From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/media/i2c/ov5693.c | 1434 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1434 insertions(+) create mode 100644 drivers/media/i2c/ov5693.c (limited to 'drivers/media/i2c/ov5693.c') diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c new file mode 100644 index 0000000000..488ee6d9d3 --- /dev/null +++ b/drivers/media/i2c/ov5693.c @@ -0,0 +1,1434 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013 Intel Corporation. All Rights Reserved. + * + * Adapted from the atomisp-ov5693 driver, with contributions from: + * + * Daniel Scally + * Jean-Michel Hautbois + * Fabian Wuthrich + * Tsuchiya Yuto + * Jordan Hand + * Jake Day + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* System Control */ +#define OV5693_SW_RESET_REG CCI_REG8(0x0103) +#define OV5693_SW_STREAM_REG CCI_REG8(0x0100) +#define OV5693_START_STREAMING 0x01 +#define OV5693_STOP_STREAMING 0x00 +#define OV5693_SW_RESET 0x01 + +#define OV5693_REG_CHIP_ID CCI_REG16(0x300a) +/* Yes, this is right. The datasheet for the OV5693 gives its ID as 0x5690 */ +#define OV5693_CHIP_ID 0x5690 + +/* Exposure */ +#define OV5693_EXPOSURE_CTRL_REG CCI_REG24(0x3500) +#define OV5693_EXPOSURE_CTRL_MASK GENMASK(19, 4) +#define OV5693_INTEGRATION_TIME_MARGIN 8 +#define OV5693_EXPOSURE_MIN 1 +#define OV5693_EXPOSURE_STEP 1 + +/* Analogue Gain */ +#define OV5693_GAIN_CTRL_REG CCI_REG16(0x350a) +#define OV5693_GAIN_CTRL_MASK GENMASK(10, 4) +#define OV5693_GAIN_MIN 1 +#define OV5693_GAIN_MAX 127 +#define OV5693_GAIN_DEF 8 +#define OV5693_GAIN_STEP 1 + +/* Digital Gain */ +#define OV5693_MWB_RED_GAIN_REG CCI_REG16(0x3400) +#define OV5693_MWB_GREEN_GAIN_REG CCI_REG16(0x3402) +#define OV5693_MWB_BLUE_GAIN_REG CCI_REG16(0x3404) +#define OV5693_MWB_GAIN_MASK GENMASK(11, 0) +#define OV5693_MWB_GAIN_MAX 0x0fff +#define OV5693_DIGITAL_GAIN_MIN 1 +#define OV5693_DIGITAL_GAIN_MAX 4095 +#define OV5693_DIGITAL_GAIN_DEF 1024 +#define OV5693_DIGITAL_GAIN_STEP 1 + +/* Timing and Format */ +#define OV5693_CROP_START_X_REG CCI_REG16(0x3800) +#define OV5693_CROP_START_Y_REG CCI_REG16(0x3802) +#define OV5693_CROP_END_X_REG CCI_REG16(0x3804) +#define OV5693_CROP_END_Y_REG CCI_REG16(0x3806) +#define OV5693_OUTPUT_SIZE_X_REG CCI_REG16(0x3808) +#define OV5693_OUTPUT_SIZE_Y_REG CCI_REG16(0x380a) + +#define OV5693_TIMING_HTS_REG CCI_REG16(0x380c) +#define OV5693_FIXED_PPL 2688U +#define OV5693_TIMING_VTS_REG CCI_REG16(0x380e) +#define OV5693_TIMING_MAX_VTS 0xffff +#define OV5693_TIMING_MIN_VTS 0x04 + +#define OV5693_OFFSET_START_X_REG CCI_REG16(0x3810) +#define OV5693_OFFSET_START_Y_REG CCI_REG16(0x3812) + +#define OV5693_SUB_INC_X_REG CCI_REG8(0x3814) +#define OV5693_SUB_INC_Y_REG CCI_REG8(0x3815) + +#define OV5693_FORMAT1_REG CCI_REG8(0x3820) +#define OV5693_FORMAT1_FLIP_VERT_ISP_EN BIT(6) +#define OV5693_FORMAT1_FLIP_VERT_SENSOR_EN BIT(1) +#define OV5693_FORMAT1_VBIN_EN BIT(0) +#define OV5693_FORMAT2_REG CCI_REG8(0x3821) +#define OV5693_FORMAT2_HDR_EN BIT(7) +#define OV5693_FORMAT2_FLIP_HORZ_ISP_EN BIT(2) +#define OV5693_FORMAT2_FLIP_HORZ_SENSOR_EN BIT(1) +#define OV5693_FORMAT2_HBIN_EN BIT(0) + +#define OV5693_ISP_CTRL2_REG CCI_REG8(0x5002) +#define OV5693_ISP_SCALE_ENABLE BIT(7) + +/* Pixel Array */ +#define OV5693_NATIVE_WIDTH 2624 +#define OV5693_NATIVE_HEIGHT 1956 +#define OV5693_NATIVE_START_LEFT 0 +#define OV5693_NATIVE_START_TOP 0 +#define OV5693_ACTIVE_WIDTH 2592 +#define OV5693_ACTIVE_HEIGHT 1944 +#define OV5693_ACTIVE_START_LEFT 16 +#define OV5693_ACTIVE_START_TOP 6 +#define OV5693_MIN_CROP_WIDTH 2 +#define OV5693_MIN_CROP_HEIGHT 2 + +/* Test Pattern */ +#define OV5693_TEST_PATTERN_REG CCI_REG8(0x5e00) +#define OV5693_TEST_PATTERN_ENABLE BIT(7) +#define OV5693_TEST_PATTERN_ROLLING BIT(6) +#define OV5693_TEST_PATTERN_RANDOM 0x01 +#define OV5693_TEST_PATTERN_BARS 0x00 + +/* System Frequencies */ +#define OV5693_XVCLK_FREQ 19200000 +#define OV5693_LINK_FREQ_419_2MHZ 419200000 +#define OV5693_PIXEL_RATE 167680000 + +#define to_ov5693_sensor(x) container_of(x, struct ov5693_device, sd) + +static const char * const ov5693_supply_names[] = { + "avdd", /* Analog power */ + "dovdd", /* Digital I/O power */ + "dvdd", /* Digital circuit power */ +}; + +#define OV5693_NUM_SUPPLIES ARRAY_SIZE(ov5693_supply_names) + +struct ov5693_device { + struct device *dev; + struct regmap *regmap; + + /* Protect against concurrent changes to controls */ + struct mutex lock; + + struct gpio_desc *reset; + struct gpio_desc *powerdown; + struct gpio_desc *privacy_led; + struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES]; + struct clk *xvclk; + + struct ov5693_mode { + struct v4l2_rect crop; + struct v4l2_mbus_framefmt format; + bool binning_x; + bool binning_y; + unsigned int inc_x_odd; + unsigned int inc_y_odd; + unsigned int vts; + } mode; + bool streaming; + + struct v4l2_subdev sd; + struct media_pad pad; + + struct ov5693_v4l2_ctrls { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *link_freq; + struct v4l2_ctrl *pixel_rate; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *analogue_gain; + struct v4l2_ctrl *digital_gain; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vblank; + struct v4l2_ctrl *test_pattern; + } ctrls; +}; + +static const struct cci_reg_sequence ov5693_global_regs[] = { + {CCI_REG8(0x3016), 0xf0}, + {CCI_REG8(0x3017), 0xf0}, + {CCI_REG8(0x3018), 0xf0}, + {CCI_REG8(0x3022), 0x01}, + {CCI_REG8(0x3028), 0x44}, + {CCI_REG8(0x3098), 0x02}, + {CCI_REG8(0x3099), 0x19}, + {CCI_REG8(0x309a), 0x02}, + {CCI_REG8(0x309b), 0x01}, + {CCI_REG8(0x309c), 0x00}, + {CCI_REG8(0x30a0), 0xd2}, + {CCI_REG8(0x30a2), 0x01}, + {CCI_REG8(0x30b2), 0x00}, + {CCI_REG8(0x30b3), 0x83}, + {CCI_REG8(0x30b4), 0x03}, + {CCI_REG8(0x30b5), 0x04}, + {CCI_REG8(0x30b6), 0x01}, + {CCI_REG8(0x3080), 0x01}, + {CCI_REG8(0x3104), 0x21}, + {CCI_REG8(0x3106), 0x00}, + {CCI_REG8(0x3406), 0x01}, + {CCI_REG8(0x3503), 0x07}, + {CCI_REG8(0x350b), 0x40}, + {CCI_REG8(0x3601), 0x0a}, + {CCI_REG8(0x3602), 0x38}, + {CCI_REG8(0x3612), 0x80}, + {CCI_REG8(0x3620), 0x54}, + {CCI_REG8(0x3621), 0xc7}, + {CCI_REG8(0x3622), 0x0f}, + {CCI_REG8(0x3625), 0x10}, + {CCI_REG8(0x3630), 0x55}, + {CCI_REG8(0x3631), 0xf4}, + {CCI_REG8(0x3632), 0x00}, + {CCI_REG8(0x3633), 0x34}, + {CCI_REG8(0x3634), 0x02}, + {CCI_REG8(0x364d), 0x0d}, + {CCI_REG8(0x364f), 0xdd}, + {CCI_REG8(0x3660), 0x04}, + {CCI_REG8(0x3662), 0x10}, + {CCI_REG8(0x3663), 0xf1}, + {CCI_REG8(0x3665), 0x00}, + {CCI_REG8(0x3666), 0x20}, + {CCI_REG8(0x3667), 0x00}, + {CCI_REG8(0x366a), 0x80}, + {CCI_REG8(0x3680), 0xe0}, + {CCI_REG8(0x3681), 0x00}, + {CCI_REG8(0x3700), 0x42}, + {CCI_REG8(0x3701), 0x14}, + {CCI_REG8(0x3702), 0xa0}, + {CCI_REG8(0x3703), 0xd8}, + {CCI_REG8(0x3704), 0x78}, + {CCI_REG8(0x3705), 0x02}, + {CCI_REG8(0x370a), 0x00}, + {CCI_REG8(0x370b), 0x20}, + {CCI_REG8(0x370c), 0x0c}, + {CCI_REG8(0x370d), 0x11}, + {CCI_REG8(0x370e), 0x00}, + {CCI_REG8(0x370f), 0x40}, + {CCI_REG8(0x3710), 0x00}, + {CCI_REG8(0x371a), 0x1c}, + {CCI_REG8(0x371b), 0x05}, + {CCI_REG8(0x371c), 0x01}, + {CCI_REG8(0x371e), 0xa1}, + {CCI_REG8(0x371f), 0x0c}, + {CCI_REG8(0x3721), 0x00}, + {CCI_REG8(0x3724), 0x10}, + {CCI_REG8(0x3726), 0x00}, + {CCI_REG8(0x372a), 0x01}, + {CCI_REG8(0x3730), 0x10}, + {CCI_REG8(0x3738), 0x22}, + {CCI_REG8(0x3739), 0xe5}, + {CCI_REG8(0x373a), 0x50}, + {CCI_REG8(0x373b), 0x02}, + {CCI_REG8(0x373c), 0x41}, + {CCI_REG8(0x373f), 0x02}, + {CCI_REG8(0x3740), 0x42}, + {CCI_REG8(0x3741), 0x02}, + {CCI_REG8(0x3742), 0x18}, + {CCI_REG8(0x3743), 0x01}, + {CCI_REG8(0x3744), 0x02}, + {CCI_REG8(0x3747), 0x10}, + {CCI_REG8(0x374c), 0x04}, + {CCI_REG8(0x3751), 0xf0}, + {CCI_REG8(0x3752), 0x00}, + {CCI_REG8(0x3753), 0x00}, + {CCI_REG8(0x3754), 0xc0}, + {CCI_REG8(0x3755), 0x00}, + {CCI_REG8(0x3756), 0x1a}, + {CCI_REG8(0x3758), 0x00}, + {CCI_REG8(0x3759), 0x0f}, + {CCI_REG8(0x376b), 0x44}, + {CCI_REG8(0x375c), 0x04}, + {CCI_REG8(0x3774), 0x10}, + {CCI_REG8(0x3776), 0x00}, + {CCI_REG8(0x377f), 0x08}, + {CCI_REG8(0x3780), 0x22}, + {CCI_REG8(0x3781), 0x0c}, + {CCI_REG8(0x3784), 0x2c}, + {CCI_REG8(0x3785), 0x1e}, + {CCI_REG8(0x378f), 0xf5}, + {CCI_REG8(0x3791), 0xb0}, + {CCI_REG8(0x3795), 0x00}, + {CCI_REG8(0x3796), 0x64}, + {CCI_REG8(0x3797), 0x11}, + {CCI_REG8(0x3798), 0x30}, + {CCI_REG8(0x3799), 0x41}, + {CCI_REG8(0x379a), 0x07}, + {CCI_REG8(0x379b), 0xb0}, + {CCI_REG8(0x379c), 0x0c}, + {CCI_REG8(0x3a04), 0x06}, + {CCI_REG8(0x3a05), 0x14}, + {CCI_REG8(0x3e07), 0x20}, + {CCI_REG8(0x4000), 0x08}, + {CCI_REG8(0x4001), 0x04}, + {CCI_REG8(0x4004), 0x08}, + {CCI_REG8(0x4006), 0x20}, + {CCI_REG8(0x4008), 0x24}, + {CCI_REG8(0x4009), 0x10}, + {CCI_REG8(0x4058), 0x00}, + {CCI_REG8(0x4101), 0xb2}, + {CCI_REG8(0x4307), 0x31}, + {CCI_REG8(0x4511), 0x05}, + {CCI_REG8(0x4512), 0x01}, + {CCI_REG8(0x481f), 0x30}, + {CCI_REG8(0x4826), 0x2c}, + {CCI_REG8(0x4d02), 0xfd}, + {CCI_REG8(0x4d03), 0xf5}, + {CCI_REG8(0x4d04), 0x0c}, + {CCI_REG8(0x4d05), 0xcc}, + {CCI_REG8(0x4837), 0x0a}, + {CCI_REG8(0x5003), 0x20}, + {CCI_REG8(0x5013), 0x00}, + {CCI_REG8(0x5842), 0x01}, + {CCI_REG8(0x5843), 0x2b}, + {CCI_REG8(0x5844), 0x01}, + {CCI_REG8(0x5845), 0x92}, + {CCI_REG8(0x5846), 0x01}, + {CCI_REG8(0x5847), 0x8f}, + {CCI_REG8(0x5848), 0x01}, + {CCI_REG8(0x5849), 0x0c}, + {CCI_REG8(0x5e10), 0x0c}, + {CCI_REG8(0x3820), 0x00}, + {CCI_REG8(0x3821), 0x1e}, + {CCI_REG8(0x5041), 0x14} +}; + +static const struct v4l2_rect ov5693_default_crop = { + .left = OV5693_ACTIVE_START_LEFT, + .top = OV5693_ACTIVE_START_TOP, + .width = OV5693_ACTIVE_WIDTH, + .height = OV5693_ACTIVE_HEIGHT, +}; + +static const struct v4l2_mbus_framefmt ov5693_default_fmt = { + .width = OV5693_ACTIVE_WIDTH, + .height = OV5693_ACTIVE_HEIGHT, + .code = MEDIA_BUS_FMT_SBGGR10_1X10, +}; + +static const s64 link_freq_menu_items[] = { + OV5693_LINK_FREQ_419_2MHZ +}; + +static const char * const ov5693_test_pattern_menu[] = { + "Disabled", + "Random Data", + "Colour Bars", + "Colour Bars with Rolling Bar" +}; + +static const u8 ov5693_test_pattern_bits[] = { + 0, + OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_RANDOM, + OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_BARS, + OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_BARS | + OV5693_TEST_PATTERN_ROLLING, +}; + +/* V4L2 Controls Functions */ + +static int ov5693_flip_vert_configure(struct ov5693_device *ov5693, + bool enable) +{ + u8 bits = OV5693_FORMAT1_FLIP_VERT_ISP_EN | + OV5693_FORMAT1_FLIP_VERT_SENSOR_EN; + int ret; + + ret = cci_update_bits(ov5693->regmap, OV5693_FORMAT1_REG, bits, + enable ? bits : 0, NULL); + if (ret) + return ret; + + return 0; +} + +static int ov5693_flip_horz_configure(struct ov5693_device *ov5693, + bool enable) +{ + u8 bits = OV5693_FORMAT2_FLIP_HORZ_ISP_EN | + OV5693_FORMAT2_FLIP_HORZ_SENSOR_EN; + int ret; + + ret = cci_update_bits(ov5693->regmap, OV5693_FORMAT2_REG, bits, + enable ? bits : 0, NULL); + if (ret) + return ret; + + return 0; +} + +static int ov5693_get_exposure(struct ov5693_device *ov5693, s32 *value) +{ + u64 exposure; + int ret; + + ret = cci_read(ov5693->regmap, OV5693_EXPOSURE_CTRL_REG, &exposure, + NULL); + if (ret) + return ret; + + /* The lowest 4 bits are unsupported fractional bits */ + *value = exposure >> 4; + + return 0; +} + +static int ov5693_exposure_configure(struct ov5693_device *ov5693, + u32 exposure) +{ + int ret = 0; + + exposure = (exposure << 4) & OV5693_EXPOSURE_CTRL_MASK; + + cci_write(ov5693->regmap, OV5693_EXPOSURE_CTRL_REG, exposure, &ret); + + return ret; +} + +static int ov5693_get_gain(struct ov5693_device *ov5693, u32 *gain) +{ + u64 value; + int ret; + + ret = cci_read(ov5693->regmap, OV5693_GAIN_CTRL_REG, &value, NULL); + if (ret) + return ret; + + /* As with exposure, the lowest 4 bits are fractional bits. */ + *gain = value >> 4; + + return ret; +} + +static int ov5693_digital_gain_configure(struct ov5693_device *ov5693, + u32 gain) +{ + int ret = 0; + + gain &= OV5693_MWB_GAIN_MASK; + + cci_write(ov5693->regmap, OV5693_MWB_RED_GAIN_REG, gain, &ret); + cci_write(ov5693->regmap, OV5693_MWB_GREEN_GAIN_REG, gain, &ret); + cci_write(ov5693->regmap, OV5693_MWB_BLUE_GAIN_REG, gain, &ret); + + return ret; +} + +static int ov5693_analog_gain_configure(struct ov5693_device *ov5693, u32 gain) +{ + int ret = 0; + + gain = (gain << 4) & OV5693_GAIN_CTRL_MASK; + + cci_write(ov5693->regmap, OV5693_GAIN_CTRL_REG, gain, &ret); + + return ret; +} + +static int ov5693_vts_configure(struct ov5693_device *ov5693, u32 vblank) +{ + u16 vts = ov5693->mode.format.height + vblank; + int ret = 0; + + cci_write(ov5693->regmap, OV5693_TIMING_VTS_REG, vts, &ret); + + return ret; +} + +static int ov5693_test_pattern_configure(struct ov5693_device *ov5693, u32 idx) +{ + int ret = 0; + + cci_write(ov5693->regmap, OV5693_TEST_PATTERN_REG, + ov5693_test_pattern_bits[idx], &ret); + + return ret; +} + +static int ov5693_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov5693_device *ov5693 = + container_of(ctrl->handler, struct ov5693_device, ctrls.handler); + int ret = 0; + + /* If VBLANK is altered we need to update exposure to compensate */ + if (ctrl->id == V4L2_CID_VBLANK) { + int exposure_max; + + exposure_max = ov5693->mode.format.height + ctrl->val - + OV5693_INTEGRATION_TIME_MARGIN; + __v4l2_ctrl_modify_range(ov5693->ctrls.exposure, + ov5693->ctrls.exposure->minimum, + exposure_max, + ov5693->ctrls.exposure->step, + min(ov5693->ctrls.exposure->val, + exposure_max)); + } + + /* Only apply changes to the controls if the device is powered up */ + if (!pm_runtime_get_if_in_use(ov5693->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + ret = ov5693_exposure_configure(ov5693, ctrl->val); + break; + case V4L2_CID_ANALOGUE_GAIN: + ret = ov5693_analog_gain_configure(ov5693, ctrl->val); + break; + case V4L2_CID_DIGITAL_GAIN: + ret = ov5693_digital_gain_configure(ov5693, ctrl->val); + break; + case V4L2_CID_HFLIP: + ret = ov5693_flip_horz_configure(ov5693, !!ctrl->val); + break; + case V4L2_CID_VFLIP: + ret = ov5693_flip_vert_configure(ov5693, !!ctrl->val); + break; + case V4L2_CID_VBLANK: + ret = ov5693_vts_configure(ov5693, ctrl->val); + break; + case V4L2_CID_TEST_PATTERN: + ret = ov5693_test_pattern_configure(ov5693, ctrl->val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_put(ov5693->dev); + + return ret; +} + +static int ov5693_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov5693_device *ov5693 = container_of(ctrl->handler, + struct ov5693_device, + ctrls.handler); + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE_ABSOLUTE: + return ov5693_get_exposure(ov5693, &ctrl->val); + case V4L2_CID_AUTOGAIN: + return ov5693_get_gain(ov5693, &ctrl->val); + default: + return -EINVAL; + } +} + +static const struct v4l2_ctrl_ops ov5693_ctrl_ops = { + .s_ctrl = ov5693_s_ctrl, + .g_volatile_ctrl = ov5693_g_volatile_ctrl +}; + +/* System Control Functions */ + +static int ov5693_mode_configure(struct ov5693_device *ov5693) +{ + const struct ov5693_mode *mode = &ov5693->mode; + int ret = 0; + + /* Crop Start X */ + cci_write(ov5693->regmap, OV5693_CROP_START_X_REG, mode->crop.left, + &ret); + + /* Offset X */ + cci_write(ov5693->regmap, OV5693_OFFSET_START_X_REG, 0, &ret); + + /* Output Size X */ + cci_write(ov5693->regmap, OV5693_OUTPUT_SIZE_X_REG, mode->format.width, + &ret); + + /* Crop End X */ + cci_write(ov5693->regmap, OV5693_CROP_END_X_REG, + mode->crop.left + mode->crop.width, &ret); + + /* Horizontal Total Size */ + cci_write(ov5693->regmap, OV5693_TIMING_HTS_REG, OV5693_FIXED_PPL, + &ret); + + /* Crop Start Y */ + cci_write(ov5693->regmap, OV5693_CROP_START_Y_REG, mode->crop.top, + &ret); + + /* Offset Y */ + cci_write(ov5693->regmap, OV5693_OFFSET_START_Y_REG, 0, &ret); + + /* Output Size Y */ + cci_write(ov5693->regmap, OV5693_OUTPUT_SIZE_Y_REG, mode->format.height, + &ret); + + /* Crop End Y */ + cci_write(ov5693->regmap, OV5693_CROP_END_Y_REG, + mode->crop.top + mode->crop.height, &ret); + + /* Subsample X increase */ + cci_write(ov5693->regmap, OV5693_SUB_INC_X_REG, + ((mode->inc_x_odd << 4) & 0xf0) | 0x01, &ret); + /* Subsample Y increase */ + cci_write(ov5693->regmap, OV5693_SUB_INC_Y_REG, + ((mode->inc_y_odd << 4) & 0xf0) | 0x01, &ret); + + /* Binning */ + cci_update_bits(ov5693->regmap, OV5693_FORMAT1_REG, + OV5693_FORMAT1_VBIN_EN, + mode->binning_y ? OV5693_FORMAT1_VBIN_EN : 0, &ret); + + cci_update_bits(ov5693->regmap, OV5693_FORMAT2_REG, + OV5693_FORMAT2_HBIN_EN, + mode->binning_x ? OV5693_FORMAT2_HBIN_EN : 0, &ret); + + return ret; +} + +static int ov5693_enable_streaming(struct ov5693_device *ov5693, bool enable) +{ + int ret = 0; + + cci_write(ov5693->regmap, OV5693_SW_STREAM_REG, + enable ? OV5693_START_STREAMING : OV5693_STOP_STREAMING, + &ret); + + return ret; +} + +static int ov5693_sw_reset(struct ov5693_device *ov5693) +{ + int ret = 0; + + cci_write(ov5693->regmap, OV5693_SW_RESET_REG, OV5693_SW_RESET, &ret); + + return ret; +} + +static int ov5693_sensor_init(struct ov5693_device *ov5693) +{ + int ret; + + ret = ov5693_sw_reset(ov5693); + if (ret) + return dev_err_probe(ov5693->dev, ret, + "software reset error\n"); + + ret = cci_multi_reg_write(ov5693->regmap, ov5693_global_regs, + ARRAY_SIZE(ov5693_global_regs), NULL); + if (ret) + return dev_err_probe(ov5693->dev, ret, + "global settings error\n"); + + ret = ov5693_mode_configure(ov5693); + if (ret) + return dev_err_probe(ov5693->dev, ret, + "mode configure error\n"); + + ret = ov5693_enable_streaming(ov5693, false); + if (ret) + dev_err(ov5693->dev, "stop streaming error\n"); + + return ret; +} + +static void ov5693_sensor_powerdown(struct ov5693_device *ov5693) +{ + gpiod_set_value_cansleep(ov5693->privacy_led, 0); + gpiod_set_value_cansleep(ov5693->reset, 1); + gpiod_set_value_cansleep(ov5693->powerdown, 1); + + regulator_bulk_disable(OV5693_NUM_SUPPLIES, ov5693->supplies); + + clk_disable_unprepare(ov5693->xvclk); +} + +static int ov5693_sensor_powerup(struct ov5693_device *ov5693) +{ + int ret; + + gpiod_set_value_cansleep(ov5693->reset, 1); + gpiod_set_value_cansleep(ov5693->powerdown, 1); + + ret = clk_prepare_enable(ov5693->xvclk); + if (ret) { + dev_err(ov5693->dev, "Failed to enable clk\n"); + goto fail_power; + } + + ret = regulator_bulk_enable(OV5693_NUM_SUPPLIES, ov5693->supplies); + if (ret) { + dev_err(ov5693->dev, "Failed to enable regulators\n"); + goto fail_power; + } + + gpiod_set_value_cansleep(ov5693->powerdown, 0); + gpiod_set_value_cansleep(ov5693->reset, 0); + gpiod_set_value_cansleep(ov5693->privacy_led, 1); + + usleep_range(5000, 7500); + + return 0; + +fail_power: + ov5693_sensor_powerdown(ov5693); + return ret; +} + +static int __maybe_unused ov5693_sensor_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + + ov5693_sensor_powerdown(ov5693); + + return 0; +} + +static int __maybe_unused ov5693_sensor_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + int ret; + + mutex_lock(&ov5693->lock); + + ret = ov5693_sensor_powerup(ov5693); + if (ret) + goto out_unlock; + + ret = ov5693_sensor_init(ov5693); + if (ret) { + dev_err(dev, "ov5693 sensor init failure\n"); + goto err_power; + } + + goto out_unlock; + +err_power: + ov5693_sensor_powerdown(ov5693); +out_unlock: + mutex_unlock(&ov5693->lock); + return ret; +} + +static int ov5693_detect(struct ov5693_device *ov5693) +{ + int ret; + u64 id; + + ret = cci_read(ov5693->regmap, OV5693_REG_CHIP_ID, &id, NULL); + if (ret) + return ret; + + if (id != OV5693_CHIP_ID) + return dev_err_probe(ov5693->dev, -ENODEV, + "sensor ID mismatch. Got 0x%04llx\n", id); + + return 0; +} + +/* V4L2 Framework callbacks */ + +static unsigned int __ov5693_calc_vts(u32 height) +{ + /* + * We need to set a sensible default VTS for whatever format height we + * happen to be given from set_fmt(). This function just targets + * an even multiple of 30fps. + */ + + unsigned int tgt_fps; + + tgt_fps = rounddown(OV5693_PIXEL_RATE / OV5693_FIXED_PPL / height, 30); + + return ALIGN_DOWN(OV5693_PIXEL_RATE / OV5693_FIXED_PPL / tgt_fps, 2); +} + +static struct v4l2_mbus_framefmt * +__ov5693_get_pad_format(struct ov5693_device *ov5693, + struct v4l2_subdev_state *state, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(&ov5693->sd, state, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &ov5693->mode.format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__ov5693_get_pad_crop(struct ov5693_device *ov5693, + struct v4l2_subdev_state *state, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(&ov5693->sd, state, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &ov5693->mode.crop; + } + + return NULL; +} + +static int ov5693_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + + format->format = ov5693->mode.format; + + return 0; +} + +static int ov5693_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + const struct v4l2_rect *crop; + struct v4l2_mbus_framefmt *fmt; + unsigned int hratio, vratio; + unsigned int width, height; + unsigned int hblank; + int exposure_max; + + crop = __ov5693_get_pad_crop(ov5693, state, format->pad, format->which); + + /* + * Align to two to simplify the binning calculations below, and clamp + * the requested format at the crop rectangle + */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + OV5693_MIN_CROP_WIDTH, crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + OV5693_MIN_CROP_HEIGHT, crop->height); + + /* + * We can only support setting either the dimensions of the crop rect + * or those dimensions binned (separately) by a factor of two. + */ + hratio = clamp_t(unsigned int, + DIV_ROUND_CLOSEST(crop->width, width), 1, 2); + vratio = clamp_t(unsigned int, + DIV_ROUND_CLOSEST(crop->height, height), 1, 2); + + fmt = __ov5693_get_pad_format(ov5693, state, format->pad, + format->which); + + fmt->width = crop->width / hratio; + fmt->height = crop->height / vratio; + fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; + + format->format = *fmt; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + + mutex_lock(&ov5693->lock); + + ov5693->mode.binning_x = hratio > 1; + ov5693->mode.inc_x_odd = hratio > 1 ? 3 : 1; + ov5693->mode.binning_y = vratio > 1; + ov5693->mode.inc_y_odd = vratio > 1 ? 3 : 1; + + ov5693->mode.vts = __ov5693_calc_vts(fmt->height); + + __v4l2_ctrl_modify_range(ov5693->ctrls.vblank, + OV5693_TIMING_MIN_VTS, + OV5693_TIMING_MAX_VTS - fmt->height, + 1, ov5693->mode.vts - fmt->height); + __v4l2_ctrl_s_ctrl(ov5693->ctrls.vblank, + ov5693->mode.vts - fmt->height); + + hblank = OV5693_FIXED_PPL - fmt->width; + __v4l2_ctrl_modify_range(ov5693->ctrls.hblank, hblank, hblank, 1, + hblank); + + exposure_max = ov5693->mode.vts - OV5693_INTEGRATION_TIME_MARGIN; + __v4l2_ctrl_modify_range(ov5693->ctrls.exposure, + ov5693->ctrls.exposure->minimum, exposure_max, + ov5693->ctrls.exposure->step, + min(ov5693->ctrls.exposure->val, + exposure_max)); + + mutex_unlock(&ov5693->lock); + return 0; +} + +static int ov5693_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_selection *sel) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + mutex_lock(&ov5693->lock); + sel->r = *__ov5693_get_pad_crop(ov5693, state, sel->pad, + sel->which); + mutex_unlock(&ov5693->lock); + break; + case V4L2_SEL_TGT_NATIVE_SIZE: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = OV5693_NATIVE_WIDTH; + sel->r.height = OV5693_NATIVE_HEIGHT; + break; + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + sel->r.top = OV5693_ACTIVE_START_TOP; + sel->r.left = OV5693_ACTIVE_START_LEFT; + sel->r.width = OV5693_ACTIVE_WIDTH; + sel->r.height = OV5693_ACTIVE_HEIGHT; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ov5693_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_selection *sel) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + if (sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + /* + * Clamp the boundaries of the crop rectangle to the size of the sensor + * pixel array. Align to multiples of 2 to ensure Bayer pattern isn't + * disrupted. + */ + rect.left = clamp(ALIGN(sel->r.left, 2), OV5693_NATIVE_START_LEFT, + OV5693_NATIVE_WIDTH); + rect.top = clamp(ALIGN(sel->r.top, 2), OV5693_NATIVE_START_TOP, + OV5693_NATIVE_HEIGHT); + rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2), + OV5693_MIN_CROP_WIDTH, OV5693_NATIVE_WIDTH); + rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2), + OV5693_MIN_CROP_HEIGHT, OV5693_NATIVE_HEIGHT); + + /* Make sure the crop rectangle isn't outside the bounds of the array */ + rect.width = min_t(unsigned int, rect.width, + OV5693_NATIVE_WIDTH - rect.left); + rect.height = min_t(unsigned int, rect.height, + OV5693_NATIVE_HEIGHT - rect.top); + + __crop = __ov5693_get_pad_crop(ov5693, state, sel->pad, sel->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* + * Reset the output image size if the crop rectangle size has + * been modified. + */ + format = __ov5693_get_pad_format(ov5693, state, sel->pad, + sel->which); + format->width = rect.width; + format->height = rect.height; + } + + *__crop = rect; + sel->r = rect; + + return 0; +} + +static int ov5693_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + int ret; + + if (enable) { + ret = pm_runtime_get_sync(ov5693->dev); + if (ret < 0) + goto err_power_down; + + mutex_lock(&ov5693->lock); + ret = __v4l2_ctrl_handler_setup(&ov5693->ctrls.handler); + if (ret) { + mutex_unlock(&ov5693->lock); + goto err_power_down; + } + + ret = ov5693_enable_streaming(ov5693, true); + mutex_unlock(&ov5693->lock); + } else { + mutex_lock(&ov5693->lock); + ret = ov5693_enable_streaming(ov5693, false); + mutex_unlock(&ov5693->lock); + } + if (ret) + goto err_power_down; + + ov5693->streaming = !!enable; + + if (!enable) + pm_runtime_put(ov5693->dev); + + return 0; +err_power_down: + pm_runtime_put_noidle(ov5693->dev); + return ret; +} + +static int ov5693_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + unsigned int framesize = OV5693_FIXED_PPL * (ov5693->mode.format.height + + ov5693->ctrls.vblank->val); + unsigned int fps = DIV_ROUND_CLOSEST(OV5693_PIXEL_RATE, framesize); + + interval->interval.numerator = 1; + interval->interval.denominator = fps; + + return 0; +} + +static int ov5693_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + /* Only a single mbus format is supported */ + if (code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_SBGGR10_1X10; + return 0; +} + +static int ov5693_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + struct v4l2_rect *__crop; + + if (fse->index > 1 || fse->code != MEDIA_BUS_FMT_SBGGR10_1X10) + return -EINVAL; + + __crop = __ov5693_get_pad_crop(ov5693, state, fse->pad, fse->which); + if (!__crop) + return -EINVAL; + + fse->min_width = __crop->width / (fse->index + 1); + fse->min_height = __crop->height / (fse->index + 1); + fse->max_width = fse->min_width; + fse->max_height = fse->min_height; + + return 0; +} + +static const struct v4l2_subdev_video_ops ov5693_video_ops = { + .s_stream = ov5693_s_stream, + .g_frame_interval = ov5693_g_frame_interval, +}; + +static const struct v4l2_subdev_pad_ops ov5693_pad_ops = { + .enum_mbus_code = ov5693_enum_mbus_code, + .enum_frame_size = ov5693_enum_frame_size, + .get_fmt = ov5693_get_fmt, + .set_fmt = ov5693_set_fmt, + .get_selection = ov5693_get_selection, + .set_selection = ov5693_set_selection, +}; + +static const struct v4l2_subdev_ops ov5693_ops = { + .video = &ov5693_video_ops, + .pad = &ov5693_pad_ops, +}; + +/* Sensor and Driver Configuration Functions */ + +static int ov5693_init_controls(struct ov5693_device *ov5693) +{ + const struct v4l2_ctrl_ops *ops = &ov5693_ctrl_ops; + struct ov5693_v4l2_ctrls *ctrls = &ov5693->ctrls; + struct v4l2_fwnode_device_properties props; + int vblank_max, vblank_def; + int exposure_max; + int hblank; + int ret; + + ret = v4l2_ctrl_handler_init(&ctrls->handler, 12); + if (ret) + return ret; + + /* link freq */ + ctrls->link_freq = v4l2_ctrl_new_int_menu(&ctrls->handler, + NULL, V4L2_CID_LINK_FREQ, + 0, 0, link_freq_menu_items); + if (ctrls->link_freq) + ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + /* pixel rate */ + ctrls->pixel_rate = v4l2_ctrl_new_std(&ctrls->handler, NULL, + V4L2_CID_PIXEL_RATE, 0, + OV5693_PIXEL_RATE, 1, + OV5693_PIXEL_RATE); + + /* Exposure */ + exposure_max = ov5693->mode.vts - OV5693_INTEGRATION_TIME_MARGIN; + ctrls->exposure = v4l2_ctrl_new_std(&ctrls->handler, ops, + V4L2_CID_EXPOSURE, + OV5693_EXPOSURE_MIN, exposure_max, + OV5693_EXPOSURE_STEP, exposure_max); + + /* Gain */ + ctrls->analogue_gain = v4l2_ctrl_new_std(&ctrls->handler, + ops, V4L2_CID_ANALOGUE_GAIN, + OV5693_GAIN_MIN, + OV5693_GAIN_MAX, + OV5693_GAIN_STEP, + OV5693_GAIN_DEF); + + ctrls->digital_gain = v4l2_ctrl_new_std(&ctrls->handler, ops, + V4L2_CID_DIGITAL_GAIN, + OV5693_DIGITAL_GAIN_MIN, + OV5693_DIGITAL_GAIN_MAX, + OV5693_DIGITAL_GAIN_STEP, + OV5693_DIGITAL_GAIN_DEF); + + /* Flip */ + ctrls->hflip = v4l2_ctrl_new_std(&ctrls->handler, ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + + ctrls->vflip = v4l2_ctrl_new_std(&ctrls->handler, ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + hblank = OV5693_FIXED_PPL - ov5693->mode.format.width; + ctrls->hblank = v4l2_ctrl_new_std(&ctrls->handler, ops, + V4L2_CID_HBLANK, hblank, + hblank, 1, hblank); + + if (ctrls->hblank) + ctrls->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + vblank_max = OV5693_TIMING_MAX_VTS - ov5693->mode.format.height; + vblank_def = ov5693->mode.vts - ov5693->mode.format.height; + ctrls->vblank = v4l2_ctrl_new_std(&ctrls->handler, ops, + V4L2_CID_VBLANK, + OV5693_TIMING_MIN_VTS, + vblank_max, 1, vblank_def); + + ctrls->test_pattern = v4l2_ctrl_new_std_menu_items( + &ctrls->handler, ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(ov5693_test_pattern_menu) - 1, + 0, 0, ov5693_test_pattern_menu); + + if (ctrls->handler.error) { + dev_err(ov5693->dev, "Error initialising v4l2 ctrls\n"); + ret = ctrls->handler.error; + goto err_free_handler; + } + + /* set properties from fwnode (e.g. rotation, orientation) */ + ret = v4l2_fwnode_device_parse(ov5693->dev, &props); + if (ret) + goto err_free_handler; + + ret = v4l2_ctrl_new_fwnode_properties(&ctrls->handler, ops, + &props); + if (ret) + goto err_free_handler; + + /* Use same lock for controls as for everything else. */ + ctrls->handler.lock = &ov5693->lock; + ov5693->sd.ctrl_handler = &ctrls->handler; + + return 0; + +err_free_handler: + v4l2_ctrl_handler_free(&ctrls->handler); + return ret; +} + +static int ov5693_configure_gpios(struct ov5693_device *ov5693) +{ + ov5693->reset = devm_gpiod_get_optional(ov5693->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(ov5693->reset)) { + dev_err(ov5693->dev, "Error fetching reset GPIO\n"); + return PTR_ERR(ov5693->reset); + } + + ov5693->powerdown = devm_gpiod_get_optional(ov5693->dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(ov5693->powerdown)) { + dev_err(ov5693->dev, "Error fetching powerdown GPIO\n"); + return PTR_ERR(ov5693->powerdown); + } + + ov5693->privacy_led = devm_gpiod_get_optional(ov5693->dev, "privacy-led", + GPIOD_OUT_LOW); + if (IS_ERR(ov5693->privacy_led)) { + dev_err(ov5693->dev, "Error fetching privacy-led GPIO\n"); + return PTR_ERR(ov5693->privacy_led); + } + + return 0; +} + +static int ov5693_get_regulators(struct ov5693_device *ov5693) +{ + unsigned int i; + + for (i = 0; i < OV5693_NUM_SUPPLIES; i++) + ov5693->supplies[i].supply = ov5693_supply_names[i]; + + return devm_regulator_bulk_get(ov5693->dev, OV5693_NUM_SUPPLIES, + ov5693->supplies); +} + +static int ov5693_check_hwcfg(struct ov5693_device *ov5693) +{ + struct fwnode_handle *fwnode = dev_fwnode(ov5693->dev); + struct v4l2_fwnode_endpoint bus_cfg = { + .bus_type = V4L2_MBUS_CSI2_DPHY, + }; + struct fwnode_handle *endpoint; + unsigned int i; + int ret; + + endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL); + if (!endpoint) + return -EPROBE_DEFER; /* Could be provided by cio2-bridge */ + + ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg); + fwnode_handle_put(endpoint); + if (ret) + return ret; + + if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2) { + dev_err(ov5693->dev, "only a 2-lane CSI2 config is supported"); + ret = -EINVAL; + goto out_free_bus_cfg; + } + + if (!bus_cfg.nr_of_link_frequencies) { + dev_err(ov5693->dev, "no link frequencies defined\n"); + ret = -EINVAL; + goto out_free_bus_cfg; + } + + for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) + if (bus_cfg.link_frequencies[i] == OV5693_LINK_FREQ_419_2MHZ) + break; + + if (i == bus_cfg.nr_of_link_frequencies) { + dev_err(ov5693->dev, "supported link freq %ull not found\n", + OV5693_LINK_FREQ_419_2MHZ); + ret = -EINVAL; + goto out_free_bus_cfg; + } + +out_free_bus_cfg: + v4l2_fwnode_endpoint_free(&bus_cfg); + + return ret; +} + +static int ov5693_probe(struct i2c_client *client) +{ + struct ov5693_device *ov5693; + u32 xvclk_rate; + int ret = 0; + + ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL); + if (!ov5693) + return -ENOMEM; + + ov5693->dev = &client->dev; + + ov5693->regmap = devm_cci_regmap_init_i2c(client, 16); + if (IS_ERR(ov5693->regmap)) + return PTR_ERR(ov5693->regmap); + + ret = ov5693_check_hwcfg(ov5693); + if (ret) + return ret; + + mutex_init(&ov5693->lock); + + v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops); + + ov5693->xvclk = devm_clk_get_optional(&client->dev, "xvclk"); + if (IS_ERR(ov5693->xvclk)) + return dev_err_probe(&client->dev, PTR_ERR(ov5693->xvclk), + "failed to get xvclk: %ld\n", + PTR_ERR(ov5693->xvclk)); + + if (ov5693->xvclk) { + xvclk_rate = clk_get_rate(ov5693->xvclk); + } else { + ret = fwnode_property_read_u32(dev_fwnode(&client->dev), + "clock-frequency", + &xvclk_rate); + + if (ret) { + dev_err(&client->dev, "can't get clock frequency"); + return ret; + } + } + + if (xvclk_rate != OV5693_XVCLK_FREQ) + dev_warn(&client->dev, "Found clk freq %u, expected %u\n", + xvclk_rate, OV5693_XVCLK_FREQ); + + ret = ov5693_configure_gpios(ov5693); + if (ret) + return ret; + + ret = ov5693_get_regulators(ov5693); + if (ret) + return dev_err_probe(&client->dev, ret, + "Error fetching regulators\n"); + + ov5693->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ov5693->pad.flags = MEDIA_PAD_FL_SOURCE; + ov5693->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + + ov5693->mode.crop = ov5693_default_crop; + ov5693->mode.format = ov5693_default_fmt; + ov5693->mode.vts = __ov5693_calc_vts(ov5693->mode.format.height); + + ret = ov5693_init_controls(ov5693); + if (ret) + return ret; + + ret = media_entity_pads_init(&ov5693->sd.entity, 1, &ov5693->pad); + if (ret) + goto err_ctrl_handler_free; + + /* + * We need the driver to work in the event that pm runtime is disable in + * the kernel, so power up and verify the chip now. In the event that + * runtime pm is disabled this will leave the chip on, so that streaming + * will work. + */ + + ret = ov5693_sensor_powerup(ov5693); + if (ret) + goto err_media_entity_cleanup; + + ret = ov5693_detect(ov5693); + if (ret) + goto err_powerdown; + + pm_runtime_set_active(&client->dev); + pm_runtime_get_noresume(&client->dev); + pm_runtime_enable(&client->dev); + + ret = v4l2_async_register_subdev_sensor(&ov5693->sd); + if (ret) { + dev_err(&client->dev, "failed to register V4L2 subdev: %d", + ret); + goto err_pm_runtime; + } + + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put_autosuspend(&client->dev); + + return ret; + +err_pm_runtime: + pm_runtime_disable(&client->dev); + pm_runtime_put_noidle(&client->dev); +err_powerdown: + ov5693_sensor_powerdown(ov5693); +err_media_entity_cleanup: + media_entity_cleanup(&ov5693->sd.entity); +err_ctrl_handler_free: + v4l2_ctrl_handler_free(&ov5693->ctrls.handler); + + return ret; +} + +static void ov5693_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); + + v4l2_async_unregister_subdev(sd); + media_entity_cleanup(&ov5693->sd.entity); + v4l2_ctrl_handler_free(&ov5693->ctrls.handler); + mutex_destroy(&ov5693->lock); + + /* + * Disable runtime PM. In case runtime PM is disabled in the kernel, + * make sure to turn power off manually. + */ + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + ov5693_sensor_powerdown(ov5693); + pm_runtime_set_suspended(&client->dev); +} + +static const struct dev_pm_ops ov5693_pm_ops = { + SET_RUNTIME_PM_OPS(ov5693_sensor_suspend, ov5693_sensor_resume, NULL) +}; + +static const struct acpi_device_id ov5693_acpi_match[] = { + {"INT33BE"}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, ov5693_acpi_match); + +static const struct of_device_id ov5693_of_match[] = { + { .compatible = "ovti,ov5693", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ov5693_of_match); + +static struct i2c_driver ov5693_driver = { + .driver = { + .name = "ov5693", + .acpi_match_table = ov5693_acpi_match, + .of_match_table = ov5693_of_match, + .pm = &ov5693_pm_ops, + }, + .probe = ov5693_probe, + .remove = ov5693_remove, +}; +module_i2c_driver(ov5693_driver); + +MODULE_DESCRIPTION("A low-level driver for OmniVision 5693 sensors"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3