From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/irqchip/irq-bcm2835.c | 263 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 drivers/irqchip/irq-bcm2835.c (limited to 'drivers/irqchip/irq-bcm2835.c') diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c new file mode 100644 index 0000000000..e94e288228 --- /dev/null +++ b/drivers/irqchip/irq-bcm2835.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2010 Broadcom + * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren + * + * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits + * + * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8 + * on bank 0 is set to signify that an interrupt in bank 1 has fired, and + * to look in the bank 1 status register for more information. + * + * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its + * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1 + * status register, but bank 0 bit 8 is _not_ set. + * + * Quirk 2: You can't mask the register 1/2 pending interrupts + * + * In a proper cascaded interrupt controller, the interrupt lines with + * cascaded interrupt controllers on them are just normal interrupt lines. + * You can mask the interrupts and get on with things. With this controller + * you can't do that. + * + * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0 + * + * Those interrupts that have shortcuts can only be masked/unmasked in + * their respective banks' enable/disable registers. Doing so in the bank 0 + * enable/disable registers has no effect. + * + * The FIQ control register: + * Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0) + * Bit 7: Enable FIQ generation + * Bits 8+: Unused + * + * An interrupt must be disabled before configuring it for FIQ generation + * otherwise both handlers will fire at the same time! + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* Put the bank and irq (32 bits) into the hwirq */ +#define MAKE_HWIRQ(b, n) ((b << 5) | (n)) +#define HWIRQ_BANK(i) (i >> 5) +#define HWIRQ_BIT(i) BIT(i & 0x1f) + +#define NR_IRQS_BANK0 8 +#define BANK0_HWIRQ_MASK 0xff +/* Shortcuts can't be disabled so any unknown new ones need to be masked */ +#define SHORTCUT1_MASK 0x00007c00 +#define SHORTCUT2_MASK 0x001f8000 +#define SHORTCUT_SHIFT 10 +#define BANK1_HWIRQ BIT(8) +#define BANK2_HWIRQ BIT(9) +#define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \ + | SHORTCUT1_MASK | SHORTCUT2_MASK) + +#define REG_FIQ_CONTROL 0x0c +#define FIQ_CONTROL_ENABLE BIT(7) + +#define NR_BANKS 3 +#define IRQS_PER_BANK 32 + +static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; +static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; +static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 }; +static const int bank_irqs[] __initconst = { 8, 32, 32 }; + +static const int shortcuts[] = { + 7, 9, 10, 18, 19, /* Bank 1 */ + 21, 22, 23, 24, 25, 30 /* Bank 2 */ +}; + +struct armctrl_ic { + void __iomem *base; + void __iomem *pending[NR_BANKS]; + void __iomem *enable[NR_BANKS]; + void __iomem *disable[NR_BANKS]; + struct irq_domain *domain; +}; + +static struct armctrl_ic intc __read_mostly; +static void __exception_irq_entry bcm2835_handle_irq( + struct pt_regs *regs); +static void bcm2836_chained_handle_irq(struct irq_desc *desc); + +static void armctrl_mask_irq(struct irq_data *d) +{ + writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]); +} + +static void armctrl_unmask_irq(struct irq_data *d) +{ + writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]); +} + +static struct irq_chip armctrl_chip = { + .name = "ARMCTRL-level", + .irq_mask = armctrl_mask_irq, + .irq_unmask = armctrl_unmask_irq +}; + +static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize != 2)) + return -EINVAL; + + if (WARN_ON(intspec[0] >= NR_BANKS)) + return -EINVAL; + + if (WARN_ON(intspec[1] >= IRQS_PER_BANK)) + return -EINVAL; + + if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0)) + return -EINVAL; + + *out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]); + *out_type = IRQ_TYPE_NONE; + return 0; +} + +static const struct irq_domain_ops armctrl_ops = { + .xlate = armctrl_xlate +}; + +static int __init armctrl_of_init(struct device_node *node, + struct device_node *parent, + bool is_2836) +{ + void __iomem *base; + int irq, b, i; + u32 reg; + + base = of_iomap(node, 0); + if (!base) + panic("%pOF: unable to map IC registers\n", node); + + intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0), + &armctrl_ops, NULL); + if (!intc.domain) + panic("%pOF: unable to create IRQ domain\n", node); + + for (b = 0; b < NR_BANKS; b++) { + intc.pending[b] = base + reg_pending[b]; + intc.enable[b] = base + reg_enable[b]; + intc.disable[b] = base + reg_disable[b]; + + for (i = 0; i < bank_irqs[b]; i++) { + irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i)); + BUG_ON(irq <= 0); + irq_set_chip_and_handler(irq, &armctrl_chip, + handle_level_irq); + irq_set_probe(irq); + } + + reg = readl_relaxed(intc.enable[b]); + if (reg) { + writel_relaxed(reg, intc.disable[b]); + pr_err(FW_BUG "Bootloader left irq enabled: " + "bank %d irq %*pbl\n", b, IRQS_PER_BANK, ®); + } + } + + reg = readl_relaxed(base + REG_FIQ_CONTROL); + if (reg & FIQ_CONTROL_ENABLE) { + writel_relaxed(0, base + REG_FIQ_CONTROL); + pr_err(FW_BUG "Bootloader left fiq enabled\n"); + } + + if (is_2836) { + int parent_irq = irq_of_parse_and_map(node, 0); + + if (!parent_irq) { + panic("%pOF: unable to get parent interrupt.\n", + node); + } + irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq); + } else { + set_handle_irq(bcm2835_handle_irq); + } + + return 0; +} + +static int __init bcm2835_armctrl_of_init(struct device_node *node, + struct device_node *parent) +{ + return armctrl_of_init(node, parent, false); +} + +static int __init bcm2836_armctrl_of_init(struct device_node *node, + struct device_node *parent) +{ + return armctrl_of_init(node, parent, true); +} + + +/* + * Handle each interrupt across the entire interrupt controller. This reads the + * status register before handling each interrupt, which is necessary given that + * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. + */ + +static u32 armctrl_translate_bank(int bank) +{ + u32 stat = readl_relaxed(intc.pending[bank]); + + return MAKE_HWIRQ(bank, ffs(stat) - 1); +} + +static u32 armctrl_translate_shortcut(int bank, u32 stat) +{ + return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]); +} + +static u32 get_next_armctrl_hwirq(void) +{ + u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK; + + if (stat == 0) + return ~0; + else if (stat & BANK0_HWIRQ_MASK) + return MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1); + else if (stat & SHORTCUT1_MASK) + return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK); + else if (stat & SHORTCUT2_MASK) + return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK); + else if (stat & BANK1_HWIRQ) + return armctrl_translate_bank(1); + else if (stat & BANK2_HWIRQ) + return armctrl_translate_bank(2); + else + BUG(); +} + +static void __exception_irq_entry bcm2835_handle_irq( + struct pt_regs *regs) +{ + u32 hwirq; + + while ((hwirq = get_next_armctrl_hwirq()) != ~0) + generic_handle_domain_irq(intc.domain, hwirq); +} + +static void bcm2836_chained_handle_irq(struct irq_desc *desc) +{ + u32 hwirq; + + while ((hwirq = get_next_armctrl_hwirq()) != ~0) + generic_handle_domain_irq(intc.domain, hwirq); +} + +IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", + bcm2835_armctrl_of_init); +IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic", + bcm2836_armctrl_of_init); -- cgit v1.2.3