From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/misc/genwqe/card_ddcb.h | 179 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 drivers/misc/genwqe/card_ddcb.h (limited to 'drivers/misc/genwqe/card_ddcb.h') diff --git a/drivers/misc/genwqe/card_ddcb.h b/drivers/misc/genwqe/card_ddcb.h new file mode 100644 index 0000000000..a47ff49aee --- /dev/null +++ b/drivers/misc/genwqe/card_ddcb.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __CARD_DDCB_H__ +#define __CARD_DDCB_H__ + +/** + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp + * Author: Joerg-Stephan Vogt + * Author: Michael Jung + * Author: Michael Ruettger + */ + +#include +#include + +#include "genwqe_driver.h" +#include "card_base.h" + +/** + * struct ddcb - Device Driver Control Block DDCB + * @hsi: Hardware software interlock + * @shi: Software hardware interlock. Hsi and shi are used to interlock + * software and hardware activities. We are using a compare and + * swap operation to ensure that there are no races when + * activating new DDCBs on the queue, or when we need to + * purge a DDCB from a running queue. + * @acfunc: Accelerator function addresses a unit within the chip + * @cmd: Command to work on + * @cmdopts_16: Options for the command + * @asiv: Input data + * @asv: Output data + * + * The DDCB data format is big endian. Multiple consequtive DDBCs form + * a DDCB queue. + */ +#define ASIV_LENGTH 104 /* Old specification without ATS field */ +#define ASIV_LENGTH_ATS 96 /* New specification with ATS field */ +#define ASV_LENGTH 64 + +struct ddcb { + union { + __be32 icrc_hsi_shi_32; /* iCRC, Hardware/SW interlock */ + struct { + __be16 icrc_16; + u8 hsi; + u8 shi; + }; + }; + u8 pre; /* Preamble */ + u8 xdir; /* Execution Directives */ + __be16 seqnum_16; /* Sequence Number */ + + u8 acfunc; /* Accelerator Function.. */ + u8 cmd; /* Command. */ + __be16 cmdopts_16; /* Command Options */ + u8 sur; /* Status Update Rate */ + u8 psp; /* Protection Section Pointer */ + __be16 rsvd_0e_16; /* Reserved invariant */ + + __be64 fwiv_64; /* Firmware Invariant. */ + + union { + struct { + __be64 ats_64; /* Address Translation Spec */ + u8 asiv[ASIV_LENGTH_ATS]; /* New ASIV */ + } n; + u8 __asiv[ASIV_LENGTH]; /* obsolete */ + }; + u8 asv[ASV_LENGTH]; /* Appl Spec Variant */ + + __be16 rsvd_c0_16; /* Reserved Variant */ + __be16 vcrc_16; /* Variant CRC */ + __be32 rsvd_32; /* Reserved unprotected */ + + __be64 deque_ts_64; /* Deque Time Stamp. */ + + __be16 retc_16; /* Return Code */ + __be16 attn_16; /* Attention/Extended Error Codes */ + __be32 progress_32; /* Progress indicator. */ + + __be64 cmplt_ts_64; /* Completion Time Stamp. */ + + /* The following layout matches the new service layer format */ + __be32 ibdc_32; /* Inbound Data Count (* 256) */ + __be32 obdc_32; /* Outbound Data Count (* 256) */ + + __be64 rsvd_SLH_64; /* Reserved for hardware */ + union { /* private data for driver */ + u8 priv[8]; + __be64 priv_64; + }; + __be64 disp_ts_64; /* Dispatch TimeStamp */ +} __attribute__((__packed__)); + +/* CRC polynomials for DDCB */ +#define CRC16_POLYNOMIAL 0x1021 + +/* + * SHI: Software to Hardware Interlock + * This 1 byte field is written by software to interlock the + * movement of one queue entry to another with the hardware in the + * chip. + */ +#define DDCB_SHI_INTR 0x04 /* Bit 2 */ +#define DDCB_SHI_PURGE 0x02 /* Bit 1 */ +#define DDCB_SHI_NEXT 0x01 /* Bit 0 */ + +/* + * HSI: Hardware to Software interlock + * This 1 byte field is written by hardware to interlock the movement + * of one queue entry to another with the software in the chip. + */ +#define DDCB_HSI_COMPLETED 0x40 /* Bit 6 */ +#define DDCB_HSI_FETCHED 0x04 /* Bit 2 */ + +/* + * Accessing HSI/SHI is done 32-bit wide + * Normally 16-bit access would work too, but on some platforms the + * 16 compare and swap operation is not supported. Therefore + * switching to 32-bit such that those platforms will work too. + * + * iCRC HSI/SHI + */ +#define DDCB_INTR_BE32 cpu_to_be32(0x00000004) +#define DDCB_PURGE_BE32 cpu_to_be32(0x00000002) +#define DDCB_NEXT_BE32 cpu_to_be32(0x00000001) +#define DDCB_COMPLETED_BE32 cpu_to_be32(0x00004000) +#define DDCB_FETCHED_BE32 cpu_to_be32(0x00000400) + +/* Definitions of DDCB presets */ +#define DDCB_PRESET_PRE 0x80 +#define ICRC_LENGTH(n) ((n) + 8 + 8 + 8) /* used ASIV + hdr fields */ +#define VCRC_LENGTH(n) ((n)) /* used ASV */ + +/* + * Genwqe Scatter Gather list + * Each element has up to 8 entries. + * The chaining element is element 0 cause of prefetching needs. + */ + +/* + * 0b0110 Chained descriptor. The descriptor is describing the next + * descriptor list. + */ +#define SG_CHAINED (0x6) + +/* + * 0b0010 First entry of a descriptor list. Start from a Buffer-Empty + * condition. + */ +#define SG_DATA (0x2) + +/* + * 0b0000 Early terminator. This is the last entry on the list + * irregardless of the length indicated. + */ +#define SG_END_LIST (0x0) + +/** + * struct sglist - Scatter gather list + * @target_addr: Either a dma addr of memory to work on or a + * dma addr or a subsequent sglist block. + * @len: Length of the data block. + * @flags: See above. + * + * Depending on the command the GenWQE card can use a scatter gather + * list to describe the memory it works on. Always 8 sg_entry's form + * a block. + */ +struct sg_entry { + __be64 target_addr; + __be32 len; + __be32 flags; +}; + +#endif /* __CARD_DDCB_H__ */ -- cgit v1.2.3