From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/media/rc/Kconfig | 487 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 487 insertions(+) create mode 100644 drivers/media/rc/Kconfig (limited to 'drivers/media/rc/Kconfig') diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig new file mode 100644 index 0000000000..07bdf649c6 --- /dev/null +++ b/drivers/media/rc/Kconfig @@ -0,0 +1,487 @@ +# SPDX-License-Identifier: GPL-2.0-only + +menuconfig RC_CORE + tristate "Remote Controller support" + depends on INPUT + help + Enable support for Remote Controllers on Linux. This is + needed in order to support several video capture adapters, + standalone IR receivers/transmitters, and RF receivers. + + Enable this option if you have a video capture board even + if you don't need IR, as otherwise, you may not be able to + compile the driver for your adapter. + + Say Y when you have a TV or an IR device. + +if RC_CORE + +config BPF_LIRC_MODE2 + bool "Support for eBPF programs attached to lirc devices" + depends on BPF_SYSCALL + depends on RC_CORE=y + depends on LIRC + help + Allow attaching eBPF programs to a lirc device using the bpf(2) + syscall command BPF_PROG_ATTACH. This is supported for raw IR + receivers. + + These eBPF programs can be used to decode IR into scancodes, for + IR protocols not supported by the kernel decoders. + +config LIRC + bool "LIRC user interface" + help + Enable this option to enable the Linux Infrared Remote + Control user interface (e.g. /dev/lirc*). This interface + passes raw IR to and from userspace, which is needed for + IR transmitting (aka "blasting") and for the lirc daemon. + +source "drivers/media/rc/keymaps/Kconfig" + +menuconfig RC_DECODERS + bool "Remote controller decoders" + +if RC_DECODERS + +config IR_IMON_DECODER + tristate "Enable IR raw decoder for the iMON protocol" + help + Enable this option if you have iMON PAD or Antec Veris infrared + remote control and you would like to use it with a raw IR + receiver, or if you wish to use an encoder to transmit this IR. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_MCE_KBD_DECODER + tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" + select BITREVERSE + + help + Enable this option if you have a Microsoft Remote Keyboard for + Windows Media Center Edition, which you would like to use with + a raw IR receiver in your system. + +config IR_NEC_DECODER + tristate "Enable IR raw decoder for the NEC protocol" + select BITREVERSE + + help + Enable this option if you have IR with NEC protocol, and + if the IR is decoded in software + +config IR_RC5_DECODER + tristate "Enable IR raw decoder for the RC-5 protocol" + select BITREVERSE + + help + Enable this option if you have IR with RC-5 protocol, and + if the IR is decoded in software + +config IR_RC6_DECODER + tristate "Enable IR raw decoder for the RC6 protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the RC6 protocol, and you need software decoding support. + +config IR_RCMM_DECODER + tristate "Enable IR raw decoder for the RC-MM protocol" + help + Enable this option when you have IR with RC-MM protocol, and + you need the software decoder. The driver supports 12, + 24 and 32 bits RC-MM variants. You can enable or disable the + different modes using the following RC protocol keywords: + 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'. + + To compile this driver as a module, choose M here: the module + will be called ir-rcmm-decoder. + +config IR_SANYO_DECODER + tristate "Enable IR raw decoder for the Sanyo protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), + and you need software decoding support. + +config IR_SHARP_DECODER + tristate "Enable IR raw decoder for the Sharp protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the Sharp protocol (Sharp, Denon), and you need software + decoding support. + +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. + +config IR_XMP_DECODER + tristate "Enable IR raw decoder for the XMP protocol" + select BITREVERSE + + help + Enable this option if you have IR with XMP protocol, and + if the IR is decoded in software + +endif #RC_DECODERS + +menuconfig RC_DEVICES + bool "Remote Controller devices" + +if RC_DEVICES + +config IR_ENE + tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" + depends on PNP || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for integrated infrared receiver + /transceiver made by ENE. + + You can see if you have it by looking at lspnp output. + Output should include ENE0100 ENE0200 or something similar. + + To compile this driver as a module, choose M here: the + module will be called ene_ir. + +config IR_FINTEK + tristate "Fintek Consumer Infrared Transceiver" + depends on PNP || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for integrated infrared receiver + /transceiver made by Fintek. This chip is found on assorted + Jetway motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called fintek-cir. + +config IR_GPIO_CIR + tristate "GPIO IR remote control" + depends on (OF && GPIOLIB) || COMPILE_TEST + help + Say Y if you want to use GPIO based IR Receiver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-recv. + +config IR_GPIO_TX + tristate "GPIO IR Bit Banging Transmitter" + depends on LIRC + depends on (OF && GPIOLIB) || COMPILE_TEST + help + Say Y if you want to a GPIO based IR transmitter. This is a + bit banging driver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-tx. + +config IR_HIX5HD2 + tristate "Hisilicon hix5hd2 IR remote control" + depends on (OF && HAS_IOMEM) || COMPILE_TEST + help + Say Y here if you want to use hisilicon hix5hd2 remote control. + To compile this driver as a module, choose M here: the module will be + called ir-hix5hd2. + + If you're not sure, select N here + +config IR_IGORPLUGUSB + tristate "IgorPlug-USB IR Receiver" + depends on USB + help + Say Y here if you want to use the IgorPlug-USB IR Receiver by + Igor Cesko. This device is included on the Fit-PC2. + + Note that this device can only record bursts of 36 IR pulses and + spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. + + To compile this driver as a module, choose M here: the module will + be called igorplugusb. + +config IR_IGUANA + tristate "IguanaWorks USB IR Transceiver" + depends on USB + help + Say Y here if you want to use the IguanaWorks USB IR Transceiver. + Both infrared receive and send are supported. If you want to + change the ID or the pin config, use the user space driver from + IguanaWorks. + + Only firmware 0x0205 and later is supported. + + To compile this driver as a module, choose M here: the module will + be called iguanair. + +config IR_IMON + tristate "SoundGraph iMON Receiver and Display" + depends on USB + help + Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) + IR Receiver and/or LCD/VFD/VGA display. + + To compile this driver as a module, choose M here: the + module will be called imon. + +config IR_IMON_RAW + tristate "SoundGraph iMON Receiver (early raw IR models)" + depends on USB + help + Say Y here if you want to use a SoundGraph iMON IR Receiver, + early raw models. + + To compile this driver as a module, choose M here: the + module will be called imon_raw. + +config IR_ITE_CIR + tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" + depends on PNP || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for integrated infrared receivers + /transceivers made by ITE Tech Inc. These are found in + several ASUS devices, like the ASUS Digimatrix or the ASUS + EEEBox 1501U. + + To compile this driver as a module, choose M here: the + module will be called ite-cir. + +config IR_MCEUSB + tristate "Windows Media Center Ed. eHome Infrared Transceiver" + depends on USB + help + Say Y here if you want to use a Windows Media Center Edition + eHome Infrared Transceiver. + + To compile this driver as a module, choose M here: the + module will be called mceusb. + +config IR_MESON + tristate "Amlogic Meson IR remote receiver" + depends on ARCH_MESON || COMPILE_TEST + select REGMAP_MMIO + help + Say Y if you want to use the IR remote receiver available + on Amlogic Meson SoCs. + + To compile this driver as a module, choose M here: the + module will be called meson-ir. + +config IR_MESON_TX + tristate "Amlogic Meson IR TX" + depends on ARCH_MESON || COMPILE_TEST + help + Say Y if you want to use the IR transmitter available on + Amlogic Meson SoCs. + + To compile this driver as a module, choose M here: the + module will be called meson-ir-tx. + +config IR_MTK + tristate "Mediatek IR remote receiver" + depends on ARCH_MEDIATEK || COMPILE_TEST + help + Say Y if you want to use the IR remote receiver available + on Mediatek SoCs. + + To compile this driver as a module, choose M here: the + module will be called mtk-cir. + +config IR_NUVOTON + tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" + depends on PNP || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for integrated infrared receiver + /transceiver made by Nuvoton (formerly Winbond). This chip is + found in the ASRock ION 330HT, as well as assorted Intel + DP55-series motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called nuvoton-cir. + +config IR_PWM_TX + tristate "PWM IR transmitter" + depends on LIRC + depends on PWM + depends on OF + help + Say Y if you want to use a PWM based IR transmitter. This is + more power efficient than the bit banging gpio driver. + + To compile this driver as a module, choose M here: the module will + be called pwm-ir-tx. + +config IR_REDRAT3 + tristate "RedRat3 IR Transceiver" + depends on USB + select NEW_LEDS + select LEDS_CLASS + help + Say Y here if you want to use a RedRat3 Infrared Transceiver. + + To compile this driver as a module, choose M here: the + module will be called redrat3. + +config IR_RX51 + tristate "Nokia N900 IR transmitter diode" + depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE + help + Say Y or M here if you want to enable support for the IR + transmitter diode built in the Nokia N900 (RX51) device. + + The driver uses omap DM timers for generating the carrier + wave and pulses. + +config IR_SERIAL + tristate "Homebrew Serial Port Receiver" + depends on HAS_IOPORT + help + Say Y if you want to use Homebrew Serial Port Receivers and + Transceivers. + + To compile this driver as a module, choose M here: the module will + be called serial-ir. + +config IR_SERIAL_TRANSMITTER + bool "Serial Port Transmitter" + depends on IR_SERIAL + help + Serial Port Transmitter support + +config IR_SPI + tristate "SPI connected IR LED" + depends on SPI && LIRC + depends on OF + help + Say Y if you want to use an IR LED connected through SPI bus. + + To compile this driver as a module, choose M here: the module will be + called ir-spi. + +config IR_STREAMZAP + tristate "Streamzap PC Remote IR Receiver" + depends on USB + help + Say Y here if you want to use a Streamzap PC Remote + Infrared Receiver. + + To compile this driver as a module, choose M here: the + module will be called streamzap. + +config IR_SUNXI + tristate "SUNXI IR remote control" + depends on ARCH_SUNXI || COMPILE_TEST + help + Say Y if you want to use sunXi internal IR Controller + + To compile this driver as a module, choose M here: the module will + be called sunxi-ir. + +config IR_TOY + tristate "Infrared Toy and IR Droid" + depends on USB + help + Say Y here if you want to use the Infrared Toy or IR Droid, USB + versions. + + To compile this driver as a module, choose M here: the module will be + called ir_toy. + +config IR_TTUSBIR + tristate "TechnoTrend USB IR Receiver" + depends on USB + select NEW_LEDS + select LEDS_CLASS + help + Say Y here if you want to use the TechnoTrend USB IR Receiver. The + driver can control the led. + + To compile this driver as a module, choose M here: the module will + be called ttusbir. + +config IR_WINBOND_CIR + tristate "Winbond IR remote control" + depends on (X86 && PNP) || COMPILE_TEST + depends on HAS_IOPORT + select NEW_LEDS + select LEDS_CLASS + select BITREVERSE + help + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series + motherboards). + + To compile this driver as a module, choose M here: the module will + be called winbond_cir. + +config RC_ATI_REMOTE + tristate "ATI / X10 based USB RF remote controls" + depends on USB + help + Say Y here if you want to use an X10 based USB remote control. + These are RF remotes with USB receivers. + + Such devices include the ATI remote that comes with many of ATI's + All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, + Medion RF remote, and SnapStream FireFly remote. + + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. + +config RC_LOOPBACK + tristate "Remote Control Loopback Driver" + help + Say Y here if you want support for the remote control loopback + driver which allows TX data to be sent back as RX data. + This is mostly useful for debugging purposes. + + If you're not sure, select N here. + + To compile this driver as a module, choose M here: the module will + be called rc_loopback. + +config RC_ST + tristate "ST remote control receiver" + depends on ARCH_STI || COMPILE_TEST + help + Say Y here if you want support for ST remote control driver + which allows both IR and UHF RX. + The driver passes raw pulse and space information to the LIRC decoder. + + If you're not sure, select N here. + +config RC_XBOX_DVD + tristate "Xbox DVD Movie Playback Kit" + depends on USB + help + Say Y here if you want to use the Xbox DVD Movie Playback Kit. + These are IR remotes with USB receivers for the Original Xbox (2001). + + To compile this driver as a module, choose M here: the module will be + called xbox_remote. + +source "drivers/media/rc/img-ir/Kconfig" + +endif #RC_DEVICES + +endif #RC_CORE -- cgit v1.2.3