From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- drivers/mmc/host/sdhci-esdhc-imx.c | 1995 ++++++++++++++++++++++++++++++++++++ 1 file changed, 1995 insertions(+) create mode 100644 drivers/mmc/host/sdhci-esdhc-imx.c (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c new file mode 100644 index 0000000000..3b8030f355 --- /dev/null +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -0,0 +1,1995 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Freescale eSDHC i.MX controller driver for the platform bus. + * + * derived from the OF-version. + * + * Copyright (c) 2010 Pengutronix e.K. + * Author: Wolfram Sang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sdhci-cqhci.h" +#include "sdhci-pltfm.h" +#include "sdhci-esdhc.h" +#include "cqhci.h" + +#define ESDHC_SYS_CTRL_DTOCV_MASK 0x0f +#define ESDHC_CTRL_D3CD 0x08 +#define ESDHC_BURST_LEN_EN_INCR (1 << 27) +/* VENDOR SPEC register */ +#define ESDHC_VENDOR_SPEC 0xc0 +#define ESDHC_VENDOR_SPEC_SDIO_QUIRK (1 << 1) +#define ESDHC_VENDOR_SPEC_VSELECT (1 << 1) +#define ESDHC_VENDOR_SPEC_FRC_SDCLK_ON (1 << 8) +#define ESDHC_DEBUG_SEL_AND_STATUS_REG 0xc2 +#define ESDHC_DEBUG_SEL_REG 0xc3 +#define ESDHC_DEBUG_SEL_MASK 0xf +#define ESDHC_DEBUG_SEL_CMD_STATE 1 +#define ESDHC_DEBUG_SEL_DATA_STATE 2 +#define ESDHC_DEBUG_SEL_TRANS_STATE 3 +#define ESDHC_DEBUG_SEL_DMA_STATE 4 +#define ESDHC_DEBUG_SEL_ADMA_STATE 5 +#define ESDHC_DEBUG_SEL_FIFO_STATE 6 +#define ESDHC_DEBUG_SEL_ASYNC_FIFO_STATE 7 +#define ESDHC_WTMK_LVL 0x44 +#define ESDHC_WTMK_DEFAULT_VAL 0x10401040 +#define ESDHC_WTMK_LVL_RD_WML_MASK 0x000000FF +#define ESDHC_WTMK_LVL_RD_WML_SHIFT 0 +#define ESDHC_WTMK_LVL_WR_WML_MASK 0x00FF0000 +#define ESDHC_WTMK_LVL_WR_WML_SHIFT 16 +#define ESDHC_WTMK_LVL_WML_VAL_DEF 64 +#define ESDHC_WTMK_LVL_WML_VAL_MAX 128 +#define ESDHC_MIX_CTRL 0x48 +#define ESDHC_MIX_CTRL_DDREN (1 << 3) +#define ESDHC_MIX_CTRL_AC23EN (1 << 7) +#define ESDHC_MIX_CTRL_EXE_TUNE (1 << 22) +#define ESDHC_MIX_CTRL_SMPCLK_SEL (1 << 23) +#define ESDHC_MIX_CTRL_AUTO_TUNE_EN (1 << 24) +#define ESDHC_MIX_CTRL_FBCLK_SEL (1 << 25) +#define ESDHC_MIX_CTRL_HS400_EN (1 << 26) +#define ESDHC_MIX_CTRL_HS400_ES_EN (1 << 27) +/* Bits 3 and 6 are not SDHCI standard definitions */ +#define ESDHC_MIX_CTRL_SDHCI_MASK 0xb7 +/* Tuning bits */ +#define ESDHC_MIX_CTRL_TUNING_MASK 0x03c00000 + +/* dll control register */ +#define ESDHC_DLL_CTRL 0x60 +#define ESDHC_DLL_OVERRIDE_VAL_SHIFT 9 +#define ESDHC_DLL_OVERRIDE_EN_SHIFT 8 + +/* tune control register */ +#define ESDHC_TUNE_CTRL_STATUS 0x68 +#define ESDHC_TUNE_CTRL_STEP 1 +#define ESDHC_TUNE_CTRL_MIN 0 +#define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) + +/* strobe dll register */ +#define ESDHC_STROBE_DLL_CTRL 0x70 +#define ESDHC_STROBE_DLL_CTRL_ENABLE (1 << 0) +#define ESDHC_STROBE_DLL_CTRL_RESET (1 << 1) +#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT 0x7 +#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT 3 +#define ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT (4 << 20) + +#define ESDHC_STROBE_DLL_STATUS 0x74 +#define ESDHC_STROBE_DLL_STS_REF_LOCK (1 << 1) +#define ESDHC_STROBE_DLL_STS_SLV_LOCK 0x1 + +#define ESDHC_VEND_SPEC2 0xc8 +#define ESDHC_VEND_SPEC2_EN_BUSY_IRQ (1 << 8) +#define ESDHC_VEND_SPEC2_AUTO_TUNE_8BIT_EN (1 << 4) +#define ESDHC_VEND_SPEC2_AUTO_TUNE_4BIT_EN (0 << 4) +#define ESDHC_VEND_SPEC2_AUTO_TUNE_1BIT_EN (2 << 4) +#define ESDHC_VEND_SPEC2_AUTO_TUNE_CMD_EN (1 << 6) +#define ESDHC_VEND_SPEC2_AUTO_TUNE_MODE_MASK (7 << 4) + +#define ESDHC_TUNING_CTRL 0xcc +#define ESDHC_STD_TUNING_EN (1 << 24) +/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ +#define ESDHC_TUNING_START_TAP_DEFAULT 0x1 +#define ESDHC_TUNING_START_TAP_MASK 0x7f +#define ESDHC_TUNING_CMD_CRC_CHECK_DISABLE (1 << 7) +#define ESDHC_TUNING_STEP_DEFAULT 0x1 +#define ESDHC_TUNING_STEP_MASK 0x00070000 +#define ESDHC_TUNING_STEP_SHIFT 16 + +/* pinctrl state */ +#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz" +#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz" + +/* + * Our interpretation of the SDHCI_HOST_CONTROL register + */ +#define ESDHC_CTRL_4BITBUS (0x1 << 1) +#define ESDHC_CTRL_8BITBUS (0x2 << 1) +#define ESDHC_CTRL_BUSWIDTH_MASK (0x3 << 1) +#define USDHC_GET_BUSWIDTH(c) (c & ESDHC_CTRL_BUSWIDTH_MASK) + +/* + * There is an INT DMA ERR mismatch between eSDHC and STD SDHC SPEC: + * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design, + * but bit28 is used as the INT DMA ERR in fsl eSDHC design. + * Define this macro DMA error INT for fsl eSDHC + */ +#define ESDHC_INT_VENDOR_SPEC_DMA_ERR (1 << 28) + +/* the address offset of CQHCI */ +#define ESDHC_CQHCI_ADDR_OFFSET 0x100 + +/* + * The CMDTYPE of the CMD register (offset 0xE) should be set to + * "11" when the STOP CMD12 is issued on imx53 to abort one + * open ended multi-blk IO. Otherwise the TC INT wouldn't + * be generated. + * In exact block transfer, the controller doesn't complete the + * operations automatically as required at the end of the + * transfer and remains on hold if the abort command is not sent. + * As a result, the TC flag is not asserted and SW received timeout + * exception. Bit1 of Vendor Spec register is used to fix it. + */ +#define ESDHC_FLAG_MULTIBLK_NO_INT BIT(1) +/* + * The flag tells that the ESDHC controller is an USDHC block that is + * integrated on the i.MX6 series. + */ +#define ESDHC_FLAG_USDHC BIT(3) +/* The IP supports manual tuning process */ +#define ESDHC_FLAG_MAN_TUNING BIT(4) +/* The IP supports standard tuning process */ +#define ESDHC_FLAG_STD_TUNING BIT(5) +/* The IP has SDHCI_CAPABILITIES_1 register */ +#define ESDHC_FLAG_HAVE_CAP1 BIT(6) +/* + * The IP has erratum ERR004536 + * uSDHC: ADMA Length Mismatch Error occurs if the AHB read access is slow, + * when reading data from the card + * This flag is also set for i.MX25 and i.MX35 in order to get + * SDHCI_QUIRK_BROKEN_ADMA, but for different reasons (ADMA capability bits). + */ +#define ESDHC_FLAG_ERR004536 BIT(7) +/* The IP supports HS200 mode */ +#define ESDHC_FLAG_HS200 BIT(8) +/* The IP supports HS400 mode */ +#define ESDHC_FLAG_HS400 BIT(9) +/* + * The IP has errata ERR010450 + * uSDHC: At 1.8V due to the I/O timing limit, for SDR mode, SD card + * clock can't exceed 150MHz, for DDR mode, SD card clock can't exceed 45MHz. + */ +#define ESDHC_FLAG_ERR010450 BIT(10) +/* The IP supports HS400ES mode */ +#define ESDHC_FLAG_HS400_ES BIT(11) +/* The IP has Host Controller Interface for Command Queuing */ +#define ESDHC_FLAG_CQHCI BIT(12) +/* need request pmqos during low power */ +#define ESDHC_FLAG_PMQOS BIT(13) +/* The IP state got lost in low power mode */ +#define ESDHC_FLAG_STATE_LOST_IN_LPMODE BIT(14) +/* The IP lost clock rate in PM_RUNTIME */ +#define ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME BIT(15) +/* + * The IP do not support the ACMD23 feature completely when use ADMA mode. + * In ADMA mode, it only use the 16 bit block count of the register 0x4 + * (BLOCK_ATT) as the CMD23's argument for ACMD23 mode, which means it will + * ignore the upper 16 bit of the CMD23's argument. This will block the reliable + * write operation in RPMB, because RPMB reliable write need to set the bit31 + * of the CMD23's argument. + * imx6qpdl/imx6sx/imx6sl/imx7d has this limitation only for ADMA mode, SDMA + * do not has this limitation. so when these SoC use ADMA mode, it need to + * disable the ACMD23 feature. + */ +#define ESDHC_FLAG_BROKEN_AUTO_CMD23 BIT(16) + +/* ERR004536 is not applicable for the IP */ +#define ESDHC_FLAG_SKIP_ERR004536 BIT(17) + +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ + ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + +/* + * struct esdhc_platform_data - platform data for esdhc on i.MX + * + * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. + * + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) + */ + +struct esdhc_platform_data { + enum wp_types wp_type; + enum cd_types cd_type; + int max_bus_width; + unsigned int delay_line; + unsigned int tuning_step; /* The delay cell steps in tuning procedure */ + unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */ + unsigned int strobe_dll_delay_target; /* The delay cell for strobe pad (read clock) */ +}; + +struct esdhc_soc_data { + u32 flags; +}; + +static const struct esdhc_soc_data esdhc_imx25_data = { + .flags = ESDHC_FLAG_ERR004536, +}; + +static const struct esdhc_soc_data esdhc_imx35_data = { + .flags = ESDHC_FLAG_ERR004536, +}; + +static const struct esdhc_soc_data esdhc_imx51_data = { + .flags = 0, +}; + +static const struct esdhc_soc_data esdhc_imx53_data = { + .flags = ESDHC_FLAG_MULTIBLK_NO_INT, +}; + +static const struct esdhc_soc_data usdhc_imx6q_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING + | ESDHC_FLAG_BROKEN_AUTO_CMD23, +}; + +static const struct esdhc_soc_data usdhc_imx6sl_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536 + | ESDHC_FLAG_HS200 + | ESDHC_FLAG_BROKEN_AUTO_CMD23, +}; + +static const struct esdhc_soc_data usdhc_imx6sll_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 + | ESDHC_FLAG_STATE_LOST_IN_LPMODE, +}; + +static const struct esdhc_soc_data usdhc_imx6sx_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_STATE_LOST_IN_LPMODE + | ESDHC_FLAG_BROKEN_AUTO_CMD23, +}; + +static const struct esdhc_soc_data usdhc_imx6ull_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_ERR010450 + | ESDHC_FLAG_STATE_LOST_IN_LPMODE, +}; + +static const struct esdhc_soc_data usdhc_imx7d_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 + | ESDHC_FLAG_STATE_LOST_IN_LPMODE + | ESDHC_FLAG_BROKEN_AUTO_CMD23, +}; + +static struct esdhc_soc_data usdhc_s32g2_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES + | ESDHC_FLAG_SKIP_ERR004536, +}; + +static struct esdhc_soc_data usdhc_imx7ulp_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400 + | ESDHC_FLAG_STATE_LOST_IN_LPMODE, +}; +static struct esdhc_soc_data usdhc_imxrt1050_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200, +}; + +static struct esdhc_soc_data usdhc_imx8qxp_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES + | ESDHC_FLAG_STATE_LOST_IN_LPMODE + | ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME, +}; + +static struct esdhc_soc_data usdhc_imx8mm_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES + | ESDHC_FLAG_STATE_LOST_IN_LPMODE, +}; + +struct pltfm_imx_data { + u32 scratchpad; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_100mhz; + struct pinctrl_state *pins_200mhz; + const struct esdhc_soc_data *socdata; + struct esdhc_platform_data boarddata; + struct clk *clk_ipg; + struct clk *clk_ahb; + struct clk *clk_per; + unsigned int actual_clock; + + /* + * USDHC has one limition, require the SDIO device a different + * register setting. Driver has to recognize card type during + * the card init, but at this stage, mmc_host->card is not + * available. So involve this field to save the card type + * during card init through usdhc_init_card(). + */ + unsigned int init_card_type; + + enum { + NO_CMD_PENDING, /* no multiblock command pending */ + MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ + WAIT_FOR_INT, /* sent CMD12, waiting for response INT */ + } multiblock_status; + u32 is_ddr; + struct pm_qos_request pm_qos_req; +}; + +static const struct of_device_id imx_esdhc_dt_ids[] = { + { .compatible = "fsl,imx25-esdhc", .data = &esdhc_imx25_data, }, + { .compatible = "fsl,imx35-esdhc", .data = &esdhc_imx35_data, }, + { .compatible = "fsl,imx51-esdhc", .data = &esdhc_imx51_data, }, + { .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, }, + { .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, }, + { .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, }, + { .compatible = "fsl,imx6sll-usdhc", .data = &usdhc_imx6sll_data, }, + { .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, }, + { .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, }, + { .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, }, + { .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, }, + { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, }, + { .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, }, + { .compatible = "fsl,imxrt1050-usdhc", .data = &usdhc_imxrt1050_data, }, + { .compatible = "nxp,s32g2-usdhc", .data = &usdhc_s32g2_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); + +static inline int is_imx25_esdhc(struct pltfm_imx_data *data) +{ + return data->socdata == &esdhc_imx25_data; +} + +static inline int is_imx53_esdhc(struct pltfm_imx_data *data) +{ + return data->socdata == &esdhc_imx53_data; +} + +static inline int esdhc_is_usdhc(struct pltfm_imx_data *data) +{ + return !!(data->socdata->flags & ESDHC_FLAG_USDHC); +} + +static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) +{ + void __iomem *base = host->ioaddr + (reg & ~0x3); + u32 shift = (reg & 0x3) * 8; + + writel(((readl(base) & ~(mask << shift)) | (val << shift)), base); +} + +#define DRIVER_NAME "sdhci-esdhc-imx" +#define ESDHC_IMX_DUMP(f, x...) \ + pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x) +static void esdhc_dump_debug_regs(struct sdhci_host *host) +{ + int i; + char *debug_status[7] = { + "cmd debug status", + "data debug status", + "trans debug status", + "dma debug status", + "adma debug status", + "fifo debug status", + "async fifo debug status" + }; + + ESDHC_IMX_DUMP("========= ESDHC IMX DEBUG STATUS DUMP =========\n"); + for (i = 0; i < 7; i++) { + esdhc_clrset_le(host, ESDHC_DEBUG_SEL_MASK, + ESDHC_DEBUG_SEL_CMD_STATE + i, ESDHC_DEBUG_SEL_REG); + ESDHC_IMX_DUMP("%s: 0x%04x\n", debug_status[i], + readw(host->ioaddr + ESDHC_DEBUG_SEL_AND_STATUS_REG)); + } + + esdhc_clrset_le(host, ESDHC_DEBUG_SEL_MASK, 0, ESDHC_DEBUG_SEL_REG); + +} + +static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host) +{ + u32 present_state; + int ret; + + ret = readl_poll_timeout(host->ioaddr + ESDHC_PRSSTAT, present_state, + (present_state & ESDHC_CLOCK_GATE_OFF), 2, 100); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), "%s: card clock still not gate off in 100us!.\n", __func__); +} + +/* Enable the auto tuning circuit to check the CMD line and BUS line */ +static inline void usdhc_auto_tuning_mode_sel_and_en(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 buswidth, auto_tune_buswidth; + u32 reg; + + buswidth = USDHC_GET_BUSWIDTH(readl(host->ioaddr + SDHCI_HOST_CONTROL)); + + switch (buswidth) { + case ESDHC_CTRL_8BITBUS: + auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_8BIT_EN; + break; + case ESDHC_CTRL_4BITBUS: + auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_4BIT_EN; + break; + default: /* 1BITBUS */ + auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_1BIT_EN; + break; + } + + /* + * For USDHC, auto tuning circuit can not handle the async sdio + * device interrupt correctly. When sdio device use 4 data lines, + * async sdio interrupt will use the shared DAT[1], if enable auto + * tuning circuit check these 4 data lines, include the DAT[1], + * this circuit will detect this interrupt, take this as a data on + * DAT[1], and adjust the delay cell wrongly. + * This is the hardware design limitation, to avoid this, for sdio + * device, config the auto tuning circuit only check DAT[0] and CMD + * line. + */ + if (imx_data->init_card_type == MMC_TYPE_SDIO) + auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_1BIT_EN; + + esdhc_clrset_le(host, ESDHC_VEND_SPEC2_AUTO_TUNE_MODE_MASK, + auto_tune_buswidth | ESDHC_VEND_SPEC2_AUTO_TUNE_CMD_EN, + ESDHC_VEND_SPEC2); + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); +} + +static u32 esdhc_readl_le(struct sdhci_host *host, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 val = readl(host->ioaddr + reg); + + if (unlikely(reg == SDHCI_PRESENT_STATE)) { + u32 fsl_prss = val; + /* save the least 20 bits */ + val = fsl_prss & 0x000FFFFF; + /* move dat[0-3] bits */ + val |= (fsl_prss & 0x0F000000) >> 4; + /* move cmd line bit */ + val |= (fsl_prss & 0x00800000) << 1; + } + + if (unlikely(reg == SDHCI_CAPABILITIES)) { + /* ignore bit[0-15] as it stores cap_1 register val for mx6sl */ + if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1) + val &= 0xffff0000; + + /* In FSL esdhc IC module, only bit20 is used to indicate the + * ADMA2 capability of esdhc, but this bit is messed up on + * some SOCs (e.g. on MX25, MX35 this bit is set, but they + * don't actually support ADMA2). So set the BROKEN_ADMA + * quirk on MX25/35 platforms. + */ + + if (val & SDHCI_CAN_DO_ADMA1) { + val &= ~SDHCI_CAN_DO_ADMA1; + val |= SDHCI_CAN_DO_ADMA2; + } + } + + if (unlikely(reg == SDHCI_CAPABILITIES_1)) { + if (esdhc_is_usdhc(imx_data)) { + if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1) + val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF; + else + /* imx6q/dl does not have cap_1 register, fake one */ + val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 + | SDHCI_SUPPORT_SDR50 + | SDHCI_USE_SDR50_TUNING + | FIELD_PREP(SDHCI_RETUNING_MODE_MASK, + SDHCI_TUNING_MODE_3); + + /* + * Do not advertise faster UHS modes if there are no + * pinctrl states for 100MHz/200MHz. + */ + if (IS_ERR_OR_NULL(imx_data->pins_100mhz)) + val &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); + if (IS_ERR_OR_NULL(imx_data->pins_200mhz)) + val &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_HS400); + } + } + + if (unlikely(reg == SDHCI_MAX_CURRENT) && esdhc_is_usdhc(imx_data)) { + val = 0; + val |= FIELD_PREP(SDHCI_MAX_CURRENT_330_MASK, 0xFF); + val |= FIELD_PREP(SDHCI_MAX_CURRENT_300_MASK, 0xFF); + val |= FIELD_PREP(SDHCI_MAX_CURRENT_180_MASK, 0xFF); + } + + if (unlikely(reg == SDHCI_INT_STATUS)) { + if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) { + val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; + val |= SDHCI_INT_ADMA_ERROR; + } + + /* + * mask off the interrupt we get in response to the manually + * sent CMD12 + */ + if ((imx_data->multiblock_status == WAIT_FOR_INT) && + ((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) { + val &= ~SDHCI_INT_RESPONSE; + writel(SDHCI_INT_RESPONSE, host->ioaddr + + SDHCI_INT_STATUS); + imx_data->multiblock_status = NO_CMD_PENDING; + } + } + + return val; +} + +static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 data; + + if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE || + reg == SDHCI_INT_STATUS)) { + if ((val & SDHCI_INT_CARD_INT) && !esdhc_is_usdhc(imx_data)) { + /* + * Clear and then set D3CD bit to avoid missing the + * card interrupt. This is an eSDHC controller problem + * so we need to apply the following workaround: clear + * and set D3CD bit will make eSDHC re-sample the card + * interrupt. In case a card interrupt was lost, + * re-sample it by the following steps. + */ + data = readl(host->ioaddr + SDHCI_HOST_CONTROL); + data &= ~ESDHC_CTRL_D3CD; + writel(data, host->ioaddr + SDHCI_HOST_CONTROL); + data |= ESDHC_CTRL_D3CD; + writel(data, host->ioaddr + SDHCI_HOST_CONTROL); + } + + if (val & SDHCI_INT_ADMA_ERROR) { + val &= ~SDHCI_INT_ADMA_ERROR; + val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR; + } + } + + if (unlikely((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (reg == SDHCI_INT_STATUS) + && (val & SDHCI_INT_DATA_END))) { + u32 v; + v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + + if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS) + { + /* send a manual CMD12 with RESPTYP=none */ + data = MMC_STOP_TRANSMISSION << 24 | + SDHCI_CMD_ABORTCMD << 16; + writel(data, host->ioaddr + SDHCI_TRANSFER_MODE); + imx_data->multiblock_status = WAIT_FOR_INT; + } + } + + writel(val, host->ioaddr + reg); +} + +static u16 esdhc_readw_le(struct sdhci_host *host, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u16 ret = 0; + u32 val; + + if (unlikely(reg == SDHCI_HOST_VERSION)) { + reg ^= 2; + if (esdhc_is_usdhc(imx_data)) { + /* + * The usdhc register returns a wrong host version. + * Correct it here. + */ + return SDHCI_SPEC_300; + } + } + + if (unlikely(reg == SDHCI_HOST_CONTROL2)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + if (val & ESDHC_VENDOR_SPEC_VSELECT) + ret |= SDHCI_CTRL_VDD_180; + + if (esdhc_is_usdhc(imx_data)) { + if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) + val = readl(host->ioaddr + ESDHC_MIX_CTRL); + else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) + /* the std tuning bits is in ACMD12_ERR for imx6sl */ + val = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); + } + + if (val & ESDHC_MIX_CTRL_EXE_TUNE) + ret |= SDHCI_CTRL_EXEC_TUNING; + if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) + ret |= SDHCI_CTRL_TUNED_CLK; + + ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; + + return ret; + } + + if (unlikely(reg == SDHCI_TRANSFER_MODE)) { + if (esdhc_is_usdhc(imx_data)) { + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + ret = m & ESDHC_MIX_CTRL_SDHCI_MASK; + /* Swap AC23 bit */ + if (m & ESDHC_MIX_CTRL_AC23EN) { + ret &= ~ESDHC_MIX_CTRL_AC23EN; + ret |= SDHCI_TRNS_AUTO_CMD23; + } + } else { + ret = readw(host->ioaddr + SDHCI_TRANSFER_MODE); + } + + return ret; + } + + return readw(host->ioaddr + reg); +} + +static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 new_val = 0; + + switch (reg) { + case SDHCI_CLOCK_CONTROL: + new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + if (val & SDHCI_CLOCK_CARD_EN) + new_val |= ESDHC_VENDOR_SPEC_FRC_SDCLK_ON; + else + new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON; + writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); + if (!(new_val & ESDHC_VENDOR_SPEC_FRC_SDCLK_ON)) + esdhc_wait_for_card_clock_gate_off(host); + return; + case SDHCI_HOST_CONTROL2: + new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + if (val & SDHCI_CTRL_VDD_180) + new_val |= ESDHC_VENDOR_SPEC_VSELECT; + else + new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; + writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + if (val & SDHCI_CTRL_TUNED_CLK) { + v |= ESDHC_MIX_CTRL_SMPCLK_SEL; + } else { + v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; + } + + if (val & SDHCI_CTRL_EXEC_TUNING) { + v |= ESDHC_MIX_CTRL_EXE_TUNE; + m |= ESDHC_MIX_CTRL_FBCLK_SEL; + } else { + v &= ~ESDHC_MIX_CTRL_EXE_TUNE; + } + + writel(v, host->ioaddr + SDHCI_AUTO_CMD_STATUS); + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + } + return; + case SDHCI_TRANSFER_MODE: + if ((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (host->cmd->opcode == SD_IO_RW_EXTENDED) + && (host->cmd->data->blocks > 1) + && (host->cmd->data->flags & MMC_DATA_READ)) { + u32 v; + v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + } + + if (esdhc_is_usdhc(imx_data)) { + u32 wml; + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + /* Swap AC23 bit */ + if (val & SDHCI_TRNS_AUTO_CMD23) { + val &= ~SDHCI_TRNS_AUTO_CMD23; + val |= ESDHC_MIX_CTRL_AC23EN; + } + m = val | (m & ~ESDHC_MIX_CTRL_SDHCI_MASK); + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + + /* Set watermark levels for PIO access to maximum value + * (128 words) to accommodate full 512 bytes buffer. + * For DMA access restore the levels to default value. + */ + m = readl(host->ioaddr + ESDHC_WTMK_LVL); + if (val & SDHCI_TRNS_DMA) { + wml = ESDHC_WTMK_LVL_WML_VAL_DEF; + } else { + u8 ctrl; + wml = ESDHC_WTMK_LVL_WML_VAL_MAX; + + /* + * Since already disable DMA mode, so also need + * to clear the DMASEL. Otherwise, for standard + * tuning, when send tuning command, usdhc will + * still prefetch the ADMA script from wrong + * DMA address, then we will see IOMMU report + * some error which show lack of TLB mapping. + */ + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } + m &= ~(ESDHC_WTMK_LVL_RD_WML_MASK | + ESDHC_WTMK_LVL_WR_WML_MASK); + m |= (wml << ESDHC_WTMK_LVL_RD_WML_SHIFT) | + (wml << ESDHC_WTMK_LVL_WR_WML_SHIFT); + writel(m, host->ioaddr + ESDHC_WTMK_LVL); + } else { + /* + * Postpone this write, we must do it together with a + * command write that is down below. + */ + imx_data->scratchpad = val; + } + return; + case SDHCI_COMMAND: + if (host->cmd->opcode == MMC_STOP_TRANSMISSION) + val |= SDHCI_CMD_ABORTCMD; + + if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + imx_data->multiblock_status = MULTIBLK_IN_PROCESS; + + if (esdhc_is_usdhc(imx_data)) + writel(val << 16, + host->ioaddr + SDHCI_TRANSFER_MODE); + else + writel(val << 16 | imx_data->scratchpad, + host->ioaddr + SDHCI_TRANSFER_MODE); + return; + case SDHCI_BLOCK_SIZE: + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); + break; + } + esdhc_clrset_le(host, 0xffff, val, reg); +} + +static u8 esdhc_readb_le(struct sdhci_host *host, int reg) +{ + u8 ret; + u32 val; + + switch (reg) { + case SDHCI_HOST_CONTROL: + val = readl(host->ioaddr + reg); + + ret = val & SDHCI_CTRL_LED; + ret |= (val >> 5) & SDHCI_CTRL_DMA_MASK; + ret |= (val & ESDHC_CTRL_4BITBUS); + ret |= (val & ESDHC_CTRL_8BITBUS) << 3; + return ret; + } + + return readb(host->ioaddr + reg); +} + +static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 new_val = 0; + u32 mask; + + switch (reg) { + case SDHCI_POWER_CONTROL: + /* + * FSL put some DMA bits here + * If your board has a regulator, code should be here + */ + return; + case SDHCI_HOST_CONTROL: + /* FSL messed up here, so we need to manually compose it. */ + new_val = val & SDHCI_CTRL_LED; + /* ensure the endianness */ + new_val |= ESDHC_HOST_CONTROL_LE; + /* bits 8&9 are reserved on mx25 */ + if (!is_imx25_esdhc(imx_data)) { + /* DMA mode bits are shifted */ + new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5; + } + + /* + * Do not touch buswidth bits here. This is done in + * esdhc_pltfm_bus_width. + * Do not touch the D3CD bit either which is used for the + * SDIO interrupt erratum workaround. + */ + mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD); + + esdhc_clrset_le(host, mask, new_val, reg); + return; + case SDHCI_SOFTWARE_RESET: + if (val & SDHCI_RESET_DATA) + new_val = readl(host->ioaddr + SDHCI_HOST_CONTROL); + break; + } + esdhc_clrset_le(host, 0xff, val, reg); + + if (reg == SDHCI_SOFTWARE_RESET) { + if (val & SDHCI_RESET_ALL) { + /* + * The esdhc has a design violation to SDHC spec which + * tells that software reset should not affect card + * detection circuit. But esdhc clears its SYSCTL + * register bits [0..2] during the software reset. This + * will stop those clocks that card detection circuit + * relies on. To work around it, we turn the clocks on + * back to keep card detection circuit functional. + */ + esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL); + /* + * The reset on usdhc fails to clear MIX_CTRL register. + * Do it manually here. + */ + if (esdhc_is_usdhc(imx_data)) { + /* + * the tuning bits should be kept during reset + */ + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); + writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK, + host->ioaddr + ESDHC_MIX_CTRL); + imx_data->is_ddr = 0; + } + } else if (val & SDHCI_RESET_DATA) { + /* + * The eSDHC DAT line software reset clears at least the + * data transfer width on i.MX25, so make sure that the + * Host Control register is unaffected. + */ + esdhc_clrset_le(host, 0xff, new_val, + SDHCI_HOST_CONTROL); + } + } +} + +static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + return pltfm_host->clock; +} + +static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + return pltfm_host->clock / 256 / 16; +} + +static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, + unsigned int clock) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + unsigned int host_clock = pltfm_host->clock; + int ddr_pre_div = imx_data->is_ddr ? 2 : 1; + int pre_div = 1; + int div = 1; + int ret; + u32 temp, val; + + if (esdhc_is_usdhc(imx_data)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + esdhc_wait_for_card_clock_gate_off(host); + } + + if (clock == 0) { + host->mmc->actual_clock = 0; + return; + } + + /* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */ + if (is_imx53_esdhc(imx_data)) { + /* + * According to the i.MX53 reference manual, if DLLCTRL[10] can + * be set, then the controller is eSDHCv3, else it is eSDHCv2. + */ + val = readl(host->ioaddr + ESDHC_DLL_CTRL); + writel(val | BIT(10), host->ioaddr + ESDHC_DLL_CTRL); + temp = readl(host->ioaddr + ESDHC_DLL_CTRL); + writel(val, host->ioaddr + ESDHC_DLL_CTRL); + if (temp & BIT(10)) + pre_div = 2; + } + + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN + | ESDHC_CLOCK_MASK); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + + if ((imx_data->socdata->flags & ESDHC_FLAG_ERR010450) && + (!(host->quirks2 & SDHCI_QUIRK2_NO_1_8_V))) { + unsigned int max_clock; + + max_clock = imx_data->is_ddr ? 45000000 : 150000000; + + clock = min(clock, max_clock); + } + + while (host_clock / (16 * pre_div * ddr_pre_div) > clock && + pre_div < 256) + pre_div *= 2; + + while (host_clock / (div * pre_div * ddr_pre_div) > clock && div < 16) + div++; + + host->mmc->actual_clock = host_clock / (div * pre_div * ddr_pre_div); + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->mmc->actual_clock); + + pre_div >>= 1; + div--; + + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN + | (div << ESDHC_DIVIDER_SHIFT) + | (pre_div << ESDHC_PREDIV_SHIFT)); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + + /* need to wait the bit 3 of the PRSSTAT to be set, make sure card clock is stable */ + ret = readl_poll_timeout(host->ioaddr + ESDHC_PRSSTAT, temp, + (temp & ESDHC_CLOCK_STABLE), 2, 100); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), "card clock still not stable in 100us!.\n"); + + if (esdhc_is_usdhc(imx_data)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + } + +} + +static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + + switch (boarddata->wp_type) { + case ESDHC_WP_GPIO: + return mmc_gpio_get_ro(host->mmc); + case ESDHC_WP_CONTROLLER: + return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) & + SDHCI_WRITE_PROTECT); + case ESDHC_WP_NONE: + break; + } + + return -ENOSYS; +} + +static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) +{ + u32 ctrl; + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl = ESDHC_CTRL_8BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl = ESDHC_CTRL_4BITBUS; + break; + default: + ctrl = 0; + break; + } + + esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl, + SDHCI_HOST_CONTROL); +} + +static void esdhc_reset_tuning(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 ctrl; + int ret; + + /* Reset the tuning circuit */ + if (esdhc_is_usdhc(imx_data)) { + ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL); + ctrl &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; + if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { + ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + ctrl &= ~ESDHC_MIX_CTRL_FBCLK_SEL; + writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); + writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); + ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); + ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE; + writel(ctrl, host->ioaddr + SDHCI_AUTO_CMD_STATUS); + /* Make sure ESDHC_MIX_CTRL_EXE_TUNE cleared */ + ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS, + ctrl, !(ctrl & ESDHC_MIX_CTRL_EXE_TUNE), 1, 50); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), + "Warning! clear execute tuning bit failed\n"); + /* + * SDHCI_INT_DATA_AVAIL is W1C bit, set this bit will clear the + * usdhc IP internal logic flag execute_tuning_with_clr_buf, which + * will finally make sure the normal data transfer logic correct. + */ + ctrl = readl(host->ioaddr + SDHCI_INT_STATUS); + ctrl |= SDHCI_INT_DATA_AVAIL; + writel(ctrl, host->ioaddr + SDHCI_INT_STATUS); + } + } +} + +static void usdhc_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + + imx_data->init_card_type = card->type; +} + +static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + int err; + + /* + * i.MX uSDHC internally already uses a fixed optimized timing for + * DDR50, normally does not require tuning for DDR50 mode. + */ + if (host->timing == MMC_TIMING_UHS_DDR50) + return 0; + + /* + * Reset tuning circuit logic. If not, the previous tuning result + * will impact current tuning, make current tuning can't set the + * correct delay cell. + */ + esdhc_reset_tuning(host); + err = sdhci_execute_tuning(mmc, opcode); + /* If tuning done, enable auto tuning */ + if (!err && !host->tuning_err) + usdhc_auto_tuning_mode_sel_and_en(host); + + return err; +} + +static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) +{ + u32 reg; + u8 sw_rst; + int ret; + + /* FIXME: delay a bit for card to be ready for next tuning due to errors */ + mdelay(1); + + /* IC suggest to reset USDHC before every tuning command */ + esdhc_clrset_le(host, 0xff, SDHCI_RESET_ALL, SDHCI_SOFTWARE_RESET); + ret = readb_poll_timeout(host->ioaddr + SDHCI_SOFTWARE_RESET, sw_rst, + !(sw_rst & SDHCI_RESET_ALL), 10, 100); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), + "warning! RESET_ALL never complete before sending tuning command\n"); + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL | + ESDHC_MIX_CTRL_FBCLK_SEL; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); + writel(val << 8, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + dev_dbg(mmc_dev(host->mmc), + "tuning with delay 0x%x ESDHC_TUNE_CTRL_STATUS 0x%x\n", + val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS)); +} + +static void esdhc_post_tuning(struct sdhci_host *host) +{ + u32 reg; + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg &= ~ESDHC_MIX_CTRL_EXE_TUNE; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); +} + +static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode) +{ + int min, max, avg, ret; + + /* find the mininum delay first which can pass tuning */ + min = ESDHC_TUNE_CTRL_MIN; + while (min < ESDHC_TUNE_CTRL_MAX) { + esdhc_prepare_tuning(host, min); + if (!mmc_send_tuning(host->mmc, opcode, NULL)) + break; + min += ESDHC_TUNE_CTRL_STEP; + } + + /* find the maxinum delay which can not pass tuning */ + max = min + ESDHC_TUNE_CTRL_STEP; + while (max < ESDHC_TUNE_CTRL_MAX) { + esdhc_prepare_tuning(host, max); + if (mmc_send_tuning(host->mmc, opcode, NULL)) { + max -= ESDHC_TUNE_CTRL_STEP; + break; + } + max += ESDHC_TUNE_CTRL_STEP; + } + + /* use average delay to get the best timing */ + avg = (min + max) / 2; + esdhc_prepare_tuning(host, avg); + ret = mmc_send_tuning(host->mmc, opcode, NULL); + esdhc_post_tuning(host); + + dev_dbg(mmc_dev(host->mmc), "tuning %s at 0x%x ret %d\n", + ret ? "failed" : "passed", avg, ret); + + return ret; +} + +static void esdhc_hs400_enhanced_strobe(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 m; + + m = readl(host->ioaddr + ESDHC_MIX_CTRL); + if (ios->enhanced_strobe) + m |= ESDHC_MIX_CTRL_HS400_ES_EN; + else + m &= ~ESDHC_MIX_CTRL_HS400_ES_EN; + writel(m, host->ioaddr + ESDHC_MIX_CTRL); +} + +static int esdhc_change_pinstate(struct sdhci_host *host, + unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + struct pinctrl_state *pinctrl; + + dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs); + + if (IS_ERR(imx_data->pinctrl) || + IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) + return -EINVAL; + + switch (uhs) { + case MMC_TIMING_UHS_SDR50: + case MMC_TIMING_UHS_DDR50: + pinctrl = imx_data->pins_100mhz; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + case MMC_TIMING_MMC_HS400: + pinctrl = imx_data->pins_200mhz; + break; + default: + /* back to default state for other legacy timing */ + return pinctrl_select_default_state(mmc_dev(host->mmc)); + } + + return pinctrl_select_state(imx_data->pinctrl, pinctrl); +} + +/* + * For HS400 eMMC, there is a data_strobe line. This signal is generated + * by the device and used for data output and CRC status response output + * in HS400 mode. The frequency of this signal follows the frequency of + * CLK generated by host. The host receives the data which is aligned to the + * edge of data_strobe line. Due to the time delay between CLK line and + * data_strobe line, if the delay time is larger than one clock cycle, + * then CLK and data_strobe line will be misaligned, read error shows up. + */ +static void esdhc_set_strobe_dll(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 strobe_delay; + u32 v; + int ret; + + /* disable clock before enabling strobe dll */ + writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) & + ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + esdhc_wait_for_card_clock_gate_off(host); + + /* force a reset on strobe dll */ + writel(ESDHC_STROBE_DLL_CTRL_RESET, + host->ioaddr + ESDHC_STROBE_DLL_CTRL); + /* clear the reset bit on strobe dll before any setting */ + writel(0, host->ioaddr + ESDHC_STROBE_DLL_CTRL); + + /* + * enable strobe dll ctrl and adjust the delay target + * for the uSDHC loopback read clock + */ + if (imx_data->boarddata.strobe_dll_delay_target) + strobe_delay = imx_data->boarddata.strobe_dll_delay_target; + else + strobe_delay = ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT; + v = ESDHC_STROBE_DLL_CTRL_ENABLE | + ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT | + (strobe_delay << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT); + writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL); + + /* wait max 50us to get the REF/SLV lock */ + ret = readl_poll_timeout(host->ioaddr + ESDHC_STROBE_DLL_STATUS, v, + ((v & ESDHC_STROBE_DLL_STS_REF_LOCK) && (v & ESDHC_STROBE_DLL_STS_SLV_LOCK)), 1, 50); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), + "warning! HS400 strobe DLL status REF/SLV not lock in 50us, STROBE DLL status is %x!\n", v); +} + +static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) +{ + u32 m; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + + /* disable ddr mode and disable HS400 mode */ + m = readl(host->ioaddr + ESDHC_MIX_CTRL); + m &= ~(ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN); + imx_data->is_ddr = 0; + + switch (timing) { + case MMC_TIMING_UHS_SDR12: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_SDR50: + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS: + case MMC_TIMING_MMC_HS200: + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + m |= ESDHC_MIX_CTRL_DDREN; + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + imx_data->is_ddr = 1; + if (boarddata->delay_line) { + u32 v; + v = boarddata->delay_line << + ESDHC_DLL_OVERRIDE_VAL_SHIFT | + (1 << ESDHC_DLL_OVERRIDE_EN_SHIFT); + if (is_imx53_esdhc(imx_data)) + v <<= 1; + writel(v, host->ioaddr + ESDHC_DLL_CTRL); + } + break; + case MMC_TIMING_MMC_HS400: + m |= ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN; + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + imx_data->is_ddr = 1; + /* update clock after enable DDR for strobe DLL lock */ + host->ops->set_clock(host, host->clock); + esdhc_set_strobe_dll(host); + break; + case MMC_TIMING_LEGACY: + default: + esdhc_reset_tuning(host); + break; + } + + esdhc_change_pinstate(host, timing); +} + +static void esdhc_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_and_cqhci_reset(host, mask); + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + +static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + + /* Doc Erratum: the uSDHC actual maximum timeout count is 1 << 29 */ + return esdhc_is_usdhc(imx_data) ? 1 << 29 : 1 << 27; +} + +static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + + /* use maximum timeout counter */ + esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK, + esdhc_is_usdhc(imx_data) ? 0xF : 0xE, + SDHCI_TIMEOUT_CONTROL); +} + +static u32 esdhc_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + +static struct sdhci_ops sdhci_esdhc_ops = { + .read_l = esdhc_readl_le, + .read_w = esdhc_readw_le, + .read_b = esdhc_readb_le, + .write_l = esdhc_writel_le, + .write_w = esdhc_writew_le, + .write_b = esdhc_writeb_le, + .set_clock = esdhc_pltfm_set_clock, + .get_max_clock = esdhc_pltfm_get_max_clock, + .get_min_clock = esdhc_pltfm_get_min_clock, + .get_max_timeout_count = esdhc_get_max_timeout_count, + .get_ro = esdhc_pltfm_get_ro, + .set_timeout = esdhc_set_timeout, + .set_bus_width = esdhc_pltfm_set_bus_width, + .set_uhs_signaling = esdhc_set_uhs_signaling, + .reset = esdhc_reset, + .irq = esdhc_cqhci_irq, + .dump_vendor_regs = esdhc_dump_debug_regs, +}; + +static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC + | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC + | SDHCI_QUIRK_BROKEN_CARD_DETECTION, + .ops = &sdhci_esdhc_ops, +}; + +static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + struct cqhci_host *cq_host = host->mmc->cqe_private; + u32 tmp; + + if (esdhc_is_usdhc(imx_data)) { + /* + * The imx6q ROM code will change the default watermark + * level setting to something insane. Change it back here. + */ + writel(ESDHC_WTMK_DEFAULT_VAL, host->ioaddr + ESDHC_WTMK_LVL); + + /* + * ROM code will change the bit burst_length_enable setting + * to zero if this usdhc is chosen to boot system. Change + * it back here, otherwise it will impact the performance a + * lot. This bit is used to enable/disable the burst length + * for the external AHB2AXI bridge. It's useful especially + * for INCR transfer because without burst length indicator, + * the AHB2AXI bridge does not know the burst length in + * advance. And without burst length indicator, AHB INCR + * transfer can only be converted to singles on the AXI side. + */ + writel(readl(host->ioaddr + SDHCI_HOST_CONTROL) + | ESDHC_BURST_LEN_EN_INCR, + host->ioaddr + SDHCI_HOST_CONTROL); + + /* + * erratum ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL + * TO1.1, it's harmless for MX6SL + */ + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_ERR004536)) { + writel(readl(host->ioaddr + 0x6c) & ~BIT(7), + host->ioaddr + 0x6c); + } + + /* disable DLL_CTRL delay line settings */ + writel(0x0, host->ioaddr + ESDHC_DLL_CTRL); + + /* + * For the case of command with busy, if set the bit + * ESDHC_VEND_SPEC2_EN_BUSY_IRQ, USDHC will generate a + * transfer complete interrupt when busy is deasserted. + * When CQHCI use DCMD to send a CMD need R1b respons, + * CQHCI require to set ESDHC_VEND_SPEC2_EN_BUSY_IRQ, + * otherwise DCMD will always meet timeout waiting for + * hardware interrupt issue. + */ + if (imx_data->socdata->flags & ESDHC_FLAG_CQHCI) { + tmp = readl(host->ioaddr + ESDHC_VEND_SPEC2); + tmp |= ESDHC_VEND_SPEC2_EN_BUSY_IRQ; + writel(tmp, host->ioaddr + ESDHC_VEND_SPEC2); + + host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; + } + + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL); + tmp |= ESDHC_STD_TUNING_EN; + + /* + * ROM code or bootloader may config the start tap + * and step, unmask them first. + */ + tmp &= ~(ESDHC_TUNING_START_TAP_MASK | ESDHC_TUNING_STEP_MASK); + if (imx_data->boarddata.tuning_start_tap) + tmp |= imx_data->boarddata.tuning_start_tap; + else + tmp |= ESDHC_TUNING_START_TAP_DEFAULT; + + if (imx_data->boarddata.tuning_step) { + tmp |= imx_data->boarddata.tuning_step + << ESDHC_TUNING_STEP_SHIFT; + } else { + tmp |= ESDHC_TUNING_STEP_DEFAULT + << ESDHC_TUNING_STEP_SHIFT; + } + + /* Disable the CMD CRC check for tuning, if not, need to + * add some delay after every tuning command, because + * hardware standard tuning logic will directly go to next + * step once it detect the CMD CRC error, will not wait for + * the card side to finally send out the tuning data, trigger + * the buffer read ready interrupt immediately. If usdhc send + * the next tuning command some eMMC card will stuck, can't + * response, block the tuning procedure or the first command + * after the whole tuning procedure always can't get any response. + */ + tmp |= ESDHC_TUNING_CMD_CRC_CHECK_DISABLE; + writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL); + } else if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { + /* + * ESDHC_STD_TUNING_EN may be configed in bootloader + * or ROM code, so clear this bit here to make sure + * the manual tuning can work. + */ + tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL); + tmp &= ~ESDHC_STD_TUNING_EN; + writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL); + } + + /* + * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card + * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let + * the 1st linux configure power/clock for the 2nd Linux. + * + * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux + * to destroy the 2nd linux, then restart the 2nd linux, we met SDHCI dump. + * After we clear the pending interrupt and halt CQCTL, issue gone. + */ + if (cq_host) { + tmp = cqhci_readl(cq_host, CQHCI_IS); + cqhci_writel(cq_host, tmp, CQHCI_IS); + cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL); + } + } +} + +static void esdhc_cqe_enable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct cqhci_host *cq_host = mmc->cqe_private; + u32 reg; + u16 mode; + int count = 10; + + /* + * CQE gets stuck if it sees Buffer Read Enable bit set, which can be + * the case after tuning, so ensure the buffer is drained. + */ + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + while (reg & SDHCI_DATA_AVAILABLE) { + sdhci_readl(host, SDHCI_BUFFER); + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + if (count-- == 0) { + dev_warn(mmc_dev(host->mmc), + "CQE may get stuck because the Buffer Read Enable bit is set\n"); + break; + } + mdelay(1); + } + + /* + * Runtime resume will reset the entire host controller, which + * will also clear the DMAEN/BCEN of register ESDHC_MIX_CTRL. + * Here set DMAEN and BCEN when enable CMDQ. + */ + mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_TRNS_DMA; + if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE)) + mode |= SDHCI_TRNS_BLK_CNT_EN; + sdhci_writew(host, mode, SDHCI_TRANSFER_MODE); + + /* + * Though Runtime resume reset the entire host controller, + * but do not impact the CQHCI side, need to clear the + * HALT bit, avoid CQHCI stuck in the first request when + * system resume back. + */ + cqhci_writel(cq_host, 0, CQHCI_CTL); + if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) + dev_err(mmc_dev(host->mmc), + "failed to exit halt state when enable CQE\n"); + + + sdhci_cqe_enable(mmc); +} + +static void esdhc_sdhci_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static const struct cqhci_host_ops esdhc_cqhci_ops = { + .enable = esdhc_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = esdhc_sdhci_dumpregs, +}; + +static int +sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, + struct sdhci_host *host, + struct pltfm_imx_data *imx_data) +{ + struct device_node *np = pdev->dev.of_node; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + int ret; + + if (of_property_read_bool(np, "fsl,wp-controller")) + boarddata->wp_type = ESDHC_WP_CONTROLLER; + + /* + * If we have this property, then activate WP check. + * Retrieveing and requesting the actual WP GPIO will happen + * in the call to mmc_of_parse(). + */ + if (of_property_read_bool(np, "wp-gpios")) + boarddata->wp_type = ESDHC_WP_GPIO; + + of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step); + of_property_read_u32(np, "fsl,tuning-start-tap", + &boarddata->tuning_start_tap); + + of_property_read_u32(np, "fsl,strobe-dll-delay-target", + &boarddata->strobe_dll_delay_target); + if (of_property_read_bool(np, "no-1-8-v")) + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + + if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) + boarddata->delay_line = 0; + + mmc_of_parse_voltage(host->mmc, &host->ocr_mask); + + if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pinctrl)) { + imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_100MHZ); + imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_200MHZ); + } + + /* call to generic mmc_of_parse to support additional capabilities */ + ret = mmc_of_parse(host->mmc); + if (ret) + return ret; + + /* HS400/HS400ES require 8 bit bus */ + if (!(host->mmc->caps & MMC_CAP_8_BIT_DATA)) + host->mmc->caps2 &= ~(MMC_CAP2_HS400 | MMC_CAP2_HS400_ES); + + if (mmc_gpio_get_cd(host->mmc) >= 0) + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + + return 0; +} + +static int sdhci_esdhc_imx_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_host *host; + struct cqhci_host *cq_host; + int err; + struct pltfm_imx_data *imx_data; + + host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, + sizeof(*imx_data)); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + + imx_data = sdhci_pltfm_priv(pltfm_host); + + imx_data->socdata = device_get_match_data(&pdev->dev); + + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0); + + imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(imx_data->clk_ipg)) { + err = PTR_ERR(imx_data->clk_ipg); + goto free_sdhci; + } + + imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(imx_data->clk_ahb)) { + err = PTR_ERR(imx_data->clk_ahb); + goto free_sdhci; + } + + imx_data->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(imx_data->clk_per)) { + err = PTR_ERR(imx_data->clk_per); + goto free_sdhci; + } + + pltfm_host->clk = imx_data->clk_per; + pltfm_host->clock = clk_get_rate(pltfm_host->clk); + err = clk_prepare_enable(imx_data->clk_per); + if (err) + goto free_sdhci; + err = clk_prepare_enable(imx_data->clk_ipg); + if (err) + goto disable_per_clk; + err = clk_prepare_enable(imx_data->clk_ahb); + if (err) + goto disable_ipg_clk; + + imx_data->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(imx_data->pinctrl)) + dev_warn(mmc_dev(host->mmc), "could not get pinctrl\n"); + + if (esdhc_is_usdhc(imx_data)) { + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; + + /* GPIO CD can be set as a wakeup source */ + host->mmc->caps |= MMC_CAP_CD_WAKE; + + if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200)) + host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; + + /* clear tuning bits in case ROM has set it already */ + writel(0x0, host->ioaddr + ESDHC_MIX_CTRL); + writel(0x0, host->ioaddr + SDHCI_AUTO_CMD_STATUS); + writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + + /* + * Link usdhc specific mmc_host_ops execute_tuning function, + * to replace the standard one in sdhci_ops. + */ + host->mmc_host_ops.execute_tuning = usdhc_execute_tuning; + + /* + * Link usdhc specific mmc_host_ops init card function, + * to distinguish the card type. + */ + host->mmc_host_ops.init_card = usdhc_init_card; + } + + if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) + sdhci_esdhc_ops.platform_execute_tuning = + esdhc_executing_tuning; + + if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536) + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; + + if (imx_data->socdata->flags & ESDHC_FLAG_HS400) + host->mmc->caps2 |= MMC_CAP2_HS400; + + if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23) + host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN; + + if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) { + host->mmc->caps2 |= MMC_CAP2_HS400_ES; + host->mmc_host_ops.hs400_enhanced_strobe = + esdhc_hs400_enhanced_strobe; + } + + if (imx_data->socdata->flags & ESDHC_FLAG_CQHCI) { + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL); + if (!cq_host) { + err = -ENOMEM; + goto disable_ahb_clk; + } + + cq_host->mmio = host->ioaddr + ESDHC_CQHCI_ADDR_OFFSET; + cq_host->ops = &esdhc_cqhci_ops; + + err = cqhci_init(cq_host, host->mmc, false); + if (err) + goto disable_ahb_clk; + } + + err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); + if (err) + goto disable_ahb_clk; + + sdhci_esdhc_imx_hwinit(host); + + err = sdhci_add_host(host); + if (err) + goto disable_ahb_clk; + + /* + * Setup the wakeup capability here, let user to decide + * whether need to enable this wakeup through sysfs interface. + */ + if ((host->mmc->pm_caps & MMC_PM_KEEP_POWER) && + (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)) + device_set_wakeup_capable(&pdev->dev, true); + + pm_runtime_set_active(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + pm_runtime_enable(&pdev->dev); + + return 0; + +disable_ahb_clk: + clk_disable_unprepare(imx_data->clk_ahb); +disable_ipg_clk: + clk_disable_unprepare(imx_data->clk_ipg); +disable_per_clk: + clk_disable_unprepare(imx_data->clk_per); +free_sdhci: + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + cpu_latency_qos_remove_request(&imx_data->pm_qos_req); + sdhci_pltfm_free(pdev); + return err; +} + +static void sdhci_esdhc_imx_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + int dead; + + pm_runtime_get_sync(&pdev->dev); + dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + sdhci_remove_host(host, dead); + + clk_disable_unprepare(imx_data->clk_per); + clk_disable_unprepare(imx_data->clk_ipg); + clk_disable_unprepare(imx_data->clk_ahb); + + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + cpu_latency_qos_remove_request(&imx_data->pm_qos_req); + + sdhci_pltfm_free(pdev); +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_esdhc_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + int ret; + + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } + + if ((imx_data->socdata->flags & ESDHC_FLAG_STATE_LOST_IN_LPMODE) && + (host->tuning_mode != SDHCI_TUNING_MODE_1)) { + mmc_retune_timer_stop(host->mmc); + mmc_retune_needed(host->mmc); + } + + if (host->tuning_mode != SDHCI_TUNING_MODE_3) + mmc_retune_needed(host->mmc); + + ret = sdhci_suspend_host(host); + if (ret) + return ret; + + ret = pinctrl_pm_select_sleep_state(dev); + if (ret) + return ret; + + ret = mmc_gpio_set_cd_wake(host->mmc, true); + + return ret; +} + +static int sdhci_esdhc_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + int ret; + + ret = pinctrl_pm_select_default_state(dev); + if (ret) + return ret; + + /* re-initialize hw state in case it's lost in low power mode */ + sdhci_esdhc_imx_hwinit(host); + + ret = sdhci_resume_host(host); + if (ret) + return ret; + + if (host->mmc->caps2 & MMC_CAP2_CQE) + ret = cqhci_resume(host->mmc); + + if (!ret) + ret = mmc_gpio_set_cd_wake(host->mmc, false); + + return ret; +} +#endif + +#ifdef CONFIG_PM +static int sdhci_esdhc_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + int ret; + + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } + + ret = sdhci_runtime_suspend_host(host); + if (ret) + return ret; + + if (host->tuning_mode != SDHCI_TUNING_MODE_3) + mmc_retune_needed(host->mmc); + + imx_data->actual_clock = host->mmc->actual_clock; + esdhc_pltfm_set_clock(host, 0); + clk_disable_unprepare(imx_data->clk_per); + clk_disable_unprepare(imx_data->clk_ipg); + clk_disable_unprepare(imx_data->clk_ahb); + + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + cpu_latency_qos_remove_request(&imx_data->pm_qos_req); + + return ret; +} + +static int sdhci_esdhc_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + int err; + + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0); + + if (imx_data->socdata->flags & ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME) + clk_set_rate(imx_data->clk_per, pltfm_host->clock); + + err = clk_prepare_enable(imx_data->clk_ahb); + if (err) + goto remove_pm_qos_request; + + err = clk_prepare_enable(imx_data->clk_per); + if (err) + goto disable_ahb_clk; + + err = clk_prepare_enable(imx_data->clk_ipg); + if (err) + goto disable_per_clk; + + esdhc_pltfm_set_clock(host, imx_data->actual_clock); + + err = sdhci_runtime_resume_host(host, 0); + if (err) + goto disable_ipg_clk; + + if (host->mmc->caps2 & MMC_CAP2_CQE) + err = cqhci_resume(host->mmc); + + return err; + +disable_ipg_clk: + clk_disable_unprepare(imx_data->clk_ipg); +disable_per_clk: + clk_disable_unprepare(imx_data->clk_per); +disable_ahb_clk: + clk_disable_unprepare(imx_data->clk_ahb); +remove_pm_qos_request: + if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS) + cpu_latency_qos_remove_request(&imx_data->pm_qos_req); + return err; +} +#endif + +static const struct dev_pm_ops sdhci_esdhc_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_esdhc_suspend, sdhci_esdhc_resume) + SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend, + sdhci_esdhc_runtime_resume, NULL) +}; + +static struct platform_driver sdhci_esdhc_imx_driver = { + .driver = { + .name = "sdhci-esdhc-imx", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = imx_esdhc_dt_ids, + .pm = &sdhci_esdhc_pmops, + }, + .probe = sdhci_esdhc_imx_probe, + .remove_new = sdhci_esdhc_imx_remove, +}; + +module_platform_driver(sdhci_esdhc_imx_driver); + +MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC"); +MODULE_AUTHOR("Wolfram Sang "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3