From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/irqchip/Kconfig | 682 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 682 insertions(+) create mode 100644 drivers/irqchip/Kconfig (limited to 'drivers/irqchip/Kconfig') diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig new file mode 100644 index 0000000000..f7149d0f3d --- /dev/null +++ b/drivers/irqchip/Kconfig @@ -0,0 +1,682 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "IRQ chip support" + +config IRQCHIP + def_bool y + depends on (OF_IRQ || ACPI_GENERIC_GSI) + +config ARM_GIC + bool + depends on OF + select IRQ_DOMAIN_HIERARCHY + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config ARM_GIC_PM + bool + depends on PM + select ARM_GIC + +config ARM_GIC_MAX_NR + int + depends on ARM_GIC + default 2 if ARCH_REALVIEW + default 1 + +config ARM_GIC_V2M + bool + depends on PCI + select ARM_GIC + select PCI_MSI + +config GIC_NON_BANKED + bool + +config ARM_GIC_V3 + bool + select IRQ_DOMAIN_HIERARCHY + select PARTITION_PERCPU + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + select HAVE_ARM_SMCCC_DISCOVERY + +config ARM_GIC_V3_ITS + bool + select GENERIC_MSI_IRQ + default ARM_GIC_V3 + +config ARM_GIC_V3_ITS_PCI + bool + depends on ARM_GIC_V3_ITS + depends on PCI + depends on PCI_MSI + default ARM_GIC_V3_ITS + +config ARM_GIC_V3_ITS_FSL_MC + bool + depends on ARM_GIC_V3_ITS + depends on FSL_MC_BUS + default ARM_GIC_V3_ITS + +config ARM_NVIC + bool + select IRQ_DOMAIN_HIERARCHY + select GENERIC_IRQ_CHIP + +config ARM_VIC + bool + select IRQ_DOMAIN + +config ARM_VIC_NR + int + default 4 if ARCH_S5PV210 + default 2 + depends on ARM_VIC + help + The maximum number of VICs available in the system, for + power management. + +config ARMADA_370_XP_IRQ + bool + select GENERIC_IRQ_CHIP + select PCI_MSI if PCI + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config ALPINE_MSI + bool + depends on PCI + select PCI_MSI + select GENERIC_IRQ_CHIP + +config AL_FIC + bool "Amazon's Annapurna Labs Fabric Interrupt Controller" + depends on OF + depends on HAS_IOMEM + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + help + Support Amazon's Annapurna Labs Fabric Interrupt Controller. + +config ATMEL_AIC_IRQ + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select SPARSE_IRQ + +config ATMEL_AIC5_IRQ + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select SPARSE_IRQ + +config I8259 + bool + select IRQ_DOMAIN + +config BCM6345_L1_IRQ + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config BCM7038_L1_IRQ + tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BRCMSTB || BMIPS_GENERIC + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config BCM7120_L2_IRQ + tristate "Broadcom STB 7120-style L2 interrupt controller driver" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BRCMSTB || BMIPS_GENERIC + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config BRCMSTB_L2_IRQ + tristate "Broadcom STB generic L2 interrupt controller driver" + depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config DAVINCI_CP_INTC + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config DW_APB_ICTL + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN_HIERARCHY + +config FARADAY_FTINTC010 + bool + select IRQ_DOMAIN + select SPARSE_IRQ + +config HISILICON_IRQ_MBIGEN + bool + select ARM_GIC_V3 + select ARM_GIC_V3_ITS + +config IMGPDC_IRQ + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config IXP4XX_IRQ + bool + select IRQ_DOMAIN + select SPARSE_IRQ + +config MADERA_IRQ + tristate + +config IRQ_MIPS_CPU + bool + select GENERIC_IRQ_CHIP + select GENERIC_IRQ_IPI if SMP && SYS_SUPPORTS_MULTITHREADING + select IRQ_DOMAIN + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config CLPS711X_IRQCHIP + bool + depends on ARCH_CLPS711X + select IRQ_DOMAIN + select SPARSE_IRQ + default y + +config OMPIC + bool + +config OR1K_PIC + bool + select IRQ_DOMAIN + +config OMAP_IRQCHIP + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config ORION_IRQCHIP + bool + select IRQ_DOMAIN + +config PIC32_EVIC + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config JCORE_AIC + bool "J-Core integrated AIC" if COMPILE_TEST + depends on OF + select IRQ_DOMAIN + help + Support for the J-Core integrated AIC. + +config RDA_INTC + bool + select IRQ_DOMAIN + +config RENESAS_INTC_IRQPIN + bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST + select IRQ_DOMAIN + help + Enable support for the Renesas Interrupt Controller for external + interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs. + +config RENESAS_IRQC + bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + help + Enable support for the Renesas Interrupt Controller for external + devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs. + +config RENESAS_RZA1_IRQC + bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST + select IRQ_DOMAIN_HIERARCHY + help + Enable support for the Renesas RZ/A1 Interrupt Controller, to use up + to 8 external interrupts with configurable sense select. + +config RENESAS_RZG2L_IRQC + bool "Renesas RZ/G2L (and alike SoC) IRQC support" if COMPILE_TEST + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN_HIERARCHY + help + Enable support for the Renesas RZ/G2L (and alike SoC) Interrupt Controller + for external devices. + +config SL28CPLD_INTC + bool "Kontron sl28cpld IRQ controller" + depends on MFD_SL28CPLD=y || COMPILE_TEST + select REGMAP_IRQ + help + Interrupt controller driver for the board management controller + found on the Kontron sl28 CPLD. + +config ST_IRQCHIP + bool + select REGMAP + select MFD_SYSCON + help + Enables SysCfg Controlled IRQs on STi based platforms. + +config SUN4I_INTC + bool + +config SUN6I_R_INTC + bool + select IRQ_DOMAIN_HIERARCHY + select IRQ_FASTEOI_HIERARCHY_HANDLERS + +config SUNXI_NMI_INTC + bool + select GENERIC_IRQ_CHIP + +config TB10X_IRQC + bool + select IRQ_DOMAIN + select GENERIC_IRQ_CHIP + +config TS4800_IRQ + tristate "TS-4800 IRQ controller" + select IRQ_DOMAIN + depends on HAS_IOMEM + depends on SOC_IMX51 || COMPILE_TEST + help + Support for the TS-4800 FPGA IRQ controller + +config VERSATILE_FPGA_IRQ + bool + select IRQ_DOMAIN + +config VERSATILE_FPGA_IRQ_NR + int + default 4 + depends on VERSATILE_FPGA_IRQ + +config XTENSA_MX + bool + select IRQ_DOMAIN + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config XILINX_INTC + bool "Xilinx Interrupt Controller IP" + depends on OF_ADDRESS + select IRQ_DOMAIN + help + Support for the Xilinx Interrupt Controller IP core. + This is used as a primary controller with MicroBlaze and can also + be used as a secondary chained controller on other platforms. + +config IRQ_CROSSBAR + bool + help + Support for a CROSSBAR ip that precedes the main interrupt controller. + The primary irqchip invokes the crossbar's callback which inturn allocates + a free irq and configures the IP. Thus the peripheral interrupts are + routed to one of the free irqchip interrupt lines. + +config KEYSTONE_IRQ + tristate "Keystone 2 IRQ controller IP" + depends on ARCH_KEYSTONE + help + Support for Texas Instruments Keystone 2 IRQ controller IP which + is part of the Keystone 2 IPC mechanism + +config MIPS_GIC + bool + select GENERIC_IRQ_IPI if SMP + select IRQ_DOMAIN_HIERARCHY + select MIPS_CM + +config INGENIC_IRQ + bool + depends on MACH_INGENIC + default y + +config INGENIC_TCU_IRQ + bool "Ingenic JZ47xx TCU interrupt controller" + default MACH_INGENIC + depends on MIPS || COMPILE_TEST + select MFD_SYSCON + select GENERIC_IRQ_CHIP + help + Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic + JZ47xx SoCs. + + If unsure, say N. + +config IMX_GPCV2 + bool + select IRQ_DOMAIN + help + Enables the wakeup IRQs for IMX platforms with GPCv2 block + +config IRQ_MXS + def_bool y if MACH_ASM9260 || ARCH_MXS + select IRQ_DOMAIN + select STMP_DEVICE + +config MSCC_OCELOT_IRQ + bool + select IRQ_DOMAIN + select GENERIC_IRQ_CHIP + +config MVEBU_GICP + bool + +config MVEBU_ICU + bool + +config MVEBU_ODMI + bool + select GENERIC_MSI_IRQ + +config MVEBU_PIC + bool + +config MVEBU_SEI + bool + +config LS_EXTIRQ + def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE + select MFD_SYSCON + +config LS_SCFG_MSI + def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE + depends on PCI_MSI + +config PARTITION_PERCPU + bool + +config STM32_EXTI + bool + select IRQ_DOMAIN + select GENERIC_IRQ_CHIP + +config QCOM_IRQ_COMBINER + bool "QCOM IRQ combiner support" + depends on ARCH_QCOM && ACPI + select IRQ_DOMAIN_HIERARCHY + help + Say yes here to add support for the IRQ combiner devices embedded + in Qualcomm Technologies chips. + +config IRQ_UNIPHIER_AIDET + bool "UniPhier AIDET support" if COMPILE_TEST + depends on ARCH_UNIPHIER || COMPILE_TEST + default ARCH_UNIPHIER + select IRQ_DOMAIN_HIERARCHY + help + Support for the UniPhier AIDET (ARM Interrupt Detector). + +config MESON_IRQ_GPIO + tristate "Meson GPIO Interrupt Multiplexer" + depends on ARCH_MESON || COMPILE_TEST + default ARCH_MESON + select IRQ_DOMAIN_HIERARCHY + help + Support Meson SoC Family GPIO Interrupt Multiplexer + +config GOLDFISH_PIC + bool "Goldfish programmable interrupt controller" + depends on MIPS && (GOLDFISH || COMPILE_TEST) + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + help + Say yes here to enable Goldfish interrupt controller driver used + for Goldfish based virtual platforms. + +config QCOM_PDC + tristate "QCOM PDC" + depends on ARCH_QCOM + select IRQ_DOMAIN_HIERARCHY + help + Power Domain Controller driver to manage and configure wakeup + IRQs for Qualcomm Technologies Inc (QTI) mobile chips. + +config QCOM_MPM + tristate "QCOM MPM" + depends on ARCH_QCOM + depends on MAILBOX + select IRQ_DOMAIN_HIERARCHY + help + MSM Power Manager driver to manage and configure wakeup + IRQs for Qualcomm Technologies Inc (QTI) mobile chips. + +config CSKY_MPINTC + bool + depends on CSKY + help + Say yes here to enable C-SKY SMP interrupt controller driver used + for C-SKY SMP system. + In fact it's not mmio map in hardware and it uses ld/st to visit the + controller's register inside CPU. + +config CSKY_APB_INTC + bool "C-SKY APB Interrupt Controller" + depends on CSKY + help + Say yes here to enable C-SKY APB interrupt controller driver used + by C-SKY single core SOC system. It uses mmio map apb-bus to visit + the controller's register. + +config IMX_IRQSTEER + bool "i.MX IRQSTEER support" + depends on ARCH_MXC || COMPILE_TEST + default ARCH_MXC + select IRQ_DOMAIN + help + Support for the i.MX IRQSTEER interrupt multiplexer/remapper. + +config IMX_INTMUX + bool "i.MX INTMUX support" if COMPILE_TEST + default y if ARCH_MXC + select IRQ_DOMAIN + help + Support for the i.MX INTMUX interrupt multiplexer. + +config IMX_MU_MSI + tristate "i.MX MU used as MSI controller" + depends on OF && HAS_IOMEM + depends on ARCH_MXC || COMPILE_TEST + default m if ARCH_MXC + select IRQ_DOMAIN + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ + help + Provide a driver for the i.MX Messaging Unit block used as a + CPU-to-CPU MSI controller. This requires a specially crafted DT + to make use of this driver. + + If unsure, say N + +config LS1X_IRQ + bool "Loongson-1 Interrupt Controller" + depends on MACH_LOONGSON32 + default y + select IRQ_DOMAIN + select GENERIC_IRQ_CHIP + help + Support for the Loongson-1 platform Interrupt Controller. + +config TI_SCI_INTR_IRQCHIP + bool + depends on TI_SCI_PROTOCOL + select IRQ_DOMAIN_HIERARCHY + help + This enables the irqchip driver support for K3 Interrupt router + over TI System Control Interface available on some new TI's SoCs. + If you wish to use interrupt router irq resources managed by the + TI System Controller, say Y here. Otherwise, say N. + +config TI_SCI_INTA_IRQCHIP + bool + depends on TI_SCI_PROTOCOL + select IRQ_DOMAIN_HIERARCHY + select TI_SCI_INTA_MSI_DOMAIN + help + This enables the irqchip driver support for K3 Interrupt aggregator + over TI System Control Interface available on some new TI's SoCs. + If you wish to use interrupt aggregator irq resources managed by the + TI System Controller, say Y here. Otherwise, say N. + +config TI_PRUSS_INTC + tristate + depends on TI_PRUSS + default TI_PRUSS + select IRQ_DOMAIN + help + This enables support for the PRU-ICSS Local Interrupt Controller + present within a PRU-ICSS subsystem present on various TI SoCs. + The PRUSS INTC enables various interrupts to be routed to multiple + different processors within the SoC. + +config RISCV_INTC + bool + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + +config SIFIVE_PLIC + bool + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP + +config EXYNOS_IRQ_COMBINER + bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST + depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST + help + Say yes here to add support for the IRQ combiner devices embedded + in Samsung Exynos chips. + +config IRQ_LOONGARCH_CPU + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select GENERIC_IRQ_EFFECTIVE_AFF_MASK + select LOONGSON_HTVEC + select LOONGSON_LIOINTC + select LOONGSON_EIOINTC + select LOONGSON_PCH_PIC + select LOONGSON_PCH_MSI + select LOONGSON_PCH_LPC + help + Support for the LoongArch CPU Interrupt Controller. For details of + irq chip hierarchy on LoongArch platforms please read the document + Documentation/arch/loongarch/irq-chip-model.rst. + +config LOONGSON_LIOINTC + bool "Loongson Local I/O Interrupt Controller" + depends on MACH_LOONGSON64 + default y + select IRQ_DOMAIN + select GENERIC_IRQ_CHIP + help + Support for the Loongson Local I/O Interrupt Controller. + +config LOONGSON_EIOINTC + bool "Loongson Extend I/O Interrupt Controller" + depends on LOONGARCH + depends on MACH_LOONGSON64 + default MACH_LOONGSON64 + select IRQ_DOMAIN_HIERARCHY + select GENERIC_IRQ_CHIP + help + Support for the Loongson3 Extend I/O Interrupt Vector Controller. + +config LOONGSON_HTPIC + bool "Loongson3 HyperTransport PIC Controller" + depends on MACH_LOONGSON64 && MIPS + default y + select IRQ_DOMAIN + select GENERIC_IRQ_CHIP + help + Support for the Loongson-3 HyperTransport PIC Controller. + +config LOONGSON_HTVEC + bool "Loongson HyperTransport Interrupt Vector Controller" + depends on MACH_LOONGSON64 + default MACH_LOONGSON64 + select IRQ_DOMAIN_HIERARCHY + help + Support for the Loongson HyperTransport Interrupt Vector Controller. + +config LOONGSON_PCH_PIC + bool "Loongson PCH PIC Controller" + depends on MACH_LOONGSON64 + default MACH_LOONGSON64 + select IRQ_DOMAIN_HIERARCHY + select IRQ_FASTEOI_HIERARCHY_HANDLERS + help + Support for the Loongson PCH PIC Controller. + +config LOONGSON_PCH_MSI + bool "Loongson PCH MSI Controller" + depends on MACH_LOONGSON64 + depends on PCI + default MACH_LOONGSON64 + select IRQ_DOMAIN_HIERARCHY + select PCI_MSI + help + Support for the Loongson PCH MSI Controller. + +config LOONGSON_PCH_LPC + bool "Loongson PCH LPC Controller" + depends on LOONGARCH + depends on MACH_LOONGSON64 + default MACH_LOONGSON64 + select IRQ_DOMAIN_HIERARCHY + help + Support for the Loongson PCH LPC Controller. + +config MST_IRQ + bool "MStar Interrupt Controller" + depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST + default ARCH_MEDIATEK + select IRQ_DOMAIN + select IRQ_DOMAIN_HIERARCHY + help + Support MStar Interrupt Controller. + +config WPCM450_AIC + bool "Nuvoton WPCM450 Advanced Interrupt Controller" + depends on ARCH_WPCM450 + help + Support for the interrupt controller in the Nuvoton WPCM450 BMC SoC. + +config IRQ_IDT3243X + bool + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config APPLE_AIC + bool "Apple Interrupt Controller (AIC)" + depends on ARM64 + depends on ARCH_APPLE || COMPILE_TEST + select GENERIC_IRQ_IPI_MUX + help + Support for the Apple Interrupt Controller found on Apple Silicon SoCs, + such as the M1. + +config MCHP_EIC + bool "Microchip External Interrupt Controller" + depends on ARCH_AT91 || COMPILE_TEST + select IRQ_DOMAIN + select IRQ_DOMAIN_HIERARCHY + help + Support for Microchip External Interrupt Controller. + +config SUNPLUS_SP7021_INTC + bool "Sunplus SP7021 interrupt controller" if COMPILE_TEST + default SOC_SP7021 + help + Support for the Sunplus SP7021 Interrupt Controller IP core. + SP7021 SoC has 2 Chips: C-Chip & P-Chip. This is used as a + chained controller, routing all interrupt source in P-Chip to + the primary controller on C-Chip. + +endmenu -- cgit v1.2.3