From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/media/i2c/Kconfig | 1493 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1493 insertions(+) create mode 100644 drivers/media/i2c/Kconfig (limited to 'drivers/media/i2c/Kconfig') diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig new file mode 100644 index 0000000000..53b443be5a --- /dev/null +++ b/drivers/media/i2c/Kconfig @@ -0,0 +1,1493 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Multimedia Video device configuration +# + +if VIDEO_DEV + +comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'" + depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE + +config VIDEO_IR_I2C + tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT + depends on I2C && RC_CORE + default y + help + Most boards have an IR chip directly connected via GPIO. However, + some video boards have the IR connected via I2C bus. + + If your board doesn't have an I2C IR chip, you may disable this + option. + + In doubt, say Y. + +# +# V4L2 I2C drivers that are related with Camera support +# + +menuconfig VIDEO_CAMERA_SENSOR + bool "Camera sensor devices" + depends on MEDIA_CAMERA_SUPPORT && I2C + select MEDIA_CONTROLLER + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + default y + +if VIDEO_CAMERA_SENSOR + +config VIDEO_APTINA_PLL + tristate + +config VIDEO_CCS_PLL + tristate + +config VIDEO_AR0521 + tristate "ON Semiconductor AR0521 sensor support" + help + This is a Video4Linux2 sensor driver for the ON Semiconductor + AR0521 camera. + + To compile this driver as a module, choose M here: the + module will be called ar0521. + +config VIDEO_HI556 + tristate "Hynix Hi-556 sensor support" + help + This is a Video4Linux2 sensor driver for the Hynix + Hi-556 camera. + + To compile this driver as a module, choose M here: the + module will be called hi556. + +config VIDEO_HI846 + tristate "Hynix Hi-846 sensor support" + help + This is a Video4Linux2 sensor driver for the Hynix + Hi-846 camera. + + To compile this driver as a module, choose M here: the + module will be called hi846. + +config VIDEO_HI847 + tristate "Hynix Hi-847 sensor support" + help + This is a Video4Linux2 sensor driver for the Hynix + Hi-847 camera. + + To compile this driver as a module, choose M here: the + module will be called hi847. + +config VIDEO_IMX208 + tristate "Sony IMX208 sensor support" + help + This is a Video4Linux2 sensor driver for the Sony + IMX208 camera. + + To compile this driver as a module, choose M here: the + module will be called imx208. + +config VIDEO_IMX214 + tristate "Sony IMX214 sensor support" + depends on GPIOLIB + select REGMAP_I2C + help + This is a Video4Linux2 sensor driver for the Sony + IMX214 camera. + + To compile this driver as a module, choose M here: the + module will be called imx214. + +config VIDEO_IMX219 + tristate "Sony IMX219 sensor support" + select V4L2_CCI_I2C + help + This is a Video4Linux2 sensor driver for the Sony + IMX219 camera. + + To compile this driver as a module, choose M here: the + module will be called imx219. + +config VIDEO_IMX258 + tristate "Sony IMX258 sensor support" + help + This is a Video4Linux2 sensor driver for the Sony + IMX258 camera. + + To compile this driver as a module, choose M here: the + module will be called imx258. + +config VIDEO_IMX274 + tristate "Sony IMX274 sensor support" + select REGMAP_I2C + help + This is a V4L2 sensor driver for the Sony IMX274 + CMOS image sensor. + +config VIDEO_IMX290 + tristate "Sony IMX290 sensor support" + select REGMAP_I2C + select V4L2_CCI_I2C + help + This is a Video4Linux2 sensor driver for the Sony + IMX290 camera sensor. + + To compile this driver as a module, choose M here: the + module will be called imx290. + +config VIDEO_IMX296 + tristate "Sony IMX296 sensor support" + help + This is a Video4Linux2 sensor driver for the Sony + IMX296 camera. + + To compile this driver as a module, choose M here: the + module will be called imx296. + +config VIDEO_IMX319 + tristate "Sony IMX319 sensor support" + help + This is a Video4Linux2 sensor driver for the Sony + IMX319 camera. + + To compile this driver as a module, choose M here: the + module will be called imx319. + +config VIDEO_IMX334 + tristate "Sony IMX334 sensor support" + depends on OF_GPIO + help + This is a Video4Linux2 sensor driver for the Sony + IMX334 camera. + + To compile this driver as a module, choose M here: the + module will be called imx334. + +config VIDEO_IMX335 + tristate "Sony IMX335 sensor support" + depends on OF_GPIO + help + This is a Video4Linux2 sensor driver for the Sony + IMX335 camera. + + To compile this driver as a module, choose M here: the + module will be called imx335. + +config VIDEO_IMX355 + tristate "Sony IMX355 sensor support" + help + This is a Video4Linux2 sensor driver for the Sony + IMX355 camera. + + To compile this driver as a module, choose M here: the + module will be called imx355. + +config VIDEO_IMX412 + tristate "Sony IMX412 sensor support" + depends on OF_GPIO + help + This is a Video4Linux2 sensor driver for the Sony + IMX412 camera. + + To compile this driver as a module, choose M here: the + module will be called imx412. + +config VIDEO_IMX415 + tristate "Sony IMX415 sensor support" + depends on OF_GPIO + help + This is a Video4Linux2 sensor driver for the Sony + IMX415 camera. + + To compile this driver as a module, choose M here: the + module will be called imx415. + +config VIDEO_MAX9271_LIB + tristate + +config VIDEO_MT9M001 + tristate "mt9m001 support" + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config VIDEO_MT9M111 + tristate "mt9m111, mt9m112 and mt9m131 support" + help + This driver supports MT9M111, MT9M112 and MT9M131 cameras from + Micron/Aptina + +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + select VIDEO_APTINA_PLL + help + This is a Video4Linux2 sensor driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + +config VIDEO_MT9T112 + tristate "Aptina MT9T111/MT9T112 support" + help + This is a Video4Linux2 sensor driver for the Aptina + (Micron) MT9T111 and MT9T112 3 Mpixel camera. + + To compile this driver as a module, choose M here: the + module will be called mt9t112. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + help + This is a Video4Linux2 sensor driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + select REGMAP_I2C + help + This is a Video4Linux2 sensor driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_MT9V111 + tristate "Aptina MT9V111 sensor support" + help + This is a Video4Linux2 sensor driver for the Aptina/Micron + MT9V111 sensor. + + To compile this driver as a module, choose M here: the + module will be called mt9v111. + +config VIDEO_OG01A1B + tristate "OmniVision OG01A1B sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OG01A1B camera. + + To compile this driver as a module, choose M here: the + module will be called og01a1b. + +config VIDEO_OV01A10 + tristate "OmniVision OV01A10 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV01A10 camera. + + To compile this driver as a module, choose M here: the + module will be called ov01a10. + +config VIDEO_OV02A10 + tristate "OmniVision OV02A10 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV02A10 camera. + + To compile this driver as a module, choose M here: the + module will be called ov02a10. + +config VIDEO_OV08D10 + tristate "OmniVision OV08D10 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV08D10 camera sensor. + + To compile this driver as a module, choose M here: the + module will be called ov08d10. + +config VIDEO_OV08X40 + tristate "OmniVision OV08X40 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV08X40 camera. + + To compile this driver as a module, choose M here: the + module will be called ov08x40. + +config VIDEO_OV13858 + tristate "OmniVision OV13858 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV13858 camera. + +config VIDEO_OV13B10 + tristate "OmniVision OV13B10 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV13B10 camera. + +config VIDEO_OV2640 + tristate "OmniVision OV2640 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV2640 camera. + + To compile this driver as a module, choose M here: the + module will be called ov2640. + +config VIDEO_OV2659 + tristate "OmniVision OV2659 sensor support" + depends on GPIOLIB + help + This is a Video4Linux2 sensor driver for the OmniVision + OV2659 camera. + + To compile this driver as a module, choose M here: the + module will be called ov2659. + +config VIDEO_OV2680 + tristate "OmniVision OV2680 sensor support" + select V4L2_CCI_I2C + help + This is a Video4Linux2 sensor driver for the OmniVision + OV2680 camera. + + To compile this driver as a module, choose M here: the + module will be called ov2680. + +config VIDEO_OV2685 + tristate "OmniVision OV2685 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV2685 camera. + + To compile this driver as a module, choose M here: the + module will be called ov2685. + +config VIDEO_OV2740 + tristate "OmniVision OV2740 sensor support" + depends on ACPI || COMPILE_TEST + select REGMAP_I2C + help + This is a Video4Linux2 sensor driver for the OmniVision + OV2740 camera. + + To compile this driver as a module, choose M here: the + module will be called ov2740. + +config VIDEO_OV4689 + tristate "OmniVision OV4689 sensor support" + depends on GPIOLIB + help + This is a Video4Linux2 sensor-level driver for the OmniVision + OV4689 camera. + + To compile this driver as a module, choose M here: the + module will be called ov4689. + +config VIDEO_OV5640 + tristate "OmniVision OV5640 sensor support" + depends on OF + depends on GPIOLIB + help + This is a Video4Linux2 sensor driver for the Omnivision + OV5640 camera sensor with a MIPI CSI-2 interface. + +config VIDEO_OV5645 + tristate "OmniVision OV5645 sensor support" + depends on OF + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5645 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5645. + +config VIDEO_OV5647 + tristate "OmniVision OV5647 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5647 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5647. + +config VIDEO_OV5648 + tristate "OmniVision OV5648 sensor support" + depends on PM + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5648 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5648. + +config VIDEO_OV5670 + tristate "OmniVision OV5670 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5670 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5670. + +config VIDEO_OV5675 + tristate "OmniVision OV5675 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5675 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5675. + +config VIDEO_OV5693 + tristate "OmniVision OV5693 sensor support" + select V4L2_CCI_I2C + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5693 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5693. + +config VIDEO_OV5695 + tristate "OmniVision OV5695 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV5695 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5695. + +config VIDEO_OV6650 + tristate "OmniVision OV6650 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV6650 camera. + + To compile this driver as a module, choose M here: the + module will be called ov6650. + +config VIDEO_OV7251 + tristate "OmniVision OV7251 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV7251 camera. + + To compile this driver as a module, choose M here: the + module will be called ov7251. + +config VIDEO_OV7640 + tristate "OmniVision OV7640 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV7640 camera. + + To compile this driver as a module, choose M here: the + module will be called ov7640. + +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + +config VIDEO_OV772X + tristate "OmniVision OV772x sensor support" + select REGMAP_SCCB + help + This is a Video4Linux2 sensor driver for the OmniVision + OV772x camera. + + To compile this driver as a module, choose M here: the + module will be called ov772x. + +config VIDEO_OV7740 + tristate "OmniVision OV7740 sensor support" + select REGMAP_SCCB + help + This is a Video4Linux2 sensor driver for the OmniVision + OV7740 VGA camera sensor. + +config VIDEO_OV8856 + tristate "OmniVision OV8856 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV8856 camera sensor. + + To compile this driver as a module, choose M here: the + module will be called ov8856. + +config VIDEO_OV8858 + tristate "OmniVision OV8858 sensor support" + depends on PM + help + This is a Video4Linux2 sensor driver for OmniVision + OV8858 camera sensor. + + To compile this driver as a module, choose M here: the + module will be called ov8858. + +config VIDEO_OV8865 + tristate "OmniVision OV8865 sensor support" + depends on PM + help + This is a Video4Linux2 sensor driver for OmniVision + OV8865 camera sensor. + + To compile this driver as a module, choose M here: the + module will be called ov8865. + +config VIDEO_OV9282 + tristate "OmniVision OV9282 sensor support" + depends on OF_GPIO + help + This is a Video4Linux2 sensor driver for the OmniVision + OV9282 camera sensor. + + To compile this driver as a module, choose M here: the + module will be called ov9282. + +config VIDEO_OV9640 + tristate "OmniVision OV9640 sensor support" + help + This is a Video4Linux2 sensor driver for the OmniVision + OV9640 camera sensor. + +config VIDEO_OV9650 + tristate "OmniVision OV9650/OV9652 sensor support" + select REGMAP_SCCB + help + This is a V4L2 sensor driver for the Omnivision + OV9650 and OV9652 camera sensors. + +config VIDEO_OV9734 + tristate "OmniVision OV9734 sensor support" + depends on ACPI || COMPILE_TEST + help + This is a Video4Linux2 sensor driver for the OmniVision + OV9734 camera. + + To compile this driver as a module, choose M here: the + module's name is ov9734. + +config VIDEO_RDACM20 + tristate "IMI RDACM20 camera support" + select VIDEO_MAX9271_LIB + help + This driver supports the IMI RDACM20 GMSL camera, used in + ADAS systems. + + This camera should be used in conjunction with a GMSL + deserialiser such as the MAX9286. + +config VIDEO_RDACM21 + tristate "IMI RDACM21 camera support" + select VIDEO_MAX9271_LIB + help + This driver supports the IMI RDACM21 GMSL camera, used in + ADAS systems. + + This camera should be used in conjunction with a GMSL + deserialiser such as the MAX9286. + +config VIDEO_RJ54N1 + tristate "Sharp RJ54N1CB0C sensor support" + help + This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image + sensor. + + To compile this driver as a module, choose M here: the + module will be called rj54n1. + +config VIDEO_S5C73M3 + tristate "Samsung S5C73M3 sensor support" + depends on SPI + help + This is a V4L2 sensor driver for Samsung S5C73M3 + 8 Mpixel camera. + +config VIDEO_S5K5BAF + tristate "Samsung S5K5BAF sensor support" + help + This is a V4L2 sensor driver for Samsung S5K5BAF 2M + camera sensor with an embedded SoC image signal processor. + +config VIDEO_S5K6A3 + tristate "Samsung S5K6A3 sensor support" + help + This is a V4L2 sensor driver for Samsung S5K6A3 raw + camera sensor. + +config VIDEO_ST_VGXY61 + tristate "ST VGXY61 sensor support" + depends on OF && GPIOLIB + help + This is a Video4Linux2 sensor driver for the ST VGXY61 + camera sensor. + +source "drivers/media/i2c/ccs/Kconfig" +source "drivers/media/i2c/et8ek8/Kconfig" + +endif + +menu "Lens drivers" + visible if MEDIA_CAMERA_SUPPORT + +config VIDEO_AD5820 + tristate "AD5820 lens voice coil support" + depends on GPIOLIB && I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select V4L2_ASYNC + help + This is a driver for the AD5820 camera lens voice coil. + It is used for example in Nokia N900 (RX-51). + +config VIDEO_AK7375 + tristate "AK7375 lens voice coil support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_ASYNC + help + This is a driver for the AK7375 camera lens voice coil. + AK7375 is a 12 bit DAC with 120mA output current sink + capability. This is designed for linear control of + voice coil motors, controlled via I2C serial interface. + +config VIDEO_DW9714 + tristate "DW9714 lens voice coil support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_ASYNC + help + This is a driver for the DW9714 camera lens voice coil. + DW9714 is a 10 bit DAC with 120mA output current sink + capability. This is designed for linear control of + voice coil motors, controlled via I2C serial interface. + +config VIDEO_DW9719 + tristate "DW9719 lens voice coil support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_ASYNC + select V4L2_CCI_I2C + help + This is a driver for the DW9719 camera lens voice coil. + This is designed for linear control of voice coil motors, + controlled via I2C serial interface. + +config VIDEO_DW9768 + tristate "DW9768 lens voice coil support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + This is a driver for the DW9768 camera lens voice coil. + DW9768 is a 10 bit DAC with 100mA output current sink + capability. This is designed for linear control of + voice coil motors, controlled via I2C serial interface. + +config VIDEO_DW9807_VCM + tristate "DW9807 lens voice coil support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_ASYNC + help + This is a driver for the DW9807 camera lens voice coil. + DW9807 is a 10 bit DAC with 100mA output current sink + capability. This is designed for linear control of + voice coil motors, controlled via I2C serial interface. + +endmenu + +menu "Flash devices" + visible if MEDIA_CAMERA_SUPPORT + +config VIDEO_ADP1653 + tristate "ADP1653 flash support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select V4L2_ASYNC + help + This is a driver for the ADP1653 flash controller. It is used for + example in Nokia N900. + +config VIDEO_LM3560 + tristate "LM3560 dual flash driver support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select REGMAP_I2C + select V4L2_ASYNC + help + This is a driver for the lm3560 dual flash controllers. It controls + flash, torch LEDs. + +config VIDEO_LM3646 + tristate "LM3646 dual flash driver support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select REGMAP_I2C + select V4L2_ASYNC + help + This is a driver for the lm3646 dual flash controllers. It controls + flash, torch LEDs. + +endmenu + +# +# V4L2 I2C drivers that aren't related with Camera support +# + +comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'" + depends on MEDIA_HIDE_ANCILLARY_SUBDRV +# +# Encoder / Decoder module configuration +# + +menu "Audio decoders, processors and mixers" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_CS3308 + tristate "Cirrus Logic CS3308 audio ADC" + depends on VIDEO_DEV && I2C + help + Support for the Cirrus Logic CS3308 High Performance 8-Channel + Analog Volume Control + + To compile this driver as a module, choose M here: the + module will be called cs3308. + +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" + depends on VIDEO_DEV && I2C + help + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs5345. + +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" + depends on VIDEO_DEV && I2C + help + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs53l32a. + +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_DEV && I2C + help + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400. + +config VIDEO_SONY_BTF_MPX + tristate "Sony BTF's internal MPX" + depends on VIDEO_DEV && I2C + help + Support for the internal MPX of the Sony BTF-PG472Z tuner. + + To compile this driver as a module, choose M here: the + module will be called sony-btf-mpx. + +config VIDEO_TDA1997X + tristate "NXP TDA1997x HDMI receiver" + depends on VIDEO_DEV && I2C + depends on SND_SOC + select HDMI + select SND_PCM + select V4L2_FWNODE + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + help + V4L2 subdevice driver for the NXP TDA1997x HDMI receivers. + + To compile this driver as a module, choose M here: the + module will be called tda1997x. + +config VIDEO_TDA7432 + tristate "Philips TDA7432 audio processor" + depends on VIDEO_DEV && I2C + help + Support for tda7432 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tda7432. + +config VIDEO_TDA9840 + tristate "Philips TDA9840 audio processor" + depends on I2C + help + Support for tda9840 audio decoder chip found on some Zoran boards. + + To compile this driver as a module, choose M here: the + module will be called tda9840. + +config VIDEO_TEA6415C + tristate "Philips TEA6415C audio processor" + depends on I2C + help + Support for tea6415c audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6415c. + +config VIDEO_TEA6420 + tristate "Philips TEA6420 audio processor" + depends on I2C + help + Support for tea6420 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6420. + +config VIDEO_TLV320AIC23B + tristate "Texas Instruments TLV320AIC23B audio codec" + depends on VIDEO_DEV && I2C + help + Support for the Texas Instruments TLV320AIC23B audio codec. + + To compile this driver as a module, choose M here: the + module will be called tlv320aic23b. + +config VIDEO_TVAUDIO + tristate "Simple audio decoder chips" + depends on VIDEO_DEV && I2C + help + Support for several audio decoder chips found on some bt8xx boards: + Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, + tea6320, tea6420, tda8425, ta8874z. + Microchip: pic16c54 based design on ProVideo PV951 board. + + To compile this driver as a module, choose M here: the + module will be called tvaudio. + +config VIDEO_UDA1342 + tristate "Philips UDA1342 audio codec" + depends on VIDEO_DEV && I2C + help + Support for the Philips UDA1342 audio codec. + + To compile this driver as a module, choose M here: the + module will be called uda1342. + +config VIDEO_VP27SMPX + tristate "Panasonic VP27's internal MPX" + depends on VIDEO_DEV && I2C + help + Support for the internal MPX of the Panasonic VP27s tuner. + + To compile this driver as a module, choose M here: the + module will be called vp27smpx. + +config VIDEO_WM8739 + tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + depends on VIDEO_DEV && I2C + help + Support for the Wolfson Microelectronics WM8739 + stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8739. + +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" + depends on VIDEO_DEV && I2C + help + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. + + To compile this driver as a module, choose M here: the + module will be called wm8775. + +endmenu + +menu "RDS decoders" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_SAA6588 + tristate "SAA6588 Radio Chip RDS decoder support" + depends on VIDEO_DEV && I2C + + help + Support for this Radio Data System (RDS) decoder. This allows + seeing radio station identification transmitted using this + standard. + + To compile this driver as a module, choose M here: the + module will be called saa6588. + +endmenu + +menu "Video decoders" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_ADV7180 + tristate "Analog Devices ADV7180 decoder" + depends on GPIOLIB && VIDEO_DEV && I2C + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_ASYNC + help + Support for the Analog Devices ADV7180 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7180. + +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_DEV && I2C + help + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + +config VIDEO_ADV748X + tristate "Analog Devices ADV748x decoder" + depends on VIDEO_DEV && I2C + depends on OF + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select REGMAP_I2C + select V4L2_FWNODE + help + V4L2 subdevice driver for the Analog Devices + ADV7481 and ADV7482 HDMI/Analog video decoders. + + To compile this driver as a module, choose M here: the + module will be called adv748x. + +config VIDEO_ADV7604 + tristate "Analog Devices ADV7604 decoder" + depends on VIDEO_DEV && I2C + depends on GPIOLIB || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select REGMAP_I2C + select HDMI + select V4L2_FWNODE + help + Support for the Analog Devices ADV7604 video decoder. + + This is a Analog Devices Component/Graphics Digitizer + with 4:1 Multiplexed HDMI Receiver. + + To compile this driver as a module, choose M here: the + module will be called adv7604. + +config VIDEO_ADV7604_CEC + bool "Enable Analog Devices ADV7604 CEC support" + depends on VIDEO_ADV7604 + select CEC_CORE + help + When selected the adv7604 will support the optional + HDMI CEC feature. + +config VIDEO_ADV7842 + tristate "Analog Devices ADV7842 decoder" + depends on VIDEO_DEV && I2C + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select HDMI + help + Support for the Analog Devices ADV7842 video decoder. + + This is a Analog Devices Component/Graphics/SD Digitizer + with 2:1 Multiplexed HDMI Receiver. + + To compile this driver as a module, choose M here: the + module will be called adv7842. + +config VIDEO_ADV7842_CEC + bool "Enable Analog Devices ADV7842 CEC support" + depends on VIDEO_ADV7842 + select CEC_CORE + help + When selected the adv7842 will support the optional + HDMI CEC feature. + +config VIDEO_BT819 + tristate "BT819A VideoStream decoder" + depends on VIDEO_DEV && I2C + help + Support for BT819A video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt819. + +config VIDEO_BT856 + tristate "BT856 VideoStream decoder" + depends on VIDEO_DEV && I2C + help + Support for BT856 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt856. + +config VIDEO_BT866 + tristate "BT866 VideoStream decoder" + depends on VIDEO_DEV && I2C + help + Support for BT866 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt866. + +config VIDEO_ISL7998X + tristate "Intersil ISL7998x video decoder" + depends on VIDEO_DEV && I2C + depends on OF_GPIO + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for Intersil ISL7998x analog to MIPI-CSI2 or + BT.656 decoder. + +config VIDEO_KS0127 + tristate "KS0127 video decoder" + depends on VIDEO_DEV && I2C + help + Support for KS0127 video decoder. + + This chip is used on AverMedia AVS6EYES Zoran-based MJPEG + cards. + + To compile this driver as a module, choose M here: the + module will be called ks0127. + +config VIDEO_MAX9286 + tristate "Maxim MAX9286 GMSL deserializer support" + depends on I2C && I2C_MUX + depends on VIDEO_DEV + depends on OF_GPIO + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + help + This driver supports the Maxim MAX9286 GMSL deserializer. + + To compile this driver as a module, choose M here: the + module will be called max9286. + +config VIDEO_ML86V7667 + tristate "OKI ML86V7667 video decoder" + depends on VIDEO_DEV && I2C + help + Support for the OKI Semiconductor ML86V7667 video decoder. + + To compile this driver as a module, choose M here: the + module will be called ml86v7667. + +config VIDEO_SAA7110 + tristate "Philips SAA7110 video decoder" + depends on VIDEO_DEV && I2C + help + Support for the Philips SAA7110 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7110. + +config VIDEO_SAA711X + tristate "Philips SAA7111/3/4/5 video decoders" + depends on VIDEO_DEV && I2C + help + Support for the Philips SAA7111/3/4/5 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7115. + +config VIDEO_TC358743 + tristate "Toshiba TC358743 decoder" + depends on VIDEO_DEV && I2C + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select HDMI + select V4L2_FWNODE + help + Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. + + To compile this driver as a module, choose M here: the + module will be called tc358743. + +config VIDEO_TC358743_CEC + bool "Enable Toshiba TC358743 CEC support" + depends on VIDEO_TC358743 + select CEC_CORE + help + When selected the tc358743 will support the optional + HDMI CEC feature. + +config VIDEO_TC358746 + tristate "Toshiba TC358746 parallel-CSI2 bridge" + depends on VIDEO_DEV && PM && I2C + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + select V4L2_FWNODE + select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY + select REGMAP_I2C + help + Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge. + The bridge can work in both directions but currently only the + parallel-in / csi-out path is supported. + + To compile this driver as a module, choose M here: the + module will be called tc358746. + +config VIDEO_TVP514X + tristate "Texas Instruments TVP514x video decoder" + depends on VIDEO_DEV && I2C + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the TI TVP5146/47 + decoder. It is currently working with the TI OMAP3 camera + controller. + + To compile this driver as a module, choose M here: the + module will be called tvp514x. + +config VIDEO_TVP5150 + tristate "Texas Instruments TVP5150 video decoder" + depends on VIDEO_DEV && I2C + select V4L2_FWNODE + select REGMAP_I2C + help + Support for the Texas Instruments TVP5150 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp5150. + +config VIDEO_TVP7002 + tristate "Texas Instruments TVP7002 video decoder" + depends on VIDEO_DEV && I2C + select V4L2_FWNODE + help + Support for the Texas Instruments TVP7002 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp7002. + +config VIDEO_TW2804 + tristate "Techwell TW2804 multiple video decoder" + depends on VIDEO_DEV && I2C + help + Support for the Techwell tw2804 multiple video decoder. + + To compile this driver as a module, choose M here: the + module will be called tw2804. + +config VIDEO_TW9903 + tristate "Techwell TW9903 video decoder" + depends on VIDEO_DEV && I2C + help + Support for the Techwell tw9903 multi-standard video decoder + with high quality down scaler. + + To compile this driver as a module, choose M here: the + module will be called tw9903. + +config VIDEO_TW9906 + tristate "Techwell TW9906 video decoder" + depends on VIDEO_DEV && I2C + help + Support for the Techwell tw9906 enhanced multi-standard comb filter + video decoder with YCbCr input support. + + To compile this driver as a module, choose M here: the + module will be called tw9906. + +config VIDEO_TW9910 + tristate "Techwell TW9910 video decoder" + depends on VIDEO_DEV && I2C + select V4L2_ASYNC + help + Support for Techwell TW9910 NTSC/PAL/SECAM video decoder. + + To compile this driver as a module, choose M here: the + module will be called tw9910. + +config VIDEO_VPX3220 + tristate "vpx3220a, vpx3216b & vpx3214c video decoders" + depends on VIDEO_DEV && I2C + help + Support for VPX322x video decoders. + + To compile this driver as a module, choose M here: the + module will be called vpx3220. + +comment "Video and audio decoders" + +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_DEV && I2C + help + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + +source "drivers/media/i2c/cx25840/Kconfig" + +endmenu + +menu "Video encoders" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_ADV7170 + tristate "Analog Devices ADV7170 video encoder" + depends on VIDEO_DEV && I2C + help + Support for the Analog Devices ADV7170 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7170. + +config VIDEO_ADV7175 + tristate "Analog Devices ADV7175 video encoder" + depends on VIDEO_DEV && I2C + help + Support for the Analog Devices ADV7175 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7175. + +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + select V4L2_ASYNC + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + +config VIDEO_ADV7393 + tristate "ADV7393 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7393 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7393. + +config VIDEO_ADV7511 + tristate "Analog Devices ADV7511 encoder" + depends on VIDEO_DEV && I2C + depends on DRM_I2C_ADV7511=n || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select HDMI + help + Support for the Analog Devices ADV7511 video encoder. + + This is a Analog Devices HDMI transmitter. + + To compile this driver as a module, choose M here: the + module will be called adv7511. + +config VIDEO_ADV7511_CEC + bool "Enable Analog Devices ADV7511 CEC support" + depends on VIDEO_ADV7511 + select CEC_CORE + help + When selected the adv7511 will support the optional + HDMI CEC feature. + +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C + help + Video output driver for AKM AK8813 and AK8814 TV encoders + +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_DEV && I2C + help + Support for the Philips SAA7127/9 digital video encoders. + + To compile this driver as a module, choose M here: the + module will be called saa7127. + +config VIDEO_SAA7185 + tristate "Philips SAA7185 video encoder" + depends on VIDEO_DEV && I2C + help + Support for the Philips SAA7185 video encoder. + + To compile this driver as a module, choose M here: the + module will be called saa7185. + +config VIDEO_THS8200 + tristate "Texas Instruments THS8200 video encoder" + depends on VIDEO_DEV && I2C + select V4L2_ASYNC + help + Support for the Texas Instruments THS8200 video encoder. + + To compile this driver as a module, choose M here: the + module will be called ths8200. + +endmenu + +menu "Video improvement chips" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_DEV && I2C + select V4L2_ASYNC + help + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_DEV && I2C + help + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. + +endmenu + +menu "Audio/Video compression chips" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_SAA6752HS + tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" + depends on VIDEO_DEV && I2C + select CRC32 + help + Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 + audio encoder with multiplexer. + + To compile this driver as a module, choose M here: the + module will be called saa6752hs. + +endmenu + +menu "SDR tuner chips" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config SDR_MAX2175 + tristate "Maxim 2175 RF to Bits tuner" + depends on VIDEO_DEV && MEDIA_SDR_SUPPORT && I2C + select REGMAP_I2C + select V4L2_ASYNC + help + Support for Maxim 2175 tuner. It is an advanced analog/digital + radio receiver with RF-to-Bits front-end designed for SDR solutions. + + To compile this driver as a module, choose M here; the + module will be called max2175. + +endmenu + +menu "Miscellaneous helper chips" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +config VIDEO_I2C + tristate "I2C transport video support" + depends on VIDEO_DEV && I2C + select VIDEOBUF2_VMALLOC + imply HWMON + help + Enable the I2C transport video support which supports the + following: + * Panasonic AMG88xx Grid-Eye Sensors + * Melexis MLX90640 Thermal Cameras + + To compile this driver as a module, choose M here: the + module will be called video-i2c + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_DEV && I2C + help + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. + +config VIDEO_ST_MIPID02 + tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge. + It is used to allow usage of CSI-2 sensor with PARALLEL port + controller. + + To compile this driver as a module, choose M here: the + module will be called st-mipid02. + +config VIDEO_THS7303 + tristate "THS7303/53 Video Amplifier" + depends on VIDEO_DEV && I2C + select V4L2_ASYNC + help + Support for TI THS7303/53 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +endmenu + +# +# Video serializers and deserializers (e.g. FPD-Link) +# + +menu "Video serializers and deserializers" + +config VIDEO_DS90UB913 + tristate "TI DS90UB913 FPD-Link III Serializer" + depends on OF && I2C && VIDEO_DEV && COMMON_CLK + select I2C_ATR + select MEDIA_CONTROLLER + select GPIOLIB + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Device driver for the Texas Instruments DS90UB913 + FPD-Link III Serializer. + +config VIDEO_DS90UB953 + tristate "TI FPD-Link III/IV CSI-2 Serializers" + depends on OF && I2C && VIDEO_DEV && COMMON_CLK + select I2C_ATR + select MEDIA_CONTROLLER + select GPIOLIB + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Device driver for the Texas Instruments DS90UB953 + FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer. + +config VIDEO_DS90UB960 + tristate "TI FPD-Link III/IV Deserializers" + depends on OF && I2C && VIDEO_DEV && COMMON_CLK + select I2C_ATR + select MEDIA_CONTROLLER + select GPIOLIB + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Device driver for the Texas Instruments DS90UB960 + FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer. + +endmenu + +endif # VIDEO_DEV -- cgit v1.2.3