prop.max_y); if (ret) { dev_err(&client->dev, "Unable to set resolution, %d\n", ret); goto error; @@ -337,7 +338,6 @@ static int zforce_stop(struct zforce_ts *ts) static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = ts->pdata; struct zforce_point point; int count, i, num = 0; @@ -355,8 +355,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.coord_y = payload[9 * i + 4] << 8 | payload[9 * i + 3]; - if (point.coord_x > pdata->x_max || - point.coord_y > pdata->y_max) { + if (point.coord_x > ts->prop.max_x || + point.coord_y > ts->prop.max_y) { dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", point.coord_x, point.coord_y); point.coord_x = point.coord_y = 0; @@ -390,10 +390,9 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.state != STATE_UP); if (point.state != STATE_UP) { - input_report_abs(ts->input, ABS_MT_POSITION_X, - point.coord_x); - input_report_abs(ts->input, ABS_MT_POSITION_Y, - point.coord_y); + touchscreen_report_pos(ts->input, &ts->prop, + point.coord_x, point.coord_y, + true); input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, point.area_major); input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, @@ -719,15 +718,8 @@ static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); } - if (of_property_read_u32(np, "x-size", &pdata->x_max)) { - dev_err(dev, "failed to get x-size property\n"); - return ERR_PTR(-EINVAL); - } - - if (of_property_read_u32(np, "y-size", &pdata->y_max)) { - dev_err(dev, "failed to get y-size property\n"); - return ERR_PTR(-EINVAL); - } + of_property_read_u32(np, "x-size", &pdata->x_max); + of_property_read_u32(np, "y-size", &pdata->y_max); return pdata; } @@ -856,6 +848,12 @@ static int zforce_probe(struct i2c_client *client) input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + touchscreen_parse_properties(input_dev, true, &ts->prop); + if (ts->prop.max_x == 0 || ts->prop.max_y == 0) { + dev_err(&client->dev, "no size specified\n"); + return -EINVAL; + } + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, ZFORCE_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, diff --git a/drivers/input/vivaldi-fmap.c b/drivers/input/vivaldi-fmap.c index 6dae83d968..0d29ec014e 100644 --- a/drivers/input/vivaldi-fmap.c +++ b/drivers/input/vivaldi-fmap.c @@ -27,10 +27,10 @@ ssize_t vivaldi_function_row_physmap_show(const struct vivaldi_data *data, return 0; for (i = 0; i < data->num_function_row_keys; i++) - size += scnprintf(buf + size, PAGE_SIZE - size, - "%s%02X", size ? " " : "", physmap[i]); + size += sysfs_emit_at(buf, size, + "%s%02X", size ? " " : "", physmap[i]); if (size) - size += scnprintf(buf + size, PAGE_SIZE - size, "\n"); + size += sysfs_emit_at(buf, size, "\n"); return size; } -- cgit v1.2.3